Merge remote-tracking branch 'cleancache/linux-next'
[linux-2.6/next.git] / drivers / cpufreq / elanfreq.c
blobc587db472a75a21eeabb0c52a1df3b7f48b549f4
1 /*
2 * elanfreq: cpufreq driver for the AMD ELAN family
4 * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
6 * Parts of this code are (c) Sven Geggus <sven@geggus.net>
8 * All Rights Reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
15 * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/init.h>
23 #include <linux/delay.h>
24 #include <linux/cpufreq.h>
26 #include <asm/msr.h>
27 #include <linux/timex.h>
28 #include <linux/io.h>
30 #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
31 #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
33 /* Module parameter */
34 static int max_freq;
36 struct s_elan_multiplier {
37 int clock; /* frequency in kHz */
38 int val40h; /* PMU Force Mode register */
39 int val80h; /* CPU Clock Speed Register */
43 * It is important that the frequencies
44 * are listed in ascending order here!
46 static struct s_elan_multiplier elan_multiplier[] = {
47 {1000, 0x02, 0x18},
48 {2000, 0x02, 0x10},
49 {4000, 0x02, 0x08},
50 {8000, 0x00, 0x00},
51 {16000, 0x00, 0x02},
52 {33000, 0x00, 0x04},
53 {66000, 0x01, 0x04},
54 {99000, 0x01, 0x05}
57 static struct cpufreq_frequency_table elanfreq_table[] = {
58 {0, 1000},
59 {1, 2000},
60 {2, 4000},
61 {3, 8000},
62 {4, 16000},
63 {5, 33000},
64 {6, 66000},
65 {7, 99000},
66 {0, CPUFREQ_TABLE_END},
70 /**
71 * elanfreq_get_cpu_frequency: determine current cpu speed
73 * Finds out at which frequency the CPU of the Elan SOC runs
74 * at the moment. Frequencies from 1 to 33 MHz are generated
75 * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
76 * and have the rest of the chip running with 33 MHz.
79 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
81 u8 clockspeed_reg; /* Clock Speed Register */
83 local_irq_disable();
84 outb_p(0x80, REG_CSCIR);
85 clockspeed_reg = inb_p(REG_CSCDR);
86 local_irq_enable();
88 if ((clockspeed_reg & 0xE0) == 0xE0)
89 return 0;
91 /* Are we in CPU clock multiplied mode (66/99 MHz)? */
92 if ((clockspeed_reg & 0xE0) == 0xC0) {
93 if ((clockspeed_reg & 0x01) == 0)
94 return 66000;
95 else
96 return 99000;
99 /* 33 MHz is not 32 MHz... */
100 if ((clockspeed_reg & 0xE0) == 0xA0)
101 return 33000;
103 return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
108 * elanfreq_set_cpu_frequency: Change the CPU core frequency
109 * @cpu: cpu number
110 * @freq: frequency in kHz
112 * This function takes a frequency value and changes the CPU frequency
113 * according to this. Note that the frequency has to be checked by
114 * elanfreq_validatespeed() for correctness!
116 * There is no return value.
119 static void elanfreq_set_cpu_state(unsigned int state)
121 struct cpufreq_freqs freqs;
123 freqs.old = elanfreq_get_cpu_frequency(0);
124 freqs.new = elan_multiplier[state].clock;
125 freqs.cpu = 0; /* elanfreq.c is UP only driver */
127 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
129 printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
130 elan_multiplier[state].clock);
134 * Access to the Elan's internal registers is indexed via
135 * 0x22: Chip Setup & Control Register Index Register (CSCI)
136 * 0x23: Chip Setup & Control Register Data Register (CSCD)
141 * 0x40 is the Power Management Unit's Force Mode Register.
142 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
145 local_irq_disable();
146 outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
147 outb_p(0x00, REG_CSCDR);
148 local_irq_enable(); /* wait till internal pipelines and */
149 udelay(1000); /* buffers have cleaned up */
151 local_irq_disable();
153 /* now, set the CPU clock speed register (0x80) */
154 outb_p(0x80, REG_CSCIR);
155 outb_p(elan_multiplier[state].val80h, REG_CSCDR);
157 /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
158 outb_p(0x40, REG_CSCIR);
159 outb_p(elan_multiplier[state].val40h, REG_CSCDR);
160 udelay(10000);
161 local_irq_enable();
163 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
168 * elanfreq_validatespeed: test if frequency range is valid
169 * @policy: the policy to validate
171 * This function checks if a given frequency range in kHz is valid
172 * for the hardware supported by the driver.
175 static int elanfreq_verify(struct cpufreq_policy *policy)
177 return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
180 static int elanfreq_target(struct cpufreq_policy *policy,
181 unsigned int target_freq,
182 unsigned int relation)
184 unsigned int newstate = 0;
186 if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
187 target_freq, relation, &newstate))
188 return -EINVAL;
190 elanfreq_set_cpu_state(newstate);
192 return 0;
197 * Module init and exit code
200 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
202 struct cpuinfo_x86 *c = &cpu_data(0);
203 unsigned int i;
204 int result;
206 /* capability check */
207 if ((c->x86_vendor != X86_VENDOR_AMD) ||
208 (c->x86 != 4) || (c->x86_model != 10))
209 return -ENODEV;
211 /* max freq */
212 if (!max_freq)
213 max_freq = elanfreq_get_cpu_frequency(0);
215 /* table init */
216 for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
217 if (elanfreq_table[i].frequency > max_freq)
218 elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
221 /* cpuinfo and default policy values */
222 policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
223 policy->cur = elanfreq_get_cpu_frequency(0);
225 result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
226 if (result)
227 return result;
229 cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
230 return 0;
234 static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
236 cpufreq_frequency_table_put_attr(policy->cpu);
237 return 0;
241 #ifndef MODULE
243 * elanfreq_setup - elanfreq command line parameter parsing
245 * elanfreq command line parameter. Use:
246 * elanfreq=66000
247 * to set the maximum CPU frequency to 66 MHz. Note that in
248 * case you do not give this boot parameter, the maximum
249 * frequency will fall back to _current_ CPU frequency which
250 * might be lower. If you build this as a module, use the
251 * max_freq module parameter instead.
253 static int __init elanfreq_setup(char *str)
255 max_freq = simple_strtoul(str, &str, 0);
256 printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
257 return 1;
259 __setup("elanfreq=", elanfreq_setup);
260 #endif
263 static struct freq_attr *elanfreq_attr[] = {
264 &cpufreq_freq_attr_scaling_available_freqs,
265 NULL,
269 static struct cpufreq_driver elanfreq_driver = {
270 .get = elanfreq_get_cpu_frequency,
271 .verify = elanfreq_verify,
272 .target = elanfreq_target,
273 .init = elanfreq_cpu_init,
274 .exit = elanfreq_cpu_exit,
275 .name = "elanfreq",
276 .owner = THIS_MODULE,
277 .attr = elanfreq_attr,
281 static int __init elanfreq_init(void)
283 struct cpuinfo_x86 *c = &cpu_data(0);
285 /* Test if we have the right hardware */
286 if ((c->x86_vendor != X86_VENDOR_AMD) ||
287 (c->x86 != 4) || (c->x86_model != 10)) {
288 printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
289 return -ENODEV;
291 return cpufreq_register_driver(&elanfreq_driver);
295 static void __exit elanfreq_exit(void)
297 cpufreq_unregister_driver(&elanfreq_driver);
301 module_param(max_freq, int, 0444);
303 MODULE_LICENSE("GPL");
304 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
305 "Sven Geggus <sven@geggus.net>");
306 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
308 module_init(elanfreq_init);
309 module_exit(elanfreq_exit);