?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.22-rc3
[linux-2.6/next.git] / drivers / pcmcia / au1000_pb1x00.c
blob86c0808d6a057920bfe07412cf1e73c9efff7c2a
1 /*
2 *
3 * Alchemy Semi Pb1x00 boards specific pcmcia routines.
4 *
5 * Copyright 2002 MontaVista Software Inc.
6 * Author: MontaVista Software, Inc.
7 * ppopov@mvista.com or source@mvista.com
8 *
9 * ########################################################################
10 *
11 * This program is free software; you can distribute it and/or modify it
12 * under the terms of the GNU General Public License (Version 2) as
13 * published by the Free Software Foundation.
14 *
15 * This program is distributed in the hope it will be useful, but WITHOUT
16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
23 */
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/ioport.h>
28 #include <linux/kernel.h>
29 #include <linux/tqueue.h>
30 #include <linux/timer.h>
31 #include <linux/mm.h>
32 #include <linux/proc_fs.h>
33 #include <linux/types.h>
34
35 #include <pcmcia/cs_types.h>
36 #include <pcmcia/cs.h>
37 #include <pcmcia/ss.h>
38 #include <pcmcia/bulkmem.h>
39 #include <pcmcia/cistpl.h>
40 #include <pcmcia/bus_ops.h>
41 #include "cs_internal.h"
42
43 #include <asm/io.h>
44 #include <asm/irq.h>
45 #include <asm/system.h>
46
47 #include <asm/au1000.h>
48 #include <asm/au1000_pcmcia.h>
49
50 #define debug(fmt, arg...) do { } while (0)
51
52 #ifdef CONFIG_MIPS_PB1000
53 #include <asm/pb1000.h>
54 #define PCMCIA_IRQ AU1000_GPIO_15
55 #elif defined (CONFIG_MIPS_PB1500)
56 #include <asm/pb1500.h>
57 #define PCMCIA_IRQ AU1500_GPIO_203
58 #elif defined (CONFIG_MIPS_PB1100)
59 #include <asm/pb1100.h>
60 #define PCMCIA_IRQ AU1000_GPIO_11
61 #endif
62
63 static int pb1x00_pcmcia_init(struct pcmcia_init *init)
64 {
65 #ifdef CONFIG_MIPS_PB1000
66 u16 pcr;
67 pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
68
69 au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
70 au_sync_delay(100);
71 au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
72 au_sync();
73
74 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
75 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
76 au_writel(pcr, PB1000_PCR);
77 au_sync_delay(20);
78
79 return PCMCIA_NUM_SOCKS;
80
81 #else /* fixme -- take care of the Pb1500 at some point */
82
83 u16 pcr;
84 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
85 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
86 au_writew(pcr, PCMCIA_BOARD_REG);
87 au_sync_delay(500);
88 return PCMCIA_NUM_SOCKS;
89 #endif
90 }
91
92 static int pb1x00_pcmcia_shutdown(void)
93 {
94 #ifdef CONFIG_MIPS_PB1000
95 u16 pcr;
96 pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
97 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
98 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
99 au_writel(pcr, PB1000_PCR);
100 au_sync_delay(20);
101 return 0;
102 #else
103 u16 pcr;
104 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
105 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
106 au_writew(pcr, PCMCIA_BOARD_REG);
107 au_sync_delay(2);
108 return 0;
109 #endif
110 }
111
112 static int
113 pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
114 {
115 u32 inserted0, inserted1;
116 u16 vs0, vs1;
117
118 #ifdef CONFIG_MIPS_PB1000
119 vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
120 inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
121 inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
122 vs0 = (vs0 >> 4) & 0x3;
123 vs1 = (vs1 >> 12) & 0x3;
124 #else
125 vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
126 #ifdef CONFIG_MIPS_PB1500
127 inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
128 #else /* Pb1100 */
129 inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
130 #endif
131 inserted1 = 0;
132 #endif
133
134 state->ready = 0;
135 state->vs_Xv = 0;
136 state->vs_3v = 0;
137 state->detect = 0;
138
139 if (sock == 0) {
140 if (inserted0) {
141 switch (vs0) {
142 case 0:
143 case 2:
144 state->vs_3v=1;
145 break;
146 case 3: /* 5V */
147 break;
148 default:
149 /* return without setting 'detect' */
150 printk(KERN_ERR "pb1x00 bad VS (%d)\n",
151 vs0);
152 return 0;
153 }
154 state->detect = 1;
155 }
156 }
157 else {
158 if (inserted1) {
159 switch (vs1) {
160 case 0:
161 case 2:
162 state->vs_3v=1;
163 break;
164 case 3: /* 5V */
165 break;
166 default:
167 /* return without setting 'detect' */
168 printk(KERN_ERR "pb1x00 bad VS (%d)\n",
169 vs1);
170 return 0;
171 }
172 state->detect = 1;
173 }
174 }
175
176 if (state->detect) {
177 state->ready = 1;
178 }
179
180 state->bvd1=1;
181 state->bvd2=1;
182 state->wrprot=0;
183 return 1;
184 }
185
186
187 static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
188 {
189
190 if(info->sock > PCMCIA_MAX_SOCK) return -1;
191
192 /*
193 * Even in the case of the Pb1000, both sockets are connected
194 * to the same irq line.
195 */
196 info->irq = PCMCIA_IRQ;
197
198 return 0;
199 }
200
201
202 static int
203 pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
204 {
205 u16 pcr;
206
207 if(configure->sock > PCMCIA_MAX_SOCK) return -1;
208
209 #ifdef CONFIG_MIPS_PB1000
210 pcr = au_readl(PB1000_PCR);
211
212 if (configure->sock == 0) {
213 pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 |
214 PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
215 }
216 else {
217 pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 |
218 PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
219 }
220
221 pcr &= ~PCR_SLOT_0_RST;
222 debug("Vcc %dV Vpp %dV, pcr %x\n",
223 configure->vcc, configure->vpp, pcr);
224 switch(configure->vcc){
225 case 0: /* Vcc 0 */
226 switch(configure->vpp) {
227 case 0:
228 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
229 configure->sock);
230 break;
231 case 12:
232 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
233 configure->sock);
234 break;
235 case 50:
236 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
237 configure->sock);
238 break;
239 case 33:
240 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
241 configure->sock);
242 break;
243 default:
244 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
245 configure->sock);
246 printk("%s: bad Vcc/Vpp (%d:%d)\n",
247 __FUNCTION__,
248 configure->vcc,
249 configure->vpp);
250 break;
251 }
252 break;
253 case 50: /* Vcc 5V */
254 switch(configure->vpp) {
255 case 0:
256 pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
257 configure->sock);
258 break;
259 case 50:
260 pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
261 configure->sock);
262 break;
263 case 12:
264 pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
265 configure->sock);
266 break;
267 case 33:
268 pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
269 configure->sock);
270 break;
271 default:
272 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
273 configure->sock);
274 printk("%s: bad Vcc/Vpp (%d:%d)\n",
275 __FUNCTION__,
276 configure->vcc,
277 configure->vpp);
278 break;
279 }
280 break;
281 case 33: /* Vcc 3.3V */
282 switch(configure->vpp) {
283 case 0:
284 pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
285 configure->sock);
286 break;
287 case 50:
288 pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
289 configure->sock);
290 break;
291 case 12:
292 pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
293 configure->sock);
294 break;
295 case 33:
296 pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
297 configure->sock);
298 break;
299 default:
300 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
301 configure->sock);
302 printk("%s: bad Vcc/Vpp (%d:%d)\n",
303 __FUNCTION__,
304 configure->vcc,
305 configure->vpp);
306 break;
307 }
308 break;
309 default: /* what's this ? */
310 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
311 printk(KERN_ERR "%s: bad Vcc %d\n",
312 __FUNCTION__, configure->vcc);
313 break;
314 }
315
316 if (configure->sock == 0) {
317 pcr &= ~(PCR_SLOT_0_RST);
318 if (configure->reset)
319 pcr |= PCR_SLOT_0_RST;
320 }
321 else {
322 pcr &= ~(PCR_SLOT_1_RST);
323 if (configure->reset)
324 pcr |= PCR_SLOT_1_RST;
325 }
326 au_writel(pcr, PB1000_PCR);
327 au_sync_delay(300);
328
329 #else
330
331 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
332
333 debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n",
334 configure->vcc, configure->vpp, pcr, configure->reset);
335
336
337 switch(configure->vcc){
338 case 0: /* Vcc 0 */
339 pcr |= SET_VCC_VPP(0,0);
340 break;
341 case 50: /* Vcc 5V */
342 switch(configure->vpp) {
343 case 0:
344 pcr |= SET_VCC_VPP(2,0);
345 break;
346 case 50:
347 pcr |= SET_VCC_VPP(2,1);
348 break;
349 case 12:
350 pcr |= SET_VCC_VPP(2,2);
351 break;
352 case 33:
353 default:
354 pcr |= SET_VCC_VPP(0,0);
355 printk("%s: bad Vcc/Vpp (%d:%d)\n",
356 __FUNCTION__,
357 configure->vcc,
358 configure->vpp);
359 break;
360 }
361 break;
362 case 33: /* Vcc 3.3V */
363 switch(configure->vpp) {
364 case 0:
365 pcr |= SET_VCC_VPP(1,0);
366 break;
367 case 12:
368 pcr |= SET_VCC_VPP(1,2);
369 break;
370 case 33:
371 pcr |= SET_VCC_VPP(1,1);
372 break;
373 case 50:
374 default:
375 pcr |= SET_VCC_VPP(0,0);
376 printk("%s: bad Vcc/Vpp (%d:%d)\n",
377 __FUNCTION__,
378 configure->vcc,
379 configure->vpp);
380 break;
381 }
382 break;
383 default: /* what's this ? */
384 pcr |= SET_VCC_VPP(0,0);
385 printk(KERN_ERR "%s: bad Vcc %d\n",
386 __FUNCTION__, configure->vcc);
387 break;
388 }
389
390 au_writew(pcr, PCMCIA_BOARD_REG);
391 au_sync_delay(300);
392
393 if (!configure->reset) {
394 pcr |= PC_DRV_EN;
395 au_writew(pcr, PCMCIA_BOARD_REG);
396 au_sync_delay(100);
397 pcr |= PC_DEASSERT_RST;
398 au_writew(pcr, PCMCIA_BOARD_REG);
399 au_sync_delay(100);
400 }
401 else {
402 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
403 au_writew(pcr, PCMCIA_BOARD_REG);
404 au_sync_delay(100);
405 }
406 #endif
407 return 0;
408 }
409
410
411 struct pcmcia_low_level pb1x00_pcmcia_ops = {
412 pb1x00_pcmcia_init,
413 pb1x00_pcmcia_shutdown,
414 pb1x00_pcmcia_socket_state,
415 pb1x00_pcmcia_get_irq_info,
416 pb1x00_pcmcia_configure_socket
417 };
linux-next