Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / arch / sparc / kernel / sun4m_irq.c
blob422c16dad1f66610f4d90b8723b652c658cfcae3
1 /*
2 * sun4m irq support
4 * djhr: Hacked out of irq.c into a CPU dependent version.
6 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
7 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
8 * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
9 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
12 #include <asm/timer.h>
13 #include <asm/traps.h>
14 #include <asm/pgalloc.h>
15 #include <asm/pgtable.h>
16 #include <asm/irq.h>
17 #include <asm/io.h>
18 #include <asm/cacheflush.h>
20 #include "irq.h"
21 #include "kernel.h"
23 /* Sample sun4m IRQ layout:
25 * 0x22 - Power
26 * 0x24 - ESP SCSI
27 * 0x26 - Lance ethernet
28 * 0x2b - Floppy
29 * 0x2c - Zilog uart
30 * 0x32 - SBUS level 0
31 * 0x33 - Parallel port, SBUS level 1
32 * 0x35 - SBUS level 2
33 * 0x37 - SBUS level 3
34 * 0x39 - Audio, Graphics card, SBUS level 4
35 * 0x3b - SBUS level 5
36 * 0x3d - SBUS level 6
38 * Each interrupt source has a mask bit in the interrupt registers.
39 * When the mask bit is set, this blocks interrupt deliver. So you
40 * clear the bit to enable the interrupt.
42 * Interrupts numbered less than 0x10 are software triggered interrupts
43 * and unused by Linux.
45 * Interrupt level assignment on sun4m:
47 * level source
48 * ------------------------------------------------------------
49 * 1 softint-1
50 * 2 softint-2, VME/SBUS level 1
51 * 3 softint-3, VME/SBUS level 2
52 * 4 softint-4, onboard SCSI
53 * 5 softint-5, VME/SBUS level 3
54 * 6 softint-6, onboard ETHERNET
55 * 7 softint-7, VME/SBUS level 4
56 * 8 softint-8, onboard VIDEO
57 * 9 softint-9, VME/SBUS level 5, Module Interrupt
58 * 10 softint-10, system counter/timer
59 * 11 softint-11, VME/SBUS level 6, Floppy
60 * 12 softint-12, Keyboard/Mouse, Serial
61 * 13 softint-13, VME/SBUS level 7, ISDN Audio
62 * 14 softint-14, per-processor counter/timer
63 * 15 softint-15, Asynchronous Errors (broadcast)
65 * Each interrupt source is masked distinctly in the sun4m interrupt
66 * registers. The PIL level alone is therefore ambiguous, since multiple
67 * interrupt sources map to a single PIL.
69 * This ambiguity is resolved in the 'intr' property for device nodes
70 * in the OF device tree. Each 'intr' property entry is composed of
71 * two 32-bit words. The first word is the IRQ priority value, which
72 * is what we're intersted in. The second word is the IRQ vector, which
73 * is unused.
75 * The low 4 bits of the IRQ priority indicate the PIL, and the upper
76 * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
77 * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
79 * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
80 * whereas a value of 0x33 is SBUS level 2. Here are some sample
81 * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
82 * Tadpole S3 GX systems.
84 * esp: 0x24 onboard ESP SCSI
85 * le: 0x26 onboard Lance ETHERNET
86 * p9100: 0x32 SBUS level 1 P9100 video
87 * bpp: 0x33 SBUS level 2 BPP parallel port device
88 * DBRI: 0x39 SBUS level 5 DBRI ISDN audio
89 * SUNW,leo: 0x39 SBUS level 5 LEO video
90 * pcmcia: 0x3b SBUS level 6 PCMCIA controller
91 * uctrl: 0x3b SBUS level 6 UCTRL device
92 * modem: 0x3d SBUS level 7 MODEM
93 * zs: 0x2c onboard keyboard/mouse/serial
94 * floppy: 0x2b onboard Floppy
95 * power: 0x22 onboard power device (XXX unknown mask bit XXX)
99 /* Code in entry.S needs to get at these register mappings. */
100 struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
101 struct sun4m_irq_global __iomem *sun4m_irq_global;
103 struct sun4m_handler_data {
104 bool percpu;
105 long mask;
108 /* Dave Redman (djhr@tadpole.co.uk)
109 * The sun4m interrupt registers.
111 #define SUN4M_INT_ENABLE 0x80000000
112 #define SUN4M_INT_E14 0x00000080
113 #define SUN4M_INT_E10 0x00080000
115 #define SUN4M_HARD_INT(x) (0x000000001 << (x))
116 #define SUN4M_SOFT_INT(x) (0x000010000 << (x))
118 #define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
119 #define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
120 #define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
121 #define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
122 #define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
123 #define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
124 #define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
125 #define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
126 #define SUN4M_INT_REALTIME 0x00080000 /* system timer */
127 #define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
128 #define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
129 #define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
130 #define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
131 #define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
132 #define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
133 #define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
135 #define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
136 SUN4M_INT_M2S_WRITE_ERR | \
137 SUN4M_INT_ECC_ERR | \
138 SUN4M_INT_VME_ERR)
140 #define SUN4M_INT_SBUS(x) (1 << (x+7))
141 #define SUN4M_INT_VME(x) (1 << (x))
143 /* Interrupt levels used by OBP */
144 #define OBP_INT_LEVEL_SOFT 0x10
145 #define OBP_INT_LEVEL_ONBOARD 0x20
146 #define OBP_INT_LEVEL_SBUS 0x30
147 #define OBP_INT_LEVEL_VME 0x40
149 #define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
150 #define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14)
152 static unsigned long sun4m_imask[0x50] = {
153 /* 0x00 - SMP */
154 0, SUN4M_SOFT_INT(1),
155 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
156 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
157 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
158 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
159 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
160 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
161 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
162 /* 0x10 - soft */
163 0, SUN4M_SOFT_INT(1),
164 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
165 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
166 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
167 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
168 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
169 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
170 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
171 /* 0x20 - onboard */
172 0, 0, 0, 0,
173 SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
174 SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
175 SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
176 (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
177 SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
178 /* 0x30 - sbus */
179 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
180 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
181 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
182 0, SUN4M_INT_SBUS(6), 0, 0,
183 /* 0x40 - vme */
184 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
185 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
186 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
187 0, SUN4M_INT_VME(6), 0, 0
190 static void sun4m_mask_irq(struct irq_data *data)
192 struct sun4m_handler_data *handler_data = data->handler_data;
193 int cpu = smp_processor_id();
195 if (handler_data->mask) {
196 unsigned long flags;
198 local_irq_save(flags);
199 if (handler_data->percpu) {
200 sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
201 } else {
202 sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
204 local_irq_restore(flags);
208 static void sun4m_unmask_irq(struct irq_data *data)
210 struct sun4m_handler_data *handler_data = data->handler_data;
211 int cpu = smp_processor_id();
213 if (handler_data->mask) {
214 unsigned long flags;
216 local_irq_save(flags);
217 if (handler_data->percpu) {
218 sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
219 } else {
220 sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
222 local_irq_restore(flags);
226 static unsigned int sun4m_startup_irq(struct irq_data *data)
228 irq_link(data->irq);
229 sun4m_unmask_irq(data);
230 return 0;
233 static void sun4m_shutdown_irq(struct irq_data *data)
235 sun4m_mask_irq(data);
236 irq_unlink(data->irq);
239 static struct irq_chip sun4m_irq = {
240 .name = "sun4m",
241 .irq_startup = sun4m_startup_irq,
242 .irq_shutdown = sun4m_shutdown_irq,
243 .irq_mask = sun4m_mask_irq,
244 .irq_unmask = sun4m_unmask_irq,
248 static unsigned int sun4m_build_device_irq(struct platform_device *op,
249 unsigned int real_irq)
251 struct sun4m_handler_data *handler_data;
252 unsigned int irq;
253 unsigned int pil;
255 if (real_irq >= OBP_INT_LEVEL_VME) {
256 prom_printf("Bogus sun4m IRQ %u\n", real_irq);
257 prom_halt();
259 pil = (real_irq & 0xf);
260 irq = irq_alloc(real_irq, pil);
262 if (irq == 0)
263 goto out;
265 handler_data = irq_get_handler_data(irq);
266 if (unlikely(handler_data))
267 goto out;
269 handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
270 if (unlikely(!handler_data)) {
271 prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
272 prom_halt();
275 handler_data->mask = sun4m_imask[real_irq];
276 handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
277 irq_set_chip_and_handler_name(irq, &sun4m_irq,
278 handle_level_irq, "level");
279 irq_set_handler_data(irq, handler_data);
281 out:
282 return irq;
285 #ifdef CONFIG_SMP
286 static void sun4m_send_ipi(int cpu, int level)
288 sbus_writel(SUN4M_SOFT_INT(level), &sun4m_irq_percpu[cpu]->set);
291 static void sun4m_clear_ipi(int cpu, int level)
293 sbus_writel(SUN4M_SOFT_INT(level), &sun4m_irq_percpu[cpu]->clear);
296 static void sun4m_set_udt(int cpu)
298 sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
300 #endif
302 struct sun4m_timer_percpu {
303 u32 l14_limit;
304 u32 l14_count;
305 u32 l14_limit_noclear;
306 u32 user_timer_start_stop;
309 static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
311 struct sun4m_timer_global {
312 u32 l10_limit;
313 u32 l10_count;
314 u32 l10_limit_noclear;
315 u32 reserved;
316 u32 timer_config;
319 static struct sun4m_timer_global __iomem *timers_global;
322 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
324 static void sun4m_clear_clock_irq(void)
326 sbus_readl(&timers_global->l10_limit);
329 void sun4m_nmi(struct pt_regs *regs)
331 unsigned long afsr, afar, si;
333 printk(KERN_ERR "Aieee: sun4m NMI received!\n");
334 /* XXX HyperSparc hack XXX */
335 __asm__ __volatile__("mov 0x500, %%g1\n\t"
336 "lda [%%g1] 0x4, %0\n\t"
337 "mov 0x600, %%g1\n\t"
338 "lda [%%g1] 0x4, %1\n\t" :
339 "=r" (afsr), "=r" (afar));
340 printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
341 si = sbus_readl(&sun4m_irq_global->pending);
342 printk(KERN_ERR "si=%08lx\n", si);
343 if (si & SUN4M_INT_MODULE_ERR)
344 printk(KERN_ERR "Module async error\n");
345 if (si & SUN4M_INT_M2S_WRITE_ERR)
346 printk(KERN_ERR "MBus/SBus async error\n");
347 if (si & SUN4M_INT_ECC_ERR)
348 printk(KERN_ERR "ECC memory error\n");
349 if (si & SUN4M_INT_VME_ERR)
350 printk(KERN_ERR "VME async error\n");
351 printk(KERN_ERR "you lose buddy boy...\n");
352 show_regs(regs);
353 prom_halt();
356 void sun4m_unmask_profile_irq(void)
358 unsigned long flags;
360 local_irq_save(flags);
361 sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
362 local_irq_restore(flags);
365 void sun4m_clear_profile_irq(int cpu)
367 sbus_readl(&timers_percpu[cpu]->l14_limit);
370 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
372 sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
375 static void __init sun4m_init_timers(irq_handler_t counter_fn)
377 struct device_node *dp = of_find_node_by_name(NULL, "counter");
378 int i, err, len, num_cpu_timers;
379 unsigned int irq;
380 const u32 *addr;
382 if (!dp) {
383 printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
384 return;
387 addr = of_get_property(dp, "address", &len);
388 of_node_put(dp);
389 if (!addr) {
390 printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
391 return;
394 num_cpu_timers = (len / sizeof(u32)) - 1;
395 for (i = 0; i < num_cpu_timers; i++) {
396 timers_percpu[i] = (void __iomem *)
397 (unsigned long) addr[i];
399 timers_global = (void __iomem *)
400 (unsigned long) addr[num_cpu_timers];
402 sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
404 master_l10_counter = &timers_global->l10_count;
406 irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
408 err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
409 if (err) {
410 printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
411 err);
412 return;
415 for (i = 0; i < num_cpu_timers; i++)
416 sbus_writel(0, &timers_percpu[i]->l14_limit);
417 if (num_cpu_timers == 4)
418 sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
420 #ifdef CONFIG_SMP
422 unsigned long flags;
423 struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
425 /* For SMP we use the level 14 ticker, however the bootup code
426 * has copied the firmware's level 14 vector into the boot cpu's
427 * trap table, we must fix this now or we get squashed.
429 local_irq_save(flags);
430 trap_table->inst_one = lvl14_save[0];
431 trap_table->inst_two = lvl14_save[1];
432 trap_table->inst_three = lvl14_save[2];
433 trap_table->inst_four = lvl14_save[3];
434 local_flush_cache_all();
435 local_irq_restore(flags);
437 #endif
440 void __init sun4m_init_IRQ(void)
442 struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
443 int len, i, mid, num_cpu_iregs;
444 const u32 *addr;
446 if (!dp) {
447 printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
448 return;
451 addr = of_get_property(dp, "address", &len);
452 of_node_put(dp);
453 if (!addr) {
454 printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
455 return;
458 num_cpu_iregs = (len / sizeof(u32)) - 1;
459 for (i = 0; i < num_cpu_iregs; i++) {
460 sun4m_irq_percpu[i] = (void __iomem *)
461 (unsigned long) addr[i];
463 sun4m_irq_global = (void __iomem *)
464 (unsigned long) addr[num_cpu_iregs];
466 local_irq_disable();
468 sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
469 for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
470 sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
472 if (num_cpu_iregs == 4)
473 sbus_writel(0, &sun4m_irq_global->interrupt_target);
475 BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
476 BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
478 sparc_irq_config.init_timers = sun4m_init_timers;
479 sparc_irq_config.build_device_irq = sun4m_build_device_irq;
481 #ifdef CONFIG_SMP
482 BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
483 BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
484 BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
485 #endif
487 /* Cannot enable interrupts until OBP ticker is disabled. */