arch/unicore32/configs/unicore32_defconfig

   1 ### General setup
   2 CONFIG_EXPERIMENTAL=y
   3 CONFIG_LOCALVERSION="-unicore32"
   4 CONFIG_SWAP=y
   5 CONFIG_SYSVIPC=y
   6 CONFIG_POSIX_MQUEUE=y
   7 CONFIG_HOTPLUG=y
   8 #       Initial RAM filesystem and RAM disk (initramfs/initrd) support
   9 #CONFIG_BLK_DEV_INITRD=y
  10 #CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
  11
  12 ### Enable loadable module support
  13 CONFIG_MODULES=n
  14 CONFIG_MODULE_UNLOAD=y
  15
  16 ### System Type
  17 CONFIG_ARCH_PUV3=y
  18 #       Board Selection
  19 CONFIG_PUV3_NB0916=y
  20 #       Processor Features
  21 CONFIG_CPU_DCACHE_LINE_DISABLE=y
  22 CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
  23
  24 ### Bus support
  25 CONFIG_PCI=y
  26 CONFIG_PCI_LEGACY=n
  27
  28 ### Boot options
  29 #       for debug, adding: earlyprintk=ocd,keep initcall_debug
  30 #       others support: test_suspend=mem root=/dev/sda
  31 #       hibernate support: resume=/dev/sda3
  32 CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
  33 # TODO: mem=512M video=unifb:1024x600-16@75
  34 # for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
  35 #       ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
  36 CONFIG_CMDLINE_FORCE=y
  37
  38 ### Power management options
  39 CONFIG_PM=y
  40 CONFIG_HIBERNATION=y
  41 CONFIG_PM_STD_PARTITION="/dev/sda3"
  42 CONFIG_CPU_FREQ=n
  43 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
  44
  45 ### Networking support
  46 CONFIG_NET=y
  47 #       Networking options
  48 CONFIG_PACKET=m
  49 CONFIG_UNIX=m
  50 #       TCP/IP networking
  51 CONFIG_INET=y
  52 CONFIG_IP_MULTICAST=y
  53 CONFIG_IP_PNP=y
  54 CONFIG_IPV6=n
  55 #       Wireless
  56 CONFIG_WIRELESS=y
  57 CONFIG_WIRELESS_EXT=y
  58 CONFIG_MAC80211=m
  59
  60 ### PKUnity SoC Features
  61 CONFIG_USB_WLAN_HED_AQ3=n
  62 CONFIG_USB_CMMB_INNOFIDEI=n
  63 CONFIG_I2C_BATTERY_BQ27200=n
  64 CONFIG_I2C_EEPROM_AT24=n
  65 CONFIG_LCD_BACKLIGHT=n
  66
  67 CONFIG_PUV3_UMAL=y
  68 CONFIG_PUV3_MUSB=n
  69 CONFIG_PUV3_AC97=n
  70 CONFIG_PUV3_NAND=n
  71 CONFIG_PUV3_MMC=n
  72 CONFIG_PUV3_UART=n
  73
  74 ### Device Drivers
  75 #       Memory Technology Device (MTD) support
  76 CONFIG_MTD=m
  77 CONFIG_MTD_UBI=m
  78 CONFIG_MTD_PARTITIONS=y
  79 CONFIG_MTD_CHAR=m
  80 CONFIG_MTD_BLKDEVS=m
  81 #       RAM/ROM/Flash chip drivers
  82 CONFIG_MTD_CFI=m
  83 CONFIG_MTD_JEDECPROBE=m
  84 CONFIG_MTD_CFI_AMDSTD=m
  85 #       Mapping drivers for chip access
  86 CONFIG_MTD_PHYSMAP=m
  87
  88 #       Block devices
  89 CONFIG_BLK_DEV_LOOP=m
  90
  91 #       SCSI device support
  92 CONFIG_SCSI=y
  93 CONFIG_BLK_DEV_SD=y
  94 CONFIG_BLK_DEV_SR=m
  95 CONFIG_CHR_DEV_SG=m
  96
  97 #       Serial ATA (prod) and Parallel ATA (experimental) drivers
  98 CONFIG_ATA=y
  99 CONFIG_SATA_VIA=y
 100
 101 #       Network device support
 102 CONFIG_NETDEVICES=y
 103 CONFIG_NET_ETHERNET=y
 104 CONFIG_NETDEV_1000=y
 105 #       Wireless LAN
 106 CONFIG_WLAN_80211=n
 107 CONFIG_RT2X00=n
 108 CONFIG_RT73USB=n
 109
 110 #       Input device support
 111 CONFIG_INPUT_EVDEV=m
 112 #       Keyboards
 113 CONFIG_KEYBOARD_GPIO=m
 114
 115 #       I2C support
 116 CONFIG_I2C=y
 117 CONFIG_I2C_PUV3=y
 118
 119 #       Hardware Monitoring support
 120 #CONFIG_SENSORS_LM75=m
 121 #       Generic Thermal sysfs driver
 122 #CONFIG_THERMAL=m
 123 #CONFIG_THERMAL_HWMON=y
 124
 125 #       Multimedia support
 126 CONFIG_MEDIA_SUPPORT=n
 127 CONFIG_VIDEO_DEV=n
 128 CONFIG_USB_VIDEO_CLASS=n
 129
 130 #       Graphics support
 131 CONFIG_FB=y
 132 CONFIG_FB_PUV3_UNIGFX=y
 133 #       Console display driver support
 134 CONFIG_VGA_CONSOLE=n
 135 CONFIG_FRAMEBUFFER_CONSOLE=y
 136 CONFIG_FONTS=y
 137 CONFIG_FONT_8x8=y
 138 CONFIG_FONT_8x16=y
 139 #       Bootup logo
 140 CONFIG_LOGO=n
 141
 142 #       Sound card support
 143 CONFIG_SOUND=m
 144 #       Advanced Linux Sound Architecture
 145 CONFIG_SND=m
 146 CONFIG_SND_MIXER_OSS=m
 147 CONFIG_SND_PCM_OSS=m
 148
 149 #       USB support
 150 CONFIG_USB_ARCH_HAS_HCD=n
 151 CONFIG_USB=n
 152 CONFIG_USB_DEVICEFS=n
 153 CONFIG_USB_PRINTER=n
 154 CONFIG_USB_STORAGE=n
 155 #       Inventra Highspeed Dual Role Controller
 156 CONFIG_USB_MUSB_HDRC=n
 157
 158 #       LED Support
 159 CONFIG_NEW_LEDS=y
 160 CONFIG_LEDS_CLASS=y
 161 CONFIG_LEDS_GPIO=y
 162 #       LED Triggers
 163 CONFIG_LEDS_TRIGGERS=y
 164 CONFIG_LEDS_TRIGGER_TIMER=y
 165 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 166 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 167
 168 #       Real Time Clock
 169 CONFIG_RTC_LIB=y
 170 CONFIG_RTC_CLASS=y
 171 CONFIG_RTC_DRV_PUV3=y
 172
 173 ### File systems
 174 CONFIG_EXT2_FS=m
 175 CONFIG_EXT3_FS=y
 176 CONFIG_EXT4_FS=y
 177 CONFIG_FUSE_FS=m
 178 #       CD-ROM/DVD Filesystems
 179 CONFIG_ISO9660_FS=m
 180 CONFIG_JOLIET=y
 181 CONFIG_UDF_FS=m
 182 #       DOS/FAT/NT Filesystems
 183 CONFIG_VFAT_FS=m
 184 #       Pseudo filesystems
 185 CONFIG_PROC_FS=y
 186 CONFIG_SYSFS=y
 187 CONFIG_TMPFS=y
 188 #       Miscellaneous filesystems
 189 CONFIG_MISC_FILESYSTEMS=y
 190 CONFIG_JFFS2_FS=m
 191 CONFIG_UBIFS_FS=m
 192 #       Network File Systems
 193 CONFIG_NETWORK_FILESYSTEMS=y
 194 CONFIG_NFS_FS=y
 195 CONFIG_NFS_V3=y
 196 CONFIG_ROOT_NFS=y
 197 #       Partition Types
 198 CONFIG_PARTITION_ADVANCED=y
 199 CONFIG_MSDOS_PARTITION=y
 200 #       Native language support
 201 CONFIG_NLS=y
 202 CONFIG_NLS_CODEPAGE_437=m
 203 CONFIG_NLS_CODEPAGE_936=m
 204 CONFIG_NLS_ISO8859_1=m
 205 CONFIG_NLS_UTF8=m
 206
 207 ### Kernel hacking
 208 CONFIG_FRAME_WARN=8096
 209 CONFIG_MAGIC_SYSRQ=y
 210 CONFIG_DEBUG_KERNEL=y
 211 CONFIG_PROVE_LOCKING=n
 212 CONFIG_DEBUG_BUGVERBOSE=y
 213 CONFIG_FRAME_POINTER=y
 214 CONFIG_DEBUG_LL=y
 215