arch/arm/mach-omap2/usb-tusb6010.c

   1 /*
   2  * linux/arch/arm/mach-omap2/usb-tusb6010.c
   3  *
   4  * Copyright (C) 2006 Nokia Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/types.h>
  12 #include <linux/errno.h>
  13 #include <linux/delay.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/gpio.h>
  16
  17 #include <linux/usb/musb.h>
  18
  19 #include <plat/gpmc.h>
  20 #include <plat/mux.h>
  21
  22
  23 static u8               async_cs, sync_cs;
  24 static unsigned         refclk_psec;
  25
  26
  27 /* t2_ps, when quantized to fclk units, must happen no earlier than
  28  * the clock after after t1_NS.
  29  *
  30  * Return a possibly updated value of t2_ps, converted to nsec.
  31  */
  32 static unsigned
  33 next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps)
  34 {
  35         unsigned        t1_ps = t1_NS * 1000;
  36         unsigned        t1_f, t2_f;
  37
  38         if ((t1_ps + fclk_ps) < t2_ps)
  39                 return t2_ps / 1000;
  40
  41         t1_f = (t1_ps + fclk_ps - 1) / fclk_ps;
  42         t2_f = (t2_ps + fclk_ps - 1) / fclk_ps;
  43
  44         if (t1_f >= t2_f)
  45                 t2_f = t1_f + 1;
  46
  47         return (t2_f * fclk_ps) / 1000;
  48 }
  49
  50 /* NOTE:  timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
  51
  52 static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps)
  53 {
  54         struct gpmc_timings     t;
  55         unsigned                t_acsnh_advnh = sysclk_ps + 3000;
  56         unsigned                tmp;
  57
  58         memset(&t, 0, sizeof(t));
  59
  60         /* CS_ON = t_acsnh_acsnl */
  61         t.cs_on = 8;
  62         /* ADV_ON = t_acsnh_advnh - t_advn */
  63         t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps);
  64
  65         /*
  66          * READ ... from omap2420 TRM fig 12-13
  67          */
  68
  69         /* ADV_RD_OFF = t_acsnh_advnh */
  70         t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps);
  71
  72         /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */
  73         t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps);
  74
  75         /* ACCESS = counters continue only after nRDY */
  76         tmp = t.oe_on * 1000 + 300;
  77         t.access = next_clk(t.oe_on, tmp, fclk_ps);
  78
  79         /* OE_OFF = after data gets sampled */
  80         tmp = t.access * 1000;
  81         t.oe_off = next_clk(t.access, tmp, fclk_ps);
  82
  83         t.cs_rd_off = t.oe_off;
  84
  85         tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */;
  86         t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
  87
  88         /*
  89          * WRITE ... from omap2420 TRM fig 12-15
  90          */
  91
  92         /* ADV_WR_OFF = t_acsnh_advnh */
  93         t.adv_wr_off = t.adv_rd_off;
  94
  95         /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */
  96         t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps);
  97
  98         /* WE_OFF = after data gets sampled */
  99         tmp = t.we_on * 1000 + 300;
 100         t.we_off = next_clk(t.we_on, tmp, fclk_ps);
 101
 102         t.cs_wr_off = t.we_off;
 103
 104         tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */;
 105         t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
 106
 107         return gpmc_cs_set_timings(async_cs, &t);
 108 }
 109
 110 static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
 111 {
 112         struct gpmc_timings     t;
 113         unsigned                t_scsnh_advnh = sysclk_ps + 3000;
 114         unsigned                tmp;
 115
 116         memset(&t, 0, sizeof(t));
 117         t.cs_on = 8;
 118
 119         /* ADV_ON = t_acsnh_advnh - t_advn */
 120         t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
 121
 122         /* GPMC_CLK rate = fclk rate / div */
 123         t.sync_clk = 12 /* 11.1 nsec */;
 124         tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps;
 125         if (tmp > 4)
 126                 return -ERANGE;
 127         if (tmp <= 0)
 128                 tmp = 1;
 129         t.page_burst_access = (fclk_ps * tmp) / 1000;
 130
 131         /*
 132          * READ ... based on omap2420 TRM fig 12-19, 12-20
 133          */
 134
 135         /* ADV_RD_OFF = t_scsnh_advnh */
 136         t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps);
 137
 138         /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */
 139         tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps);
 140         t.oe_on = next_clk(t.adv_on, tmp, fclk_ps);
 141
 142         /* ACCESS = number of clock cycles after t_adv_eon */
 143         tmp = (t.oe_on * 1000) + (5 * fclk_ps);
 144         t.access = next_clk(t.oe_on, tmp, fclk_ps);
 145
 146         /* OE_OFF = after data gets sampled */
 147         tmp = (t.access * 1000) + (1 * fclk_ps);
 148         t.oe_off = next_clk(t.access, tmp, fclk_ps);
 149
 150         t.cs_rd_off = t.oe_off;
 151
 152         tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */;
 153         t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
 154
 155         /*
 156          * WRITE ... based on omap2420 TRM fig 12-21
 157          */
 158
 159         /* ADV_WR_OFF = t_scsnh_advnh */
 160         t.adv_wr_off = t.adv_rd_off;
 161
 162         /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */
 163         tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps);
 164         t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps);
 165
 166         /* WE_OFF = number of clock cycles after t_adv_wen */
 167         tmp = (t.we_on * 1000) + (6 * fclk_ps);
 168         t.we_off = next_clk(t.we_on, tmp, fclk_ps);
 169
 170         t.cs_wr_off = t.we_off;
 171
 172         tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */;
 173         t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
 174
 175         return gpmc_cs_set_timings(sync_cs, &t);
 176 }
 177
 178 extern unsigned long gpmc_get_fclk_period(void);
 179
 180 /* tusb driver calls this when it changes the chip's clocking */
 181 int tusb6010_platform_retime(unsigned is_refclk)
 182 {
 183         static const char       error[] =
 184                 KERN_ERR "tusb6010 %s retime error %d\n";
 185
 186         unsigned        fclk_ps = gpmc_get_fclk_period();
 187         unsigned        sysclk_ps;
 188         int             status;
 189
 190         if (!refclk_psec || fclk_ps == 0)
 191                 return -ENODEV;
 192
 193         sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
 194
 195         status = tusb_set_async_mode(sysclk_ps, fclk_ps);
 196         if (status < 0) {
 197                 printk(error, "async", status);
 198                 goto done;
 199         }
 200         status = tusb_set_sync_mode(sysclk_ps, fclk_ps);
 201         if (status < 0)
 202                 printk(error, "sync", status);
 203 done:
 204         return status;
 205 }
 206 EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
 207
 208 static struct resource tusb_resources[] = {
 209         /* Order is significant!  The start/end fields
 210          * are updated during setup..
 211          */
 212         { /* Asynchronous access */
 213                 .flags  = IORESOURCE_MEM,
 214         },
 215         { /* Synchronous access */
 216                 .flags  = IORESOURCE_MEM,
 217         },
 218         { /* IRQ */
 219                 .flags  = IORESOURCE_IRQ,
 220         },
 221 };
 222
 223 static u64 tusb_dmamask = ~(u32)0;
 224
 225 static struct platform_device tusb_device = {
 226         .name           = "musb_hdrc",
 227         .id             = -1,
 228         .dev = {
 229                 .dma_mask               = &tusb_dmamask,
 230                 .coherent_dma_mask      = 0xffffffff,
 231         },
 232         .num_resources  = ARRAY_SIZE(tusb_resources),
 233         .resource       = tusb_resources,
 234 };
 235
 236
 237 /* this may be called only from board-*.c setup code */
 238 int __init
 239 tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 240                 unsigned ps_refclk, unsigned waitpin,
 241                 unsigned async, unsigned sync,
 242                 unsigned irq, unsigned dmachan)
 243 {
 244         int             status;
 245         static char     error[] __initdata =
 246                 KERN_ERR "tusb6010 init error %d, %d\n";
 247
 248         /* ASYNC region, primarily for PIO */
 249         status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
 250                                 &tusb_resources[0].start);
 251         if (status < 0) {
 252                 printk(error, 1, status);
 253                 return status;
 254         }
 255         tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
 256         async_cs = async;
 257         gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
 258                           GPMC_CONFIG1_PAGE_LEN(2)
 259                         | GPMC_CONFIG1_WAIT_READ_MON
 260                         | GPMC_CONFIG1_WAIT_WRITE_MON
 261                         | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
 262                         | GPMC_CONFIG1_READTYPE_ASYNC
 263                         | GPMC_CONFIG1_WRITETYPE_ASYNC
 264                         | GPMC_CONFIG1_DEVICESIZE_16
 265                         | GPMC_CONFIG1_DEVICETYPE_NOR
 266                         | GPMC_CONFIG1_MUXADDDATA);
 267
 268
 269         /* SYNC region, primarily for DMA */
 270         status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
 271                                 &tusb_resources[1].start);
 272         if (status < 0) {
 273                 printk(error, 2, status);
 274                 return status;
 275         }
 276         tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
 277         sync_cs = sync;
 278         gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
 279                           GPMC_CONFIG1_READMULTIPLE_SUPP
 280                         | GPMC_CONFIG1_READTYPE_SYNC
 281                         | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
 282                         | GPMC_CONFIG1_WRITETYPE_SYNC
 283                         | GPMC_CONFIG1_CLKACTIVATIONTIME(1)
 284                         | GPMC_CONFIG1_PAGE_LEN(2)
 285                         | GPMC_CONFIG1_WAIT_READ_MON
 286                         | GPMC_CONFIG1_WAIT_WRITE_MON
 287                         | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
 288                         | GPMC_CONFIG1_DEVICESIZE_16
 289                         | GPMC_CONFIG1_DEVICETYPE_NOR
 290                         | GPMC_CONFIG1_MUXADDDATA
 291                         /* fclk divider gets set later */
 292                         );
 293
 294         /* IRQ */
 295         status = gpio_request(irq, "TUSB6010 irq");
 296         if (status < 0) {
 297                 printk(error, 3, status);
 298                 return status;
 299         }
 300         gpio_direction_input(irq);
 301         tusb_resources[2].start = irq + IH_GPIO_BASE;
 302
 303         /* set up memory timings ... can speed them up later */
 304         if (!ps_refclk) {
 305                 printk(error, 4, status);
 306                 return -ENODEV;
 307         }
 308         refclk_psec = ps_refclk;
 309         status = tusb6010_platform_retime(1);
 310         if (status < 0) {
 311                 printk(error, 5, status);
 312                 return status;
 313         }
 314
 315         /* finish device setup ... */
 316         if (!data) {
 317                 printk(error, 6, status);
 318                 return -ENODEV;
 319         }
 320         tusb_device.dev.platform_data = data;
 321
 322         /* REVISIT let the driver know what DMA channels work */
 323         if (!dmachan)
 324                 tusb_device.dev.dma_mask = NULL;
 325         else {
 326                 /* assume OMAP 2420 ES2.0 and later */
 327                 if (dmachan & (1 << 0))
 328                         omap_cfg_reg(AA10_242X_DMAREQ0);
 329                 if (dmachan & (1 << 1))
 330                         omap_cfg_reg(AA6_242X_DMAREQ1);
 331                 if (dmachan & (1 << 2))
 332                         omap_cfg_reg(E4_242X_DMAREQ2);
 333                 if (dmachan & (1 << 3))
 334                         omap_cfg_reg(G4_242X_DMAREQ3);
 335                 if (dmachan & (1 << 4))
 336                         omap_cfg_reg(D3_242X_DMAREQ4);
 337                 if (dmachan & (1 << 5))
 338                         omap_cfg_reg(E3_242X_DMAREQ5);
 339         }
 340
 341         /* so far so good ... register the device */
 342         status = platform_device_register(&tusb_device);
 343         if (status < 0) {
 344                 printk(error, 7, status);
 345                 return status;
 346         }
 347         return 0;
 348 }