drivers/clocksource/dw_apb_timer.c

   1 /*
   2  * (C) Copyright 2009 Intel Corporation
   3  * Author: Jacob Pan (jacob.jun.pan@intel.com)
   4  *
   5  * Shared with ARM platforms, Jamie Iles, Picochip 2011
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * Support for the Synopsys DesignWare APB Timers.
  12  */
  13 #include <linux/dw_apb_timer.h>
  14 #include <linux/delay.h>
  15 #include <linux/kernel.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/irq.h>
  18 #include <linux/io.h>
  19 #include <linux/slab.h>
  20
  21 #define APBT_MIN_PERIOD                 4
  22 #define APBT_MIN_DELTA_USEC             200
  23
  24 #define APBTMR_N_LOAD_COUNT             0x00
  25 #define APBTMR_N_CURRENT_VALUE          0x04
  26 #define APBTMR_N_CONTROL                0x08
  27 #define APBTMR_N_EOI                    0x0c
  28 #define APBTMR_N_INT_STATUS             0x10
  29
  30 #define APBTMRS_INT_STATUS              0xa0
  31 #define APBTMRS_EOI                     0xa4
  32 #define APBTMRS_RAW_INT_STATUS          0xa8
  33 #define APBTMRS_COMP_VERSION            0xac
  34
  35 #define APBTMR_CONTROL_ENABLE           (1 << 0)
  36 /* 1: periodic, 0:free running. */
  37 #define APBTMR_CONTROL_MODE_PERIODIC    (1 << 1)
  38 #define APBTMR_CONTROL_INT              (1 << 2)
  39
  40 static inline struct dw_apb_clock_event_device *
  41 ced_to_dw_apb_ced(struct clock_event_device *evt)
  42 {
  43         return container_of(evt, struct dw_apb_clock_event_device, ced);
  44 }
  45
  46 static inline struct dw_apb_clocksource *
  47 clocksource_to_dw_apb_clocksource(struct clocksource *cs)
  48 {
  49         return container_of(cs, struct dw_apb_clocksource, cs);
  50 }
  51
  52 static unsigned long apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
  53 {
  54         return readl(timer->base + offs);
  55 }
  56
  57 static void apbt_writel(struct dw_apb_timer *timer, unsigned long val,
  58                  unsigned long offs)
  59 {
  60         writel(val, timer->base + offs);
  61 }
  62
  63 static void apbt_disable_int(struct dw_apb_timer *timer)
  64 {
  65         unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
  66
  67         ctrl |= APBTMR_CONTROL_INT;
  68         apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
  69 }
  70
  71 /**
  72  * dw_apb_clockevent_pause() - stop the clock_event_device from running
  73  *
  74  * @dw_ced:     The APB clock to stop generating events.
  75  */
  76 void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
  77 {
  78         disable_irq(dw_ced->timer.irq);
  79         apbt_disable_int(&dw_ced->timer);
  80 }
  81
  82 static void apbt_eoi(struct dw_apb_timer *timer)
  83 {
  84         apbt_readl(timer, APBTMR_N_EOI);
  85 }
  86
  87 static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
  88 {
  89         struct clock_event_device *evt = data;
  90         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
  91
  92         if (!evt->event_handler) {
  93                 pr_info("Spurious APBT timer interrupt %d", irq);
  94                 return IRQ_NONE;
  95         }
  96
  97         if (dw_ced->eoi)
  98                 dw_ced->eoi(&dw_ced->timer);
  99
 100         evt->event_handler(evt);
 101         return IRQ_HANDLED;
 102 }
 103
 104 static void apbt_enable_int(struct dw_apb_timer *timer)
 105 {
 106         unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
 107         /* clear pending intr */
 108         apbt_readl(timer, APBTMR_N_EOI);
 109         ctrl &= ~APBTMR_CONTROL_INT;
 110         apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
 111 }
 112
 113 static void apbt_set_mode(enum clock_event_mode mode,
 114                           struct clock_event_device *evt)
 115 {
 116         unsigned long ctrl;
 117         unsigned long period;
 118         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 119
 120         pr_debug("%s CPU %d mode=%d\n", __func__, first_cpu(*evt->cpumask),
 121                  mode);
 122
 123         switch (mode) {
 124         case CLOCK_EVT_MODE_PERIODIC:
 125                 period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
 126                 ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 127                 ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
 128                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 129                 /*
 130                  * DW APB p. 46, have to disable timer before load counter,
 131                  * may cause sync problem.
 132                  */
 133                 ctrl &= ~APBTMR_CONTROL_ENABLE;
 134                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 135                 udelay(1);
 136                 pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
 137                 apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
 138                 ctrl |= APBTMR_CONTROL_ENABLE;
 139                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 140                 break;
 141
 142         case CLOCK_EVT_MODE_ONESHOT:
 143                 ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 144                 /*
 145                  * set free running mode, this mode will let timer reload max
 146                  * timeout which will give time (3min on 25MHz clock) to rearm
 147                  * the next event, therefore emulate the one-shot mode.
 148                  */
 149                 ctrl &= ~APBTMR_CONTROL_ENABLE;
 150                 ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
 151
 152                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 153                 /* write again to set free running mode */
 154                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 155
 156                 /*
 157                  * DW APB p. 46, load counter with all 1s before starting free
 158                  * running mode.
 159                  */
 160                 apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
 161                 ctrl &= ~APBTMR_CONTROL_INT;
 162                 ctrl |= APBTMR_CONTROL_ENABLE;
 163                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 164                 break;
 165
 166         case CLOCK_EVT_MODE_UNUSED:
 167         case CLOCK_EVT_MODE_SHUTDOWN:
 168                 ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 169                 ctrl &= ~APBTMR_CONTROL_ENABLE;
 170                 apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 171                 break;
 172
 173         case CLOCK_EVT_MODE_RESUME:
 174                 apbt_enable_int(&dw_ced->timer);
 175                 break;
 176         }
 177 }
 178
 179 static int apbt_next_event(unsigned long delta,
 180                            struct clock_event_device *evt)
 181 {
 182         unsigned long ctrl;
 183         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 184
 185         /* Disable timer */
 186         ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 187         ctrl &= ~APBTMR_CONTROL_ENABLE;
 188         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 189         /* write new count */
 190         apbt_writel(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
 191         ctrl |= APBTMR_CONTROL_ENABLE;
 192         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 193
 194         return 0;
 195 }
 196
 197 /**
 198  * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
 199  *
 200  * @cpu:        The CPU the events will be targeted at.
 201  * @name:       The name used for the timer and the IRQ for it.
 202  * @rating:     The rating to give the timer.
 203  * @base:       I/O base for the timer registers.
 204  * @irq:        The interrupt number to use for the timer.
 205  * @freq:       The frequency that the timer counts at.
 206  *
 207  * This creates a clock_event_device for using with the generic clock layer
 208  * but does not start and register it.  This should be done with
 209  * dw_apb_clockevent_register() as the next step.  If this is the first time
 210  * it has been called for a timer then the IRQ will be requested, if not it
 211  * just be enabled to allow CPU hotplug to avoid repeatedly requesting and
 212  * releasing the IRQ.
 213  */
 214 struct dw_apb_clock_event_device *
 215 dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 216                        void __iomem *base, int irq, unsigned long freq)
 217 {
 218         struct dw_apb_clock_event_device *dw_ced =
 219                 kzalloc(sizeof(*dw_ced), GFP_KERNEL);
 220         int err;
 221
 222         if (!dw_ced)
 223                 return NULL;
 224
 225         dw_ced->timer.base = base;
 226         dw_ced->timer.irq = irq;
 227         dw_ced->timer.freq = freq;
 228
 229         clockevents_calc_mult_shift(&dw_ced->ced, freq, APBT_MIN_PERIOD);
 230         dw_ced->ced.max_delta_ns = clockevent_delta2ns(0x7fffffff,
 231                                                        &dw_ced->ced);
 232         dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 233         dw_ced->ced.cpumask = cpumask_of(cpu);
 234         dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 235         dw_ced->ced.set_mode = apbt_set_mode;
 236         dw_ced->ced.set_next_event = apbt_next_event;
 237         dw_ced->ced.irq = dw_ced->timer.irq;
 238         dw_ced->ced.rating = rating;
 239         dw_ced->ced.name = name;
 240
 241         dw_ced->irqaction.name          = dw_ced->ced.name;
 242         dw_ced->irqaction.handler       = dw_apb_clockevent_irq;
 243         dw_ced->irqaction.dev_id        = &dw_ced->ced;
 244         dw_ced->irqaction.irq           = irq;
 245         dw_ced->irqaction.flags         = IRQF_TIMER | IRQF_IRQPOLL |
 246                                           IRQF_NOBALANCING |
 247                                           IRQF_DISABLED;
 248
 249         dw_ced->eoi = apbt_eoi;
 250         err = setup_irq(irq, &dw_ced->irqaction);
 251         if (err) {
 252                 pr_err("failed to request timer irq\n");
 253                 kfree(dw_ced);
 254                 dw_ced = NULL;
 255         }
 256
 257         return dw_ced;
 258 }
 259
 260 /**
 261  * dw_apb_clockevent_resume() - resume a clock that has been paused.
 262  *
 263  * @dw_ced:     The APB clock to resume.
 264  */
 265 void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced)
 266 {
 267         enable_irq(dw_ced->timer.irq);
 268 }
 269
 270 /**
 271  * dw_apb_clockevent_stop() - stop the clock_event_device and release the IRQ.
 272  *
 273  * @dw_ced:     The APB clock to stop generating the events.
 274  */
 275 void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced)
 276 {
 277         free_irq(dw_ced->timer.irq, &dw_ced->ced);
 278 }
 279
 280 /**
 281  * dw_apb_clockevent_register() - register the clock with the generic layer
 282  *
 283  * @dw_ced:     The APB clock to register as a clock_event_device.
 284  */
 285 void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced)
 286 {
 287         apbt_writel(&dw_ced->timer, 0, APBTMR_N_CONTROL);
 288         clockevents_register_device(&dw_ced->ced);
 289         apbt_enable_int(&dw_ced->timer);
 290 }
 291
 292 /**
 293  * dw_apb_clocksource_start() - start the clocksource counting.
 294  *
 295  * @dw_cs:      The clocksource to start.
 296  *
 297  * This is used to start the clocksource before registration and can be used
 298  * to enable calibration of timers.
 299  */
 300 void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
 301 {
 302         /*
 303          * start count down from 0xffff_ffff. this is done by toggling the
 304          * enable bit then load initial load count to ~0.
 305          */
 306         unsigned long ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
 307
 308         ctrl &= ~APBTMR_CONTROL_ENABLE;
 309         apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
 310         apbt_writel(&dw_cs->timer, ~0, APBTMR_N_LOAD_COUNT);
 311         /* enable, mask interrupt */
 312         ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
 313         ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
 314         apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
 315         /* read it once to get cached counter value initialized */
 316         dw_apb_clocksource_read(dw_cs);
 317 }
 318
 319 static cycle_t __apbt_read_clocksource(struct clocksource *cs)
 320 {
 321         unsigned long current_count;
 322         struct dw_apb_clocksource *dw_cs =
 323                 clocksource_to_dw_apb_clocksource(cs);
 324
 325         current_count = apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
 326
 327         return (cycle_t)~current_count;
 328 }
 329
 330 static void apbt_restart_clocksource(struct clocksource *cs)
 331 {
 332         struct dw_apb_clocksource *dw_cs =
 333                 clocksource_to_dw_apb_clocksource(cs);
 334
 335         dw_apb_clocksource_start(dw_cs);
 336 }
 337
 338 /**
 339  * dw_apb_clocksource_init() - use an APB timer as a clocksource.
 340  *
 341  * @rating:     The rating to give the clocksource.
 342  * @name:       The name for the clocksource.
 343  * @base:       The I/O base for the timer registers.
 344  * @freq:       The frequency that the timer counts at.
 345  *
 346  * This creates a clocksource using an APB timer but does not yet register it
 347  * with the clocksource system.  This should be done with
 348  * dw_apb_clocksource_register() as the next step.
 349  */
 350 struct dw_apb_clocksource *
 351 dw_apb_clocksource_init(unsigned rating, char *name, void __iomem *base,
 352                         unsigned long freq)
 353 {
 354         struct dw_apb_clocksource *dw_cs = kzalloc(sizeof(*dw_cs), GFP_KERNEL);
 355
 356         if (!dw_cs)
 357                 return NULL;
 358
 359         dw_cs->timer.base = base;
 360         dw_cs->timer.freq = freq;
 361         dw_cs->cs.name = name;
 362         dw_cs->cs.rating = rating;
 363         dw_cs->cs.read = __apbt_read_clocksource;
 364         dw_cs->cs.mask = CLOCKSOURCE_MASK(32);
 365         dw_cs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 366         dw_cs->cs.resume = apbt_restart_clocksource;
 367
 368         return dw_cs;
 369 }
 370
 371 /**
 372  * dw_apb_clocksource_register() - register the APB clocksource.
 373  *
 374  * @dw_cs:      The clocksource to register.
 375  */
 376 void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs)
 377 {
 378         clocksource_register_hz(&dw_cs->cs, dw_cs->timer.freq);
 379 }
 380
 381 /**
 382  * dw_apb_clocksource_read() - read the current value of a clocksource.
 383  *
 384  * @dw_cs:      The clocksource to read.
 385  */
 386 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs)
 387 {
 388         return (cycle_t)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
 389 }
 390
 391 /**
 392  * dw_apb_clocksource_unregister() - unregister and free a clocksource.
 393  *
 394  * @dw_cs:      The clocksource to unregister/free.
 395  */
 396 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs)
 397 {
 398         clocksource_unregister(&dw_cs->cs);
 399
 400         kfree(dw_cs);
 401 }