drivers/usb/serial/kobil_sct.h

   1 #define SUSBCRequest_SetBaudRateParityAndStopBits       1
   2 #define SUSBCR_SBR_MASK                         0xFF00
   3 #define SUSBCR_SBR_1200                         0x0100
   4 #define SUSBCR_SBR_9600                         0x0200
   5 #define SUSBCR_SBR_19200                        0x0400
   6 #define SUSBCR_SBR_28800                        0x0800
   7 #define SUSBCR_SBR_38400                        0x1000
   8 #define SUSBCR_SBR_57600                        0x2000
   9 #define SUSBCR_SBR_115200                       0x4000
  10
  11 #define SUSBCR_SPASB_MASK                       0x0070
  12 #define SUSBCR_SPASB_NoParity                   0x0010
  13 #define SUSBCR_SPASB_OddParity                  0x0020
  14 #define SUSBCR_SPASB_EvenParity                 0x0040
  15
  16 #define SUSBCR_SPASB_STPMASK                    0x0003
  17 #define SUSBCR_SPASB_1StopBit                   0x0001
  18 #define SUSBCR_SPASB_2StopBits                  0x0002
  19
  20 #define SUSBCRequest_SetStatusLinesOrQueues     2
  21 #define SUSBCR_SSL_SETRTS                       0x0001
  22 #define SUSBCR_SSL_CLRRTS                       0x0002
  23 #define SUSBCR_SSL_SETDTR                       0x0004
  24 #define SUSBCR_SSL_CLRDTR                       0x0010
  25
  26 /* Kill the pending/current writes to the comm port. */
  27 #define SUSBCR_SSL_PURGE_TXABORT                0x0100
  28 /* Kill the pending/current reads to the comm port. */
  29 #define SUSBCR_SSL_PURGE_RXABORT                0x0200
  30 /* Kill the transmit queue if there. */
  31 #define SUSBCR_SSL_PURGE_TXCLEAR                0x0400
  32 /* Kill the typeahead buffer if there. */
  33 #define SUSBCR_SSL_PURGE_RXCLEAR                0x0800
  34
  35 #define SUSBCRequest_GetStatusLineState         4
  36 /* Any Character received */
  37 #define SUSBCR_GSL_RXCHAR                       0x0001
  38 /* Transmitt Queue Empty */
  39 #define SUSBCR_GSL_TXEMPTY                      0x0004
  40 /* CTS changed state */
  41 #define SUSBCR_GSL_CTS                          0x0008
  42 /* DSR changed state */
  43 #define SUSBCR_GSL_DSR                          0x0010
  44 /* RLSD changed state */
  45 #define SUSBCR_GSL_RLSD                         0x0020
  46 /* BREAK received */
  47 #define SUSBCR_GSL_BREAK                        0x0040
  48 /* Line status error occurred */
  49 #define SUSBCR_GSL_ERR                          0x0080
  50 /* Ring signal detected */
  51 #define SUSBCR_GSL_RING                         0x0100
  52
  53 #define SUSBCRequest_Misc                       8
  54 /* use a predefined reset sequence */
  55 #define SUSBCR_MSC_ResetReader                  0x0001
  56 /* use a predefined sequence to reset the internal queues */
  57 #define SUSBCR_MSC_ResetAllQueues               0x0002
  58
  59 #define SUSBCRequest_GetMisc                    0x10
  60
  61 /*
  62  * get the firmware version from device, coded like this 0xHHLLBBPP with
  63  * HH = Firmware Version High Byte
  64  * LL = Firmware Version Low Byte
  65  * BB = Build Number
  66  * PP = Further Attributes
  67  */
  68 #define SUSBCR_MSC_GetFWVersion                 0x0001
  69
  70 /*
  71  * get the hardware version from device coded like this 0xHHLLPPRR with
  72  * HH = Software Version High Byte
  73  * LL = Software Version Low Byte
  74  * PP = Further Attributes
  75  * RR = Reserved for the hardware ID
  76  */
  77 #define SUSBCR_MSC_GetHWVersion                 0x0002