Adds a nolock function to the w1 interface to avoid locking the
[linux-2.6/next.git] / drivers / usb / dwc3 / core.h
blob83b2960cccd74085dbcf7637a3fad0bb9d9d1236
1 /**
2 * core.h - DesignWare USB3 DRD Core Header
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
5 * All rights reserved.
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. The names of the above-listed copyright holders may not be used
20 * to endorse or promote products derived from this software without
21 * specific prior written permission.
23 * ALTERNATIVELY, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") version 2, as published by the Free
25 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
28 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
29 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
31 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
32 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
33 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
34 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
35 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
36 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 #ifndef __DRIVERS_USB_DWC3_CORE_H
41 #define __DRIVERS_USB_DWC3_CORE_H
43 #include <linux/device.h>
44 #include <linux/spinlock.h>
45 #include <linux/list.h>
46 #include <linux/dma-mapping.h>
47 #include <linux/mm.h>
48 #include <linux/debugfs.h>
50 #include <linux/usb/ch9.h>
51 #include <linux/usb/gadget.h>
53 /* Global constants */
54 #define DWC3_ENDPOINTS_NUM 32
56 #define DWC3_EVENT_BUFFERS_NUM 2
57 #define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE
58 #define DWC3_EVENT_TYPE_MASK 0xfe
60 #define DWC3_EVENT_TYPE_DEV 0
61 #define DWC3_EVENT_TYPE_CARKIT 3
62 #define DWC3_EVENT_TYPE_I2C 4
64 #define DWC3_DEVICE_EVENT_DISCONNECT 0
65 #define DWC3_DEVICE_EVENT_RESET 1
66 #define DWC3_DEVICE_EVENT_CONNECT_DONE 2
67 #define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
68 #define DWC3_DEVICE_EVENT_WAKEUP 4
69 #define DWC3_DEVICE_EVENT_EOPF 6
70 #define DWC3_DEVICE_EVENT_SOF 7
71 #define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
72 #define DWC3_DEVICE_EVENT_CMD_CMPL 10
73 #define DWC3_DEVICE_EVENT_OVERFLOW 11
75 #define DWC3_GEVNTCOUNT_MASK 0xfffc
76 #define DWC3_GSNPSID_MASK 0xffff0000
77 #define DWC3_GSNPSREV_MASK 0xffff
79 /* Global Registers */
80 #define DWC3_GSBUSCFG0 0xc100
81 #define DWC3_GSBUSCFG1 0xc104
82 #define DWC3_GTXTHRCFG 0xc108
83 #define DWC3_GRXTHRCFG 0xc10c
84 #define DWC3_GCTL 0xc110
85 #define DWC3_GEVTEN 0xc114
86 #define DWC3_GSTS 0xc118
87 #define DWC3_GSNPSID 0xc120
88 #define DWC3_GGPIO 0xc124
89 #define DWC3_GUID 0xc128
90 #define DWC3_GUCTL 0xc12c
91 #define DWC3_GBUSERRADDR0 0xc130
92 #define DWC3_GBUSERRADDR1 0xc134
93 #define DWC3_GPRTBIMAP0 0xc138
94 #define DWC3_GPRTBIMAP1 0xc13c
95 #define DWC3_GHWPARAMS0 0xc140
96 #define DWC3_GHWPARAMS1 0xc144
97 #define DWC3_GHWPARAMS2 0xc148
98 #define DWC3_GHWPARAMS3 0xc14c
99 #define DWC3_GHWPARAMS4 0xc150
100 #define DWC3_GHWPARAMS5 0xc154
101 #define DWC3_GHWPARAMS6 0xc158
102 #define DWC3_GHWPARAMS7 0xc15c
103 #define DWC3_GDBGFIFOSPACE 0xc160
104 #define DWC3_GDBGLTSSM 0xc164
105 #define DWC3_GPRTBIMAP_HS0 0xc180
106 #define DWC3_GPRTBIMAP_HS1 0xc184
107 #define DWC3_GPRTBIMAP_FS0 0xc188
108 #define DWC3_GPRTBIMAP_FS1 0xc18c
110 #define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04))
111 #define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04))
113 #define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04))
115 #define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04))
117 #define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04))
118 #define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04))
120 #define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10))
121 #define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10))
122 #define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10))
123 #define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10))
125 #define DWC3_GHWPARAMS8 0xc600
127 /* Device Registers */
128 #define DWC3_DCFG 0xc700
129 #define DWC3_DCTL 0xc704
130 #define DWC3_DEVTEN 0xc708
131 #define DWC3_DSTS 0xc70c
132 #define DWC3_DGCMDPAR 0xc710
133 #define DWC3_DGCMD 0xc714
134 #define DWC3_DALEPENA 0xc720
135 #define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10))
136 #define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10))
137 #define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10))
138 #define DWC3_DEPCMD(n) (0xc80c + (n * 0x10))
140 /* OTG Registers */
141 #define DWC3_OCFG 0xcc00
142 #define DWC3_OCTL 0xcc04
143 #define DWC3_OEVTEN 0xcc08
144 #define DWC3_OSTS 0xcc0C
146 /* Bit fields */
148 /* Global Configuration Register */
149 #define DWC3_GCTL_PWRDNSCALE(n) (n << 19)
150 #define DWC3_GCTL_U2RSTECN 16
151 #define DWC3_GCTL_RAMCLKSEL(x) ((x & DWC3_GCTL_CLK_MASK) << 6)
152 #define DWC3_GCTL_CLK_BUS (0)
153 #define DWC3_GCTL_CLK_PIPE (1)
154 #define DWC3_GCTL_CLK_PIPEHALF (2)
155 #define DWC3_GCTL_CLK_MASK (3)
157 #define DWC3_GCTL_PRTCAPDIR(n) (n << 12)
158 #define DWC3_GCTL_PRTCAP_HOST 1
159 #define DWC3_GCTL_PRTCAP_DEVICE 2
160 #define DWC3_GCTL_PRTCAP_OTG 3
162 #define DWC3_GCTL_CORESOFTRESET (1 << 11)
163 #define DWC3_GCTL_DISSCRAMBLE (1 << 3)
165 /* Global USB2 PHY Configuration Register */
166 #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
167 #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
169 /* Global USB3 PIPE Control Register */
170 #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
171 #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
173 /* Device Configuration Register */
174 #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
175 #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
177 #define DWC3_DCFG_SPEED_MASK (7 << 0)
178 #define DWC3_DCFG_SUPERSPEED (4 << 0)
179 #define DWC3_DCFG_HIGHSPEED (0 << 0)
180 #define DWC3_DCFG_FULLSPEED2 (1 << 0)
181 #define DWC3_DCFG_LOWSPEED (2 << 0)
182 #define DWC3_DCFG_FULLSPEED1 (3 << 0)
184 /* Device Control Register */
185 #define DWC3_DCTL_RUN_STOP (1 << 31)
186 #define DWC3_DCTL_CSFTRST (1 << 30)
187 #define DWC3_DCTL_LSFTRST (1 << 29)
189 #define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
190 #define DWC3_DCTL_HIRD_THRES(n) (((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24)
192 #define DWC3_DCTL_APPL1RES (1 << 23)
194 #define DWC3_DCTL_INITU2ENA (1 << 12)
195 #define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
196 #define DWC3_DCTL_INITU1ENA (1 << 10)
197 #define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
198 #define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
200 #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
201 #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
203 #define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0))
204 #define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4))
205 #define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5))
206 #define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6))
207 #define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8))
208 #define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10))
209 #define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11))
211 /* Device Event Enable Register */
212 #define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12)
213 #define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11)
214 #define DWC3_DEVTEN_CMDCMPLTEN (1 << 10)
215 #define DWC3_DEVTEN_ERRTICERREN (1 << 9)
216 #define DWC3_DEVTEN_SOFEN (1 << 7)
217 #define DWC3_DEVTEN_EOPFEN (1 << 6)
218 #define DWC3_DEVTEN_WKUPEVTEN (1 << 4)
219 #define DWC3_DEVTEN_ULSTCNGEN (1 << 3)
220 #define DWC3_DEVTEN_CONNECTDONEEN (1 << 2)
221 #define DWC3_DEVTEN_USBRSTEN (1 << 1)
222 #define DWC3_DEVTEN_DISCONNEVTEN (1 << 0)
224 /* Device Status Register */
225 #define DWC3_DSTS_PWRUPREQ (1 << 24)
226 #define DWC3_DSTS_COREIDLE (1 << 23)
227 #define DWC3_DSTS_DEVCTRLHLT (1 << 22)
229 #define DWC3_DSTS_USBLNKST_MASK (0x0f << 18)
230 #define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
232 #define DWC3_DSTS_RXFIFOEMPTY (1 << 17)
234 #define DWC3_DSTS_SOFFN_MASK (0x3ff << 3)
235 #define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
237 #define DWC3_DSTS_CONNECTSPD (7 << 0)
239 #define DWC3_DSTS_SUPERSPEED (4 << 0)
240 #define DWC3_DSTS_HIGHSPEED (0 << 0)
241 #define DWC3_DSTS_FULLSPEED2 (1 << 0)
242 #define DWC3_DSTS_LOWSPEED (2 << 0)
243 #define DWC3_DSTS_FULLSPEED1 (3 << 0)
245 /* Device Generic Command Register */
246 #define DWC3_DGCMD_SET_LMP 0x01
247 #define DWC3_DGCMD_SET_PERIODIC_PAR 0x02
248 #define DWC3_DGCMD_XMIT_FUNCTION 0x03
249 #define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09
250 #define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a
251 #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
252 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
254 /* Device Endpoint Command Register */
255 #define DWC3_DEPCMD_PARAM_SHIFT 16
256 #define DWC3_DEPCMD_PARAM(x) (x << DWC3_DEPCMD_PARAM_SHIFT)
257 #define DWC3_DEPCMD_GET_RSC_IDX(x) ((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
258 #define DWC3_DEPCMD_STATUS_MASK (0x0f << 12)
259 #define DWC3_DEPCMD_STATUS(x) ((x & DWC3_DEPCMD_STATUS_MASK) >> 12)
260 #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
261 #define DWC3_DEPCMD_CMDACT (1 << 10)
262 #define DWC3_DEPCMD_CMDIOC (1 << 8)
264 #define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0)
265 #define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0)
266 #define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0)
267 #define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0)
268 #define DWC3_DEPCMD_CLEARSTALL (0x05 << 0)
269 #define DWC3_DEPCMD_SETSTALL (0x04 << 0)
270 #define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0)
271 #define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0)
272 #define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0)
274 /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
275 #define DWC3_DALEPENA_EP(n) (1 << n)
277 #define DWC3_DEPCMD_TYPE_CONTROL 0
278 #define DWC3_DEPCMD_TYPE_ISOC 1
279 #define DWC3_DEPCMD_TYPE_BULK 2
280 #define DWC3_DEPCMD_TYPE_INTR 3
282 /* Structures */
284 struct dwc3_trb_hw;
287 * struct dwc3_event_buffer - Software event buffer representation
288 * @list: a list of event buffers
289 * @buf: _THE_ buffer
290 * @length: size of this buffer
291 * @dma: dma_addr_t
292 * @dwc: pointer to DWC controller
294 struct dwc3_event_buffer {
295 void *buf;
296 unsigned length;
297 unsigned int lpos;
299 dma_addr_t dma;
301 struct dwc3 *dwc;
304 #define DWC3_EP_FLAG_STALLED (1 << 0)
305 #define DWC3_EP_FLAG_WEDGED (1 << 1)
307 #define DWC3_EP_DIRECTION_TX true
308 #define DWC3_EP_DIRECTION_RX false
310 #define DWC3_TRB_NUM 32
311 #define DWC3_TRB_MASK (DWC3_TRB_NUM - 1)
314 * struct dwc3_ep - device side endpoint representation
315 * @endpoint: usb endpoint
316 * @request_list: list of requests for this endpoint
317 * @req_queued: list of requests on this ep which have TRBs setup
318 * @trb_pool: array of transaction buffers
319 * @trb_pool_dma: dma address of @trb_pool
320 * @free_slot: next slot which is going to be used
321 * @busy_slot: first slot which is owned by HW
322 * @desc: usb_endpoint_descriptor pointer
323 * @dwc: pointer to DWC controller
324 * @flags: endpoint flags (wedged, stalled, ...)
325 * @current_trb: index of current used trb
326 * @number: endpoint number (1 - 15)
327 * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
328 * @res_trans_idx: Resource transfer index
329 * @interval: the intervall on which the ISOC transfer is started
330 * @name: a human readable name e.g. ep1out-bulk
331 * @direction: true for TX, false for RX
333 struct dwc3_ep {
334 struct usb_ep endpoint;
335 struct list_head request_list;
336 struct list_head req_queued;
338 struct dwc3_trb_hw *trb_pool;
339 dma_addr_t trb_pool_dma;
340 u32 free_slot;
341 u32 busy_slot;
342 const struct usb_endpoint_descriptor *desc;
343 struct dwc3 *dwc;
345 unsigned flags;
346 #define DWC3_EP_ENABLED (1 << 0)
347 #define DWC3_EP_STALL (1 << 1)
348 #define DWC3_EP_WEDGE (1 << 2)
349 #define DWC3_EP_BUSY (1 << 4)
350 #define DWC3_EP_PENDING_REQUEST (1 << 5)
351 #define DWC3_EP_WILL_SHUTDOWN (1 << 6)
353 unsigned current_trb;
355 u8 number;
356 u8 type;
357 u8 res_trans_idx;
358 u32 interval;
360 char name[20];
362 unsigned direction:1;
365 enum dwc3_phy {
366 DWC3_PHY_UNKNOWN = 0,
367 DWC3_PHY_USB3,
368 DWC3_PHY_USB2,
371 enum dwc3_ep0_state {
372 EP0_UNCONNECTED = 0,
373 EP0_IDLE,
374 EP0_IN_DATA_PHASE,
375 EP0_OUT_DATA_PHASE,
376 EP0_IN_WAIT_GADGET,
377 EP0_OUT_WAIT_GADGET,
378 EP0_IN_WAIT_NRDY,
379 EP0_OUT_WAIT_NRDY,
380 EP0_IN_STATUS_PHASE,
381 EP0_OUT_STATUS_PHASE,
382 EP0_STALL,
385 enum dwc3_link_state {
386 /* In SuperSpeed */
387 DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */
388 DWC3_LINK_STATE_U1 = 0x01,
389 DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */
390 DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */
391 DWC3_LINK_STATE_SS_DIS = 0x04,
392 DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */
393 DWC3_LINK_STATE_SS_INACT = 0x06,
394 DWC3_LINK_STATE_POLL = 0x07,
395 DWC3_LINK_STATE_RECOV = 0x08,
396 DWC3_LINK_STATE_HRESET = 0x09,
397 DWC3_LINK_STATE_CMPLY = 0x0a,
398 DWC3_LINK_STATE_LPBK = 0x0b,
399 DWC3_LINK_STATE_MASK = 0x0f,
402 enum dwc3_device_state {
403 DWC3_DEFAULT_STATE,
404 DWC3_ADDRESS_STATE,
405 DWC3_CONFIGURED_STATE,
409 * struct dwc3_trb - transfer request block
410 * @bpl: lower 32bit of the buffer
411 * @bph: higher 32bit of the buffer
412 * @length: buffer size (up to 16mb - 1)
413 * @pcm1: packet count m1
414 * @trbsts: trb status
415 * 0 = ok
416 * 1 = missed isoc
417 * 2 = setup pending
418 * @hwo: hardware owner of descriptor
419 * @lst: last trb
420 * @chn: chain buffers
421 * @csp: continue on short packets (only supported on isoc eps)
422 * @trbctl: trb control
423 * 1 = normal
424 * 2 = control-setup
425 * 3 = control-status-2
426 * 4 = control-status-3
427 * 5 = control-data (first trb of data stage)
428 * 6 = isochronous-first (first trb of service interval)
429 * 7 = isochronous
430 * 8 = link trb
431 * others = reserved
432 * @isp_imi: interrupt on short packet / interrupt on missed isoc
433 * @ioc: interrupt on complete
434 * @sid_sofn: Stream ID / SOF Number
436 struct dwc3_trb {
437 u64 bplh;
439 union {
440 struct {
441 u32 length:24;
442 u32 pcm1:2;
443 u32 reserved27_26:2;
444 u32 trbsts:4;
445 #define DWC3_TRB_STS_OKAY 0
446 #define DWC3_TRB_STS_MISSED_ISOC 1
447 #define DWC3_TRB_STS_SETUP_PENDING 2
449 u32 len_pcm;
452 union {
453 struct {
454 u32 hwo:1;
455 u32 lst:1;
456 u32 chn:1;
457 u32 csp:1;
458 u32 trbctl:6;
459 u32 isp_imi:1;
460 u32 ioc:1;
461 u32 reserved13_12:2;
462 u32 sid_sofn:16;
463 u32 reserved31_30:2;
465 u32 control;
467 } __packed;
470 * struct dwc3_trb_hw - transfer request block (hw format)
471 * @bpl: DW0-3
472 * @bph: DW4-7
473 * @size: DW8-B
474 * @trl: DWC-F
476 struct dwc3_trb_hw {
477 __le32 bpl;
478 __le32 bph;
479 __le32 size;
480 __le32 ctrl;
481 } __packed;
483 static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw)
485 hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh));
486 hw->bph = cpu_to_le32(upper_32_bits(nat->bplh));
487 hw->size = cpu_to_le32p(&nat->len_pcm);
488 /* HWO is written last */
489 hw->ctrl = cpu_to_le32p(&nat->control);
492 static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
494 u64 bplh;
496 bplh = le32_to_cpup(&hw->bpl);
497 bplh |= (u64) le32_to_cpup(&hw->bph) << 32;
498 nat->bplh = bplh;
500 nat->len_pcm = le32_to_cpup(&hw->size);
501 nat->control = le32_to_cpup(&hw->ctrl);
505 * struct dwc3 - representation of our controller
506 * ctrl_req: usb control request which is used for ep0
507 * ep0_trb: trb which is used for the ctrl_req
508 * setup_buf: used while precessing STD USB requests
509 * ctrl_req_addr: dma address of ctrl_req
510 * ep0_trb: dma address of ep0_trb
511 * ep0_usb_req: dummy req used while handling STD USB requests
512 * setup_buf_addr: dma address of setup_buf
513 * @lock: for synchronizing
514 * @dev: pointer to our struct device
515 * @event_buffer_list: a list of event buffers
516 * @gadget: device side representation of the peripheral controller
517 * @gadget_driver: pointer to the gadget driver
518 * @regs: base address for our registers
519 * @regs_size: address space size
520 * @irq: IRQ number
521 * @revision: revision register contents
522 * @is_selfpowered: true when we are selfpowered
523 * @three_stage_setup: set if we perform a three phase setup
524 * @ep0_status_pending: ep0 status response without a req is pending
525 * @ep0state: state of endpoint zero
526 * @link_state: link state
527 * @speed: device speed (super, high, full, low)
528 * @mem: points to start of memory which is used for this struct.
529 * @root: debugfs root folder pointer
531 struct dwc3 {
532 struct usb_ctrlrequest *ctrl_req;
533 struct dwc3_trb_hw *ep0_trb;
534 u8 *setup_buf;
535 dma_addr_t ctrl_req_addr;
536 dma_addr_t ep0_trb_addr;
537 dma_addr_t setup_buf_addr;
538 struct usb_request ep0_usb_req;
539 /* device lock */
540 spinlock_t lock;
541 struct device *dev;
543 struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM];
544 struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
546 struct usb_gadget gadget;
547 struct usb_gadget_driver *gadget_driver;
549 void __iomem *regs;
550 size_t regs_size;
552 int irq;
554 u32 revision;
556 #define DWC3_REVISION_173A 0x5533173a
557 #define DWC3_REVISION_175A 0x5533175a
558 #define DWC3_REVISION_180A 0x5533180a
559 #define DWC3_REVISION_183A 0x5533183a
560 #define DWC3_REVISION_185A 0x5533185a
561 #define DWC3_REVISION_188A 0x5533188a
562 #define DWC3_REVISION_190A 0x5533190a
564 unsigned is_selfpowered:1;
565 unsigned three_stage_setup:1;
566 unsigned ep0_status_pending:1;
568 enum dwc3_ep0_state ep0state;
569 enum dwc3_link_state link_state;
570 enum dwc3_device_state dev_state;
572 u8 speed;
573 void *mem;
575 struct dentry *root;
578 /* -------------------------------------------------------------------------- */
580 #define DWC3_TRBSTS_OK 0
581 #define DWC3_TRBSTS_MISSED_ISOC 1
582 #define DWC3_TRBSTS_SETUP_PENDING 2
584 #define DWC3_TRBCTL_NORMAL 1
585 #define DWC3_TRBCTL_CONTROL_SETUP 2
586 #define DWC3_TRBCTL_CONTROL_STATUS2 3
587 #define DWC3_TRBCTL_CONTROL_STATUS3 4
588 #define DWC3_TRBCTL_CONTROL_DATA 5
589 #define DWC3_TRBCTL_ISOCHRONOUS_FIRST 6
590 #define DWC3_TRBCTL_ISOCHRONOUS 7
591 #define DWC3_TRBCTL_LINK_TRB 8
593 /* -------------------------------------------------------------------------- */
595 struct dwc3_event_type {
596 u32 is_devspec:1;
597 u32 type:6;
598 u32 reserved8_31:25;
599 } __packed;
601 #define DWC3_DEPEVT_XFERCOMPLETE 0x01
602 #define DWC3_DEPEVT_XFERINPROGRESS 0x02
603 #define DWC3_DEPEVT_XFERNOTREADY 0x03
604 #define DWC3_DEPEVT_RXTXFIFOEVT 0x04
605 #define DWC3_DEPEVT_STREAMEVT 0x06
606 #define DWC3_DEPEVT_EPCMDCMPLT 0x07
609 * struct dwc3_event_depvt - Device Endpoint Events
610 * @one_bit: indicates this is an endpoint event (not used)
611 * @endpoint_number: number of the endpoint
612 * @endpoint_event: The event we have:
613 * 0x00 - Reserved
614 * 0x01 - XferComplete
615 * 0x02 - XferInProgress
616 * 0x03 - XferNotReady
617 * 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun)
618 * 0x05 - Reserved
619 * 0x06 - StreamEvt
620 * 0x07 - EPCmdCmplt
621 * @reserved11_10: Reserved, don't use.
622 * @status: Indicates the status of the event. Refer to databook for
623 * more information.
624 * @parameters: Parameters of the current event. Refer to databook for
625 * more information.
627 struct dwc3_event_depevt {
628 u32 one_bit:1;
629 u32 endpoint_number:5;
630 u32 endpoint_event:4;
631 u32 reserved11_10:2;
632 u32 status:4;
633 #define DEPEVT_STATUS_BUSERR (1 << 0)
634 #define DEPEVT_STATUS_SHORT (1 << 1)
635 #define DEPEVT_STATUS_IOC (1 << 2)
636 #define DEPEVT_STATUS_LST (1 << 3)
637 u32 parameters:16;
638 } __packed;
641 * struct dwc3_event_devt - Device Events
642 * @one_bit: indicates this is a non-endpoint event (not used)
643 * @device_event: indicates it's a device event. Should read as 0x00
644 * @type: indicates the type of device event.
645 * 0 - DisconnEvt
646 * 1 - USBRst
647 * 2 - ConnectDone
648 * 3 - ULStChng
649 * 4 - WkUpEvt
650 * 5 - Reserved
651 * 6 - EOPF
652 * 7 - SOF
653 * 8 - Reserved
654 * 9 - ErrticErr
655 * 10 - CmdCmplt
656 * 11 - EvntOverflow
657 * 12 - VndrDevTstRcved
658 * @reserved15_12: Reserved, not used
659 * @event_info: Information about this event
660 * @reserved31_24: Reserved, not used
662 struct dwc3_event_devt {
663 u32 one_bit:1;
664 u32 device_event:7;
665 u32 type:4;
666 u32 reserved15_12:4;
667 u32 event_info:8;
668 u32 reserved31_24:8;
669 } __packed;
672 * struct dwc3_event_gevt - Other Core Events
673 * @one_bit: indicates this is a non-endpoint event (not used)
674 * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
675 * @phy_port_number: self-explanatory
676 * @reserved31_12: Reserved, not used.
678 struct dwc3_event_gevt {
679 u32 one_bit:1;
680 u32 device_event:7;
681 u32 phy_port_number:4;
682 u32 reserved31_12:20;
683 } __packed;
686 * union dwc3_event - representation of Event Buffer contents
687 * @raw: raw 32-bit event
688 * @type: the type of the event
689 * @depevt: Device Endpoint Event
690 * @devt: Device Event
691 * @gevt: Global Event
693 union dwc3_event {
694 u32 raw;
695 struct dwc3_event_type type;
696 struct dwc3_event_depevt depevt;
697 struct dwc3_event_devt devt;
698 struct dwc3_event_gevt gevt;
702 * DWC3 Features to be used as Driver Data
705 #define DWC3_HAS_PERIPHERAL BIT(0)
706 #define DWC3_HAS_XHCI BIT(1)
707 #define DWC3_HAS_OTG BIT(3)
709 #endif /* __DRIVERS_USB_DWC3_CORE_H */