Merge remote-tracking branch 'moduleh/module.h-split'

[linux-2.6/next.git] / drivers / scsi / isci / phy.c

/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "isci.h"
#include "host.h"
#include "phy.h"
#include "scu_event_codes.h"
#include "probe_roms.h"

/* Maximum arbitration wait time in micro-seconds */
#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME  (700)

enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy)
{
        return iphy->max_negotiated_speed;
}

static enum sci_status
sci_phy_transport_layer_initialization(struct isci_phy *iphy,
                                       struct scu_transport_layer_registers __iomem *reg)
{
        u32 tl_control;

        iphy->transport_layer_registers = reg;

        writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
                &iphy->transport_layer_registers->stp_rni);

        /*
         * Hardware team recommends that we enable the STP prefetch for all
         * transports
         */
        tl_control = readl(&iphy->transport_layer_registers->control);
        tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
        writel(tl_control, &iphy->transport_layer_registers->control);

        return SCI_SUCCESS;
}

static enum sci_status
sci_phy_link_layer_initialization(struct isci_phy *iphy,
                                  struct scu_link_layer_registers __iomem *reg)
{
        struct isci_host *ihost = iphy->owning_port->owning_controller;
        int phy_idx = iphy->phy_index;
        struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx];
        struct sci_phy_oem_params *phy_oem =
                &ihost->oem_parameters.phys[phy_idx];
        u32 phy_configuration;
        struct sci_phy_cap phy_cap;
        u32 parity_check = 0;
        u32 parity_count = 0;
        u32 llctl, link_rate;
        u32 clksm_value = 0;
        u32 sp_timeouts = 0;

        iphy->link_layer_registers = reg;

        /* Set our IDENTIFY frame data */
        #define SCI_END_DEVICE 0x01

        writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
               SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
               SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
               &iphy->link_layer_registers->transmit_identification);

        /* Write the device SAS Address */
        writel(0xFEDCBA98,
               &iphy->link_layer_registers->sas_device_name_high);
        writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low);

        /* Write the source SAS Address */
        writel(phy_oem->sas_address.high,
                &iphy->link_layer_registers->source_sas_address_high);
        writel(phy_oem->sas_address.low,
                &iphy->link_layer_registers->source_sas_address_low);

        /* Clear and Set the PHY Identifier */
        writel(0, &iphy->link_layer_registers->identify_frame_phy_id);
        writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
                &iphy->link_layer_registers->identify_frame_phy_id);

        /* Change the initial state of the phy configuration register */
        phy_configuration =
                readl(&iphy->link_layer_registers->phy_configuration);

        /* Hold OOB state machine in reset */
        phy_configuration |=  SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        writel(phy_configuration,
                &iphy->link_layer_registers->phy_configuration);

        /* Configure the SNW capabilities */
        phy_cap.all = 0;
        phy_cap.start = 1;
        phy_cap.gen3_no_ssc = 1;
        phy_cap.gen2_no_ssc = 1;
        phy_cap.gen1_no_ssc = 1;
        if (ihost->oem_parameters.controller.do_enable_ssc == true) {
                phy_cap.gen3_ssc = 1;
                phy_cap.gen2_ssc = 1;
                phy_cap.gen1_ssc = 1;
        }

        /*
         * The SAS specification indicates that the phy_capabilities that
         * are transmitted shall have an even parity.  Calculate the parity. */
        parity_check = phy_cap.all;
        while (parity_check != 0) {
                if (parity_check & 0x1)
                        parity_count++;
                parity_check >>= 1;
        }

        /*
         * If parity indicates there are an odd number of bits set, then
         * set the parity bit to 1 in the phy capabilities. */
        if ((parity_count % 2) != 0)
                phy_cap.parity = 1;

        writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities);

        /* Set the enable spinup period but disable the ability to send
         * notify enable spinup
         */
        writel(SCU_ENSPINUP_GEN_VAL(COUNT,
                        phy_user->notify_enable_spin_up_insertion_frequency),
                &iphy->link_layer_registers->notify_enable_spinup_control);

        /* Write the ALIGN Insertion Ferequency for connected phy and
         * inpendent of connected state
         */
        clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
                        phy_user->in_connection_align_insertion_frequency);

        clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
                        phy_user->align_insertion_frequency);

        writel(clksm_value, &iphy->link_layer_registers->clock_skew_management);

        /* @todo Provide a way to write this register correctly */
        writel(0x02108421,
                &iphy->link_layer_registers->afe_lookup_table_control);

        llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
                (u8)ihost->user_parameters.no_outbound_task_timeout);

        switch (phy_user->max_speed_generation) {
        case SCIC_SDS_PARM_GEN3_SPEED:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
                break;
        case SCIC_SDS_PARM_GEN2_SPEED:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
                break;
        default:
                link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
                break;
        }
        llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
        writel(llctl, &iphy->link_layer_registers->link_layer_control);

        sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);

        /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
        sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);

        /* Set RATE_CHANGE timeout value to 0x3B (59us).  This ensures SCU can
         * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
         */
        sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);

        writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);

        if (is_a2(ihost->pdev)) {
                /* Program the max ARB time for the PHY to 700us so we inter-operate with
                 * the PMC expander which shuts down PHYs if the expander PHY generates too
                 * many breaks.  This time value will guarantee that the initiator PHY will
                 * generate the break.
                 */
                writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
                        &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
        }

        /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */
        writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout);

        /* We can exit the initial state to the stopped state */
        sci_change_state(&iphy->sm, SCI_PHY_STOPPED);

        return SCI_SUCCESS;
}

static void phy_sata_timeout(unsigned long data)
{
        struct sci_timer *tmr = (struct sci_timer *)data;
        struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer);
        struct isci_host *ihost = iphy->owning_port->owning_controller;
        unsigned long flags;

        spin_lock_irqsave(&ihost->scic_lock, flags);

        if (tmr->cancel)
                goto done;

        dev_dbg(sciphy_to_dev(iphy),
                 "%s: SCIC SDS Phy 0x%p did not receive signature fis before "
                 "timeout.\n",
                 __func__,
                 iphy);

        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
done:
        spin_unlock_irqrestore(&ihost->scic_lock, flags);
}

/**
 * This method returns the port currently containing this phy. If the phy is
 *    currently contained by the dummy port, then the phy is considered to not
 *    be part of a port.
 * @sci_phy: This parameter specifies the phy for which to retrieve the
 *    containing port.
 *
 * This method returns a handle to a port that contains the supplied phy.
 * NULL This value is returned if the phy is not part of a real
 * port (i.e. it's contained in the dummy port). !NULL All other
 * values indicate a handle/pointer to the port containing the phy.
 */
struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy)
{
        struct isci_port *iport = iphy->owning_port;

        if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT)
                return NULL;

        return iphy->owning_port;
}

/**
 * This method will assign a port to the phy object.
 * @out]: iphy This parameter specifies the phy for which to assign a port
 *    object.
 *
 *
 */
void sci_phy_set_port(
        struct isci_phy *iphy,
        struct isci_port *iport)
{
        iphy->owning_port = iport;

        if (iphy->bcn_received_while_port_unassigned) {
                iphy->bcn_received_while_port_unassigned = false;
                sci_port_broadcast_change_received(iphy->owning_port, iphy);
        }
}

enum sci_status sci_phy_initialize(struct isci_phy *iphy,
                                   struct scu_transport_layer_registers __iomem *tl,
                                   struct scu_link_layer_registers __iomem *ll)
{
        /* Perfrom the initialization of the TL hardware */
        sci_phy_transport_layer_initialization(iphy, tl);

        /* Perofrm the initialization of the PE hardware */
        sci_phy_link_layer_initialization(iphy, ll);

        /* There is nothing that needs to be done in this state just
         * transition to the stopped state
         */
        sci_change_state(&iphy->sm, SCI_PHY_STOPPED);

        return SCI_SUCCESS;
}

/**
 * This method assigns the direct attached device ID for this phy.
 *
 * @iphy The phy for which the direct attached device id is to
 *       be assigned.
 * @device_id The direct attached device ID to assign to the phy.
 *       This will either be the RNi for the device or an invalid RNi if there
 *       is no current device assigned to the phy.
 */
void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id)
{
        u32 tl_control;

        writel(device_id, &iphy->transport_layer_registers->stp_rni);

        /*
         * The read should guarantee that the first write gets posted
         * before the next write
         */
        tl_control = readl(&iphy->transport_layer_registers->control);
        tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
        writel(tl_control, &iphy->transport_layer_registers->control);
}

static void sci_phy_suspend(struct isci_phy *iphy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&iphy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
        writel(scu_sas_pcfg_value,
                &iphy->link_layer_registers->phy_configuration);

        sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
}

void sci_phy_resume(struct isci_phy *iphy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&iphy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
        writel(scu_sas_pcfg_value,
                &iphy->link_layer_registers->phy_configuration);
}

void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
{
        sas->high = readl(&iphy->link_layer_registers->source_sas_address_high);
        sas->low = readl(&iphy->link_layer_registers->source_sas_address_low);
}

void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
{
        struct sas_identify_frame *iaf;

        iaf = &iphy->frame_rcvd.iaf;
        memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE);
}

void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto)
{
        proto->all = readl(&iphy->link_layer_registers->transmit_identification);
}

enum sci_status sci_phy_start(struct isci_phy *iphy)
{
        enum sci_phy_states state = iphy->sm.current_state_id;

        if (state != SCI_PHY_STOPPED) {
                dev_dbg(sciphy_to_dev(iphy),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
        return SCI_SUCCESS;
}

enum sci_status sci_phy_stop(struct isci_phy *iphy)
{
        enum sci_phy_states state = iphy->sm.current_state_id;

        switch (state) {
        case SCI_PHY_SUB_INITIAL:
        case SCI_PHY_SUB_AWAIT_OSSP_EN:
        case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
        case SCI_PHY_SUB_AWAIT_SAS_POWER:
        case SCI_PHY_SUB_AWAIT_SATA_POWER:
        case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
        case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
        case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
        case SCI_PHY_SUB_FINAL:
        case SCI_PHY_READY:
                break;
        default:
                dev_dbg(sciphy_to_dev(iphy),
                        "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
        return SCI_SUCCESS;
}

enum sci_status sci_phy_reset(struct isci_phy *iphy)
{
        enum sci_phy_states state = iphy->sm.current_state_id;

        if (state != SCI_PHY_READY) {
                dev_dbg(sciphy_to_dev(iphy),
                        "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        sci_change_state(&iphy->sm, SCI_PHY_RESETTING);
        return SCI_SUCCESS;
}

enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy)
{
        enum sci_phy_states state = iphy->sm.current_state_id;

        switch (state) {
        case SCI_PHY_SUB_AWAIT_SAS_POWER: {
                u32 enable_spinup;

                enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
                enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
                writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control);

                /* Change state to the final state this substate machine has run to completion */
                sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);

                return SCI_SUCCESS;
        }
        case SCI_PHY_SUB_AWAIT_SATA_POWER: {
                u32 scu_sas_pcfg_value;

                /* Release the spinup hold state and reset the OOB state machine */
                scu_sas_pcfg_value =
                        readl(&iphy->link_layer_registers->phy_configuration);
                scu_sas_pcfg_value &=
                        ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
                scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
                writel(scu_sas_pcfg_value,
                        &iphy->link_layer_registers->phy_configuration);

                /* Now restart the OOB operation */
                scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
                scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
                writel(scu_sas_pcfg_value,
                        &iphy->link_layer_registers->phy_configuration);

                /* Change state to the final state this substate machine has run to completion */
                sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN);

                return SCI_SUCCESS;
        }
        default:
                dev_dbg(sciphy_to_dev(iphy),
                        "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

static void sci_phy_start_sas_link_training(struct isci_phy *iphy)
{
        /* continue the link training for the phy as if it were a SAS PHY
         * instead of a SATA PHY. This is done because the completion queue had a SAS
         * PHY DETECTED event when the state machine was expecting a SATA PHY event.
         */
        u32 phy_control;

        phy_control = readl(&iphy->link_layer_registers->phy_configuration);
        phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
        writel(phy_control,
               &iphy->link_layer_registers->phy_configuration);

        sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN);

        iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
}

static void sci_phy_start_sata_link_training(struct isci_phy *iphy)
{
        /* This method continues the link training for the phy as if it were a SATA PHY
         * instead of a SAS PHY.  This is done because the completion queue had a SATA
         * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
         */
        sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER);

        iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
}

/**
 * sci_phy_complete_link_training - perform processing common to
 *    all protocols upon completion of link training.
 * @sci_phy: This parameter specifies the phy object for which link training
 *    has completed.
 * @max_link_rate: This parameter specifies the maximum link rate to be
 *    associated with this phy.
 * @next_state: This parameter specifies the next state for the phy's starting
 *    sub-state machine.
 *
 */
static void sci_phy_complete_link_training(struct isci_phy *iphy,
                                           enum sas_linkrate max_link_rate,
                                           u32 next_state)
{
        iphy->max_negotiated_speed = max_link_rate;

        sci_change_state(&iphy->sm, next_state);
}

enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
{
        enum sci_phy_states state = iphy->sm.current_state_id;

        switch (state) {
        case SCI_PHY_SUB_AWAIT_OSSP_EN:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_SAS_PHY_DETECTED:
                        sci_phy_start_sas_link_training(iphy);
                        iphy->is_in_link_training = true;
                        break;
                case SCU_EVENT_SATA_SPINUP_HOLD:
                        sci_phy_start_sata_link_training(iphy);
                        iphy->is_in_link_training = true;
                        break;
                default:
                        dev_dbg(sciphy_to_dev(iphy),
                                "%s: PHY starting substate machine received "
                                "unexpected event_code %x\n",
                                __func__,
                                event_code);
                        return SCI_FAILURE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_SAS_PHY_DETECTED:
                        /*
                         * Why is this being reported again by the controller?
                         * We would re-enter this state so just stay here */
                        break;
                case SCU_EVENT_SAS_15:
                case SCU_EVENT_SAS_15_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
                                                       SCI_PHY_SUB_AWAIT_IAF_UF);
                        break;
                case SCU_EVENT_SAS_30:
                case SCU_EVENT_SAS_30_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
                                                       SCI_PHY_SUB_AWAIT_IAF_UF);
                        break;
                case SCU_EVENT_SAS_60:
                case SCU_EVENT_SAS_60_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
                                                       SCI_PHY_SUB_AWAIT_IAF_UF);
                        break;
                case SCU_EVENT_SATA_SPINUP_HOLD:
                        /*
                         * We were doing SAS PHY link training and received a SATA PHY event
                         * continue OOB/SN as if this were a SATA PHY */
                        sci_phy_start_sata_link_training(iphy);
                        break;
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__, event_code);

                        return SCI_FAILURE;
                        break;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_IAF_UF:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_SAS_PHY_DETECTED:
                        /* Backup the state machine */
                        sci_phy_start_sas_link_training(iphy);
                        break;
                case SCU_EVENT_SATA_SPINUP_HOLD:
                        /* We were doing SAS PHY link training and received a
                         * SATA PHY event continue OOB/SN as if this were a
                         * SATA PHY
                         */
                        sci_phy_start_sata_link_training(iphy);
                        break;
                case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
                case SCU_EVENT_LINK_FAILURE:
                case SCU_EVENT_HARD_RESET_RECEIVED:
                        /* Start the oob/sn state machine over again */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__, event_code);
                        return SCI_FAILURE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SAS_POWER:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                "%s: PHY starting substate machine received unexpected "
                                "event_code %x\n",
                                __func__,
                                event_code);
                        return SCI_FAILURE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SATA_POWER:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                case SCU_EVENT_SATA_SPINUP_HOLD:
                        /* These events are received every 10ms and are
                         * expected while in this state
                         */
                        break;

                case SCU_EVENT_SAS_PHY_DETECTED:
                        /* There has been a change in the phy type before OOB/SN for the
                         * SATA finished start down the SAS link traning path.
                         */
                        sci_phy_start_sas_link_training(iphy);
                        break;

                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__, event_code);

                        return SCI_FAILURE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                case SCU_EVENT_SATA_SPINUP_HOLD:
                        /* These events might be received since we dont know how many may be in
                         * the completion queue while waiting for power
                         */
                        break;
                case SCU_EVENT_SATA_PHY_DETECTED:
                        iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;

                        /* We have received the SATA PHY notification change state */
                        sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
                        break;
                case SCU_EVENT_SAS_PHY_DETECTED:
                        /* There has been a change in the phy type before OOB/SN for the
                         * SATA finished start down the SAS link traning path.
                         */
                        sci_phy_start_sas_link_training(iphy);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__,
                                 event_code);

                        return SCI_FAILURE;;
                }
                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_SATA_PHY_DETECTED:
                        /*
                         * The hardware reports multiple SATA PHY detected events
                         * ignore the extras */
                        break;
                case SCU_EVENT_SATA_15:
                case SCU_EVENT_SATA_15_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
                                                       SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
                        break;
                case SCU_EVENT_SATA_30:
                case SCU_EVENT_SATA_30_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
                                                       SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
                        break;
                case SCU_EVENT_SATA_60:
                case SCU_EVENT_SATA_60_SSC:
                        sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
                                                       SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
                        break;
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                case SCU_EVENT_SAS_PHY_DETECTED:
                        /*
                         * There has been a change in the phy type before OOB/SN for the
                         * SATA finished start down the SAS link traning path. */
                        sci_phy_start_sas_link_training(iphy);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__, event_code);

                        return SCI_FAILURE;
                }

                return SCI_SUCCESS;
        case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_SATA_PHY_DETECTED:
                        /* Backup the state machine */
                        sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
                        break;

                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;

                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected event_code %x\n",
                                 __func__,
                                 event_code);

                        return SCI_FAILURE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_READY:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_LINK_FAILURE:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                case SCU_EVENT_BROADCAST_CHANGE:
                        /* Broadcast change received. Notify the port. */
                        if (phy_get_non_dummy_port(iphy) != NULL)
                                sci_port_broadcast_change_received(iphy->owning_port, iphy);
                        else
                                iphy->bcn_received_while_port_unassigned = true;
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%sP SCIC PHY 0x%p ready state machine received "
                                 "unexpected event_code %x\n",
                                 __func__, iphy, event_code);
                        return SCI_FAILURE_INVALID_STATE;
                }
                return SCI_SUCCESS;
        case SCI_PHY_RESETTING:
                switch (scu_get_event_code(event_code)) {
                case SCU_EVENT_HARD_RESET_TRANSMITTED:
                        /* Link failure change state back to the starting state */
                        sci_change_state(&iphy->sm, SCI_PHY_STARTING);
                        break;
                default:
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: SCIC PHY 0x%p resetting state machine received "
                                 "unexpected event_code %x\n",
                                 __func__, iphy, event_code);

                        return SCI_FAILURE_INVALID_STATE;
                        break;
                }
                return SCI_SUCCESS;
        default:
                dev_dbg(sciphy_to_dev(iphy),
                        "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index)
{
        enum sci_phy_states state = iphy->sm.current_state_id;
        struct isci_host *ihost = iphy->owning_port->owning_controller;
        enum sci_status result;
        unsigned long flags;

        switch (state) {
        case SCI_PHY_SUB_AWAIT_IAF_UF: {
                u32 *frame_words;
                struct sas_identify_frame iaf;

                result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
                                                                  frame_index,
                                                                  (void **)&frame_words);

                if (result != SCI_SUCCESS)
                        return result;

                sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
                if (iaf.frame_type == 0) {
                        u32 state;

                        spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
                        memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
                        spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
                        if (iaf.smp_tport) {
                                /* We got the IAF for an expander PHY go to the final
                                 * state since there are no power requirements for
                                 * expander phys.
                                 */
                                state = SCI_PHY_SUB_FINAL;
                        } else {
                                /* We got the IAF we can now go to the await spinup
                                 * semaphore state
                                 */
                                state = SCI_PHY_SUB_AWAIT_SAS_POWER;
                        }
                        sci_change_state(&iphy->sm, state);
                        result = SCI_SUCCESS;
                } else
                        dev_warn(sciphy_to_dev(iphy),
                                "%s: PHY starting substate machine received "
                                "unexpected frame id %x\n",
                                __func__, frame_index);

                sci_controller_release_frame(ihost, frame_index);
                return result;
        }
        case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: {
                struct dev_to_host_fis *frame_header;
                u32 *fis_frame_data;

                result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
                                                                  frame_index,
                                                                  (void **)&frame_header);

                if (result != SCI_SUCCESS)
                        return result;

                if ((frame_header->fis_type == FIS_REGD2H) &&
                    !(frame_header->status & ATA_BUSY)) {
                        sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
                                                                 frame_index,
                                                                 (void **)&fis_frame_data);

                        spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
                        sci_controller_copy_sata_response(&iphy->frame_rcvd.fis,
                                                          frame_header,
                                                          fis_frame_data);
                        spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);

                        /* got IAF we can now go to the await spinup semaphore state */
                        sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);

                        result = SCI_SUCCESS;
                } else
                        dev_warn(sciphy_to_dev(iphy),
                                 "%s: PHY starting substate machine received "
                                 "unexpected frame id %x\n",
                                 __func__, frame_index);

                /* Regardless of the result we are done with this frame with it */
                sci_controller_release_frame(ihost, frame_index);

                return result;
        }
        default:
                dev_dbg(sciphy_to_dev(iphy),
                        "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

}

static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        /* This is just an temporary state go off to the starting state */
        sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN);
}

static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_host *ihost = iphy->owning_port->owning_controller;

        sci_controller_power_control_queue_insert(ihost, iphy);
}

static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_host *ihost = iphy->owning_port->owning_controller;

        sci_controller_power_control_queue_remove(ihost, iphy);
}

static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_host *ihost = iphy->owning_port->owning_controller;

        sci_controller_power_control_queue_insert(ihost, iphy);
}

static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_host *ihost = iphy->owning_port->owning_controller;

        sci_controller_power_control_queue_remove(ihost, iphy);
}

static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}

static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_del_timer(&iphy->sata_timer);
}

static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
}

static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_del_timer(&iphy->sata_timer);
}

static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        if (sci_port_link_detected(iphy->owning_port, iphy)) {

                /*
                 * Clear the PE suspend condition so we can actually
                 * receive SIG FIS
                 * The hardware will not respond to the XRDY until the PE
                 * suspend condition is cleared.
                 */
                sci_phy_resume(iphy);

                sci_mod_timer(&iphy->sata_timer,
                              SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
        } else
                iphy->is_in_link_training = false;
}

static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_del_timer(&iphy->sata_timer);
}

static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        /* State machine has run to completion so exit out and change
         * the base state machine to the ready state
         */
        sci_change_state(&iphy->sm, SCI_PHY_READY);
}

/**
 *
 * @sci_phy: This is the struct isci_phy object to stop.
 *
 * This method will stop the struct isci_phy object. This does not reset the
 * protocol engine it just suspends it and places it in a state where it will
 * not cause the end device to power up. none
 */
static void scu_link_layer_stop_protocol_engine(
        struct isci_phy *iphy)
{
        u32 scu_sas_pcfg_value;
        u32 enable_spinup_value;

        /* Suspend the protocol engine and place it in a sata spinup hold state */
        scu_sas_pcfg_value =
                readl(&iphy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |=
                (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
                 SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
                 SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
        writel(scu_sas_pcfg_value,
               &iphy->link_layer_registers->phy_configuration);

        /* Disable the notify enable spinup primitives */
        enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
        enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
        writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control);
}

/**
 *
 *
 * This method will start the OOB/SN state machine for this struct isci_phy object.
 */
static void scu_link_layer_start_oob(
        struct isci_phy *iphy)
{
        u32 scu_sas_pcfg_value;

        scu_sas_pcfg_value =
                readl(&iphy->link_layer_registers->phy_configuration);
        scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
        scu_sas_pcfg_value &=
                ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
                SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
        writel(scu_sas_pcfg_value,
               &iphy->link_layer_registers->phy_configuration);
}

/**
 *
 *
 * This method will transmit a hard reset request on the specified phy. The SCU
 * hardware requires that we reset the OOB state machine and set the hard reset
 * bit in the phy configuration register. We then must start OOB over with the
 * hard reset bit set.
 */
static void scu_link_layer_tx_hard_reset(
        struct isci_phy *iphy)
{
        u32 phy_configuration_value;

        /*
         * SAS Phys must wait for the HARD_RESET_TX event notification to transition
         * to the starting state. */
        phy_configuration_value =
                readl(&iphy->link_layer_registers->phy_configuration);
        phy_configuration_value |=
                (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
                 SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
        writel(phy_configuration_value,
               &iphy->link_layer_registers->phy_configuration);

        /* Now take the OOB state machine out of reset */
        phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
        phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
        writel(phy_configuration_value,
               &iphy->link_layer_registers->phy_configuration);
}

static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_port *iport = iphy->owning_port;
        struct isci_host *ihost = iport->owning_controller;

        /*
         * @todo We need to get to the controller to place this PE in a
         * reset state
         */
        sci_del_timer(&iphy->sata_timer);

        scu_link_layer_stop_protocol_engine(iphy);

        if (iphy->sm.previous_state_id != SCI_PHY_INITIAL)
                sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);
}

static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_port *iport = iphy->owning_port;
        struct isci_host *ihost = iport->owning_controller;

        scu_link_layer_stop_protocol_engine(iphy);
        scu_link_layer_start_oob(iphy);

        /* We don't know what kind of phy we are going to be just yet */
        iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
        iphy->bcn_received_while_port_unassigned = false;

        if (iphy->sm.previous_state_id == SCI_PHY_READY)
                sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);

        sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL);
}

static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
        struct isci_port *iport = iphy->owning_port;
        struct isci_host *ihost = iport->owning_controller;

        sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy);
}

static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        sci_phy_suspend(iphy);
}

static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm)
{
        struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);

        /* The phy is being reset, therefore deactivate it from the port.  In
         * the resetting state we don't notify the user regarding link up and
         * link down notifications
         */
        sci_port_deactivate_phy(iphy->owning_port, iphy, false);

        if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
                scu_link_layer_tx_hard_reset(iphy);
        } else {
                /* The SCU does not need to have a discrete reset state so
                 * just go back to the starting state.
                 */
                sci_change_state(&iphy->sm, SCI_PHY_STARTING);
        }
}

static const struct sci_base_state sci_phy_state_table[] = {
        [SCI_PHY_INITIAL] = { },
        [SCI_PHY_STOPPED] = {
                .enter_state = sci_phy_stopped_state_enter,
        },
        [SCI_PHY_STARTING] = {
                .enter_state = sci_phy_starting_state_enter,
        },
        [SCI_PHY_SUB_INITIAL] = {
                .enter_state = sci_phy_starting_initial_substate_enter,
        },
        [SCI_PHY_SUB_AWAIT_OSSP_EN] = { },
        [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { },
        [SCI_PHY_SUB_AWAIT_IAF_UF] = { },
        [SCI_PHY_SUB_AWAIT_SAS_POWER] = {
                .enter_state = sci_phy_starting_await_sas_power_substate_enter,
                .exit_state  = sci_phy_starting_await_sas_power_substate_exit,
        },
        [SCI_PHY_SUB_AWAIT_SATA_POWER] = {
                .enter_state = sci_phy_starting_await_sata_power_substate_enter,
                .exit_state  = sci_phy_starting_await_sata_power_substate_exit
        },
        [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = {
                .enter_state = sci_phy_starting_await_sata_phy_substate_enter,
                .exit_state  = sci_phy_starting_await_sata_phy_substate_exit
        },
        [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = {
                .enter_state = sci_phy_starting_await_sata_speed_substate_enter,
                .exit_state  = sci_phy_starting_await_sata_speed_substate_exit
        },
        [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = {
                .enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter,
                .exit_state  = sci_phy_starting_await_sig_fis_uf_substate_exit
        },
        [SCI_PHY_SUB_FINAL] = {
                .enter_state = sci_phy_starting_final_substate_enter,
        },
        [SCI_PHY_READY] = {
                .enter_state = sci_phy_ready_state_enter,
                .exit_state = sci_phy_ready_state_exit,
        },
        [SCI_PHY_RESETTING] = {
                .enter_state = sci_phy_resetting_state_enter,
        },
        [SCI_PHY_FINAL] = { },
};

void sci_phy_construct(struct isci_phy *iphy,
                            struct isci_port *iport, u8 phy_index)
{
        sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL);

        /* Copy the rest of the input data to our locals */
        iphy->owning_port = iport;
        iphy->phy_index = phy_index;
        iphy->bcn_received_while_port_unassigned = false;
        iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
        iphy->link_layer_registers = NULL;
        iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;

        /* Create the SIGNATURE FIS Timeout timer for this phy */
        sci_init_timer(&iphy->sata_timer, phy_sata_timeout);
}

void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index)
{
        struct sci_oem_params *oem = &ihost->oem_parameters;
        u64 sci_sas_addr;
        __be64 sas_addr;

        sci_sas_addr = oem->phys[index].sas_address.high;
        sci_sas_addr <<= 32;
        sci_sas_addr |= oem->phys[index].sas_address.low;
        sas_addr = cpu_to_be64(sci_sas_addr);
        memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr));

        iphy->isci_port = NULL;
        iphy->sas_phy.enabled = 0;
        iphy->sas_phy.id = index;
        iphy->sas_phy.sas_addr = &iphy->sas_addr[0];
        iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd;
        iphy->sas_phy.ha = &ihost->sas_ha;
        iphy->sas_phy.lldd_phy = iphy;
        iphy->sas_phy.enabled = 1;
        iphy->sas_phy.class = SAS;
        iphy->sas_phy.iproto = SAS_PROTOCOL_ALL;
        iphy->sas_phy.tproto = 0;
        iphy->sas_phy.type = PHY_TYPE_PHYSICAL;
        iphy->sas_phy.role = PHY_ROLE_INITIATOR;
        iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED;
        iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN;
        memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd));
}


/**
 * isci_phy_control() - This function is one of the SAS Domain Template
 *    functions. This is a phy management function.
 * @phy: This parameter specifies the sphy being controlled.
 * @func: This parameter specifies the phy control function being invoked.
 * @buf: This parameter is specific to the phy function being invoked.
 *
 * status, zero indicates success.
 */
int isci_phy_control(struct asd_sas_phy *sas_phy,
                     enum phy_func func,
                     void *buf)
{
        int ret = 0;
        struct isci_phy *iphy = sas_phy->lldd_phy;
        struct isci_port *iport = iphy->isci_port;
        struct isci_host *ihost = sas_phy->ha->lldd_ha;
        unsigned long flags;

        dev_dbg(&ihost->pdev->dev,
                "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n",
                __func__, sas_phy, func, buf, iphy, iport);

        switch (func) {
        case PHY_FUNC_DISABLE:
                spin_lock_irqsave(&ihost->scic_lock, flags);
                sci_phy_stop(iphy);
                spin_unlock_irqrestore(&ihost->scic_lock, flags);
                break;

        case PHY_FUNC_LINK_RESET:
                spin_lock_irqsave(&ihost->scic_lock, flags);
                sci_phy_stop(iphy);
                sci_phy_start(iphy);
                spin_unlock_irqrestore(&ihost->scic_lock, flags);
                break;

        case PHY_FUNC_HARD_RESET:
                if (!iport)
                        return -ENODEV;

                /* Perform the port reset. */
                ret = isci_port_perform_hard_reset(ihost, iport, iphy);

                break;

        default:
                dev_dbg(&ihost->pdev->dev,
                           "%s: phy %p; func %d NOT IMPLEMENTED!\n",
                           __func__, sas_phy, func);
                ret = -ENOSYS;
                break;
        }
        return ret;
}