Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / arch / arm / mach-at91 / at91sam9260_devices.c
blob3c2b580b9d758a62279cfe9c76b532ae16647bd6
1 /*
2 * arch/arm/mach-at91/at91sam9260_devices.c
4 * Copyright (C) 2006 Atmel
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <asm/mach/arch.h>
13 #include <asm/mach/map.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/i2c-gpio.h>
20 #include <mach/board.h>
21 #include <mach/cpu.h>
22 #include <mach/at91sam9260.h>
23 #include <mach/at91sam9260_matrix.h>
24 #include <mach/at91sam9_smc.h>
26 #include "generic.h"
29 /* --------------------------------------------------------------------
30 * USB Host
31 * -------------------------------------------------------------------- */
33 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
34 static u64 ohci_dmamask = DMA_BIT_MASK(32);
35 static struct at91_usbh_data usbh_data;
37 static struct resource usbh_resources[] = {
38 [0] = {
39 .start = AT91SAM9260_UHP_BASE,
40 .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
41 .flags = IORESOURCE_MEM,
43 [1] = {
44 .start = AT91SAM9260_ID_UHP,
45 .end = AT91SAM9260_ID_UHP,
46 .flags = IORESOURCE_IRQ,
50 static struct platform_device at91_usbh_device = {
51 .name = "at91_ohci",
52 .id = -1,
53 .dev = {
54 .dma_mask = &ohci_dmamask,
55 .coherent_dma_mask = DMA_BIT_MASK(32),
56 .platform_data = &usbh_data,
58 .resource = usbh_resources,
59 .num_resources = ARRAY_SIZE(usbh_resources),
62 void __init at91_add_device_usbh(struct at91_usbh_data *data)
64 if (!data)
65 return;
67 usbh_data = *data;
68 platform_device_register(&at91_usbh_device);
70 #else
71 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
72 #endif
75 /* --------------------------------------------------------------------
76 * USB Device (Gadget)
77 * -------------------------------------------------------------------- */
79 #ifdef CONFIG_USB_GADGET_AT91
80 static struct at91_udc_data udc_data;
82 static struct resource udc_resources[] = {
83 [0] = {
84 .start = AT91SAM9260_BASE_UDP,
85 .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
86 .flags = IORESOURCE_MEM,
88 [1] = {
89 .start = AT91SAM9260_ID_UDP,
90 .end = AT91SAM9260_ID_UDP,
91 .flags = IORESOURCE_IRQ,
95 static struct platform_device at91_udc_device = {
96 .name = "at91_udc",
97 .id = -1,
98 .dev = {
99 .platform_data = &udc_data,
101 .resource = udc_resources,
102 .num_resources = ARRAY_SIZE(udc_resources),
105 void __init at91_add_device_udc(struct at91_udc_data *data)
107 if (!data)
108 return;
110 if (data->vbus_pin) {
111 at91_set_gpio_input(data->vbus_pin, 0);
112 at91_set_deglitch(data->vbus_pin, 1);
115 /* Pullup pin is handled internally by USB device peripheral */
117 udc_data = *data;
118 platform_device_register(&at91_udc_device);
120 #else
121 void __init at91_add_device_udc(struct at91_udc_data *data) {}
122 #endif
125 /* --------------------------------------------------------------------
126 * Ethernet
127 * -------------------------------------------------------------------- */
129 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
130 static u64 eth_dmamask = DMA_BIT_MASK(32);
131 static struct at91_eth_data eth_data;
133 static struct resource eth_resources[] = {
134 [0] = {
135 .start = AT91SAM9260_BASE_EMAC,
136 .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
137 .flags = IORESOURCE_MEM,
139 [1] = {
140 .start = AT91SAM9260_ID_EMAC,
141 .end = AT91SAM9260_ID_EMAC,
142 .flags = IORESOURCE_IRQ,
146 static struct platform_device at91sam9260_eth_device = {
147 .name = "macb",
148 .id = -1,
149 .dev = {
150 .dma_mask = &eth_dmamask,
151 .coherent_dma_mask = DMA_BIT_MASK(32),
152 .platform_data = &eth_data,
154 .resource = eth_resources,
155 .num_resources = ARRAY_SIZE(eth_resources),
158 void __init at91_add_device_eth(struct at91_eth_data *data)
160 if (!data)
161 return;
163 if (data->phy_irq_pin) {
164 at91_set_gpio_input(data->phy_irq_pin, 0);
165 at91_set_deglitch(data->phy_irq_pin, 1);
168 /* Pins used for MII and RMII */
169 at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
170 at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
171 at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
172 at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
173 at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
174 at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
175 at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
176 at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
177 at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
178 at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
180 if (!data->is_rmii) {
181 at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
182 at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
183 at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
184 at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
185 at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
186 at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
187 at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
188 at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
191 eth_data = *data;
192 platform_device_register(&at91sam9260_eth_device);
194 #else
195 void __init at91_add_device_eth(struct at91_eth_data *data) {}
196 #endif
199 /* --------------------------------------------------------------------
200 * MMC / SD
201 * -------------------------------------------------------------------- */
203 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
204 static u64 mmc_dmamask = DMA_BIT_MASK(32);
205 static struct at91_mmc_data mmc_data;
207 static struct resource mmc_resources[] = {
208 [0] = {
209 .start = AT91SAM9260_BASE_MCI,
210 .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
211 .flags = IORESOURCE_MEM,
213 [1] = {
214 .start = AT91SAM9260_ID_MCI,
215 .end = AT91SAM9260_ID_MCI,
216 .flags = IORESOURCE_IRQ,
220 static struct platform_device at91sam9260_mmc_device = {
221 .name = "at91_mci",
222 .id = -1,
223 .dev = {
224 .dma_mask = &mmc_dmamask,
225 .coherent_dma_mask = DMA_BIT_MASK(32),
226 .platform_data = &mmc_data,
228 .resource = mmc_resources,
229 .num_resources = ARRAY_SIZE(mmc_resources),
232 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
234 if (!data)
235 return;
237 /* input/irq */
238 if (data->det_pin) {
239 at91_set_gpio_input(data->det_pin, 1);
240 at91_set_deglitch(data->det_pin, 1);
242 if (data->wp_pin)
243 at91_set_gpio_input(data->wp_pin, 1);
244 if (data->vcc_pin)
245 at91_set_gpio_output(data->vcc_pin, 0);
247 /* CLK */
248 at91_set_A_periph(AT91_PIN_PA8, 0);
250 if (data->slot_b) {
251 /* CMD */
252 at91_set_B_periph(AT91_PIN_PA1, 1);
254 /* DAT0, maybe DAT1..DAT3 */
255 at91_set_B_periph(AT91_PIN_PA0, 1);
256 if (data->wire4) {
257 at91_set_B_periph(AT91_PIN_PA5, 1);
258 at91_set_B_periph(AT91_PIN_PA4, 1);
259 at91_set_B_periph(AT91_PIN_PA3, 1);
261 } else {
262 /* CMD */
263 at91_set_A_periph(AT91_PIN_PA7, 1);
265 /* DAT0, maybe DAT1..DAT3 */
266 at91_set_A_periph(AT91_PIN_PA6, 1);
267 if (data->wire4) {
268 at91_set_A_periph(AT91_PIN_PA9, 1);
269 at91_set_A_periph(AT91_PIN_PA10, 1);
270 at91_set_A_periph(AT91_PIN_PA11, 1);
274 mmc_data = *data;
275 platform_device_register(&at91sam9260_mmc_device);
277 #else
278 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
279 #endif
281 /* --------------------------------------------------------------------
282 * MMC / SD Slot for Atmel MCI Driver
283 * -------------------------------------------------------------------- */
285 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
286 static u64 mmc_dmamask = DMA_BIT_MASK(32);
287 static struct mci_platform_data mmc_data;
289 static struct resource mmc_resources[] = {
290 [0] = {
291 .start = AT91SAM9260_BASE_MCI,
292 .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
293 .flags = IORESOURCE_MEM,
295 [1] = {
296 .start = AT91SAM9260_ID_MCI,
297 .end = AT91SAM9260_ID_MCI,
298 .flags = IORESOURCE_IRQ,
302 static struct platform_device at91sam9260_mmc_device = {
303 .name = "atmel_mci",
304 .id = -1,
305 .dev = {
306 .dma_mask = &mmc_dmamask,
307 .coherent_dma_mask = DMA_BIT_MASK(32),
308 .platform_data = &mmc_data,
310 .resource = mmc_resources,
311 .num_resources = ARRAY_SIZE(mmc_resources),
314 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
316 unsigned int i;
317 unsigned int slot_count = 0;
319 if (!data)
320 return;
322 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
323 if (data->slot[i].bus_width) {
324 /* input/irq */
325 if (data->slot[i].detect_pin) {
326 at91_set_gpio_input(data->slot[i].detect_pin, 1);
327 at91_set_deglitch(data->slot[i].detect_pin, 1);
329 if (data->slot[i].wp_pin)
330 at91_set_gpio_input(data->slot[i].wp_pin, 1);
332 switch (i) {
333 case 0:
334 /* CMD */
335 at91_set_A_periph(AT91_PIN_PA7, 1);
336 /* DAT0, maybe DAT1..DAT3 */
337 at91_set_A_periph(AT91_PIN_PA6, 1);
338 if (data->slot[i].bus_width == 4) {
339 at91_set_A_periph(AT91_PIN_PA9, 1);
340 at91_set_A_periph(AT91_PIN_PA10, 1);
341 at91_set_A_periph(AT91_PIN_PA11, 1);
343 slot_count++;
344 break;
345 case 1:
346 /* CMD */
347 at91_set_B_periph(AT91_PIN_PA1, 1);
348 /* DAT0, maybe DAT1..DAT3 */
349 at91_set_B_periph(AT91_PIN_PA0, 1);
350 if (data->slot[i].bus_width == 4) {
351 at91_set_B_periph(AT91_PIN_PA5, 1);
352 at91_set_B_periph(AT91_PIN_PA4, 1);
353 at91_set_B_periph(AT91_PIN_PA3, 1);
355 slot_count++;
356 break;
357 default:
358 printk(KERN_ERR
359 "AT91: SD/MMC slot %d not available\n", i);
360 break;
365 if (slot_count) {
366 /* CLK */
367 at91_set_A_periph(AT91_PIN_PA8, 0);
369 mmc_data = *data;
370 platform_device_register(&at91sam9260_mmc_device);
373 #else
374 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
375 #endif
378 /* --------------------------------------------------------------------
379 * NAND / SmartMedia
380 * -------------------------------------------------------------------- */
382 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
383 static struct atmel_nand_data nand_data;
385 #define NAND_BASE AT91_CHIPSELECT_3
387 static struct resource nand_resources[] = {
388 [0] = {
389 .start = NAND_BASE,
390 .end = NAND_BASE + SZ_256M - 1,
391 .flags = IORESOURCE_MEM,
393 [1] = {
394 .start = AT91_BASE_SYS + AT91_ECC,
395 .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
396 .flags = IORESOURCE_MEM,
400 static struct platform_device at91sam9260_nand_device = {
401 .name = "atmel_nand",
402 .id = -1,
403 .dev = {
404 .platform_data = &nand_data,
406 .resource = nand_resources,
407 .num_resources = ARRAY_SIZE(nand_resources),
410 void __init at91_add_device_nand(struct atmel_nand_data *data)
412 unsigned long csa;
414 if (!data)
415 return;
417 csa = at91_sys_read(AT91_MATRIX_EBICSA);
418 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
420 /* enable pin */
421 if (data->enable_pin)
422 at91_set_gpio_output(data->enable_pin, 1);
424 /* ready/busy pin */
425 if (data->rdy_pin)
426 at91_set_gpio_input(data->rdy_pin, 1);
428 /* card detect pin */
429 if (data->det_pin)
430 at91_set_gpio_input(data->det_pin, 1);
432 nand_data = *data;
433 platform_device_register(&at91sam9260_nand_device);
435 #else
436 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
437 #endif
440 /* --------------------------------------------------------------------
441 * TWI (i2c)
442 * -------------------------------------------------------------------- */
445 * Prefer the GPIO code since the TWI controller isn't robust
446 * (gets overruns and underruns under load) and can only issue
447 * repeated STARTs in one scenario (the driver doesn't yet handle them).
450 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
452 static struct i2c_gpio_platform_data pdata = {
453 .sda_pin = AT91_PIN_PA23,
454 .sda_is_open_drain = 1,
455 .scl_pin = AT91_PIN_PA24,
456 .scl_is_open_drain = 1,
457 .udelay = 2, /* ~100 kHz */
460 static struct platform_device at91sam9260_twi_device = {
461 .name = "i2c-gpio",
462 .id = -1,
463 .dev.platform_data = &pdata,
466 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
468 at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
469 at91_set_multi_drive(AT91_PIN_PA23, 1);
471 at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
472 at91_set_multi_drive(AT91_PIN_PA24, 1);
474 i2c_register_board_info(0, devices, nr_devices);
475 platform_device_register(&at91sam9260_twi_device);
478 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
480 static struct resource twi_resources[] = {
481 [0] = {
482 .start = AT91SAM9260_BASE_TWI,
483 .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
484 .flags = IORESOURCE_MEM,
486 [1] = {
487 .start = AT91SAM9260_ID_TWI,
488 .end = AT91SAM9260_ID_TWI,
489 .flags = IORESOURCE_IRQ,
493 static struct platform_device at91sam9260_twi_device = {
494 .name = "at91_i2c",
495 .id = -1,
496 .resource = twi_resources,
497 .num_resources = ARRAY_SIZE(twi_resources),
500 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
502 /* pins used for TWI interface */
503 at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
504 at91_set_multi_drive(AT91_PIN_PA23, 1);
506 at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
507 at91_set_multi_drive(AT91_PIN_PA24, 1);
509 i2c_register_board_info(0, devices, nr_devices);
510 platform_device_register(&at91sam9260_twi_device);
512 #else
513 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
514 #endif
517 /* --------------------------------------------------------------------
518 * SPI
519 * -------------------------------------------------------------------- */
521 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
522 static u64 spi_dmamask = DMA_BIT_MASK(32);
524 static struct resource spi0_resources[] = {
525 [0] = {
526 .start = AT91SAM9260_BASE_SPI0,
527 .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
528 .flags = IORESOURCE_MEM,
530 [1] = {
531 .start = AT91SAM9260_ID_SPI0,
532 .end = AT91SAM9260_ID_SPI0,
533 .flags = IORESOURCE_IRQ,
537 static struct platform_device at91sam9260_spi0_device = {
538 .name = "atmel_spi",
539 .id = 0,
540 .dev = {
541 .dma_mask = &spi_dmamask,
542 .coherent_dma_mask = DMA_BIT_MASK(32),
544 .resource = spi0_resources,
545 .num_resources = ARRAY_SIZE(spi0_resources),
548 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
550 static struct resource spi1_resources[] = {
551 [0] = {
552 .start = AT91SAM9260_BASE_SPI1,
553 .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
554 .flags = IORESOURCE_MEM,
556 [1] = {
557 .start = AT91SAM9260_ID_SPI1,
558 .end = AT91SAM9260_ID_SPI1,
559 .flags = IORESOURCE_IRQ,
563 static struct platform_device at91sam9260_spi1_device = {
564 .name = "atmel_spi",
565 .id = 1,
566 .dev = {
567 .dma_mask = &spi_dmamask,
568 .coherent_dma_mask = DMA_BIT_MASK(32),
570 .resource = spi1_resources,
571 .num_resources = ARRAY_SIZE(spi1_resources),
574 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
576 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
578 int i;
579 unsigned long cs_pin;
580 short enable_spi0 = 0;
581 short enable_spi1 = 0;
583 /* Choose SPI chip-selects */
584 for (i = 0; i < nr_devices; i++) {
585 if (devices[i].controller_data)
586 cs_pin = (unsigned long) devices[i].controller_data;
587 else if (devices[i].bus_num == 0)
588 cs_pin = spi0_standard_cs[devices[i].chip_select];
589 else
590 cs_pin = spi1_standard_cs[devices[i].chip_select];
592 if (devices[i].bus_num == 0)
593 enable_spi0 = 1;
594 else
595 enable_spi1 = 1;
597 /* enable chip-select pin */
598 at91_set_gpio_output(cs_pin, 1);
600 /* pass chip-select pin to driver */
601 devices[i].controller_data = (void *) cs_pin;
604 spi_register_board_info(devices, nr_devices);
606 /* Configure SPI bus(es) */
607 if (enable_spi0) {
608 at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
609 at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
610 at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
612 platform_device_register(&at91sam9260_spi0_device);
614 if (enable_spi1) {
615 at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
616 at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
617 at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
619 platform_device_register(&at91sam9260_spi1_device);
622 #else
623 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
624 #endif
627 /* --------------------------------------------------------------------
628 * Timer/Counter blocks
629 * -------------------------------------------------------------------- */
631 #ifdef CONFIG_ATMEL_TCLIB
633 static struct resource tcb0_resources[] = {
634 [0] = {
635 .start = AT91SAM9260_BASE_TCB0,
636 .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
637 .flags = IORESOURCE_MEM,
639 [1] = {
640 .start = AT91SAM9260_ID_TC0,
641 .end = AT91SAM9260_ID_TC0,
642 .flags = IORESOURCE_IRQ,
644 [2] = {
645 .start = AT91SAM9260_ID_TC1,
646 .end = AT91SAM9260_ID_TC1,
647 .flags = IORESOURCE_IRQ,
649 [3] = {
650 .start = AT91SAM9260_ID_TC2,
651 .end = AT91SAM9260_ID_TC2,
652 .flags = IORESOURCE_IRQ,
656 static struct platform_device at91sam9260_tcb0_device = {
657 .name = "atmel_tcb",
658 .id = 0,
659 .resource = tcb0_resources,
660 .num_resources = ARRAY_SIZE(tcb0_resources),
663 static struct resource tcb1_resources[] = {
664 [0] = {
665 .start = AT91SAM9260_BASE_TCB1,
666 .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
667 .flags = IORESOURCE_MEM,
669 [1] = {
670 .start = AT91SAM9260_ID_TC3,
671 .end = AT91SAM9260_ID_TC3,
672 .flags = IORESOURCE_IRQ,
674 [2] = {
675 .start = AT91SAM9260_ID_TC4,
676 .end = AT91SAM9260_ID_TC4,
677 .flags = IORESOURCE_IRQ,
679 [3] = {
680 .start = AT91SAM9260_ID_TC5,
681 .end = AT91SAM9260_ID_TC5,
682 .flags = IORESOURCE_IRQ,
686 static struct platform_device at91sam9260_tcb1_device = {
687 .name = "atmel_tcb",
688 .id = 1,
689 .resource = tcb1_resources,
690 .num_resources = ARRAY_SIZE(tcb1_resources),
693 static void __init at91_add_device_tc(void)
695 platform_device_register(&at91sam9260_tcb0_device);
696 platform_device_register(&at91sam9260_tcb1_device);
698 #else
699 static void __init at91_add_device_tc(void) { }
700 #endif
703 /* --------------------------------------------------------------------
704 * RTT
705 * -------------------------------------------------------------------- */
707 static struct resource rtt_resources[] = {
709 .start = AT91_BASE_SYS + AT91_RTT,
710 .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
711 .flags = IORESOURCE_MEM,
715 static struct platform_device at91sam9260_rtt_device = {
716 .name = "at91_rtt",
717 .id = 0,
718 .resource = rtt_resources,
719 .num_resources = ARRAY_SIZE(rtt_resources),
722 static void __init at91_add_device_rtt(void)
724 platform_device_register(&at91sam9260_rtt_device);
728 /* --------------------------------------------------------------------
729 * Watchdog
730 * -------------------------------------------------------------------- */
732 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
733 static struct platform_device at91sam9260_wdt_device = {
734 .name = "at91_wdt",
735 .id = -1,
736 .num_resources = 0,
739 static void __init at91_add_device_watchdog(void)
741 platform_device_register(&at91sam9260_wdt_device);
743 #else
744 static void __init at91_add_device_watchdog(void) {}
745 #endif
748 /* --------------------------------------------------------------------
749 * SSC -- Synchronous Serial Controller
750 * -------------------------------------------------------------------- */
752 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
753 static u64 ssc_dmamask = DMA_BIT_MASK(32);
755 static struct resource ssc_resources[] = {
756 [0] = {
757 .start = AT91SAM9260_BASE_SSC,
758 .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
759 .flags = IORESOURCE_MEM,
761 [1] = {
762 .start = AT91SAM9260_ID_SSC,
763 .end = AT91SAM9260_ID_SSC,
764 .flags = IORESOURCE_IRQ,
768 static struct platform_device at91sam9260_ssc_device = {
769 .name = "ssc",
770 .id = 0,
771 .dev = {
772 .dma_mask = &ssc_dmamask,
773 .coherent_dma_mask = DMA_BIT_MASK(32),
775 .resource = ssc_resources,
776 .num_resources = ARRAY_SIZE(ssc_resources),
779 static inline void configure_ssc_pins(unsigned pins)
781 if (pins & ATMEL_SSC_TF)
782 at91_set_A_periph(AT91_PIN_PB17, 1);
783 if (pins & ATMEL_SSC_TK)
784 at91_set_A_periph(AT91_PIN_PB16, 1);
785 if (pins & ATMEL_SSC_TD)
786 at91_set_A_periph(AT91_PIN_PB18, 1);
787 if (pins & ATMEL_SSC_RD)
788 at91_set_A_periph(AT91_PIN_PB19, 1);
789 if (pins & ATMEL_SSC_RK)
790 at91_set_A_periph(AT91_PIN_PB20, 1);
791 if (pins & ATMEL_SSC_RF)
792 at91_set_A_periph(AT91_PIN_PB21, 1);
796 * SSC controllers are accessed through library code, instead of any
797 * kind of all-singing/all-dancing driver. For example one could be
798 * used by a particular I2S audio codec's driver, while another one
799 * on the same system might be used by a custom data capture driver.
801 void __init at91_add_device_ssc(unsigned id, unsigned pins)
803 struct platform_device *pdev;
806 * NOTE: caller is responsible for passing information matching
807 * "pins" to whatever will be using each particular controller.
809 switch (id) {
810 case AT91SAM9260_ID_SSC:
811 pdev = &at91sam9260_ssc_device;
812 configure_ssc_pins(pins);
813 break;
814 default:
815 return;
818 platform_device_register(pdev);
821 #else
822 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
823 #endif
826 /* --------------------------------------------------------------------
827 * UART
828 * -------------------------------------------------------------------- */
829 #if defined(CONFIG_SERIAL_ATMEL)
830 static struct resource dbgu_resources[] = {
831 [0] = {
832 .start = AT91_VA_BASE_SYS + AT91_DBGU,
833 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
834 .flags = IORESOURCE_MEM,
836 [1] = {
837 .start = AT91_ID_SYS,
838 .end = AT91_ID_SYS,
839 .flags = IORESOURCE_IRQ,
843 static struct atmel_uart_data dbgu_data = {
844 .use_dma_tx = 0,
845 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
846 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
849 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
851 static struct platform_device at91sam9260_dbgu_device = {
852 .name = "atmel_usart",
853 .id = 0,
854 .dev = {
855 .dma_mask = &dbgu_dmamask,
856 .coherent_dma_mask = DMA_BIT_MASK(32),
857 .platform_data = &dbgu_data,
859 .resource = dbgu_resources,
860 .num_resources = ARRAY_SIZE(dbgu_resources),
863 static inline void configure_dbgu_pins(void)
865 at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
866 at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
869 static struct resource uart0_resources[] = {
870 [0] = {
871 .start = AT91SAM9260_BASE_US0,
872 .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
873 .flags = IORESOURCE_MEM,
875 [1] = {
876 .start = AT91SAM9260_ID_US0,
877 .end = AT91SAM9260_ID_US0,
878 .flags = IORESOURCE_IRQ,
882 static struct atmel_uart_data uart0_data = {
883 .use_dma_tx = 1,
884 .use_dma_rx = 1,
887 static u64 uart0_dmamask = DMA_BIT_MASK(32);
889 static struct platform_device at91sam9260_uart0_device = {
890 .name = "atmel_usart",
891 .id = 1,
892 .dev = {
893 .dma_mask = &uart0_dmamask,
894 .coherent_dma_mask = DMA_BIT_MASK(32),
895 .platform_data = &uart0_data,
897 .resource = uart0_resources,
898 .num_resources = ARRAY_SIZE(uart0_resources),
901 static inline void configure_usart0_pins(unsigned pins)
903 at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
904 at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
906 if (pins & ATMEL_UART_RTS)
907 at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
908 if (pins & ATMEL_UART_CTS)
909 at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
910 if (pins & ATMEL_UART_DTR)
911 at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
912 if (pins & ATMEL_UART_DSR)
913 at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
914 if (pins & ATMEL_UART_DCD)
915 at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
916 if (pins & ATMEL_UART_RI)
917 at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
920 static struct resource uart1_resources[] = {
921 [0] = {
922 .start = AT91SAM9260_BASE_US1,
923 .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
924 .flags = IORESOURCE_MEM,
926 [1] = {
927 .start = AT91SAM9260_ID_US1,
928 .end = AT91SAM9260_ID_US1,
929 .flags = IORESOURCE_IRQ,
933 static struct atmel_uart_data uart1_data = {
934 .use_dma_tx = 1,
935 .use_dma_rx = 1,
938 static u64 uart1_dmamask = DMA_BIT_MASK(32);
940 static struct platform_device at91sam9260_uart1_device = {
941 .name = "atmel_usart",
942 .id = 2,
943 .dev = {
944 .dma_mask = &uart1_dmamask,
945 .coherent_dma_mask = DMA_BIT_MASK(32),
946 .platform_data = &uart1_data,
948 .resource = uart1_resources,
949 .num_resources = ARRAY_SIZE(uart1_resources),
952 static inline void configure_usart1_pins(unsigned pins)
954 at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
955 at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
957 if (pins & ATMEL_UART_RTS)
958 at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
959 if (pins & ATMEL_UART_CTS)
960 at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
963 static struct resource uart2_resources[] = {
964 [0] = {
965 .start = AT91SAM9260_BASE_US2,
966 .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
967 .flags = IORESOURCE_MEM,
969 [1] = {
970 .start = AT91SAM9260_ID_US2,
971 .end = AT91SAM9260_ID_US2,
972 .flags = IORESOURCE_IRQ,
976 static struct atmel_uart_data uart2_data = {
977 .use_dma_tx = 1,
978 .use_dma_rx = 1,
981 static u64 uart2_dmamask = DMA_BIT_MASK(32);
983 static struct platform_device at91sam9260_uart2_device = {
984 .name = "atmel_usart",
985 .id = 3,
986 .dev = {
987 .dma_mask = &uart2_dmamask,
988 .coherent_dma_mask = DMA_BIT_MASK(32),
989 .platform_data = &uart2_data,
991 .resource = uart2_resources,
992 .num_resources = ARRAY_SIZE(uart2_resources),
995 static inline void configure_usart2_pins(unsigned pins)
997 at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
998 at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
1000 if (pins & ATMEL_UART_RTS)
1001 at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
1002 if (pins & ATMEL_UART_CTS)
1003 at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
1006 static struct resource uart3_resources[] = {
1007 [0] = {
1008 .start = AT91SAM9260_BASE_US3,
1009 .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
1010 .flags = IORESOURCE_MEM,
1012 [1] = {
1013 .start = AT91SAM9260_ID_US3,
1014 .end = AT91SAM9260_ID_US3,
1015 .flags = IORESOURCE_IRQ,
1019 static struct atmel_uart_data uart3_data = {
1020 .use_dma_tx = 1,
1021 .use_dma_rx = 1,
1024 static u64 uart3_dmamask = DMA_BIT_MASK(32);
1026 static struct platform_device at91sam9260_uart3_device = {
1027 .name = "atmel_usart",
1028 .id = 4,
1029 .dev = {
1030 .dma_mask = &uart3_dmamask,
1031 .coherent_dma_mask = DMA_BIT_MASK(32),
1032 .platform_data = &uart3_data,
1034 .resource = uart3_resources,
1035 .num_resources = ARRAY_SIZE(uart3_resources),
1038 static inline void configure_usart3_pins(unsigned pins)
1040 at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
1041 at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
1043 if (pins & ATMEL_UART_RTS)
1044 at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
1045 if (pins & ATMEL_UART_CTS)
1046 at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
1049 static struct resource uart4_resources[] = {
1050 [0] = {
1051 .start = AT91SAM9260_BASE_US4,
1052 .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
1053 .flags = IORESOURCE_MEM,
1055 [1] = {
1056 .start = AT91SAM9260_ID_US4,
1057 .end = AT91SAM9260_ID_US4,
1058 .flags = IORESOURCE_IRQ,
1062 static struct atmel_uart_data uart4_data = {
1063 .use_dma_tx = 1,
1064 .use_dma_rx = 1,
1067 static u64 uart4_dmamask = DMA_BIT_MASK(32);
1069 static struct platform_device at91sam9260_uart4_device = {
1070 .name = "atmel_usart",
1071 .id = 5,
1072 .dev = {
1073 .dma_mask = &uart4_dmamask,
1074 .coherent_dma_mask = DMA_BIT_MASK(32),
1075 .platform_data = &uart4_data,
1077 .resource = uart4_resources,
1078 .num_resources = ARRAY_SIZE(uart4_resources),
1081 static inline void configure_usart4_pins(void)
1083 at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
1084 at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
1087 static struct resource uart5_resources[] = {
1088 [0] = {
1089 .start = AT91SAM9260_BASE_US5,
1090 .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
1091 .flags = IORESOURCE_MEM,
1093 [1] = {
1094 .start = AT91SAM9260_ID_US5,
1095 .end = AT91SAM9260_ID_US5,
1096 .flags = IORESOURCE_IRQ,
1100 static struct atmel_uart_data uart5_data = {
1101 .use_dma_tx = 1,
1102 .use_dma_rx = 1,
1105 static u64 uart5_dmamask = DMA_BIT_MASK(32);
1107 static struct platform_device at91sam9260_uart5_device = {
1108 .name = "atmel_usart",
1109 .id = 6,
1110 .dev = {
1111 .dma_mask = &uart5_dmamask,
1112 .coherent_dma_mask = DMA_BIT_MASK(32),
1113 .platform_data = &uart5_data,
1115 .resource = uart5_resources,
1116 .num_resources = ARRAY_SIZE(uart5_resources),
1119 static inline void configure_usart5_pins(void)
1121 at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
1122 at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
1125 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
1126 struct platform_device *atmel_default_console_device; /* the serial console device */
1128 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1130 struct platform_device *pdev;
1131 struct atmel_uart_data *pdata;
1133 switch (id) {
1134 case 0: /* DBGU */
1135 pdev = &at91sam9260_dbgu_device;
1136 configure_dbgu_pins();
1137 break;
1138 case AT91SAM9260_ID_US0:
1139 pdev = &at91sam9260_uart0_device;
1140 configure_usart0_pins(pins);
1141 break;
1142 case AT91SAM9260_ID_US1:
1143 pdev = &at91sam9260_uart1_device;
1144 configure_usart1_pins(pins);
1145 break;
1146 case AT91SAM9260_ID_US2:
1147 pdev = &at91sam9260_uart2_device;
1148 configure_usart2_pins(pins);
1149 break;
1150 case AT91SAM9260_ID_US3:
1151 pdev = &at91sam9260_uart3_device;
1152 configure_usart3_pins(pins);
1153 break;
1154 case AT91SAM9260_ID_US4:
1155 pdev = &at91sam9260_uart4_device;
1156 configure_usart4_pins();
1157 break;
1158 case AT91SAM9260_ID_US5:
1159 pdev = &at91sam9260_uart5_device;
1160 configure_usart5_pins();
1161 break;
1162 default:
1163 return;
1165 pdata = pdev->dev.platform_data;
1166 pdata->num = portnr; /* update to mapped ID */
1168 if (portnr < ATMEL_MAX_UART)
1169 at91_uarts[portnr] = pdev;
1172 void __init at91_set_serial_console(unsigned portnr)
1174 if (portnr < ATMEL_MAX_UART) {
1175 atmel_default_console_device = at91_uarts[portnr];
1176 at91sam9260_set_console_clock(at91_uarts[portnr]->id);
1180 void __init at91_add_device_serial(void)
1182 int i;
1184 for (i = 0; i < ATMEL_MAX_UART; i++) {
1185 if (at91_uarts[i])
1186 platform_device_register(at91_uarts[i]);
1189 if (!atmel_default_console_device)
1190 printk(KERN_INFO "AT91: No default serial console defined.\n");
1192 #else
1193 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1194 void __init at91_set_serial_console(unsigned portnr) {}
1195 void __init at91_add_device_serial(void) {}
1196 #endif
1198 /* --------------------------------------------------------------------
1199 * CF/IDE
1200 * -------------------------------------------------------------------- */
1202 #if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
1203 defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
1204 defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
1206 static struct at91_cf_data cf0_data;
1208 static struct resource cf0_resources[] = {
1209 [0] = {
1210 .start = AT91_CHIPSELECT_4,
1211 .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
1212 .flags = IORESOURCE_MEM,
1216 static struct platform_device cf0_device = {
1217 .id = 0,
1218 .dev = {
1219 .platform_data = &cf0_data,
1221 .resource = cf0_resources,
1222 .num_resources = ARRAY_SIZE(cf0_resources),
1225 static struct at91_cf_data cf1_data;
1227 static struct resource cf1_resources[] = {
1228 [0] = {
1229 .start = AT91_CHIPSELECT_5,
1230 .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
1231 .flags = IORESOURCE_MEM,
1235 static struct platform_device cf1_device = {
1236 .id = 1,
1237 .dev = {
1238 .platform_data = &cf1_data,
1240 .resource = cf1_resources,
1241 .num_resources = ARRAY_SIZE(cf1_resources),
1244 void __init at91_add_device_cf(struct at91_cf_data *data)
1246 struct platform_device *pdev;
1247 unsigned long csa;
1249 if (!data)
1250 return;
1252 csa = at91_sys_read(AT91_MATRIX_EBICSA);
1254 switch (data->chipselect) {
1255 case 4:
1256 at91_set_multi_drive(AT91_PIN_PC8, 0);
1257 at91_set_A_periph(AT91_PIN_PC8, 0);
1258 csa |= AT91_MATRIX_CS4A_SMC_CF1;
1259 cf0_data = *data;
1260 pdev = &cf0_device;
1261 break;
1262 case 5:
1263 at91_set_multi_drive(AT91_PIN_PC9, 0);
1264 at91_set_A_periph(AT91_PIN_PC9, 0);
1265 csa |= AT91_MATRIX_CS5A_SMC_CF2;
1266 cf1_data = *data;
1267 pdev = &cf1_device;
1268 break;
1269 default:
1270 printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
1271 data->chipselect);
1272 return;
1275 at91_sys_write(AT91_MATRIX_EBICSA, csa);
1277 if (data->rst_pin) {
1278 at91_set_multi_drive(data->rst_pin, 0);
1279 at91_set_gpio_output(data->rst_pin, 1);
1282 if (data->irq_pin) {
1283 at91_set_gpio_input(data->irq_pin, 0);
1284 at91_set_deglitch(data->irq_pin, 1);
1287 if (data->det_pin) {
1288 at91_set_gpio_input(data->det_pin, 0);
1289 at91_set_deglitch(data->det_pin, 1);
1292 at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
1293 at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
1294 at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
1295 at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
1297 if (data->flags & AT91_CF_TRUE_IDE)
1298 #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
1299 pdev->name = "pata_at91";
1300 #elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
1301 pdev->name = "at91_ide";
1302 #else
1303 #warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
1304 #endif
1305 else
1306 pdev->name = "at91_cf";
1308 platform_device_register(pdev);
1311 #else
1312 void __init at91_add_device_cf(struct at91_cf_data * data) {}
1313 #endif
1315 /* -------------------------------------------------------------------- */
1317 * These devices are always present and don't need any board-specific
1318 * setup.
1320 static int __init at91_add_standard_devices(void)
1322 at91_add_device_rtt();
1323 at91_add_device_watchdog();
1324 at91_add_device_tc();
1325 return 0;
1328 arch_initcall(at91_add_standard_devices);