2 * Code to handle IP32 IRQs
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
8 * Copyright (C) 2000 Harald Koerfgen
9 * Copyright (C) 2001 Keith M Wesolowski
11 #include <linux/init.h>
12 #include <linux/kernel_stat.h>
13 #include <linux/types.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/bitops.h>
17 #include <linux/kernel.h>
18 #include <linux/slab.h>
20 #include <linux/random.h>
21 #include <linux/sched.h>
23 #include <asm/mipsregs.h>
24 #include <asm/signal.h>
25 #include <asm/system.h>
27 #include <asm/ip32/crime.h>
28 #include <asm/ip32/mace.h>
29 #include <asm/ip32/ip32_ints.h>
31 /* issue a PIO read to make sure no PIO writes are pending */
32 static void inline flush_crime_bus(void)
34 volatile unsigned long junk
= crime
->control
;
37 static void inline flush_mace_bus(void)
39 volatile unsigned long junk
= mace
->perif
.ctrl
.misc
;
44 #define DBG(x...) printk(x)
51 * IP0 -> software (ignored)
52 * IP1 -> software (ignored)
53 * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ???
54 * IP3 -> (irq1) X unknown
55 * IP4 -> (irq2) X unknown
56 * IP5 -> (irq3) X unknown
57 * IP6 -> (irq4) X unknown
58 * IP7 -> (irq5) 0 CPU count/compare timer (system timer)
62 * CRIME_INT_STAT 31:0:
67 * 3 -> 4 Mace ethernet
68 * 4 -> S SuperIO sub-interrupt
69 * 5 -> M Miscellaneous sub-interrupt
70 * 6 -> A Audio sub-interrupt
71 * 7 -> 8 PCI bridge errors
72 * 8 -> 9 PCI SCSI aic7xxx 0
73 * 9 -> 10 PCI SCSI aic7xxx 1
75 * 11 -> 12 unused (PCI slot 1)
76 * 12 -> 13 unused (PCI slot 2)
77 * 13 -> 14 unused (PCI shared 0)
78 * 14 -> 15 unused (PCI shared 1)
79 * 15 -> 16 unused (PCI shared 2)
85 * 21 -> 22 Memory errors
86 * 22 -> 23 RE empty edge (E)
87 * 23 -> 24 RE full edge (E)
88 * 24 -> 25 RE idle edge (E)
89 * 25 -> 26 RE empty level
90 * 26 -> 27 RE full level
91 * 27 -> 28 RE idle level
92 * 28 -> 29 unused (software 0) (E)
93 * 29 -> 30 unused (software 1) (E)
94 * 30 -> 31 unused (software 2) - crime 1.5 CPU SysCorError (E)
97 * S, M, A: Use the MACE ISA interrupt register
98 * MACE_ISA_INT_STAT 31:0
103 * 10 -> X Keyboard polled
105 * 12 -> X Mouse polled
106 * 13-15 -> 46-48 Count/compare timers
107 * 16-19 -> 49-52 Parallel (16 E)
108 * 20-25 -> 53-58 Serial 1 (22 E)
109 * 26-31 -> 59-64 Serial 2 (28 E)
111 * Note that this means IRQs 5-7, 43, and 45 do not exist. This is a
112 * different IRQ map than IRIX uses, but that's OK as Linux irq handling
113 * is quite different anyway.
117 * IRQ spinlock - Ralf says not to disable CPU interrupts,
118 * and I think he knows better.
120 static DEFINE_SPINLOCK(ip32_irq_lock
);
122 /* Some initial interrupts to set up */
123 extern irqreturn_t
crime_memerr_intr (int irq
, void *dev_id
,
124 struct pt_regs
*regs
);
125 extern irqreturn_t
crime_cpuerr_intr (int irq
, void *dev_id
,
126 struct pt_regs
*regs
);
128 struct irqaction memerr_irq
= { crime_memerr_intr
, SA_INTERRUPT
,
129 CPU_MASK_NONE
, "CRIME memory error", NULL
, NULL
};
130 struct irqaction cpuerr_irq
= { crime_cpuerr_intr
, SA_INTERRUPT
,
131 CPU_MASK_NONE
, "CRIME CPU error", NULL
, NULL
};
133 extern void ip32_handle_int(void);
136 * For interrupts wired from a single device to the CPU. Only the clock
137 * uses this it seems, which is IRQ 0 and IP7.
140 static void enable_cpu_irq(unsigned int irq
)
142 set_c0_status(STATUSF_IP7
);
145 static unsigned int startup_cpu_irq(unsigned int irq
)
151 static void disable_cpu_irq(unsigned int irq
)
153 clear_c0_status(STATUSF_IP7
);
156 static void end_cpu_irq(unsigned int irq
)
158 if (!(irq_desc
[irq
].status
& (IRQ_DISABLED
| IRQ_INPROGRESS
)))
159 enable_cpu_irq (irq
);
162 #define shutdown_cpu_irq disable_cpu_irq
163 #define mask_and_ack_cpu_irq disable_cpu_irq
165 static struct hw_interrupt_type ip32_cpu_interrupt
= {
171 mask_and_ack_cpu_irq
,
177 * This is for pure CRIME interrupts - ie not MACE. The advantage?
178 * We get to split the register in half and do faster lookups.
181 static uint64_t crime_mask
;
183 static void enable_crime_irq(unsigned int irq
)
187 spin_lock_irqsave(&ip32_irq_lock
, flags
);
188 crime_mask
|= 1 << (irq
- 1);
189 crime
->imask
= crime_mask
;
190 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
193 static unsigned int startup_crime_irq(unsigned int irq
)
195 enable_crime_irq(irq
);
196 return 0; /* This is probably not right; we could have pending irqs */
199 static void disable_crime_irq(unsigned int irq
)
203 spin_lock_irqsave(&ip32_irq_lock
, flags
);
204 crime_mask
&= ~(1 << (irq
- 1));
205 crime
->imask
= crime_mask
;
207 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
210 static void mask_and_ack_crime_irq(unsigned int irq
)
214 /* Edge triggered interrupts must be cleared. */
215 if ((irq
>= CRIME_GBE0_IRQ
&& irq
<= CRIME_GBE3_IRQ
)
216 || (irq
>= CRIME_RE_EMPTY_E_IRQ
&& irq
<= CRIME_RE_IDLE_E_IRQ
)
217 || (irq
>= CRIME_SOFT0_IRQ
&& irq
<= CRIME_SOFT2_IRQ
)) {
219 spin_lock_irqsave(&ip32_irq_lock
, flags
);
220 crime_int
= crime
->hard_int
;
221 crime_int
&= ~(1 << (irq
- 1));
222 crime
->hard_int
= crime_int
;
223 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
225 disable_crime_irq(irq
);
228 static void end_crime_irq(unsigned int irq
)
230 if (!(irq_desc
[irq
].status
& (IRQ_DISABLED
| IRQ_INPROGRESS
)))
231 enable_crime_irq(irq
);
234 #define shutdown_crime_irq disable_crime_irq
236 static struct hw_interrupt_type ip32_crime_interrupt
= {
242 mask_and_ack_crime_irq
,
248 * This is for MACE PCI interrupts. We can decrease bus traffic by masking
249 * as close to the source as possible. This also means we can take the
250 * next chunk of the CRIME register in one piece.
253 static unsigned long macepci_mask
;
255 static void enable_macepci_irq(unsigned int irq
)
259 spin_lock_irqsave(&ip32_irq_lock
, flags
);
260 macepci_mask
|= MACEPCI_CONTROL_INT(irq
- 9);
261 mace
->pci
.control
= macepci_mask
;
262 crime_mask
|= 1 << (irq
- 1);
263 crime
->imask
= crime_mask
;
264 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
267 static unsigned int startup_macepci_irq(unsigned int irq
)
269 enable_macepci_irq (irq
);
273 static void disable_macepci_irq(unsigned int irq
)
277 spin_lock_irqsave(&ip32_irq_lock
, flags
);
278 crime_mask
&= ~(1 << (irq
- 1));
279 crime
->imask
= crime_mask
;
281 macepci_mask
&= ~MACEPCI_CONTROL_INT(irq
- 9);
282 mace
->pci
.control
= macepci_mask
;
284 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
287 static void end_macepci_irq(unsigned int irq
)
289 if (!(irq_desc
[irq
].status
& (IRQ_DISABLED
|IRQ_INPROGRESS
)))
290 enable_macepci_irq(irq
);
293 #define shutdown_macepci_irq disable_macepci_irq
294 #define mask_and_ack_macepci_irq disable_macepci_irq
296 static struct hw_interrupt_type ip32_macepci_interrupt
= {
299 shutdown_macepci_irq
,
302 mask_and_ack_macepci_irq
,
307 /* This is used for MACE ISA interrupts. That means bits 4-6 in the
311 #define MACEISA_AUDIO_INT (MACEISA_AUDIO_SW_INT | \
312 MACEISA_AUDIO_SC_INT | \
313 MACEISA_AUDIO1_DMAT_INT | \
314 MACEISA_AUDIO1_OF_INT | \
315 MACEISA_AUDIO2_DMAT_INT | \
316 MACEISA_AUDIO2_MERR_INT | \
317 MACEISA_AUDIO3_DMAT_INT | \
318 MACEISA_AUDIO3_MERR_INT)
319 #define MACEISA_MISC_INT (MACEISA_RTC_INT | \
321 MACEISA_KEYB_POLL_INT | \
322 MACEISA_MOUSE_INT | \
323 MACEISA_MOUSE_POLL_INT | \
324 MACEISA_TIMER0_INT | \
325 MACEISA_TIMER1_INT | \
327 #define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \
328 MACEISA_PAR_CTXA_INT | \
329 MACEISA_PAR_CTXB_INT | \
330 MACEISA_PAR_MERR_INT | \
331 MACEISA_SERIAL1_INT | \
332 MACEISA_SERIAL1_TDMAT_INT | \
333 MACEISA_SERIAL1_TDMAPR_INT | \
334 MACEISA_SERIAL1_TDMAME_INT | \
335 MACEISA_SERIAL1_RDMAT_INT | \
336 MACEISA_SERIAL1_RDMAOR_INT | \
337 MACEISA_SERIAL2_INT | \
338 MACEISA_SERIAL2_TDMAT_INT | \
339 MACEISA_SERIAL2_TDMAPR_INT | \
340 MACEISA_SERIAL2_TDMAME_INT | \
341 MACEISA_SERIAL2_RDMAT_INT | \
342 MACEISA_SERIAL2_RDMAOR_INT)
344 static unsigned long maceisa_mask
;
346 static void enable_maceisa_irq (unsigned int irq
)
348 unsigned int crime_int
= 0;
351 DBG ("maceisa enable: %u\n", irq
);
354 case MACEISA_AUDIO_SW_IRQ
... MACEISA_AUDIO3_MERR_IRQ
:
355 crime_int
= MACE_AUDIO_INT
;
357 case MACEISA_RTC_IRQ
... MACEISA_TIMER2_IRQ
:
358 crime_int
= MACE_MISC_INT
;
360 case MACEISA_PARALLEL_IRQ
... MACEISA_SERIAL2_RDMAOR_IRQ
:
361 crime_int
= MACE_SUPERIO_INT
;
364 DBG ("crime_int %08x enabled\n", crime_int
);
365 spin_lock_irqsave(&ip32_irq_lock
, flags
);
366 crime_mask
|= crime_int
;
367 crime
->imask
= crime_mask
;
368 maceisa_mask
|= 1 << (irq
- 33);
369 mace
->perif
.ctrl
.imask
= maceisa_mask
;
370 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
373 static unsigned int startup_maceisa_irq(unsigned int irq
)
375 enable_maceisa_irq(irq
);
379 static void disable_maceisa_irq(unsigned int irq
)
381 unsigned int crime_int
= 0;
384 spin_lock_irqsave(&ip32_irq_lock
, flags
);
385 maceisa_mask
&= ~(1 << (irq
- 33));
386 if(!(maceisa_mask
& MACEISA_AUDIO_INT
))
387 crime_int
|= MACE_AUDIO_INT
;
388 if(!(maceisa_mask
& MACEISA_MISC_INT
))
389 crime_int
|= MACE_MISC_INT
;
390 if(!(maceisa_mask
& MACEISA_SUPERIO_INT
))
391 crime_int
|= MACE_SUPERIO_INT
;
392 crime_mask
&= ~crime_int
;
393 crime
->imask
= crime_mask
;
395 mace
->perif
.ctrl
.imask
= maceisa_mask
;
397 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
400 static void mask_and_ack_maceisa_irq(unsigned int irq
)
402 unsigned long mace_int
, flags
;
405 case MACEISA_PARALLEL_IRQ
:
406 case MACEISA_SERIAL1_TDMAPR_IRQ
:
407 case MACEISA_SERIAL2_TDMAPR_IRQ
:
409 spin_lock_irqsave(&ip32_irq_lock
, flags
);
410 mace_int
= mace
->perif
.ctrl
.istat
;
411 mace_int
&= ~(1 << (irq
- 33));
412 mace
->perif
.ctrl
.istat
= mace_int
;
413 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
416 disable_maceisa_irq(irq
);
419 static void end_maceisa_irq(unsigned irq
)
421 if (!(irq_desc
[irq
].status
& (IRQ_DISABLED
| IRQ_INPROGRESS
)))
422 enable_maceisa_irq(irq
);
425 #define shutdown_maceisa_irq disable_maceisa_irq
427 static struct hw_interrupt_type ip32_maceisa_interrupt
= {
430 shutdown_maceisa_irq
,
433 mask_and_ack_maceisa_irq
,
438 /* This is used for regular non-ISA, non-PCI MACE interrupts. That means
439 * bits 0-3 and 7 in the CRIME register.
442 static void enable_mace_irq(unsigned int irq
)
446 spin_lock_irqsave(&ip32_irq_lock
, flags
);
447 crime_mask
|= 1 << (irq
- 1);
448 crime
->imask
= crime_mask
;
449 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
452 static unsigned int startup_mace_irq(unsigned int irq
)
454 enable_mace_irq(irq
);
458 static void disable_mace_irq(unsigned int irq
)
462 spin_lock_irqsave(&ip32_irq_lock
, flags
);
463 crime_mask
&= ~(1 << (irq
- 1));
464 crime
->imask
= crime_mask
;
466 spin_unlock_irqrestore(&ip32_irq_lock
, flags
);
469 static void end_mace_irq(unsigned int irq
)
471 if (!(irq_desc
[irq
].status
& (IRQ_DISABLED
|IRQ_INPROGRESS
)))
472 enable_mace_irq(irq
);
475 #define shutdown_mace_irq disable_mace_irq
476 #define mask_and_ack_mace_irq disable_mace_irq
478 static struct hw_interrupt_type ip32_mace_interrupt
= {
484 mask_and_ack_mace_irq
,
489 static void ip32_unknown_interrupt(struct pt_regs
*regs
)
491 printk ("Unknown interrupt occurred!\n");
492 printk ("cp0_status: %08x\n", read_c0_status());
493 printk ("cp0_cause: %08x\n", read_c0_cause());
494 printk ("CRIME intr mask: %016lx\n", crime
->imask
);
495 printk ("CRIME intr status: %016lx\n", crime
->istat
);
496 printk ("CRIME hardware intr register: %016lx\n", crime
->hard_int
);
497 printk ("MACE ISA intr mask: %08lx\n", mace
->perif
.ctrl
.imask
);
498 printk ("MACE ISA intr status: %08lx\n", mace
->perif
.ctrl
.istat
);
499 printk ("MACE PCI control register: %08x\n", mace
->pci
.control
);
501 printk("Register dump:\n");
504 printk("Please mail this report to linux-mips@linux-mips.org\n");
505 printk("Spinning...");
509 /* CRIME 1.1 appears to deliver all interrupts to this one pin. */
510 /* change this to loop over all edge-triggered irqs, exception masked out ones */
511 void ip32_irq0(struct pt_regs
*regs
)
516 crime_int
= crime
->istat
& crime_mask
;
517 irq
= ffs(crime_int
);
518 crime_int
= 1 << (irq
- 1);
520 if (crime_int
& CRIME_MACEISA_INT_MASK
) {
521 unsigned long mace_int
= mace
->perif
.ctrl
.istat
;
522 irq
= ffs(mace_int
& maceisa_mask
) + 32;
524 DBG("*irq %u*\n", irq
);
528 void ip32_irq1(struct pt_regs
*regs
)
530 ip32_unknown_interrupt(regs
);
533 void ip32_irq2(struct pt_regs
*regs
)
535 ip32_unknown_interrupt(regs
);
538 void ip32_irq3(struct pt_regs
*regs
)
540 ip32_unknown_interrupt(regs
);
543 void ip32_irq4(struct pt_regs
*regs
)
545 ip32_unknown_interrupt(regs
);
548 void ip32_irq5(struct pt_regs
*regs
)
550 ll_timer_interrupt(IP32_R4K_TIMER_IRQ
, regs
);
553 void __init
arch_init_irq(void)
557 /* Install our interrupt handler, then clear and disable all
558 * CRIME and MACE interrupts. */
562 mace
->perif
.ctrl
.istat
= 0;
563 mace
->perif
.ctrl
.imask
= 0;
564 set_except_vector(0, ip32_handle_int
);
566 for (irq
= 0; irq
<= IP32_IRQ_MAX
; irq
++) {
567 hw_irq_controller
*controller
;
569 if (irq
== IP32_R4K_TIMER_IRQ
)
570 controller
= &ip32_cpu_interrupt
;
571 else if (irq
<= MACE_PCI_BRIDGE_IRQ
&& irq
>= MACE_VID_IN1_IRQ
)
572 controller
= &ip32_mace_interrupt
;
573 else if (irq
<= MACEPCI_SHARED2_IRQ
&& irq
>= MACEPCI_SCSI0_IRQ
)
574 controller
= &ip32_macepci_interrupt
;
575 else if (irq
<= CRIME_VICE_IRQ
&& irq
>= CRIME_GBE0_IRQ
)
576 controller
= &ip32_crime_interrupt
;
578 controller
= &ip32_maceisa_interrupt
;
580 irq_desc
[irq
].status
= IRQ_DISABLED
;
581 irq_desc
[irq
].action
= 0;
582 irq_desc
[irq
].depth
= 0;
583 irq_desc
[irq
].handler
= controller
;
585 setup_irq(CRIME_MEMERR_IRQ
, &memerr_irq
);
586 setup_irq(CRIME_CPUERR_IRQ
, &cpuerr_irq
);
588 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
589 change_c0_status(ST0_IM
, ALLINTS
);