drivers/tty/serial/icom.h

   1 /*
   2  * icom.h
   3  *
   4  * Copyright (C) 2001 Michael Anderson, IBM Corporation
   5  *
   6  * Serial device driver include file.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  21  */
  22
  23 #include <linux/serial_core.h>
  24
  25 #define BAUD_TABLE_LIMIT        ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
  26 static int icom_acfg_baud[] = {
  27         300,
  28         600,
  29         900,
  30         1200,
  31         1800,
  32         2400,
  33         3600,
  34         4800,
  35         7200,
  36         9600,
  37         14400,
  38         19200,
  39         28800,
  40         38400,
  41         57600,
  42         76800,
  43         115200,
  44         153600,
  45         230400,
  46         307200,
  47         460800,
  48 };
  49
  50 struct icom_regs {
  51         u32 control;            /* Adapter Control Register     */
  52         u32 interrupt;          /* Adapter Interrupt Register   */
  53         u32 int_mask;           /* Adapter Interrupt Mask Reg   */
  54         u32 int_pri;            /* Adapter Interrupt Priority r */
  55         u32 int_reg_b;          /* Adapter non-masked Interrupt */
  56         u32 resvd01;
  57         u32 resvd02;
  58         u32 resvd03;
  59         u32 control_2;          /* Adapter Control Register 2   */
  60         u32 interrupt_2;        /* Adapter Interrupt Register 2 */
  61         u32 int_mask_2;         /* Adapter Interrupt Mask 2     */
  62         u32 int_pri_2;          /* Adapter Interrupt Prior 2    */
  63         u32 int_reg_2b;         /* Adapter non-masked 2         */
  64 };
  65
  66 struct func_dram {
  67         u32 reserved[108];      /* 0-1B0   reserved by personality code */
  68         u32 RcvStatusAddr;      /* 1B0-1B3 Status Address for Next rcv */
  69         u8 RcvStnAddr;          /* 1B4     Receive Station Addr */
  70         u8 IdleState;           /* 1B5     Idle State */
  71         u8 IdleMonitor;         /* 1B6     Idle Monitor */
  72         u8 FlagFillIdleTimer;   /* 1B7     Flag Fill Idle Timer */
  73         u32 XmitStatusAddr;     /* 1B8-1BB Transmit Status Address */
  74         u8 StartXmitCmd;        /* 1BC     Start Xmit Command */
  75         u8 HDLCConfigReg;       /* 1BD     Reserved */
  76         u8 CauseCode;           /* 1BE     Cause code for fatal error */
  77         u8 xchar;               /* 1BF     High priority send */
  78         u32 reserved3;          /* 1C0-1C3 Reserved */
  79         u8 PrevCmdReg;          /* 1C4     Reserved */
  80         u8 CmdReg;              /* 1C5     Command Register */
  81         u8 async_config2;       /* 1C6     Async Config Byte 2 */
  82         u8 async_config3;       /* 1C7     Async Config Byte 3 */
  83         u8 dce_resvd[20];       /* 1C8-1DB DCE Rsvd           */
  84         u8 dce_resvd21;         /* 1DC     DCE Rsvd (21st byte */
  85         u8 misc_flags;          /* 1DD     misc flags         */
  86 #define V2_HARDWARE     0x40
  87 #define ICOM_HDW_ACTIVE 0x01
  88         u8 call_length;         /* 1DE     Phone #/CFI buff ln */
  89         u8 call_length2;        /* 1DF     Upper byte (unused) */
  90         u32 call_addr;          /* 1E0-1E3 Phn #/CFI buff addr */
  91         u16 timer_value;        /* 1E4-1E5 general timer value */
  92         u8 timer_command;       /* 1E6     general timer cmd  */
  93         u8 dce_command;         /* 1E7     dce command reg    */
  94         u8 dce_cmd_status;      /* 1E8     dce command stat   */
  95         u8 x21_r1_ioff;         /* 1E9     dce ready counter  */
  96         u8 x21_r0_ioff;         /* 1EA     dce not ready ctr  */
  97         u8 x21_ralt_ioff;       /* 1EB     dce CNR counter    */
  98         u8 x21_r1_ion;          /* 1EC     dce ready I on ctr */
  99         u8 rsvd_ier;            /* 1ED     Rsvd for IER (if ne */
 100         u8 ier;                 /* 1EE     Interrupt Enable   */
 101         u8 isr;                 /* 1EF     Input Signal Reg   */
 102         u8 osr;                 /* 1F0     Output Signal Reg  */
 103         u8 reset;               /* 1F1     Reset/Reload Reg   */
 104         u8 disable;             /* 1F2     Disable Reg        */
 105         u8 sync;                /* 1F3     Sync Reg           */
 106         u8 error_stat;          /* 1F4     Error Status       */
 107         u8 cable_id;            /* 1F5     Cable ID           */
 108         u8 cs_length;           /* 1F6     CS Load Length     */
 109         u8 mac_length;          /* 1F7     Mac Load Length    */
 110         u32 cs_load_addr;       /* 1F8-1FB Call Load PCI Addr */
 111         u32 mac_load_addr;      /* 1FC-1FF Mac Load PCI Addr  */
 112 };
 113
 114 /*
 115  * adapter defines and structures
 116  */
 117 #define ICOM_CONTROL_START_A         0x00000008
 118 #define ICOM_CONTROL_STOP_A          0x00000004
 119 #define ICOM_CONTROL_START_B         0x00000002
 120 #define ICOM_CONTROL_STOP_B          0x00000001
 121 #define ICOM_CONTROL_START_C         0x00000008
 122 #define ICOM_CONTROL_STOP_C          0x00000004
 123 #define ICOM_CONTROL_START_D         0x00000002
 124 #define ICOM_CONTROL_STOP_D          0x00000001
 125 #define ICOM_IRAM_OFFSET             0x1000
 126 #define ICOM_IRAM_SIZE               0x0C00
 127 #define ICOM_DCE_IRAM_OFFSET         0x0A00
 128 #define ICOM_CABLE_ID_VALID          0x01
 129 #define ICOM_CABLE_ID_MASK           0xF0
 130 #define ICOM_DISABLE                 0x80
 131 #define CMD_XMIT_RCV_ENABLE          0xC0
 132 #define CMD_XMIT_ENABLE              0x40
 133 #define CMD_RCV_DISABLE              0x00
 134 #define CMD_RCV_ENABLE               0x80
 135 #define CMD_RESTART                  0x01
 136 #define CMD_HOLD_XMIT                0x02
 137 #define CMD_SND_BREAK                0x04
 138 #define RS232_CABLE                  0x06
 139 #define V24_CABLE                    0x0E
 140 #define V35_CABLE                    0x0C
 141 #define V36_CABLE                    0x02
 142 #define NO_CABLE                     0x00
 143 #define START_DOWNLOAD               0x80
 144 #define ICOM_INT_MASK_PRC_A          0x00003FFF
 145 #define ICOM_INT_MASK_PRC_B          0x3FFF0000
 146 #define ICOM_INT_MASK_PRC_C          0x00003FFF
 147 #define ICOM_INT_MASK_PRC_D          0x3FFF0000
 148 #define INT_RCV_COMPLETED            0x1000
 149 #define INT_XMIT_COMPLETED           0x2000
 150 #define INT_IDLE_DETECT              0x0800
 151 #define INT_RCV_DISABLED             0x0400
 152 #define INT_XMIT_DISABLED            0x0200
 153 #define INT_RCV_XMIT_SHUTDOWN        0x0100
 154 #define INT_FATAL_ERROR              0x0080
 155 #define INT_CABLE_PULL               0x0020
 156 #define INT_SIGNAL_CHANGE            0x0010
 157 #define HDLC_PPP_PURE_ASYNC          0x02
 158 #define HDLC_FF_FILL                 0x00
 159 #define HDLC_HDW_FLOW                0x01
 160 #define START_XMIT                   0x80
 161 #define ICOM_ACFG_DRIVE1             0x20
 162 #define ICOM_ACFG_NO_PARITY          0x00
 163 #define ICOM_ACFG_PARITY_ENAB        0x02
 164 #define ICOM_ACFG_PARITY_ODD         0x01
 165 #define ICOM_ACFG_8BPC               0x00
 166 #define ICOM_ACFG_7BPC               0x04
 167 #define ICOM_ACFG_6BPC               0x08
 168 #define ICOM_ACFG_5BPC               0x0C
 169 #define ICOM_ACFG_1STOP_BIT          0x00
 170 #define ICOM_ACFG_2STOP_BIT          0x10
 171 #define ICOM_DTR                     0x80
 172 #define ICOM_RTS                     0x40
 173 #define ICOM_RI                      0x08
 174 #define ICOM_DSR                     0x80
 175 #define ICOM_DCD                     0x20
 176 #define ICOM_CTS                     0x40
 177
 178 #define NUM_XBUFFS 1
 179 #define NUM_RBUFFS 2
 180 #define RCV_BUFF_SZ 0x0200
 181 #define XMIT_BUFF_SZ 0x1000
 182 struct statusArea {
 183     /**********************************************/
 184         /* Transmit Status Area                       */
 185     /**********************************************/
 186         struct xmit_status_area{
 187                 u32 leNext;     /* Next entry in Little Endian on Adapter */
 188                 u32 leNextASD;
 189                 u32 leBuffer;   /* Buffer for entry in LE for Adapter */
 190                 u16 leLengthASD;
 191                 u16 leOffsetASD;
 192                 u16 leLength;   /* Length of data in segment */
 193                 u16 flags;
 194 #define SA_FLAGS_DONE           0x0080  /* Done with Segment */
 195 #define SA_FLAGS_CONTINUED      0x8000  /* More Segments */
 196 #define SA_FLAGS_IDLE           0x4000  /* Mark IDLE after frm */
 197 #define SA_FLAGS_READY_TO_XMIT  0x0800
 198 #define SA_FLAGS_STAT_MASK      0x007F
 199         } xmit[NUM_XBUFFS];
 200
 201     /**********************************************/
 202         /* Receive Status Area                        */
 203     /**********************************************/
 204         struct {
 205                 u32 leNext;     /* Next entry in Little Endian on Adapter */
 206                 u32 leNextASD;
 207                 u32 leBuffer;   /* Buffer for entry in LE for Adapter */
 208                 u16 WorkingLength;      /* size of segment */
 209                 u16 reserv01;
 210                 u16 leLength;   /* Length of data in segment */
 211                 u16 flags;
 212 #define SA_FL_RCV_DONE           0x0010 /* Data ready */
 213 #define SA_FLAGS_OVERRUN         0x0040
 214 #define SA_FLAGS_PARITY_ERROR    0x0080
 215 #define SA_FLAGS_FRAME_ERROR     0x0001
 216 #define SA_FLAGS_FRAME_TRUNC     0x0002
 217 #define SA_FLAGS_BREAK_DET       0x0004 /* set conditionally by device driver, not hardware */
 218 #define SA_FLAGS_RCV_MASK        0xFFE6
 219         } rcv[NUM_RBUFFS];
 220 };
 221
 222 struct icom_adapter;
 223
 224
 225 #define ICOM_MAJOR       243
 226 #define ICOM_MINOR_START 0
 227
 228 struct icom_port {
 229         struct uart_port uart_port;
 230         u8 imbed_modem;
 231 #define ICOM_UNKNOWN            1
 232 #define ICOM_RVX                2
 233 #define ICOM_IMBED_MODEM        3
 234         unsigned char cable_id;
 235         unsigned char read_status_mask;
 236         unsigned char ignore_status_mask;
 237         void __iomem * int_reg;
 238         struct icom_regs __iomem *global_reg;
 239         struct func_dram __iomem *dram;
 240         int port;
 241         struct statusArea *statStg;
 242         dma_addr_t statStg_pci;
 243         u32 *xmitRestart;
 244         dma_addr_t xmitRestart_pci;
 245         unsigned char *xmit_buf;
 246         dma_addr_t xmit_buf_pci;
 247         unsigned char *recv_buf;
 248         dma_addr_t recv_buf_pci;
 249         int next_rcv;
 250         int put_length;
 251         int status;
 252 #define ICOM_PORT_ACTIVE        1       /* Port exists. */
 253 #define ICOM_PORT_OFF           0       /* Port does not exist. */
 254         int load_in_progress;
 255         struct icom_adapter *adapter;
 256 };
 257
 258 struct icom_adapter {
 259         void __iomem * base_addr;
 260         unsigned long base_addr_pci;
 261         struct pci_dev *pci_dev;
 262         struct icom_port port_info[4];
 263         int index;
 264         int version;
 265 #define ADAPTER_V1      0x0001
 266 #define ADAPTER_V2      0x0002
 267         u32 subsystem_id;
 268 #define FOUR_PORT_MODEL                         0x0252
 269 #define V2_TWO_PORTS_RVX                        0x021A
 270 #define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM      0x0251
 271         int numb_ports;
 272         struct list_head icom_adapter_entry;
 273         struct kref kref;
 274 };
 275
 276 /* prototype */
 277 extern void iCom_sercons_init(void);
 278
 279 struct lookup_proc_table {
 280         u32     __iomem *global_control_reg;
 281         unsigned long   processor_id;
 282 };
 283
 284 struct lookup_int_table {
 285         u32     __iomem *global_int_mask;
 286         unsigned long   processor_id;
 287 };