?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / arch / arm / mach-lpc32xx / phy3250.c
blob6d2f0d1b9373243d586ae4ef3a33452f48766a5d
1 /*
2 * arch/arm/mach-lpc32xx/phy3250.c
3 *
4 * Author: Kevin Wells <kevin.wells@nxp.com>
5 *
6 * Copyright (C) 2010 NXP Semiconductors
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19 #include <linux/init.h>
20 #include <linux/platform_device.h>
21 #include <linux/sysdev.h>
22 #include <linux/interrupt.h>
23 #include <linux/irq.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/device.h>
26 #include <linux/spi/spi.h>
27 #include <linux/spi/eeprom.h>
28 #include <linux/leds.h>
29 #include <linux/gpio.h>
30 #include <linux/amba/bus.h>
31 #include <linux/amba/clcd.h>
32 #include <linux/amba/pl022.h>
33
34 #include <asm/setup.h>
35 #include <asm/mach-types.h>
36 #include <asm/mach/arch.h>
37
38 #include <mach/hardware.h>
39 #include <mach/platform.h>
40 #include <mach/gpio-lpc32xx.h>
41 #include "common.h"
42
43 /*
44 * Mapped GPIOLIB GPIOs
45 */
46 #define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
47 #define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
48 #define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
49 #define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
50
51 /*
52 * AMBA LCD controller
53 */
54 static struct clcd_panel conn_lcd_panel = {
55 .mode = {
56 .name = "QVGA portrait",
57 .refresh = 60,
58 .xres = 240,
59 .yres = 320,
60 .pixclock = 191828,
61 .left_margin = 22,
62 .right_margin = 11,
63 .upper_margin = 2,
64 .lower_margin = 1,
65 .hsync_len = 5,
66 .vsync_len = 2,
67 .sync = 0,
68 .vmode = FB_VMODE_NONINTERLACED,
69 },
70 .width = -1,
71 .height = -1,
72 .tim2 = (TIM2_IVS | TIM2_IHS),
73 .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
74 CNTL_LCDBPP16_565),
75 .bpp = 16,
76 };
77 #define PANEL_SIZE (3 * SZ_64K)
78
79 static int lpc32xx_clcd_setup(struct clcd_fb *fb)
80 {
81 dma_addr_t dma;
82
83 fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
84 PANEL_SIZE, &dma, GFP_KERNEL);
85 if (!fb->fb.screen_base) {
86 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
87 return -ENOMEM;
88 }
89
90 fb->fb.fix.smem_start = dma;
91 fb->fb.fix.smem_len = PANEL_SIZE;
92 fb->panel = &conn_lcd_panel;
93
94 if (gpio_request(LCD_POWER_GPIO, "LCD power"))
95 printk(KERN_ERR "Error requesting gpio %u",
96 LCD_POWER_GPIO);
97 else if (gpio_direction_output(LCD_POWER_GPIO, 1))
98 printk(KERN_ERR "Error setting gpio %u to output",
99 LCD_POWER_GPIO);
100
101 if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
102 printk(KERN_ERR "Error requesting gpio %u",
103 BKL_POWER_GPIO);
104 else if (gpio_direction_output(BKL_POWER_GPIO, 1))
105 printk(KERN_ERR "Error setting gpio %u to output",
106 BKL_POWER_GPIO);
107
108 return 0;
109 }
110
111 static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
112 {
113 return dma_mmap_writecombine(&fb->dev->dev, vma,
114 fb->fb.screen_base, fb->fb.fix.smem_start,
115 fb->fb.fix.smem_len);
116 }
117
118 static void lpc32xx_clcd_remove(struct clcd_fb *fb)
119 {
120 dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
121 fb->fb.screen_base, fb->fb.fix.smem_start);
122 }
123
124 /*
125 * On some early LCD modules (1307.0), the backlight logic is inverted.
126 * For those board variants, swap the disable and enable states for
127 * BKL_POWER_GPIO.
128 */
129 static void clcd_disable(struct clcd_fb *fb)
130 {
131 gpio_set_value(BKL_POWER_GPIO, 0);
132 gpio_set_value(LCD_POWER_GPIO, 0);
133 }
134
135 static void clcd_enable(struct clcd_fb *fb)
136 {
137 gpio_set_value(BKL_POWER_GPIO, 1);
138 gpio_set_value(LCD_POWER_GPIO, 1);
139 }
140
141 static struct clcd_board lpc32xx_clcd_data = {
142 .name = "Phytec LCD",
143 .check = clcdfb_check,
144 .decode = clcdfb_decode,
145 .disable = clcd_disable,
146 .enable = clcd_enable,
147 .setup = lpc32xx_clcd_setup,
148 .mmap = lpc32xx_clcd_mmap,
149 .remove = lpc32xx_clcd_remove,
150 };
151
152 static struct amba_device lpc32xx_clcd_device = {
153 .dev = {
154 .coherent_dma_mask = ~0,
155 .init_name = "dev:clcd",
156 .platform_data = &lpc32xx_clcd_data,
157 },
158 .res = {
159 .start = LPC32XX_LCD_BASE,
160 .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
161 .flags = IORESOURCE_MEM,
162 },
163 .dma_mask = ~0,
164 .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
165 };
166
167 /*
168 * AMBA SSP (SPI)
169 */
170 static void phy3250_spi_cs_set(u32 control)
171 {
172 gpio_set_value(SPI0_CS_GPIO, (int) control);
173 }
174
175 static struct pl022_config_chip spi0_chip_info = {
176 .com_mode = INTERRUPT_TRANSFER,
177 .iface = SSP_INTERFACE_MOTOROLA_SPI,
178 .hierarchy = SSP_MASTER,
179 .slave_tx_disable = 0,
180 .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
181 .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
182 .ctrl_len = SSP_BITS_8,
183 .wait_state = SSP_MWIRE_WAIT_ZERO,
184 .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
185 .cs_control = phy3250_spi_cs_set,
186 };
187
188 static struct pl022_ssp_controller lpc32xx_ssp0_data = {
189 .bus_id = 0,
190 .num_chipselect = 1,
191 .enable_dma = 0,
192 };
193
194 static struct amba_device lpc32xx_ssp0_device = {
195 .dev = {
196 .coherent_dma_mask = ~0,
197 .init_name = "dev:ssp0",
198 .platform_data = &lpc32xx_ssp0_data,
199 },
200 .res = {
201 .start = LPC32XX_SSP0_BASE,
202 .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
203 .flags = IORESOURCE_MEM,
204 },
205 .dma_mask = ~0,
206 .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
207 };
208
209 /* AT25 driver registration */
210 static int __init phy3250_spi_board_register(void)
211 {
212 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
213 static struct spi_board_info info[] = {
214 {
215 .modalias = "spidev",
216 .max_speed_hz = 5000000,
217 .bus_num = 0,
218 .chip_select = 0,
219 .controller_data = &spi0_chip_info,
220 },
221 };
222
223 #else
224 static struct spi_eeprom eeprom = {
225 .name = "at25256a",
226 .byte_len = 0x8000,
227 .page_size = 64,
228 .flags = EE_ADDR2,
229 };
230
231 static struct spi_board_info info[] = {
232 {
233 .modalias = "at25",
234 .max_speed_hz = 5000000,
235 .bus_num = 0,
236 .chip_select = 0,
237 .mode = SPI_MODE_0,
238 .platform_data = &eeprom,
239 .controller_data = &spi0_chip_info,
240 },
241 };
242 #endif
243 return spi_register_board_info(info, ARRAY_SIZE(info));
244 }
245 arch_initcall(phy3250_spi_board_register);
246
247 static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
248 {
249 I2C_BOARD_INFO("pcf8563", 0x51),
250 },
251 };
252
253 static struct gpio_led phy_leds[] = {
254 {
255 .name = "led0",
256 .gpio = LED_GPIO,
257 .active_low = 1,
258 .default_trigger = "heartbeat",
259 },
260 };
261
262 static struct gpio_led_platform_data led_data = {
263 .leds = phy_leds,
264 .num_leds = ARRAY_SIZE(phy_leds),
265 };
266
267 static struct platform_device lpc32xx_gpio_led_device = {
268 .name = "leds-gpio",
269 .id = -1,
270 .dev.platform_data = &led_data,
271 };
272
273 static struct platform_device *phy3250_devs[] __initdata = {
274 &lpc32xx_i2c0_device,
275 &lpc32xx_i2c1_device,
276 &lpc32xx_i2c2_device,
277 &lpc32xx_watchdog_device,
278 &lpc32xx_gpio_led_device,
279 };
280
281 static struct amba_device *amba_devs[] __initdata = {
282 &lpc32xx_clcd_device,
283 &lpc32xx_ssp0_device,
284 };
285
286 /*
287 * Board specific functions
288 */
289 static void __init phy3250_board_init(void)
290 {
291 u32 tmp;
292 int i;
293
294 lpc32xx_gpio_init();
295
296 /* Register GPIOs used on this board */
297 if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
298 printk(KERN_ERR "Error requesting gpio %u",
299 SPI0_CS_GPIO);
300 else if (gpio_direction_output(SPI0_CS_GPIO, 1))
301 printk(KERN_ERR "Error setting gpio %u to output",
302 SPI0_CS_GPIO);
303
304 /* Setup network interface for RMII mode */
305 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
306 tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
307 tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
308 __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
309
310 /* Setup SLC NAND controller muxing */
311 __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
312 LPC32XX_CLKPWR_NAND_CLK_CTRL);
313
314 /* Setup LCD muxing to RGB565 */
315 tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
316 ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
317 LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
318 tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
319 __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
320
321 /* Set up I2C pull levels */
322 tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
323 tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
324 LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
325 __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
326
327 /* Disable IrDA pulsing support on UART6 */
328 tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
329 tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
330 __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
331
332 /* Enable DMA for I2S1 channel */
333 tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
334 tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
335 __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
336
337 lpc32xx_serial_init();
338
339 /*
340 * AMBA peripheral clocks need to be enabled prior to AMBA device
341 * detection or a data fault will occur, so enable the clocks
342 * here. However, we don't want to enable them if the peripheral
343 * isn't included in the image
344 */
345 #ifdef CONFIG_FB_ARMCLCD
346 tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
347 __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
348 LPC32XX_CLKPWR_LCDCLK_CTRL);
349 #endif
350 #ifdef CONFIG_SPI_PL022
351 tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
352 __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
353 LPC32XX_CLKPWR_SSP_CLK_CTRL);
354 #endif
355
356 platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
357 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
358 struct amba_device *d = amba_devs[i];
359 amba_device_register(d, &iomem_resource);
360 }
361
362 /* Test clock needed for UDA1380 initial init */
363 __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
364 LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
365 LPC32XX_CLKPWR_TEST_CLK_SEL);
366
367 i2c_register_board_info(0, phy3250_i2c_board_info,
368 ARRAY_SIZE(phy3250_i2c_board_info));
369 }
370
371 static int __init lpc32xx_display_uid(void)
372 {
373 u32 uid[4];
374
375 lpc32xx_get_uid(uid);
376
377 printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
378 uid[3], uid[2], uid[1], uid[0]);
379
380 return 1;
381 }
382 arch_initcall(lpc32xx_display_uid);
383
384 MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
385 /* Maintainer: Kevin Wells, NXP Semiconductors */
386 .atag_offset = 0x100,
387 .map_io = lpc32xx_map_io,
388 .init_irq = lpc32xx_init_irq,
389 .timer = &lpc32xx_timer,
390 .init_machine = phy3250_board_init,
391 MACHINE_END
linux-next