?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge remote-tracking branch 'moduleh/module.h-split'
[linux-2.6/next.git] / drivers / tty / serial / mpc52xx_uart.c
bloba0bcd8a3758dd63f2103768d7fd7dc8ab65ca8ad
1 /*
2 * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
3 *
4 * FIXME According to the usermanual the status bits in the status register
5 * are only updated when the peripherals access the FIFO and not when the
6 * CPU access them. So since we use this bits to know when we stop writing
7 * and reading, they may not be updated in-time and a race condition may
8 * exists. But I haven't be able to prove this and I don't care. But if
9 * any problem arises, it might worth checking. The TX/RX FIFO Stats
10 * registers should be used in addition.
11 * Update: Actually, they seem updated ... At least the bits we use.
12 *
13 *
14 * Maintainer : Sylvain Munaut <tnt@246tNt.com>
15 *
16 * Some of the code has been inspired/copied from the 2.4 code written
17 * by Dale Farnsworth <dfarnsworth@mvista.com>.
18 *
19 * Copyright (C) 2008 Freescale Semiconductor Inc.
20 * John Rigby <jrigby@gmail.com>
21 * Added support for MPC5121
22 * Copyright (C) 2006 Secret Lab Technologies Ltd.
23 * Grant Likely <grant.likely@secretlab.ca>
24 * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
25 * Copyright (C) 2003 MontaVista, Software, Inc.
26 *
27 * This file is licensed under the terms of the GNU General Public License
28 * version 2. This program is licensed "as is" without any warranty of any
29 * kind, whether express or implied.
30 */
31
32 #undef DEBUG
33
34 #include <linux/device.h>
35 #include <linux/module.h>
36 #include <linux/tty.h>
37 #include <linux/serial.h>
38 #include <linux/sysrq.h>
39 #include <linux/console.h>
40 #include <linux/delay.h>
41 #include <linux/io.h>
42 #include <linux/of.h>
43 #include <linux/of_platform.h>
44 #include <linux/clk.h>
45
46 #include <asm/mpc52xx.h>
47 #include <asm/mpc52xx_psc.h>
48
49 #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
50 #define SUPPORT_SYSRQ
51 #endif
52
53 #include <linux/serial_core.h>
54
55
56 /* We've been assigned a range on the "Low-density serial ports" major */
57 #define SERIAL_PSC_MAJOR 204
58 #define SERIAL_PSC_MINOR 148
59
60
61 #define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
62
63
64 static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
65 /* Rem: - We use the read_status_mask as a shadow of
66 * psc->mpc52xx_psc_imr
67 * - It's important that is array is all zero on start as we
68 * use it to know if it's initialized or not ! If it's not sure
69 * it's cleared, then a memset(...,0,...) should be added to
70 * the console_init
71 */
72
73 /* lookup table for matching device nodes to index numbers */
74 static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
75
76 static void mpc52xx_uart_of_enumerate(void);
77
78
79 #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
80
81
82 /* Forward declaration of the interruption handling routine */
83 static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
84 static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
85
86
87 /* Simple macro to test if a port is console or not. This one is taken
88 * for serial_core.c and maybe should be moved to serial_core.h ? */
89 #ifdef CONFIG_SERIAL_CORE_CONSOLE
90 #define uart_console(port) \
91 ((port)->cons && (port)->cons->index == (port)->line)
92 #else
93 #define uart_console(port) (0)
94 #endif
95
96 /* ======================================================================== */
97 /* PSC fifo operations for isolating differences between 52xx and 512x */
98 /* ======================================================================== */
99
100 struct psc_ops {
101 void (*fifo_init)(struct uart_port *port);
102 int (*raw_rx_rdy)(struct uart_port *port);
103 int (*raw_tx_rdy)(struct uart_port *port);
104 int (*rx_rdy)(struct uart_port *port);
105 int (*tx_rdy)(struct uart_port *port);
106 int (*tx_empty)(struct uart_port *port);
107 void (*stop_rx)(struct uart_port *port);
108 void (*start_tx)(struct uart_port *port);
109 void (*stop_tx)(struct uart_port *port);
110 void (*rx_clr_irq)(struct uart_port *port);
111 void (*tx_clr_irq)(struct uart_port *port);
112 void (*write_char)(struct uart_port *port, unsigned char c);
113 unsigned char (*read_char)(struct uart_port *port);
114 void (*cw_disable_ints)(struct uart_port *port);
115 void (*cw_restore_ints)(struct uart_port *port);
116 unsigned int (*set_baudrate)(struct uart_port *port,
117 struct ktermios *new,
118 struct ktermios *old);
119 int (*clock)(struct uart_port *port, int enable);
120 int (*fifoc_init)(void);
121 void (*fifoc_uninit)(void);
122 void (*get_irq)(struct uart_port *, struct device_node *);
123 irqreturn_t (*handle_irq)(struct uart_port *port);
124 };
125
126 /* setting the prescaler and divisor reg is common for all chips */
127 static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
128 u16 prescaler, unsigned int divisor)
129 {
130 /* select prescaler */
131 out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
132 out_8(&psc->ctur, divisor >> 8);
133 out_8(&psc->ctlr, divisor & 0xff);
134 }
135
136 #ifdef CONFIG_PPC_MPC52xx
137 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
138 static void mpc52xx_psc_fifo_init(struct uart_port *port)
139 {
140 struct mpc52xx_psc __iomem *psc = PSC(port);
141 struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
142
143 out_8(&fifo->rfcntl, 0x00);
144 out_be16(&fifo->rfalarm, 0x1ff);
145 out_8(&fifo->tfcntl, 0x07);
146 out_be16(&fifo->tfalarm, 0x80);
147
148 port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
149 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
150 }
151
152 static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
153 {
154 return in_be16(&PSC(port)->mpc52xx_psc_status)
155 & MPC52xx_PSC_SR_RXRDY;
156 }
157
158 static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
159 {
160 return in_be16(&PSC(port)->mpc52xx_psc_status)
161 & MPC52xx_PSC_SR_TXRDY;
162 }
163
164
165 static int mpc52xx_psc_rx_rdy(struct uart_port *port)
166 {
167 return in_be16(&PSC(port)->mpc52xx_psc_isr)
168 & port->read_status_mask
169 & MPC52xx_PSC_IMR_RXRDY;
170 }
171
172 static int mpc52xx_psc_tx_rdy(struct uart_port *port)
173 {
174 return in_be16(&PSC(port)->mpc52xx_psc_isr)
175 & port->read_status_mask
176 & MPC52xx_PSC_IMR_TXRDY;
177 }
178
179 static int mpc52xx_psc_tx_empty(struct uart_port *port)
180 {
181 return in_be16(&PSC(port)->mpc52xx_psc_status)
182 & MPC52xx_PSC_SR_TXEMP;
183 }
184
185 static void mpc52xx_psc_start_tx(struct uart_port *port)
186 {
187 port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
188 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
189 }
190
191 static void mpc52xx_psc_stop_tx(struct uart_port *port)
192 {
193 port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
194 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
195 }
196
197 static void mpc52xx_psc_stop_rx(struct uart_port *port)
198 {
199 port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
200 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
201 }
202
203 static void mpc52xx_psc_rx_clr_irq(struct uart_port *port)
204 {
205 }
206
207 static void mpc52xx_psc_tx_clr_irq(struct uart_port *port)
208 {
209 }
210
211 static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c)
212 {
213 out_8(&PSC(port)->mpc52xx_psc_buffer_8, c);
214 }
215
216 static unsigned char mpc52xx_psc_read_char(struct uart_port *port)
217 {
218 return in_8(&PSC(port)->mpc52xx_psc_buffer_8);
219 }
220
221 static void mpc52xx_psc_cw_disable_ints(struct uart_port *port)
222 {
223 out_be16(&PSC(port)->mpc52xx_psc_imr, 0);
224 }
225
226 static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
227 {
228 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
229 }
230
231 static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
232 struct ktermios *new,
233 struct ktermios *old)
234 {
235 unsigned int baud;
236 unsigned int divisor;
237
238 /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
239 baud = uart_get_baud_rate(port, new, old,
240 port->uartclk / (32 * 0xffff) + 1,
241 port->uartclk / 32);
242 divisor = (port->uartclk + 16 * baud) / (32 * baud);
243
244 /* enable the /32 prescaler and set the divisor */
245 mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
246 return baud;
247 }
248
249 static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
250 struct ktermios *new,
251 struct ktermios *old)
252 {
253 unsigned int baud;
254 unsigned int divisor;
255 u16 prescaler;
256
257 /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
258 * ipb freq */
259 baud = uart_get_baud_rate(port, new, old,
260 port->uartclk / (32 * 0xffff) + 1,
261 port->uartclk / 4);
262 divisor = (port->uartclk + 2 * baud) / (4 * baud);
263
264 /* select the proper prescaler and set the divisor */
265 if (divisor > 0xffff) {
266 divisor = (divisor + 4) / 8;
267 prescaler = 0xdd00; /* /32 */
268 } else
269 prescaler = 0xff00; /* /4 */
270 mpc52xx_set_divisor(PSC(port), prescaler, divisor);
271 return baud;
272 }
273
274 static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
275 {
276 port->irqflags = IRQF_DISABLED;
277 port->irq = irq_of_parse_and_map(np, 0);
278 }
279
280 /* 52xx specific interrupt handler. The caller holds the port lock */
281 static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port)
282 {
283 return mpc5xxx_uart_process_int(port);
284 }
285
286 static struct psc_ops mpc52xx_psc_ops = {
287 .fifo_init = mpc52xx_psc_fifo_init,
288 .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
289 .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
290 .rx_rdy = mpc52xx_psc_rx_rdy,
291 .tx_rdy = mpc52xx_psc_tx_rdy,
292 .tx_empty = mpc52xx_psc_tx_empty,
293 .stop_rx = mpc52xx_psc_stop_rx,
294 .start_tx = mpc52xx_psc_start_tx,
295 .stop_tx = mpc52xx_psc_stop_tx,
296 .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
297 .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
298 .write_char = mpc52xx_psc_write_char,
299 .read_char = mpc52xx_psc_read_char,
300 .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
301 .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
302 .set_baudrate = mpc5200_psc_set_baudrate,
303 .get_irq = mpc52xx_psc_get_irq,
304 .handle_irq = mpc52xx_psc_handle_irq,
305 };
306
307 static struct psc_ops mpc5200b_psc_ops = {
308 .fifo_init = mpc52xx_psc_fifo_init,
309 .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
310 .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
311 .rx_rdy = mpc52xx_psc_rx_rdy,
312 .tx_rdy = mpc52xx_psc_tx_rdy,
313 .tx_empty = mpc52xx_psc_tx_empty,
314 .stop_rx = mpc52xx_psc_stop_rx,
315 .start_tx = mpc52xx_psc_start_tx,
316 .stop_tx = mpc52xx_psc_stop_tx,
317 .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
318 .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
319 .write_char = mpc52xx_psc_write_char,
320 .read_char = mpc52xx_psc_read_char,
321 .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
322 .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
323 .set_baudrate = mpc5200b_psc_set_baudrate,
324 .get_irq = mpc52xx_psc_get_irq,
325 .handle_irq = mpc52xx_psc_handle_irq,
326 };
327
328 #endif /* CONFIG_MPC52xx */
329
330 #ifdef CONFIG_PPC_MPC512x
331 #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
332
333 /* PSC FIFO Controller for mpc512x */
334 struct psc_fifoc {
335 u32 fifoc_cmd;
336 u32 fifoc_int;
337 u32 fifoc_dma;
338 u32 fifoc_axe;
339 u32 fifoc_debug;
340 };
341
342 static struct psc_fifoc __iomem *psc_fifoc;
343 static unsigned int psc_fifoc_irq;
344
345 static void mpc512x_psc_fifo_init(struct uart_port *port)
346 {
347 /* /32 prescaler */
348 out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00);
349
350 out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
351 out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
352 out_be32(&FIFO_512x(port)->txalarm, 1);
353 out_be32(&FIFO_512x(port)->tximr, 0);
354
355 out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
356 out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
357 out_be32(&FIFO_512x(port)->rxalarm, 1);
358 out_be32(&FIFO_512x(port)->rximr, 0);
359
360 out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM);
361 out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM);
362 }
363
364 static int mpc512x_psc_raw_rx_rdy(struct uart_port *port)
365 {
366 return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
367 }
368
369 static int mpc512x_psc_raw_tx_rdy(struct uart_port *port)
370 {
371 return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL);
372 }
373
374 static int mpc512x_psc_rx_rdy(struct uart_port *port)
375 {
376 return in_be32(&FIFO_512x(port)->rxsr)
377 & in_be32(&FIFO_512x(port)->rximr)
378 & MPC512x_PSC_FIFO_ALARM;
379 }
380
381 static int mpc512x_psc_tx_rdy(struct uart_port *port)
382 {
383 return in_be32(&FIFO_512x(port)->txsr)
384 & in_be32(&FIFO_512x(port)->tximr)
385 & MPC512x_PSC_FIFO_ALARM;
386 }
387
388 static int mpc512x_psc_tx_empty(struct uart_port *port)
389 {
390 return in_be32(&FIFO_512x(port)->txsr)
391 & MPC512x_PSC_FIFO_EMPTY;
392 }
393
394 static void mpc512x_psc_stop_rx(struct uart_port *port)
395 {
396 unsigned long rx_fifo_imr;
397
398 rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr);
399 rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
400 out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr);
401 }
402
403 static void mpc512x_psc_start_tx(struct uart_port *port)
404 {
405 unsigned long tx_fifo_imr;
406
407 tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
408 tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
409 out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
410 }
411
412 static void mpc512x_psc_stop_tx(struct uart_port *port)
413 {
414 unsigned long tx_fifo_imr;
415
416 tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
417 tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
418 out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
419 }
420
421 static void mpc512x_psc_rx_clr_irq(struct uart_port *port)
422 {
423 out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr));
424 }
425
426 static void mpc512x_psc_tx_clr_irq(struct uart_port *port)
427 {
428 out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr));
429 }
430
431 static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c)
432 {
433 out_8(&FIFO_512x(port)->txdata_8, c);
434 }
435
436 static unsigned char mpc512x_psc_read_char(struct uart_port *port)
437 {
438 return in_8(&FIFO_512x(port)->rxdata_8);
439 }
440
441 static void mpc512x_psc_cw_disable_ints(struct uart_port *port)
442 {
443 port->read_status_mask =
444 in_be32(&FIFO_512x(port)->tximr) << 16 |
445 in_be32(&FIFO_512x(port)->rximr);
446 out_be32(&FIFO_512x(port)->tximr, 0);
447 out_be32(&FIFO_512x(port)->rximr, 0);
448 }
449
450 static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
451 {
452 out_be32(&FIFO_512x(port)->tximr,
453 (port->read_status_mask >> 16) & 0x7f);
454 out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
455 }
456
457 static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
458 struct ktermios *new,
459 struct ktermios *old)
460 {
461 unsigned int baud;
462 unsigned int divisor;
463
464 /*
465 * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
466 * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
467 * Furthermore, it states that "After reset, the prescaler by 10
468 * for the UART mode is selected", but the reset register value is
469 * 0x0000 which means a /32 prescaler. This is wrong.
470 *
471 * In reality using /32 prescaler doesn't work, as it is not supported!
472 * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
473 * Chapter 4.1 PSC in UART Mode.
474 * Calculate with a /16 prescaler here.
475 */
476
477 /* uartclk contains the ips freq */
478 baud = uart_get_baud_rate(port, new, old,
479 port->uartclk / (16 * 0xffff) + 1,
480 port->uartclk / 16);
481 divisor = (port->uartclk + 8 * baud) / (16 * baud);
482
483 /* enable the /16 prescaler and set the divisor */
484 mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
485 return baud;
486 }
487
488 /* Init PSC FIFO Controller */
489 static int __init mpc512x_psc_fifoc_init(void)
490 {
491 struct device_node *np;
492
493 np = of_find_compatible_node(NULL, NULL,
494 "fsl,mpc5121-psc-fifo");
495 if (!np) {
496 pr_err("%s: Can't find FIFOC node\n", __func__);
497 return -ENODEV;
498 }
499
500 psc_fifoc = of_iomap(np, 0);
501 if (!psc_fifoc) {
502 pr_err("%s: Can't map FIFOC\n", __func__);
503 of_node_put(np);
504 return -ENODEV;
505 }
506
507 psc_fifoc_irq = irq_of_parse_and_map(np, 0);
508 of_node_put(np);
509 if (psc_fifoc_irq == NO_IRQ) {
510 pr_err("%s: Can't get FIFOC irq\n", __func__);
511 iounmap(psc_fifoc);
512 return -ENODEV;
513 }
514
515 return 0;
516 }
517
518 static void __exit mpc512x_psc_fifoc_uninit(void)
519 {
520 iounmap(psc_fifoc);
521 }
522
523 /* 512x specific interrupt handler. The caller holds the port lock */
524 static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port)
525 {
526 unsigned long fifoc_int;
527 int psc_num;
528
529 /* Read pending PSC FIFOC interrupts */
530 fifoc_int = in_be32(&psc_fifoc->fifoc_int);
531
532 /* Check if it is an interrupt for this port */
533 psc_num = (port->mapbase & 0xf00) >> 8;
534 if (test_bit(psc_num, &fifoc_int) ||
535 test_bit(psc_num + 16, &fifoc_int))
536 return mpc5xxx_uart_process_int(port);
537
538 return IRQ_NONE;
539 }
540
541 static int mpc512x_psc_clock(struct uart_port *port, int enable)
542 {
543 struct clk *psc_clk;
544 int psc_num;
545 char clk_name[10];
546
547 if (uart_console(port))
548 return 0;
549
550 psc_num = (port->mapbase & 0xf00) >> 8;
551 snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
552 psc_clk = clk_get(port->dev, clk_name);
553 if (IS_ERR(psc_clk)) {
554 dev_err(port->dev, "Failed to get PSC clock entry!\n");
555 return -ENODEV;
556 }
557
558 dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis");
559
560 if (enable)
561 clk_enable(psc_clk);
562 else
563 clk_disable(psc_clk);
564
565 return 0;
566 }
567
568 static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np)
569 {
570 port->irqflags = IRQF_SHARED;
571 port->irq = psc_fifoc_irq;
572 }
573
574 static struct psc_ops mpc512x_psc_ops = {
575 .fifo_init = mpc512x_psc_fifo_init,
576 .raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
577 .raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
578 .rx_rdy = mpc512x_psc_rx_rdy,
579 .tx_rdy = mpc512x_psc_tx_rdy,
580 .tx_empty = mpc512x_psc_tx_empty,
581 .stop_rx = mpc512x_psc_stop_rx,
582 .start_tx = mpc512x_psc_start_tx,
583 .stop_tx = mpc512x_psc_stop_tx,
584 .rx_clr_irq = mpc512x_psc_rx_clr_irq,
585 .tx_clr_irq = mpc512x_psc_tx_clr_irq,
586 .write_char = mpc512x_psc_write_char,
587 .read_char = mpc512x_psc_read_char,
588 .cw_disable_ints = mpc512x_psc_cw_disable_ints,
589 .cw_restore_ints = mpc512x_psc_cw_restore_ints,
590 .set_baudrate = mpc512x_psc_set_baudrate,
591 .clock = mpc512x_psc_clock,
592 .fifoc_init = mpc512x_psc_fifoc_init,
593 .fifoc_uninit = mpc512x_psc_fifoc_uninit,
594 .get_irq = mpc512x_psc_get_irq,
595 .handle_irq = mpc512x_psc_handle_irq,
596 };
597 #endif
598
599 static struct psc_ops *psc_ops;
600
601 /* ======================================================================== */
602 /* UART operations */
603 /* ======================================================================== */
604
605 static unsigned int
606 mpc52xx_uart_tx_empty(struct uart_port *port)
607 {
608 return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0;
609 }
610
611 static void
612 mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
613 {
614 if (mctrl & TIOCM_RTS)
615 out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
616 else
617 out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
618 }
619
620 static unsigned int
621 mpc52xx_uart_get_mctrl(struct uart_port *port)
622 {
623 unsigned int ret = TIOCM_DSR;
624 u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
625
626 if (!(status & MPC52xx_PSC_CTS))
627 ret |= TIOCM_CTS;
628 if (!(status & MPC52xx_PSC_DCD))
629 ret |= TIOCM_CAR;
630
631 return ret;
632 }
633
634 static void
635 mpc52xx_uart_stop_tx(struct uart_port *port)
636 {
637 /* port->lock taken by caller */
638 psc_ops->stop_tx(port);
639 }
640
641 static void
642 mpc52xx_uart_start_tx(struct uart_port *port)
643 {
644 /* port->lock taken by caller */
645 psc_ops->start_tx(port);
646 }
647
648 static void
649 mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
650 {
651 unsigned long flags;
652 spin_lock_irqsave(&port->lock, flags);
653
654 port->x_char = ch;
655 if (ch) {
656 /* Make sure tx interrupts are on */
657 /* Truly necessary ??? They should be anyway */
658 psc_ops->start_tx(port);
659 }
660
661 spin_unlock_irqrestore(&port->lock, flags);
662 }
663
664 static void
665 mpc52xx_uart_stop_rx(struct uart_port *port)
666 {
667 /* port->lock taken by caller */
668 psc_ops->stop_rx(port);
669 }
670
671 static void
672 mpc52xx_uart_enable_ms(struct uart_port *port)
673 {
674 struct mpc52xx_psc __iomem *psc = PSC(port);
675
676 /* clear D_*-bits by reading them */
677 in_8(&psc->mpc52xx_psc_ipcr);
678 /* enable CTS and DCD as IPC interrupts */
679 out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
680
681 port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
682 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
683 }
684
685 static void
686 mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
687 {
688 unsigned long flags;
689 spin_lock_irqsave(&port->lock, flags);
690
691 if (ctl == -1)
692 out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
693 else
694 out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
695
696 spin_unlock_irqrestore(&port->lock, flags);
697 }
698
699 static int
700 mpc52xx_uart_startup(struct uart_port *port)
701 {
702 struct mpc52xx_psc __iomem *psc = PSC(port);
703 int ret;
704
705 if (psc_ops->clock) {
706 ret = psc_ops->clock(port, 1);
707 if (ret)
708 return ret;
709 }
710
711 /* Request IRQ */
712 ret = request_irq(port->irq, mpc52xx_uart_int,
713 port->irqflags, "mpc52xx_psc_uart", port);
714 if (ret)
715 return ret;
716
717 /* Reset/activate the port, clear and enable interrupts */
718 out_8(&psc->command, MPC52xx_PSC_RST_RX);
719 out_8(&psc->command, MPC52xx_PSC_RST_TX);
720
721 out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
722
723 psc_ops->fifo_init(port);
724
725 out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
726 out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
727
728 return 0;
729 }
730
731 static void
732 mpc52xx_uart_shutdown(struct uart_port *port)
733 {
734 struct mpc52xx_psc __iomem *psc = PSC(port);
735
736 /* Shut down the port. Leave TX active if on a console port */
737 out_8(&psc->command, MPC52xx_PSC_RST_RX);
738 if (!uart_console(port))
739 out_8(&psc->command, MPC52xx_PSC_RST_TX);
740
741 port->read_status_mask = 0;
742 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
743
744 if (psc_ops->clock)
745 psc_ops->clock(port, 0);
746
747 /* Release interrupt */
748 free_irq(port->irq, port);
749 }
750
751 static void
752 mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
753 struct ktermios *old)
754 {
755 struct mpc52xx_psc __iomem *psc = PSC(port);
756 unsigned long flags;
757 unsigned char mr1, mr2;
758 unsigned int j;
759 unsigned int baud;
760
761 /* Prepare what we're gonna write */
762 mr1 = 0;
763
764 switch (new->c_cflag & CSIZE) {
765 case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
766 break;
767 case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
768 break;
769 case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
770 break;
771 case CS8:
772 default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
773 }
774
775 if (new->c_cflag & PARENB) {
776 mr1 |= (new->c_cflag & PARODD) ?
777 MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
778 } else
779 mr1 |= MPC52xx_PSC_MODE_PARNONE;
780
781
782 mr2 = 0;
783
784 if (new->c_cflag & CSTOPB)
785 mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
786 else
787 mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
788 MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
789 MPC52xx_PSC_MODE_ONE_STOP;
790
791 if (new->c_cflag & CRTSCTS) {
792 mr1 |= MPC52xx_PSC_MODE_RXRTS;
793 mr2 |= MPC52xx_PSC_MODE_TXCTS;
794 }
795
796 /* Get the lock */
797 spin_lock_irqsave(&port->lock, flags);
798
799 /* Do our best to flush TX & RX, so we don't lose anything */
800 /* But we don't wait indefinitely ! */
801 j = 5000000; /* Maximum wait */
802 /* FIXME Can't receive chars since set_termios might be called at early
803 * boot for the console, all stuff is not yet ready to receive at that
804 * time and that just makes the kernel oops */
805 /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
806 while (!mpc52xx_uart_tx_empty(port) && --j)
807 udelay(1);
808
809 if (!j)
810 printk(KERN_ERR "mpc52xx_uart.c: "
811 "Unable to flush RX & TX fifos in-time in set_termios."
812 "Some chars may have been lost.\n");
813
814 /* Reset the TX & RX */
815 out_8(&psc->command, MPC52xx_PSC_RST_RX);
816 out_8(&psc->command, MPC52xx_PSC_RST_TX);
817
818 /* Send new mode settings */
819 out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
820 out_8(&psc->mode, mr1);
821 out_8(&psc->mode, mr2);
822 baud = psc_ops->set_baudrate(port, new, old);
823
824 /* Update the per-port timeout */
825 uart_update_timeout(port, new->c_cflag, baud);
826
827 if (UART_ENABLE_MS(port, new->c_cflag))
828 mpc52xx_uart_enable_ms(port);
829
830 /* Reenable TX & RX */
831 out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
832 out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
833
834 /* We're all set, release the lock */
835 spin_unlock_irqrestore(&port->lock, flags);
836 }
837
838 static const char *
839 mpc52xx_uart_type(struct uart_port *port)
840 {
841 /*
842 * We keep using PORT_MPC52xx for historic reasons although it applies
843 * for MPC512x, too, but print "MPC5xxx" to not irritate users
844 */
845 return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL;
846 }
847
848 static void
849 mpc52xx_uart_release_port(struct uart_port *port)
850 {
851 /* remapped by us ? */
852 if (port->flags & UPF_IOREMAP) {
853 iounmap(port->membase);
854 port->membase = NULL;
855 }
856
857 release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
858 }
859
860 static int
861 mpc52xx_uart_request_port(struct uart_port *port)
862 {
863 int err;
864
865 if (port->flags & UPF_IOREMAP) /* Need to remap ? */
866 port->membase = ioremap(port->mapbase,
867 sizeof(struct mpc52xx_psc));
868
869 if (!port->membase)
870 return -EINVAL;
871
872 err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
873 "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
874
875 if (err && (port->flags & UPF_IOREMAP)) {
876 iounmap(port->membase);
877 port->membase = NULL;
878 }
879
880 return err;
881 }
882
883 static void
884 mpc52xx_uart_config_port(struct uart_port *port, int flags)
885 {
886 if ((flags & UART_CONFIG_TYPE)
887 && (mpc52xx_uart_request_port(port) == 0))
888 port->type = PORT_MPC52xx;
889 }
890
891 static int
892 mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
893 {
894 if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
895 return -EINVAL;
896
897 if ((ser->irq != port->irq) ||
898 (ser->io_type != UPIO_MEM) ||
899 (ser->baud_base != port->uartclk) ||
900 (ser->iomem_base != (void *)port->mapbase) ||
901 (ser->hub6 != 0))
902 return -EINVAL;
903
904 return 0;
905 }
906
907
908 static struct uart_ops mpc52xx_uart_ops = {
909 .tx_empty = mpc52xx_uart_tx_empty,
910 .set_mctrl = mpc52xx_uart_set_mctrl,
911 .get_mctrl = mpc52xx_uart_get_mctrl,
912 .stop_tx = mpc52xx_uart_stop_tx,
913 .start_tx = mpc52xx_uart_start_tx,
914 .send_xchar = mpc52xx_uart_send_xchar,
915 .stop_rx = mpc52xx_uart_stop_rx,
916 .enable_ms = mpc52xx_uart_enable_ms,
917 .break_ctl = mpc52xx_uart_break_ctl,
918 .startup = mpc52xx_uart_startup,
919 .shutdown = mpc52xx_uart_shutdown,
920 .set_termios = mpc52xx_uart_set_termios,
921 /* .pm = mpc52xx_uart_pm, Not supported yet */
922 /* .set_wake = mpc52xx_uart_set_wake, Not supported yet */
923 .type = mpc52xx_uart_type,
924 .release_port = mpc52xx_uart_release_port,
925 .request_port = mpc52xx_uart_request_port,
926 .config_port = mpc52xx_uart_config_port,
927 .verify_port = mpc52xx_uart_verify_port
928 };
929
930
931 /* ======================================================================== */
932 /* Interrupt handling */
933 /* ======================================================================== */
934
935 static inline int
936 mpc52xx_uart_int_rx_chars(struct uart_port *port)
937 {
938 struct tty_struct *tty = port->state->port.tty;
939 unsigned char ch, flag;
940 unsigned short status;
941
942 /* While we can read, do so ! */
943 while (psc_ops->raw_rx_rdy(port)) {
944 /* Get the char */
945 ch = psc_ops->read_char(port);
946
947 /* Handle sysreq char */
948 #ifdef SUPPORT_SYSRQ
949 if (uart_handle_sysrq_char(port, ch)) {
950 port->sysrq = 0;
951 continue;
952 }
953 #endif
954
955 /* Store it */
956
957 flag = TTY_NORMAL;
958 port->icount.rx++;
959
960 status = in_be16(&PSC(port)->mpc52xx_psc_status);
961
962 if (status & (MPC52xx_PSC_SR_PE |
963 MPC52xx_PSC_SR_FE |
964 MPC52xx_PSC_SR_RB)) {
965
966 if (status & MPC52xx_PSC_SR_RB) {
967 flag = TTY_BREAK;
968 uart_handle_break(port);
969 port->icount.brk++;
970 } else if (status & MPC52xx_PSC_SR_PE) {
971 flag = TTY_PARITY;
972 port->icount.parity++;
973 }
974 else if (status & MPC52xx_PSC_SR_FE) {
975 flag = TTY_FRAME;
976 port->icount.frame++;
977 }
978
979 /* Clear error condition */
980 out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
981
982 }
983 tty_insert_flip_char(tty, ch, flag);
984 if (status & MPC52xx_PSC_SR_OE) {
985 /*
986 * Overrun is special, since it's
987 * reported immediately, and doesn't
988 * affect the current character
989 */
990 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
991 port->icount.overrun++;
992 }
993 }
994
995 spin_unlock(&port->lock);
996 tty_flip_buffer_push(tty);
997 spin_lock(&port->lock);
998
999 return psc_ops->raw_rx_rdy(port);
1000 }
1001
1002 static inline int
1003 mpc52xx_uart_int_tx_chars(struct uart_port *port)
1004 {
1005 struct circ_buf *xmit = &port->state->xmit;
1006
1007 /* Process out of band chars */
1008 if (port->x_char) {
1009 psc_ops->write_char(port, port->x_char);
1010 port->icount.tx++;
1011 port->x_char = 0;
1012 return 1;
1013 }
1014
1015 /* Nothing to do ? */
1016 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
1017 mpc52xx_uart_stop_tx(port);
1018 return 0;
1019 }
1020
1021 /* Send chars */
1022 while (psc_ops->raw_tx_rdy(port)) {
1023 psc_ops->write_char(port, xmit->buf[xmit->tail]);
1024 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
1025 port->icount.tx++;
1026 if (uart_circ_empty(xmit))
1027 break;
1028 }
1029
1030 /* Wake up */
1031 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1032 uart_write_wakeup(port);
1033
1034 /* Maybe we're done after all */
1035 if (uart_circ_empty(xmit)) {
1036 mpc52xx_uart_stop_tx(port);
1037 return 0;
1038 }
1039
1040 return 1;
1041 }
1042
1043 static irqreturn_t
1044 mpc5xxx_uart_process_int(struct uart_port *port)
1045 {
1046 unsigned long pass = ISR_PASS_LIMIT;
1047 unsigned int keepgoing;
1048 u8 status;
1049
1050 /* While we have stuff to do, we continue */
1051 do {
1052 /* If we don't find anything to do, we stop */
1053 keepgoing = 0;
1054
1055 psc_ops->rx_clr_irq(port);
1056 if (psc_ops->rx_rdy(port))
1057 keepgoing |= mpc52xx_uart_int_rx_chars(port);
1058
1059 psc_ops->tx_clr_irq(port);
1060 if (psc_ops->tx_rdy(port))
1061 keepgoing |= mpc52xx_uart_int_tx_chars(port);
1062
1063 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
1064 if (status & MPC52xx_PSC_D_DCD)
1065 uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
1066
1067 if (status & MPC52xx_PSC_D_CTS)
1068 uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
1069
1070 /* Limit number of iteration */
1071 if (!(--pass))
1072 keepgoing = 0;
1073
1074 } while (keepgoing);
1075
1076 return IRQ_HANDLED;
1077 }
1078
1079 static irqreturn_t
1080 mpc52xx_uart_int(int irq, void *dev_id)
1081 {
1082 struct uart_port *port = dev_id;
1083 irqreturn_t ret;
1084
1085 spin_lock(&port->lock);
1086
1087 ret = psc_ops->handle_irq(port);
1088
1089 spin_unlock(&port->lock);
1090
1091 return ret;
1092 }
1093
1094 /* ======================================================================== */
1095 /* Console ( if applicable ) */
1096 /* ======================================================================== */
1097
1098 #ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
1099
1100 static void __init
1101 mpc52xx_console_get_options(struct uart_port *port,
1102 int *baud, int *parity, int *bits, int *flow)
1103 {
1104 struct mpc52xx_psc __iomem *psc = PSC(port);
1105 unsigned char mr1;
1106
1107 pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
1108
1109 /* Read the mode registers */
1110 out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
1111 mr1 = in_8(&psc->mode);
1112
1113 /* CT{U,L}R are write-only ! */
1114 *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
1115
1116 /* Parse them */
1117 switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
1118 case MPC52xx_PSC_MODE_5_BITS:
1119 *bits = 5;
1120 break;
1121 case MPC52xx_PSC_MODE_6_BITS:
1122 *bits = 6;
1123 break;
1124 case MPC52xx_PSC_MODE_7_BITS:
1125 *bits = 7;
1126 break;
1127 case MPC52xx_PSC_MODE_8_BITS:
1128 default:
1129 *bits = 8;
1130 }
1131
1132 if (mr1 & MPC52xx_PSC_MODE_PARNONE)
1133 *parity = 'n';
1134 else
1135 *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
1136 }
1137
1138 static void
1139 mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
1140 {
1141 struct uart_port *port = &mpc52xx_uart_ports[co->index];
1142 unsigned int i, j;
1143
1144 /* Disable interrupts */
1145 psc_ops->cw_disable_ints(port);
1146
1147 /* Wait the TX buffer to be empty */
1148 j = 5000000; /* Maximum wait */
1149 while (!mpc52xx_uart_tx_empty(port) && --j)
1150 udelay(1);
1151
1152 /* Write all the chars */
1153 for (i = 0; i < count; i++, s++) {
1154 /* Line return handling */
1155 if (*s == '\n')
1156 psc_ops->write_char(port, '\r');
1157
1158 /* Send the char */
1159 psc_ops->write_char(port, *s);
1160
1161 /* Wait the TX buffer to be empty */
1162 j = 20000; /* Maximum wait */
1163 while (!mpc52xx_uart_tx_empty(port) && --j)
1164 udelay(1);
1165 }
1166
1167 /* Restore interrupt state */
1168 psc_ops->cw_restore_ints(port);
1169 }
1170
1171
1172 static int __init
1173 mpc52xx_console_setup(struct console *co, char *options)
1174 {
1175 struct uart_port *port = &mpc52xx_uart_ports[co->index];
1176 struct device_node *np = mpc52xx_uart_nodes[co->index];
1177 unsigned int uartclk;
1178 struct resource res;
1179 int ret;
1180
1181 int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
1182 int bits = 8;
1183 int parity = 'n';
1184 int flow = 'n';
1185
1186 pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
1187 co, co->index, options);
1188
1189 if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
1190 pr_debug("PSC%x out of range\n", co->index);
1191 return -EINVAL;
1192 }
1193
1194 if (!np) {
1195 pr_debug("PSC%x not found in device tree\n", co->index);
1196 return -EINVAL;
1197 }
1198
1199 pr_debug("Console on ttyPSC%x is %s\n",
1200 co->index, mpc52xx_uart_nodes[co->index]->full_name);
1201
1202 /* Fetch register locations */
1203 ret = of_address_to_resource(np, 0, &res);
1204 if (ret) {
1205 pr_debug("Could not get resources for PSC%x\n", co->index);
1206 return ret;
1207 }
1208
1209 uartclk = mpc5xxx_get_bus_frequency(np);
1210 if (uartclk == 0) {
1211 pr_debug("Could not find uart clock frequency!\n");
1212 return -EINVAL;
1213 }
1214
1215 /* Basic port init. Needed since we use some uart_??? func before
1216 * real init for early access */
1217 spin_lock_init(&port->lock);
1218 port->uartclk = uartclk;
1219 port->ops = &mpc52xx_uart_ops;
1220 port->mapbase = res.start;
1221 port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
1222 port->irq = irq_of_parse_and_map(np, 0);
1223
1224 if (port->membase == NULL)
1225 return -EINVAL;
1226
1227 pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
1228 (void *)port->mapbase, port->membase,
1229 port->irq, port->uartclk);
1230
1231 /* Setup the port parameters accoding to options */
1232 if (options)
1233 uart_parse_options(options, &baud, &parity, &bits, &flow);
1234 else
1235 mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
1236
1237 pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
1238 baud, bits, parity, flow);
1239
1240 return uart_set_options(port, co, baud, parity, bits, flow);
1241 }
1242
1243
1244 static struct uart_driver mpc52xx_uart_driver;
1245
1246 static struct console mpc52xx_console = {
1247 .name = "ttyPSC",
1248 .write = mpc52xx_console_write,
1249 .device = uart_console_device,
1250 .setup = mpc52xx_console_setup,
1251 .flags = CON_PRINTBUFFER,
1252 .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */
1253 .data = &mpc52xx_uart_driver,
1254 };
1255
1256
1257 static int __init
1258 mpc52xx_console_init(void)
1259 {
1260 mpc52xx_uart_of_enumerate();
1261 register_console(&mpc52xx_console);
1262 return 0;
1263 }
1264
1265 console_initcall(mpc52xx_console_init);
1266
1267 #define MPC52xx_PSC_CONSOLE &mpc52xx_console
1268 #else
1269 #define MPC52xx_PSC_CONSOLE NULL
1270 #endif
1271
1272
1273 /* ======================================================================== */
1274 /* UART Driver */
1275 /* ======================================================================== */
1276
1277 static struct uart_driver mpc52xx_uart_driver = {
1278 .driver_name = "mpc52xx_psc_uart",
1279 .dev_name = "ttyPSC",
1280 .major = SERIAL_PSC_MAJOR,
1281 .minor = SERIAL_PSC_MINOR,
1282 .nr = MPC52xx_PSC_MAXNUM,
1283 .cons = MPC52xx_PSC_CONSOLE,
1284 };
1285
1286 /* ======================================================================== */
1287 /* OF Platform Driver */
1288 /* ======================================================================== */
1289
1290 static struct of_device_id mpc52xx_uart_of_match[] = {
1291 #ifdef CONFIG_PPC_MPC52xx
1292 { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
1293 { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
1294 /* binding used by old lite5200 device trees: */
1295 { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
1296 /* binding used by efika: */
1297 { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, },
1298 #endif
1299 #ifdef CONFIG_PPC_MPC512x
1300 { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, },
1301 #endif
1302 {},
1303 };
1304
1305 static int __devinit mpc52xx_uart_of_probe(struct platform_device *op)
1306 {
1307 int idx = -1;
1308 unsigned int uartclk;
1309 struct uart_port *port = NULL;
1310 struct resource res;
1311 int ret;
1312
1313 /* Check validity & presence */
1314 for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
1315 if (mpc52xx_uart_nodes[idx] == op->dev.of_node)
1316 break;
1317 if (idx >= MPC52xx_PSC_MAXNUM)
1318 return -EINVAL;
1319 pr_debug("Found %s assigned to ttyPSC%x\n",
1320 mpc52xx_uart_nodes[idx]->full_name, idx);
1321
1322 /* set the uart clock to the input clock of the psc, the different
1323 * prescalers are taken into account in the set_baudrate() methods
1324 * of the respective chip */
1325 uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
1326 if (uartclk == 0) {
1327 dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
1328 return -EINVAL;
1329 }
1330
1331 /* Init the port structure */
1332 port = &mpc52xx_uart_ports[idx];
1333
1334 spin_lock_init(&port->lock);
1335 port->uartclk = uartclk;
1336 port->fifosize = 512;
1337 port->iotype = UPIO_MEM;
1338 port->flags = UPF_BOOT_AUTOCONF |
1339 (uart_console(port) ? 0 : UPF_IOREMAP);
1340 port->line = idx;
1341 port->ops = &mpc52xx_uart_ops;
1342 port->dev = &op->dev;
1343
1344 /* Search for IRQ and mapbase */
1345 ret = of_address_to_resource(op->dev.of_node, 0, &res);
1346 if (ret)
1347 return ret;
1348
1349 port->mapbase = res.start;
1350 if (!port->mapbase) {
1351 dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
1352 return -EINVAL;
1353 }
1354
1355 psc_ops->get_irq(port, op->dev.of_node);
1356 if (port->irq == NO_IRQ) {
1357 dev_dbg(&op->dev, "Could not get irq\n");
1358 return -EINVAL;
1359 }
1360
1361 dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
1362 (void *)port->mapbase, port->irq, port->uartclk);
1363
1364 /* Add the port to the uart sub-system */
1365 ret = uart_add_one_port(&mpc52xx_uart_driver, port);
1366 if (ret)
1367 return ret;
1368
1369 dev_set_drvdata(&op->dev, (void *)port);
1370 return 0;
1371 }
1372
1373 static int
1374 mpc52xx_uart_of_remove(struct platform_device *op)
1375 {
1376 struct uart_port *port = dev_get_drvdata(&op->dev);
1377 dev_set_drvdata(&op->dev, NULL);
1378
1379 if (port)
1380 uart_remove_one_port(&mpc52xx_uart_driver, port);
1381
1382 return 0;
1383 }
1384
1385 #ifdef CONFIG_PM
1386 static int
1387 mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
1388 {
1389 struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
1390
1391 if (port)
1392 uart_suspend_port(&mpc52xx_uart_driver, port);
1393
1394 return 0;
1395 }
1396
1397 static int
1398 mpc52xx_uart_of_resume(struct platform_device *op)
1399 {
1400 struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
1401
1402 if (port)
1403 uart_resume_port(&mpc52xx_uart_driver, port);
1404
1405 return 0;
1406 }
1407 #endif
1408
1409 static void
1410 mpc52xx_uart_of_assign(struct device_node *np)
1411 {
1412 int i;
1413
1414 /* Find the first free PSC number */
1415 for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
1416 if (mpc52xx_uart_nodes[i] == NULL) {
1417 of_node_get(np);
1418 mpc52xx_uart_nodes[i] = np;
1419 return;
1420 }
1421 }
1422 }
1423
1424 static void
1425 mpc52xx_uart_of_enumerate(void)
1426 {
1427 static int enum_done;
1428 struct device_node *np;
1429 const struct of_device_id *match;
1430 int i;
1431
1432 if (enum_done)
1433 return;
1434
1435 /* Assign index to each PSC in device tree */
1436 for_each_matching_node(np, mpc52xx_uart_of_match) {
1437 match = of_match_node(mpc52xx_uart_of_match, np);
1438 psc_ops = match->data;
1439 mpc52xx_uart_of_assign(np);
1440 }
1441
1442 enum_done = 1;
1443
1444 for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
1445 if (mpc52xx_uart_nodes[i])
1446 pr_debug("%s assigned to ttyPSC%x\n",
1447 mpc52xx_uart_nodes[i]->full_name, i);
1448 }
1449 }
1450
1451 MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
1452
1453 static struct platform_driver mpc52xx_uart_of_driver = {
1454 .probe = mpc52xx_uart_of_probe,
1455 .remove = mpc52xx_uart_of_remove,
1456 #ifdef CONFIG_PM
1457 .suspend = mpc52xx_uart_of_suspend,
1458 .resume = mpc52xx_uart_of_resume,
1459 #endif
1460 .driver = {
1461 .name = "mpc52xx-psc-uart",
1462 .owner = THIS_MODULE,
1463 .of_match_table = mpc52xx_uart_of_match,
1464 },
1465 };
1466
1467
1468 /* ======================================================================== */
1469 /* Module */
1470 /* ======================================================================== */
1471
1472 static int __init
1473 mpc52xx_uart_init(void)
1474 {
1475 int ret;
1476
1477 printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
1478
1479 ret = uart_register_driver(&mpc52xx_uart_driver);
1480 if (ret) {
1481 printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
1482 __FILE__, ret);
1483 return ret;
1484 }
1485
1486 mpc52xx_uart_of_enumerate();
1487
1488 /*
1489 * Map the PSC FIFO Controller and init if on MPC512x.
1490 */
1491 if (psc_ops && psc_ops->fifoc_init) {
1492 ret = psc_ops->fifoc_init();
1493 if (ret)
1494 return ret;
1495 }
1496
1497 ret = platform_driver_register(&mpc52xx_uart_of_driver);
1498 if (ret) {
1499 printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
1500 __FILE__, ret);
1501 uart_unregister_driver(&mpc52xx_uart_driver);
1502 return ret;
1503 }
1504
1505 return 0;
1506 }
1507
1508 static void __exit
1509 mpc52xx_uart_exit(void)
1510 {
1511 if (psc_ops->fifoc_uninit)
1512 psc_ops->fifoc_uninit();
1513
1514 platform_driver_unregister(&mpc52xx_uart_of_driver);
1515 uart_unregister_driver(&mpc52xx_uart_driver);
1516 }
1517
1518
1519 module_init(mpc52xx_uart_init);
1520 module_exit(mpc52xx_uart_exit);
1521
1522 MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
1523 MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
1524 MODULE_LICENSE("GPL");
linux-next