Merge remote-tracking branch 'pm/linux-next'

[linux-2.6/next.git] / drivers / staging / solo6x10 / registers.h

/*
 * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
 * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

#ifndef __SOLO6X10_REGISTERS_H
#define __SOLO6X10_REGISTERS_H

#include "offsets.h"

/* Global 6X10 system configuration */
#define SOLO_SYS_CFG                            0x0000
#define   SOLO6010_SYS_CFG_FOUT_EN              0x00000001 /* 6010 only */
#define   SOLO6010_SYS_CFG_PLL_BYPASS           0x00000002 /* 6010 only */
#define   SOLO6010_SYS_CFG_PLL_PWDN             0x00000004 /* 6010 only */
#define   SOLO6010_SYS_CFG_OUTDIV(__n)          (((__n) & 0x003) << 3) /* 6010 only */
#define   SOLO6010_SYS_CFG_FEEDBACKDIV(__n)     (((__n) & 0x1ff) << 5) /* 6010 only */
#define   SOLO6010_SYS_CFG_INPUTDIV(__n)        (((__n) & 0x01f) << 14) /* 6010 only */
#define   SOLO_SYS_CFG_CLOCK_DIV                0x00080000
#define   SOLO_SYS_CFG_NCLK_DELAY(__n)          (((__n) & 0x003) << 24)
#define   SOLO_SYS_CFG_PCLK_DELAY(__n)          (((__n) & 0x00f) << 26)
#define   SOLO_SYS_CFG_SDRAM64BIT               0x40000000 /* 6110: must be set */
#define   SOLO_SYS_CFG_RESET                    0x80000000

#define SOLO_DMA_CTRL                           0x0004
#define   SOLO_DMA_CTRL_REFRESH_CYCLE(n)        ((n)<<8)
/* 0=16/32MB, 1=32/64MB, 2=64/128MB, 3=128/256MB */
#define   SOLO_DMA_CTRL_SDRAM_SIZE(n)           ((n)<<6)
#define   SOLO_DMA_CTRL_SDRAM_CLK_INVERT        (1<<5)
#define   SOLO_DMA_CTRL_STROBE_SELECT           (1<<4)
#define   SOLO_DMA_CTRL_READ_DATA_SELECT        (1<<3)
#define   SOLO_DMA_CTRL_READ_CLK_SELECT         (1<<2)
#define   SOLO_DMA_CTRL_LATENCY(n)              ((n)<<0)
#define SOLO_DMA_CTRL1                          0x0008

#define SOLO_SYS_VCLK                           0x000C
#define   SOLO_VCLK_INVERT                      (1<<22)
/* 0=sys_clk/4, 1=sys_clk/2, 2=clk_in/2 of system input */
#define   SOLO_VCLK_SELECT(n)                   ((n)<<20)
#define   SOLO_VCLK_VIN1415_DELAY(n)            ((n)<<14)
#define   SOLO_VCLK_VIN1213_DELAY(n)            ((n)<<12)
#define   SOLO_VCLK_VIN1011_DELAY(n)            ((n)<<10)
#define   SOLO_VCLK_VIN0809_DELAY(n)            ((n)<<8)
#define   SOLO_VCLK_VIN0607_DELAY(n)            ((n)<<6)
#define   SOLO_VCLK_VIN0405_DELAY(n)            ((n)<<4)
#define   SOLO_VCLK_VIN0203_DELAY(n)            ((n)<<2)
#define   SOLO_VCLK_VIN0001_DELAY(n)            ((n)<<0)

#define SOLO_IRQ_STAT                           0x0010
#define SOLO_IRQ_ENABLE                         0x0014
#define   SOLO_IRQ_P2M(n)                       (1<<((n)+17))
#define   SOLO_IRQ_GPIO                         (1<<16)
#define   SOLO_IRQ_VIDEO_LOSS                   (1<<15)
#define   SOLO_IRQ_VIDEO_IN                     (1<<14)
#define   SOLO_IRQ_MOTION                       (1<<13)
#define   SOLO_IRQ_ATA_CMD                      (1<<12)
#define   SOLO_IRQ_ATA_DIR                      (1<<11)
#define   SOLO_IRQ_PCI_ERR                      (1<<10)
#define   SOLO_IRQ_PS2_1                        (1<<9)
#define   SOLO_IRQ_PS2_0                        (1<<8)
#define   SOLO_IRQ_SPI                          (1<<7)
#define   SOLO_IRQ_IIC                          (1<<6)
#define   SOLO_IRQ_UART(n)                      (1<<((n) + 4))
#define   SOLO_IRQ_G723                         (1<<3)
#define   SOLO_IRQ_DECODER                      (1<<1)
#define   SOLO_IRQ_ENCODER                      (1<<0)

#define SOLO_CHIP_OPTION                        0x001C
#define   SOLO_CHIP_ID_MASK                     0x00000007

#define SOLO6110_PLL_CONFIG                     0x0020
#define   SOLO6110_PLL_RANGE_BYPASS             (0 << 20)
#define   SOLO6110_PLL_RANGE_5_10MHZ            (1 << 20)
#define   SOLO6110_PLL_RANGE_8_16MHZ            (2 << 20)
#define   SOLO6110_PLL_RANGE_13_26MHZ           (3 << 20)
#define   SOLO6110_PLL_RANGE_21_42MHZ           (4 << 20)
#define   SOLO6110_PLL_RANGE_34_68MHZ           (5 << 20)
#define   SOLO6110_PLL_RANGE_54_108MHZ          (6 << 20)
#define   SOLO6110_PLL_RANGE_88_200MHZ          (7 << 20)
#define   SOLO6110_PLL_DIVR(x)                  (((x) - 1) << 15)
#define   SOLO6110_PLL_DIVQ_EXP(x)              ((x) << 12)
#define   SOLO6110_PLL_DIVF(x)                  (((x) - 1) << 4)
#define   SOLO6110_PLL_RESET                    (1 << 3)
#define   SOLO6110_PLL_BYPASS                   (1 << 2)
#define   SOLO6110_PLL_FSEN                     (1 << 1)
#define   SOLO6110_PLL_FB                       (1 << 0)

#define SOLO_EEPROM_CTRL                        0x0060
#define   SOLO_EEPROM_ACCESS_EN                 (1<<7)
#define   SOLO_EEPROM_CS                        (1<<3)
#define   SOLO_EEPROM_CLK                       (1<<2)
#define   SOLO_EEPROM_DO                        (1<<1)
#define   SOLO_EEPROM_DI                        (1<<0)
#define   SOLO_EEPROM_ENABLE                    (EEPROM_ACCESS_EN | EEPROM_CS)

#define SOLO_PCI_ERR                            0x0070
#define   SOLO_PCI_ERR_FATAL                    0x00000001
#define   SOLO_PCI_ERR_PARITY                   0x00000002
#define   SOLO_PCI_ERR_TARGET                   0x00000004
#define   SOLO_PCI_ERR_TIMEOUT                  0x00000008
#define   SOLO_PCI_ERR_P2M                      0x00000010
#define   SOLO_PCI_ERR_ATA                      0x00000020
#define   SOLO_PCI_ERR_P2M_DESC                 0x00000040
#define   SOLO_PCI_ERR_FSM0(__s)                (((__s) >> 16) & 0x0f)
#define   SOLO_PCI_ERR_FSM1(__s)                (((__s) >> 20) & 0x0f)
#define   SOLO_PCI_ERR_FSM2(__s)                (((__s) >> 24) & 0x1f)

#define SOLO_P2M_BASE                           0x0080

#define SOLO_P2M_CONFIG(n)                      (0x0080 + ((n)*0x20))
#define   SOLO_P2M_DMA_INTERVAL(n)              ((n)<<6)/* N*32 clocks */
#define   SOLO_P2M_CSC_BYTE_REORDER             (1<<5)  /* BGR -> RGB */
/* 0:r=[14:10] g=[9:5] b=[4:0], 1:r=[15:11] g=[10:5] b=[4:0] */
#define   SOLO_P2M_CSC_16BIT_565                (1<<4)
#define   SOLO_P2M_UV_SWAP                      (1<<3)
#define   SOLO_P2M_PCI_MASTER_MODE              (1<<2)
#define   SOLO_P2M_DESC_INTR_OPT                (1<<1)  /* 1:Empty, 0:Each */
#define   SOLO_P2M_DESC_MODE                    (1<<0)

#define SOLO_P2M_DES_ADR(n)                     (0x0084 + ((n)*0x20))

#define SOLO_P2M_DESC_ID(n)                     (0x0088 + ((n)*0x20))
#define   SOLO_P2M_UPDATE_ID(n)                 ((n)<<0)

#define SOLO_P2M_STATUS(n)                      (0x008C + ((n)*0x20))
#define   SOLO_P2M_COMMAND_DONE                 (1<<8)
#define   SOLO_P2M_CURRENT_ID(stat)             (0xff & (stat))

#define SOLO_P2M_CONTROL(n)                     (0x0090 + ((n)*0x20))
#define   SOLO_P2M_PCI_INC(n)                   ((n)<<20)
#define   SOLO_P2M_REPEAT(n)                    ((n)<<10)
/* 0:512, 1:256, 2:128, 3:64, 4:32, 5:128(2page) */
#define   SOLO_P2M_BURST_SIZE(n)                ((n)<<7)
#define     SOLO_P2M_BURST_512                  0
#define     SOLO_P2M_BURST_256                  1
#define     SOLO_P2M_BURST_128                  2
#define     SOLO_P2M_BURST_64                   3
#define     SOLO_P2M_BURST_32                   4
#define   SOLO_P2M_CSC_16BIT                    (1<<6)  /* 0:24bit, 1:16bit */
/* 0:Y[0]<-0(OFF), 1:Y[0]<-1(ON), 2:Y[0]<-G[0], 3:Y[0]<-Bit[15] */
#define   SOLO_P2M_ALPHA_MODE(n)                ((n)<<4)
#define   SOLO_P2M_CSC_ON                       (1<<3)
#define   SOLO_P2M_INTERRUPT_REQ                (1<<2)
#define   SOLO_P2M_WRITE                        (1<<1)
#define   SOLO_P2M_TRANS_ON                     (1<<0)

#define SOLO_P2M_EXT_CFG(n)                     (0x0094 + ((n)*0x20))
#define   SOLO_P2M_EXT_INC(n)                   ((n)<<20)
#define   SOLO_P2M_COPY_SIZE(n)                 ((n)<<0)

#define SOLO_P2M_TAR_ADR(n)                     (0x0098 + ((n)*0x20))

#define SOLO_P2M_EXT_ADR(n)                     (0x009C + ((n)*0x20))

#define SOLO_P2M_BUFFER(i)                      (0x2000 + ((i)*4))

#define SOLO_VI_CH_SWITCH_0                     0x0100
#define SOLO_VI_CH_SWITCH_1                     0x0104
#define SOLO_VI_CH_SWITCH_2                     0x0108

#define SOLO_VI_CH_ENA                          0x010C
#define SOLO_VI_CH_FORMAT                       0x0110
#define   SOLO_VI_FD_SEL_MASK(n)                ((n)<<16)
#define   SOLO_VI_PROG_MASK(n)                  ((n)<<0)

#define SOLO_VI_FMT_CFG                         0x0114
#define   SOLO_VI_FMT_CHECK_VCOUNT              (1<<31)
#define   SOLO_VI_FMT_CHECK_HCOUNT              (1<<30)
#define   SOLO_VI_FMT_TEST_SIGNAL               (1<<28)

#define SOLO_VI_PAGE_SW                         0x0118
#define   SOLO_FI_INV_DISP_LIVE(n)              ((n)<<8)
#define   SOLO_FI_INV_DISP_OUT(n)               ((n)<<7)
#define   SOLO_DISP_SYNC_FI(n)                  ((n)<<6)
#define   SOLO_PIP_PAGE_ADD(n)                  ((n)<<3)
#define   SOLO_NORMAL_PAGE_ADD(n)               ((n)<<0)

#define SOLO_VI_ACT_I_P                         0x011C
#define SOLO_VI_ACT_I_S                         0x0120
#define SOLO_VI_ACT_P                           0x0124
#define   SOLO_VI_FI_INVERT                     (1<<31)
#define   SOLO_VI_H_START(n)                    ((n)<<21)
#define   SOLO_VI_V_START(n)                    ((n)<<11)
#define   SOLO_VI_V_STOP(n)                     ((n)<<0)

#define SOLO_VI_STATUS0                         0x0128
#define   SOLO_VI_STATUS0_PAGE(__n)             ((__n) & 0x07)
#define SOLO_VI_STATUS1                         0x012C

/* XXX: Might be better off in kernel level disp.h */
#define DISP_PAGE(stat)                         ((stat) & 0x07)

#define SOLO_VI_PB_CONFIG                       0x0130
#define   SOLO_VI_PB_USER_MODE                  (1<<1)
#define   SOLO_VI_PB_PAL                        (1<<0)
#define SOLO_VI_PB_RANGE_HV                     0x0134
#define   SOLO_VI_PB_HSIZE(h)                   ((h)<<12)
#define   SOLO_VI_PB_VSIZE(v)                   ((v)<<0)
#define SOLO_VI_PB_ACT_H                        0x0138
#define   SOLO_VI_PB_HSTART(n)                  ((n)<<12)
#define   SOLO_VI_PB_HSTOP(n)                   ((n)<<0)
#define SOLO_VI_PB_ACT_V                        0x013C
#define   SOLO_VI_PB_VSTART(n)                  ((n)<<12)
#define   SOLO_VI_PB_VSTOP(n)                   ((n)<<0)

#define SOLO_VI_MOSAIC(ch)                      (0x0140 + ((ch)*4))
#define   SOLO_VI_MOSAIC_SX(x)                  ((x)<<24)
#define   SOLO_VI_MOSAIC_EX(x)                  ((x)<<16)
#define   SOLO_VI_MOSAIC_SY(x)                  ((x)<<8)
#define   SOLO_VI_MOSAIC_EY(x)                  ((x)<<0)

#define SOLO_VI_WIN_CTRL0(ch)                   (0x0180 + ((ch)*4))
#define SOLO_VI_WIN_CTRL1(ch)                   (0x01C0 + ((ch)*4))

#define   SOLO_VI_WIN_CHANNEL(n)                ((n)<<28)

#define   SOLO_VI_WIN_PIP(n)                    ((n)<<27)
#define   SOLO_VI_WIN_SCALE(n)                  ((n)<<24)

#define   SOLO_VI_WIN_SX(x)                     ((x)<<12)
#define   SOLO_VI_WIN_EX(x)                     ((x)<<0)

#define   SOLO_VI_WIN_SY(x)                     ((x)<<12)
#define   SOLO_VI_WIN_EY(x)                     ((x)<<0)

#define SOLO_VI_WIN_ON(ch)                      (0x0200 + ((ch)*4))

#define SOLO_VI_WIN_SW                          0x0240
#define SOLO_VI_WIN_LIVE_AUTO_MUTE              0x0244

#define SOLO_VI_MOT_ADR                         0x0260
#define   SOLO_VI_MOTION_EN(mask)               ((mask)<<16)
#define SOLO_VI_MOT_CTRL                        0x0264
#define   SOLO_VI_MOTION_FRAME_COUNT(n)         ((n)<<24)
#define   SOLO_VI_MOTION_SAMPLE_LENGTH(n)       ((n)<<16)
#define   SOLO_VI_MOTION_INTR_START_STOP        (1<<15)
#define   SOLO_VI_MOTION_FREEZE_DATA            (1<<14)
#define   SOLO_VI_MOTION_SAMPLE_COUNT(n)        ((n)<<0)
#define SOLO_VI_MOT_CLEAR                       0x0268
#define SOLO_VI_MOT_STATUS                      0x026C
#define   SOLO_VI_MOTION_CNT(n)                 ((n)<<0)
#define SOLO_VI_MOTION_BORDER                   0x0270
#define SOLO_VI_MOTION_BAR                      0x0274
#define   SOLO_VI_MOTION_Y_SET                  (1<<29)
#define   SOLO_VI_MOTION_Y_ADD                  (1<<28)
#define   SOLO_VI_MOTION_CB_SET                 (1<<27)
#define   SOLO_VI_MOTION_CB_ADD                 (1<<26)
#define   SOLO_VI_MOTION_CR_SET                 (1<<25)
#define   SOLO_VI_MOTION_CR_ADD                 (1<<24)
#define   SOLO_VI_MOTION_Y_VALUE(v)             ((v)<<16)
#define   SOLO_VI_MOTION_CB_VALUE(v)            ((v)<<8)
#define   SOLO_VI_MOTION_CR_VALUE(v)            ((v)<<0)

#define SOLO_VO_FMT_ENC                         0x0300
#define   SOLO_VO_SCAN_MODE_PROGRESSIVE         (1<<31)
#define   SOLO_VO_FMT_TYPE_PAL                  (1<<30)
#define   SOLO_VO_FMT_TYPE_NTSC                 0
#define   SOLO_VO_USER_SET                      (1<<29)

#define   SOLO_VO_FI_CHANGE                     (1<<20)
#define   SOLO_VO_USER_COLOR_SET_VSYNC          (1<<19)
#define   SOLO_VO_USER_COLOR_SET_HSYNC          (1<<18)
#define   SOLO_VO_USER_COLOR_SET_NAV            (1<<17)
#define   SOLO_VO_USER_COLOR_SET_NAH            (1<<16)
#define   SOLO_VO_NA_COLOR_Y(Y)                 ((Y)<<8)
#define   SOLO_VO_NA_COLOR_CB(CB)               (((CB)/16)<<4)
#define   SOLO_VO_NA_COLOR_CR(CR)               (((CR)/16)<<0)

#define SOLO_VO_ACT_H                           0x0304
#define   SOLO_VO_H_BLANK(n)                    ((n)<<22)
#define   SOLO_VO_H_START(n)                    ((n)<<11)
#define   SOLO_VO_H_STOP(n)                     ((n)<<0)

#define SOLO_VO_ACT_V                           0x0308
#define   SOLO_VO_V_BLANK(n)                    ((n)<<22)
#define   SOLO_VO_V_START(n)                    ((n)<<11)
#define   SOLO_VO_V_STOP(n)                     ((n)<<0)

#define SOLO_VO_RANGE_HV                        0x030C
#define   SOLO_VO_SYNC_INVERT                   (1<<24)
#define   SOLO_VO_HSYNC_INVERT                  (1<<23)
#define   SOLO_VO_VSYNC_INVERT                  (1<<22)
#define   SOLO_VO_H_LEN(n)                      ((n)<<11)
#define   SOLO_VO_V_LEN(n)                      ((n)<<0)

#define SOLO_VO_DISP_CTRL                       0x0310
#define   SOLO_VO_DISP_ON                       (1<<31)
#define   SOLO_VO_DISP_ERASE_COUNT(n)           ((n&0xf)<<24)
#define   SOLO_VO_DISP_DOUBLE_SCAN              (1<<22)
#define   SOLO_VO_DISP_SINGLE_PAGE              (1<<21)
#define   SOLO_VO_DISP_BASE(n)                  (((n)>>16) & 0xffff)

#define SOLO_VO_DISP_ERASE                      0x0314
#define   SOLO_VO_DISP_ERASE_ON                 (1<<0)

#define SOLO_VO_ZOOM_CTRL                       0x0318
#define   SOLO_VO_ZOOM_VER_ON                   (1<<24)
#define   SOLO_VO_ZOOM_HOR_ON                   (1<<23)
#define   SOLO_VO_ZOOM_V_COMP                   (1<<22)
#define   SOLO_VO_ZOOM_SX(h)                    (((h)/2)<<11)
#define   SOLO_VO_ZOOM_SY(v)                    (((v)/2)<<0)

#define SOLO_VO_FREEZE_CTRL                     0x031C
#define   SOLO_VO_FREEZE_ON                     (1<<1)
#define   SOLO_VO_FREEZE_INTERPOLATION          (1<<0)

#define SOLO_VO_BKG_COLOR                       0x0320
#define   SOLO_BG_Y(y)                          ((y)<<16)
#define   SOLO_BG_U(u)                          ((u)<<8)
#define   SOLO_BG_V(v)                          ((v)<<0)

#define SOLO_VO_DEINTERLACE                     0x0324
#define   SOLO_VO_DEINTERLACE_THRESHOLD(n)      ((n)<<8)
#define   SOLO_VO_DEINTERLACE_EDGE_VALUE(n)     ((n)<<0)

#define SOLO_VO_BORDER_LINE_COLOR               0x0330
#define SOLO_VO_BORDER_FILL_COLOR               0x0334
#define SOLO_VO_BORDER_LINE_MASK                0x0338
#define SOLO_VO_BORDER_FILL_MASK                0x033c

#define SOLO_VO_BORDER_X(n)                     (0x0340+((n)*4))
#define SOLO_VO_BORDER_Y(n)                     (0x0354+((n)*4))

#define SOLO_VO_CELL_EXT_SET                    0x0368
#define SOLO_VO_CELL_EXT_START                  0x036c
#define SOLO_VO_CELL_EXT_STOP                   0x0370

#define SOLO_VO_CELL_EXT_SET2                   0x0374
#define SOLO_VO_CELL_EXT_START2                 0x0378
#define SOLO_VO_CELL_EXT_STOP2                  0x037c

#define SOLO_VO_RECTANGLE_CTRL(n)               (0x0368+((n)*12))
#define SOLO_VO_RECTANGLE_START(n)              (0x036c+((n)*12))
#define SOLO_VO_RECTANGLE_STOP(n)               (0x0370+((n)*12))

#define SOLO_VO_CURSOR_POS                      (0x0380)
#define SOLO_VO_CURSOR_CLR                      (0x0384)
#define SOLO_VO_CURSOR_CLR2                     (0x0388)
#define SOLO_VO_CURSOR_MASK(id)                 (0x0390+((id)*4))

#define SOLO_VO_EXPANSION(id)                   (0x0250+((id)*4))

#define SOLO_OSG_CONFIG                         0x03E0
#define   SOLO_VO_OSG_ON                        (1<<31)
#define   SOLO_VO_OSG_COLOR_MUTE                (1<<28)
#define   SOLO_VO_OSG_ALPHA_RATE(n)             ((n)<<22)
#define   SOLO_VO_OSG_ALPHA_BG_RATE(n)          ((n)<<16)
#define   SOLO_VO_OSG_BASE(offset)              (((offset)>>16)&0xffff)

#define SOLO_OSG_ERASE                          0x03E4
#define   SOLO_OSG_ERASE_ON                     (0x80)
#define   SOLO_OSG_ERASE_OFF                    (0x00)

#define SOLO_VO_OSG_BLINK                       0x03E8
#define   SOLO_VO_OSG_BLINK_ON                  (1<<1)
#define   SOLO_VO_OSG_BLINK_INTREVAL18          (1<<0)

#define SOLO_CAP_BASE                           0x0400
#define   SOLO_CAP_MAX_PAGE(n)                  ((n)<<16)
#define   SOLO_CAP_BASE_ADDR(n)                 ((n)<<0)
#define SOLO_CAP_BTW                            0x0404
#define   SOLO_CAP_PROG_BANDWIDTH(n)            ((n)<<8)
#define   SOLO_CAP_MAX_BANDWIDTH(n)             ((n)<<0)

#define SOLO_DIM_SCALE1                         0x0408
#define SOLO_DIM_SCALE2                         0x040C
#define SOLO_DIM_SCALE3                         0x0410
#define SOLO_DIM_SCALE4                         0x0414
#define SOLO_DIM_SCALE5                         0x0418
#define   SOLO_DIM_V_MB_NUM_FRAME(n)            ((n)<<16)
#define   SOLO_DIM_V_MB_NUM_FIELD(n)            ((n)<<8)
#define   SOLO_DIM_H_MB_NUM(n)                  ((n)<<0)

#define SOLO_DIM_PROG                           0x041C
#define SOLO_CAP_STATUS                         0x0420

#define SOLO_CAP_CH_SCALE(ch)                   (0x0440+((ch)*4))
#define SOLO_CAP_CH_COMP_ENA_E(ch)              (0x0480+((ch)*4))
#define SOLO_CAP_CH_INTV(ch)                    (0x04C0+((ch)*4))
#define SOLO_CAP_CH_INTV_E(ch)                  (0x0500+((ch)*4))


#define SOLO_VE_CFG0                            0x0610
#define   SOLO_VE_TWO_PAGE_MODE                 (1<<31)
#define   SOLO_VE_INTR_CTRL(n)                  ((n)<<24)
#define   SOLO_VE_BLOCK_SIZE(n)                 ((n)<<16)
#define   SOLO_VE_BLOCK_BASE(n)                 ((n)<<0)

#define SOLO_VE_CFG1                            0x0614
#define   SOLO6110_VE_MPEG_SIZE_H(n)            ((n)<<28) /* 6110 only */
#define   SOLO6010_VE_BYTE_ALIGN(n)             ((n)<<24) /* 6010 only */
#define   SOLO6110_VE_JPEG_SIZE_H(n)            ((n)<<20) /* 6110 only */
#define   SOLO_VE_INSERT_INDEX                  (1<<18)
#define   SOLO_VE_MOTION_MODE(n)                ((n)<<16)
#define   SOLO_VE_MOTION_BASE(n)                ((n)<<0)

#define SOLO_VE_WMRK_POLY                       0x061C
#define SOLO_VE_VMRK_INIT_KEY                   0x0620
#define SOLO_VE_WMRK_STRL                       0x0624
#define SOLO_VE_ENCRYP_POLY                     0x0628
#define SOLO_VE_ENCRYP_INIT                     0x062C
#define SOLO_VE_ATTR                            0x0630
#define   SOLO_VE_LITTLE_ENDIAN                 (1<<31)
#define   SOLO_COMP_ATTR_RN                     (1<<30)
#define   SOLO_COMP_ATTR_FCODE(n)               ((n)<<27)
#define   SOLO_COMP_TIME_INC(n)                 ((n)<<25)
#define   SOLO_COMP_TIME_WIDTH(n)               ((n)<<21)
#define   SOLO_DCT_INTERVAL(n)                  ((n)<<16)

#define SOLO_VE_STATE(n)                        (0x0640+((n)*4))

#define SOLO_VE_JPEG_QP_TBL                     0x0670
#define SOLO_VE_JPEG_QP_CH_L                    0x0674
#define SOLO_VE_JPEG_QP_CH_H                    0x0678
#define SOLO_VE_JPEG_CFG                        0x067C
#define SOLO_VE_JPEG_CTRL                       0x0680

#define SOLO_VE_OSD_CH                          0x0690
#define SOLO_VE_OSD_BASE                        0x0694
#define SOLO_VE_OSD_CLR                         0x0698
#define SOLO_VE_OSD_OPT                         0x069C

#define SOLO_VE_CH_INTL(ch)                     (0x0700+((ch)*4))
#define SOLO6010_VE_CH_MOT(ch)                  (0x0740+((ch)*4)) /* 6010 only */
#define SOLO_VE_CH_QP(ch)                       (0x0780+((ch)*4))
#define SOLO_VE_CH_QP_E(ch)                     (0x07C0+((ch)*4))
#define SOLO_VE_CH_GOP(ch)                      (0x0800+((ch)*4))
#define SOLO_VE_CH_GOP_E(ch)                    (0x0840+((ch)*4))
#define SOLO_VE_CH_REF_BASE(ch)                 (0x0880+((ch)*4))
#define SOLO_VE_CH_REF_BASE_E(ch)               (0x08C0+((ch)*4))

#define SOLO_VE_MPEG4_QUE(n)                    (0x0A00+((n)*8))
#define SOLO_VE_JPEG_QUE(n)                     (0x0A04+((n)*8))

#define SOLO_VD_CFG0                            0x0900
#define   SOLO6010_VD_CFG_NO_WRITE_NO_WINDOW    (1<<24) /* 6010 only */
#define   SOLO_VD_CFG_BUSY_WIAT_CODE            (1<<23)
#define   SOLO_VD_CFG_BUSY_WIAT_REF             (1<<22)
#define   SOLO_VD_CFG_BUSY_WIAT_RES             (1<<21)
#define   SOLO_VD_CFG_BUSY_WIAT_MS              (1<<20)
#define   SOLO_VD_CFG_SINGLE_MODE               (1<<18)
#define   SOLO_VD_CFG_SCAL_MANUAL               (1<<17)
#define   SOLO_VD_CFG_USER_PAGE_CTRL            (1<<16)
#define   SOLO_VD_CFG_LITTLE_ENDIAN             (1<<15)
#define   SOLO_VD_CFG_START_FI                  (1<<14)
#define   SOLO_VD_CFG_ERR_LOCK                  (1<<13)
#define   SOLO_VD_CFG_ERR_INT_ENA               (1<<12)
#define   SOLO_VD_CFG_TIME_WIDTH(n)             ((n)<<8)
#define   SOLO_VD_CFG_DCT_INTERVAL(n)           ((n)<<0)

#define SOLO_VD_CFG1                            0x0904

#define SOLO_VD_DEINTERLACE                     0x0908
#define   SOLO_VD_DEINTERLACE_THRESHOLD(n)      ((n)<<8)
#define   SOLO_VD_DEINTERLACE_EDGE_VALUE(n)     ((n)<<0)

#define SOLO_VD_CODE_ADR                        0x090C

#define SOLO_VD_CTRL                            0x0910
#define   SOLO_VD_OPER_ON                       (1<<31)
#define   SOLO_VD_MAX_ITEM(n)                   ((n)<<0)

#define SOLO_VD_STATUS0                         0x0920
#define   SOLO_VD_STATUS0_INTR_ACK              (1<<22)
#define   SOLO_VD_STATUS0_INTR_EMPTY            (1<<21)
#define   SOLO_VD_STATUS0_INTR_ERR              (1<<20)

#define SOLO_VD_STATUS1                         0x0924

#define SOLO_VD_IDX0                            0x0930
#define   SOLO_VD_IDX_INTERLACE                 (1<<30)
#define   SOLO_VD_IDX_CHANNEL(n)                ((n)<<24)
#define   SOLO_VD_IDX_SIZE(n)                   ((n)<<0)

#define SOLO_VD_IDX1                            0x0934
#define   SOLO_VD_IDX_SRC_SCALE(n)              ((n)<<28)
#define   SOLO_VD_IDX_WINDOW(n)                 ((n)<<24)
#define   SOLO_VD_IDX_DEINTERLACE               (1<<16)
#define   SOLO_VD_IDX_H_BLOCK(n)                ((n)<<8)
#define   SOLO_VD_IDX_V_BLOCK(n)                ((n)<<0)

#define SOLO_VD_IDX2                            0x0938
#define   SOLO_VD_IDX_REF_BASE_SIDE             (1<<31)
#define   SOLO_VD_IDX_REF_BASE(n)               (((n)>>16)&0xffff)

#define SOLO_VD_IDX3                            0x093C
#define   SOLO_VD_IDX_DISP_SCALE(n)             ((n)<<28)
#define   SOLO_VD_IDX_INTERLACE_WR              (1<<27)
#define   SOLO_VD_IDX_INTERPOL                  (1<<26)
#define   SOLO_VD_IDX_HOR2X                     (1<<25)
#define   SOLO_VD_IDX_OFFSET_X(n)               ((n)<<12)
#define   SOLO_VD_IDX_OFFSET_Y(n)               ((n)<<0)

#define SOLO_VD_IDX4                            0x0940
#define   SOLO_VD_IDX_DEC_WR_PAGE(n)            ((n)<<8)
#define   SOLO_VD_IDX_DISP_RD_PAGE(n)           ((n)<<0)

#define SOLO_VD_WR_PAGE(n)                      (0x03F0 + ((n) * 4))


#define SOLO_GPIO_CONFIG_0                      0x0B00
#define SOLO_GPIO_CONFIG_1                      0x0B04
#define SOLO_GPIO_DATA_OUT                      0x0B08
#define SOLO_GPIO_DATA_IN                       0x0B0C
#define SOLO_GPIO_INT_ACK_STA                   0x0B10
#define SOLO_GPIO_INT_ENA                       0x0B14
#define SOLO_GPIO_INT_CFG_0                     0x0B18
#define SOLO_GPIO_INT_CFG_1                     0x0B1C


#define SOLO_IIC_CFG                            0x0B20
#define   SOLO_IIC_ENABLE                       (1<<8)
#define   SOLO_IIC_PRESCALE(n)                  ((n)<<0)

#define SOLO_IIC_CTRL                           0x0B24
#define   SOLO_IIC_AUTO_CLEAR                   (1<<20)
#define   SOLO_IIC_STATE_RX_ACK                 (1<<19)
#define   SOLO_IIC_STATE_BUSY                   (1<<18)
#define   SOLO_IIC_STATE_SIG_ERR                (1<<17)
#define   SOLO_IIC_STATE_TRNS                   (1<<16)
#define   SOLO_IIC_CH_SET(n)                    ((n)<<5)
#define   SOLO_IIC_ACK_EN                       (1<<4)
#define   SOLO_IIC_START                        (1<<3)
#define   SOLO_IIC_STOP                         (1<<2)
#define   SOLO_IIC_READ                         (1<<1)
#define   SOLO_IIC_WRITE                        (1<<0)

#define SOLO_IIC_TXD                            0x0B28
#define SOLO_IIC_RXD                            0x0B2C

/*
 *      UART REGISTER
 */
#define SOLO_UART_CONTROL(n)                    (0x0BA0 + ((n)*0x20))
#define   SOLO_UART_CLK_DIV(n)                  ((n)<<24)
#define   SOLO_MODEM_CTRL_EN                    (1<<20)
#define   SOLO_PARITY_ERROR_DROP                (1<<18)
#define   SOLO_IRQ_ERR_EN                       (1<<17)
#define   SOLO_IRQ_RX_EN                        (1<<16)
#define   SOLO_IRQ_TX_EN                        (1<<15)
#define   SOLO_RX_EN                            (1<<14)
#define   SOLO_TX_EN                            (1<<13)
#define   SOLO_UART_HALF_DUPLEX                 (1<<12)
#define   SOLO_UART_LOOPBACK                    (1<<11)

#define   SOLO_BAUDRATE_230400                  ((0<<9)|(0<<6))
#define   SOLO_BAUDRATE_115200                  ((0<<9)|(1<<6))
#define   SOLO_BAUDRATE_57600                   ((0<<9)|(2<<6))
#define   SOLO_BAUDRATE_38400                   ((0<<9)|(3<<6))
#define   SOLO_BAUDRATE_19200                   ((0<<9)|(4<<6))
#define   SOLO_BAUDRATE_9600                    ((0<<9)|(5<<6))
#define   SOLO_BAUDRATE_4800                    ((0<<9)|(6<<6))
#define   SOLO_BAUDRATE_2400                    ((1<<9)|(6<<6))
#define   SOLO_BAUDRATE_1200                    ((2<<9)|(6<<6))
#define   SOLO_BAUDRATE_300                     ((3<<9)|(6<<6))

#define   SOLO_UART_DATA_BIT_8                  (3<<4)
#define   SOLO_UART_DATA_BIT_7                  (2<<4)
#define   SOLO_UART_DATA_BIT_6                  (1<<4)
#define   SOLO_UART_DATA_BIT_5                  (0<<4)

#define   SOLO_UART_STOP_BIT_1                  (0<<2)
#define   SOLO_UART_STOP_BIT_2                  (1<<2)

#define   SOLO_UART_PARITY_NONE                 (0<<0)
#define   SOLO_UART_PARITY_EVEN                 (2<<0)
#define   SOLO_UART_PARITY_ODD                  (3<<0)

#define SOLO_UART_STATUS(n)                     (0x0BA4 + ((n)*0x20))
#define   SOLO_UART_CTS                         (1<<15)
#define   SOLO_UART_RX_BUSY                     (1<<14)
#define   SOLO_UART_OVERRUN                     (1<<13)
#define   SOLO_UART_FRAME_ERR                   (1<<12)
#define   SOLO_UART_PARITY_ERR                  (1<<11)
#define   SOLO_UART_TX_BUSY                     (1<<5)

#define   SOLO_UART_RX_BUFF_CNT(stat)           (((stat)>>6) & 0x1f)
#define   SOLO_UART_RX_BUFF_SIZE                8
#define   SOLO_UART_TX_BUFF_CNT(stat)           (((stat)>>0) & 0x1f)
#define   SOLO_UART_TX_BUFF_SIZE                8

#define SOLO_UART_TX_DATA(n)                    (0x0BA8 + ((n)*0x20))
#define   SOLO_UART_TX_DATA_PUSH                (1<<8)
#define SOLO_UART_RX_DATA(n)                    (0x0BAC + ((n)*0x20))
#define   SOLO_UART_RX_DATA_POP                 (1<<8)

#define SOLO_TIMER_CLOCK_NUM                    0x0be0
#define SOLO_TIMER_WATCHDOG                     0x0be4
#define SOLO_TIMER_USEC                         0x0be8
#define SOLO_TIMER_SEC                          0x0bec

#define SOLO_AUDIO_CONTROL                      0x0D00
#define   SOLO_AUDIO_ENABLE                     (1<<31)
#define   SOLO_AUDIO_MASTER_MODE                (1<<30)
#define   SOLO_AUDIO_I2S_MODE                   (1<<29)
#define   SOLO_AUDIO_I2S_LR_SWAP                (1<<27)
#define   SOLO_AUDIO_I2S_8BIT                   (1<<26)
#define   SOLO_AUDIO_I2S_MULTI(n)               ((n)<<24)
#define   SOLO_AUDIO_MIX_9TO0                   (1<<23)
#define   SOLO_AUDIO_DEC_9TO0_VOL(n)            ((n)<<20)
#define   SOLO_AUDIO_MIX_19TO10                 (1<<19)
#define   SOLO_AUDIO_DEC_19TO10_VOL(n)          ((n)<<16)
#define   SOLO_AUDIO_MODE(n)                    ((n)<<0)
#define SOLO_AUDIO_SAMPLE                       0x0D04
#define   SOLO_AUDIO_EE_MODE_ON                 (1<<30)
#define   SOLO_AUDIO_EE_ENC_CH(ch)              ((ch)<<25)
#define   SOLO_AUDIO_BITRATE(n)                 ((n)<<16)
#define   SOLO_AUDIO_CLK_DIV(n)                 ((n)<<0)
#define SOLO_AUDIO_FDMA_INTR                    0x0D08
#define   SOLO_AUDIO_FDMA_INTERVAL(n)           ((n)<<19)
#define   SOLO_AUDIO_INTR_ORDER(n)              ((n)<<16)
#define   SOLO_AUDIO_FDMA_BASE(n)               ((n)<<0)
#define SOLO_AUDIO_EVOL_0                       0x0D0C
#define SOLO_AUDIO_EVOL_1                       0x0D10
#define   SOLO_AUDIO_EVOL(ch, value)            ((value)<<((ch)%10))
#define SOLO_AUDIO_STA                          0x0D14


#define SOLO_WATCHDOG                           0x0BE4
#define WATCHDOG_STAT(status)                   (status<<8)
#define WATCHDOG_TIME(sec)                      (sec&0xff)

#endif /* __SOLO6X10_REGISTERS_H */