?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
USB: serial: don't call release without attach
[linux-2.6/next.git] / drivers / net / sun3lance.c
blob0ca4241b4f63e3ac64f3947e7b24a5890725a07c
1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
2 /*
3
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
7
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
13
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
17
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
21
22 */
23
24 static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
25
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
40
41 #include <asm/cacheflush.h>
42 #include <asm/setup.h>
43 #include <asm/irq.h>
44 #include <asm/io.h>
45 #include <asm/pgtable.h>
46 #include <asm/dvma.h>
47 #include <asm/idprom.h>
48 #include <asm/machines.h>
49
50 #ifdef CONFIG_SUN3
51 #include <asm/sun3mmu.h>
52 #else
53 #include <asm/sun3xprom.h>
54 #endif
55
56 /* sun3/60 addr/irq for the lance chip. If your sun is different,
57 change this. */
58 #define LANCE_OBIO 0x120000
59 #define LANCE_IRQ IRQ_AUTO_3
60
61 /* Debug level:
62 * 0 = silent, print only serious errors
63 * 1 = normal, print error messages
64 * 2 = debug, print debug infos
65 * 3 = debug, print even more debug infos (packet data)
66 */
67
68 #define LANCE_DEBUG 0
69
70 #ifdef LANCE_DEBUG
71 static int lance_debug = LANCE_DEBUG;
72 #else
73 static int lance_debug = 1;
74 #endif
75 module_param(lance_debug, int, 0);
76 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
77 MODULE_LICENSE("GPL");
78
79 #define DPRINTK(n,a) \
80 do { \
81 if (lance_debug >= n) \
82 printk a; \
83 } while( 0 )
84
85
86 /* we're only using 32k of memory, so we use 4 TX
87 buffers and 16 RX buffers. These values are expressed as log2. */
88
89 #define TX_LOG_RING_SIZE 3
90 #define RX_LOG_RING_SIZE 5
91
92 /* These are the derived values */
93
94 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
95 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
96 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
97
98 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
99 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
100 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
101
102 /* Definitions for packet buffer access: */
103 #define PKT_BUF_SZ 1544
104
105 /* Get the address of a packet buffer corresponding to a given buffer head */
106 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
107
108
109 /* The LANCE Rx and Tx ring descriptors. */
110 struct lance_rx_head {
111 unsigned short base; /* Low word of base addr */
112 volatile unsigned char flag;
113 unsigned char base_hi; /* High word of base addr (unused) */
114 short buf_length; /* This length is 2s complement! */
115 volatile short msg_length; /* This length is "normal". */
116 };
117
118 struct lance_tx_head {
119 unsigned short base; /* Low word of base addr */
120 volatile unsigned char flag;
121 unsigned char base_hi; /* High word of base addr (unused) */
122 short length; /* Length is 2s complement! */
123 volatile short misc;
124 };
125
126 /* The LANCE initialization block, described in databook. */
127 struct lance_init_block {
128 unsigned short mode; /* Pre-set mode */
129 unsigned char hwaddr[6]; /* Physical ethernet address */
130 unsigned int filter[2]; /* Multicast filter (unused). */
131 /* Receive and transmit ring base, along with length bits. */
132 unsigned short rdra;
133 unsigned short rlen;
134 unsigned short tdra;
135 unsigned short tlen;
136 unsigned short pad[4]; /* is thie needed? */
137 };
138
139 /* The whole layout of the Lance shared memory */
140 struct lance_memory {
141 struct lance_init_block init;
142 struct lance_tx_head tx_head[TX_RING_SIZE];
143 struct lance_rx_head rx_head[RX_RING_SIZE];
144 char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
145 char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
146 };
147
148 /* The driver's private device structure */
149
150 struct lance_private {
151 volatile unsigned short *iobase;
152 struct lance_memory *mem;
153 int new_rx, new_tx; /* The next free ring entry */
154 int old_tx, old_rx; /* ring entry to be processed */
155 /* These two must be longs for set_bit() */
156 long tx_full;
157 long lock;
158 };
159
160 /* I/O register access macros */
161
162 #define MEM lp->mem
163 #define DREG lp->iobase[0]
164 #define AREG lp->iobase[1]
165 #define REGA(a) (*( AREG = (a), &DREG ))
166
167 /* Definitions for the Lance */
168
169 /* tx_head flags */
170 #define TMD1_ENP 0x01 /* end of packet */
171 #define TMD1_STP 0x02 /* start of packet */
172 #define TMD1_DEF 0x04 /* deferred */
173 #define TMD1_ONE 0x08 /* one retry needed */
174 #define TMD1_MORE 0x10 /* more than one retry needed */
175 #define TMD1_ERR 0x40 /* error summary */
176 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
177
178 #define TMD1_OWN_CHIP TMD1_OWN
179 #define TMD1_OWN_HOST 0
180
181 /* tx_head misc field */
182 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
183 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
184 #define TMD3_LCAR 0x0800 /* carrier lost */
185 #define TMD3_LCOL 0x1000 /* late collision */
186 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
187 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
188
189 /* rx_head flags */
190 #define RMD1_ENP 0x01 /* end of packet */
191 #define RMD1_STP 0x02 /* start of packet */
192 #define RMD1_BUFF 0x04 /* buffer error */
193 #define RMD1_CRC 0x08 /* CRC error */
194 #define RMD1_OFLO 0x10 /* overflow */
195 #define RMD1_FRAM 0x20 /* framing error */
196 #define RMD1_ERR 0x40 /* error summary */
197 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
198
199 #define RMD1_OWN_CHIP RMD1_OWN
200 #define RMD1_OWN_HOST 0
201
202 /* register names */
203 #define CSR0 0 /* mode/status */
204 #define CSR1 1 /* init block addr (low) */
205 #define CSR2 2 /* init block addr (high) */
206 #define CSR3 3 /* misc */
207 #define CSR8 8 /* address filter */
208 #define CSR15 15 /* promiscuous mode */
209
210 /* CSR0 */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT 0x0001 /* initialize (RS) */
213 #define CSR0_STRT 0x0002 /* start (RS) */
214 #define CSR0_STOP 0x0004 /* stop (RS) */
215 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
216 #define CSR0_TXON 0x0010 /* transmitter on (R) */
217 #define CSR0_RXON 0x0020 /* receiver on (R) */
218 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
219 #define CSR0_INTR 0x0080 /* interrupt active (R) */
220 #define CSR0_IDON 0x0100 /* initialization done (RC) */
221 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
222 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
223 #define CSR0_MERR 0x0800 /* memory error (RC) */
224 #define CSR0_MISS 0x1000 /* missed frame (RC) */
225 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR 0x8000 /* error (RC) */
228
229 /* CSR3 */
230 #define CSR3_BCON 0x0001 /* byte control */
231 #define CSR3_ACON 0x0002 /* ALE control */
232 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
233
234 /***************************** Prototypes *****************************/
235
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
240 static irqreturn_t lance_interrupt( int irq, void *dev_id);
241 static int lance_rx( struct net_device *dev );
242 static int lance_close( struct net_device *dev );
243 static void set_multicast_list( struct net_device *dev );
244
245 /************************* End of Prototypes **************************/
246
247 struct net_device * __init sun3lance_probe(int unit)
248 {
249 struct net_device *dev;
250 static int found;
251 int err = -ENODEV;
252
253 if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
254 return ERR_PTR(-ENODEV);
255
256 /* check that this machine has an onboard lance */
257 switch(idprom->id_machtype) {
258 case SM_SUN3|SM_3_50:
259 case SM_SUN3|SM_3_60:
260 case SM_SUN3X|SM_3_80:
261 /* these machines have lance */
262 break;
263
264 default:
265 return ERR_PTR(-ENODEV);
266 }
267
268 if (found)
269 return ERR_PTR(-ENODEV);
270
271 dev = alloc_etherdev(sizeof(struct lance_private));
272 if (!dev)
273 return ERR_PTR(-ENOMEM);
274 if (unit >= 0) {
275 sprintf(dev->name, "eth%d", unit);
276 netdev_boot_setup_check(dev);
277 }
278
279 if (!lance_probe(dev))
280 goto out;
281
282 err = register_netdev(dev);
283 if (err)
284 goto out1;
285 found = 1;
286 return dev;
287
288 out1:
289 #ifdef CONFIG_SUN3
290 iounmap((void __iomem *)dev->base_addr);
291 #endif
292 out:
293 free_netdev(dev);
294 return ERR_PTR(err);
295 }
296
297 static const struct net_device_ops lance_netdev_ops = {
298 .ndo_open = lance_open,
299 .ndo_stop = lance_close,
300 .ndo_start_xmit = lance_start_xmit,
301 .ndo_set_multicast_list = set_multicast_list,
302 .ndo_set_mac_address = NULL,
303 .ndo_change_mtu = eth_change_mtu,
304 .ndo_validate_addr = eth_validate_addr,
305 };
306
307 static int __init lance_probe( struct net_device *dev)
308 {
309 unsigned long ioaddr;
310
311 struct lance_private *lp;
312 int i;
313 static int did_version;
314 volatile unsigned short *ioaddr_probe;
315 unsigned short tmp1, tmp2;
316
317 #ifdef CONFIG_SUN3
318 ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
319 if (!ioaddr)
320 return 0;
321 #else
322 ioaddr = SUN3X_LANCE;
323 #endif
324
325 /* test to see if there's really a lance here */
326 /* (CSRO_INIT shouldn't be readable) */
327
328 ioaddr_probe = (volatile unsigned short *)ioaddr;
329 tmp1 = ioaddr_probe[0];
330 tmp2 = ioaddr_probe[1];
331
332 ioaddr_probe[1] = CSR0;
333 ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
334
335 if(ioaddr_probe[0] != CSR0_STOP) {
336 ioaddr_probe[0] = tmp1;
337 ioaddr_probe[1] = tmp2;
338
339 #ifdef CONFIG_SUN3
340 iounmap((void __iomem *)ioaddr);
341 #endif
342 return 0;
343 }
344
345 lp = netdev_priv(dev);
346
347 /* XXX - leak? */
348 MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
349 if (MEM == NULL) {
350 #ifdef CONFIG_SUN3
351 iounmap((void __iomem *)ioaddr);
352 #endif
353 printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
354 return 0;
355 }
356
357 lp->iobase = (volatile unsigned short *)ioaddr;
358 dev->base_addr = (unsigned long)ioaddr; /* informational only */
359
360 REGA(CSR0) = CSR0_STOP;
361
362 if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) {
363 #ifdef CONFIG_SUN3
364 iounmap((void __iomem *)ioaddr);
365 #endif
366 dvma_free((void *)MEM);
367 printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
368 return 0;
369 }
370 dev->irq = (unsigned short)LANCE_IRQ;
371
372
373 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
374 dev->name,
375 (unsigned long)ioaddr,
376 (unsigned long)MEM,
377 dev->irq);
378
379 /* copy in the ethernet address from the prom */
380 for(i = 0; i < 6 ; i++)
381 dev->dev_addr[i] = idprom->id_ethaddr[i];
382
383 /* tell the card it's ether address, bytes swapped */
384 MEM->init.hwaddr[0] = dev->dev_addr[1];
385 MEM->init.hwaddr[1] = dev->dev_addr[0];
386 MEM->init.hwaddr[2] = dev->dev_addr[3];
387 MEM->init.hwaddr[3] = dev->dev_addr[2];
388 MEM->init.hwaddr[4] = dev->dev_addr[5];
389 MEM->init.hwaddr[5] = dev->dev_addr[4];
390
391 printk("%pM\n", dev->dev_addr);
392
393 MEM->init.mode = 0x0000;
394 MEM->init.filter[0] = 0x00000000;
395 MEM->init.filter[1] = 0x00000000;
396 MEM->init.rdra = dvma_vtob(MEM->rx_head);
397 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
398 (dvma_vtob(MEM->rx_head) >> 16);
399 MEM->init.tdra = dvma_vtob(MEM->tx_head);
400 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
401 (dvma_vtob(MEM->tx_head) >> 16);
402
403 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
404 dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
405 (dvma_vtob(MEM->tx_head))));
406
407 if (did_version++ == 0)
408 printk( version );
409
410 dev->netdev_ops = &lance_netdev_ops;
411 // KLUDGE -- REMOVE ME
412 set_bit(__LINK_STATE_PRESENT, &dev->state);
413
414
415 return 1;
416 }
417
418 static int lance_open( struct net_device *dev )
419 {
420 struct lance_private *lp = netdev_priv(dev);
421 int i;
422
423 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
424
425 REGA(CSR0) = CSR0_STOP;
426
427 lance_init_ring(dev);
428
429 /* From now on, AREG is kept to point to CSR0 */
430 REGA(CSR0) = CSR0_INIT;
431
432 i = 1000000;
433 while (--i > 0)
434 if (DREG & CSR0_IDON)
435 break;
436 if (i <= 0 || (DREG & CSR0_ERR)) {
437 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
438 dev->name, i, DREG ));
439 DREG = CSR0_STOP;
440 return( -EIO );
441 }
442
443 DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
444
445 netif_start_queue(dev);
446
447 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
448
449 return( 0 );
450 }
451
452
453 /* Initialize the LANCE Rx and Tx rings. */
454
455 static void lance_init_ring( struct net_device *dev )
456 {
457 struct lance_private *lp = netdev_priv(dev);
458 int i;
459
460 lp->lock = 0;
461 lp->tx_full = 0;
462 lp->new_rx = lp->new_tx = 0;
463 lp->old_rx = lp->old_tx = 0;
464
465 for( i = 0; i < TX_RING_SIZE; i++ ) {
466 MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
467 MEM->tx_head[i].flag = 0;
468 MEM->tx_head[i].base_hi =
469 (dvma_vtob(MEM->tx_data[i])) >>16;
470 MEM->tx_head[i].length = 0;
471 MEM->tx_head[i].misc = 0;
472 }
473
474 for( i = 0; i < RX_RING_SIZE; i++ ) {
475 MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
476 MEM->rx_head[i].flag = RMD1_OWN_CHIP;
477 MEM->rx_head[i].base_hi =
478 (dvma_vtob(MEM->rx_data[i])) >> 16;
479 MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
480 MEM->rx_head[i].msg_length = 0;
481 }
482
483 /* tell the card it's ether address, bytes swapped */
484 MEM->init.hwaddr[0] = dev->dev_addr[1];
485 MEM->init.hwaddr[1] = dev->dev_addr[0];
486 MEM->init.hwaddr[2] = dev->dev_addr[3];
487 MEM->init.hwaddr[3] = dev->dev_addr[2];
488 MEM->init.hwaddr[4] = dev->dev_addr[5];
489 MEM->init.hwaddr[5] = dev->dev_addr[4];
490
491 MEM->init.mode = 0x0000;
492 MEM->init.filter[0] = 0x00000000;
493 MEM->init.filter[1] = 0x00000000;
494 MEM->init.rdra = dvma_vtob(MEM->rx_head);
495 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
496 (dvma_vtob(MEM->rx_head) >> 16);
497 MEM->init.tdra = dvma_vtob(MEM->tx_head);
498 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
499 (dvma_vtob(MEM->tx_head) >> 16);
500
501
502 /* tell the lance the address of its init block */
503 REGA(CSR1) = dvma_vtob(&(MEM->init));
504 REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
505
506 #ifdef CONFIG_SUN3X
507 REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
508 #else
509 REGA(CSR3) = CSR3_BSWP;
510 #endif
511
512 }
513
514
515 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
516 {
517 struct lance_private *lp = netdev_priv(dev);
518 int entry, len;
519 struct lance_tx_head *head;
520 unsigned long flags;
521
522 DPRINTK( 1, ( "%s: transmit start.\n",
523 dev->name));
524
525 /* Transmitter timeout, serious problems. */
526 if (netif_queue_stopped(dev)) {
527 int tickssofar = jiffies - dev->trans_start;
528 if (tickssofar < 20)
529 return NETDEV_TX_BUSY;
530
531 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
532 dev->name, DREG ));
533 DREG = CSR0_STOP;
534 /*
535 * Always set BSWP after a STOP as STOP puts it back into
536 * little endian mode.
537 */
538 REGA(CSR3) = CSR3_BSWP;
539 dev->stats.tx_errors++;
540
541 if(lance_debug >= 2) {
542 int i;
543 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
544 lp->old_tx, lp->new_tx,
545 lp->tx_full ? " (full)" : "",
546 lp->new_rx );
547 for( i = 0 ; i < RX_RING_SIZE; i++ )
548 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
549 i, MEM->rx_head[i].base,
550 -MEM->rx_head[i].buf_length,
551 MEM->rx_head[i].msg_length);
552 for( i = 0 ; i < TX_RING_SIZE; i++ )
553 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
554 i, MEM->tx_head[i].base,
555 -MEM->tx_head[i].length,
556 MEM->tx_head[i].misc );
557 }
558
559 lance_init_ring(dev);
560 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
561
562 netif_start_queue(dev);
563 dev->trans_start = jiffies;
564
565 return NETDEV_TX_OK;
566 }
567
568
569 /* Block a timer-based transmit from overlapping. This could better be
570 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
571
572 /* Block a timer-based transmit from overlapping with us by
573 stopping the queue for a bit... */
574
575 netif_stop_queue(dev);
576
577 if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
578 printk( "%s: tx queue lock!.\n", dev->name);
579 /* don't clear dev->tbusy flag. */
580 return NETDEV_TX_BUSY;
581 }
582
583 AREG = CSR0;
584 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
585 dev->name, DREG ));
586
587 #ifdef CONFIG_SUN3X
588 /* this weirdness doesn't appear on sun3... */
589 if(!(DREG & CSR0_INIT)) {
590 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
591 REGA( CSR0 ) = CSR0_STOP;
592 lance_init_ring(dev);
593 REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
594 }
595 #endif
596
597 /* Fill in a Tx ring entry */
598 #if 0
599 if (lance_debug >= 2) {
600 printk( "%s: TX pkt %d type 0x%04x"
601 " from %s to %s"
602 " data at 0x%08x len %d\n",
603 dev->name, lp->new_tx, ((u_short *)skb->data)[6],
604 DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data),
605 (int)skb->data, (int)skb->len );
606 }
607 #endif
608 /* We're not prepared for the int until the last flags are set/reset.
609 * And the int may happen already after setting the OWN_CHIP... */
610 local_irq_save(flags);
611
612 /* Mask to ring buffer boundary. */
613 entry = lp->new_tx;
614 head = &(MEM->tx_head[entry]);
615
616 /* Caution: the write order is important here, set the "ownership" bits
617 * last.
618 */
619
620 /* the sun3's lance needs it's buffer padded to the minimum
621 size */
622 len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
623
624 // head->length = -len;
625 head->length = (-len) | 0xf000;
626 head->misc = 0;
627
628 skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len);
629 if (len != skb->len)
630 memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
631
632 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
633 lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
634 dev->stats.tx_bytes += skb->len;
635
636 /* Trigger an immediate send poll. */
637 REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
638 AREG = CSR0;
639 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
640 dev->name, DREG ));
641 dev->trans_start = jiffies;
642 dev_kfree_skb( skb );
643
644 lp->lock = 0;
645 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
646 TMD1_OWN_HOST)
647 netif_start_queue(dev);
648
649 local_irq_restore(flags);
650
651 return NETDEV_TX_OK;
652 }
653
654 /* The LANCE interrupt handler. */
655
656 static irqreturn_t lance_interrupt( int irq, void *dev_id)
657 {
658 struct net_device *dev = dev_id;
659 struct lance_private *lp = netdev_priv(dev);
660 int csr0;
661 static int in_interrupt;
662
663 if (dev == NULL) {
664 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
665 return IRQ_NONE;
666 }
667
668 if (in_interrupt)
669 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
670 in_interrupt = 1;
671
672 still_more:
673 flush_cache_all();
674
675 AREG = CSR0;
676 csr0 = DREG;
677
678 /* ack interrupts */
679 DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
680
681 /* clear errors */
682 if(csr0 & CSR0_ERR)
683 DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
684
685
686 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
687 dev->name, csr0, DREG ));
688
689 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
690 int old_tx = lp->old_tx;
691
692 // if(lance_debug >= 3) {
693 // int i;
694 //
695 // printk("%s: tx int\n", dev->name);
696 //
697 // for(i = 0; i < TX_RING_SIZE; i++)
698 // printk("ring %d flag=%04x\n", i,
699 // MEM->tx_head[i].flag);
700 // }
701
702 while( old_tx != lp->new_tx) {
703 struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
704
705 DPRINTK(3, ("on tx_ring %d\n", old_tx));
706
707 if (head->flag & TMD1_OWN_CHIP)
708 break; /* It still hasn't been Txed */
709
710 if (head->flag & TMD1_ERR) {
711 int status = head->misc;
712 dev->stats.tx_errors++;
713 if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
714 if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
715 if (status & TMD3_LCOL) dev->stats.tx_window_errors++;
716 if (status & (TMD3_UFLO | TMD3_BUFF)) {
717 dev->stats.tx_fifo_errors++;
718 printk("%s: Tx FIFO error\n",
719 dev->name);
720 REGA(CSR0) = CSR0_STOP;
721 REGA(CSR3) = CSR3_BSWP;
722 lance_init_ring(dev);
723 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
724 return IRQ_HANDLED;
725 }
726 } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
727
728 head->flag &= ~(TMD1_ENP | TMD1_STP);
729 if(head->flag & (TMD1_ONE | TMD1_MORE))
730 dev->stats.collisions++;
731
732 dev->stats.tx_packets++;
733 DPRINTK(3, ("cleared tx ring %d\n", old_tx));
734 }
735 old_tx = (old_tx +1) & TX_RING_MOD_MASK;
736 }
737
738 lp->old_tx = old_tx;
739 }
740
741
742 if (netif_queue_stopped(dev)) {
743 /* The ring is no longer full, clear tbusy. */
744 netif_start_queue(dev);
745 netif_wake_queue(dev);
746 }
747
748 if (csr0 & CSR0_RINT) /* Rx interrupt */
749 lance_rx( dev );
750
751 /* Log misc errors. */
752 if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
753 if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
754 if (csr0 & CSR0_MERR) {
755 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
756 "status %04x.\n", dev->name, csr0 ));
757 /* Restart the chip. */
758 REGA(CSR0) = CSR0_STOP;
759 REGA(CSR3) = CSR3_BSWP;
760 lance_init_ring(dev);
761 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
762 }
763
764
765 /* Clear any other interrupt, and set interrupt enable. */
766 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
767 // CSR0_IDON | CSR0_INEA;
768
769 REGA(CSR0) = CSR0_INEA;
770
771 if(DREG & (CSR0_RINT | CSR0_TINT)) {
772 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
773 goto still_more;
774 }
775
776 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
777 dev->name, DREG ));
778 in_interrupt = 0;
779 return IRQ_HANDLED;
780 }
781
782 /* get packet, toss into skbuff */
783 static int lance_rx( struct net_device *dev )
784 {
785 struct lance_private *lp = netdev_priv(dev);
786 int entry = lp->new_rx;
787
788 /* If we own the next entry, it's a new packet. Send it up. */
789 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
790 struct lance_rx_head *head = &(MEM->rx_head[entry]);
791 int status = head->flag;
792
793 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
794 /* There is a tricky error noted by John Murphy,
795 <murf@perftech.com> to Russ Nelson: Even with
796 full-sized buffers it's possible for a jabber packet to use two
797 buffers, with only the last correctly noting the error. */
798 if (status & RMD1_ENP) /* Only count a general error at the */
799 dev->stats.rx_errors++; /* end of a packet.*/
800 if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
801 if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
802 if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
803 if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
804 head->flag &= (RMD1_ENP|RMD1_STP);
805 } else {
806 /* Malloc up new buffer, compatible with net-3. */
807 // short pkt_len = head->msg_length;// & 0xfff;
808 short pkt_len = (head->msg_length & 0xfff) - 4;
809 struct sk_buff *skb;
810
811 if (pkt_len < 60) {
812 printk( "%s: Runt packet!\n", dev->name );
813 dev->stats.rx_errors++;
814 }
815 else {
816 skb = dev_alloc_skb( pkt_len+2 );
817 if (skb == NULL) {
818 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
819 dev->name ));
820
821 dev->stats.rx_dropped++;
822 head->msg_length = 0;
823 head->flag |= RMD1_OWN_CHIP;
824 lp->new_rx = (lp->new_rx+1) &
825 RX_RING_MOD_MASK;
826 }
827
828 #if 0
829 if (lance_debug >= 3) {
830 u_char *data = PKTBUF_ADDR(head);
831 printk("%s: RX pkt %d type 0x%04x"
832 " from %pM to %pM",
833 dev->name, lp->new_tx, ((u_short *)data)[6],
834 &data[6], data);
835
836 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
837 "len %d at %08x\n",
838 data[15], data[16], data[17], data[18],
839 data[19], data[20], data[21], data[22],
840 pkt_len, data);
841 }
842 #endif
843 if (lance_debug >= 3) {
844 u_char *data = PKTBUF_ADDR(head);
845 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
846 }
847
848
849 skb_reserve( skb, 2 ); /* 16 byte align */
850 skb_put( skb, pkt_len ); /* Make room */
851 skb_copy_to_linear_data(skb,
852 PKTBUF_ADDR(head),
853 pkt_len);
854
855 skb->protocol = eth_type_trans( skb, dev );
856 netif_rx( skb );
857 dev->stats.rx_packets++;
858 dev->stats.rx_bytes += pkt_len;
859 }
860 }
861
862 // head->buf_length = -PKT_BUF_SZ | 0xf000;
863 head->msg_length = 0;
864 head->flag = RMD1_OWN_CHIP;
865
866 entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
867 }
868
869 /* From lance.c (Donald Becker): */
870 /* We should check that at least two ring entries are free.
871 If not, we should free one and mark stats->rx_dropped++. */
872
873 return 0;
874 }
875
876
877 static int lance_close( struct net_device *dev )
878 {
879 struct lance_private *lp = netdev_priv(dev);
880
881 netif_stop_queue(dev);
882
883 AREG = CSR0;
884
885 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
886 dev->name, DREG ));
887
888 /* We stop the LANCE here -- it occasionally polls
889 memory if we don't. */
890 DREG = CSR0_STOP;
891 return 0;
892 }
893
894
895 /* Set or clear the multicast filter for this adaptor.
896 num_addrs == -1 Promiscuous mode, receive all packets
897 num_addrs == 0 Normal mode, clear multicast list
898 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
899 best-effort filtering.
900 */
901
902 /* completely untested on a sun3 */
903 static void set_multicast_list( struct net_device *dev )
904 {
905 struct lance_private *lp = netdev_priv(dev);
906
907 if(netif_queue_stopped(dev))
908 /* Only possible if board is already started */
909 return;
910
911 /* We take the simple way out and always enable promiscuous mode. */
912 DREG = CSR0_STOP; /* Temporarily stop the lance. */
913
914 if (dev->flags & IFF_PROMISC) {
915 /* Log any net taps. */
916 DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name ));
917 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
918 } else {
919 short multicast_table[4];
920 int num_addrs = dev->mc_count;
921 int i;
922 /* We don't use the multicast table, but rely on upper-layer
923 * filtering. */
924 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
925 sizeof(multicast_table) );
926 for( i = 0; i < 4; i++ )
927 REGA( CSR8+i ) = multicast_table[i];
928 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
929 }
930
931 /*
932 * Always set BSWP after a STOP as STOP puts it back into
933 * little endian mode.
934 */
935 REGA( CSR3 ) = CSR3_BSWP;
936
937 /* Resume normal operation and reset AREG to CSR0 */
938 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
939 }
940
941
942 #ifdef MODULE
943
944 static struct net_device *sun3lance_dev;
945
946 int __init init_module(void)
947 {
948 sun3lance_dev = sun3lance_probe(-1);
949 if (IS_ERR(sun3lance_dev))
950 return PTR_ERR(sun3lance_dev);
951 return 0;
952 }
953
954 void __exit cleanup_module(void)
955 {
956 unregister_netdev(sun3lance_dev);
957 #ifdef CONFIG_SUN3
958 iounmap((void __iomem *)sun3lance_dev->base_addr);
959 #endif
960 free_netdev(sun3lance_dev);
961 }
962
963 #endif /* MODULE */
964
linux-next