drivers/usb/misc/usbtest.c

   1 #include <linux/kernel.h>
   2 #include <linux/errno.h>
   3 #include <linux/init.h>
   4 #include <linux/slab.h>
   5 #include <linux/mm.h>
   6 #include <linux/module.h>
   7 #include <linux/moduleparam.h>
   8 #include <linux/scatterlist.h>
   9 #include <linux/mutex.h>
  10
  11 #include <linux/usb.h>
  12
  13
  14 /*-------------------------------------------------------------------------*/
  15
  16 /* FIXME make these public somewhere; usbdevfs.h? */
  17 struct usbtest_param {
  18         /* inputs */
  19         unsigned                test_num;       /* 0..(TEST_CASES-1) */
  20         unsigned                iterations;
  21         unsigned                length;
  22         unsigned                vary;
  23         unsigned                sglen;
  24
  25         /* outputs */
  26         struct timeval          duration;
  27 };
  28 #define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param)
  29
  30 /*-------------------------------------------------------------------------*/
  31
  32 #define GENERIC         /* let probe() bind using module params */
  33
  34 /* Some devices that can be used for testing will have "real" drivers.
  35  * Entries for those need to be enabled here by hand, after disabling
  36  * that "real" driver.
  37  */
  38 //#define       IBOT2           /* grab iBOT2 webcams */
  39 //#define       KEYSPAN_19Qi    /* grab un-renumerated serial adapter */
  40
  41 /*-------------------------------------------------------------------------*/
  42
  43 struct usbtest_info {
  44         const char              *name;
  45         u8                      ep_in;          /* bulk/intr source */
  46         u8                      ep_out;         /* bulk/intr sink */
  47         unsigned                autoconf:1;
  48         unsigned                ctrl_out:1;
  49         unsigned                iso:1;          /* try iso in/out */
  50         int                     alt;
  51 };
  52
  53 /* this is accessed only through usbfs ioctl calls.
  54  * one ioctl to issue a test ... one lock per device.
  55  * tests create other threads if they need them.
  56  * urbs and buffers are allocated dynamically,
  57  * and data generated deterministically.
  58  */
  59 struct usbtest_dev {
  60         struct usb_interface    *intf;
  61         struct usbtest_info     *info;
  62         int                     in_pipe;
  63         int                     out_pipe;
  64         int                     in_iso_pipe;
  65         int                     out_iso_pipe;
  66         struct usb_endpoint_descriptor  *iso_in, *iso_out;
  67         struct mutex            lock;
  68
  69 #define TBUF_SIZE       256
  70         u8                      *buf;
  71 };
  72
  73 static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test)
  74 {
  75         return interface_to_usbdev(test->intf);
  76 }
  77
  78 /* set up all urbs so they can be used with either bulk or interrupt */
  79 #define INTERRUPT_RATE          1       /* msec/transfer */
  80
  81 #define ERROR(tdev, fmt, args...) \
  82         dev_err(&(tdev)->intf->dev , fmt , ## args)
  83 #define WARNING(tdev, fmt, args...) \
  84         dev_warn(&(tdev)->intf->dev , fmt , ## args)
  85
  86 #define GUARD_BYTE      0xA5
  87
  88 /*-------------------------------------------------------------------------*/
  89
  90 static int
  91 get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
  92 {
  93         int                             tmp;
  94         struct usb_host_interface       *alt;
  95         struct usb_host_endpoint        *in, *out;
  96         struct usb_host_endpoint        *iso_in, *iso_out;
  97         struct usb_device               *udev;
  98
  99         for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
 100                 unsigned        ep;
 101
 102                 in = out = NULL;
 103                 iso_in = iso_out = NULL;
 104                 alt = intf->altsetting + tmp;
 105
 106                 /* take the first altsetting with in-bulk + out-bulk;
 107                  * ignore other endpoints and altsettings.
 108                  */
 109                 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 110                         struct usb_host_endpoint        *e;
 111
 112                         e = alt->endpoint + ep;
 113                         switch (e->desc.bmAttributes) {
 114                         case USB_ENDPOINT_XFER_BULK:
 115                                 break;
 116                         case USB_ENDPOINT_XFER_ISOC:
 117                                 if (dev->info->iso)
 118                                         goto try_iso;
 119                                 /* FALLTHROUGH */
 120                         default:
 121                                 continue;
 122                         }
 123                         if (usb_endpoint_dir_in(&e->desc)) {
 124                                 if (!in)
 125                                         in = e;
 126                         } else {
 127                                 if (!out)
 128                                         out = e;
 129                         }
 130                         continue;
 131 try_iso:
 132                         if (usb_endpoint_dir_in(&e->desc)) {
 133                                 if (!iso_in)
 134                                         iso_in = e;
 135                         } else {
 136                                 if (!iso_out)
 137                                         iso_out = e;
 138                         }
 139                 }
 140                 if ((in && out)  ||  iso_in || iso_out)
 141                         goto found;
 142         }
 143         return -EINVAL;
 144
 145 found:
 146         udev = testdev_to_usbdev(dev);
 147         if (alt->desc.bAlternateSetting != 0) {
 148                 tmp = usb_set_interface(udev,
 149                                 alt->desc.bInterfaceNumber,
 150                                 alt->desc.bAlternateSetting);
 151                 if (tmp < 0)
 152                         return tmp;
 153         }
 154
 155         if (in) {
 156                 dev->in_pipe = usb_rcvbulkpipe(udev,
 157                         in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 158                 dev->out_pipe = usb_sndbulkpipe(udev,
 159                         out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 160         }
 161         if (iso_in) {
 162                 dev->iso_in = &iso_in->desc;
 163                 dev->in_iso_pipe = usb_rcvisocpipe(udev,
 164                                 iso_in->desc.bEndpointAddress
 165                                         & USB_ENDPOINT_NUMBER_MASK);
 166         }
 167
 168         if (iso_out) {
 169                 dev->iso_out = &iso_out->desc;
 170                 dev->out_iso_pipe = usb_sndisocpipe(udev,
 171                                 iso_out->desc.bEndpointAddress
 172                                         & USB_ENDPOINT_NUMBER_MASK);
 173         }
 174         return 0;
 175 }
 176
 177 /*-------------------------------------------------------------------------*/
 178
 179 /* Support for testing basic non-queued I/O streams.
 180  *
 181  * These just package urbs as requests that can be easily canceled.
 182  * Each urb's data buffer is dynamically allocated; callers can fill
 183  * them with non-zero test data (or test for it) when appropriate.
 184  */
 185
 186 static void simple_callback(struct urb *urb)
 187 {
 188         complete(urb->context);
 189 }
 190
 191 static struct urb *usbtest_alloc_urb(
 192         struct usb_device       *udev,
 193         int                     pipe,
 194         unsigned long           bytes,
 195         unsigned                transfer_flags,
 196         unsigned                offset)
 197 {
 198         struct urb              *urb;
 199
 200         urb = usb_alloc_urb(0, GFP_KERNEL);
 201         if (!urb)
 202                 return urb;
 203         usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback, NULL);
 204         urb->interval = (udev->speed == USB_SPEED_HIGH)
 205                         ? (INTERRUPT_RATE << 3)
 206                         : INTERRUPT_RATE;
 207         urb->transfer_flags = transfer_flags;
 208         if (usb_pipein(pipe))
 209                 urb->transfer_flags |= URB_SHORT_NOT_OK;
 210
 211         if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
 212                 urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
 213                         GFP_KERNEL, &urb->transfer_dma);
 214         else
 215                 urb->transfer_buffer = kmalloc(bytes + offset, GFP_KERNEL);
 216
 217         if (!urb->transfer_buffer) {
 218                 usb_free_urb(urb);
 219                 return NULL;
 220         }
 221
 222         /* To test unaligned transfers add an offset and fill the
 223                 unused memory with a guard value */
 224         if (offset) {
 225                 memset(urb->transfer_buffer, GUARD_BYTE, offset);
 226                 urb->transfer_buffer += offset;
 227                 if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
 228                         urb->transfer_dma += offset;
 229         }
 230
 231         /* For inbound transfers use guard byte so that test fails if
 232                 data not correctly copied */
 233         memset(urb->transfer_buffer,
 234                         usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
 235                         bytes);
 236         return urb;
 237 }
 238
 239 static struct urb *simple_alloc_urb(
 240         struct usb_device       *udev,
 241         int                     pipe,
 242         unsigned long           bytes)
 243 {
 244         return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0);
 245 }
 246
 247 static unsigned pattern;
 248 static unsigned mod_pattern;
 249 module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR);
 250 MODULE_PARM_DESC(mod_pattern, "i/o pattern (0 == zeroes)");
 251
 252 static inline void simple_fill_buf(struct urb *urb)
 253 {
 254         unsigned        i;
 255         u8              *buf = urb->transfer_buffer;
 256         unsigned        len = urb->transfer_buffer_length;
 257
 258         switch (pattern) {
 259         default:
 260                 /* FALLTHROUGH */
 261         case 0:
 262                 memset(buf, 0, len);
 263                 break;
 264         case 1:                 /* mod63 */
 265                 for (i = 0; i < len; i++)
 266                         *buf++ = (u8) (i % 63);
 267                 break;
 268         }
 269 }
 270
 271 static inline unsigned long buffer_offset(void *buf)
 272 {
 273         return (unsigned long)buf & (ARCH_KMALLOC_MINALIGN - 1);
 274 }
 275
 276 static int check_guard_bytes(struct usbtest_dev *tdev, struct urb *urb)
 277 {
 278         u8 *buf = urb->transfer_buffer;
 279         u8 *guard = buf - buffer_offset(buf);
 280         unsigned i;
 281
 282         for (i = 0; guard < buf; i++, guard++) {
 283                 if (*guard != GUARD_BYTE) {
 284                         ERROR(tdev, "guard byte[%d] %d (not %d)\n",
 285                                 i, *guard, GUARD_BYTE);
 286                         return -EINVAL;
 287                 }
 288         }
 289         return 0;
 290 }
 291
 292 static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
 293 {
 294         unsigned        i;
 295         u8              expected;
 296         u8              *buf = urb->transfer_buffer;
 297         unsigned        len = urb->actual_length;
 298
 299         int ret = check_guard_bytes(tdev, urb);
 300         if (ret)
 301                 return ret;
 302
 303         for (i = 0; i < len; i++, buf++) {
 304                 switch (pattern) {
 305                 /* all-zeroes has no synchronization issues */
 306                 case 0:
 307                         expected = 0;
 308                         break;
 309                 /* mod63 stays in sync with short-terminated transfers,
 310                  * or otherwise when host and gadget agree on how large
 311                  * each usb transfer request should be.  resync is done
 312                  * with set_interface or set_config.
 313                  */
 314                 case 1:                 /* mod63 */
 315                         expected = i % 63;
 316                         break;
 317                 /* always fail unsupported patterns */
 318                 default:
 319                         expected = !*buf;
 320                         break;
 321                 }
 322                 if (*buf == expected)
 323                         continue;
 324                 ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected);
 325                 return -EINVAL;
 326         }
 327         return 0;
 328 }
 329
 330 static void simple_free_urb(struct urb *urb)
 331 {
 332         unsigned long offset = buffer_offset(urb->transfer_buffer);
 333
 334         if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
 335                 usb_free_coherent(
 336                         urb->dev,
 337                         urb->transfer_buffer_length + offset,
 338                         urb->transfer_buffer - offset,
 339                         urb->transfer_dma - offset);
 340         else
 341                 kfree(urb->transfer_buffer - offset);
 342         usb_free_urb(urb);
 343 }
 344
 345 static int simple_io(
 346         struct usbtest_dev      *tdev,
 347         struct urb              *urb,
 348         int                     iterations,
 349         int                     vary,
 350         int                     expected,
 351         const char              *label
 352 )
 353 {
 354         struct usb_device       *udev = urb->dev;
 355         int                     max = urb->transfer_buffer_length;
 356         struct completion       completion;
 357         int                     retval = 0;
 358
 359         urb->context = &completion;
 360         while (retval == 0 && iterations-- > 0) {
 361                 init_completion(&completion);
 362                 if (usb_pipeout(urb->pipe)) {
 363                         simple_fill_buf(urb);
 364                         urb->transfer_flags |= URB_ZERO_PACKET;
 365                 }
 366                 retval = usb_submit_urb(urb, GFP_KERNEL);
 367                 if (retval != 0)
 368                         break;
 369
 370                 /* NOTE:  no timeouts; can't be broken out of by interrupt */
 371                 wait_for_completion(&completion);
 372                 retval = urb->status;
 373                 urb->dev = udev;
 374                 if (retval == 0 && usb_pipein(urb->pipe))
 375                         retval = simple_check_buf(tdev, urb);
 376
 377                 if (vary) {
 378                         int     len = urb->transfer_buffer_length;
 379
 380                         len += vary;
 381                         len %= max;
 382                         if (len == 0)
 383                                 len = (vary < max) ? vary : max;
 384                         urb->transfer_buffer_length = len;
 385                 }
 386
 387                 /* FIXME if endpoint halted, clear halt (and log) */
 388         }
 389         urb->transfer_buffer_length = max;
 390
 391         if (expected != retval)
 392                 dev_err(&udev->dev,
 393                         "%s failed, iterations left %d, status %d (not %d)\n",
 394                                 label, iterations, retval, expected);
 395         return retval;
 396 }
 397
 398
 399 /*-------------------------------------------------------------------------*/
 400
 401 /* We use scatterlist primitives to test queued I/O.
 402  * Yes, this also tests the scatterlist primitives.
 403  */
 404
 405 static void free_sglist(struct scatterlist *sg, int nents)
 406 {
 407         unsigned                i;
 408
 409         if (!sg)
 410                 return;
 411         for (i = 0; i < nents; i++) {
 412                 if (!sg_page(&sg[i]))
 413                         continue;
 414                 kfree(sg_virt(&sg[i]));
 415         }
 416         kfree(sg);
 417 }
 418
 419 static struct scatterlist *
 420 alloc_sglist(int nents, int max, int vary)
 421 {
 422         struct scatterlist      *sg;
 423         unsigned                i;
 424         unsigned                size = max;
 425
 426         sg = kmalloc(nents * sizeof *sg, GFP_KERNEL);
 427         if (!sg)
 428                 return NULL;
 429         sg_init_table(sg, nents);
 430
 431         for (i = 0; i < nents; i++) {
 432                 char            *buf;
 433                 unsigned        j;
 434
 435                 buf = kzalloc(size, GFP_KERNEL);
 436                 if (!buf) {
 437                         free_sglist(sg, i);
 438                         return NULL;
 439                 }
 440
 441                 /* kmalloc pages are always physically contiguous! */
 442                 sg_set_buf(&sg[i], buf, size);
 443
 444                 switch (pattern) {
 445                 case 0:
 446                         /* already zeroed */
 447                         break;
 448                 case 1:
 449                         for (j = 0; j < size; j++)
 450                                 *buf++ = (u8) (j % 63);
 451                         break;
 452                 }
 453
 454                 if (vary) {
 455                         size += vary;
 456                         size %= max;
 457                         if (size == 0)
 458                                 size = (vary < max) ? vary : max;
 459                 }
 460         }
 461
 462         return sg;
 463 }
 464
 465 static int perform_sglist(
 466         struct usbtest_dev      *tdev,
 467         unsigned                iterations,
 468         int                     pipe,
 469         struct usb_sg_request   *req,
 470         struct scatterlist      *sg,
 471         int                     nents
 472 )
 473 {
 474         struct usb_device       *udev = testdev_to_usbdev(tdev);
 475         int                     retval = 0;
 476
 477         while (retval == 0 && iterations-- > 0) {
 478                 retval = usb_sg_init(req, udev, pipe,
 479                                 (udev->speed == USB_SPEED_HIGH)
 480                                         ? (INTERRUPT_RATE << 3)
 481                                         : INTERRUPT_RATE,
 482                                 sg, nents, 0, GFP_KERNEL);
 483
 484                 if (retval)
 485                         break;
 486                 usb_sg_wait(req);
 487                 retval = req->status;
 488
 489                 /* FIXME check resulting data pattern */
 490
 491                 /* FIXME if endpoint halted, clear halt (and log) */
 492         }
 493
 494         /* FIXME for unlink or fault handling tests, don't report
 495          * failure if retval is as we expected ...
 496          */
 497         if (retval)
 498                 ERROR(tdev, "perform_sglist failed, "
 499                                 "iterations left %d, status %d\n",
 500                                 iterations, retval);
 501         return retval;
 502 }
 503
 504
 505 /*-------------------------------------------------------------------------*/
 506
 507 /* unqueued control message testing
 508  *
 509  * there's a nice set of device functional requirements in chapter 9 of the
 510  * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
 511  * special test firmware.
 512  *
 513  * we know the device is configured (or suspended) by the time it's visible
 514  * through usbfs.  we can't change that, so we won't test enumeration (which
 515  * worked 'well enough' to get here, this time), power management (ditto),
 516  * or remote wakeup (which needs human interaction).
 517  */
 518
 519 static unsigned realworld = 1;
 520 module_param(realworld, uint, 0);
 521 MODULE_PARM_DESC(realworld, "clear to demand stricter spec compliance");
 522
 523 static int get_altsetting(struct usbtest_dev *dev)
 524 {
 525         struct usb_interface    *iface = dev->intf;
 526         struct usb_device       *udev = interface_to_usbdev(iface);
 527         int                     retval;
 528
 529         retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 530                         USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE,
 531                         0, iface->altsetting[0].desc.bInterfaceNumber,
 532                         dev->buf, 1, USB_CTRL_GET_TIMEOUT);
 533         switch (retval) {
 534         case 1:
 535                 return dev->buf[0];
 536         case 0:
 537                 retval = -ERANGE;
 538                 /* FALLTHROUGH */
 539         default:
 540                 return retval;
 541         }
 542 }
 543
 544 static int set_altsetting(struct usbtest_dev *dev, int alternate)
 545 {
 546         struct usb_interface            *iface = dev->intf;
 547         struct usb_device               *udev;
 548
 549         if (alternate < 0 || alternate >= 256)
 550                 return -EINVAL;
 551
 552         udev = interface_to_usbdev(iface);
 553         return usb_set_interface(udev,
 554                         iface->altsetting[0].desc.bInterfaceNumber,
 555                         alternate);
 556 }
 557
 558 static int is_good_config(struct usbtest_dev *tdev, int len)
 559 {
 560         struct usb_config_descriptor    *config;
 561
 562         if (len < sizeof *config)
 563                 return 0;
 564         config = (struct usb_config_descriptor *) tdev->buf;
 565
 566         switch (config->bDescriptorType) {
 567         case USB_DT_CONFIG:
 568         case USB_DT_OTHER_SPEED_CONFIG:
 569                 if (config->bLength != 9) {
 570                         ERROR(tdev, "bogus config descriptor length\n");
 571                         return 0;
 572                 }
 573                 /* this bit 'must be 1' but often isn't */
 574                 if (!realworld && !(config->bmAttributes & 0x80)) {
 575                         ERROR(tdev, "high bit of config attributes not set\n");
 576                         return 0;
 577                 }
 578                 if (config->bmAttributes & 0x1f) {      /* reserved == 0 */
 579                         ERROR(tdev, "reserved config bits set\n");
 580                         return 0;
 581                 }
 582                 break;
 583         default:
 584                 return 0;
 585         }
 586
 587         if (le16_to_cpu(config->wTotalLength) == len)   /* read it all */
 588                 return 1;
 589         if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE)     /* max partial read */
 590                 return 1;
 591         ERROR(tdev, "bogus config descriptor read size\n");
 592         return 0;
 593 }
 594
 595 /* sanity test for standard requests working with usb_control_mesg() and some
 596  * of the utility functions which use it.
 597  *
 598  * this doesn't test how endpoint halts behave or data toggles get set, since
 599  * we won't do I/O to bulk/interrupt endpoints here (which is how to change
 600  * halt or toggle).  toggle testing is impractical without support from hcds.
 601  *
 602  * this avoids failing devices linux would normally work with, by not testing
 603  * config/altsetting operations for devices that only support their defaults.
 604  * such devices rarely support those needless operations.
 605  *
 606  * NOTE that since this is a sanity test, it's not examining boundary cases
 607  * to see if usbcore, hcd, and device all behave right.  such testing would
 608  * involve varied read sizes and other operation sequences.
 609  */
 610 static int ch9_postconfig(struct usbtest_dev *dev)
 611 {
 612         struct usb_interface    *iface = dev->intf;
 613         struct usb_device       *udev = interface_to_usbdev(iface);
 614         int                     i, alt, retval;
 615
 616         /* [9.2.3] if there's more than one altsetting, we need to be able to
 617          * set and get each one.  mostly trusts the descriptors from usbcore.
 618          */
 619         for (i = 0; i < iface->num_altsetting; i++) {
 620
 621                 /* 9.2.3 constrains the range here */
 622                 alt = iface->altsetting[i].desc.bAlternateSetting;
 623                 if (alt < 0 || alt >= iface->num_altsetting) {
 624                         dev_err(&iface->dev,
 625                                         "invalid alt [%d].bAltSetting = %d\n",
 626                                         i, alt);
 627                 }
 628
 629                 /* [real world] get/set unimplemented if there's only one */
 630                 if (realworld && iface->num_altsetting == 1)
 631                         continue;
 632
 633                 /* [9.4.10] set_interface */
 634                 retval = set_altsetting(dev, alt);
 635                 if (retval) {
 636                         dev_err(&iface->dev, "can't set_interface = %d, %d\n",
 637                                         alt, retval);
 638                         return retval;
 639                 }
 640
 641                 /* [9.4.4] get_interface always works */
 642                 retval = get_altsetting(dev);
 643                 if (retval != alt) {
 644                         dev_err(&iface->dev, "get alt should be %d, was %d\n",
 645                                         alt, retval);
 646                         return (retval < 0) ? retval : -EDOM;
 647                 }
 648
 649         }
 650
 651         /* [real world] get_config unimplemented if there's only one */
 652         if (!realworld || udev->descriptor.bNumConfigurations != 1) {
 653                 int     expected = udev->actconfig->desc.bConfigurationValue;
 654
 655                 /* [9.4.2] get_configuration always works
 656                  * ... although some cheap devices (like one TI Hub I've got)
 657                  * won't return config descriptors except before set_config.
 658                  */
 659                 retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 660                                 USB_REQ_GET_CONFIGURATION,
 661                                 USB_DIR_IN | USB_RECIP_DEVICE,
 662                                 0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
 663                 if (retval != 1 || dev->buf[0] != expected) {
 664                         dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
 665                                 retval, dev->buf[0], expected);
 666                         return (retval < 0) ? retval : -EDOM;
 667                 }
 668         }
 669
 670         /* there's always [9.4.3] a device descriptor [9.6.1] */
 671         retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0,
 672                         dev->buf, sizeof udev->descriptor);
 673         if (retval != sizeof udev->descriptor) {
 674                 dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
 675                 return (retval < 0) ? retval : -EDOM;
 676         }
 677
 678         /* there's always [9.4.3] at least one config descriptor [9.6.3] */
 679         for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
 680                 retval = usb_get_descriptor(udev, USB_DT_CONFIG, i,
 681                                 dev->buf, TBUF_SIZE);
 682                 if (!is_good_config(dev, retval)) {
 683                         dev_err(&iface->dev,
 684                                         "config [%d] descriptor --> %d\n",
 685                                         i, retval);
 686                         return (retval < 0) ? retval : -EDOM;
 687                 }
 688
 689                 /* FIXME cross-checking udev->config[i] to make sure usbcore
 690                  * parsed it right (etc) would be good testing paranoia
 691                  */
 692         }
 693
 694         /* and sometimes [9.2.6.6] speed dependent descriptors */
 695         if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) {
 696                 struct usb_qualifier_descriptor *d = NULL;
 697
 698                 /* device qualifier [9.6.2] */
 699                 retval = usb_get_descriptor(udev,
 700                                 USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
 701                                 sizeof(struct usb_qualifier_descriptor));
 702                 if (retval == -EPIPE) {
 703                         if (udev->speed == USB_SPEED_HIGH) {
 704                                 dev_err(&iface->dev,
 705                                                 "hs dev qualifier --> %d\n",
 706                                                 retval);
 707                                 return (retval < 0) ? retval : -EDOM;
 708                         }
 709                         /* usb2.0 but not high-speed capable; fine */
 710                 } else if (retval != sizeof(struct usb_qualifier_descriptor)) {
 711                         dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
 712                         return (retval < 0) ? retval : -EDOM;
 713                 } else
 714                         d = (struct usb_qualifier_descriptor *) dev->buf;
 715
 716                 /* might not have [9.6.2] any other-speed configs [9.6.4] */
 717                 if (d) {
 718                         unsigned max = d->bNumConfigurations;
 719                         for (i = 0; i < max; i++) {
 720                                 retval = usb_get_descriptor(udev,
 721                                         USB_DT_OTHER_SPEED_CONFIG, i,
 722                                         dev->buf, TBUF_SIZE);
 723                                 if (!is_good_config(dev, retval)) {
 724                                         dev_err(&iface->dev,
 725                                                 "other speed config --> %d\n",
 726                                                 retval);
 727                                         return (retval < 0) ? retval : -EDOM;
 728                                 }
 729                         }
 730                 }
 731         }
 732         /* FIXME fetch strings from at least the device descriptor */
 733
 734         /* [9.4.5] get_status always works */
 735         retval = usb_get_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
 736         if (retval != 2) {
 737                 dev_err(&iface->dev, "get dev status --> %d\n", retval);
 738                 return (retval < 0) ? retval : -EDOM;
 739         }
 740
 741         /* FIXME configuration.bmAttributes says if we could try to set/clear
 742          * the device's remote wakeup feature ... if we can, test that here
 743          */
 744
 745         retval = usb_get_status(udev, USB_RECIP_INTERFACE,
 746                         iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
 747         if (retval != 2) {
 748                 dev_err(&iface->dev, "get interface status --> %d\n", retval);
 749                 return (retval < 0) ? retval : -EDOM;
 750         }
 751         /* FIXME get status for each endpoint in the interface */
 752
 753         return 0;
 754 }
 755
 756 /*-------------------------------------------------------------------------*/
 757
 758 /* use ch9 requests to test whether:
 759  *   (a) queues work for control, keeping N subtests queued and
 760  *       active (auto-resubmit) for M loops through the queue.
 761  *   (b) protocol stalls (control-only) will autorecover.
 762  *       it's not like bulk/intr; no halt clearing.
 763  *   (c) short control reads are reported and handled.
 764  *   (d) queues are always processed in-order
 765  */
 766
 767 struct ctrl_ctx {
 768         spinlock_t              lock;
 769         struct usbtest_dev      *dev;
 770         struct completion       complete;
 771         unsigned                count;
 772         unsigned                pending;
 773         int                     status;
 774         struct urb              **urb;
 775         struct usbtest_param    *param;
 776         int                     last;
 777 };
 778
 779 #define NUM_SUBCASES    15              /* how many test subcases here? */
 780
 781 struct subcase {
 782         struct usb_ctrlrequest  setup;
 783         int                     number;
 784         int                     expected;
 785 };
 786
 787 static void ctrl_complete(struct urb *urb)
 788 {
 789         struct ctrl_ctx         *ctx = urb->context;
 790         struct usb_ctrlrequest  *reqp;
 791         struct subcase          *subcase;
 792         int                     status = urb->status;
 793
 794         reqp = (struct usb_ctrlrequest *)urb->setup_packet;
 795         subcase = container_of(reqp, struct subcase, setup);
 796
 797         spin_lock(&ctx->lock);
 798         ctx->count--;
 799         ctx->pending--;
 800
 801         /* queue must transfer and complete in fifo order, unless
 802          * usb_unlink_urb() is used to unlink something not at the
 803          * physical queue head (not tested).
 804          */
 805         if (subcase->number > 0) {
 806                 if ((subcase->number - ctx->last) != 1) {
 807                         ERROR(ctx->dev,
 808                                 "subcase %d completed out of order, last %d\n",
 809                                 subcase->number, ctx->last);
 810                         status = -EDOM;
 811                         ctx->last = subcase->number;
 812                         goto error;
 813                 }
 814         }
 815         ctx->last = subcase->number;
 816
 817         /* succeed or fault in only one way? */
 818         if (status == subcase->expected)
 819                 status = 0;
 820
 821         /* async unlink for cleanup? */
 822         else if (status != -ECONNRESET) {
 823
 824                 /* some faults are allowed, not required */
 825                 if (subcase->expected > 0 && (
 826                           ((status == -subcase->expected        /* happened */
 827                            || status == 0))))                   /* didn't */
 828                         status = 0;
 829                 /* sometimes more than one fault is allowed */
 830                 else if (subcase->number == 12 && status == -EPIPE)
 831                         status = 0;
 832                 else
 833                         ERROR(ctx->dev, "subtest %d error, status %d\n",
 834                                         subcase->number, status);
 835         }
 836
 837         /* unexpected status codes mean errors; ideally, in hardware */
 838         if (status) {
 839 error:
 840                 if (ctx->status == 0) {
 841                         int             i;
 842
 843                         ctx->status = status;
 844                         ERROR(ctx->dev, "control queue %02x.%02x, err %d, "
 845                                         "%d left, subcase %d, len %d/%d\n",
 846                                         reqp->bRequestType, reqp->bRequest,
 847                                         status, ctx->count, subcase->number,
 848                                         urb->actual_length,
 849                                         urb->transfer_buffer_length);
 850
 851                         /* FIXME this "unlink everything" exit route should
 852                          * be a separate test case.
 853                          */
 854
 855                         /* unlink whatever's still pending */
 856                         for (i = 1; i < ctx->param->sglen; i++) {
 857                                 struct urb *u = ctx->urb[
 858                                                         (i + subcase->number)
 859                                                         % ctx->param->sglen];
 860
 861                                 if (u == urb || !u->dev)
 862                                         continue;
 863                                 spin_unlock(&ctx->lock);
 864                                 status = usb_unlink_urb(u);
 865                                 spin_lock(&ctx->lock);
 866                                 switch (status) {
 867                                 case -EINPROGRESS:
 868                                 case -EBUSY:
 869                                 case -EIDRM:
 870                                         continue;
 871                                 default:
 872                                         ERROR(ctx->dev, "urb unlink --> %d\n",
 873                                                         status);
 874                                 }
 875                         }
 876                         status = ctx->status;
 877                 }
 878         }
 879
 880         /* resubmit if we need to, else mark this as done */
 881         if ((status == 0) && (ctx->pending < ctx->count)) {
 882                 status = usb_submit_urb(urb, GFP_ATOMIC);
 883                 if (status != 0) {
 884                         ERROR(ctx->dev,
 885                                 "can't resubmit ctrl %02x.%02x, err %d\n",
 886                                 reqp->bRequestType, reqp->bRequest, status);
 887                         urb->dev = NULL;
 888                 } else
 889                         ctx->pending++;
 890         } else
 891                 urb->dev = NULL;
 892
 893         /* signal completion when nothing's queued */
 894         if (ctx->pending == 0)
 895                 complete(&ctx->complete);
 896         spin_unlock(&ctx->lock);
 897 }
 898
 899 static int
 900 test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
 901 {
 902         struct usb_device       *udev = testdev_to_usbdev(dev);
 903         struct urb              **urb;
 904         struct ctrl_ctx         context;
 905         int                     i;
 906
 907         spin_lock_init(&context.lock);
 908         context.dev = dev;
 909         init_completion(&context.complete);
 910         context.count = param->sglen * param->iterations;
 911         context.pending = 0;
 912         context.status = -ENOMEM;
 913         context.param = param;
 914         context.last = -1;
 915
 916         /* allocate and init the urbs we'll queue.
 917          * as with bulk/intr sglists, sglen is the queue depth; it also
 918          * controls which subtests run (more tests than sglen) or rerun.
 919          */
 920         urb = kcalloc(param->sglen, sizeof(struct urb *), GFP_KERNEL);
 921         if (!urb)
 922                 return -ENOMEM;
 923         for (i = 0; i < param->sglen; i++) {
 924                 int                     pipe = usb_rcvctrlpipe(udev, 0);
 925                 unsigned                len;
 926                 struct urb              *u;
 927                 struct usb_ctrlrequest  req;
 928                 struct subcase          *reqp;
 929
 930                 /* sign of this variable means:
 931                  *  -: tested code must return this (negative) error code
 932                  *  +: tested code may return this (negative too) error code
 933                  */
 934                 int                     expected = 0;
 935
 936                 /* requests here are mostly expected to succeed on any
 937                  * device, but some are chosen to trigger protocol stalls
 938                  * or short reads.
 939                  */
 940                 memset(&req, 0, sizeof req);
 941                 req.bRequest = USB_REQ_GET_DESCRIPTOR;
 942                 req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
 943
 944                 switch (i % NUM_SUBCASES) {
 945                 case 0:         /* get device descriptor */
 946                         req.wValue = cpu_to_le16(USB_DT_DEVICE << 8);
 947                         len = sizeof(struct usb_device_descriptor);
 948                         break;
 949                 case 1:         /* get first config descriptor (only) */
 950                         req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
 951                         len = sizeof(struct usb_config_descriptor);
 952                         break;
 953                 case 2:         /* get altsetting (OFTEN STALLS) */
 954                         req.bRequest = USB_REQ_GET_INTERFACE;
 955                         req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
 956                         /* index = 0 means first interface */
 957                         len = 1;
 958                         expected = EPIPE;
 959                         break;
 960                 case 3:         /* get interface status */
 961                         req.bRequest = USB_REQ_GET_STATUS;
 962                         req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
 963                         /* interface 0 */
 964                         len = 2;
 965                         break;
 966                 case 4:         /* get device status */
 967                         req.bRequest = USB_REQ_GET_STATUS;
 968                         req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
 969                         len = 2;
 970                         break;
 971                 case 5:         /* get device qualifier (MAY STALL) */
 972                         req.wValue = cpu_to_le16 (USB_DT_DEVICE_QUALIFIER << 8);
 973                         len = sizeof(struct usb_qualifier_descriptor);
 974                         if (udev->speed != USB_SPEED_HIGH)
 975                                 expected = EPIPE;
 976                         break;
 977                 case 6:         /* get first config descriptor, plus interface */
 978                         req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
 979                         len = sizeof(struct usb_config_descriptor);
 980                         len += sizeof(struct usb_interface_descriptor);
 981                         break;
 982                 case 7:         /* get interface descriptor (ALWAYS STALLS) */
 983                         req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
 984                         /* interface == 0 */
 985                         len = sizeof(struct usb_interface_descriptor);
 986                         expected = -EPIPE;
 987                         break;
 988                 /* NOTE: two consecutive stalls in the queue here.
 989                  *  that tests fault recovery a bit more aggressively. */
 990                 case 8:         /* clear endpoint halt (MAY STALL) */
 991                         req.bRequest = USB_REQ_CLEAR_FEATURE;
 992                         req.bRequestType = USB_RECIP_ENDPOINT;
 993                         /* wValue 0 == ep halt */
 994                         /* wIndex 0 == ep0 (shouldn't halt!) */
 995                         len = 0;
 996                         pipe = usb_sndctrlpipe(udev, 0);
 997                         expected = EPIPE;
 998                         break;
 999                 case 9:         /* get endpoint status */
1000                         req.bRequest = USB_REQ_GET_STATUS;
1001                         req.bRequestType = USB_DIR_IN|USB_RECIP_ENDPOINT;
1002                         /* endpoint 0 */
1003                         len = 2;
1004                         break;
1005                 case 10:        /* trigger short read (EREMOTEIO) */
1006                         req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
1007                         len = 1024;
1008                         expected = -EREMOTEIO;
1009                         break;
1010                 /* NOTE: two consecutive _different_ faults in the queue. */
1011                 case 11:        /* get endpoint descriptor (ALWAYS STALLS) */
1012                         req.wValue = cpu_to_le16(USB_DT_ENDPOINT << 8);
1013                         /* endpoint == 0 */
1014                         len = sizeof(struct usb_interface_descriptor);
1015                         expected = EPIPE;
1016                         break;
1017                 /* NOTE: sometimes even a third fault in the queue! */
1018                 case 12:        /* get string 0 descriptor (MAY STALL) */
1019                         req.wValue = cpu_to_le16(USB_DT_STRING << 8);
1020                         /* string == 0, for language IDs */
1021                         len = sizeof(struct usb_interface_descriptor);
1022                         /* may succeed when > 4 languages */
1023                         expected = EREMOTEIO;   /* or EPIPE, if no strings */
1024                         break;
1025                 case 13:        /* short read, resembling case 10 */
1026                         req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
1027                         /* last data packet "should" be DATA1, not DATA0 */
1028                         len = 1024 - udev->descriptor.bMaxPacketSize0;
1029                         expected = -EREMOTEIO;
1030                         break;
1031                 case 14:        /* short read; try to fill the last packet */
1032                         req.wValue = cpu_to_le16((USB_DT_DEVICE << 8) | 0);
1033                         /* device descriptor size == 18 bytes */
1034                         len = udev->descriptor.bMaxPacketSize0;
1035                         if (udev->speed == USB_SPEED_SUPER)
1036                                 len = 512;
1037                         switch (len) {
1038                         case 8:
1039                                 len = 24;
1040                                 break;
1041                         case 16:
1042                                 len = 32;
1043                                 break;
1044                         }
1045                         expected = -EREMOTEIO;
1046                         break;
1047                 default:
1048                         ERROR(dev, "bogus number of ctrl queue testcases!\n");
1049                         context.status = -EINVAL;
1050                         goto cleanup;
1051                 }
1052                 req.wLength = cpu_to_le16(len);
1053                 urb[i] = u = simple_alloc_urb(udev, pipe, len);
1054                 if (!u)
1055                         goto cleanup;
1056
1057                 reqp = kmalloc(sizeof *reqp, GFP_KERNEL);
1058                 if (!reqp)
1059                         goto cleanup;
1060                 reqp->setup = req;
1061                 reqp->number = i % NUM_SUBCASES;
1062                 reqp->expected = expected;
1063                 u->setup_packet = (char *) &reqp->setup;
1064
1065                 u->context = &context;
1066                 u->complete = ctrl_complete;
1067         }
1068
1069         /* queue the urbs */
1070         context.urb = urb;
1071         spin_lock_irq(&context.lock);
1072         for (i = 0; i < param->sglen; i++) {
1073                 context.status = usb_submit_urb(urb[i], GFP_ATOMIC);
1074                 if (context.status != 0) {
1075                         ERROR(dev, "can't submit urb[%d], status %d\n",
1076                                         i, context.status);
1077                         context.count = context.pending;
1078                         break;
1079                 }
1080                 context.pending++;
1081         }
1082         spin_unlock_irq(&context.lock);
1083
1084         /* FIXME  set timer and time out; provide a disconnect hook */
1085
1086         /* wait for the last one to complete */
1087         if (context.pending > 0)
1088                 wait_for_completion(&context.complete);
1089
1090 cleanup:
1091         for (i = 0; i < param->sglen; i++) {
1092                 if (!urb[i])
1093                         continue;
1094                 urb[i]->dev = udev;
1095                 kfree(urb[i]->setup_packet);
1096                 simple_free_urb(urb[i]);
1097         }
1098         kfree(urb);
1099         return context.status;
1100 }
1101 #undef NUM_SUBCASES
1102
1103
1104 /*-------------------------------------------------------------------------*/
1105
1106 static void unlink1_callback(struct urb *urb)
1107 {
1108         int     status = urb->status;
1109
1110         /* we "know" -EPIPE (stall) never happens */
1111         if (!status)
1112                 status = usb_submit_urb(urb, GFP_ATOMIC);
1113         if (status) {
1114                 urb->status = status;
1115                 complete(urb->context);
1116         }
1117 }
1118
1119 static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
1120 {
1121         struct urb              *urb;
1122         struct completion       completion;
1123         int                     retval = 0;
1124
1125         init_completion(&completion);
1126         urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size);
1127         if (!urb)
1128                 return -ENOMEM;
1129         urb->context = &completion;
1130         urb->complete = unlink1_callback;
1131
1132         /* keep the endpoint busy.  there are lots of hc/hcd-internal
1133          * states, and testing should get to all of them over time.
1134          *
1135          * FIXME want additional tests for when endpoint is STALLing
1136          * due to errors, or is just NAKing requests.
1137          */
1138         retval = usb_submit_urb(urb, GFP_KERNEL);
1139         if (retval != 0) {
1140                 dev_err(&dev->intf->dev, "submit fail %d\n", retval);
1141                 return retval;
1142         }
1143
1144         /* unlinking that should always work.  variable delay tests more
1145          * hcd states and code paths, even with little other system load.
1146          */
1147         msleep(jiffies % (2 * INTERRUPT_RATE));
1148         if (async) {
1149                 while (!completion_done(&completion)) {
1150                         retval = usb_unlink_urb(urb);
1151
1152                         switch (retval) {
1153                         case -EBUSY:
1154                         case -EIDRM:
1155                                 /* we can't unlink urbs while they're completing
1156                                  * or if they've completed, and we haven't
1157                                  * resubmitted. "normal" drivers would prevent
1158                                  * resubmission, but since we're testing unlink
1159                                  * paths, we can't.
1160                                  */
1161                                 ERROR(dev, "unlink retry\n");
1162                                 continue;
1163                         case 0:
1164                         case -EINPROGRESS:
1165                                 break;
1166
1167                         default:
1168                                 dev_err(&dev->intf->dev,
1169                                         "unlink fail %d\n", retval);
1170                                 return retval;
1171                         }
1172
1173                         break;
1174                 }
1175         } else
1176                 usb_kill_urb(urb);
1177
1178         wait_for_completion(&completion);
1179         retval = urb->status;
1180         simple_free_urb(urb);
1181
1182         if (async)
1183                 return (retval == -ECONNRESET) ? 0 : retval - 1000;
1184         else
1185                 return (retval == -ENOENT || retval == -EPERM) ?
1186                                 0 : retval - 2000;
1187 }
1188
1189 static int unlink_simple(struct usbtest_dev *dev, int pipe, int len)
1190 {
1191         int                     retval = 0;
1192
1193         /* test sync and async paths */
1194         retval = unlink1(dev, pipe, len, 1);
1195         if (!retval)
1196                 retval = unlink1(dev, pipe, len, 0);
1197         return retval;
1198 }
1199
1200 /*-------------------------------------------------------------------------*/
1201
1202 struct queued_ctx {
1203         struct completion       complete;
1204         atomic_t                pending;
1205         unsigned                num;
1206         int                     status;
1207         struct urb              **urbs;
1208 };
1209
1210 static void unlink_queued_callback(struct urb *urb)
1211 {
1212         int                     status = urb->status;
1213         struct queued_ctx       *ctx = urb->context;
1214
1215         if (ctx->status)
1216                 goto done;
1217         if (urb == ctx->urbs[ctx->num - 4] || urb == ctx->urbs[ctx->num - 2]) {
1218                 if (status == -ECONNRESET)
1219                         goto done;
1220                 /* What error should we report if the URB completed normally? */
1221         }
1222         if (status != 0)
1223                 ctx->status = status;
1224
1225  done:
1226         if (atomic_dec_and_test(&ctx->pending))
1227                 complete(&ctx->complete);
1228 }
1229
1230 static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num,
1231                 unsigned size)
1232 {
1233         struct queued_ctx       ctx;
1234         struct usb_device       *udev = testdev_to_usbdev(dev);
1235         void                    *buf;
1236         dma_addr_t              buf_dma;
1237         int                     i;
1238         int                     retval = -ENOMEM;
1239
1240         init_completion(&ctx.complete);
1241         atomic_set(&ctx.pending, 1);    /* One more than the actual value */
1242         ctx.num = num;
1243         ctx.status = 0;
1244
1245         buf = usb_alloc_coherent(udev, size, GFP_KERNEL, &buf_dma);
1246         if (!buf)
1247                 return retval;
1248         memset(buf, 0, size);
1249
1250         /* Allocate and init the urbs we'll queue */
1251         ctx.urbs = kcalloc(num, sizeof(struct urb *), GFP_KERNEL);
1252         if (!ctx.urbs)
1253                 goto free_buf;
1254         for (i = 0; i < num; i++) {
1255                 ctx.urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
1256                 if (!ctx.urbs[i])
1257                         goto free_urbs;
1258                 usb_fill_bulk_urb(ctx.urbs[i], udev, pipe, buf, size,
1259                                 unlink_queued_callback, &ctx);
1260                 ctx.urbs[i]->transfer_dma = buf_dma;
1261                 ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
1262         }
1263
1264         /* Submit all the URBs and then unlink URBs num - 4 and num - 2. */
1265         for (i = 0; i < num; i++) {
1266                 atomic_inc(&ctx.pending);
1267                 retval = usb_submit_urb(ctx.urbs[i], GFP_KERNEL);
1268                 if (retval != 0) {
1269                         dev_err(&dev->intf->dev, "submit urbs[%d] fail %d\n",
1270                                         i, retval);
1271                         atomic_dec(&ctx.pending);
1272                         ctx.status = retval;
1273                         break;
1274                 }
1275         }
1276         if (i == num) {
1277                 usb_unlink_urb(ctx.urbs[num - 4]);
1278                 usb_unlink_urb(ctx.urbs[num - 2]);
1279         } else {
1280                 while (--i >= 0)
1281                         usb_unlink_urb(ctx.urbs[i]);
1282         }
1283
1284         if (atomic_dec_and_test(&ctx.pending))          /* The extra count */
1285                 complete(&ctx.complete);
1286         wait_for_completion(&ctx.complete);
1287         retval = ctx.status;
1288
1289  free_urbs:
1290         for (i = 0; i < num; i++)
1291                 usb_free_urb(ctx.urbs[i]);
1292         kfree(ctx.urbs);
1293  free_buf:
1294         usb_free_coherent(udev, size, buf, buf_dma);
1295         return retval;
1296 }
1297
1298 /*-------------------------------------------------------------------------*/
1299
1300 static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
1301 {
1302         int     retval;
1303         u16     status;
1304
1305         /* shouldn't look or act halted */
1306         retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1307         if (retval < 0) {
1308                 ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
1309                                 ep, retval);
1310                 return retval;
1311         }
1312         if (status != 0) {
1313                 ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status);
1314                 return -EINVAL;
1315         }
1316         retval = simple_io(tdev, urb, 1, 0, 0, __func__);
1317         if (retval != 0)
1318                 return -EINVAL;
1319         return 0;
1320 }
1321
1322 static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
1323 {
1324         int     retval;
1325         u16     status;
1326
1327         /* should look and act halted */
1328         retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1329         if (retval < 0) {
1330                 ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
1331                                 ep, retval);
1332                 return retval;
1333         }
1334         le16_to_cpus(&status);
1335         if (status != 1) {
1336                 ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
1337                 return -EINVAL;
1338         }
1339         retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__);
1340         if (retval != -EPIPE)
1341                 return -EINVAL;
1342         retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted");
1343         if (retval != -EPIPE)
1344                 return -EINVAL;
1345         return 0;
1346 }
1347
1348 static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
1349 {
1350         int     retval;
1351
1352         /* shouldn't look or act halted now */
1353         retval = verify_not_halted(tdev, ep, urb);
1354         if (retval < 0)
1355                 return retval;
1356
1357         /* set halt (protocol test only), verify it worked */
1358         retval = usb_control_msg(urb->dev, usb_sndctrlpipe(urb->dev, 0),
1359                         USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
1360                         USB_ENDPOINT_HALT, ep,
1361                         NULL, 0, USB_CTRL_SET_TIMEOUT);
1362         if (retval < 0) {
1363                 ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval);
1364                 return retval;
1365         }
1366         retval = verify_halted(tdev, ep, urb);
1367         if (retval < 0)
1368                 return retval;
1369
1370         /* clear halt (tests API + protocol), verify it worked */
1371         retval = usb_clear_halt(urb->dev, urb->pipe);
1372         if (retval < 0) {
1373                 ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
1374                 return retval;
1375         }
1376         retval = verify_not_halted(tdev, ep, urb);
1377         if (retval < 0)
1378                 return retval;
1379
1380         /* NOTE:  could also verify SET_INTERFACE clear halts ... */
1381
1382         return 0;
1383 }
1384
1385 static int halt_simple(struct usbtest_dev *dev)
1386 {
1387         int             ep;
1388         int             retval = 0;
1389         struct urb      *urb;
1390
1391         urb = simple_alloc_urb(testdev_to_usbdev(dev), 0, 512);
1392         if (urb == NULL)
1393                 return -ENOMEM;
1394
1395         if (dev->in_pipe) {
1396                 ep = usb_pipeendpoint(dev->in_pipe) | USB_DIR_IN;
1397                 urb->pipe = dev->in_pipe;
1398                 retval = test_halt(dev, ep, urb);
1399                 if (retval < 0)
1400                         goto done;
1401         }
1402
1403         if (dev->out_pipe) {
1404                 ep = usb_pipeendpoint(dev->out_pipe);
1405                 urb->pipe = dev->out_pipe;
1406                 retval = test_halt(dev, ep, urb);
1407         }
1408 done:
1409         simple_free_urb(urb);
1410         return retval;
1411 }
1412
1413 /*-------------------------------------------------------------------------*/
1414
1415 /* Control OUT tests use the vendor control requests from Intel's
1416  * USB 2.0 compliance test device:  write a buffer, read it back.
1417  *
1418  * Intel's spec only _requires_ that it work for one packet, which
1419  * is pretty weak.   Some HCDs place limits here; most devices will
1420  * need to be able to handle more than one OUT data packet.  We'll
1421  * try whatever we're told to try.
1422  */
1423 static int ctrl_out(struct usbtest_dev *dev,
1424                 unsigned count, unsigned length, unsigned vary, unsigned offset)
1425 {
1426         unsigned                i, j, len;
1427         int                     retval;
1428         u8                      *buf;
1429         char                    *what = "?";
1430         struct usb_device       *udev;
1431
1432         if (length < 1 || length > 0xffff || vary >= length)
1433                 return -EINVAL;
1434
1435         buf = kmalloc(length + offset, GFP_KERNEL);
1436         if (!buf)
1437                 return -ENOMEM;
1438
1439         buf += offset;
1440         udev = testdev_to_usbdev(dev);
1441         len = length;
1442         retval = 0;
1443
1444         /* NOTE:  hardware might well act differently if we pushed it
1445          * with lots back-to-back queued requests.
1446          */
1447         for (i = 0; i < count; i++) {
1448                 /* write patterned data */
1449                 for (j = 0; j < len; j++)
1450                         buf[j] = i + j;
1451                 retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
1452                                 0x5b, USB_DIR_OUT|USB_TYPE_VENDOR,
1453                                 0, 0, buf, len, USB_CTRL_SET_TIMEOUT);
1454                 if (retval != len) {
1455                         what = "write";
1456                         if (retval >= 0) {
1457                                 ERROR(dev, "ctrl_out, wlen %d (expected %d)\n",
1458                                                 retval, len);
1459                                 retval = -EBADMSG;
1460                         }
1461                         break;
1462                 }
1463
1464                 /* read it back -- assuming nothing intervened!!  */
1465                 retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
1466                                 0x5c, USB_DIR_IN|USB_TYPE_VENDOR,
1467                                 0, 0, buf, len, USB_CTRL_GET_TIMEOUT);
1468                 if (retval != len) {
1469                         what = "read";
1470                         if (retval >= 0) {
1471                                 ERROR(dev, "ctrl_out, rlen %d (expected %d)\n",
1472                                                 retval, len);
1473                                 retval = -EBADMSG;
1474                         }
1475                         break;
1476                 }
1477
1478                 /* fail if we can't verify */
1479                 for (j = 0; j < len; j++) {
1480                         if (buf[j] != (u8) (i + j)) {
1481                                 ERROR(dev, "ctrl_out, byte %d is %d not %d\n",
1482                                         j, buf[j], (u8) i + j);
1483                                 retval = -EBADMSG;
1484                                 break;
1485                         }
1486                 }
1487                 if (retval < 0) {
1488                         what = "verify";
1489                         break;
1490                 }
1491
1492                 len += vary;
1493
1494                 /* [real world] the "zero bytes IN" case isn't really used.
1495                  * hardware can easily trip up in this weird case, since its
1496                  * status stage is IN, not OUT like other ep0in transfers.
1497                  */
1498                 if (len > length)
1499                         len = realworld ? 1 : 0;
1500         }
1501
1502         if (retval < 0)
1503                 ERROR(dev, "ctrl_out %s failed, code %d, count %d\n",
1504                         what, retval, i);
1505
1506         kfree(buf - offset);
1507         return retval;
1508 }
1509
1510 /*-------------------------------------------------------------------------*/
1511
1512 /* ISO tests ... mimics common usage
1513  *  - buffer length is split into N packets (mostly maxpacket sized)
1514  *  - multi-buffers according to sglen
1515  */
1516
1517 struct iso_context {
1518         unsigned                count;
1519         unsigned                pending;
1520         spinlock_t              lock;
1521         struct completion       done;
1522         int                     submit_error;
1523         unsigned long           errors;
1524         unsigned long           packet_count;
1525         struct usbtest_dev      *dev;
1526 };
1527
1528 static void iso_callback(struct urb *urb)
1529 {
1530         struct iso_context      *ctx = urb->context;
1531
1532         spin_lock(&ctx->lock);
1533         ctx->count--;
1534
1535         ctx->packet_count += urb->number_of_packets;
1536         if (urb->error_count > 0)
1537                 ctx->errors += urb->error_count;
1538         else if (urb->status != 0)
1539                 ctx->errors += urb->number_of_packets;
1540         else if (urb->actual_length != urb->transfer_buffer_length)
1541                 ctx->errors++;
1542         else if (check_guard_bytes(ctx->dev, urb) != 0)
1543                 ctx->errors++;
1544
1545         if (urb->status == 0 && ctx->count > (ctx->pending - 1)
1546                         && !ctx->submit_error) {
1547                 int status = usb_submit_urb(urb, GFP_ATOMIC);
1548                 switch (status) {
1549                 case 0:
1550                         goto done;
1551                 default:
1552                         dev_err(&ctx->dev->intf->dev,
1553                                         "iso resubmit err %d\n",
1554                                         status);
1555                         /* FALLTHROUGH */
1556                 case -ENODEV:                   /* disconnected */
1557                 case -ESHUTDOWN:                /* endpoint disabled */
1558                         ctx->submit_error = 1;
1559                         break;
1560                 }
1561         }
1562
1563         ctx->pending--;
1564         if (ctx->pending == 0) {
1565                 if (ctx->errors)
1566                         dev_err(&ctx->dev->intf->dev,
1567                                 "iso test, %lu errors out of %lu\n",
1568                                 ctx->errors, ctx->packet_count);
1569                 complete(&ctx->done);
1570         }
1571 done:
1572         spin_unlock(&ctx->lock);
1573 }
1574
1575 static struct urb *iso_alloc_urb(
1576         struct usb_device       *udev,
1577         int                     pipe,
1578         struct usb_endpoint_descriptor  *desc,
1579         long                    bytes,
1580         unsigned offset
1581 )
1582 {
1583         struct urb              *urb;
1584         unsigned                i, maxp, packets;
1585
1586         if (bytes < 0 || !desc)
1587                 return NULL;
1588         maxp = 0x7ff & usb_endpoint_maxp(desc);
1589         maxp *= 1 + (0x3 & (usb_endpoint_maxp(desc) >> 11));
1590         packets = DIV_ROUND_UP(bytes, maxp);
1591
1592         urb = usb_alloc_urb(packets, GFP_KERNEL);
1593         if (!urb)
1594                 return urb;
1595         urb->dev = udev;
1596         urb->pipe = pipe;
1597
1598         urb->number_of_packets = packets;
1599         urb->transfer_buffer_length = bytes;
1600         urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
1601                                                         GFP_KERNEL,
1602                                                         &urb->transfer_dma);
1603         if (!urb->transfer_buffer) {
1604                 usb_free_urb(urb);
1605                 return NULL;
1606         }
1607         if (offset) {
1608                 memset(urb->transfer_buffer, GUARD_BYTE, offset);
1609                 urb->transfer_buffer += offset;
1610                 urb->transfer_dma += offset;
1611         }
1612         /* For inbound transfers use guard byte so that test fails if
1613                 data not correctly copied */
1614         memset(urb->transfer_buffer,
1615                         usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
1616                         bytes);
1617
1618         for (i = 0; i < packets; i++) {
1619                 /* here, only the last packet will be short */
1620                 urb->iso_frame_desc[i].length = min((unsigned) bytes, maxp);
1621                 bytes -= urb->iso_frame_desc[i].length;
1622
1623                 urb->iso_frame_desc[i].offset = maxp * i;
1624         }
1625
1626         urb->complete = iso_callback;
1627         /* urb->context = SET BY CALLER */
1628         urb->interval = 1 << (desc->bInterval - 1);
1629         urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
1630         return urb;
1631 }
1632
1633 static int
1634 test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
1635                 int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
1636 {
1637         struct iso_context      context;
1638         struct usb_device       *udev;
1639         unsigned                i;
1640         unsigned long           packets = 0;
1641         int                     status = 0;
1642         struct urb              *urbs[10];      /* FIXME no limit */
1643
1644         if (param->sglen > 10)
1645                 return -EDOM;
1646
1647         memset(&context, 0, sizeof context);
1648         context.count = param->iterations * param->sglen;
1649         context.dev = dev;
1650         init_completion(&context.done);
1651         spin_lock_init(&context.lock);
1652
1653         memset(urbs, 0, sizeof urbs);
1654         udev = testdev_to_usbdev(dev);
1655         dev_info(&dev->intf->dev,
1656                 "... iso period %d %sframes, wMaxPacket %04x\n",
1657                 1 << (desc->bInterval - 1),
1658                 (udev->speed == USB_SPEED_HIGH) ? "micro" : "",
1659                 usb_endpoint_maxp(desc));
1660
1661         for (i = 0; i < param->sglen; i++) {
1662                 urbs[i] = iso_alloc_urb(udev, pipe, desc,
1663                                         param->length, offset);
1664                 if (!urbs[i]) {
1665                         status = -ENOMEM;
1666                         goto fail;
1667                 }
1668                 packets += urbs[i]->number_of_packets;
1669                 urbs[i]->context = &context;
1670         }
1671         packets *= param->iterations;
1672         dev_info(&dev->intf->dev,
1673                 "... total %lu msec (%lu packets)\n",
1674                 (packets * (1 << (desc->bInterval - 1)))
1675                         / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
1676                 packets);
1677
1678         spin_lock_irq(&context.lock);
1679         for (i = 0; i < param->sglen; i++) {
1680                 ++context.pending;
1681                 status = usb_submit_urb(urbs[i], GFP_ATOMIC);
1682                 if (status < 0) {
1683                         ERROR(dev, "submit iso[%d], error %d\n", i, status);
1684                         if (i == 0) {
1685                                 spin_unlock_irq(&context.lock);
1686                                 goto fail;
1687                         }
1688
1689                         simple_free_urb(urbs[i]);
1690                         urbs[i] = NULL;
1691                         context.pending--;
1692                         context.submit_error = 1;
1693                         break;
1694                 }
1695         }
1696         spin_unlock_irq(&context.lock);
1697
1698         wait_for_completion(&context.done);
1699
1700         for (i = 0; i < param->sglen; i++) {
1701                 if (urbs[i])
1702                         simple_free_urb(urbs[i]);
1703         }
1704         /*
1705          * Isochronous transfers are expected to fail sometimes.  As an
1706          * arbitrary limit, we will report an error if any submissions
1707          * fail or if the transfer failure rate is > 10%.
1708          */
1709         if (status != 0)
1710                 ;
1711         else if (context.submit_error)
1712                 status = -EACCES;
1713         else if (context.errors > context.packet_count / 10)
1714                 status = -EIO;
1715         return status;
1716
1717 fail:
1718         for (i = 0; i < param->sglen; i++) {
1719                 if (urbs[i])
1720                         simple_free_urb(urbs[i]);
1721         }
1722         return status;
1723 }
1724
1725 static int test_unaligned_bulk(
1726         struct usbtest_dev *tdev,
1727         int pipe,
1728         unsigned length,
1729         int iterations,
1730         unsigned transfer_flags,
1731         const char *label)
1732 {
1733         int retval;
1734         struct urb *urb = usbtest_alloc_urb(
1735                 testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1);
1736
1737         if (!urb)
1738                 return -ENOMEM;
1739
1740         retval = simple_io(tdev, urb, iterations, 0, 0, label);
1741         simple_free_urb(urb);
1742         return retval;
1743 }
1744
1745 /*-------------------------------------------------------------------------*/
1746
1747 /* We only have this one interface to user space, through usbfs.
1748  * User mode code can scan usbfs to find N different devices (maybe on
1749  * different busses) to use when testing, and allocate one thread per
1750  * test.  So discovery is simplified, and we have no device naming issues.
1751  *
1752  * Don't use these only as stress/load tests.  Use them along with with
1753  * other USB bus activity:  plugging, unplugging, mousing, mp3 playback,
1754  * video capture, and so on.  Run different tests at different times, in
1755  * different sequences.  Nothing here should interact with other devices,
1756  * except indirectly by consuming USB bandwidth and CPU resources for test
1757  * threads and request completion.  But the only way to know that for sure
1758  * is to test when HC queues are in use by many devices.
1759  *
1760  * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
1761  * it locks out usbcore in certain code paths.  Notably, if you disconnect
1762  * the device-under-test, khubd will wait block forever waiting for the
1763  * ioctl to complete ... so that usb_disconnect() can abort the pending
1764  * urbs and then call usbtest_disconnect().  To abort a test, you're best
1765  * off just killing the userspace task and waiting for it to exit.
1766  */
1767
1768 /* No BKL needed */
1769 static int
1770 usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
1771 {
1772         struct usbtest_dev      *dev = usb_get_intfdata(intf);
1773         struct usb_device       *udev = testdev_to_usbdev(dev);
1774         struct usbtest_param    *param = buf;
1775         int                     retval = -EOPNOTSUPP;
1776         struct urb              *urb;
1777         struct scatterlist      *sg;
1778         struct usb_sg_request   req;
1779         struct timeval          start;
1780         unsigned                i;
1781
1782         /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
1783
1784         pattern = mod_pattern;
1785
1786         if (code != USBTEST_REQUEST)
1787                 return -EOPNOTSUPP;
1788
1789         if (param->iterations <= 0)
1790                 return -EINVAL;
1791
1792         if (mutex_lock_interruptible(&dev->lock))
1793                 return -ERESTARTSYS;
1794
1795         /* FIXME: What if a system sleep starts while a test is running? */
1796
1797         /* some devices, like ez-usb default devices, need a non-default
1798          * altsetting to have any active endpoints.  some tests change
1799          * altsettings; force a default so most tests don't need to check.
1800          */
1801         if (dev->info->alt >= 0) {
1802                 int     res;
1803
1804                 if (intf->altsetting->desc.bInterfaceNumber) {
1805                         mutex_unlock(&dev->lock);
1806                         return -ENODEV;
1807                 }
1808                 res = set_altsetting(dev, dev->info->alt);
1809                 if (res) {
1810                         dev_err(&intf->dev,
1811                                         "set altsetting to %d failed, %d\n",
1812                                         dev->info->alt, res);
1813                         mutex_unlock(&dev->lock);
1814                         return res;
1815                 }
1816         }
1817
1818         /*
1819          * Just a bunch of test cases that every HCD is expected to handle.
1820          *
1821          * Some may need specific firmware, though it'd be good to have
1822          * one firmware image to handle all the test cases.
1823          *
1824          * FIXME add more tests!  cancel requests, verify the data, control
1825          * queueing, concurrent read+write threads, and so on.
1826          */
1827         do_gettimeofday(&start);
1828         switch (param->test_num) {
1829
1830         case 0:
1831                 dev_info(&intf->dev, "TEST 0:  NOP\n");
1832                 retval = 0;
1833                 break;
1834
1835         /* Simple non-queued bulk I/O tests */
1836         case 1:
1837                 if (dev->out_pipe == 0)
1838                         break;
1839                 dev_info(&intf->dev,
1840                                 "TEST 1:  write %d bytes %u times\n",
1841                                 param->length, param->iterations);
1842                 urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
1843                 if (!urb) {
1844                         retval = -ENOMEM;
1845                         break;
1846                 }
1847                 /* FIRMWARE:  bulk sink (maybe accepts short writes) */
1848                 retval = simple_io(dev, urb, param->iterations, 0, 0, "test1");
1849                 simple_free_urb(urb);
1850                 break;
1851         case 2:
1852                 if (dev->in_pipe == 0)
1853                         break;
1854                 dev_info(&intf->dev,
1855                                 "TEST 2:  read %d bytes %u times\n",
1856                                 param->length, param->iterations);
1857                 urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
1858                 if (!urb) {
1859                         retval = -ENOMEM;
1860                         break;
1861                 }
1862                 /* FIRMWARE:  bulk source (maybe generates short writes) */
1863                 retval = simple_io(dev, urb, param->iterations, 0, 0, "test2");
1864                 simple_free_urb(urb);
1865                 break;
1866         case 3:
1867                 if (dev->out_pipe == 0 || param->vary == 0)
1868                         break;
1869                 dev_info(&intf->dev,
1870                                 "TEST 3:  write/%d 0..%d bytes %u times\n",
1871                                 param->vary, param->length, param->iterations);
1872                 urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
1873                 if (!urb) {
1874                         retval = -ENOMEM;
1875                         break;
1876                 }
1877                 /* FIRMWARE:  bulk sink (maybe accepts short writes) */
1878                 retval = simple_io(dev, urb, param->iterations, param->vary,
1879                                         0, "test3");
1880                 simple_free_urb(urb);
1881                 break;
1882         case 4:
1883                 if (dev->in_pipe == 0 || param->vary == 0)
1884                         break;
1885                 dev_info(&intf->dev,
1886                                 "TEST 4:  read/%d 0..%d bytes %u times\n",
1887                                 param->vary, param->length, param->iterations);
1888                 urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
1889                 if (!urb) {
1890                         retval = -ENOMEM;
1891                         break;
1892                 }
1893                 /* FIRMWARE:  bulk source (maybe generates short writes) */
1894                 retval = simple_io(dev, urb, param->iterations, param->vary,
1895                                         0, "test4");
1896                 simple_free_urb(urb);
1897                 break;
1898
1899         /* Queued bulk I/O tests */
1900         case 5:
1901                 if (dev->out_pipe == 0 || param->sglen == 0)
1902                         break;
1903                 dev_info(&intf->dev,
1904                         "TEST 5:  write %d sglists %d entries of %d bytes\n",
1905                                 param->iterations,
1906                                 param->sglen, param->length);
1907                 sg = alloc_sglist(param->sglen, param->length, 0);
1908                 if (!sg) {
1909                         retval = -ENOMEM;
1910                         break;
1911                 }
1912                 /* FIRMWARE:  bulk sink (maybe accepts short writes) */
1913                 retval = perform_sglist(dev, param->iterations, dev->out_pipe,
1914                                 &req, sg, param->sglen);
1915                 free_sglist(sg, param->sglen);
1916                 break;
1917
1918         case 6:
1919                 if (dev->in_pipe == 0 || param->sglen == 0)
1920                         break;
1921                 dev_info(&intf->dev,
1922                         "TEST 6:  read %d sglists %d entries of %d bytes\n",
1923                                 param->iterations,
1924                                 param->sglen, param->length);
1925                 sg = alloc_sglist(param->sglen, param->length, 0);
1926                 if (!sg) {
1927                         retval = -ENOMEM;
1928                         break;
1929                 }
1930                 /* FIRMWARE:  bulk source (maybe generates short writes) */
1931                 retval = perform_sglist(dev, param->iterations, dev->in_pipe,
1932                                 &req, sg, param->sglen);
1933                 free_sglist(sg, param->sglen);
1934                 break;
1935         case 7:
1936                 if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
1937                         break;
1938                 dev_info(&intf->dev,
1939                         "TEST 7:  write/%d %d sglists %d entries 0..%d bytes\n",
1940                                 param->vary, param->iterations,
1941                                 param->sglen, param->length);
1942                 sg = alloc_sglist(param->sglen, param->length, param->vary);
1943                 if (!sg) {
1944                         retval = -ENOMEM;
1945                         break;
1946                 }
1947                 /* FIRMWARE:  bulk sink (maybe accepts short writes) */
1948                 retval = perform_sglist(dev, param->iterations, dev->out_pipe,
1949                                 &req, sg, param->sglen);
1950                 free_sglist(sg, param->sglen);
1951                 break;
1952         case 8:
1953                 if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
1954                         break;
1955                 dev_info(&intf->dev,
1956                         "TEST 8:  read/%d %d sglists %d entries 0..%d bytes\n",
1957                                 param->vary, param->iterations,
1958                                 param->sglen, param->length);
1959                 sg = alloc_sglist(param->sglen, param->length, param->vary);
1960                 if (!sg) {
1961                         retval = -ENOMEM;
1962                         break;
1963                 }
1964                 /* FIRMWARE:  bulk source (maybe generates short writes) */
1965                 retval = perform_sglist(dev, param->iterations, dev->in_pipe,
1966                                 &req, sg, param->sglen);
1967                 free_sglist(sg, param->sglen);
1968                 break;
1969
1970         /* non-queued sanity tests for control (chapter 9 subset) */
1971         case 9:
1972                 retval = 0;
1973                 dev_info(&intf->dev,
1974                         "TEST 9:  ch9 (subset) control tests, %d times\n",
1975                                 param->iterations);
1976                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1977                         retval = ch9_postconfig(dev);
1978                 if (retval)
1979                         dev_err(&intf->dev, "ch9 subset failed, "
1980                                         "iterations left %d\n", i);
1981                 break;
1982
1983         /* queued control messaging */
1984         case 10:
1985                 if (param->sglen == 0)
1986                         break;
1987                 retval = 0;
1988                 dev_info(&intf->dev,
1989                                 "TEST 10:  queue %d control calls, %d times\n",
1990                                 param->sglen,
1991                                 param->iterations);
1992                 retval = test_ctrl_queue(dev, param);
1993                 break;
1994
1995         /* simple non-queued unlinks (ring with one urb) */
1996         case 11:
1997                 if (dev->in_pipe == 0 || !param->length)
1998                         break;
1999                 retval = 0;
2000                 dev_info(&intf->dev, "TEST 11:  unlink %d reads of %d\n",
2001                                 param->iterations, param->length);
2002                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
2003                         retval = unlink_simple(dev, dev->in_pipe,
2004                                                 param->length);
2005                 if (retval)
2006                         dev_err(&intf->dev, "unlink reads failed %d, "
2007                                 "iterations left %d\n", retval, i);
2008                 break;
2009         case 12:
2010                 if (dev->out_pipe == 0 || !param->length)
2011                         break;
2012                 retval = 0;
2013                 dev_info(&intf->dev, "TEST 12:  unlink %d writes of %d\n",
2014                                 param->iterations, param->length);
2015                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
2016                         retval = unlink_simple(dev, dev->out_pipe,
2017                                                 param->length);
2018                 if (retval)
2019                         dev_err(&intf->dev, "unlink writes failed %d, "
2020                                 "iterations left %d\n", retval, i);
2021                 break;
2022
2023         /* ep halt tests */
2024         case 13:
2025                 if (dev->out_pipe == 0 && dev->in_pipe == 0)
2026                         break;
2027                 retval = 0;
2028                 dev_info(&intf->dev, "TEST 13:  set/clear %d halts\n",
2029                                 param->iterations);
2030                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
2031                         retval = halt_simple(dev);
2032
2033                 if (retval)
2034                         ERROR(dev, "halts failed, iterations left %d\n", i);
2035                 break;
2036
2037         /* control write tests */
2038         case 14:
2039                 if (!dev->info->ctrl_out)
2040                         break;
2041                 dev_info(&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
2042                                 param->iterations,
2043                                 realworld ? 1 : 0, param->length,
2044                                 param->vary);
2045                 retval = ctrl_out(dev, param->iterations,
2046                                 param->length, param->vary, 0);
2047                 break;
2048
2049         /* iso write tests */
2050         case 15:
2051                 if (dev->out_iso_pipe == 0 || param->sglen == 0)
2052                         break;
2053                 dev_info(&intf->dev,
2054                         "TEST 15:  write %d iso, %d entries of %d bytes\n",
2055                                 param->iterations,
2056                                 param->sglen, param->length);
2057                 /* FIRMWARE:  iso sink */
2058                 retval = test_iso_queue(dev, param,
2059                                 dev->out_iso_pipe, dev->iso_out, 0);
2060                 break;
2061
2062         /* iso read tests */
2063         case 16:
2064                 if (dev->in_iso_pipe == 0 || param->sglen == 0)
2065                         break;
2066                 dev_info(&intf->dev,
2067                         "TEST 16:  read %d iso, %d entries of %d bytes\n",
2068                                 param->iterations,
2069                                 param->sglen, param->length);
2070                 /* FIRMWARE:  iso source */
2071                 retval = test_iso_queue(dev, param,
2072                                 dev->in_iso_pipe, dev->iso_in, 0);
2073                 break;
2074
2075         /* FIXME scatterlist cancel (needs helper thread) */
2076
2077         /* Tests for bulk I/O using DMA mapping by core and odd address */
2078         case 17:
2079                 if (dev->out_pipe == 0)
2080                         break;
2081                 dev_info(&intf->dev,
2082                         "TEST 17:  write odd addr %d bytes %u times core map\n",
2083                         param->length, param->iterations);
2084
2085                 retval = test_unaligned_bulk(
2086                                 dev, dev->out_pipe,
2087                                 param->length, param->iterations,
2088                                 0, "test17");
2089                 break;
2090
2091         case 18:
2092                 if (dev->in_pipe == 0)
2093                         break;
2094                 dev_info(&intf->dev,
2095                         "TEST 18:  read odd addr %d bytes %u times core map\n",
2096                         param->length, param->iterations);
2097
2098                 retval = test_unaligned_bulk(
2099                                 dev, dev->in_pipe,
2100                                 param->length, param->iterations,
2101                                 0, "test18");
2102                 break;
2103
2104         /* Tests for bulk I/O using premapped coherent buffer and odd address */
2105         case 19:
2106                 if (dev->out_pipe == 0)
2107                         break;
2108                 dev_info(&intf->dev,
2109                         "TEST 19:  write odd addr %d bytes %u times premapped\n",
2110                         param->length, param->iterations);
2111
2112                 retval = test_unaligned_bulk(
2113                                 dev, dev->out_pipe,
2114                                 param->length, param->iterations,
2115                                 URB_NO_TRANSFER_DMA_MAP, "test19");
2116                 break;
2117
2118         case 20:
2119                 if (dev->in_pipe == 0)
2120                         break;
2121                 dev_info(&intf->dev,
2122                         "TEST 20:  read odd addr %d bytes %u times premapped\n",
2123                         param->length, param->iterations);
2124
2125                 retval = test_unaligned_bulk(
2126                                 dev, dev->in_pipe,
2127                                 param->length, param->iterations,
2128                                 URB_NO_TRANSFER_DMA_MAP, "test20");
2129                 break;
2130
2131         /* control write tests with unaligned buffer */
2132         case 21:
2133                 if (!dev->info->ctrl_out)
2134                         break;
2135                 dev_info(&intf->dev,
2136                                 "TEST 21:  %d ep0out odd addr, %d..%d vary %d\n",
2137                                 param->iterations,
2138                                 realworld ? 1 : 0, param->length,
2139                                 param->vary);
2140                 retval = ctrl_out(dev, param->iterations,
2141                                 param->length, param->vary, 1);
2142                 break;
2143
2144         /* unaligned iso tests */
2145         case 22:
2146                 if (dev->out_iso_pipe == 0 || param->sglen == 0)
2147                         break;
2148                 dev_info(&intf->dev,
2149                         "TEST 22:  write %d iso odd, %d entries of %d bytes\n",
2150                                 param->iterations,
2151                                 param->sglen, param->length);
2152                 retval = test_iso_queue(dev, param,
2153                                 dev->out_iso_pipe, dev->iso_out, 1);
2154                 break;
2155
2156         case 23:
2157                 if (dev->in_iso_pipe == 0 || param->sglen == 0)
2158                         break;
2159                 dev_info(&intf->dev,
2160                         "TEST 23:  read %d iso odd, %d entries of %d bytes\n",
2161                                 param->iterations,
2162                                 param->sglen, param->length);
2163                 retval = test_iso_queue(dev, param,
2164                                 dev->in_iso_pipe, dev->iso_in, 1);
2165                 break;
2166
2167         /* unlink URBs from a bulk-OUT queue */
2168         case 24:
2169                 if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
2170                         break;
2171                 retval = 0;
2172                 dev_info(&intf->dev, "TEST 17:  unlink from %d queues of "
2173                                 "%d %d-byte writes\n",
2174                                 param->iterations, param->sglen, param->length);
2175                 for (i = param->iterations; retval == 0 && i > 0; --i) {
2176                         retval = unlink_queued(dev, dev->out_pipe,
2177                                                 param->sglen, param->length);
2178                         if (retval) {
2179                                 dev_err(&intf->dev,
2180                                         "unlink queued writes failed %d, "
2181                                         "iterations left %d\n", retval, i);
2182                                 break;
2183                         }
2184                 }
2185                 break;
2186
2187         }
2188         do_gettimeofday(&param->duration);
2189         param->duration.tv_sec -= start.tv_sec;
2190         param->duration.tv_usec -= start.tv_usec;
2191         if (param->duration.tv_usec < 0) {
2192                 param->duration.tv_usec += 1000 * 1000;
2193                 param->duration.tv_sec -= 1;
2194         }
2195         mutex_unlock(&dev->lock);
2196         return retval;
2197 }
2198
2199 /*-------------------------------------------------------------------------*/
2200
2201 static unsigned force_interrupt;
2202 module_param(force_interrupt, uint, 0);
2203 MODULE_PARM_DESC(force_interrupt, "0 = test default; else interrupt");
2204
2205 #ifdef  GENERIC
2206 static unsigned short vendor;
2207 module_param(vendor, ushort, 0);
2208 MODULE_PARM_DESC(vendor, "vendor code (from usb-if)");
2209
2210 static unsigned short product;
2211 module_param(product, ushort, 0);
2212 MODULE_PARM_DESC(product, "product code (from vendor)");
2213 #endif
2214
2215 static int
2216 usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
2217 {
2218         struct usb_device       *udev;
2219         struct usbtest_dev      *dev;
2220         struct usbtest_info     *info;
2221         char                    *rtest, *wtest;
2222         char                    *irtest, *iwtest;
2223
2224         udev = interface_to_usbdev(intf);
2225
2226 #ifdef  GENERIC
2227         /* specify devices by module parameters? */
2228         if (id->match_flags == 0) {
2229                 /* vendor match required, product match optional */
2230                 if (!vendor || le16_to_cpu(udev->descriptor.idVendor) != (u16)vendor)
2231                         return -ENODEV;
2232                 if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
2233                         return -ENODEV;
2234                 dev_info(&intf->dev, "matched module params, "
2235                                         "vend=0x%04x prod=0x%04x\n",
2236                                 le16_to_cpu(udev->descriptor.idVendor),
2237                                 le16_to_cpu(udev->descriptor.idProduct));
2238         }
2239 #endif
2240
2241         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2242         if (!dev)
2243                 return -ENOMEM;
2244         info = (struct usbtest_info *) id->driver_info;
2245         dev->info = info;
2246         mutex_init(&dev->lock);
2247
2248         dev->intf = intf;
2249
2250         /* cacheline-aligned scratch for i/o */
2251         dev->buf = kmalloc(TBUF_SIZE, GFP_KERNEL);
2252         if (dev->buf == NULL) {
2253                 kfree(dev);
2254                 return -ENOMEM;
2255         }
2256
2257         /* NOTE this doesn't yet test the handful of difference that are
2258          * visible with high speed interrupts:  bigger maxpacket (1K) and
2259          * "high bandwidth" modes (up to 3 packets/uframe).
2260          */
2261         rtest = wtest = "";
2262         irtest = iwtest = "";
2263         if (force_interrupt || udev->speed == USB_SPEED_LOW) {
2264                 if (info->ep_in) {
2265                         dev->in_pipe = usb_rcvintpipe(udev, info->ep_in);
2266                         rtest = " intr-in";
2267                 }
2268                 if (info->ep_out) {
2269                         dev->out_pipe = usb_sndintpipe(udev, info->ep_out);
2270                         wtest = " intr-out";
2271                 }
2272         } else {
2273                 if (info->autoconf) {
2274                         int status;
2275
2276                         status = get_endpoints(dev, intf);
2277                         if (status < 0) {
2278                                 WARNING(dev, "couldn't get endpoints, %d\n",
2279                                                 status);
2280                                 return status;
2281                         }
2282                         /* may find bulk or ISO pipes */
2283                 } else {
2284                         if (info->ep_in)
2285                                 dev->in_pipe = usb_rcvbulkpipe(udev,
2286                                                         info->ep_in);
2287                         if (info->ep_out)
2288                                 dev->out_pipe = usb_sndbulkpipe(udev,
2289                                                         info->ep_out);
2290                 }
2291                 if (dev->in_pipe)
2292                         rtest = " bulk-in";
2293                 if (dev->out_pipe)
2294                         wtest = " bulk-out";
2295                 if (dev->in_iso_pipe)
2296                         irtest = " iso-in";
2297                 if (dev->out_iso_pipe)
2298                         iwtest = " iso-out";
2299         }
2300
2301         usb_set_intfdata(intf, dev);
2302         dev_info(&intf->dev, "%s\n", info->name);
2303         dev_info(&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
2304                         ({ char *tmp;
2305                         switch (udev->speed) {
2306                         case USB_SPEED_LOW:
2307                                 tmp = "low";
2308                                 break;
2309                         case USB_SPEED_FULL:
2310                                 tmp = "full";
2311                                 break;
2312                         case USB_SPEED_HIGH:
2313                                 tmp = "high";
2314                                 break;
2315                         case USB_SPEED_SUPER:
2316                                 tmp = "super";
2317                                 break;
2318                         default:
2319                                 tmp = "unknown";
2320                                 break;
2321                         }; tmp; }),
2322                         info->ctrl_out ? " in/out" : "",
2323                         rtest, wtest,
2324                         irtest, iwtest,
2325                         info->alt >= 0 ? " (+alt)" : "");
2326         return 0;
2327 }
2328
2329 static int usbtest_suspend(struct usb_interface *intf, pm_message_t message)
2330 {
2331         return 0;
2332 }
2333
2334 static int usbtest_resume(struct usb_interface *intf)
2335 {
2336         return 0;
2337 }
2338
2339
2340 static void usbtest_disconnect(struct usb_interface *intf)
2341 {
2342         struct usbtest_dev      *dev = usb_get_intfdata(intf);
2343
2344         usb_set_intfdata(intf, NULL);
2345         dev_dbg(&intf->dev, "disconnect\n");
2346         kfree(dev);
2347 }
2348
2349 /* Basic testing only needs a device that can source or sink bulk traffic.
2350  * Any device can test control transfers (default with GENERIC binding).
2351  *
2352  * Several entries work with the default EP0 implementation that's built
2353  * into EZ-USB chips.  There's a default vendor ID which can be overridden
2354  * by (very) small config EEPROMS, but otherwise all these devices act
2355  * identically until firmware is loaded:  only EP0 works.  It turns out
2356  * to be easy to make other endpoints work, without modifying that EP0
2357  * behavior.  For now, we expect that kind of firmware.
2358  */
2359
2360 /* an21xx or fx versions of ez-usb */
2361 static struct usbtest_info ez1_info = {
2362         .name           = "EZ-USB device",
2363         .ep_in          = 2,
2364         .ep_out         = 2,
2365         .alt            = 1,
2366 };
2367
2368 /* fx2 version of ez-usb */
2369 static struct usbtest_info ez2_info = {
2370         .name           = "FX2 device",
2371         .ep_in          = 6,
2372         .ep_out         = 2,
2373         .alt            = 1,
2374 };
2375
2376 /* ezusb family device with dedicated usb test firmware,
2377  */
2378 static struct usbtest_info fw_info = {
2379         .name           = "usb test device",
2380         .ep_in          = 2,
2381         .ep_out         = 2,
2382         .alt            = 1,
2383         .autoconf       = 1,            /* iso and ctrl_out need autoconf */
2384         .ctrl_out       = 1,
2385         .iso            = 1,            /* iso_ep's are #8 in/out */
2386 };
2387
2388 /* peripheral running Linux and 'zero.c' test firmware, or
2389  * its user-mode cousin. different versions of this use
2390  * different hardware with the same vendor/product codes.
2391  * host side MUST rely on the endpoint descriptors.
2392  */
2393 static struct usbtest_info gz_info = {
2394         .name           = "Linux gadget zero",
2395         .autoconf       = 1,
2396         .ctrl_out       = 1,
2397         .alt            = 0,
2398 };
2399
2400 static struct usbtest_info um_info = {
2401         .name           = "Linux user mode test driver",
2402         .autoconf       = 1,
2403         .alt            = -1,
2404 };
2405
2406 static struct usbtest_info um2_info = {
2407         .name           = "Linux user mode ISO test driver",
2408         .autoconf       = 1,
2409         .iso            = 1,
2410         .alt            = -1,
2411 };
2412
2413 #ifdef IBOT2
2414 /* this is a nice source of high speed bulk data;
2415  * uses an FX2, with firmware provided in the device
2416  */
2417 static struct usbtest_info ibot2_info = {
2418         .name           = "iBOT2 webcam",
2419         .ep_in          = 2,
2420         .alt            = -1,
2421 };
2422 #endif
2423
2424 #ifdef GENERIC
2425 /* we can use any device to test control traffic */
2426 static struct usbtest_info generic_info = {
2427         .name           = "Generic USB device",
2428         .alt            = -1,
2429 };
2430 #endif
2431
2432
2433 static const struct usb_device_id id_table[] = {
2434
2435         /*-------------------------------------------------------------*/
2436
2437         /* EZ-USB devices which download firmware to replace (or in our
2438          * case augment) the default device implementation.
2439          */
2440
2441         /* generic EZ-USB FX controller */
2442         { USB_DEVICE(0x0547, 0x2235),
2443                 .driver_info = (unsigned long) &ez1_info,
2444         },
2445
2446         /* CY3671 development board with EZ-USB FX */
2447         { USB_DEVICE(0x0547, 0x0080),
2448                 .driver_info = (unsigned long) &ez1_info,
2449         },
2450
2451         /* generic EZ-USB FX2 controller (or development board) */
2452         { USB_DEVICE(0x04b4, 0x8613),
2453                 .driver_info = (unsigned long) &ez2_info,
2454         },
2455
2456         /* re-enumerated usb test device firmware */
2457         { USB_DEVICE(0xfff0, 0xfff0),
2458                 .driver_info = (unsigned long) &fw_info,
2459         },
2460
2461         /* "Gadget Zero" firmware runs under Linux */
2462         { USB_DEVICE(0x0525, 0xa4a0),
2463                 .driver_info = (unsigned long) &gz_info,
2464         },
2465
2466         /* so does a user-mode variant */
2467         { USB_DEVICE(0x0525, 0xa4a4),
2468                 .driver_info = (unsigned long) &um_info,
2469         },
2470
2471         /* ... and a user-mode variant that talks iso */
2472         { USB_DEVICE(0x0525, 0xa4a3),
2473                 .driver_info = (unsigned long) &um2_info,
2474         },
2475
2476 #ifdef KEYSPAN_19Qi
2477         /* Keyspan 19qi uses an21xx (original EZ-USB) */
2478         /* this does not coexist with the real Keyspan 19qi driver! */
2479         { USB_DEVICE(0x06cd, 0x010b),
2480                 .driver_info = (unsigned long) &ez1_info,
2481         },
2482 #endif
2483
2484         /*-------------------------------------------------------------*/
2485
2486 #ifdef IBOT2
2487         /* iBOT2 makes a nice source of high speed bulk-in data */
2488         /* this does not coexist with a real iBOT2 driver! */
2489         { USB_DEVICE(0x0b62, 0x0059),
2490                 .driver_info = (unsigned long) &ibot2_info,
2491         },
2492 #endif
2493
2494         /*-------------------------------------------------------------*/
2495
2496 #ifdef GENERIC
2497         /* module params can specify devices to use for control tests */
2498         { .driver_info = (unsigned long) &generic_info, },
2499 #endif
2500
2501         /*-------------------------------------------------------------*/
2502
2503         { }
2504 };
2505 MODULE_DEVICE_TABLE(usb, id_table);
2506
2507 static struct usb_driver usbtest_driver = {
2508         .name =         "usbtest",
2509         .id_table =     id_table,
2510         .probe =        usbtest_probe,
2511         .unlocked_ioctl = usbtest_ioctl,
2512         .disconnect =   usbtest_disconnect,
2513         .suspend =      usbtest_suspend,
2514         .resume =       usbtest_resume,
2515 };
2516
2517 /*-------------------------------------------------------------------------*/
2518
2519 static int __init usbtest_init(void)
2520 {
2521 #ifdef GENERIC
2522         if (vendor)
2523                 pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product);
2524 #endif
2525         return usb_register(&usbtest_driver);
2526 }
2527 module_init(usbtest_init);
2528
2529 static void __exit usbtest_exit(void)
2530 {
2531         usb_deregister(&usbtest_driver);
2532 }
2533 module_exit(usbtest_exit);
2534
2535 MODULE_DESCRIPTION("USB Core/HCD Testing Driver");
2536 MODULE_LICENSE("GPL");
2537