?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / drivers / staging / tm6000 / tm6000-cards.c
blob9227db5d8955444f9049bf49dd634e243a9f50f7
1 /*
2 * tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
3 *
4 * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation version 2
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 #include <linux/init.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/delay.h>
24 #include <linux/i2c.h>
25 #include <linux/usb.h>
26 #include <linux/slab.h>
27 #include <media/v4l2-common.h>
28 #include <media/tuner.h>
29 #include <media/tvaudio.h>
30 #include <media/i2c-addr.h>
31 #include <media/rc-map.h>
32
33 #include "tm6000.h"
34 #include "tm6000-regs.h"
35 #include "tuner-xc2028.h"
36 #include "xc5000.h"
37
38 #define TM6000_BOARD_UNKNOWN 0
39 #define TM5600_BOARD_GENERIC 1
40 #define TM6000_BOARD_GENERIC 2
41 #define TM6010_BOARD_GENERIC 3
42 #define TM5600_BOARD_10MOONS_UT821 4
43 #define TM5600_BOARD_10MOONS_UT330 5
44 #define TM6000_BOARD_ADSTECH_DUAL_TV 6
45 #define TM6000_BOARD_FREECOM_AND_SIMILAR 7
46 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
47 #define TM6010_BOARD_HAUPPAUGE_900H 9
48 #define TM6010_BOARD_BEHOLD_WANDER 10
49 #define TM6010_BOARD_BEHOLD_VOYAGER 11
50 #define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
51 #define TM6010_BOARD_TWINHAN_TU501 13
52 #define TM6010_BOARD_BEHOLD_WANDER_LITE 14
53 #define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15
54 #define TM5600_BOARD_TERRATEC_GRABSTER 16
55
56 #define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
57 (model == TM5600_BOARD_GENERIC) || \
58 (model == TM6000_BOARD_GENERIC) || \
59 (model == TM6010_BOARD_GENERIC))
60
61 #define TM6000_MAXBOARDS 16
62 static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
63
64 module_param_array(card, int, NULL, 0444);
65
66 static unsigned long tm6000_devused;
67
68
69 struct tm6000_board {
70 char *name;
71 char eename[16]; /* EEPROM name */
72 unsigned eename_size; /* size of EEPROM name */
73 unsigned eename_pos; /* Position where it appears at ROM */
74
75 struct tm6000_capabilities caps;
76
77 enum tm6000_devtype type; /* variant of the chipset */
78 int tuner_type; /* type of the tuner */
79 int tuner_addr; /* tuner address */
80 int demod_addr; /* demodulator address */
81
82 struct tm6000_gpio gpio;
83
84 struct tm6000_input vinput[3];
85 struct tm6000_input rinput;
86
87 char *ir_codes;
88 };
89
90 struct tm6000_board tm6000_boards[] = {
91 [TM6000_BOARD_UNKNOWN] = {
92 .name = "Unknown tm6000 video grabber",
93 .caps = {
94 .has_tuner = 1,
95 .has_eeprom = 1,
96 },
97 .gpio = {
98 .tuner_reset = TM6000_GPIO_1,
99 },
100 .vinput = { {
101 .type = TM6000_INPUT_TV,
102 .vmux = TM6000_VMUX_VIDEO_B,
103 .amux = TM6000_AMUX_ADC1,
104 }, {
105 .type = TM6000_INPUT_COMPOSITE1,
106 .vmux = TM6000_VMUX_VIDEO_A,
107 .amux = TM6000_AMUX_ADC2,
108 }, {
109 .type = TM6000_INPUT_SVIDEO,
110 .vmux = TM6000_VMUX_VIDEO_AB,
111 .amux = TM6000_AMUX_ADC2,
112 },
113 },
114 },
115 [TM5600_BOARD_GENERIC] = {
116 .name = "Generic tm5600 board",
117 .type = TM5600,
118 .tuner_type = TUNER_XC2028,
119 .tuner_addr = 0xc2 >> 1,
120 .caps = {
121 .has_tuner = 1,
122 .has_eeprom = 1,
123 },
124 .gpio = {
125 .tuner_reset = TM6000_GPIO_1,
126 },
127 .vinput = { {
128 .type = TM6000_INPUT_TV,
129 .vmux = TM6000_VMUX_VIDEO_B,
130 .amux = TM6000_AMUX_ADC1,
131 }, {
132 .type = TM6000_INPUT_COMPOSITE1,
133 .vmux = TM6000_VMUX_VIDEO_A,
134 .amux = TM6000_AMUX_ADC2,
135 }, {
136 .type = TM6000_INPUT_SVIDEO,
137 .vmux = TM6000_VMUX_VIDEO_AB,
138 .amux = TM6000_AMUX_ADC2,
139 },
140 },
141 },
142 [TM6000_BOARD_GENERIC] = {
143 .name = "Generic tm6000 board",
144 .tuner_type = TUNER_XC2028,
145 .tuner_addr = 0xc2 >> 1,
146 .caps = {
147 .has_tuner = 1,
148 .has_eeprom = 1,
149 },
150 .gpio = {
151 .tuner_reset = TM6000_GPIO_1,
152 },
153 .vinput = { {
154 .type = TM6000_INPUT_TV,
155 .vmux = TM6000_VMUX_VIDEO_B,
156 .amux = TM6000_AMUX_ADC1,
157 }, {
158 .type = TM6000_INPUT_COMPOSITE1,
159 .vmux = TM6000_VMUX_VIDEO_A,
160 .amux = TM6000_AMUX_ADC2,
161 }, {
162 .type = TM6000_INPUT_SVIDEO,
163 .vmux = TM6000_VMUX_VIDEO_AB,
164 .amux = TM6000_AMUX_ADC2,
165 },
166 },
167 },
168 [TM6010_BOARD_GENERIC] = {
169 .name = "Generic tm6010 board",
170 .type = TM6010,
171 .tuner_type = TUNER_XC2028,
172 .tuner_addr = 0xc2 >> 1,
173 .demod_addr = 0x1e >> 1,
174 .caps = {
175 .has_tuner = 1,
176 .has_dvb = 1,
177 .has_zl10353 = 1,
178 .has_eeprom = 1,
179 .has_remote = 1,
180 },
181 .gpio = {
182 .tuner_reset = TM6010_GPIO_2,
183 .tuner_on = TM6010_GPIO_3,
184 .demod_reset = TM6010_GPIO_1,
185 .demod_on = TM6010_GPIO_4,
186 .power_led = TM6010_GPIO_7,
187 .dvb_led = TM6010_GPIO_5,
188 .ir = TM6010_GPIO_0,
189 },
190 .vinput = { {
191 .type = TM6000_INPUT_TV,
192 .vmux = TM6000_VMUX_VIDEO_B,
193 .amux = TM6000_AMUX_SIF1,
194 }, {
195 .type = TM6000_INPUT_COMPOSITE1,
196 .vmux = TM6000_VMUX_VIDEO_A,
197 .amux = TM6000_AMUX_ADC2,
198 }, {
199 .type = TM6000_INPUT_SVIDEO,
200 .vmux = TM6000_VMUX_VIDEO_AB,
201 .amux = TM6000_AMUX_ADC2,
202 },
203 },
204 },
205 [TM5600_BOARD_10MOONS_UT821] = {
206 .name = "10Moons UT 821",
207 .tuner_type = TUNER_XC2028,
208 .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
209 .eename_size = 14,
210 .eename_pos = 0x14,
211 .type = TM5600,
212 .tuner_addr = 0xc2 >> 1,
213 .caps = {
214 .has_tuner = 1,
215 .has_eeprom = 1,
216 },
217 .gpio = {
218 .tuner_reset = TM6000_GPIO_1,
219 },
220 .vinput = { {
221 .type = TM6000_INPUT_TV,
222 .vmux = TM6000_VMUX_VIDEO_B,
223 .amux = TM6000_AMUX_ADC1,
224 }, {
225 .type = TM6000_INPUT_COMPOSITE1,
226 .vmux = TM6000_VMUX_VIDEO_A,
227 .amux = TM6000_AMUX_ADC2,
228 }, {
229 .type = TM6000_INPUT_SVIDEO,
230 .vmux = TM6000_VMUX_VIDEO_AB,
231 .amux = TM6000_AMUX_ADC2,
232 },
233 },
234 },
235 [TM5600_BOARD_10MOONS_UT330] = {
236 .name = "10Moons UT 330",
237 .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
238 .tuner_addr = 0xc8 >> 1,
239 .caps = {
240 .has_tuner = 1,
241 .has_dvb = 0,
242 .has_zl10353 = 0,
243 .has_eeprom = 1,
244 },
245 .vinput = { {
246 .type = TM6000_INPUT_TV,
247 .vmux = TM6000_VMUX_VIDEO_B,
248 .amux = TM6000_AMUX_ADC1,
249 }, {
250 .type = TM6000_INPUT_COMPOSITE1,
251 .vmux = TM6000_VMUX_VIDEO_A,
252 .amux = TM6000_AMUX_ADC2,
253 }, {
254 .type = TM6000_INPUT_SVIDEO,
255 .vmux = TM6000_VMUX_VIDEO_AB,
256 .amux = TM6000_AMUX_ADC2,
257 },
258 },
259 },
260 [TM6000_BOARD_ADSTECH_DUAL_TV] = {
261 .name = "ADSTECH Dual TV USB",
262 .tuner_type = TUNER_XC2028,
263 .tuner_addr = 0xc8 >> 1,
264 .caps = {
265 .has_tuner = 1,
266 .has_tda9874 = 1,
267 .has_dvb = 1,
268 .has_zl10353 = 1,
269 .has_eeprom = 1,
270 },
271 .vinput = { {
272 .type = TM6000_INPUT_TV,
273 .vmux = TM6000_VMUX_VIDEO_B,
274 .amux = TM6000_AMUX_ADC1,
275 }, {
276 .type = TM6000_INPUT_COMPOSITE1,
277 .vmux = TM6000_VMUX_VIDEO_A,
278 .amux = TM6000_AMUX_ADC2,
279 }, {
280 .type = TM6000_INPUT_SVIDEO,
281 .vmux = TM6000_VMUX_VIDEO_AB,
282 .amux = TM6000_AMUX_ADC2,
283 },
284 },
285 },
286 [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
287 .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
288 .tuner_type = TUNER_XC2028, /* has a XC3028 */
289 .tuner_addr = 0xc2 >> 1,
290 .demod_addr = 0x1e >> 1,
291 .caps = {
292 .has_tuner = 1,
293 .has_dvb = 1,
294 .has_zl10353 = 1,
295 .has_eeprom = 0,
296 .has_remote = 1,
297 },
298 .gpio = {
299 .tuner_reset = TM6000_GPIO_4,
300 },
301 .vinput = { {
302 .type = TM6000_INPUT_TV,
303 .vmux = TM6000_VMUX_VIDEO_B,
304 .amux = TM6000_AMUX_ADC1,
305 }, {
306 .type = TM6000_INPUT_COMPOSITE1,
307 .vmux = TM6000_VMUX_VIDEO_A,
308 .amux = TM6000_AMUX_ADC2,
309 }, {
310 .type = TM6000_INPUT_SVIDEO,
311 .vmux = TM6000_VMUX_VIDEO_AB,
312 .amux = TM6000_AMUX_ADC2,
313 },
314 },
315 },
316 [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
317 .name = "ADSTECH Mini Dual TV USB",
318 .tuner_type = TUNER_XC2028, /* has a XC3028 */
319 .tuner_addr = 0xc8 >> 1,
320 .demod_addr = 0x1e >> 1,
321 .caps = {
322 .has_tuner = 1,
323 .has_dvb = 1,
324 .has_zl10353 = 1,
325 .has_eeprom = 0,
326 },
327 .gpio = {
328 .tuner_reset = TM6000_GPIO_4,
329 },
330 .vinput = { {
331 .type = TM6000_INPUT_TV,
332 .vmux = TM6000_VMUX_VIDEO_B,
333 .amux = TM6000_AMUX_ADC1,
334 }, {
335 .type = TM6000_INPUT_COMPOSITE1,
336 .vmux = TM6000_VMUX_VIDEO_A,
337 .amux = TM6000_AMUX_ADC2,
338 }, {
339 .type = TM6000_INPUT_SVIDEO,
340 .vmux = TM6000_VMUX_VIDEO_AB,
341 .amux = TM6000_AMUX_ADC2,
342 },
343 },
344 },
345 [TM6010_BOARD_HAUPPAUGE_900H] = {
346 .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
347 .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
348 .eename_size = 14,
349 .eename_pos = 0x42,
350 .tuner_type = TUNER_XC2028, /* has a XC3028 */
351 .tuner_addr = 0xc2 >> 1,
352 .demod_addr = 0x1e >> 1,
353 .type = TM6010,
354 .caps = {
355 .has_tuner = 1,
356 .has_dvb = 1,
357 .has_zl10353 = 1,
358 .has_eeprom = 1,
359 .has_remote = 1,
360 },
361 .gpio = {
362 .tuner_reset = TM6010_GPIO_2,
363 .tuner_on = TM6010_GPIO_3,
364 .demod_reset = TM6010_GPIO_1,
365 .demod_on = TM6010_GPIO_4,
366 .power_led = TM6010_GPIO_7,
367 .dvb_led = TM6010_GPIO_5,
368 .ir = TM6010_GPIO_0,
369 },
370 .vinput = { {
371 .type = TM6000_INPUT_TV,
372 .vmux = TM6000_VMUX_VIDEO_B,
373 .amux = TM6000_AMUX_SIF1,
374 }, {
375 .type = TM6000_INPUT_COMPOSITE1,
376 .vmux = TM6000_VMUX_VIDEO_A,
377 .amux = TM6000_AMUX_ADC2,
378 }, {
379 .type = TM6000_INPUT_SVIDEO,
380 .vmux = TM6000_VMUX_VIDEO_AB,
381 .amux = TM6000_AMUX_ADC2,
382 },
383 },
384 },
385 [TM6010_BOARD_BEHOLD_WANDER] = {
386 .name = "Beholder Wander DVB-T/TV/FM USB2.0",
387 .tuner_type = TUNER_XC5000,
388 .tuner_addr = 0xc2 >> 1,
389 .demod_addr = 0x1e >> 1,
390 .type = TM6010,
391 .caps = {
392 .has_tuner = 1,
393 .has_dvb = 1,
394 .has_zl10353 = 1,
395 .has_eeprom = 1,
396 .has_remote = 1,
397 .has_radio = 1.
398 },
399 .gpio = {
400 .tuner_reset = TM6010_GPIO_0,
401 .demod_reset = TM6010_GPIO_1,
402 .power_led = TM6010_GPIO_6,
403 },
404 .vinput = { {
405 .type = TM6000_INPUT_TV,
406 .vmux = TM6000_VMUX_VIDEO_B,
407 .amux = TM6000_AMUX_SIF1,
408 }, {
409 .type = TM6000_INPUT_COMPOSITE1,
410 .vmux = TM6000_VMUX_VIDEO_A,
411 .amux = TM6000_AMUX_ADC2,
412 }, {
413 .type = TM6000_INPUT_SVIDEO,
414 .vmux = TM6000_VMUX_VIDEO_AB,
415 .amux = TM6000_AMUX_ADC2,
416 },
417 },
418 .rinput = {
419 .type = TM6000_INPUT_RADIO,
420 .amux = TM6000_AMUX_ADC1,
421 },
422 },
423 [TM6010_BOARD_BEHOLD_VOYAGER] = {
424 .name = "Beholder Voyager TV/FM USB2.0",
425 .tuner_type = TUNER_XC5000,
426 .tuner_addr = 0xc2 >> 1,
427 .type = TM6010,
428 .caps = {
429 .has_tuner = 1,
430 .has_dvb = 0,
431 .has_zl10353 = 0,
432 .has_eeprom = 1,
433 .has_remote = 1,
434 .has_radio = 1,
435 },
436 .gpio = {
437 .tuner_reset = TM6010_GPIO_0,
438 .power_led = TM6010_GPIO_6,
439 },
440 .vinput = { {
441 .type = TM6000_INPUT_TV,
442 .vmux = TM6000_VMUX_VIDEO_B,
443 .amux = TM6000_AMUX_SIF1,
444 }, {
445 .type = TM6000_INPUT_COMPOSITE1,
446 .vmux = TM6000_VMUX_VIDEO_A,
447 .amux = TM6000_AMUX_ADC2,
448 }, {
449 .type = TM6000_INPUT_SVIDEO,
450 .vmux = TM6000_VMUX_VIDEO_AB,
451 .amux = TM6000_AMUX_ADC2,
452 },
453 },
454 .rinput = {
455 .type = TM6000_INPUT_RADIO,
456 .amux = TM6000_AMUX_ADC1,
457 },
458 },
459 [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
460 .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
461 .tuner_type = TUNER_XC2028, /* has a XC3028 */
462 .tuner_addr = 0xc2 >> 1,
463 .demod_addr = 0x1e >> 1,
464 .type = TM6010,
465 .caps = {
466 .has_tuner = 1,
467 .has_dvb = 1,
468 .has_zl10353 = 1,
469 .has_eeprom = 1,
470 .has_remote = 1,
471 },
472 .gpio = {
473 .tuner_reset = TM6010_GPIO_2,
474 .tuner_on = TM6010_GPIO_3,
475 .demod_reset = TM6010_GPIO_1,
476 .demod_on = TM6010_GPIO_4,
477 .power_led = TM6010_GPIO_7,
478 .dvb_led = TM6010_GPIO_5,
479 .ir = TM6010_GPIO_0,
480 },
481 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
482 .vinput = { {
483 .type = TM6000_INPUT_TV,
484 .vmux = TM6000_VMUX_VIDEO_B,
485 .amux = TM6000_AMUX_SIF1,
486 }, {
487 .type = TM6000_INPUT_COMPOSITE1,
488 .vmux = TM6000_VMUX_VIDEO_A,
489 .amux = TM6000_AMUX_ADC2,
490 }, {
491 .type = TM6000_INPUT_SVIDEO,
492 .vmux = TM6000_VMUX_VIDEO_AB,
493 .amux = TM6000_AMUX_ADC2,
494 },
495 },
496 },
497 [TM5600_BOARD_TERRATEC_GRABSTER] = {
498 .name = "Terratec Grabster AV 150/250 MX",
499 .type = TM5600,
500 .tuner_type = TUNER_ABSENT,
501 .vinput = { {
502 .type = TM6000_INPUT_TV,
503 .vmux = TM6000_VMUX_VIDEO_B,
504 .amux = TM6000_AMUX_ADC1,
505 }, {
506 .type = TM6000_INPUT_COMPOSITE1,
507 .vmux = TM6000_VMUX_VIDEO_A,
508 .amux = TM6000_AMUX_ADC2,
509 }, {
510 .type = TM6000_INPUT_SVIDEO,
511 .vmux = TM6000_VMUX_VIDEO_AB,
512 .amux = TM6000_AMUX_ADC2,
513 },
514 },
515 },
516 [TM6010_BOARD_TWINHAN_TU501] = {
517 .name = "Twinhan TU501(704D1)",
518 .tuner_type = TUNER_XC2028, /* has a XC3028 */
519 .tuner_addr = 0xc2 >> 1,
520 .demod_addr = 0x1e >> 1,
521 .type = TM6010,
522 .caps = {
523 .has_tuner = 1,
524 .has_dvb = 1,
525 .has_zl10353 = 1,
526 .has_eeprom = 1,
527 .has_remote = 1,
528 },
529 .gpio = {
530 .tuner_reset = TM6010_GPIO_2,
531 .tuner_on = TM6010_GPIO_3,
532 .demod_reset = TM6010_GPIO_1,
533 .demod_on = TM6010_GPIO_4,
534 .power_led = TM6010_GPIO_7,
535 .dvb_led = TM6010_GPIO_5,
536 .ir = TM6010_GPIO_0,
537 },
538 .vinput = { {
539 .type = TM6000_INPUT_TV,
540 .vmux = TM6000_VMUX_VIDEO_B,
541 .amux = TM6000_AMUX_SIF1,
542 }, {
543 .type = TM6000_INPUT_COMPOSITE1,
544 .vmux = TM6000_VMUX_VIDEO_A,
545 .amux = TM6000_AMUX_ADC2,
546 }, {
547 .type = TM6000_INPUT_SVIDEO,
548 .vmux = TM6000_VMUX_VIDEO_AB,
549 .amux = TM6000_AMUX_ADC2,
550 },
551 },
552 },
553 [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
554 .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
555 .tuner_type = TUNER_XC5000,
556 .tuner_addr = 0xc2 >> 1,
557 .demod_addr = 0x1e >> 1,
558 .type = TM6010,
559 .caps = {
560 .has_tuner = 1,
561 .has_dvb = 1,
562 .has_zl10353 = 1,
563 .has_eeprom = 1,
564 .has_remote = 0,
565 .has_radio = 1,
566 },
567 .gpio = {
568 .tuner_reset = TM6010_GPIO_0,
569 .demod_reset = TM6010_GPIO_1,
570 .power_led = TM6010_GPIO_6,
571 },
572 .vinput = { {
573 .type = TM6000_INPUT_TV,
574 .vmux = TM6000_VMUX_VIDEO_B,
575 .amux = TM6000_AMUX_SIF1,
576 },
577 },
578 .rinput = {
579 .type = TM6000_INPUT_RADIO,
580 .amux = TM6000_AMUX_ADC1,
581 },
582 },
583 [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
584 .name = "Beholder Voyager Lite TV/FM USB2.0",
585 .tuner_type = TUNER_XC5000,
586 .tuner_addr = 0xc2 >> 1,
587 .type = TM6010,
588 .caps = {
589 .has_tuner = 1,
590 .has_dvb = 0,
591 .has_zl10353 = 0,
592 .has_eeprom = 1,
593 .has_remote = 0,
594 .has_radio = 1,
595 },
596 .gpio = {
597 .tuner_reset = TM6010_GPIO_0,
598 .power_led = TM6010_GPIO_6,
599 },
600 .vinput = { {
601 .type = TM6000_INPUT_TV,
602 .vmux = TM6000_VMUX_VIDEO_B,
603 .amux = TM6000_AMUX_SIF1,
604 },
605 },
606 .rinput = {
607 .type = TM6000_INPUT_RADIO,
608 .amux = TM6000_AMUX_ADC1,
609 },
610 },
611 };
612
613 /* table of devices that work with this driver */
614 struct usb_device_id tm6000_id_table[] = {
615 { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
616 { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
617 { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
618 { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
619 { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
620 { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
621 { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
622 { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
623 { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
624 { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
625 { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
626 { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
627 { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
628 { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
629 { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
630 { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
631 { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
632 { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
633 { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
634 { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
635 { },
636 };
637
638 /* Control power led for show some activity */
639 void tm6000_flash_led(struct tm6000_core *dev, u8 state)
640 {
641 /* Power LED unconfigured */
642 if (!dev->gpio.power_led)
643 return;
644
645 /* ON Power LED */
646 if (state) {
647 switch (dev->model) {
648 case TM6010_BOARD_HAUPPAUGE_900H:
649 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
650 case TM6010_BOARD_TWINHAN_TU501:
651 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
652 dev->gpio.power_led, 0x00);
653 break;
654 case TM6010_BOARD_BEHOLD_WANDER:
655 case TM6010_BOARD_BEHOLD_VOYAGER:
656 case TM6010_BOARD_BEHOLD_WANDER_LITE:
657 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
658 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
659 dev->gpio.power_led, 0x01);
660 break;
661 }
662 }
663 /* OFF Power LED */
664 else {
665 switch (dev->model) {
666 case TM6010_BOARD_HAUPPAUGE_900H:
667 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
668 case TM6010_BOARD_TWINHAN_TU501:
669 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
670 dev->gpio.power_led, 0x01);
671 break;
672 case TM6010_BOARD_BEHOLD_WANDER:
673 case TM6010_BOARD_BEHOLD_VOYAGER:
674 case TM6010_BOARD_BEHOLD_WANDER_LITE:
675 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
676 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
677 dev->gpio.power_led, 0x00);
678 break;
679 }
680 }
681 }
682
683 /* Tuner callback to provide the proper gpio changes needed for xc5000 */
684 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
685 {
686 int rc = 0;
687 struct tm6000_core *dev = ptr;
688
689 if (dev->tuner_type != TUNER_XC5000)
690 return 0;
691
692 switch (command) {
693 case XC5000_TUNER_RESET:
694 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
695 dev->gpio.tuner_reset, 0x01);
696 msleep(15);
697 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
698 dev->gpio.tuner_reset, 0x00);
699 msleep(15);
700 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
701 dev->gpio.tuner_reset, 0x01);
702 break;
703 }
704 return rc;
705 }
706 EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
707
708 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
709
710 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
711 {
712 int rc = 0;
713 struct tm6000_core *dev = ptr;
714
715 if (dev->tuner_type != TUNER_XC2028)
716 return 0;
717
718 switch (command) {
719 case XC2028_RESET_CLK:
720 tm6000_ir_wait(dev, 0);
721
722 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
723 0x02, arg);
724 msleep(10);
725 rc = tm6000_i2c_reset(dev, 10);
726 break;
727 case XC2028_TUNER_RESET:
728 /* Reset codes during load firmware */
729 switch (arg) {
730 case 0:
731 /* newer tuner can faster reset */
732 switch (dev->model) {
733 case TM5600_BOARD_10MOONS_UT821:
734 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
735 dev->gpio.tuner_reset, 0x01);
736 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
737 0x300, 0x01);
738 msleep(10);
739 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
740 dev->gpio.tuner_reset, 0x00);
741 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
742 0x300, 0x00);
743 msleep(10);
744 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
745 dev->gpio.tuner_reset, 0x01);
746 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
747 0x300, 0x01);
748 break;
749 case TM6010_BOARD_HAUPPAUGE_900H:
750 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
751 case TM6010_BOARD_TWINHAN_TU501:
752 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
753 dev->gpio.tuner_reset, 0x01);
754 msleep(60);
755 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
756 dev->gpio.tuner_reset, 0x00);
757 msleep(75);
758 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
759 dev->gpio.tuner_reset, 0x01);
760 msleep(60);
761 break;
762 default:
763 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
764 dev->gpio.tuner_reset, 0x00);
765 msleep(130);
766 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
767 dev->gpio.tuner_reset, 0x01);
768 msleep(130);
769 break;
770 }
771
772 tm6000_ir_wait(dev, 1);
773 break;
774 case 1:
775 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
776 0x02, 0x01);
777 msleep(10);
778 break;
779 case 2:
780 rc = tm6000_i2c_reset(dev, 100);
781 break;
782 }
783 }
784 return rc;
785 }
786 EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
787
788 int tm6000_cards_setup(struct tm6000_core *dev)
789 {
790 int i, rc;
791
792 /*
793 * Board-specific initialization sequence. Handles all GPIO
794 * initialization sequences that are board-specific.
795 * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
796 * Probably, they're all based on some reference device. Due to that,
797 * there's a common routine at the end to handle those GPIO's. Devices
798 * that use different pinups or init sequences can just return at
799 * the board-specific session.
800 */
801 switch (dev->model) {
802 case TM6010_BOARD_HAUPPAUGE_900H:
803 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
804 case TM6010_BOARD_TWINHAN_TU501:
805 case TM6010_BOARD_GENERIC:
806 /* Turn xceive 3028 on */
807 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
808 msleep(15);
809 /* Turn zarlink zl10353 on */
810 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
811 msleep(15);
812 /* Reset zarlink zl10353 */
813 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
814 msleep(50);
815 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
816 msleep(15);
817 /* Turn zarlink zl10353 off */
818 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
819 msleep(15);
820 /* ir ? */
821 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
822 msleep(15);
823 /* Power led on (blue) */
824 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
825 msleep(15);
826 /* DVB led off (orange) */
827 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
828 msleep(15);
829 /* Turn zarlink zl10353 on */
830 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
831 msleep(15);
832 break;
833 case TM6010_BOARD_BEHOLD_WANDER:
834 case TM6010_BOARD_BEHOLD_WANDER_LITE:
835 /* Power led on (blue) */
836 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
837 msleep(15);
838 /* Reset zarlink zl10353 */
839 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
840 msleep(50);
841 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
842 msleep(15);
843 break;
844 case TM6010_BOARD_BEHOLD_VOYAGER:
845 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
846 /* Power led on (blue) */
847 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
848 msleep(15);
849 break;
850 default:
851 break;
852 }
853
854 /*
855 * Default initialization. Most of the devices seem to use GPIO1
856 * and GPIO4.on the same way, so, this handles the common sequence
857 * used by most devices.
858 * If a device uses a different sequence or different GPIO pins for
859 * reset, just add the code at the board-specific part
860 */
861
862 if (dev->gpio.tuner_reset) {
863 for (i = 0; i < 2; i++) {
864 rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
865 dev->gpio.tuner_reset, 0x00);
866 if (rc < 0) {
867 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
868 return rc;
869 }
870
871 msleep(10); /* Just to be conservative */
872 rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
873 dev->gpio.tuner_reset, 0x01);
874 if (rc < 0) {
875 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
876 return rc;
877 }
878 }
879 } else {
880 printk(KERN_ERR "Tuner reset is not configured\n");
881 return -1;
882 }
883
884 msleep(50);
885
886 return 0;
887 };
888
889 static void tm6000_config_tuner(struct tm6000_core *dev)
890 {
891 struct tuner_setup tun_setup;
892
893 /* Load tuner module */
894 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
895 "tuner", dev->tuner_addr, NULL);
896
897 memset(&tun_setup, 0, sizeof(tun_setup));
898 tun_setup.type = dev->tuner_type;
899 tun_setup.addr = dev->tuner_addr;
900
901 tun_setup.mode_mask = 0;
902 if (dev->caps.has_tuner)
903 tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
904
905 switch (dev->tuner_type) {
906 case TUNER_XC2028:
907 tun_setup.tuner_callback = tm6000_tuner_callback;
908 break;
909 case TUNER_XC5000:
910 tun_setup.tuner_callback = tm6000_xc5000_callback;
911 break;
912 }
913
914 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
915
916 switch (dev->tuner_type) {
917 case TUNER_XC2028: {
918 struct v4l2_priv_tun_config xc2028_cfg;
919 struct xc2028_ctrl ctl;
920
921 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
922 memset(&ctl, 0, sizeof(ctl));
923
924 ctl.demod = XC3028_FE_ZARLINK456;
925
926 xc2028_cfg.tuner = TUNER_XC2028;
927 xc2028_cfg.priv = &ctl;
928
929 switch (dev->model) {
930 case TM6010_BOARD_HAUPPAUGE_900H:
931 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
932 case TM6010_BOARD_TWINHAN_TU501:
933 ctl.fname = "xc3028L-v36.fw";
934 break;
935 default:
936 if (dev->dev_type == TM6010)
937 ctl.fname = "xc3028-v27.fw";
938 else
939 ctl.fname = "xc3028-v24.fw";
940 }
941
942 printk(KERN_INFO "Setting firmware parameters for xc2028\n");
943 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
944 &xc2028_cfg);
945
946 }
947 break;
948 case TUNER_XC5000:
949 {
950 struct v4l2_priv_tun_config xc5000_cfg;
951 struct xc5000_config ctl = {
952 .i2c_address = dev->tuner_addr,
953 .if_khz = 4570,
954 .radio_input = XC5000_RADIO_FM1_MONO,
955 };
956
957 xc5000_cfg.tuner = TUNER_XC5000;
958 xc5000_cfg.priv = &ctl;
959
960 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
961 &xc5000_cfg);
962 }
963 break;
964 default:
965 printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
966 break;
967 }
968 }
969
970 static int fill_board_specific_data(struct tm6000_core *dev)
971 {
972 int rc;
973
974 dev->dev_type = tm6000_boards[dev->model].type;
975 dev->tuner_type = tm6000_boards[dev->model].tuner_type;
976 dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
977
978 dev->gpio = tm6000_boards[dev->model].gpio;
979
980 dev->ir_codes = tm6000_boards[dev->model].ir_codes;
981
982 dev->demod_addr = tm6000_boards[dev->model].demod_addr;
983
984 dev->caps = tm6000_boards[dev->model].caps;
985
986 dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
987 dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
988 dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
989 dev->rinput = tm6000_boards[dev->model].rinput;
990
991 /* initialize hardware */
992 rc = tm6000_init(dev);
993 if (rc < 0)
994 return rc;
995
996 return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
997 }
998
999
1000 static void use_alternative_detection_method(struct tm6000_core *dev)
1001 {
1002 int i, model = -1;
1003
1004 if (!dev->eedata_size)
1005 return;
1006
1007 for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
1008 if (!tm6000_boards[i].eename_size)
1009 continue;
1010 if (dev->eedata_size < tm6000_boards[i].eename_pos +
1011 tm6000_boards[i].eename_size)
1012 continue;
1013
1014 if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
1015 tm6000_boards[i].eename,
1016 tm6000_boards[i].eename_size)) {
1017 model = i;
1018 break;
1019 }
1020 }
1021 if (model < 0) {
1022 printk(KERN_INFO "Device has eeprom but is currently unknown\n");
1023 return;
1024 }
1025
1026 dev->model = model;
1027
1028 printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
1029 tm6000_boards[model].name, model);
1030 }
1031
1032 static int tm6000_init_dev(struct tm6000_core *dev)
1033 {
1034 struct v4l2_frequency f;
1035 int rc = 0;
1036
1037 mutex_init(&dev->lock);
1038 mutex_lock(&dev->lock);
1039
1040 if (!is_generic(dev->model)) {
1041 rc = fill_board_specific_data(dev);
1042 if (rc < 0)
1043 goto err;
1044
1045 /* register i2c bus */
1046 rc = tm6000_i2c_register(dev);
1047 if (rc < 0)
1048 goto err;
1049 } else {
1050 /* register i2c bus */
1051 rc = tm6000_i2c_register(dev);
1052 if (rc < 0)
1053 goto err;
1054
1055 use_alternative_detection_method(dev);
1056
1057 rc = fill_board_specific_data(dev);
1058 if (rc < 0)
1059 goto err;
1060 }
1061
1062 /* Default values for STD and resolutions */
1063 dev->width = 720;
1064 dev->height = 480;
1065 dev->norm = V4L2_STD_PAL_M;
1066
1067 /* Configure tuner */
1068 tm6000_config_tuner(dev);
1069
1070 /* Set video standard */
1071 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
1072
1073 /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
1074 f.tuner = 0;
1075 f.type = V4L2_TUNER_ANALOG_TV;
1076 f.frequency = 3092; /* 193.25 MHz */
1077 dev->freq = f.frequency;
1078 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1079
1080 if (dev->caps.has_tda9874)
1081 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1082 "tvaudio", I2C_ADDR_TDA9874, NULL);
1083
1084 /* register and initialize V4L2 */
1085 rc = tm6000_v4l2_register(dev);
1086 if (rc < 0)
1087 goto err;
1088
1089 tm6000_add_into_devlist(dev);
1090 tm6000_init_extension(dev);
1091
1092 tm6000_ir_init(dev);
1093
1094 mutex_unlock(&dev->lock);
1095 return 0;
1096
1097 err:
1098 mutex_unlock(&dev->lock);
1099 return rc;
1100 }
1101
1102 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
1103 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
1104
1105 static void get_max_endpoint(struct usb_device *udev,
1106 struct usb_host_interface *alt,
1107 char *msgtype,
1108 struct usb_host_endpoint *curr_e,
1109 struct tm6000_endpoint *tm_ep)
1110 {
1111 u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
1112 unsigned int size = tmp & 0x7ff;
1113
1114 if (udev->speed == USB_SPEED_HIGH)
1115 size = size * hb_mult(tmp);
1116
1117 if (size > tm_ep->maxsize) {
1118 tm_ep->endp = curr_e;
1119 tm_ep->maxsize = size;
1120 tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
1121 tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
1122
1123 printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
1124 msgtype, curr_e->desc.bEndpointAddress,
1125 size);
1126 }
1127 }
1128
1129 /*
1130 * tm6000_usb_probe()
1131 * checks for supported devices
1132 */
1133 static int tm6000_usb_probe(struct usb_interface *interface,
1134 const struct usb_device_id *id)
1135 {
1136 struct usb_device *usbdev;
1137 struct tm6000_core *dev = NULL;
1138 int i, rc = 0;
1139 int nr = 0;
1140 char *speed;
1141
1142 usbdev = usb_get_dev(interface_to_usbdev(interface));
1143
1144 /* Selects the proper interface */
1145 rc = usb_set_interface(usbdev, 0, 1);
1146 if (rc < 0)
1147 goto err;
1148
1149 /* Check to see next free device and mark as used */
1150 nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
1151 if (nr >= TM6000_MAXBOARDS) {
1152 printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
1153 usb_put_dev(usbdev);
1154 return -ENOMEM;
1155 }
1156
1157 /* Create and initialize dev struct */
1158 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1159 if (dev == NULL) {
1160 printk(KERN_ERR "tm6000" ": out of memory!\n");
1161 usb_put_dev(usbdev);
1162 return -ENOMEM;
1163 }
1164 spin_lock_init(&dev->slock);
1165
1166 /* Increment usage count */
1167 tm6000_devused |= 1<<nr;
1168 snprintf(dev->name, 29, "tm6000 #%d", nr);
1169
1170 dev->model = id->driver_info;
1171 if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards)))
1172 dev->model = card[nr];
1173
1174 dev->udev = usbdev;
1175 dev->devno = nr;
1176
1177 switch (usbdev->speed) {
1178 case USB_SPEED_LOW:
1179 speed = "1.5";
1180 break;
1181 case USB_SPEED_UNKNOWN:
1182 case USB_SPEED_FULL:
1183 speed = "12";
1184 break;
1185 case USB_SPEED_HIGH:
1186 speed = "480";
1187 break;
1188 default:
1189 speed = "unknown";
1190 }
1191
1192
1193
1194 /* Get endpoints */
1195 for (i = 0; i < interface->num_altsetting; i++) {
1196 int ep;
1197
1198 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
1199 struct usb_host_endpoint *e;
1200 int dir_out;
1201
1202 e = &interface->altsetting[i].endpoint[ep];
1203
1204 dir_out = ((e->desc.bEndpointAddress &
1205 USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
1206
1207 printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
1208 i,
1209 interface->altsetting[i].desc.bInterfaceNumber,
1210 interface->altsetting[i].desc.bInterfaceClass);
1211
1212 switch (e->desc.bmAttributes) {
1213 case USB_ENDPOINT_XFER_BULK:
1214 if (!dir_out) {
1215 get_max_endpoint(usbdev,
1216 &interface->altsetting[i],
1217 "Bulk IN", e,
1218 &dev->bulk_in);
1219 } else {
1220 get_max_endpoint(usbdev,
1221 &interface->altsetting[i],
1222 "Bulk OUT", e,
1223 &dev->bulk_out);
1224 }
1225 break;
1226 case USB_ENDPOINT_XFER_ISOC:
1227 if (!dir_out) {
1228 get_max_endpoint(usbdev,
1229 &interface->altsetting[i],
1230 "ISOC IN", e,
1231 &dev->isoc_in);
1232 } else {
1233 get_max_endpoint(usbdev,
1234 &interface->altsetting[i],
1235 "ISOC OUT", e,
1236 &dev->isoc_out);
1237 }
1238 break;
1239 case USB_ENDPOINT_XFER_INT:
1240 if (!dir_out) {
1241 get_max_endpoint(usbdev,
1242 &interface->altsetting[i],
1243 "INT IN", e,
1244 &dev->int_in);
1245 } else {
1246 get_max_endpoint(usbdev,
1247 &interface->altsetting[i],
1248 "INT OUT", e,
1249 &dev->int_out);
1250 }
1251 break;
1252 }
1253 }
1254 }
1255
1256
1257 printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
1258 speed,
1259 le16_to_cpu(dev->udev->descriptor.idVendor),
1260 le16_to_cpu(dev->udev->descriptor.idProduct),
1261 interface->altsetting->desc.bInterfaceNumber);
1262
1263 /* check if the the device has the iso in endpoint at the correct place */
1264 if (!dev->isoc_in.endp) {
1265 printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
1266 rc = -ENODEV;
1267
1268 goto err;
1269 }
1270
1271 /* save our data pointer in this interface device */
1272 usb_set_intfdata(interface, dev);
1273
1274 printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
1275
1276 rc = tm6000_init_dev(dev);
1277
1278 if (rc < 0)
1279 goto err;
1280
1281 return 0;
1282
1283 err:
1284 printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
1285
1286 tm6000_devused &= ~(1<<nr);
1287 usb_put_dev(usbdev);
1288
1289 kfree(dev);
1290 return rc;
1291 }
1292
1293 /*
1294 * tm6000_usb_disconnect()
1295 * called when the device gets diconencted
1296 * video device will be unregistered on v4l2_close in case it is still open
1297 */
1298 static void tm6000_usb_disconnect(struct usb_interface *interface)
1299 {
1300 struct tm6000_core *dev = usb_get_intfdata(interface);
1301 usb_set_intfdata(interface, NULL);
1302
1303 if (!dev)
1304 return;
1305
1306 printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
1307
1308 tm6000_ir_fini(dev);
1309
1310 if (dev->gpio.power_led) {
1311 switch (dev->model) {
1312 case TM6010_BOARD_HAUPPAUGE_900H:
1313 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
1314 case TM6010_BOARD_TWINHAN_TU501:
1315 /* Power led off */
1316 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1317 dev->gpio.power_led, 0x01);
1318 msleep(15);
1319 break;
1320 case TM6010_BOARD_BEHOLD_WANDER:
1321 case TM6010_BOARD_BEHOLD_VOYAGER:
1322 case TM6010_BOARD_BEHOLD_WANDER_LITE:
1323 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
1324 /* Power led off */
1325 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1326 dev->gpio.power_led, 0x00);
1327 msleep(15);
1328 break;
1329 }
1330 }
1331 tm6000_v4l2_unregister(dev);
1332
1333 tm6000_i2c_unregister(dev);
1334
1335 v4l2_device_unregister(&dev->v4l2_dev);
1336
1337 dev->state |= DEV_DISCONNECTED;
1338
1339 usb_put_dev(dev->udev);
1340
1341 tm6000_close_extension(dev);
1342 tm6000_remove_from_devlist(dev);
1343
1344 kfree(dev);
1345 }
1346
1347 static struct usb_driver tm6000_usb_driver = {
1348 .name = "tm6000",
1349 .probe = tm6000_usb_probe,
1350 .disconnect = tm6000_usb_disconnect,
1351 .id_table = tm6000_id_table,
1352 };
1353
1354 static int __init tm6000_module_init(void)
1355 {
1356 int result;
1357
1358 printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
1359 (TM6000_VERSION >> 16) & 0xff,
1360 (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff);
1361
1362 /* register this driver with the USB subsystem */
1363 result = usb_register(&tm6000_usb_driver);
1364 if (result)
1365 printk(KERN_ERR "tm6000"
1366 " usb_register failed. Error number %d.\n", result);
1367
1368 return result;
1369 }
1370
1371 static void __exit tm6000_module_exit(void)
1372 {
1373 /* deregister at USB subsystem */
1374 usb_deregister(&tm6000_usb_driver);
1375 }
1376
1377 module_init(tm6000_module_init);
1378 module_exit(tm6000_module_exit);
1379
1380 MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
1381 MODULE_AUTHOR("Mauro Carvalho Chehab");
1382 MODULE_LICENSE("GPL");
linux-next