Merge remote-tracking branch 'pm/linux-next'
[linux-2.6/next.git] / drivers / staging / octeon / ethernet-spi.c
blobd0e2d514968a6f864f5fbda312a854e2a1cc414c
1 /**********************************************************************
2 * Author: Cavium Networks
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
7 * Copyright (c) 2003-2007 Cavium Networks
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 **********************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/netdevice.h>
29 #include <linux/interrupt.h>
30 #include <net/dst.h>
32 #include <asm/octeon/octeon.h>
34 #include "ethernet-defines.h"
35 #include "octeon-ethernet.h"
36 #include "ethernet-util.h"
38 #include "cvmx-spi.h"
40 #include <asm/octeon/cvmx-npi-defs.h>
41 #include "cvmx-spxx-defs.h"
42 #include "cvmx-stxx-defs.h"
44 static int number_spi_ports;
45 static int need_retrain[2] = { 0, 0 };
47 static irqreturn_t cvm_oct_spi_rml_interrupt(int cpl, void *dev_id)
49 irqreturn_t return_status = IRQ_NONE;
50 union cvmx_npi_rsl_int_blocks rsl_int_blocks;
52 /* Check and see if this interrupt was caused by the GMX block */
53 rsl_int_blocks.u64 = cvmx_read_csr(CVMX_NPI_RSL_INT_BLOCKS);
54 if (rsl_int_blocks.s.spx1) { /* 19 - SPX1_INT_REG & STX1_INT_REG */
56 union cvmx_spxx_int_reg spx_int_reg;
57 union cvmx_stxx_int_reg stx_int_reg;
59 spx_int_reg.u64 = cvmx_read_csr(CVMX_SPXX_INT_REG(1));
60 cvmx_write_csr(CVMX_SPXX_INT_REG(1), spx_int_reg.u64);
61 if (!need_retrain[1]) {
63 spx_int_reg.u64 &= cvmx_read_csr(CVMX_SPXX_INT_MSK(1));
64 if (spx_int_reg.s.spf)
65 pr_err("SPI1: SRX Spi4 interface down\n");
66 if (spx_int_reg.s.calerr)
67 pr_err("SPI1: SRX Spi4 Calendar table "
68 "parity error\n");
69 if (spx_int_reg.s.syncerr)
70 pr_err("SPI1: SRX Consecutive Spi4 DIP4 "
71 "errors have exceeded "
72 "SPX_ERR_CTL[ERRCNT]\n");
73 if (spx_int_reg.s.diperr)
74 pr_err("SPI1: SRX Spi4 DIP4 error\n");
75 if (spx_int_reg.s.tpaovr)
76 pr_err("SPI1: SRX Selected port has hit "
77 "TPA overflow\n");
78 if (spx_int_reg.s.rsverr)
79 pr_err("SPI1: SRX Spi4 reserved control "
80 "word detected\n");
81 if (spx_int_reg.s.drwnng)
82 pr_err("SPI1: SRX Spi4 receive FIFO "
83 "drowning/overflow\n");
84 if (spx_int_reg.s.clserr)
85 pr_err("SPI1: SRX Spi4 packet closed on "
86 "non-16B alignment without EOP\n");
87 if (spx_int_reg.s.spiovr)
88 pr_err("SPI1: SRX Spi4 async FIFO overflow\n");
89 if (spx_int_reg.s.abnorm)
90 pr_err("SPI1: SRX Abnormal packet "
91 "termination (ERR bit)\n");
92 if (spx_int_reg.s.prtnxa)
93 pr_err("SPI1: SRX Port out of range\n");
96 stx_int_reg.u64 = cvmx_read_csr(CVMX_STXX_INT_REG(1));
97 cvmx_write_csr(CVMX_STXX_INT_REG(1), stx_int_reg.u64);
98 if (!need_retrain[1]) {
100 stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(1));
101 if (stx_int_reg.s.syncerr)
102 pr_err("SPI1: STX Interface encountered a "
103 "fatal error\n");
104 if (stx_int_reg.s.frmerr)
105 pr_err("SPI1: STX FRMCNT has exceeded "
106 "STX_DIP_CNT[MAXFRM]\n");
107 if (stx_int_reg.s.unxfrm)
108 pr_err("SPI1: STX Unexpected framing "
109 "sequence\n");
110 if (stx_int_reg.s.nosync)
111 pr_err("SPI1: STX ERRCNT has exceeded "
112 "STX_DIP_CNT[MAXDIP]\n");
113 if (stx_int_reg.s.diperr)
114 pr_err("SPI1: STX DIP2 error on the Spi4 "
115 "Status channel\n");
116 if (stx_int_reg.s.datovr)
117 pr_err("SPI1: STX Spi4 FIFO overflow error\n");
118 if (stx_int_reg.s.ovrbst)
119 pr_err("SPI1: STX Transmit packet burst "
120 "too big\n");
121 if (stx_int_reg.s.calpar1)
122 pr_err("SPI1: STX Calendar Table Parity "
123 "Error Bank1\n");
124 if (stx_int_reg.s.calpar0)
125 pr_err("SPI1: STX Calendar Table Parity "
126 "Error Bank0\n");
129 cvmx_write_csr(CVMX_SPXX_INT_MSK(1), 0);
130 cvmx_write_csr(CVMX_STXX_INT_MSK(1), 0);
131 need_retrain[1] = 1;
132 return_status = IRQ_HANDLED;
135 if (rsl_int_blocks.s.spx0) { /* 18 - SPX0_INT_REG & STX0_INT_REG */
136 union cvmx_spxx_int_reg spx_int_reg;
137 union cvmx_stxx_int_reg stx_int_reg;
139 spx_int_reg.u64 = cvmx_read_csr(CVMX_SPXX_INT_REG(0));
140 cvmx_write_csr(CVMX_SPXX_INT_REG(0), spx_int_reg.u64);
141 if (!need_retrain[0]) {
143 spx_int_reg.u64 &= cvmx_read_csr(CVMX_SPXX_INT_MSK(0));
144 if (spx_int_reg.s.spf)
145 pr_err("SPI0: SRX Spi4 interface down\n");
146 if (spx_int_reg.s.calerr)
147 pr_err("SPI0: SRX Spi4 Calendar table "
148 "parity error\n");
149 if (spx_int_reg.s.syncerr)
150 pr_err("SPI0: SRX Consecutive Spi4 DIP4 "
151 "errors have exceeded "
152 "SPX_ERR_CTL[ERRCNT]\n");
153 if (spx_int_reg.s.diperr)
154 pr_err("SPI0: SRX Spi4 DIP4 error\n");
155 if (spx_int_reg.s.tpaovr)
156 pr_err("SPI0: SRX Selected port has hit "
157 "TPA overflow\n");
158 if (spx_int_reg.s.rsverr)
159 pr_err("SPI0: SRX Spi4 reserved control "
160 "word detected\n");
161 if (spx_int_reg.s.drwnng)
162 pr_err("SPI0: SRX Spi4 receive FIFO "
163 "drowning/overflow\n");
164 if (spx_int_reg.s.clserr)
165 pr_err("SPI0: SRX Spi4 packet closed on "
166 "non-16B alignment without EOP\n");
167 if (spx_int_reg.s.spiovr)
168 pr_err("SPI0: SRX Spi4 async FIFO overflow\n");
169 if (spx_int_reg.s.abnorm)
170 pr_err("SPI0: SRX Abnormal packet "
171 "termination (ERR bit)\n");
172 if (spx_int_reg.s.prtnxa)
173 pr_err("SPI0: SRX Port out of range\n");
176 stx_int_reg.u64 = cvmx_read_csr(CVMX_STXX_INT_REG(0));
177 cvmx_write_csr(CVMX_STXX_INT_REG(0), stx_int_reg.u64);
178 if (!need_retrain[0]) {
180 stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(0));
181 if (stx_int_reg.s.syncerr)
182 pr_err("SPI0: STX Interface encountered a "
183 "fatal error\n");
184 if (stx_int_reg.s.frmerr)
185 pr_err("SPI0: STX FRMCNT has exceeded "
186 "STX_DIP_CNT[MAXFRM]\n");
187 if (stx_int_reg.s.unxfrm)
188 pr_err("SPI0: STX Unexpected framing "
189 "sequence\n");
190 if (stx_int_reg.s.nosync)
191 pr_err("SPI0: STX ERRCNT has exceeded "
192 "STX_DIP_CNT[MAXDIP]\n");
193 if (stx_int_reg.s.diperr)
194 pr_err("SPI0: STX DIP2 error on the Spi4 "
195 "Status channel\n");
196 if (stx_int_reg.s.datovr)
197 pr_err("SPI0: STX Spi4 FIFO overflow error\n");
198 if (stx_int_reg.s.ovrbst)
199 pr_err("SPI0: STX Transmit packet burst "
200 "too big\n");
201 if (stx_int_reg.s.calpar1)
202 pr_err("SPI0: STX Calendar Table Parity "
203 "Error Bank1\n");
204 if (stx_int_reg.s.calpar0)
205 pr_err("SPI0: STX Calendar Table Parity "
206 "Error Bank0\n");
209 cvmx_write_csr(CVMX_SPXX_INT_MSK(0), 0);
210 cvmx_write_csr(CVMX_STXX_INT_MSK(0), 0);
211 need_retrain[0] = 1;
212 return_status = IRQ_HANDLED;
215 return return_status;
218 static void cvm_oct_spi_enable_error_reporting(int interface)
220 union cvmx_spxx_int_msk spxx_int_msk;
221 union cvmx_stxx_int_msk stxx_int_msk;
223 spxx_int_msk.u64 = cvmx_read_csr(CVMX_SPXX_INT_MSK(interface));
224 spxx_int_msk.s.calerr = 1;
225 spxx_int_msk.s.syncerr = 1;
226 spxx_int_msk.s.diperr = 1;
227 spxx_int_msk.s.tpaovr = 1;
228 spxx_int_msk.s.rsverr = 1;
229 spxx_int_msk.s.drwnng = 1;
230 spxx_int_msk.s.clserr = 1;
231 spxx_int_msk.s.spiovr = 1;
232 spxx_int_msk.s.abnorm = 1;
233 spxx_int_msk.s.prtnxa = 1;
234 cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), spxx_int_msk.u64);
236 stxx_int_msk.u64 = cvmx_read_csr(CVMX_STXX_INT_MSK(interface));
237 stxx_int_msk.s.frmerr = 1;
238 stxx_int_msk.s.unxfrm = 1;
239 stxx_int_msk.s.nosync = 1;
240 stxx_int_msk.s.diperr = 1;
241 stxx_int_msk.s.datovr = 1;
242 stxx_int_msk.s.ovrbst = 1;
243 stxx_int_msk.s.calpar1 = 1;
244 stxx_int_msk.s.calpar0 = 1;
245 cvmx_write_csr(CVMX_STXX_INT_MSK(interface), stxx_int_msk.u64);
248 static void cvm_oct_spi_poll(struct net_device *dev)
250 static int spi4000_port;
251 struct octeon_ethernet *priv = netdev_priv(dev);
252 int interface;
254 for (interface = 0; interface < 2; interface++) {
256 if ((priv->port == interface * 16) && need_retrain[interface]) {
258 if (cvmx_spi_restart_interface
259 (interface, CVMX_SPI_MODE_DUPLEX, 10) == 0) {
260 need_retrain[interface] = 0;
261 cvm_oct_spi_enable_error_reporting(interface);
266 * The SPI4000 TWSI interface is very slow. In order
267 * not to bring the system to a crawl, we only poll a
268 * single port every second. This means negotiation
269 * speed changes take up to 10 seconds, but at least
270 * we don't waste absurd amounts of time waiting for
271 * TWSI.
273 if (priv->port == spi4000_port) {
275 * This function does nothing if it is called on an
276 * interface without a SPI4000.
278 cvmx_spi4000_check_speed(interface, priv->port);
280 * Normal ordering increments. By decrementing
281 * we only match once per iteration.
283 spi4000_port--;
284 if (spi4000_port < 0)
285 spi4000_port = 10;
290 int cvm_oct_spi_init(struct net_device *dev)
292 int r;
293 struct octeon_ethernet *priv = netdev_priv(dev);
295 if (number_spi_ports == 0) {
296 r = request_irq(OCTEON_IRQ_RML, cvm_oct_spi_rml_interrupt,
297 IRQF_SHARED, "SPI", &number_spi_ports);
298 if (r)
299 return r;
301 number_spi_ports++;
303 if ((priv->port == 0) || (priv->port == 16)) {
304 cvm_oct_spi_enable_error_reporting(INTERFACE(priv->port));
305 priv->poll = cvm_oct_spi_poll;
307 cvm_oct_common_init(dev);
308 return 0;
311 void cvm_oct_spi_uninit(struct net_device *dev)
313 int interface;
315 cvm_oct_common_uninit(dev);
316 number_spi_ports--;
317 if (number_spi_ports == 0) {
318 for (interface = 0; interface < 2; interface++) {
319 cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0);
320 cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0);
322 free_irq(OCTEON_IRQ_RML, &number_spi_ports);