include: convert various register fcns to macros to avoid include chaining
[linux-2.6/next.git] / include / linux / uio_driver.h
blob04cdc4705878374cab857ab0dcf005e99329bc1d
1 /*
2 * include/linux/uio_driver.h
4 * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
5 * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
6 * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
7 * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
9 * Userspace IO driver.
11 * Licensed under the GPLv2 only.
14 #ifndef _UIO_DRIVER_H_
15 #define _UIO_DRIVER_H_
17 #include <linux/module.h>
18 #include <linux/fs.h>
19 #include <linux/interrupt.h>
21 struct uio_map;
23 /**
24 * struct uio_mem - description of a UIO memory region
25 * @name: name of the memory region for identification
26 * @addr: address of the device's memory
27 * @size: size of IO
28 * @memtype: type of memory addr points to
29 * @internal_addr: ioremap-ped version of addr, for driver internal use
30 * @map: for use by the UIO core only.
32 struct uio_mem {
33 const char *name;
34 unsigned long addr;
35 unsigned long size;
36 int memtype;
37 void __iomem *internal_addr;
38 struct uio_map *map;
41 #define MAX_UIO_MAPS 5
43 struct uio_portio;
45 /**
46 * struct uio_port - description of a UIO port region
47 * @name: name of the port region for identification
48 * @start: start of port region
49 * @size: size of port region
50 * @porttype: type of port (see UIO_PORT_* below)
51 * @portio: for use by the UIO core only.
53 struct uio_port {
54 const char *name;
55 unsigned long start;
56 unsigned long size;
57 int porttype;
58 struct uio_portio *portio;
61 #define MAX_UIO_PORT_REGIONS 5
63 struct uio_device;
65 /**
66 * struct uio_info - UIO device capabilities
67 * @uio_dev: the UIO device this info belongs to
68 * @name: device name
69 * @version: device driver version
70 * @mem: list of mappable memory regions, size==0 for end of list
71 * @port: list of port regions, size==0 for end of list
72 * @irq: interrupt number or UIO_IRQ_CUSTOM
73 * @irq_flags: flags for request_irq()
74 * @priv: optional private data
75 * @handler: the device's irq handler
76 * @mmap: mmap operation for this uio device
77 * @open: open operation for this uio device
78 * @release: release operation for this uio device
79 * @irqcontrol: disable/enable irqs when 0/1 is written to /dev/uioX
81 struct uio_info {
82 struct uio_device *uio_dev;
83 const char *name;
84 const char *version;
85 struct uio_mem mem[MAX_UIO_MAPS];
86 struct uio_port port[MAX_UIO_PORT_REGIONS];
87 long irq;
88 unsigned long irq_flags;
89 void *priv;
90 irqreturn_t (*handler)(int irq, struct uio_info *dev_info);
91 int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
92 int (*open)(struct uio_info *info, struct inode *inode);
93 int (*release)(struct uio_info *info, struct inode *inode);
94 int (*irqcontrol)(struct uio_info *info, s32 irq_on);
97 extern int __must_check
98 __uio_register_device(struct module *owner,
99 struct device *parent,
100 struct uio_info *info);
102 /* use a define to avoid include chaining to get THIS_MODULE */
103 #define uio_register_device(parent, info) \
104 __uio_register_device(THIS_MODULE, parent, info)
106 extern void uio_unregister_device(struct uio_info *info);
107 extern void uio_event_notify(struct uio_info *info);
109 /* defines for uio_info->irq */
110 #define UIO_IRQ_CUSTOM -1
111 #define UIO_IRQ_NONE 0
113 /* defines for uio_mem->memtype */
114 #define UIO_MEM_NONE 0
115 #define UIO_MEM_PHYS 1
116 #define UIO_MEM_LOGICAL 2
117 #define UIO_MEM_VIRTUAL 3
119 /* defines for uio_port->porttype */
120 #define UIO_PORT_NONE 0
121 #define UIO_PORT_X86 1
122 #define UIO_PORT_GPIO 2
123 #define UIO_PORT_OTHER 3
125 #endif /* _LINUX_UIO_DRIVER_H_ */