2 * Low-Level PCI Access for i386 machines
4 * Copyright 1993, 1994 Drew Eckhardt
6 * (Unix and Linux consulting and custom programming)
10 * Drew's work was sponsored by:
11 * iX Multiuser Multitasking Magazine
15 * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
17 * For more information, please consult the following manuals (look at
18 * http://www.pcisig.com/ for how to get them):
20 * PCI BIOS Specification
21 * PCI Local Bus Specification
22 * PCI to PCI Bridge Specification
23 * PCI System Design Guide
27 #include <linux/types.h>
28 #include <linux/kernel.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/ioport.h>
32 #include <linux/errno.h>
33 #include <linux/bootmem.h>
37 #include <asm/pci_x86.h>
38 #include <asm/io_apic.h>
42 skip_isa_ioresource_align(struct pci_dev
*dev
) {
44 if ((pci_probe
& PCI_CAN_SKIP_ISA_ALIGN
) &&
45 !(dev
->bus
->bridge_ctl
& PCI_BRIDGE_CTL_ISA
))
51 * We need to avoid collisions with `mirrored' VGA ports
52 * and other strange ISA hardware, so we always want the
53 * addresses to be allocated in the 0x000-0x0ff region
56 * Why? Because some silly external IO cards only decode
57 * the low 10 bits of the IO address. The 0x00-0xff region
58 * is reserved for motherboard devices that decode all 16
59 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
60 * but we want to try to avoid allocating at 0x2900-0x2bff
61 * which might have be mirrored at 0x0100-0x03ff..
64 pcibios_align_resource(void *data
, const struct resource
*res
,
65 resource_size_t size
, resource_size_t align
)
67 struct pci_dev
*dev
= data
;
68 resource_size_t start
= res
->start
;
70 if (res
->flags
& IORESOURCE_IO
) {
71 if (skip_isa_ioresource_align(dev
))
74 start
= (start
+ 0x3ff) & ~0x3ff;
78 EXPORT_SYMBOL(pcibios_align_resource
);
81 * Handle resources of PCI devices. If the world were perfect, we could
82 * just allocate all the resource regions and do nothing more. It isn't.
83 * On the other hand, we cannot just re-allocate all devices, as it would
84 * require us to know lots of host bridge internals. So we attempt to
85 * keep as much of the original configuration as possible, but tweak it
86 * when it's found to be wrong.
88 * Known BIOS problems we have to work around:
89 * - I/O or memory regions not configured
90 * - regions configured, but not enabled in the command register
91 * - bogus I/O addresses above 64K used
92 * - expansion ROMs left enabled (this may sound harmless, but given
93 * the fact the PCI specs explicitly allow address decoders to be
94 * shared between expansion ROMs and other resource regions, it's
96 * - bad resource sizes or overlaps with other regions
99 * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
100 * This gives us fixed barriers on where we can allocate.
101 * (2) Allocate resources for all enabled devices. If there is
102 * a collision, just mark the resource as unallocated. Also
103 * disable expansion ROMs during this step.
104 * (3) Try to allocate resources for disabled devices. If the
105 * resources were assigned correctly, everything goes well,
106 * if they weren't, they won't disturb allocation of other
108 * (4) Assign new addresses to resources which were either
109 * not configured at all or misconfigured. If explicitly
110 * requested by the user, configure expansion ROM address
114 static void __init
pcibios_allocate_bus_resources(struct list_head
*bus_list
)
121 /* Depth-First Search on bus tree */
122 list_for_each_entry(bus
, bus_list
, node
) {
123 if ((dev
= bus
->self
)) {
124 for (idx
= PCI_BRIDGE_RESOURCES
;
125 idx
< PCI_NUM_RESOURCES
; idx
++) {
126 r
= &dev
->resource
[idx
];
130 pci_claim_resource(dev
, idx
) < 0) {
132 * Something is wrong with the region.
133 * Invalidate the resource to prevent
134 * child resource allocations in this
137 r
->start
= r
->end
= 0;
142 pcibios_allocate_bus_resources(&bus
->children
);
146 struct pci_check_idx_range
{
151 static void __init
pcibios_allocate_resources(int pass
)
153 struct pci_dev
*dev
= NULL
;
154 int idx
, disabled
, i
;
158 struct pci_check_idx_range idx_range
[] = {
159 { PCI_STD_RESOURCES
, PCI_STD_RESOURCE_END
},
160 #ifdef CONFIG_PCI_IOV
161 { PCI_IOV_RESOURCES
, PCI_IOV_RESOURCE_END
},
165 for_each_pci_dev(dev
) {
166 pci_read_config_word(dev
, PCI_COMMAND
, &command
);
167 for (i
= 0; i
< ARRAY_SIZE(idx_range
); i
++)
168 for (idx
= idx_range
[i
].start
; idx
<= idx_range
[i
].end
; idx
++) {
169 r
= &dev
->resource
[idx
];
170 if (r
->parent
) /* Already allocated */
172 if (!r
->start
) /* Address not assigned at all */
174 if (r
->flags
& IORESOURCE_IO
)
175 disabled
= !(command
& PCI_COMMAND_IO
);
177 disabled
= !(command
& PCI_COMMAND_MEMORY
);
178 if (pass
== disabled
) {
180 "BAR %d: reserving %pr (d=%d, p=%d)\n",
181 idx
, r
, disabled
, pass
);
182 if (pci_claim_resource(dev
, idx
) < 0) {
183 /* We'll assign a new address later */
184 dev
->fw_addr
[idx
] = r
->start
;
191 r
= &dev
->resource
[PCI_ROM_RESOURCE
];
192 if (r
->flags
& IORESOURCE_ROM_ENABLE
) {
193 /* Turn the ROM off, leave the resource region,
194 * but keep it unregistered. */
196 dev_dbg(&dev
->dev
, "disabling ROM %pR\n", r
);
197 r
->flags
&= ~IORESOURCE_ROM_ENABLE
;
198 pci_read_config_dword(dev
,
199 dev
->rom_base_reg
, ®
);
200 pci_write_config_dword(dev
, dev
->rom_base_reg
,
201 reg
& ~PCI_ROM_ADDRESS_ENABLE
);
207 static int __init
pcibios_assign_resources(void)
209 struct pci_dev
*dev
= NULL
;
212 if (!(pci_probe
& PCI_ASSIGN_ROMS
)) {
214 * Try to use BIOS settings for ROMs, otherwise let
215 * pci_assign_unassigned_resources() allocate the new
218 for_each_pci_dev(dev
) {
219 r
= &dev
->resource
[PCI_ROM_RESOURCE
];
220 if (!r
->flags
|| !r
->start
)
222 if (pci_claim_resource(dev
, PCI_ROM_RESOURCE
) < 0) {
229 pci_assign_unassigned_resources();
234 void __init
pcibios_resource_survey(void)
236 DBG("PCI: Allocating resources\n");
237 pcibios_allocate_bus_resources(&pci_root_buses
);
238 pcibios_allocate_resources(0);
239 pcibios_allocate_resources(1);
241 e820_reserve_resources_late();
243 * Insert the IO APIC resources after PCI initialization has
244 * occurred to handle IO APICS that are mapped in on a BAR in
245 * PCI space, but before trying to assign unassigned pci res.
247 ioapic_insert_resources();
251 * called in fs_initcall (one below subsys_initcall),
252 * give a chance for motherboard reserve resources
254 fs_initcall(pcibios_assign_resources
);
257 * If we set up a device for bus mastering, we need to check the latency
258 * timer as certain crappy BIOSes forget to set it properly.
260 unsigned int pcibios_max_latency
= 255;
262 void pcibios_set_master(struct pci_dev
*dev
)
265 pci_read_config_byte(dev
, PCI_LATENCY_TIMER
, &lat
);
267 lat
= (64 <= pcibios_max_latency
) ? 64 : pcibios_max_latency
;
268 else if (lat
> pcibios_max_latency
)
269 lat
= pcibios_max_latency
;
272 dev_printk(KERN_DEBUG
, &dev
->dev
, "setting latency timer to %d\n", lat
);
273 pci_write_config_byte(dev
, PCI_LATENCY_TIMER
, lat
);
276 static const struct vm_operations_struct pci_mmap_ops
= {
277 .access
= generic_access_phys
,
280 int pci_mmap_page_range(struct pci_dev
*dev
, struct vm_area_struct
*vma
,
281 enum pci_mmap_state mmap_state
, int write_combine
)
285 /* I/O space cannot be accessed via normal processor loads and
286 * stores on this platform.
288 if (mmap_state
== pci_mmap_io
)
291 prot
= pgprot_val(vma
->vm_page_prot
);
294 * Return error if pat is not enabled and write_combine is requested.
295 * Caller can followup with UC MINUS request and add a WC mtrr if there
296 * is a free mtrr slot.
298 if (!pat_enabled
&& write_combine
)
301 if (pat_enabled
&& write_combine
)
302 prot
|= _PAGE_CACHE_WC
;
303 else if (pat_enabled
|| boot_cpu_data
.x86
> 3)
305 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
306 * To avoid attribute conflicts, request UC MINUS here
309 prot
|= _PAGE_CACHE_UC_MINUS
;
311 prot
|= _PAGE_IOMAP
; /* creating a mapping for IO */
313 vma
->vm_page_prot
= __pgprot(prot
);
315 if (io_remap_pfn_range(vma
, vma
->vm_start
, vma
->vm_pgoff
,
316 vma
->vm_end
- vma
->vm_start
,
320 vma
->vm_ops
= &pci_mmap_ops
;