2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP environment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
33 #include <linux/init.h>
34 #include <asm/uaccess.h>
35 #include <linux/slab.h>
36 #include <linux/list.h>
37 #include <linux/vmalloc.h>
38 #include <linux/elf.h>
39 #include <linux/seq_file.h>
40 #include <linux/syscalls.h>
41 #include <linux/moduleloader.h>
42 #include <linux/interrupt.h>
43 #include <linux/poll.h>
44 #include <linux/bootmem.h>
45 #include <asm/mipsregs.h>
46 #include <asm/mipsmtregs.h>
47 #include <asm/cacheflush.h>
48 #include <linux/atomic.h>
50 #include <asm/mips_mt.h>
51 #include <asm/processor.h>
52 #include <asm/system.h>
56 typedef void *vpe_handle
;
58 #ifndef ARCH_SHF_SMALL
59 #define ARCH_SHF_SMALL 0
62 /* If this is set, the section belongs in the init part of the module */
63 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
66 * The number of TCs and VPEs physically available on the core
68 static int hw_tcs
, hw_vpes
;
69 static char module_name
[] = "vpe";
71 static const int minor
= 1; /* fixed for now */
73 #ifdef CONFIG_MIPS_APSP_KSPD
74 static struct kspd_notifications kspd_events
;
75 static int kspd_events_reqd
;
78 /* grab the likely amount of memory we will need. */
79 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
80 #define P_SIZE (2 * 1024 * 1024)
82 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
83 #define P_SIZE (256 * 1024)
86 extern unsigned long physical_memsize
;
89 #define VPE_PATH_MAX 256
105 enum vpe_state state
;
107 /* (device) minor associated with this vpe */
110 /* elfloader stuff */
115 unsigned int uid
, gid
;
116 char cwd
[VPE_PATH_MAX
];
118 unsigned long __start
;
120 /* tc's associated with this vpe */
123 /* The list of vpe's */
124 struct list_head list
;
126 /* shared symbol address */
129 /* the list of who wants to know when something major happens */
130 struct list_head notify
;
139 struct vpe
*pvpe
; /* parent VPE */
140 struct list_head tc
; /* The list of TC's with this VPE */
141 struct list_head list
; /* The global list of tc's */
145 spinlock_t vpe_list_lock
;
146 struct list_head vpe_list
; /* Virtual processing elements */
147 spinlock_t tc_list_lock
;
148 struct list_head tc_list
; /* Thread contexts */
150 .vpe_list_lock
= __SPIN_LOCK_UNLOCKED(vpe_list_lock
),
151 .vpe_list
= LIST_HEAD_INIT(vpecontrol
.vpe_list
),
152 .tc_list_lock
= __SPIN_LOCK_UNLOCKED(tc_list_lock
),
153 .tc_list
= LIST_HEAD_INIT(vpecontrol
.tc_list
)
156 static void release_progmem(void *ptr
);
158 /* get the vpe associated with this minor */
159 static struct vpe
*get_vpe(int minor
)
167 spin_lock(&vpecontrol
.vpe_list_lock
);
168 list_for_each_entry(v
, &vpecontrol
.vpe_list
, list
) {
169 if (v
->minor
== minor
) {
174 spin_unlock(&vpecontrol
.vpe_list_lock
);
179 /* get the vpe associated with this minor */
180 static struct tc
*get_tc(int index
)
185 spin_lock(&vpecontrol
.tc_list_lock
);
186 list_for_each_entry(t
, &vpecontrol
.tc_list
, list
) {
187 if (t
->index
== index
) {
192 spin_unlock(&vpecontrol
.tc_list_lock
);
197 /* allocate a vpe and associate it with this minor (or index) */
198 static struct vpe
*alloc_vpe(int minor
)
202 if ((v
= kzalloc(sizeof(struct vpe
), GFP_KERNEL
)) == NULL
)
205 INIT_LIST_HEAD(&v
->tc
);
206 spin_lock(&vpecontrol
.vpe_list_lock
);
207 list_add_tail(&v
->list
, &vpecontrol
.vpe_list
);
208 spin_unlock(&vpecontrol
.vpe_list_lock
);
210 INIT_LIST_HEAD(&v
->notify
);
216 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
217 static struct tc
*alloc_tc(int index
)
221 if ((tc
= kzalloc(sizeof(struct tc
), GFP_KERNEL
)) == NULL
)
224 INIT_LIST_HEAD(&tc
->tc
);
227 spin_lock(&vpecontrol
.tc_list_lock
);
228 list_add_tail(&tc
->list
, &vpecontrol
.tc_list
);
229 spin_unlock(&vpecontrol
.tc_list_lock
);
235 /* clean up and free everything */
236 static void release_vpe(struct vpe
*v
)
244 static void __maybe_unused
dump_mtregs(void)
248 val
= read_c0_config3();
249 printk("config3 0x%lx MT %ld\n", val
,
250 (val
& CONFIG3_MT
) >> CONFIG3_MT_SHIFT
);
252 val
= read_c0_mvpcontrol();
253 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val
,
254 (val
& MVPCONTROL_STLB
) >> MVPCONTROL_STLB_SHIFT
,
255 (val
& MVPCONTROL_VPC
) >> MVPCONTROL_VPC_SHIFT
,
256 (val
& MVPCONTROL_EVP
));
258 val
= read_c0_mvpconf0();
259 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val
,
260 (val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
,
261 val
& MVPCONF0_PTC
, (val
& MVPCONF0_M
) >> MVPCONF0_M_SHIFT
);
264 /* Find some VPE program space */
265 static void *alloc_progmem(unsigned long len
)
269 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
271 * This means you must tell Linux to use less memory than you
272 * physically have, for example by passing a mem= boot argument.
274 addr
= pfn_to_kaddr(max_low_pfn
);
275 memset(addr
, 0, len
);
277 /* simple grab some mem for now */
278 addr
= kzalloc(len
, GFP_KERNEL
);
284 static void release_progmem(void *ptr
)
286 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
291 /* Update size with this section: return offset. */
292 static long get_offset(unsigned long *size
, Elf_Shdr
* sechdr
)
296 ret
= ALIGN(*size
, sechdr
->sh_addralign
? : 1);
297 *size
= ret
+ sechdr
->sh_size
;
301 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
302 might -- code, read-only data, read-write data, small data. Tally
303 sizes, and place the offsets into sh_entsize fields: high bit means it
305 static void layout_sections(struct module
*mod
, const Elf_Ehdr
* hdr
,
306 Elf_Shdr
* sechdrs
, const char *secstrings
)
308 static unsigned long const masks
[][2] = {
309 /* NOTE: all executable code must be the first section
310 * in this array; otherwise modify the text_size
311 * finder in the two loops below */
312 {SHF_EXECINSTR
| SHF_ALLOC
, ARCH_SHF_SMALL
},
313 {SHF_ALLOC
, SHF_WRITE
| ARCH_SHF_SMALL
},
314 {SHF_WRITE
| SHF_ALLOC
, ARCH_SHF_SMALL
},
315 {ARCH_SHF_SMALL
| SHF_ALLOC
, 0}
319 for (i
= 0; i
< hdr
->e_shnum
; i
++)
320 sechdrs
[i
].sh_entsize
= ~0UL;
322 for (m
= 0; m
< ARRAY_SIZE(masks
); ++m
) {
323 for (i
= 0; i
< hdr
->e_shnum
; ++i
) {
324 Elf_Shdr
*s
= &sechdrs
[i
];
326 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
327 if ((s
->sh_flags
& masks
[m
][0]) != masks
[m
][0]
328 || (s
->sh_flags
& masks
[m
][1])
329 || s
->sh_entsize
!= ~0UL)
332 get_offset((unsigned long *)&mod
->core_size
, s
);
336 mod
->core_text_size
= mod
->core_size
;
342 /* from module-elf32.c, but subverted a little */
345 struct mips_hi16
*next
;
350 static struct mips_hi16
*mips_hi16_list
;
351 static unsigned int gp_offs
, gp_addr
;
353 static int apply_r_mips_none(struct module
*me
, uint32_t *location
,
359 static int apply_r_mips_gprel16(struct module
*me
, uint32_t *location
,
364 if( !(*location
& 0xffff) ) {
365 rel
= (int)v
- gp_addr
;
368 /* .sbss + gp(relative) + offset */
370 rel
= (int)(short)((int)v
+ gp_offs
+
371 (int)(short)(*location
& 0xffff) - gp_addr
);
374 if( (rel
> 32768) || (rel
< -32768) ) {
375 printk(KERN_DEBUG
"VPE loader: apply_r_mips_gprel16: "
376 "relative address 0x%x out of range of gp register\n",
381 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
386 static int apply_r_mips_pc16(struct module
*me
, uint32_t *location
,
390 rel
= (((unsigned int)v
- (unsigned int)location
));
391 rel
>>= 2; // because the offset is in _instructions_ not bytes.
392 rel
-= 1; // and one instruction less due to the branch delay slot.
394 if( (rel
> 32768) || (rel
< -32768) ) {
395 printk(KERN_DEBUG
"VPE loader: "
396 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel
);
400 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
405 static int apply_r_mips_32(struct module
*me
, uint32_t *location
,
413 static int apply_r_mips_26(struct module
*me
, uint32_t *location
,
417 printk(KERN_DEBUG
"VPE loader: apply_r_mips_26 "
418 " unaligned relocation\n");
423 * Not desperately convinced this is a good check of an overflow condition
424 * anyway. But it gets in the way of handling undefined weak symbols which
425 * we want to set to zero.
426 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
428 * "module %s: relocation overflow\n",
434 *location
= (*location
& ~0x03ffffff) |
435 ((*location
+ (v
>> 2)) & 0x03ffffff);
439 static int apply_r_mips_hi16(struct module
*me
, uint32_t *location
,
445 * We cannot relocate this one now because we don't know the value of
446 * the carry we need to add. Save the information, and let LO16 do the
449 n
= kmalloc(sizeof *n
, GFP_KERNEL
);
455 n
->next
= mips_hi16_list
;
461 static int apply_r_mips_lo16(struct module
*me
, uint32_t *location
,
464 unsigned long insnlo
= *location
;
465 Elf32_Addr val
, vallo
;
466 struct mips_hi16
*l
, *next
;
468 /* Sign extend the addend we extract from the lo insn. */
469 vallo
= ((insnlo
& 0xffff) ^ 0x8000) - 0x8000;
471 if (mips_hi16_list
!= NULL
) {
478 * The value for the HI16 had best be the same.
481 printk(KERN_DEBUG
"VPE loader: "
482 "apply_r_mips_lo16/hi16: \t"
483 "inconsistent value information\n");
488 * Do the HI16 relocation. Note that we actually don't
489 * need to know anything about the LO16 itself, except
490 * where to find the low 16 bits of the addend needed
494 val
= ((insn
& 0xffff) << 16) + vallo
;
498 * Account for the sign extension that will happen in
501 val
= ((val
>> 16) + ((val
& 0x8000) != 0)) & 0xffff;
503 insn
= (insn
& ~0xffff) | val
;
511 mips_hi16_list
= NULL
;
515 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
518 insnlo
= (insnlo
& ~0xffff) | (val
& 0xffff);
529 mips_hi16_list
= NULL
;
534 static int (*reloc_handlers
[]) (struct module
*me
, uint32_t *location
,
536 [R_MIPS_NONE
] = apply_r_mips_none
,
537 [R_MIPS_32
] = apply_r_mips_32
,
538 [R_MIPS_26
] = apply_r_mips_26
,
539 [R_MIPS_HI16
] = apply_r_mips_hi16
,
540 [R_MIPS_LO16
] = apply_r_mips_lo16
,
541 [R_MIPS_GPREL16
] = apply_r_mips_gprel16
,
542 [R_MIPS_PC16
] = apply_r_mips_pc16
545 static char *rstrs
[] = {
546 [R_MIPS_NONE
] = "MIPS_NONE",
547 [R_MIPS_32
] = "MIPS_32",
548 [R_MIPS_26
] = "MIPS_26",
549 [R_MIPS_HI16
] = "MIPS_HI16",
550 [R_MIPS_LO16
] = "MIPS_LO16",
551 [R_MIPS_GPREL16
] = "MIPS_GPREL16",
552 [R_MIPS_PC16
] = "MIPS_PC16"
555 static int apply_relocations(Elf32_Shdr
*sechdrs
,
557 unsigned int symindex
,
561 Elf32_Rel
*rel
= (void *) sechdrs
[relsec
].sh_addr
;
568 for (i
= 0; i
< sechdrs
[relsec
].sh_size
/ sizeof(*rel
); i
++) {
569 Elf32_Word r_info
= rel
[i
].r_info
;
571 /* This is where to make the change */
572 location
= (void *)sechdrs
[sechdrs
[relsec
].sh_info
].sh_addr
574 /* This is the symbol it is referring to */
575 sym
= (Elf32_Sym
*)sechdrs
[symindex
].sh_addr
576 + ELF32_R_SYM(r_info
);
578 if (!sym
->st_value
) {
579 printk(KERN_DEBUG
"%s: undefined weak symbol %s\n",
580 me
->name
, strtab
+ sym
->st_name
);
581 /* just print the warning, dont barf */
586 res
= reloc_handlers
[ELF32_R_TYPE(r_info
)](me
, location
, v
);
588 char *r
= rstrs
[ELF32_R_TYPE(r_info
)];
589 printk(KERN_WARNING
"VPE loader: .text+0x%x "
590 "relocation type %s for symbol \"%s\" failed\n",
591 rel
[i
].r_offset
, r
? r
: "UNKNOWN",
592 strtab
+ sym
->st_name
);
600 static inline void save_gp_address(unsigned int secbase
, unsigned int rel
)
602 gp_addr
= secbase
+ rel
;
603 gp_offs
= gp_addr
- (secbase
& 0xffff0000);
605 /* end module-elf32.c */
609 /* Change all symbols so that sh_value encodes the pointer directly. */
610 static void simplify_symbols(Elf_Shdr
* sechdrs
,
611 unsigned int symindex
,
613 const char *secstrings
,
614 unsigned int nsecs
, struct module
*mod
)
616 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
617 unsigned long secbase
, bssbase
= 0;
618 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
621 /* find the .bss section for COMMON symbols */
622 for (i
= 0; i
< nsecs
; i
++) {
623 if (strncmp(secstrings
+ sechdrs
[i
].sh_name
, ".bss", 4) == 0) {
624 bssbase
= sechdrs
[i
].sh_addr
;
629 for (i
= 1; i
< n
; i
++) {
630 switch (sym
[i
].st_shndx
) {
632 /* Allocate space for the symbol in the .bss section.
633 st_value is currently size.
634 We want it to have the address of the symbol. */
636 size
= sym
[i
].st_value
;
637 sym
[i
].st_value
= bssbase
;
643 /* Don't need to do anything */
650 case SHN_MIPS_SCOMMON
:
651 printk(KERN_DEBUG
"simplify_symbols: ignoring SHN_MIPS_SCOMMON "
652 "symbol <%s> st_shndx %d\n", strtab
+ sym
[i
].st_name
,
658 secbase
= sechdrs
[sym
[i
].st_shndx
].sh_addr
;
660 if (strncmp(strtab
+ sym
[i
].st_name
, "_gp", 3) == 0) {
661 save_gp_address(secbase
, sym
[i
].st_value
);
664 sym
[i
].st_value
+= secbase
;
670 #ifdef DEBUG_ELFLOADER
671 static void dump_elfsymbols(Elf_Shdr
* sechdrs
, unsigned int symindex
,
672 const char *strtab
, struct module
*mod
)
674 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
675 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
677 printk(KERN_DEBUG
"dump_elfsymbols: n %d\n", n
);
678 for (i
= 1; i
< n
; i
++) {
679 printk(KERN_DEBUG
" i %d name <%s> 0x%x\n", i
,
680 strtab
+ sym
[i
].st_name
, sym
[i
].st_value
);
685 /* We are prepared so configure and start the VPE... */
686 static int vpe_run(struct vpe
* v
)
688 unsigned long flags
, val
, dmt_flag
;
689 struct vpe_notifications
*n
;
690 unsigned int vpeflags
;
693 /* check we are the Master VPE */
694 local_irq_save(flags
);
695 val
= read_c0_vpeconf0();
696 if (!(val
& VPECONF0_MVP
)) {
698 "VPE loader: only Master VPE's are allowed to configure MT\n");
699 local_irq_restore(flags
);
707 if (!list_empty(&v
->tc
)) {
708 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) == NULL
) {
711 local_irq_restore(flags
);
714 "VPE loader: TC %d is already in use.\n",
721 local_irq_restore(flags
);
724 "VPE loader: No TC's associated with VPE %d\n",
730 /* Put MVPE's into 'configuration state' */
731 set_c0_mvpcontrol(MVPCONTROL_VPC
);
735 /* should check it is halted, and not activated */
736 if ((read_tc_c0_tcstatus() & TCSTATUS_A
) || !(read_tc_c0_tchalt() & TCHALT_H
)) {
739 local_irq_restore(flags
);
741 printk(KERN_WARNING
"VPE loader: TC %d is already active!\n",
747 /* Write the address we want it to start running from in the TCPC register. */
748 write_tc_c0_tcrestart((unsigned long)v
->__start
);
749 write_tc_c0_tccontext((unsigned long)0);
752 * Mark the TC as activated, not interrupt exempt and not dynamically
755 val
= read_tc_c0_tcstatus();
756 val
= (val
& ~(TCSTATUS_DA
| TCSTATUS_IXMT
)) | TCSTATUS_A
;
757 write_tc_c0_tcstatus(val
);
759 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H
);
762 * The sde-kit passes 'memsize' to __start in $a3, so set something
763 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
764 * DFLT_HEAP_SIZE when you compile your program
767 mttgpr(7, physical_memsize
);
771 * bind the TC to VPE 1 as late as possible so we only have the final
772 * VPE registers to set up, and so an EJTAG probe can trigger on it
774 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE
) | 1);
776 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA
));
778 back_to_back_c0_hazard();
780 /* Set up the XTC bit in vpeconf0 to point at our tc */
781 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC
))
782 | (t
->index
<< VPECONF0_XTC_SHIFT
));
784 back_to_back_c0_hazard();
786 /* enable this VPE */
787 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA
);
789 /* clear out any left overs from a previous program */
790 write_vpe_c0_status(0);
791 write_vpe_c0_cause(0);
793 /* take system out of configuration state */
794 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
797 * SMTC/SMVP kernels manage VPE enable independently,
798 * but uniprocessor kernels need to turn it on, even
799 * if that wasn't the pre-dvpe() state.
807 local_irq_restore(flags
);
809 list_for_each_entry(n
, &v
->notify
, list
)
815 static int find_vpe_symbols(struct vpe
* v
, Elf_Shdr
* sechdrs
,
816 unsigned int symindex
, const char *strtab
,
819 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
820 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
822 for (i
= 1; i
< n
; i
++) {
823 if (strcmp(strtab
+ sym
[i
].st_name
, "__start") == 0) {
824 v
->__start
= sym
[i
].st_value
;
827 if (strcmp(strtab
+ sym
[i
].st_name
, "vpe_shared") == 0) {
828 v
->shared_ptr
= (void *)sym
[i
].st_value
;
832 if ( (v
->__start
== 0) || (v
->shared_ptr
== NULL
))
839 * Allocates a VPE with some program code space(the load address), copies the
840 * contents of the program (p)buffer performing relocatations/etc, free's it
843 static int vpe_elfload(struct vpe
* v
)
848 char *secstrings
, *strtab
= NULL
;
849 unsigned int len
, i
, symindex
= 0, strindex
= 0, relocate
= 0;
850 struct module mod
; // so we can re-use the relocations code
852 memset(&mod
, 0, sizeof(struct module
));
853 strcpy(mod
.name
, "VPE loader");
855 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
858 /* Sanity checks against insmoding binaries or wrong arch,
860 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) != 0
861 || (hdr
->e_type
!= ET_REL
&& hdr
->e_type
!= ET_EXEC
)
862 || !elf_check_arch(hdr
)
863 || hdr
->e_shentsize
!= sizeof(*sechdrs
)) {
865 "VPE loader: program wrong arch or weird elf version\n");
870 if (hdr
->e_type
== ET_REL
)
873 if (len
< hdr
->e_shoff
+ hdr
->e_shnum
* sizeof(Elf_Shdr
)) {
874 printk(KERN_ERR
"VPE loader: program length %u truncated\n",
880 /* Convenience variables */
881 sechdrs
= (void *)hdr
+ hdr
->e_shoff
;
882 secstrings
= (void *)hdr
+ sechdrs
[hdr
->e_shstrndx
].sh_offset
;
883 sechdrs
[0].sh_addr
= 0;
885 /* And these should exist, but gcc whinges if we don't init them */
886 symindex
= strindex
= 0;
889 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
890 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
891 && len
< sechdrs
[i
].sh_offset
+ sechdrs
[i
].sh_size
) {
892 printk(KERN_ERR
"VPE program length %u truncated\n",
897 /* Mark all sections sh_addr with their address in the
899 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
901 /* Internal symbols and strings. */
902 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
904 strindex
= sechdrs
[i
].sh_link
;
905 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
908 layout_sections(&mod
, hdr
, sechdrs
, secstrings
);
911 v
->load_addr
= alloc_progmem(mod
.core_size
);
915 pr_info("VPE loader: loading to %p\n", v
->load_addr
);
918 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
921 if (!(sechdrs
[i
].sh_flags
& SHF_ALLOC
))
924 dest
= v
->load_addr
+ sechdrs
[i
].sh_entsize
;
926 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
)
927 memcpy(dest
, (void *)sechdrs
[i
].sh_addr
,
929 /* Update sh_addr to point to copy in image. */
930 sechdrs
[i
].sh_addr
= (unsigned long)dest
;
932 printk(KERN_DEBUG
" section sh_name %s sh_addr 0x%x\n",
933 secstrings
+ sechdrs
[i
].sh_name
, sechdrs
[i
].sh_addr
);
936 /* Fix up syms, so that st_value is a pointer to location. */
937 simplify_symbols(sechdrs
, symindex
, strtab
, secstrings
,
940 /* Now do relocations. */
941 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
942 const char *strtab
= (char *)sechdrs
[strindex
].sh_addr
;
943 unsigned int info
= sechdrs
[i
].sh_info
;
945 /* Not a valid relocation section? */
946 if (info
>= hdr
->e_shnum
)
949 /* Don't bother with non-allocated sections */
950 if (!(sechdrs
[info
].sh_flags
& SHF_ALLOC
))
953 if (sechdrs
[i
].sh_type
== SHT_REL
)
954 err
= apply_relocations(sechdrs
, strtab
, symindex
, i
,
956 else if (sechdrs
[i
].sh_type
== SHT_RELA
)
957 err
= apply_relocate_add(sechdrs
, strtab
, symindex
, i
,
964 struct elf_phdr
*phdr
= (struct elf_phdr
*) ((char *)hdr
+ hdr
->e_phoff
);
966 for (i
= 0; i
< hdr
->e_phnum
; i
++) {
967 if (phdr
->p_type
== PT_LOAD
) {
968 memcpy((void *)phdr
->p_paddr
,
969 (char *)hdr
+ phdr
->p_offset
,
971 memset((void *)phdr
->p_paddr
+ phdr
->p_filesz
,
972 0, phdr
->p_memsz
- phdr
->p_filesz
);
977 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
978 /* Internal symbols and strings. */
979 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
981 strindex
= sechdrs
[i
].sh_link
;
982 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
984 /* mark the symtab's address for when we try to find the
986 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
991 /* make sure it's physically written out */
992 flush_icache_range((unsigned long)v
->load_addr
,
993 (unsigned long)v
->load_addr
+ v
->len
);
995 if ((find_vpe_symbols(v
, sechdrs
, symindex
, strtab
, &mod
)) < 0) {
996 if (v
->__start
== 0) {
997 printk(KERN_WARNING
"VPE loader: program does not contain "
998 "a __start symbol\n");
1002 if (v
->shared_ptr
== NULL
)
1003 printk(KERN_WARNING
"VPE loader: "
1004 "program does not contain vpe_shared symbol.\n"
1005 " Unable to use AMVP (AP/SP) facilities.\n");
1008 printk(" elf loaded\n");
1012 static void cleanup_tc(struct tc
*tc
)
1014 unsigned long flags
;
1015 unsigned int mtflags
, vpflags
;
1018 local_irq_save(flags
);
1021 /* Put MVPE's into 'configuration state' */
1022 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1025 tmp
= read_tc_c0_tcstatus();
1027 /* mark not allocated and not dynamically allocatable */
1028 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1029 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1030 write_tc_c0_tcstatus(tmp
);
1032 write_tc_c0_tchalt(TCHALT_H
);
1035 /* bind it to anything other than VPE1 */
1036 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1038 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1041 local_irq_restore(flags
);
1044 static int getcwd(char *buff
, int size
)
1046 mm_segment_t old_fs
;
1052 ret
= sys_getcwd(buff
, size
);
1059 /* checks VPE is unused and gets ready to load program */
1060 static int vpe_open(struct inode
*inode
, struct file
*filp
)
1062 enum vpe_state state
;
1063 struct vpe_notifications
*not;
1067 if (minor
!= iminor(inode
)) {
1068 /* assume only 1 device at the moment. */
1069 pr_warning("VPE loader: only vpe1 is supported\n");
1074 if ((v
= get_vpe(tclimit
)) == NULL
) {
1075 pr_warning("VPE loader: unable to get vpe\n");
1080 state
= xchg(&v
->state
, VPE_STATE_INUSE
);
1081 if (state
!= VPE_STATE_UNUSED
) {
1082 printk(KERN_DEBUG
"VPE loader: tc in use dumping regs\n");
1084 list_for_each_entry(not, &v
->notify
, list
) {
1088 release_progmem(v
->load_addr
);
1089 cleanup_tc(get_tc(tclimit
));
1092 /* this of-course trashes what was there before... */
1093 v
->pbuffer
= vmalloc(P_SIZE
);
1095 pr_warning("VPE loader: unable to allocate memory\n");
1099 v
->load_addr
= NULL
;
1102 v
->uid
= filp
->f_cred
->fsuid
;
1103 v
->gid
= filp
->f_cred
->fsgid
;
1105 #ifdef CONFIG_MIPS_APSP_KSPD
1106 /* get kspd to tell us when a syscall_exit happens */
1107 if (!kspd_events_reqd
) {
1108 kspd_notify(&kspd_events
);
1114 ret
= getcwd(v
->cwd
, VPE_PATH_MAX
);
1116 printk(KERN_WARNING
"VPE loader: open, getcwd returned %d\n", ret
);
1118 v
->shared_ptr
= NULL
;
1124 static int vpe_release(struct inode
*inode
, struct file
*filp
)
1130 v
= get_vpe(tclimit
);
1134 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
1135 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) == 0) {
1136 if (vpe_elfload(v
) >= 0) {
1139 printk(KERN_WARNING
"VPE loader: ELF load failed.\n");
1143 printk(KERN_WARNING
"VPE loader: only elf files are supported\n");
1147 /* It's good to be able to run the SP and if it chokes have a look at
1148 the /dev/rt?. But if we reset the pointer to the shared struct we
1149 lose what has happened. So perhaps if garbage is sent to the vpe
1150 device, use it as a trigger for the reset. Hopefully a nice
1151 executable will be along shortly. */
1153 v
->shared_ptr
= NULL
;
1161 static ssize_t
vpe_write(struct file
*file
, const char __user
* buffer
,
1162 size_t count
, loff_t
* ppos
)
1167 if (iminor(file
->f_path
.dentry
->d_inode
) != minor
)
1170 v
= get_vpe(tclimit
);
1174 if ((count
+ v
->len
) > v
->plen
) {
1176 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1180 count
-= copy_from_user(v
->pbuffer
+ v
->len
, buffer
, count
);
1188 static const struct file_operations vpe_fops
= {
1189 .owner
= THIS_MODULE
,
1191 .release
= vpe_release
,
1193 .llseek
= noop_llseek
,
1196 /* module wrapper entry points */
1198 vpe_handle
vpe_alloc(void)
1204 for (i
= 1; i
< MAX_VPES
; i
++) {
1205 if ((v
= get_vpe(i
)) != NULL
) {
1206 v
->state
= VPE_STATE_INUSE
;
1213 EXPORT_SYMBOL(vpe_alloc
);
1215 /* start running from here */
1216 int vpe_start(vpe_handle vpe
, unsigned long start
)
1218 struct vpe
*v
= vpe
;
1224 EXPORT_SYMBOL(vpe_start
);
1226 /* halt it for now */
1227 int vpe_stop(vpe_handle vpe
)
1229 struct vpe
*v
= vpe
;
1231 unsigned int evpe_flags
;
1233 evpe_flags
= dvpe();
1235 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) != NULL
) {
1238 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1246 EXPORT_SYMBOL(vpe_stop
);
1248 /* I've done with it thank you */
1249 int vpe_free(vpe_handle vpe
)
1251 struct vpe
*v
= vpe
;
1253 unsigned int evpe_flags
;
1255 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) == NULL
) {
1259 evpe_flags
= dvpe();
1261 /* Put MVPE's into 'configuration state' */
1262 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1265 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1268 write_tc_c0_tchalt(TCHALT_H
);
1271 /* mark the TC unallocated */
1272 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A
);
1274 v
->state
= VPE_STATE_UNUSED
;
1276 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1282 EXPORT_SYMBOL(vpe_free
);
1284 void *vpe_get_shared(int index
)
1288 if ((v
= get_vpe(index
)) == NULL
)
1291 return v
->shared_ptr
;
1294 EXPORT_SYMBOL(vpe_get_shared
);
1296 int vpe_getuid(int index
)
1300 if ((v
= get_vpe(index
)) == NULL
)
1306 EXPORT_SYMBOL(vpe_getuid
);
1308 int vpe_getgid(int index
)
1312 if ((v
= get_vpe(index
)) == NULL
)
1318 EXPORT_SYMBOL(vpe_getgid
);
1320 int vpe_notify(int index
, struct vpe_notifications
*notify
)
1324 if ((v
= get_vpe(index
)) == NULL
)
1327 list_add(¬ify
->list
, &v
->notify
);
1331 EXPORT_SYMBOL(vpe_notify
);
1333 char *vpe_getcwd(int index
)
1337 if ((v
= get_vpe(index
)) == NULL
)
1343 EXPORT_SYMBOL(vpe_getcwd
);
1345 #ifdef CONFIG_MIPS_APSP_KSPD
1346 static void kspd_sp_exit( int sp_id
)
1348 cleanup_tc(get_tc(sp_id
));
1352 static ssize_t
store_kill(struct device
*dev
, struct device_attribute
*attr
,
1353 const char *buf
, size_t len
)
1355 struct vpe
*vpe
= get_vpe(tclimit
);
1356 struct vpe_notifications
*not;
1358 list_for_each_entry(not, &vpe
->notify
, list
) {
1362 release_progmem(vpe
->load_addr
);
1363 cleanup_tc(get_tc(tclimit
));
1370 static ssize_t
show_ntcs(struct device
*cd
, struct device_attribute
*attr
,
1373 struct vpe
*vpe
= get_vpe(tclimit
);
1375 return sprintf(buf
, "%d\n", vpe
->ntcs
);
1378 static ssize_t
store_ntcs(struct device
*dev
, struct device_attribute
*attr
,
1379 const char *buf
, size_t len
)
1381 struct vpe
*vpe
= get_vpe(tclimit
);
1385 new = simple_strtoul(buf
, &endp
, 0);
1389 if (new == 0 || new > (hw_tcs
- tclimit
))
1400 static struct device_attribute vpe_class_attributes
[] = {
1401 __ATTR(kill
, S_IWUSR
, NULL
, store_kill
),
1402 __ATTR(ntcs
, S_IRUGO
| S_IWUSR
, show_ntcs
, store_ntcs
),
1406 static void vpe_device_release(struct device
*cd
)
1411 struct class vpe_class
= {
1413 .owner
= THIS_MODULE
,
1414 .dev_release
= vpe_device_release
,
1415 .dev_attrs
= vpe_class_attributes
,
1418 struct device vpe_device
;
1420 static int __init
vpe_module_init(void)
1422 unsigned int mtflags
, vpflags
;
1423 unsigned long flags
, val
;
1424 struct vpe
*v
= NULL
;
1428 if (!cpu_has_mipsmt
) {
1429 printk("VPE loader: not a MIPS MT capable processor\n");
1433 if (vpelimit
== 0) {
1434 printk(KERN_WARNING
"No VPEs reserved for AP/SP, not "
1435 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1436 "kernel argument\n");
1442 printk(KERN_WARNING
"No TCs reserved for AP/SP, not "
1443 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1444 "kernel argument\n");
1449 major
= register_chrdev(0, module_name
, &vpe_fops
);
1451 printk("VPE loader: unable to register character device\n");
1455 err
= class_register(&vpe_class
);
1457 printk(KERN_ERR
"vpe_class registration failed\n");
1461 device_initialize(&vpe_device
);
1462 vpe_device
.class = &vpe_class
,
1463 vpe_device
.parent
= NULL
,
1464 dev_set_name(&vpe_device
, "vpe1");
1465 vpe_device
.devt
= MKDEV(major
, minor
);
1466 err
= device_add(&vpe_device
);
1468 printk(KERN_ERR
"Adding vpe_device failed\n");
1472 local_irq_save(flags
);
1476 /* Put MVPE's into 'configuration state' */
1477 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1479 /* dump_mtregs(); */
1481 val
= read_c0_mvpconf0();
1482 hw_tcs
= (val
& MVPCONF0_PTC
) + 1;
1483 hw_vpes
= ((val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
) + 1;
1485 for (tc
= tclimit
; tc
< hw_tcs
; tc
++) {
1487 * Must re-enable multithreading temporarily or in case we
1488 * reschedule send IPIs or similar we might hang.
1490 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1493 local_irq_restore(flags
);
1500 local_irq_save(flags
);
1503 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1509 if ((v
= alloc_vpe(tc
)) == NULL
) {
1510 printk(KERN_WARNING
"VPE: unable to allocate VPE\n");
1515 v
->ntcs
= hw_tcs
- tclimit
;
1517 /* add the tc to the list of this vpe's tc's. */
1518 list_add(&t
->tc
, &v
->tc
);
1520 /* deactivate all but vpe0 */
1521 if (tc
>= tclimit
) {
1522 unsigned long tmp
= read_vpe_c0_vpeconf0();
1524 tmp
&= ~VPECONF0_VPA
;
1527 tmp
|= VPECONF0_MVP
;
1528 write_vpe_c0_vpeconf0(tmp
);
1531 /* disable multi-threading with TC's */
1532 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE
);
1534 if (tc
>= vpelimit
) {
1536 * Set config to be the same as vpe0,
1537 * particularly kseg0 coherency alg
1539 write_vpe_c0_config(read_c0_config());
1544 t
->pvpe
= v
; /* set the parent vpe */
1546 if (tc
>= tclimit
) {
1551 /* Any TC that is bound to VPE0 gets left as is - in case
1552 we are running SMTC on VPE0. A TC that is bound to any
1553 other VPE gets bound to VPE0, ideally I'd like to make
1554 it homeless but it doesn't appear to let me bind a TC
1555 to a non-existent VPE. Which is perfectly reasonable.
1557 The (un)bound state is visible to an EJTAG probe so may
1561 if (((tmp
= read_tc_c0_tcbind()) & TCBIND_CURVPE
)) {
1562 /* tc is bound >vpe0 */
1563 write_tc_c0_tcbind(tmp
& ~TCBIND_CURVPE
);
1565 t
->pvpe
= get_vpe(0); /* set the parent vpe */
1569 write_tc_c0_tchalt(TCHALT_H
);
1572 tmp
= read_tc_c0_tcstatus();
1574 /* mark not activated and not dynamically allocatable */
1575 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1576 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1577 write_tc_c0_tcstatus(tmp
);
1582 /* release config state */
1583 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1587 local_irq_restore(flags
);
1589 #ifdef CONFIG_MIPS_APSP_KSPD
1590 kspd_events
.kspd_sp_exit
= kspd_sp_exit
;
1595 class_unregister(&vpe_class
);
1597 unregister_chrdev(major
, module_name
);
1603 static void __exit
vpe_module_exit(void)
1607 device_del(&vpe_device
);
1608 unregister_chrdev(major
, module_name
);
1610 /* No locking needed here */
1611 list_for_each_entry_safe(v
, n
, &vpecontrol
.vpe_list
, list
) {
1612 if (v
->state
!= VPE_STATE_UNUSED
)
1617 module_init(vpe_module_init
);
1618 module_exit(vpe_module_exit
);
1619 MODULE_DESCRIPTION("MIPS VPE Loader");
1620 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1621 MODULE_LICENSE("GPL");