?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / drivers / media / common / saa7146_hlp.c
blobc9c6e9a6c31d30e187ef38b480d0a46a226f1803
1 #include <linux/kernel.h>
2 #include <linux/export.h>
3 #include <media/saa7146_vv.h>
4
5 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
6 {
7 /* clear out the necessary bits */
8 *clip_format &= 0x0000ffff;
9 /* set these bits new */
10 *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
11 }
12
13 static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
14 {
15 *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
16 *hps_ctrl |= (source << 30) | (sync << 28);
17 }
18
19 static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
20 {
21 int hyo = 0, hxo = 0;
22
23 hyo = vv->standard->v_offset;
24 hxo = vv->standard->h_offset;
25
26 *hps_h_scale &= ~(MASK_B0 | 0xf00);
27 *hps_h_scale |= (hxo << 0);
28
29 *hps_ctrl &= ~(MASK_W0 | MASK_B2);
30 *hps_ctrl |= (hyo << 12);
31 }
32
33 /* helper functions for the calculation of the horizontal- and vertical
34 scaling registers, clip-format-register etc ...
35 these functions take pointers to the (most-likely read-out
36 original-values) and manipulate them according to the requested
37 changes.
38 */
39
40 /* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
41 static struct {
42 u16 hps_coeff;
43 u16 weight_sum;
44 } hps_h_coeff_tab [] = {
45 {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8},
46 {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8},
47 {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8},
48 {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8},
49 {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8},
50 {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8},
51 {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
52 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
53 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
54 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8},
55 {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8},
56 {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8},
57 {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16}
58 };
59
60 /* table of attenuation values for horizontal scaling */
61 static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
62
63 /* calculate horizontal scale registers */
64 static int calculate_h_scale_registers(struct saa7146_dev *dev,
65 int in_x, int out_x, int flip_lr,
66 u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
67 {
68 /* horizontal prescaler */
69 u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
70 /* horizontal scaler */
71 u32 xim = 0, xp = 0, xsci =0;
72 /* vertical scale & gain */
73 u32 pfuv = 0;
74
75 /* helper variables */
76 u32 h_atten = 0, i = 0;
77
78 if ( 0 == out_x ) {
79 return -EINVAL;
80 }
81
82 /* mask out vanity-bit */
83 *hps_ctrl &= ~MASK_29;
84
85 /* calculate prescale-(xspc)-value: [n .. 1/2) : 1
86 [1/2 .. 1/3) : 2
87 [1/3 .. 1/4) : 3
88 ... */
89 if (in_x > out_x) {
90 xpsc = in_x / out_x;
91 }
92 else {
93 /* zooming */
94 xpsc = 1;
95 }
96
97 /* if flip_lr-bit is set, number of pixels after
98 horizontal prescaling must be < 384 */
99 if ( 0 != flip_lr ) {
100
101 /* set vanity bit */
102 *hps_ctrl |= MASK_29;
103
104 while (in_x / xpsc >= 384 )
105 xpsc++;
106 }
107 /* if zooming is wanted, number of pixels after
108 horizontal prescaling must be < 768 */
109 else {
110 while ( in_x / xpsc >= 768 )
111 xpsc++;
112 }
113
114 /* maximum prescale is 64 (p.69) */
115 if ( xpsc > 64 )
116 xpsc = 64;
117
118 /* keep xacm clear*/
119 xacm = 0;
120
121 /* set horizontal filter parameters (CXY = CXUV) */
122 cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
123 cxuv = cxy;
124
125 /* calculate and set horizontal fine scale (xsci) */
126
127 /* bypass the horizontal scaler ? */
128 if ( (in_x == out_x) && ( 1 == xpsc ) )
129 xsci = 0x400;
130 else
131 xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
132
133 /* set start phase for horizontal fine scale (xp) to 0 */
134 xp = 0;
135
136 /* set xim, if we bypass the horizontal scaler */
137 if ( 0x400 == xsci )
138 xim = 1;
139 else
140 xim = 0;
141
142 /* if the prescaler is bypassed, enable horizontal
143 accumulation mode (xacm) and clear dcgx */
144 if( 1 == xpsc ) {
145 xacm = 1;
146 dcgx = 0;
147 } else {
148 xacm = 0;
149 /* get best match in the table of attenuations
150 for horizontal scaling */
151 h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
152
153 for (i = 0; h_attenuation[i] != 0; i++) {
154 if (h_attenuation[i] >= h_atten)
155 break;
156 }
157
158 dcgx = i;
159 }
160
161 /* the horizontal scaling increment controls the UV filter
162 to reduce the bandwidth to improve the display quality,
163 so set it ... */
164 if ( xsci == 0x400)
165 pfuv = 0x00;
166 else if ( xsci < 0x600)
167 pfuv = 0x01;
168 else if ( xsci < 0x680)
169 pfuv = 0x11;
170 else if ( xsci < 0x700)
171 pfuv = 0x22;
172 else
173 pfuv = 0x33;
174
175
176 *hps_v_gain &= MASK_W0|MASK_B2;
177 *hps_v_gain |= (pfuv << 24);
178
179 *hps_h_scale &= ~(MASK_W1 | 0xf000);
180 *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12);
181
182 *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
183
184 return 0;
185 }
186
187 static struct {
188 u16 hps_coeff;
189 u16 weight_sum;
190 } hps_v_coeff_tab [] = {
191 {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8},
192 {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16},
193 {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16},
194 {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32},
195 {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32},
196 {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32},
197 {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
198 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
199 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
200 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64},
201 {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64},
202 {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64},
203 {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128}
204 };
205
206 /* table of attenuation values for vertical scaling */
207 static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
208
209 /* calculate vertical scale registers */
210 static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
211 int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
212 {
213 int lpi = 0;
214
215 /* vertical scaling */
216 u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
217 /* vertical scale & gain */
218 u32 dcgy = 0, cya_cyb = 0;
219
220 /* helper variables */
221 u32 v_atten = 0, i = 0;
222
223 /* error, if vertical zooming */
224 if ( in_y < out_y ) {
225 return -EINVAL;
226 }
227
228 /* linear phase interpolation may be used
229 if scaling is between 1 and 1/2 (both fields used)
230 or scaling is between 1/2 and 1/4 (if only one field is used) */
231
232 if (V4L2_FIELD_HAS_BOTH(field)) {
233 if( 2*out_y >= in_y) {
234 lpi = 1;
235 }
236 } else if (field == V4L2_FIELD_TOP
237 || field == V4L2_FIELD_ALTERNATE
238 || field == V4L2_FIELD_BOTTOM) {
239 if( 4*out_y >= in_y ) {
240 lpi = 1;
241 }
242 out_y *= 2;
243 }
244 if( 0 != lpi ) {
245
246 yacm = 0;
247 yacl = 0;
248 cya_cyb = 0x00ff;
249
250 /* calculate scaling increment */
251 if ( in_y > out_y )
252 ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
253 else
254 ysci = 0;
255
256 dcgy = 0;
257
258 /* calculate ype and ypo */
259 ype = ysci / 16;
260 ypo = ype + (ysci / 64);
261
262 } else {
263 yacm = 1;
264
265 /* calculate scaling increment */
266 ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
267
268 /* calculate ype and ypo */
269 ypo = ype = ((ysci + 15) / 16);
270
271 /* the sequence length interval (yacl) has to be set according
272 to the prescale value, e.g. [n .. 1/2) : 0
273 [1/2 .. 1/3) : 1
274 [1/3 .. 1/4) : 2
275 ... */
276 if ( ysci < 512) {
277 yacl = 0;
278 } else {
279 yacl = ( ysci / (1024 - ysci) );
280 }
281
282 /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
283 cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
284
285 /* get best match in the table of attenuations for vertical scaling */
286 v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
287
288 for (i = 0; v_attenuation[i] != 0; i++) {
289 if (v_attenuation[i] >= v_atten)
290 break;
291 }
292
293 dcgy = i;
294 }
295
296 /* ypo and ype swapped in spec ? */
297 *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
298
299 *hps_v_gain &= ~(MASK_W0|MASK_B2);
300 *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0);
301
302 return 0;
303 }
304
305 /* simple bubble-sort algorithm with duplicate elimination */
306 static int sort_and_eliminate(u32* values, int* count)
307 {
308 int low = 0, high = 0, top = 0, temp = 0;
309 int cur = 0, next = 0;
310
311 /* sanity checks */
312 if( (0 > *count) || (NULL == values) ) {
313 return -EINVAL;
314 }
315
316 /* bubble sort the first @count items of the array @values */
317 for( top = *count; top > 0; top--) {
318 for( low = 0, high = 1; high < top; low++, high++) {
319 if( values[low] > values[high] ) {
320 temp = values[low];
321 values[low] = values[high];
322 values[high] = temp;
323 }
324 }
325 }
326
327 /* remove duplicate items */
328 for( cur = 0, next = 1; next < *count; next++) {
329 if( values[cur] != values[next])
330 values[++cur] = values[next];
331 }
332
333 *count = cur + 1;
334
335 return 0;
336 }
337
338 static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
339 struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
340 {
341 struct saa7146_vv *vv = dev->vv_data;
342 __le32 *clipping = vv->d_clipping.cpu_addr;
343
344 int width = fh->ov.win.w.width;
345 int height = fh->ov.win.w.height;
346 int clipcount = fh->ov.nclips;
347
348 u32 line_list[32];
349 u32 pixel_list[32];
350 int numdwords = 0;
351
352 int i = 0, j = 0;
353 int cnt_line = 0, cnt_pixel = 0;
354
355 int x[32], y[32], w[32], h[32];
356
357 /* clear out memory */
358 memset(&line_list[0], 0x00, sizeof(u32)*32);
359 memset(&pixel_list[0], 0x00, sizeof(u32)*32);
360 memset(clipping, 0x00, SAA7146_CLIPPING_MEM);
361
362 /* fill the line and pixel-lists */
363 for(i = 0; i < clipcount; i++) {
364 int l = 0, r = 0, t = 0, b = 0;
365
366 x[i] = fh->ov.clips[i].c.left;
367 y[i] = fh->ov.clips[i].c.top;
368 w[i] = fh->ov.clips[i].c.width;
369 h[i] = fh->ov.clips[i].c.height;
370
371 if( w[i] < 0) {
372 x[i] += w[i]; w[i] = -w[i];
373 }
374 if( h[i] < 0) {
375 y[i] += h[i]; h[i] = -h[i];
376 }
377 if( x[i] < 0) {
378 w[i] += x[i]; x[i] = 0;
379 }
380 if( y[i] < 0) {
381 h[i] += y[i]; y[i] = 0;
382 }
383 if( 0 != vv->vflip ) {
384 y[i] = height - y[i] - h[i];
385 }
386
387 l = x[i];
388 r = x[i]+w[i];
389 t = y[i];
390 b = y[i]+h[i];
391
392 /* insert left/right coordinates */
393 pixel_list[ 2*i ] = min_t(int, l, width);
394 pixel_list[(2*i)+1] = min_t(int, r, width);
395 /* insert top/bottom coordinates */
396 line_list[ 2*i ] = min_t(int, t, height);
397 line_list[(2*i)+1] = min_t(int, b, height);
398 }
399
400 /* sort and eliminate lists */
401 cnt_line = cnt_pixel = 2*clipcount;
402 sort_and_eliminate( &pixel_list[0], &cnt_pixel );
403 sort_and_eliminate( &line_list[0], &cnt_line );
404
405 /* calculate the number of used u32s */
406 numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
407 numdwords = max_t(int, 4, numdwords);
408 numdwords = min_t(int, 64, numdwords);
409
410 /* fill up cliptable */
411 for(i = 0; i < cnt_pixel; i++) {
412 clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
413 }
414 for(i = 0; i < cnt_line; i++) {
415 clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
416 }
417
418 /* fill up cliptable with the display infos */
419 for(j = 0; j < clipcount; j++) {
420
421 for(i = 0; i < cnt_pixel; i++) {
422
423 if( x[j] < 0)
424 x[j] = 0;
425
426 if( pixel_list[i] < (x[j] + w[j])) {
427
428 if ( pixel_list[i] >= x[j] ) {
429 clipping[2*i] |= cpu_to_le32(1 << j);
430 }
431 }
432 }
433 for(i = 0; i < cnt_line; i++) {
434
435 if( y[j] < 0)
436 y[j] = 0;
437
438 if( line_list[i] < (y[j] + h[j]) ) {
439
440 if( line_list[i] >= y[j] ) {
441 clipping[(2*i)+1] |= cpu_to_le32(1 << j);
442 }
443 }
444 }
445 }
446
447 /* adjust arbitration control register */
448 *arbtr_ctrl &= 0xffff00ff;
449 *arbtr_ctrl |= 0x00001c00;
450
451 vdma2->base_even = vv->d_clipping.dma_handle;
452 vdma2->base_odd = vv->d_clipping.dma_handle;
453 vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
454 vdma2->base_page = 0x04;
455 vdma2->pitch = 0x00;
456 vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) );
457
458 /* set clipping-mode. this depends on the field(s) used */
459 *clip_format &= 0xfffffff7;
460 if (V4L2_FIELD_HAS_BOTH(field)) {
461 *clip_format |= 0x00000008;
462 } else {
463 *clip_format |= 0x00000000;
464 }
465 }
466
467 /* disable clipping */
468 static void saa7146_disable_clipping(struct saa7146_dev *dev)
469 {
470 u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
471
472 /* mask out relevant bits (=lower word)*/
473 clip_format &= MASK_W1;
474
475 /* upload clipping-registers*/
476 saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
477 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
478
479 /* disable video dma2 */
480 saa7146_write(dev, MC1, MASK_21);
481 }
482
483 static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
484 {
485 struct saa7146_dev *dev = fh->dev;
486 enum v4l2_field field = fh->ov.win.field;
487 struct saa7146_video_dma vdma2;
488 u32 clip_format;
489 u32 arbtr_ctrl;
490
491 /* check clipcount, disable clipping if clipcount == 0*/
492 if( fh->ov.nclips == 0 ) {
493 saa7146_disable_clipping(dev);
494 return;
495 }
496
497 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
498 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
499
500 calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
501
502 /* set clipping format */
503 clip_format &= 0xffff0008;
504 clip_format |= (SAA7146_CLIPPING_RECT << 4);
505
506 /* prepare video dma2 */
507 saa7146_write(dev, BASE_EVEN2, vdma2.base_even);
508 saa7146_write(dev, BASE_ODD2, vdma2.base_odd);
509 saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr);
510 saa7146_write(dev, BASE_PAGE2, vdma2.base_page);
511 saa7146_write(dev, PITCH2, vdma2.pitch);
512 saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte);
513
514 /* prepare the rest */
515 saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
516 saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
517
518 /* upload clip_control-register, clipping-registers, enable video dma2 */
519 saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
520 saa7146_write(dev, MC1, (MASK_05 | MASK_21));
521 }
522
523 static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
524 {
525 struct saa7146_vv *vv = dev->vv_data;
526
527 int source = vv->current_hps_source;
528 int sync = vv->current_hps_sync;
529
530 u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
531
532 /* set vertical scale */
533 hps_v_scale = 0; /* all bits get set by the function-call */
534 hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
535 calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
536
537 /* set horizontal scale */
538 hps_ctrl = 0;
539 hps_h_prescale = 0; /* all bits get set in the function */
540 hps_h_scale = 0;
541 calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
542
543 /* set hyo and hxo */
544 calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
545 calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
546
547 /* write out new register contents */
548 saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
549 saa7146_write(dev, HPS_V_GAIN, hps_v_gain);
550 saa7146_write(dev, HPS_CTRL, hps_ctrl);
551 saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
552 saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
553
554 /* upload shadow-ram registers */
555 saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
556 }
557
558 /* calculate the new memory offsets for a desired position */
559 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
560 {
561 struct saa7146_vv *vv = dev->vv_data;
562 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
563
564 int b_depth = vv->ov_fmt->depth;
565 int b_bpl = vv->ov_fb.fmt.bytesperline;
566 /* The unsigned long cast is to remove a 64-bit compile warning since
567 it looks like a 64-bit address is cast to a 32-bit value, even
568 though the base pointer is really a 32-bit physical address that
569 goes into a 32-bit DMA register.
570 FIXME: might not work on some 64-bit platforms, but see the FIXME
571 in struct v4l2_framebuffer (videodev2.h) for that.
572 */
573 u32 base = (u32)(unsigned long)vv->ov_fb.base;
574
575 struct saa7146_video_dma vdma1;
576
577 /* calculate memory offsets for picture, look if we shall top-down-flip */
578 vdma1.pitch = 2*b_bpl;
579 if ( 0 == vv->vflip ) {
580 vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
581 vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2);
582 vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
583 }
584 else {
585 vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
586 vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2);
587 vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
588 }
589
590 if (V4L2_FIELD_HAS_BOTH(field)) {
591 } else if (field == V4L2_FIELD_ALTERNATE) {
592 /* fixme */
593 vdma1.base_odd = vdma1.prot_addr;
594 vdma1.pitch /= 2;
595 } else if (field == V4L2_FIELD_TOP) {
596 vdma1.base_odd = vdma1.prot_addr;
597 vdma1.pitch /= 2;
598 } else if (field == V4L2_FIELD_BOTTOM) {
599 vdma1.base_odd = vdma1.base_even;
600 vdma1.base_even = vdma1.prot_addr;
601 vdma1.pitch /= 2;
602 }
603
604 if ( 0 != vv->vflip ) {
605 vdma1.pitch *= -1;
606 }
607
608 vdma1.base_page = sfmt->swap;
609 vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
610
611 saa7146_write_out_dma(dev, 1, &vdma1);
612 }
613
614 static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
615 {
616 u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
617
618 /* call helper function */
619 calculate_output_format_register(dev,palette,&clip_format);
620
621 /* update the hps registers */
622 saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
623 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
624 }
625
626 /* select input-source */
627 void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
628 {
629 struct saa7146_vv *vv = dev->vv_data;
630 u32 hps_ctrl = 0;
631
632 /* read old state */
633 hps_ctrl = saa7146_read(dev, HPS_CTRL);
634
635 hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
636 hps_ctrl |= (source << 30) | (sync << 28);
637
638 /* write back & upload register */
639 saa7146_write(dev, HPS_CTRL, hps_ctrl);
640 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
641
642 vv->current_hps_source = source;
643 vv->current_hps_sync = sync;
644 }
645 EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
646
647 int saa7146_enable_overlay(struct saa7146_fh *fh)
648 {
649 struct saa7146_dev *dev = fh->dev;
650 struct saa7146_vv *vv = dev->vv_data;
651
652 saa7146_set_window(dev, fh->ov.win.w.width, fh->ov.win.w.height, fh->ov.win.field);
653 saa7146_set_position(dev, fh->ov.win.w.left, fh->ov.win.w.top, fh->ov.win.w.height, fh->ov.win.field, vv->ov_fmt->pixelformat);
654 saa7146_set_output_format(dev, vv->ov_fmt->trans);
655 saa7146_set_clipping_rect(fh);
656
657 /* enable video dma1 */
658 saa7146_write(dev, MC1, (MASK_06 | MASK_22));
659 return 0;
660 }
661
662 void saa7146_disable_overlay(struct saa7146_fh *fh)
663 {
664 struct saa7146_dev *dev = fh->dev;
665
666 /* disable clipping + video dma1 */
667 saa7146_disable_clipping(dev);
668 saa7146_write(dev, MC1, MASK_22);
669 }
670
671 void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
672 {
673 int where = 0;
674
675 if( which < 1 || which > 3) {
676 return;
677 }
678
679 /* calculate starting address */
680 where = (which-1)*0x18;
681
682 saa7146_write(dev, where, vdma->base_odd);
683 saa7146_write(dev, where+0x04, vdma->base_even);
684 saa7146_write(dev, where+0x08, vdma->prot_addr);
685 saa7146_write(dev, where+0x0c, vdma->pitch);
686 saa7146_write(dev, where+0x10, vdma->base_page);
687 saa7146_write(dev, where+0x14, vdma->num_line_byte);
688
689 /* upload */
690 saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
691 /*
692 printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even);
693 printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd);
694 printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr);
695 printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page);
696 printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch);
697 printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
698 */
699 }
700
701 static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
702 {
703 struct saa7146_vv *vv = dev->vv_data;
704 struct saa7146_video_dma vdma1;
705
706 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
707
708 int width = buf->fmt->width;
709 int height = buf->fmt->height;
710 int bytesperline = buf->fmt->bytesperline;
711 enum v4l2_field field = buf->fmt->field;
712
713 int depth = sfmt->depth;
714
715 DEB_CAP(("[size=%dx%d,fields=%s]\n",
716 width,height,v4l2_field_names[field]));
717
718 if( bytesperline != 0) {
719 vdma1.pitch = bytesperline*2;
720 } else {
721 vdma1.pitch = (width*depth*2)/8;
722 }
723 vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
724 vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap;
725
726 if( 0 != vv->vflip ) {
727 vdma1.prot_addr = buf->pt[0].offset;
728 vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
729 vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
730 } else {
731 vdma1.base_even = buf->pt[0].offset;
732 vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
733 vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
734 }
735
736 if (V4L2_FIELD_HAS_BOTH(field)) {
737 } else if (field == V4L2_FIELD_ALTERNATE) {
738 /* fixme */
739 if ( vv->last_field == V4L2_FIELD_TOP ) {
740 vdma1.base_odd = vdma1.prot_addr;
741 vdma1.pitch /= 2;
742 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
743 vdma1.base_odd = vdma1.base_even;
744 vdma1.base_even = vdma1.prot_addr;
745 vdma1.pitch /= 2;
746 }
747 } else if (field == V4L2_FIELD_TOP) {
748 vdma1.base_odd = vdma1.prot_addr;
749 vdma1.pitch /= 2;
750 } else if (field == V4L2_FIELD_BOTTOM) {
751 vdma1.base_odd = vdma1.base_even;
752 vdma1.base_even = vdma1.prot_addr;
753 vdma1.pitch /= 2;
754 }
755
756 if( 0 != vv->vflip ) {
757 vdma1.pitch *= -1;
758 }
759
760 saa7146_write_out_dma(dev, 1, &vdma1);
761 return 0;
762 }
763
764 static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
765 {
766 int height = buf->fmt->height;
767 int width = buf->fmt->width;
768
769 vdma2->pitch = width;
770 vdma3->pitch = width;
771
772 /* fixme: look at bytesperline! */
773
774 if( 0 != vv->vflip ) {
775 vdma2->prot_addr = buf->pt[1].offset;
776 vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
777 vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
778
779 vdma3->prot_addr = buf->pt[2].offset;
780 vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
781 vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
782 } else {
783 vdma3->base_even = buf->pt[2].offset;
784 vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2);
785 vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
786
787 vdma2->base_even = buf->pt[1].offset;
788 vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2);
789 vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
790 }
791
792 return 0;
793 }
794
795 static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
796 {
797 int height = buf->fmt->height;
798 int width = buf->fmt->width;
799
800 vdma2->pitch = width/2;
801 vdma3->pitch = width/2;
802
803 if( 0 != vv->vflip ) {
804 vdma2->prot_addr = buf->pt[2].offset;
805 vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
806 vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
807
808 vdma3->prot_addr = buf->pt[1].offset;
809 vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
810 vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
811
812 } else {
813 vdma3->base_even = buf->pt[2].offset;
814 vdma3->base_odd = vdma3->base_even + (vdma3->pitch);
815 vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
816
817 vdma2->base_even = buf->pt[1].offset;
818 vdma2->base_odd = vdma2->base_even + (vdma2->pitch);
819 vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
820 }
821 return 0;
822 }
823
824 static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
825 {
826 struct saa7146_vv *vv = dev->vv_data;
827 struct saa7146_video_dma vdma1;
828 struct saa7146_video_dma vdma2;
829 struct saa7146_video_dma vdma3;
830
831 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
832
833 int width = buf->fmt->width;
834 int height = buf->fmt->height;
835 enum v4l2_field field = buf->fmt->field;
836
837 BUG_ON(0 == buf->pt[0].dma);
838 BUG_ON(0 == buf->pt[1].dma);
839 BUG_ON(0 == buf->pt[2].dma);
840
841 DEB_CAP(("[size=%dx%d,fields=%s]\n",
842 width,height,v4l2_field_names[field]));
843
844 /* fixme: look at bytesperline! */
845
846 /* fixme: what happens for user space buffers here?. The offsets are
847 most likely wrong, this version here only works for page-aligned
848 buffers, modifications to the pagetable-functions are necessary...*/
849
850 vdma1.pitch = width*2;
851 vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
852 vdma1.base_page = buf->pt[0].dma | ME1;
853
854 if( 0 != vv->vflip ) {
855 vdma1.prot_addr = buf->pt[0].offset;
856 vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
857 vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
858 } else {
859 vdma1.base_even = buf->pt[0].offset;
860 vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
861 vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
862 }
863
864 vdma2.num_line_byte = 0; /* unused */
865 vdma2.base_page = buf->pt[1].dma | ME1;
866
867 vdma3.num_line_byte = 0; /* unused */
868 vdma3.base_page = buf->pt[2].dma | ME1;
869
870 switch( sfmt->depth ) {
871 case 12: {
872 calc_planar_420(vv,buf,&vdma2,&vdma3);
873 break;
874 }
875 case 16: {
876 calc_planar_422(vv,buf,&vdma2,&vdma3);
877 break;
878 }
879 default: {
880 return -1;
881 }
882 }
883
884 if (V4L2_FIELD_HAS_BOTH(field)) {
885 } else if (field == V4L2_FIELD_ALTERNATE) {
886 /* fixme */
887 vdma1.base_odd = vdma1.prot_addr;
888 vdma1.pitch /= 2;
889 vdma2.base_odd = vdma2.prot_addr;
890 vdma2.pitch /= 2;
891 vdma3.base_odd = vdma3.prot_addr;
892 vdma3.pitch /= 2;
893 } else if (field == V4L2_FIELD_TOP) {
894 vdma1.base_odd = vdma1.prot_addr;
895 vdma1.pitch /= 2;
896 vdma2.base_odd = vdma2.prot_addr;
897 vdma2.pitch /= 2;
898 vdma3.base_odd = vdma3.prot_addr;
899 vdma3.pitch /= 2;
900 } else if (field == V4L2_FIELD_BOTTOM) {
901 vdma1.base_odd = vdma1.base_even;
902 vdma1.base_even = vdma1.prot_addr;
903 vdma1.pitch /= 2;
904 vdma2.base_odd = vdma2.base_even;
905 vdma2.base_even = vdma2.prot_addr;
906 vdma2.pitch /= 2;
907 vdma3.base_odd = vdma3.base_even;
908 vdma3.base_even = vdma3.prot_addr;
909 vdma3.pitch /= 2;
910 }
911
912 if( 0 != vv->vflip ) {
913 vdma1.pitch *= -1;
914 vdma2.pitch *= -1;
915 vdma3.pitch *= -1;
916 }
917
918 saa7146_write_out_dma(dev, 1, &vdma1);
919 if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
920 saa7146_write_out_dma(dev, 3, &vdma2);
921 saa7146_write_out_dma(dev, 2, &vdma3);
922 } else {
923 saa7146_write_out_dma(dev, 2, &vdma2);
924 saa7146_write_out_dma(dev, 3, &vdma3);
925 }
926 return 0;
927 }
928
929 static void program_capture_engine(struct saa7146_dev *dev, int planar)
930 {
931 struct saa7146_vv *vv = dev->vv_data;
932 int count = 0;
933
934 unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
935 unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
936
937 /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
938 WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
939 WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
940
941 /* set rps register 0 */
942 WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
943 WRITE_RPS0(MASK_27 | MASK_11);
944
945 /* turn on video-dma1 */
946 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
947 WRITE_RPS0(MASK_06 | MASK_22); /* => mask */
948 WRITE_RPS0(MASK_06 | MASK_22); /* => values */
949 if( 0 != planar ) {
950 /* turn on video-dma2 */
951 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
952 WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
953 WRITE_RPS0(MASK_05 | MASK_21); /* => values */
954
955 /* turn on video-dma3 */
956 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
957 WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
958 WRITE_RPS0(MASK_04 | MASK_20); /* => values */
959 }
960
961 /* wait for o_fid_a/b / e_fid_a/b toggle */
962 if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
963 WRITE_RPS0(CMD_PAUSE | o_wait);
964 WRITE_RPS0(CMD_PAUSE | e_wait);
965 } else if ( vv->last_field == V4L2_FIELD_TOP ) {
966 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
967 WRITE_RPS0(CMD_PAUSE | o_wait);
968 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
969 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
970 WRITE_RPS0(CMD_PAUSE | e_wait);
971 }
972
973 /* turn off video-dma1 */
974 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
975 WRITE_RPS0(MASK_22 | MASK_06); /* => mask */
976 WRITE_RPS0(MASK_22); /* => values */
977 if( 0 != planar ) {
978 /* turn off video-dma2 */
979 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
980 WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
981 WRITE_RPS0(MASK_21); /* => values */
982
983 /* turn off video-dma3 */
984 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
985 WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
986 WRITE_RPS0(MASK_20); /* => values */
987 }
988
989 /* generate interrupt */
990 WRITE_RPS0(CMD_INTERRUPT);
991
992 /* stop */
993 WRITE_RPS0(CMD_STOP);
994 }
995
996 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
997 {
998 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
999 struct saa7146_vv *vv = dev->vv_data;
1000 u32 vdma1_prot_addr;
1001
1002 DEB_CAP(("buf:%p, next:%p\n",buf,next));
1003
1004 vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
1005 if( 0 == vdma1_prot_addr ) {
1006 /* clear out beginning of streaming bit (rps register 0)*/
1007 DEB_CAP(("forcing sync to new frame\n"));
1008 saa7146_write(dev, MC2, MASK_27 );
1009 }
1010
1011 saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
1012 saa7146_set_output_format(dev, sfmt->trans);
1013 saa7146_disable_clipping(dev);
1014
1015 if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
1016 } else if ( vv->last_field == V4L2_FIELD_TOP ) {
1017 vv->last_field = V4L2_FIELD_BOTTOM;
1018 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
1019 vv->last_field = V4L2_FIELD_TOP;
1020 }
1021
1022 if( 0 != IS_PLANAR(sfmt->trans)) {
1023 calculate_video_dma_grab_planar(dev, buf);
1024 program_capture_engine(dev,1);
1025 } else {
1026 calculate_video_dma_grab_packed(dev, buf);
1027 program_capture_engine(dev,0);
1028 }
1029
1030 /*
1031 printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
1032 printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
1033 printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
1034 printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
1035 printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1));
1036 printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
1037 printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
1038 */
1039
1040 /* write the address of the rps-program */
1041 saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
1042
1043 /* turn on rps */
1044 saa7146_write(dev, MC1, (MASK_12 | MASK_28));
1045 }
linux-next