1 /* ------------------------------------------------------------
3 * (C) Copyright IBM Corporation 1994, 2004
4 * Authors: Colin DeVilbiss (devilbis@us.ibm.com)
5 * Santiago Leon (santil@us.ibm.com)
6 * Dave Boutcher (sleddog@us.ibm.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
23 * ------------------------------------------------------------
24 * Emulation of a SCSI host adapter for Virtual I/O devices
26 * This driver supports the SCSI adapter implemented by the IBM
27 * Power5 firmware. That SCSI adapter is not a physical adapter,
28 * but allows Linux SCSI peripheral drivers to directly
29 * access devices in another logical partition on the physical system.
31 * The virtual adapter(s) are present in the open firmware device
32 * tree just like real adapters.
34 * One of the capabilities provided on these systems is the ability
35 * to DMA between partitions. The architecture states that for VSCSI,
36 * the server side is allowed to DMA to and from the client. The client
37 * is never trusted to DMA to or from the server directly.
39 * Messages are sent between partitions on a "Command/Response Queue"
40 * (CRQ), which is just a buffer of 16 byte entries in the receiver's
41 * Senders cannot access the buffer directly, but send messages by
42 * making a hypervisor call and passing in the 16 bytes. The hypervisor
43 * puts the message in the next 16 byte space in round-robbin fashion,
44 * turns on the high order bit of the message (the valid bit), and
45 * generates an interrupt to the receiver (if interrupts are turned on.)
46 * The receiver just turns off the valid bit when they have copied out
49 * The VSCSI client builds a SCSI Remote Protocol (SRP) Information Unit
50 * (IU) (as defined in the T10 standard available at www.t10.org), gets
51 * a DMA address for the message, and sends it to the server as the
52 * payload of a CRQ message. The server DMAs the SRP IU and processes it,
53 * including doing any additional data transfers. When it is done, it
54 * DMAs the SRP response back to the same address as the request came from,
55 * and sends a CRQ message back to inform the client that the request has
58 * Note that some of the underlying infrastructure is different between
59 * machines conforming to the "RS/6000 Platform Architecture" (RPA) and
60 * the older iSeries hypervisor models. To support both, some low level
61 * routines have been broken out into rpa_vscsi.c and iseries_vscsi.c.
62 * The Makefile should pick one, not two, not zero, of these.
64 * TODO: This is currently pretty tied to the IBM i/pSeries hypervisor
65 * interfaces. It would be really nice to abstract this above an RDMA
69 #include <linux/module.h>
70 #include <linux/moduleparam.h>
71 #include <linux/dma-mapping.h>
72 #include <linux/delay.h>
73 #include <asm/firmware.h>
75 #include <asm/firmware.h>
76 #include <scsi/scsi.h>
77 #include <scsi/scsi_cmnd.h>
78 #include <scsi/scsi_host.h>
79 #include <scsi/scsi_device.h>
80 #include <scsi/scsi_transport_srp.h>
83 /* The values below are somewhat arbitrary default values, but
84 * OS/400 will use 3 busses (disks, CDs, tapes, I think.)
85 * Note that there are 3 bits of channel value, 6 bits of id, and
88 static int max_id
= 64;
89 static int max_channel
= 3;
90 static int init_timeout
= 5;
91 static int max_requests
= IBMVSCSI_MAX_REQUESTS_DEFAULT
;
93 static struct scsi_transport_template
*ibmvscsi_transport_template
;
95 #define IBMVSCSI_VERSION "1.5.8"
97 static struct ibmvscsi_ops
*ibmvscsi_ops
;
99 MODULE_DESCRIPTION("IBM Virtual SCSI");
100 MODULE_AUTHOR("Dave Boutcher");
101 MODULE_LICENSE("GPL");
102 MODULE_VERSION(IBMVSCSI_VERSION
);
104 module_param_named(max_id
, max_id
, int, S_IRUGO
| S_IWUSR
);
105 MODULE_PARM_DESC(max_id
, "Largest ID value for each channel");
106 module_param_named(max_channel
, max_channel
, int, S_IRUGO
| S_IWUSR
);
107 MODULE_PARM_DESC(max_channel
, "Largest channel value");
108 module_param_named(init_timeout
, init_timeout
, int, S_IRUGO
| S_IWUSR
);
109 MODULE_PARM_DESC(init_timeout
, "Initialization timeout in seconds");
110 module_param_named(max_requests
, max_requests
, int, S_IRUGO
| S_IWUSR
);
111 MODULE_PARM_DESC(max_requests
, "Maximum requests for this adapter");
113 /* ------------------------------------------------------------
114 * Routines for the event pool and event structs
117 * initialize_event_pool: - Allocates and initializes the event pool for a host
118 * @pool: event_pool to be initialized
119 * @size: Number of events in pool
120 * @hostdata: ibmvscsi_host_data who owns the event pool
122 * Returns zero on success.
124 static int initialize_event_pool(struct event_pool
*pool
,
125 int size
, struct ibmvscsi_host_data
*hostdata
)
131 pool
->events
= kcalloc(pool
->size
, sizeof(*pool
->events
), GFP_KERNEL
);
136 dma_alloc_coherent(hostdata
->dev
,
137 pool
->size
* sizeof(*pool
->iu_storage
),
139 if (!pool
->iu_storage
) {
144 for (i
= 0; i
< pool
->size
; ++i
) {
145 struct srp_event_struct
*evt
= &pool
->events
[i
];
146 memset(&evt
->crq
, 0x00, sizeof(evt
->crq
));
147 atomic_set(&evt
->free
, 1);
148 evt
->crq
.valid
= 0x80;
149 evt
->crq
.IU_length
= sizeof(*evt
->xfer_iu
);
150 evt
->crq
.IU_data_ptr
= pool
->iu_token
+
151 sizeof(*evt
->xfer_iu
) * i
;
152 evt
->xfer_iu
= pool
->iu_storage
+ i
;
153 evt
->hostdata
= hostdata
;
154 evt
->ext_list
= NULL
;
155 evt
->ext_list_token
= 0;
162 * release_event_pool: - Frees memory of an event pool of a host
163 * @pool: event_pool to be released
164 * @hostdata: ibmvscsi_host_data who owns the even pool
166 * Returns zero on success.
168 static void release_event_pool(struct event_pool
*pool
,
169 struct ibmvscsi_host_data
*hostdata
)
172 for (i
= 0; i
< pool
->size
; ++i
) {
173 if (atomic_read(&pool
->events
[i
].free
) != 1)
175 if (pool
->events
[i
].ext_list
) {
176 dma_free_coherent(hostdata
->dev
,
177 SG_ALL
* sizeof(struct srp_direct_buf
),
178 pool
->events
[i
].ext_list
,
179 pool
->events
[i
].ext_list_token
);
183 dev_warn(hostdata
->dev
, "releasing event pool with %d "
184 "events still in use?\n", in_use
);
186 dma_free_coherent(hostdata
->dev
,
187 pool
->size
* sizeof(*pool
->iu_storage
),
188 pool
->iu_storage
, pool
->iu_token
);
192 * valid_event_struct: - Determines if event is valid.
193 * @pool: event_pool that contains the event
194 * @evt: srp_event_struct to be checked for validity
196 * Returns zero if event is invalid, one otherwise.
198 static int valid_event_struct(struct event_pool
*pool
,
199 struct srp_event_struct
*evt
)
201 int index
= evt
- pool
->events
;
202 if (index
< 0 || index
>= pool
->size
) /* outside of bounds */
204 if (evt
!= pool
->events
+ index
) /* unaligned */
210 * ibmvscsi_free-event_struct: - Changes status of event to "free"
211 * @pool: event_pool that contains the event
212 * @evt: srp_event_struct to be modified
215 static void free_event_struct(struct event_pool
*pool
,
216 struct srp_event_struct
*evt
)
218 if (!valid_event_struct(pool
, evt
)) {
219 dev_err(evt
->hostdata
->dev
, "Freeing invalid event_struct %p "
220 "(not in pool %p)\n", evt
, pool
->events
);
223 if (atomic_inc_return(&evt
->free
) != 1) {
224 dev_err(evt
->hostdata
->dev
, "Freeing event_struct %p "
225 "which is not in use!\n", evt
);
231 * get_evt_struct: - Gets the next free event in pool
232 * @pool: event_pool that contains the events to be searched
234 * Returns the next event in "free" state, and NULL if none are free.
235 * Note that no synchronization is done here, we assume the host_lock
236 * will syncrhonze things.
238 static struct srp_event_struct
*get_event_struct(struct event_pool
*pool
)
241 int poolsize
= pool
->size
;
242 int offset
= pool
->next
;
244 for (i
= 0; i
< poolsize
; i
++) {
245 offset
= (offset
+ 1) % poolsize
;
246 if (!atomic_dec_if_positive(&pool
->events
[offset
].free
)) {
248 return &pool
->events
[offset
];
252 printk(KERN_ERR
"ibmvscsi: found no event struct in pool!\n");
257 * init_event_struct: Initialize fields in an event struct that are always
260 * @done: Routine to call when the event is responded to
261 * @format: SRP or MAD format
262 * @timeout: timeout value set in the CRQ
264 static void init_event_struct(struct srp_event_struct
*evt_struct
,
265 void (*done
) (struct srp_event_struct
*),
269 evt_struct
->cmnd
= NULL
;
270 evt_struct
->cmnd_done
= NULL
;
271 evt_struct
->sync_srp
= NULL
;
272 evt_struct
->crq
.format
= format
;
273 evt_struct
->crq
.timeout
= timeout
;
274 evt_struct
->done
= done
;
277 /* ------------------------------------------------------------
278 * Routines for receiving SCSI responses from the hosting partition
282 * set_srp_direction: Set the fields in the srp related to data
283 * direction and number of buffers based on the direction in
284 * the scsi_cmnd and the number of buffers
286 static void set_srp_direction(struct scsi_cmnd
*cmd
,
287 struct srp_cmd
*srp_cmd
,
296 fmt
= SRP_DATA_DESC_DIRECT
;
298 fmt
= SRP_DATA_DESC_INDIRECT
;
299 numbuf
= min(numbuf
, MAX_INDIRECT_BUFS
);
301 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
302 srp_cmd
->data_out_desc_cnt
= numbuf
;
304 srp_cmd
->data_in_desc_cnt
= numbuf
;
307 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
308 srp_cmd
->buf_fmt
= fmt
<< 4;
310 srp_cmd
->buf_fmt
= fmt
;
313 static void unmap_sg_list(int num_entries
,
315 struct srp_direct_buf
*md
)
319 for (i
= 0; i
< num_entries
; ++i
)
320 dma_unmap_single(dev
, md
[i
].va
, md
[i
].len
, DMA_BIDIRECTIONAL
);
324 * unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
325 * @cmd: srp_cmd whose additional_data member will be unmapped
326 * @dev: device for which the memory is mapped
329 static void unmap_cmd_data(struct srp_cmd
*cmd
,
330 struct srp_event_struct
*evt_struct
,
335 out_fmt
= cmd
->buf_fmt
>> 4;
336 in_fmt
= cmd
->buf_fmt
& ((1U << 4) - 1);
338 if (out_fmt
== SRP_NO_DATA_DESC
&& in_fmt
== SRP_NO_DATA_DESC
)
340 else if (out_fmt
== SRP_DATA_DESC_DIRECT
||
341 in_fmt
== SRP_DATA_DESC_DIRECT
) {
342 struct srp_direct_buf
*data
=
343 (struct srp_direct_buf
*) cmd
->add_data
;
344 dma_unmap_single(dev
, data
->va
, data
->len
, DMA_BIDIRECTIONAL
);
346 struct srp_indirect_buf
*indirect
=
347 (struct srp_indirect_buf
*) cmd
->add_data
;
348 int num_mapped
= indirect
->table_desc
.len
/
349 sizeof(struct srp_direct_buf
);
351 if (num_mapped
<= MAX_INDIRECT_BUFS
) {
352 unmap_sg_list(num_mapped
, dev
, &indirect
->desc_list
[0]);
356 unmap_sg_list(num_mapped
, dev
, evt_struct
->ext_list
);
360 static int map_sg_list(struct scsi_cmnd
*cmd
, int nseg
,
361 struct srp_direct_buf
*md
)
364 struct scatterlist
*sg
;
365 u64 total_length
= 0;
367 scsi_for_each_sg(cmd
, sg
, nseg
, i
) {
368 struct srp_direct_buf
*descr
= md
+ i
;
369 descr
->va
= sg_dma_address(sg
);
370 descr
->len
= sg_dma_len(sg
);
372 total_length
+= sg_dma_len(sg
);
378 * map_sg_data: - Maps dma for a scatterlist and initializes decriptor fields
379 * @cmd: Scsi_Cmnd with the scatterlist
380 * @srp_cmd: srp_cmd that contains the memory descriptor
381 * @dev: device for which to map dma memory
383 * Called by map_data_for_srp_cmd() when building srp cmd from scsi cmd.
384 * Returns 1 on success.
386 static int map_sg_data(struct scsi_cmnd
*cmd
,
387 struct srp_event_struct
*evt_struct
,
388 struct srp_cmd
*srp_cmd
, struct device
*dev
)
392 u64 total_length
= 0;
393 struct srp_direct_buf
*data
=
394 (struct srp_direct_buf
*) srp_cmd
->add_data
;
395 struct srp_indirect_buf
*indirect
=
396 (struct srp_indirect_buf
*) data
;
398 sg_mapped
= scsi_dma_map(cmd
);
401 else if (sg_mapped
< 0)
404 set_srp_direction(cmd
, srp_cmd
, sg_mapped
);
406 /* special case; we can use a single direct descriptor */
407 if (sg_mapped
== 1) {
408 map_sg_list(cmd
, sg_mapped
, data
);
412 indirect
->table_desc
.va
= 0;
413 indirect
->table_desc
.len
= sg_mapped
* sizeof(struct srp_direct_buf
);
414 indirect
->table_desc
.key
= 0;
416 if (sg_mapped
<= MAX_INDIRECT_BUFS
) {
417 total_length
= map_sg_list(cmd
, sg_mapped
,
418 &indirect
->desc_list
[0]);
419 indirect
->len
= total_length
;
423 /* get indirect table */
424 if (!evt_struct
->ext_list
) {
425 evt_struct
->ext_list
= (struct srp_direct_buf
*)
426 dma_alloc_coherent(dev
,
427 SG_ALL
* sizeof(struct srp_direct_buf
),
428 &evt_struct
->ext_list_token
, 0);
429 if (!evt_struct
->ext_list
) {
430 if (!firmware_has_feature(FW_FEATURE_CMO
))
431 sdev_printk(KERN_ERR
, cmd
->device
,
432 "Can't allocate memory "
433 "for indirect table\n");
438 total_length
= map_sg_list(cmd
, sg_mapped
, evt_struct
->ext_list
);
440 indirect
->len
= total_length
;
441 indirect
->table_desc
.va
= evt_struct
->ext_list_token
;
442 indirect
->table_desc
.len
= sg_mapped
* sizeof(indirect
->desc_list
[0]);
443 memcpy(indirect
->desc_list
, evt_struct
->ext_list
,
444 MAX_INDIRECT_BUFS
* sizeof(struct srp_direct_buf
));
449 * map_data_for_srp_cmd: - Calls functions to map data for srp cmds
450 * @cmd: struct scsi_cmnd with the memory to be mapped
451 * @srp_cmd: srp_cmd that contains the memory descriptor
452 * @dev: dma device for which to map dma memory
454 * Called by scsi_cmd_to_srp_cmd() when converting scsi cmds to srp cmds
455 * Returns 1 on success.
457 static int map_data_for_srp_cmd(struct scsi_cmnd
*cmd
,
458 struct srp_event_struct
*evt_struct
,
459 struct srp_cmd
*srp_cmd
, struct device
*dev
)
461 switch (cmd
->sc_data_direction
) {
462 case DMA_FROM_DEVICE
:
467 case DMA_BIDIRECTIONAL
:
468 sdev_printk(KERN_ERR
, cmd
->device
,
469 "Can't map DMA_BIDIRECTIONAL to read/write\n");
472 sdev_printk(KERN_ERR
, cmd
->device
,
473 "Unknown data direction 0x%02x; can't map!\n",
474 cmd
->sc_data_direction
);
478 return map_sg_data(cmd
, evt_struct
, srp_cmd
, dev
);
482 * purge_requests: Our virtual adapter just shut down. purge any sent requests
483 * @hostdata: the adapter
485 static void purge_requests(struct ibmvscsi_host_data
*hostdata
, int error_code
)
487 struct srp_event_struct
*tmp_evt
, *pos
;
490 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
491 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
492 list_del(&tmp_evt
->list
);
493 del_timer(&tmp_evt
->timer
);
495 tmp_evt
->cmnd
->result
= (error_code
<< 16);
496 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
,
498 tmp_evt
->hostdata
->dev
);
499 if (tmp_evt
->cmnd_done
)
500 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
501 } else if (tmp_evt
->done
)
502 tmp_evt
->done(tmp_evt
);
503 free_event_struct(&tmp_evt
->hostdata
->pool
, tmp_evt
);
505 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
509 * ibmvscsi_reset_host - Reset the connection to the server
510 * @hostdata: struct ibmvscsi_host_data to reset
512 static void ibmvscsi_reset_host(struct ibmvscsi_host_data
*hostdata
)
514 scsi_block_requests(hostdata
->host
);
515 atomic_set(&hostdata
->request_limit
, 0);
517 purge_requests(hostdata
, DID_ERROR
);
518 if ((ibmvscsi_ops
->reset_crq_queue(&hostdata
->queue
, hostdata
)) ||
519 (ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0)) ||
520 (vio_enable_interrupts(to_vio_dev(hostdata
->dev
)))) {
521 atomic_set(&hostdata
->request_limit
, -1);
522 dev_err(hostdata
->dev
, "error after reset\n");
525 scsi_unblock_requests(hostdata
->host
);
529 * ibmvscsi_timeout - Internal command timeout handler
530 * @evt_struct: struct srp_event_struct that timed out
532 * Called when an internally generated command times out
534 static void ibmvscsi_timeout(struct srp_event_struct
*evt_struct
)
536 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
538 dev_err(hostdata
->dev
, "Command timed out (%x). Resetting connection\n",
539 evt_struct
->iu
.srp
.cmd
.opcode
);
541 ibmvscsi_reset_host(hostdata
);
545 /* ------------------------------------------------------------
546 * Routines for sending and receiving SRPs
549 * ibmvscsi_send_srp_event: - Transforms event to u64 array and calls send_crq()
550 * @evt_struct: evt_struct to be sent
551 * @hostdata: ibmvscsi_host_data of host
552 * @timeout: timeout in seconds - 0 means do not time command
554 * Returns the value returned from ibmvscsi_send_crq(). (Zero for success)
555 * Note that this routine assumes that host_lock is held for synchronization
557 static int ibmvscsi_send_srp_event(struct srp_event_struct
*evt_struct
,
558 struct ibmvscsi_host_data
*hostdata
,
559 unsigned long timeout
)
561 u64
*crq_as_u64
= (u64
*) &evt_struct
->crq
;
562 int request_status
= 0;
565 /* If we have exhausted our request limit, just fail this request,
566 * unless it is for a reset or abort.
567 * Note that there are rare cases involving driver generated requests
568 * (such as task management requests) that the mid layer may think we
569 * can handle more requests (can_queue) when we actually can't
571 if (evt_struct
->crq
.format
== VIOSRP_SRP_FORMAT
) {
573 atomic_dec_if_positive(&hostdata
->request_limit
);
574 /* If request limit was -1 when we started, it is now even
577 if (request_status
< -1)
579 /* Otherwise, we may have run out of requests. */
580 /* If request limit was 0 when we started the adapter is in the
581 * process of performing a login with the server adapter, or
582 * we may have run out of requests.
584 else if (request_status
== -1 &&
585 evt_struct
->iu
.srp
.login_req
.opcode
!= SRP_LOGIN_REQ
)
587 /* Abort and reset calls should make it through.
588 * Nothing except abort and reset should use the last two
589 * slots unless we had two or less to begin with.
591 else if (request_status
< 2 &&
592 evt_struct
->iu
.srp
.cmd
.opcode
!= SRP_TSK_MGMT
) {
593 /* In the case that we have less than two requests
594 * available, check the server limit as a combination
595 * of the request limit and the number of requests
596 * in-flight (the size of the send list). If the
597 * server limit is greater than 2, return busy so
598 * that the last two are reserved for reset and abort.
600 int server_limit
= request_status
;
601 struct srp_event_struct
*tmp_evt
;
603 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
607 if (server_limit
> 2)
612 /* Copy the IU into the transfer area */
613 *evt_struct
->xfer_iu
= evt_struct
->iu
;
614 evt_struct
->xfer_iu
->srp
.rsp
.tag
= (u64
)evt_struct
;
616 /* Add this to the sent list. We need to do this
617 * before we actually send
618 * in case it comes back REALLY fast
620 list_add_tail(&evt_struct
->list
, &hostdata
->sent
);
622 init_timer(&evt_struct
->timer
);
624 evt_struct
->timer
.data
= (unsigned long) evt_struct
;
625 evt_struct
->timer
.expires
= jiffies
+ (timeout
* HZ
);
626 evt_struct
->timer
.function
= (void (*)(unsigned long))ibmvscsi_timeout
;
627 add_timer(&evt_struct
->timer
);
631 ibmvscsi_ops
->send_crq(hostdata
, crq_as_u64
[0], crq_as_u64
[1])) != 0) {
632 list_del(&evt_struct
->list
);
633 del_timer(&evt_struct
->timer
);
635 /* If send_crq returns H_CLOSED, return SCSI_MLQUEUE_HOST_BUSY.
636 * Firmware will send a CRQ with a transport event (0xFF) to
637 * tell this client what has happened to the transport. This
638 * will be handled in ibmvscsi_handle_crq()
640 if (rc
== H_CLOSED
) {
641 dev_warn(hostdata
->dev
, "send warning. "
642 "Receive queue closed, will retry.\n");
645 dev_err(hostdata
->dev
, "send error %d\n", rc
);
646 atomic_inc(&hostdata
->request_limit
);
653 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
655 free_event_struct(&hostdata
->pool
, evt_struct
);
656 if (request_status
!= -1)
657 atomic_inc(&hostdata
->request_limit
);
658 return SCSI_MLQUEUE_HOST_BUSY
;
661 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
663 if (evt_struct
->cmnd
!= NULL
) {
664 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
665 evt_struct
->cmnd_done(evt_struct
->cmnd
);
666 } else if (evt_struct
->done
)
667 evt_struct
->done(evt_struct
);
669 free_event_struct(&hostdata
->pool
, evt_struct
);
674 * handle_cmd_rsp: - Handle responses from commands
675 * @evt_struct: srp_event_struct to be handled
677 * Used as a callback by when sending scsi cmds.
678 * Gets called by ibmvscsi_handle_crq()
680 static void handle_cmd_rsp(struct srp_event_struct
*evt_struct
)
682 struct srp_rsp
*rsp
= &evt_struct
->xfer_iu
->srp
.rsp
;
683 struct scsi_cmnd
*cmnd
= evt_struct
->cmnd
;
685 if (unlikely(rsp
->opcode
!= SRP_RSP
)) {
686 if (printk_ratelimit())
687 dev_warn(evt_struct
->hostdata
->dev
,
688 "bad SRP RSP type %d\n", rsp
->opcode
);
692 cmnd
->result
|= rsp
->status
;
693 if (((cmnd
->result
>> 1) & 0x1f) == CHECK_CONDITION
)
694 memcpy(cmnd
->sense_buffer
,
696 rsp
->sense_data_len
);
697 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
,
699 evt_struct
->hostdata
->dev
);
701 if (rsp
->flags
& SRP_RSP_FLAG_DOOVER
)
702 scsi_set_resid(cmnd
, rsp
->data_out_res_cnt
);
703 else if (rsp
->flags
& SRP_RSP_FLAG_DIOVER
)
704 scsi_set_resid(cmnd
, rsp
->data_in_res_cnt
);
707 if (evt_struct
->cmnd_done
)
708 evt_struct
->cmnd_done(cmnd
);
712 * lun_from_dev: - Returns the lun of the scsi device
713 * @dev: struct scsi_device
716 static inline u16
lun_from_dev(struct scsi_device
*dev
)
718 return (0x2 << 14) | (dev
->id
<< 8) | (dev
->channel
<< 5) | dev
->lun
;
722 * ibmvscsi_queue: - The queuecommand function of the scsi template
723 * @cmd: struct scsi_cmnd to be executed
724 * @done: Callback function to be called when cmd is completed
726 static int ibmvscsi_queuecommand(struct scsi_cmnd
*cmnd
,
727 void (*done
) (struct scsi_cmnd
*))
729 struct srp_cmd
*srp_cmd
;
730 struct srp_event_struct
*evt_struct
;
731 struct srp_indirect_buf
*indirect
;
732 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmnd
->device
->host
);
733 u16 lun
= lun_from_dev(cmnd
->device
);
736 cmnd
->result
= (DID_OK
<< 16);
737 evt_struct
= get_event_struct(&hostdata
->pool
);
739 return SCSI_MLQUEUE_HOST_BUSY
;
741 /* Set up the actual SRP IU */
742 srp_cmd
= &evt_struct
->iu
.srp
.cmd
;
743 memset(srp_cmd
, 0x00, SRP_MAX_IU_LEN
);
744 srp_cmd
->opcode
= SRP_CMD
;
745 memcpy(srp_cmd
->cdb
, cmnd
->cmnd
, sizeof(srp_cmd
->cdb
));
746 srp_cmd
->lun
= ((u64
) lun
) << 48;
748 if (!map_data_for_srp_cmd(cmnd
, evt_struct
, srp_cmd
, hostdata
->dev
)) {
749 if (!firmware_has_feature(FW_FEATURE_CMO
))
750 sdev_printk(KERN_ERR
, cmnd
->device
,
751 "couldn't convert cmd to srp_cmd\n");
752 free_event_struct(&hostdata
->pool
, evt_struct
);
753 return SCSI_MLQUEUE_HOST_BUSY
;
756 init_event_struct(evt_struct
,
759 cmnd
->timeout_per_command
/HZ
);
761 evt_struct
->cmnd
= cmnd
;
762 evt_struct
->cmnd_done
= done
;
764 /* Fix up dma address of the buffer itself */
765 indirect
= (struct srp_indirect_buf
*) srp_cmd
->add_data
;
766 out_fmt
= srp_cmd
->buf_fmt
>> 4;
767 in_fmt
= srp_cmd
->buf_fmt
& ((1U << 4) - 1);
768 if ((in_fmt
== SRP_DATA_DESC_INDIRECT
||
769 out_fmt
== SRP_DATA_DESC_INDIRECT
) &&
770 indirect
->table_desc
.va
== 0) {
771 indirect
->table_desc
.va
= evt_struct
->crq
.IU_data_ptr
+
772 offsetof(struct srp_cmd
, add_data
) +
773 offsetof(struct srp_indirect_buf
, desc_list
);
776 return ibmvscsi_send_srp_event(evt_struct
, hostdata
, 0);
779 /* ------------------------------------------------------------
780 * Routines for driver initialization
783 * adapter_info_rsp: - Handle response to MAD adapter info request
784 * @evt_struct: srp_event_struct with the response
786 * Used as a "done" callback by when sending adapter_info. Gets called
787 * by ibmvscsi_handle_crq()
789 static void adapter_info_rsp(struct srp_event_struct
*evt_struct
)
791 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
792 dma_unmap_single(hostdata
->dev
,
793 evt_struct
->iu
.mad
.adapter_info
.buffer
,
794 evt_struct
->iu
.mad
.adapter_info
.common
.length
,
797 if (evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
) {
798 dev_err(hostdata
->dev
, "error %d getting adapter info\n",
799 evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
);
801 dev_info(hostdata
->dev
, "host srp version: %s, "
802 "host partition %s (%d), OS %d, max io %u\n",
803 hostdata
->madapter_info
.srp_version
,
804 hostdata
->madapter_info
.partition_name
,
805 hostdata
->madapter_info
.partition_number
,
806 hostdata
->madapter_info
.os_type
,
807 hostdata
->madapter_info
.port_max_txu
[0]);
809 if (hostdata
->madapter_info
.port_max_txu
[0])
810 hostdata
->host
->max_sectors
=
811 hostdata
->madapter_info
.port_max_txu
[0] >> 9;
813 if (hostdata
->madapter_info
.os_type
== 3 &&
814 strcmp(hostdata
->madapter_info
.srp_version
, "1.6a") <= 0) {
815 dev_err(hostdata
->dev
, "host (Ver. %s) doesn't support large transfers\n",
816 hostdata
->madapter_info
.srp_version
);
817 dev_err(hostdata
->dev
, "limiting scatterlists to %d\n",
819 hostdata
->host
->sg_tablesize
= MAX_INDIRECT_BUFS
;
825 * send_mad_adapter_info: - Sends the mad adapter info request
826 * and stores the result so it can be retrieved with
827 * sysfs. We COULD consider causing a failure if the
828 * returned SRP version doesn't match ours.
829 * @hostdata: ibmvscsi_host_data of host
831 * Returns zero if successful.
833 static void send_mad_adapter_info(struct ibmvscsi_host_data
*hostdata
)
835 struct viosrp_adapter_info
*req
;
836 struct srp_event_struct
*evt_struct
;
840 evt_struct
= get_event_struct(&hostdata
->pool
);
842 dev_err(hostdata
->dev
,
843 "couldn't allocate an event for ADAPTER_INFO_REQ!\n");
847 init_event_struct(evt_struct
,
852 req
= &evt_struct
->iu
.mad
.adapter_info
;
853 memset(req
, 0x00, sizeof(*req
));
855 req
->common
.type
= VIOSRP_ADAPTER_INFO_TYPE
;
856 req
->common
.length
= sizeof(hostdata
->madapter_info
);
857 req
->buffer
= addr
= dma_map_single(hostdata
->dev
,
858 &hostdata
->madapter_info
,
859 sizeof(hostdata
->madapter_info
),
862 if (dma_mapping_error(hostdata
->dev
, req
->buffer
)) {
863 if (!firmware_has_feature(FW_FEATURE_CMO
))
864 dev_err(hostdata
->dev
,
865 "Unable to map request_buffer for "
867 free_event_struct(&hostdata
->pool
, evt_struct
);
871 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
872 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2)) {
873 dev_err(hostdata
->dev
, "couldn't send ADAPTER_INFO_REQ!\n");
874 dma_unmap_single(hostdata
->dev
,
876 sizeof(hostdata
->madapter_info
),
879 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
883 * login_rsp: - Handle response to SRP login request
884 * @evt_struct: srp_event_struct with the response
886 * Used as a "done" callback by when sending srp_login. Gets called
887 * by ibmvscsi_handle_crq()
889 static void login_rsp(struct srp_event_struct
*evt_struct
)
891 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
892 switch (evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
) {
893 case SRP_LOGIN_RSP
: /* it worked! */
895 case SRP_LOGIN_REJ
: /* refused! */
896 dev_info(hostdata
->dev
, "SRP_LOGIN_REJ reason %u\n",
897 evt_struct
->xfer_iu
->srp
.login_rej
.reason
);
899 atomic_set(&hostdata
->request_limit
, -1);
902 dev_err(hostdata
->dev
, "Invalid login response typecode 0x%02x!\n",
903 evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
);
905 atomic_set(&hostdata
->request_limit
, -1);
909 dev_info(hostdata
->dev
, "SRP_LOGIN succeeded\n");
911 if (evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
< 0)
912 dev_err(hostdata
->dev
, "Invalid request_limit.\n");
914 /* Now we know what the real request-limit is.
915 * This value is set rather than added to request_limit because
916 * request_limit could have been set to -1 by this client.
918 atomic_set(&hostdata
->request_limit
,
919 evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
);
921 /* If we had any pending I/Os, kick them */
922 scsi_unblock_requests(hostdata
->host
);
924 send_mad_adapter_info(hostdata
);
929 * send_srp_login: - Sends the srp login
930 * @hostdata: ibmvscsi_host_data of host
932 * Returns zero if successful.
934 static int send_srp_login(struct ibmvscsi_host_data
*hostdata
)
938 struct srp_login_req
*login
;
939 struct srp_event_struct
*evt_struct
= get_event_struct(&hostdata
->pool
);
941 dev_err(hostdata
->dev
, "couldn't allocate an event for login req!\n");
945 init_event_struct(evt_struct
,
950 login
= &evt_struct
->iu
.srp
.login_req
;
951 memset(login
, 0x00, sizeof(struct srp_login_req
));
952 login
->opcode
= SRP_LOGIN_REQ
;
953 login
->req_it_iu_len
= sizeof(union srp_iu
);
954 login
->req_buf_fmt
= SRP_BUF_FORMAT_DIRECT
| SRP_BUF_FORMAT_INDIRECT
;
956 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
957 /* Start out with a request limit of 0, since this is negotiated in
958 * the login request we are just sending and login requests always
959 * get sent by the driver regardless of request_limit.
961 atomic_set(&hostdata
->request_limit
, 0);
963 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2);
964 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
965 dev_info(hostdata
->dev
, "sent SRP login\n");
970 * sync_completion: Signal that a synchronous command has completed
971 * Note that after returning from this call, the evt_struct is freed.
972 * the caller waiting on this completion shouldn't touch the evt_struct
975 static void sync_completion(struct srp_event_struct
*evt_struct
)
977 /* copy the response back */
978 if (evt_struct
->sync_srp
)
979 *evt_struct
->sync_srp
= *evt_struct
->xfer_iu
;
981 complete(&evt_struct
->comp
);
985 * ibmvscsi_abort: Abort a command...from scsi host template
986 * send this over to the server and wait synchronously for the response
988 static int ibmvscsi_eh_abort_handler(struct scsi_cmnd
*cmd
)
990 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
991 struct srp_tsk_mgmt
*tsk_mgmt
;
992 struct srp_event_struct
*evt
;
993 struct srp_event_struct
*tmp_evt
, *found_evt
;
994 union viosrp_iu srp_rsp
;
997 u16 lun
= lun_from_dev(cmd
->device
);
998 unsigned long wait_switch
= 0;
1000 /* First, find this command in our sent list so we can figure
1001 * out the correct tag
1003 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1004 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1007 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1008 if (tmp_evt
->cmnd
== cmd
) {
1009 found_evt
= tmp_evt
;
1015 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1019 evt
= get_event_struct(&hostdata
->pool
);
1021 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1022 sdev_printk(KERN_ERR
, cmd
->device
,
1023 "failed to allocate abort event\n");
1027 init_event_struct(evt
,
1032 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1034 /* Set up an abort SRP command */
1035 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1036 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1037 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1038 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_ABORT_TASK
;
1039 tsk_mgmt
->task_tag
= (u64
) found_evt
;
1041 evt
->sync_srp
= &srp_rsp
;
1043 init_completion(&evt
->comp
);
1044 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, init_timeout
* 2);
1046 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1049 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1051 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1052 } while (time_before(jiffies
, wait_switch
));
1054 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1057 sdev_printk(KERN_ERR
, cmd
->device
,
1058 "failed to send abort() event. rc=%d\n", rsp_rc
);
1062 sdev_printk(KERN_INFO
, cmd
->device
,
1063 "aborting command. lun 0x%lx, tag 0x%lx\n",
1064 (((u64
) lun
) << 48), (u64
) found_evt
);
1066 wait_for_completion(&evt
->comp
);
1068 /* make sure we got a good response */
1069 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1070 if (printk_ratelimit())
1071 sdev_printk(KERN_WARNING
, cmd
->device
, "abort bad SRP RSP type %d\n",
1072 srp_rsp
.srp
.rsp
.opcode
);
1076 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1077 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1079 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1082 if (printk_ratelimit())
1083 sdev_printk(KERN_WARNING
, cmd
->device
,
1084 "abort code %d for task tag 0x%lx\n",
1085 rsp_rc
, tsk_mgmt
->task_tag
);
1089 /* Because we dropped the spinlock above, it's possible
1090 * The event is no longer in our list. Make sure it didn't
1091 * complete while we were aborting
1093 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1095 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1096 if (tmp_evt
->cmnd
== cmd
) {
1097 found_evt
= tmp_evt
;
1102 if (found_evt
== NULL
) {
1103 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1104 sdev_printk(KERN_INFO
, cmd
->device
, "aborted task tag 0x%lx completed\n",
1105 tsk_mgmt
->task_tag
);
1109 sdev_printk(KERN_INFO
, cmd
->device
, "successfully aborted task tag 0x%lx\n",
1110 tsk_mgmt
->task_tag
);
1112 cmd
->result
= (DID_ABORT
<< 16);
1113 list_del(&found_evt
->list
);
1114 unmap_cmd_data(&found_evt
->iu
.srp
.cmd
, found_evt
,
1115 found_evt
->hostdata
->dev
);
1116 free_event_struct(&found_evt
->hostdata
->pool
, found_evt
);
1117 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1118 atomic_inc(&hostdata
->request_limit
);
1123 * ibmvscsi_eh_device_reset_handler: Reset a single LUN...from scsi host
1124 * template send this over to the server and wait synchronously for the
1127 static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd
*cmd
)
1129 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1130 struct srp_tsk_mgmt
*tsk_mgmt
;
1131 struct srp_event_struct
*evt
;
1132 struct srp_event_struct
*tmp_evt
, *pos
;
1133 union viosrp_iu srp_rsp
;
1135 unsigned long flags
;
1136 u16 lun
= lun_from_dev(cmd
->device
);
1137 unsigned long wait_switch
= 0;
1139 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1140 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1142 evt
= get_event_struct(&hostdata
->pool
);
1144 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1145 sdev_printk(KERN_ERR
, cmd
->device
,
1146 "failed to allocate reset event\n");
1150 init_event_struct(evt
,
1155 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1157 /* Set up a lun reset SRP command */
1158 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1159 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1160 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1161 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_LUN_RESET
;
1163 evt
->sync_srp
= &srp_rsp
;
1165 init_completion(&evt
->comp
);
1166 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, init_timeout
* 2);
1168 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1171 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1173 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1174 } while (time_before(jiffies
, wait_switch
));
1176 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1179 sdev_printk(KERN_ERR
, cmd
->device
,
1180 "failed to send reset event. rc=%d\n", rsp_rc
);
1184 sdev_printk(KERN_INFO
, cmd
->device
, "resetting device. lun 0x%lx\n",
1185 (((u64
) lun
) << 48));
1187 wait_for_completion(&evt
->comp
);
1189 /* make sure we got a good response */
1190 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1191 if (printk_ratelimit())
1192 sdev_printk(KERN_WARNING
, cmd
->device
, "reset bad SRP RSP type %d\n",
1193 srp_rsp
.srp
.rsp
.opcode
);
1197 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1198 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1200 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1203 if (printk_ratelimit())
1204 sdev_printk(KERN_WARNING
, cmd
->device
,
1205 "reset code %d for task tag 0x%lx\n",
1206 rsp_rc
, tsk_mgmt
->task_tag
);
1210 /* We need to find all commands for this LUN that have not yet been
1211 * responded to, and fail them with DID_RESET
1213 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1214 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
1215 if ((tmp_evt
->cmnd
) && (tmp_evt
->cmnd
->device
== cmd
->device
)) {
1217 tmp_evt
->cmnd
->result
= (DID_RESET
<< 16);
1218 list_del(&tmp_evt
->list
);
1219 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
, tmp_evt
,
1220 tmp_evt
->hostdata
->dev
);
1221 free_event_struct(&tmp_evt
->hostdata
->pool
,
1223 atomic_inc(&hostdata
->request_limit
);
1224 if (tmp_evt
->cmnd_done
)
1225 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
1226 else if (tmp_evt
->done
)
1227 tmp_evt
->done(tmp_evt
);
1230 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1235 * ibmvscsi_eh_host_reset_handler - Reset the connection to the server
1236 * @cmd: struct scsi_cmnd having problems
1238 static int ibmvscsi_eh_host_reset_handler(struct scsi_cmnd
*cmd
)
1240 unsigned long wait_switch
= 0;
1241 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1243 dev_err(hostdata
->dev
, "Resetting connection due to error recovery\n");
1245 ibmvscsi_reset_host(hostdata
);
1247 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1248 time_before(jiffies
, wait_switch
) &&
1249 atomic_read(&hostdata
->request_limit
) < 2;) {
1254 if (atomic_read(&hostdata
->request_limit
) <= 0)
1261 * ibmvscsi_handle_crq: - Handles and frees received events in the CRQ
1262 * @crq: Command/Response queue
1263 * @hostdata: ibmvscsi_host_data of host
1266 void ibmvscsi_handle_crq(struct viosrp_crq
*crq
,
1267 struct ibmvscsi_host_data
*hostdata
)
1270 unsigned long flags
;
1271 struct srp_event_struct
*evt_struct
=
1272 (struct srp_event_struct
*)crq
->IU_data_ptr
;
1273 switch (crq
->valid
) {
1274 case 0xC0: /* initialization */
1275 switch (crq
->format
) {
1276 case 0x01: /* Initialization message */
1277 dev_info(hostdata
->dev
, "partner initialized\n");
1278 /* Send back a response */
1279 if ((rc
= ibmvscsi_ops
->send_crq(hostdata
,
1280 0xC002000000000000LL
, 0)) == 0) {
1282 send_srp_login(hostdata
);
1284 dev_err(hostdata
->dev
, "Unable to send init rsp. rc=%ld\n", rc
);
1288 case 0x02: /* Initialization response */
1289 dev_info(hostdata
->dev
, "partner initialization complete\n");
1292 send_srp_login(hostdata
);
1295 dev_err(hostdata
->dev
, "unknown crq message type: %d\n", crq
->format
);
1298 case 0xFF: /* Hypervisor telling us the connection is closed */
1299 scsi_block_requests(hostdata
->host
);
1300 atomic_set(&hostdata
->request_limit
, 0);
1301 if (crq
->format
== 0x06) {
1302 /* We need to re-setup the interpartition connection */
1303 dev_info(hostdata
->dev
, "Re-enabling adapter!\n");
1304 purge_requests(hostdata
, DID_REQUEUE
);
1305 if ((ibmvscsi_ops
->reenable_crq_queue(&hostdata
->queue
,
1307 (ibmvscsi_ops
->send_crq(hostdata
,
1308 0xC001000000000000LL
, 0))) {
1309 atomic_set(&hostdata
->request_limit
,
1311 dev_err(hostdata
->dev
, "error after enable\n");
1314 dev_err(hostdata
->dev
, "Virtual adapter failed rc %d!\n",
1317 purge_requests(hostdata
, DID_ERROR
);
1318 if ((ibmvscsi_ops
->reset_crq_queue(&hostdata
->queue
,
1320 (ibmvscsi_ops
->send_crq(hostdata
,
1321 0xC001000000000000LL
, 0))) {
1322 atomic_set(&hostdata
->request_limit
,
1324 dev_err(hostdata
->dev
, "error after reset\n");
1327 scsi_unblock_requests(hostdata
->host
);
1329 case 0x80: /* real payload */
1332 dev_err(hostdata
->dev
, "got an invalid message type 0x%02x\n",
1337 /* The only kind of payload CRQs we should get are responses to
1338 * things we send. Make sure this response is to something we
1341 if (!valid_event_struct(&hostdata
->pool
, evt_struct
)) {
1342 dev_err(hostdata
->dev
, "returned correlation_token 0x%p is invalid!\n",
1343 (void *)crq
->IU_data_ptr
);
1347 if (atomic_read(&evt_struct
->free
)) {
1348 dev_err(hostdata
->dev
, "received duplicate correlation_token 0x%p!\n",
1349 (void *)crq
->IU_data_ptr
);
1353 if (crq
->format
== VIOSRP_SRP_FORMAT
)
1354 atomic_add(evt_struct
->xfer_iu
->srp
.rsp
.req_lim_delta
,
1355 &hostdata
->request_limit
);
1357 del_timer(&evt_struct
->timer
);
1359 if ((crq
->status
!= VIOSRP_OK
&& crq
->status
!= VIOSRP_OK2
) && evt_struct
->cmnd
)
1360 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
1361 if (evt_struct
->done
)
1362 evt_struct
->done(evt_struct
);
1364 dev_err(hostdata
->dev
, "returned done() is NULL; not running it!\n");
1367 * Lock the host_lock before messing with these structures, since we
1368 * are running in a task context
1370 spin_lock_irqsave(evt_struct
->hostdata
->host
->host_lock
, flags
);
1371 list_del(&evt_struct
->list
);
1372 free_event_struct(&evt_struct
->hostdata
->pool
, evt_struct
);
1373 spin_unlock_irqrestore(evt_struct
->hostdata
->host
->host_lock
, flags
);
1377 * ibmvscsi_get_host_config: Send the command to the server to get host
1378 * configuration data. The data is opaque to us.
1380 static int ibmvscsi_do_host_config(struct ibmvscsi_host_data
*hostdata
,
1381 unsigned char *buffer
, int length
)
1383 struct viosrp_host_config
*host_config
;
1384 struct srp_event_struct
*evt_struct
;
1385 unsigned long flags
;
1389 evt_struct
= get_event_struct(&hostdata
->pool
);
1391 dev_err(hostdata
->dev
, "couldn't allocate event for HOST_CONFIG!\n");
1395 init_event_struct(evt_struct
,
1400 host_config
= &evt_struct
->iu
.mad
.host_config
;
1402 /* Set up a lun reset SRP command */
1403 memset(host_config
, 0x00, sizeof(*host_config
));
1404 host_config
->common
.type
= VIOSRP_HOST_CONFIG_TYPE
;
1405 host_config
->common
.length
= length
;
1406 host_config
->buffer
= addr
= dma_map_single(hostdata
->dev
, buffer
,
1410 if (dma_mapping_error(hostdata
->dev
, host_config
->buffer
)) {
1411 if (!firmware_has_feature(FW_FEATURE_CMO
))
1412 dev_err(hostdata
->dev
,
1413 "dma_mapping error getting host config\n");
1414 free_event_struct(&hostdata
->pool
, evt_struct
);
1418 init_completion(&evt_struct
->comp
);
1419 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1420 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2);
1421 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1423 wait_for_completion(&evt_struct
->comp
);
1424 dma_unmap_single(hostdata
->dev
, addr
, length
, DMA_BIDIRECTIONAL
);
1430 * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
1431 * @sdev: struct scsi_device device to configure
1433 * Enable allow_restart for a device if it is a disk. Adjust the
1434 * queue_depth here also as is required by the documentation for
1435 * struct scsi_host_template.
1437 static int ibmvscsi_slave_configure(struct scsi_device
*sdev
)
1439 struct Scsi_Host
*shost
= sdev
->host
;
1440 unsigned long lock_flags
= 0;
1442 spin_lock_irqsave(shost
->host_lock
, lock_flags
);
1443 if (sdev
->type
== TYPE_DISK
) {
1444 sdev
->allow_restart
= 1;
1445 sdev
->timeout
= 60 * HZ
;
1447 scsi_adjust_queue_depth(sdev
, 0, shost
->cmd_per_lun
);
1448 spin_unlock_irqrestore(shost
->host_lock
, lock_flags
);
1453 * ibmvscsi_change_queue_depth - Change the device's queue depth
1454 * @sdev: scsi device struct
1455 * @qdepth: depth to set
1460 static int ibmvscsi_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
1462 if (qdepth
> IBMVSCSI_MAX_CMDS_PER_LUN
)
1463 qdepth
= IBMVSCSI_MAX_CMDS_PER_LUN
;
1465 scsi_adjust_queue_depth(sdev
, 0, qdepth
);
1466 return sdev
->queue_depth
;
1469 /* ------------------------------------------------------------
1472 static ssize_t
show_host_srp_version(struct device
*dev
,
1473 struct device_attribute
*attr
, char *buf
)
1475 struct Scsi_Host
*shost
= class_to_shost(dev
);
1476 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1479 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1480 hostdata
->madapter_info
.srp_version
);
1484 static struct device_attribute ibmvscsi_host_srp_version
= {
1486 .name
= "srp_version",
1489 .show
= show_host_srp_version
,
1492 static ssize_t
show_host_partition_name(struct device
*dev
,
1493 struct device_attribute
*attr
,
1496 struct Scsi_Host
*shost
= class_to_shost(dev
);
1497 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1500 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1501 hostdata
->madapter_info
.partition_name
);
1505 static struct device_attribute ibmvscsi_host_partition_name
= {
1507 .name
= "partition_name",
1510 .show
= show_host_partition_name
,
1513 static ssize_t
show_host_partition_number(struct device
*dev
,
1514 struct device_attribute
*attr
,
1517 struct Scsi_Host
*shost
= class_to_shost(dev
);
1518 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1521 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1522 hostdata
->madapter_info
.partition_number
);
1526 static struct device_attribute ibmvscsi_host_partition_number
= {
1528 .name
= "partition_number",
1531 .show
= show_host_partition_number
,
1534 static ssize_t
show_host_mad_version(struct device
*dev
,
1535 struct device_attribute
*attr
, char *buf
)
1537 struct Scsi_Host
*shost
= class_to_shost(dev
);
1538 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1541 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1542 hostdata
->madapter_info
.mad_version
);
1546 static struct device_attribute ibmvscsi_host_mad_version
= {
1548 .name
= "mad_version",
1551 .show
= show_host_mad_version
,
1554 static ssize_t
show_host_os_type(struct device
*dev
,
1555 struct device_attribute
*attr
, char *buf
)
1557 struct Scsi_Host
*shost
= class_to_shost(dev
);
1558 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1561 len
= snprintf(buf
, PAGE_SIZE
, "%d\n", hostdata
->madapter_info
.os_type
);
1565 static struct device_attribute ibmvscsi_host_os_type
= {
1570 .show
= show_host_os_type
,
1573 static ssize_t
show_host_config(struct device
*dev
,
1574 struct device_attribute
*attr
, char *buf
)
1576 struct Scsi_Host
*shost
= class_to_shost(dev
);
1577 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1579 /* returns null-terminated host config data */
1580 if (ibmvscsi_do_host_config(hostdata
, buf
, PAGE_SIZE
) == 0)
1586 static struct device_attribute ibmvscsi_host_config
= {
1591 .show
= show_host_config
,
1594 static struct device_attribute
*ibmvscsi_attrs
[] = {
1595 &ibmvscsi_host_srp_version
,
1596 &ibmvscsi_host_partition_name
,
1597 &ibmvscsi_host_partition_number
,
1598 &ibmvscsi_host_mad_version
,
1599 &ibmvscsi_host_os_type
,
1600 &ibmvscsi_host_config
,
1604 /* ------------------------------------------------------------
1605 * SCSI driver registration
1607 static struct scsi_host_template driver_template
= {
1608 .module
= THIS_MODULE
,
1609 .name
= "IBM POWER Virtual SCSI Adapter " IBMVSCSI_VERSION
,
1610 .proc_name
= "ibmvscsi",
1611 .queuecommand
= ibmvscsi_queuecommand
,
1612 .eh_abort_handler
= ibmvscsi_eh_abort_handler
,
1613 .eh_device_reset_handler
= ibmvscsi_eh_device_reset_handler
,
1614 .eh_host_reset_handler
= ibmvscsi_eh_host_reset_handler
,
1615 .slave_configure
= ibmvscsi_slave_configure
,
1616 .change_queue_depth
= ibmvscsi_change_queue_depth
,
1617 .cmd_per_lun
= IBMVSCSI_CMDS_PER_LUN_DEFAULT
,
1618 .can_queue
= IBMVSCSI_MAX_REQUESTS_DEFAULT
,
1620 .sg_tablesize
= SG_ALL
,
1621 .use_clustering
= ENABLE_CLUSTERING
,
1622 .shost_attrs
= ibmvscsi_attrs
,
1626 * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
1628 * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
1631 * Number of bytes of IO data the driver will need to perform well.
1633 static unsigned long ibmvscsi_get_desired_dma(struct vio_dev
*vdev
)
1635 /* iu_storage data allocated in initialize_event_pool */
1636 unsigned long desired_io
= max_requests
* sizeof(union viosrp_iu
);
1638 /* add io space for sg data */
1639 desired_io
+= (IBMVSCSI_MAX_SECTORS_DEFAULT
*
1640 IBMVSCSI_CMDS_PER_LUN_DEFAULT
);
1646 * Called by bus code for each adapter
1648 static int ibmvscsi_probe(struct vio_dev
*vdev
, const struct vio_device_id
*id
)
1650 struct ibmvscsi_host_data
*hostdata
;
1651 struct Scsi_Host
*host
;
1652 struct device
*dev
= &vdev
->dev
;
1653 struct srp_rport_identifiers ids
;
1654 struct srp_rport
*rport
;
1655 unsigned long wait_switch
= 0;
1658 vdev
->dev
.driver_data
= NULL
;
1660 driver_template
.can_queue
= max_requests
;
1661 host
= scsi_host_alloc(&driver_template
, sizeof(*hostdata
));
1663 dev_err(&vdev
->dev
, "couldn't allocate host data\n");
1664 goto scsi_host_alloc_failed
;
1667 host
->transportt
= ibmvscsi_transport_template
;
1668 hostdata
= shost_priv(host
);
1669 memset(hostdata
, 0x00, sizeof(*hostdata
));
1670 INIT_LIST_HEAD(&hostdata
->sent
);
1671 hostdata
->host
= host
;
1672 hostdata
->dev
= dev
;
1673 atomic_set(&hostdata
->request_limit
, -1);
1674 hostdata
->host
->max_sectors
= IBMVSCSI_MAX_SECTORS_DEFAULT
;
1676 rc
= ibmvscsi_ops
->init_crq_queue(&hostdata
->queue
, hostdata
, max_requests
);
1677 if (rc
!= 0 && rc
!= H_RESOURCE
) {
1678 dev_err(&vdev
->dev
, "couldn't initialize crq. rc=%d\n", rc
);
1679 goto init_crq_failed
;
1681 if (initialize_event_pool(&hostdata
->pool
, max_requests
, hostdata
) != 0) {
1682 dev_err(&vdev
->dev
, "couldn't initialize event pool\n");
1683 goto init_pool_failed
;
1687 host
->max_id
= max_id
;
1688 host
->max_channel
= max_channel
;
1690 if (scsi_add_host(hostdata
->host
, hostdata
->dev
))
1691 goto add_host_failed
;
1693 /* we don't have a proper target_port_id so let's use the fake one */
1694 memcpy(ids
.port_id
, hostdata
->madapter_info
.partition_name
,
1695 sizeof(ids
.port_id
));
1696 ids
.roles
= SRP_RPORT_ROLE_TARGET
;
1697 rport
= srp_rport_add(host
, &ids
);
1699 goto add_srp_port_failed
;
1701 /* Try to send an initialization message. Note that this is allowed
1702 * to fail if the other end is not acive. In that case we don't
1705 if (ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0) == 0
1706 || rc
== H_RESOURCE
) {
1708 * Wait around max init_timeout secs for the adapter to finish
1709 * initializing. When we are done initializing, we will have a
1710 * valid request_limit. We don't want Linux scanning before
1713 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1714 time_before(jiffies
, wait_switch
) &&
1715 atomic_read(&hostdata
->request_limit
) < 2;) {
1720 /* if we now have a valid request_limit, initiate a scan */
1721 if (atomic_read(&hostdata
->request_limit
) > 0)
1722 scsi_scan_host(host
);
1725 vdev
->dev
.driver_data
= hostdata
;
1728 add_srp_port_failed
:
1729 scsi_remove_host(hostdata
->host
);
1731 release_event_pool(&hostdata
->pool
, hostdata
);
1733 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
, max_requests
);
1735 scsi_host_put(host
);
1736 scsi_host_alloc_failed
:
1740 static int ibmvscsi_remove(struct vio_dev
*vdev
)
1742 struct ibmvscsi_host_data
*hostdata
= vdev
->dev
.driver_data
;
1743 release_event_pool(&hostdata
->pool
, hostdata
);
1744 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
,
1747 srp_remove_host(hostdata
->host
);
1748 scsi_remove_host(hostdata
->host
);
1749 scsi_host_put(hostdata
->host
);
1755 * ibmvscsi_device_table: Used by vio.c to match devices in the device tree we
1758 static struct vio_device_id ibmvscsi_device_table
[] __devinitdata
= {
1759 {"vscsi", "IBM,v-scsi"},
1762 MODULE_DEVICE_TABLE(vio
, ibmvscsi_device_table
);
1764 static struct vio_driver ibmvscsi_driver
= {
1765 .id_table
= ibmvscsi_device_table
,
1766 .probe
= ibmvscsi_probe
,
1767 .remove
= ibmvscsi_remove
,
1768 .get_desired_dma
= ibmvscsi_get_desired_dma
,
1771 .owner
= THIS_MODULE
,
1775 static struct srp_function_template ibmvscsi_transport_functions
= {
1778 int __init
ibmvscsi_module_init(void)
1782 if (firmware_has_feature(FW_FEATURE_ISERIES
))
1783 ibmvscsi_ops
= &iseriesvscsi_ops
;
1784 else if (firmware_has_feature(FW_FEATURE_VIO
))
1785 ibmvscsi_ops
= &rpavscsi_ops
;
1789 ibmvscsi_transport_template
=
1790 srp_attach_transport(&ibmvscsi_transport_functions
);
1791 if (!ibmvscsi_transport_template
)
1794 ret
= vio_register_driver(&ibmvscsi_driver
);
1796 srp_release_transport(ibmvscsi_transport_template
);
1800 void __exit
ibmvscsi_module_exit(void)
1802 vio_unregister_driver(&ibmvscsi_driver
);
1803 srp_release_transport(ibmvscsi_transport_template
);
1806 module_init(ibmvscsi_module_init
);
1807 module_exit(ibmvscsi_module_exit
);