1 /* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
3 * Copyright 2008 Openmoko, Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 * Copyright 2009 Kwangwoo Lee
8 * Kwangwoo Lee <kwangwoo.lee@gmail.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include <linux/kernel.h>
17 #include <linux/types.h>
18 #include <linux/interrupt.h>
19 #include <linux/list.h>
20 #include <linux/timer.h>
21 #include <linux/init.h>
22 #include <linux/serial_core.h>
23 #include <linux/platform_device.h>
25 #include <linux/i2c.h>
27 #include <linux/gpio.h>
28 #include <linux/delay.h>
29 #include <linux/dm9000.h>
31 #include <video/platform_lcd.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/map.h>
35 #include <asm/mach/irq.h>
37 #include <mach/hardware.h>
41 #include <asm/mach-types.h>
43 #include <plat/regs-serial.h>
46 #include <plat/regs-fb-v4.h>
48 #include <mach/s3c6410.h>
49 #include <plat/clock.h>
50 #include <plat/devs.h>
52 #include <mach/regs-gpio.h>
53 #include <mach/regs-modem.h>
56 #define ANW6410_PA_DM9000 (0x18000000)
58 /* A hardware buffer to control external devices is mapped at 0x30000000.
59 * It can not be read. So current status must be kept in anw6410_extdev_status.
61 #define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
62 #define ANW6410_PA_EXTDEV (0x30000000)
64 #define ANW6410_EN_DM9000 (1<<11)
65 #define ANW6410_EN_LCD (1<<14)
67 static __u32 anw6410_extdev_status
;
69 static struct s3c2410_uartcfg anw6410_uartcfgs
[] __initdata
= {
86 /* framebuffer and LCD setup. */
87 static void __init
anw6410_lcd_mode_set(void)
91 /* set the LCD type */
92 tmp
= __raw_readl(S3C64XX_SPCON
);
93 tmp
&= ~S3C64XX_SPCON_LCD_SEL_MASK
;
94 tmp
|= S3C64XX_SPCON_LCD_SEL_RGB
;
95 __raw_writel(tmp
, S3C64XX_SPCON
);
97 /* remove the LCD bypass */
98 tmp
= __raw_readl(S3C64XX_MODEM_MIFPCON
);
99 tmp
&= ~MIFPCON_LCD_BYPASS
;
100 __raw_writel(tmp
, S3C64XX_MODEM_MIFPCON
);
103 /* GPF1 = LCD panel power
104 * GPF4 = LCD backlight control
106 static void anw6410_lcd_power_set(struct plat_lcd_data
*pd
,
110 anw6410_extdev_status
|= (ANW6410_EN_LCD
<< 16);
111 __raw_writel(anw6410_extdev_status
, ANW6410_VA_EXTDEV
);
113 gpio_direction_output(S3C64XX_GPF(1), 1);
114 gpio_direction_output(S3C64XX_GPF(4), 1);
116 anw6410_extdev_status
&= ~(ANW6410_EN_LCD
<< 16);
117 __raw_writel(anw6410_extdev_status
, ANW6410_VA_EXTDEV
);
119 gpio_direction_output(S3C64XX_GPF(1), 0);
120 gpio_direction_output(S3C64XX_GPF(4), 0);
124 static struct plat_lcd_data anw6410_lcd_power_data
= {
125 .set_power
= anw6410_lcd_power_set
,
128 static struct platform_device anw6410_lcd_powerdev
= {
129 .name
= "platform-lcd",
130 .dev
.parent
= &s3c_device_fb
.dev
,
131 .dev
.platform_data
= &anw6410_lcd_power_data
,
134 static struct s3c_fb_pd_win anw6410_fb_win0
= {
135 /* this is to ensure we use win0 */
150 /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
151 static struct s3c_fb_platdata anw6410_lcd_pdata __initdata
= {
152 .setup_gpio
= s3c64xx_fb_gpio_setup_24bpp
,
153 .win
[0] = &anw6410_fb_win0
,
154 .vidcon0
= VIDCON0_VIDOUT_RGB
| VIDCON0_PNRMODE_RGB
,
155 .vidcon1
= VIDCON1_INV_HSYNC
| VIDCON1_INV_VSYNC
,
158 /* DM9000AEP 10/100 ethernet controller */
159 static void __init
anw6410_dm9000_enable(void)
161 anw6410_extdev_status
|= (ANW6410_EN_DM9000
<< 16);
162 __raw_writel(anw6410_extdev_status
, ANW6410_VA_EXTDEV
);
165 static struct resource anw6410_dm9000_resource
[] = {
167 .start
= ANW6410_PA_DM9000
,
168 .end
= ANW6410_PA_DM9000
+ 3,
169 .flags
= IORESOURCE_MEM
,
172 .start
= ANW6410_PA_DM9000
+ 4,
173 .end
= ANW6410_PA_DM9000
+ 4 + 500,
174 .flags
= IORESOURCE_MEM
,
177 .start
= IRQ_EINT(15),
179 .flags
= IORESOURCE_IRQ
| IRQF_TRIGGER_HIGH
,
183 static struct dm9000_plat_data anw6410_dm9000_pdata
= {
184 .flags
= (DM9000_PLATF_16BITONLY
| DM9000_PLATF_NO_EEPROM
),
185 /* dev_addr can be set to provide hwaddr. */
188 static struct platform_device anw6410_device_eth
= {
191 .num_resources
= ARRAY_SIZE(anw6410_dm9000_resource
),
192 .resource
= anw6410_dm9000_resource
,
194 .platform_data
= &anw6410_dm9000_pdata
,
198 static struct map_desc anw6410_iodesc
[] __initdata
= {
200 .virtual = (unsigned long)ANW6410_VA_EXTDEV
,
201 .pfn
= __phys_to_pfn(ANW6410_PA_EXTDEV
),
207 static struct platform_device
*anw6410_devices
[] __initdata
= {
209 &anw6410_lcd_powerdev
,
213 static void __init
anw6410_map_io(void)
215 s3c64xx_init_io(anw6410_iodesc
, ARRAY_SIZE(anw6410_iodesc
));
216 s3c24xx_init_clocks(12000000);
217 s3c24xx_init_uarts(anw6410_uartcfgs
, ARRAY_SIZE(anw6410_uartcfgs
));
219 anw6410_lcd_mode_set();
222 static void __init
anw6410_machine_init(void)
224 s3c_fb_set_platdata(&anw6410_lcd_pdata
);
226 gpio_request(S3C64XX_GPF(1), "panel power");
227 gpio_request(S3C64XX_GPF(4), "LCD backlight");
229 anw6410_dm9000_enable();
231 platform_add_devices(anw6410_devices
, ARRAY_SIZE(anw6410_devices
));
234 MACHINE_START(ANW6410
, "A&W6410")
235 /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
236 .atag_offset
= 0x100,
238 .init_irq
= s3c6410_init_irq
,
239 .map_io
= anw6410_map_io
,
240 .init_machine
= anw6410_machine_init
,
241 .timer
= &s3c24xx_timer
,