?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Add linux-next specific files for 20110516
[linux-2.6/next.git] / drivers / staging / slicoss / slicoss.c
blob18f11039bb5f368a45bc4937b934aeab161eb5d4
1 /**************************************************************************
2 *
3 * Copyright 2000-2006 Alacritech, Inc. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above
12 * copyright notice, this list of conditions and the following
13 * disclaimer in the documentation and/or other materials provided
14 * with the distribution.
15 *
16 * Alternatively, this software may be distributed under the terms of the
17 * GNU General Public License ("GPL") version 2 as published by the Free
18 * Software Foundation.
19 *
20 * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
21 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
27 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
28 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
30 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 *
33 * The views and conclusions contained in the software and documentation
34 * are those of the authors and should not be interpreted as representing
35 * official policies, either expressed or implied, of Alacritech, Inc.
36 *
37 **************************************************************************/
38
39 /*
40 * FILENAME: slicoss.c
41 *
42 * The SLICOSS driver for Alacritech's IS-NIC products.
43 *
44 * This driver is supposed to support:
45 *
46 * Mojave cards (single port PCI Gigabit) both copper and fiber
47 * Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
48 * Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
49 *
50 * The driver was acutally tested on Oasis and Kalahari cards.
51 *
52 *
53 * NOTE: This is the standard, non-accelerated version of Alacritech's
54 * IS-NIC driver.
55 */
56
57
58 #define KLUDGE_FOR_4GB_BOUNDARY 1
59 #define DEBUG_MICROCODE 1
60 #define DBG 1
61 #define SLIC_INTERRUPT_PROCESS_LIMIT 1
62 #define SLIC_OFFLOAD_IP_CHECKSUM 1
63 #define STATS_TIMER_INTERVAL 2
64 #define PING_TIMER_INTERVAL 1
65
66 #include <linux/kernel.h>
67 #include <linux/string.h>
68 #include <linux/errno.h>
69 #include <linux/ioport.h>
70 #include <linux/slab.h>
71 #include <linux/interrupt.h>
72 #include <linux/timer.h>
73 #include <linux/pci.h>
74 #include <linux/spinlock.h>
75 #include <linux/init.h>
76 #include <linux/bitops.h>
77 #include <linux/io.h>
78 #include <linux/netdevice.h>
79 #include <linux/etherdevice.h>
80 #include <linux/skbuff.h>
81 #include <linux/delay.h>
82 #include <linux/debugfs.h>
83 #include <linux/seq_file.h>
84 #include <linux/kthread.h>
85 #include <linux/module.h>
86 #include <linux/moduleparam.h>
87
88 #include <linux/firmware.h>
89 #include <linux/types.h>
90 #include <linux/dma-mapping.h>
91 #include <linux/mii.h>
92 #include <linux/if_vlan.h>
93 #include <asm/unaligned.h>
94
95 #include <linux/ethtool.h>
96 #include <linux/uaccess.h>
97 #include "slichw.h"
98 #include "slic.h"
99
100 static uint slic_first_init = 1;
101 static char *slic_banner = "Alacritech SLIC Technology(tm) Server "\
102 "and Storage Accelerator (Non-Accelerated)";
103
104 static char *slic_proc_version = "2.0.351 2006/07/14 12:26:00";
105 static char *slic_product_name = "SLIC Technology(tm) Server "\
106 "and Storage Accelerator (Non-Accelerated)";
107 static char *slic_vendor = "Alacritech, Inc.";
108
109 static int slic_debug = 1;
110 static int debug = -1;
111 static struct net_device *head_netdevice;
112
113 static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
114 static int intagg_delay = 100;
115 static u32 dynamic_intagg;
116 static unsigned int rcv_count;
117 static struct dentry *slic_debugfs;
118
119 #define DRV_NAME "slicoss"
120 #define DRV_VERSION "2.0.1"
121 #define DRV_AUTHOR "Alacritech, Inc. Engineering"
122 #define DRV_DESCRIPTION "Alacritech SLIC Techonology(tm) "\
123 "Non-Accelerated Driver"
124 #define DRV_COPYRIGHT "Copyright 2000-2006 Alacritech, Inc. "\
125 "All rights reserved."
126 #define PFX DRV_NAME " "
127
128 MODULE_AUTHOR(DRV_AUTHOR);
129 MODULE_DESCRIPTION(DRV_DESCRIPTION);
130 MODULE_LICENSE("Dual BSD/GPL");
131
132 module_param(dynamic_intagg, int, 0);
133 MODULE_PARM_DESC(dynamic_intagg, "Dynamic Interrupt Aggregation Setting");
134 module_param(intagg_delay, int, 0);
135 MODULE_PARM_DESC(intagg_delay, "uSec Interrupt Aggregation Delay");
136
137 static DEFINE_PCI_DEVICE_TABLE(slic_pci_tbl) = {
138 { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_1GB_DEVICE_ID) },
139 { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_2GB_DEVICE_ID) },
140 { 0 }
141 };
142
143 MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
144
145 #ifdef ASSERT
146 #undef ASSERT
147 #endif
148
149 static void slic_assert_fail(void)
150 {
151 u32 cpuid;
152 u32 curr_pid;
153 cpuid = smp_processor_id();
154 curr_pid = current->pid;
155
156 printk(KERN_ERR "%s CPU # %d ---- PID # %d\n",
157 __func__, cpuid, curr_pid);
158 }
159
160 #ifndef ASSERT
161 #define ASSERT(a) do { \
162 if (!(a)) { \
163 printk(KERN_ERR "slicoss ASSERT() Failure: function %s" \
164 "line %d\n", __func__, __LINE__); \
165 slic_assert_fail(); \
166 } \
167 } while (0)
168 #endif
169
170
171 #define SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle) \
172 { \
173 spin_lock_irqsave(&_adapter->handle_lock.lock, \
174 _adapter->handle_lock.flags); \
175 _pslic_handle = _adapter->pfree_slic_handles; \
176 if (_pslic_handle) { \
177 ASSERT(_pslic_handle->type == SLIC_HANDLE_FREE); \
178 _adapter->pfree_slic_handles = _pslic_handle->next; \
179 } \
180 spin_unlock_irqrestore(&_adapter->handle_lock.lock, \
181 _adapter->handle_lock.flags); \
182 }
183
184 #define SLIC_FREE_SLIC_HANDLE(_adapter, _pslic_handle) \
185 { \
186 _pslic_handle->type = SLIC_HANDLE_FREE; \
187 spin_lock_irqsave(&_adapter->handle_lock.lock, \
188 _adapter->handle_lock.flags); \
189 _pslic_handle->next = _adapter->pfree_slic_handles; \
190 _adapter->pfree_slic_handles = _pslic_handle; \
191 spin_unlock_irqrestore(&_adapter->handle_lock.lock, \
192 _adapter->handle_lock.flags); \
193 }
194
195 static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
196 {
197 writel(value, reg);
198 if (flush)
199 mb();
200 }
201
202 static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
203 u32 value, void __iomem *regh, u32 paddrh,
204 bool flush)
205 {
206 spin_lock_irqsave(&adapter->bit64reglock.lock,
207 adapter->bit64reglock.flags);
208 if (paddrh != adapter->curaddrupper) {
209 adapter->curaddrupper = paddrh;
210 writel(paddrh, regh);
211 }
212 writel(value, reg);
213 if (flush)
214 mb();
215 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
216 adapter->bit64reglock.flags);
217 }
218
219 /*
220 * Functions to obtain the CRC corresponding to the destination mac address.
221 * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
222 * the polynomial:
223 * x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11 + x^10 + x^8 + x^7 + x^5 +
224 * x^4 + x^2 + x^1.
225 *
226 * After the CRC for the 6 bytes is generated (but before the value is
227 * complemented),
228 * we must then transpose the value and return bits 30-23.
229 *
230 */
231 static u32 slic_crc_table[256]; /* Table of CRCs for all possible byte values */
232 static u32 slic_crc_init; /* Is table initialized */
233
234 /*
235 * Contruct the CRC32 table
236 */
237 static void slic_mcast_init_crc32(void)
238 {
239 u32 c; /* CRC shit reg */
240 u32 e = 0; /* Poly X-or pattern */
241 int i; /* counter */
242 int k; /* byte being shifted into crc */
243
244 static int p[] = { 0, 1, 2, 4, 5, 7, 8, 10, 11, 12, 16, 22, 23, 26 };
245
246 for (i = 0; i < ARRAY_SIZE(p); i++)
247 e |= 1L << (31 - p[i]);
248
249 for (i = 1; i < 256; i++) {
250 c = i;
251 for (k = 8; k; k--)
252 c = c & 1 ? (c >> 1) ^ e : c >> 1;
253 slic_crc_table[i] = c;
254 }
255 }
256
257 /*
258 * Return the MAC hast as described above.
259 */
260 static unsigned char slic_mcast_get_mac_hash(char *macaddr)
261 {
262 u32 crc;
263 char *p;
264 int i;
265 unsigned char machash = 0;
266
267 if (!slic_crc_init) {
268 slic_mcast_init_crc32();
269 slic_crc_init = 1;
270 }
271
272 crc = 0xFFFFFFFF; /* Preload shift register, per crc-32 spec */
273 for (i = 0, p = macaddr; i < 6; ++p, ++i)
274 crc = (crc >> 8) ^ slic_crc_table[(crc ^ *p) & 0xFF];
275
276 /* Return bits 1-8, transposed */
277 for (i = 1; i < 9; i++)
278 machash |= (((crc >> i) & 1) << (8 - i));
279
280 return machash;
281 }
282
283 static void slic_mcast_set_bit(struct adapter *adapter, char *address)
284 {
285 unsigned char crcpoly;
286
287 /* Get the CRC polynomial for the mac address */
288 crcpoly = slic_mcast_get_mac_hash(address);
289
290 /* We only have space on the SLIC for 64 entries. Lop
291 * off the top two bits. (2^6 = 64)
292 */
293 crcpoly &= 0x3F;
294
295 /* OR in the new bit into our 64 bit mask. */
296 adapter->mcastmask |= (u64) 1 << crcpoly;
297 }
298
299 static void slic_mcast_set_mask(struct adapter *adapter)
300 {
301 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
302
303 if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
304 /* Turn on all multicast addresses. We have to do this for
305 * promiscuous mode as well as ALLMCAST mode. It saves the
306 * Microcode from having to keep state about the MAC
307 * configuration.
308 */
309 slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
310 slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
311 FLUSH);
312 } else {
313 /* Commit our multicast mast to the SLIC by writing to the
314 * multicast address mask registers
315 */
316 slic_reg32_write(&slic_regs->slic_mcastlow,
317 (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
318 slic_reg32_write(&slic_regs->slic_mcasthigh,
319 (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
320 }
321 }
322
323 static void slic_timer_ping(ulong dev)
324 {
325 struct adapter *adapter;
326 struct sliccard *card;
327
328 ASSERT(dev);
329 adapter = netdev_priv((struct net_device *)dev);
330 ASSERT(adapter);
331 card = adapter->card;
332 ASSERT(card);
333
334 adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
335 add_timer(&adapter->pingtimer);
336 }
337
338 static void slic_unmap_mmio_space(struct adapter *adapter)
339 {
340 if (adapter->slic_regs)
341 iounmap(adapter->slic_regs);
342 adapter->slic_regs = NULL;
343 }
344
345 /*
346 * slic_link_config
347 *
348 * Write phy control to configure link duplex/speed
349 *
350 */
351 static void slic_link_config(struct adapter *adapter,
352 u32 linkspeed, u32 linkduplex)
353 {
354 u32 __iomem *wphy;
355 u32 speed;
356 u32 duplex;
357 u32 phy_config;
358 u32 phy_advreg;
359 u32 phy_gctlreg;
360
361 if (adapter->state != ADAPT_UP)
362 return;
363
364 ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
365 || (adapter->devid == SLIC_2GB_DEVICE_ID));
366
367 if (linkspeed > LINK_1000MB)
368 linkspeed = LINK_AUTOSPEED;
369 if (linkduplex > LINK_AUTOD)
370 linkduplex = LINK_AUTOD;
371
372 wphy = &adapter->slic_regs->slic_wphy;
373
374 if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
375 if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
376 /* We've got a fiber gigabit interface, and register
377 * 4 is different in fiber mode than in copper mode
378 */
379
380 /* advertise FD only @1000 Mb */
381 phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
382 /* enable PAUSE frames */
383 phy_advreg |= PAR_ASYMPAUSE_FIBER;
384 slic_reg32_write(wphy, phy_advreg, FLUSH);
385
386 if (linkspeed == LINK_AUTOSPEED) {
387 /* reset phy, enable auto-neg */
388 phy_config =
389 (MIICR_REG_PCR |
390 (PCR_RESET | PCR_AUTONEG |
391 PCR_AUTONEG_RST));
392 slic_reg32_write(wphy, phy_config, FLUSH);
393 } else { /* forced 1000 Mb FD*/
394 /* power down phy to break link
395 this may not work) */
396 phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
397 slic_reg32_write(wphy, phy_config, FLUSH);
398 /* wait, Marvell says 1 sec,
399 try to get away with 10 ms */
400 mdelay(10);
401
402 /* disable auto-neg, set speed/duplex,
403 soft reset phy, powerup */
404 phy_config =
405 (MIICR_REG_PCR |
406 (PCR_RESET | PCR_SPEED_1000 |
407 PCR_DUPLEX_FULL));
408 slic_reg32_write(wphy, phy_config, FLUSH);
409 }
410 } else { /* copper gigabit */
411
412 /* Auto-Negotiate or 1000 Mb must be auto negotiated
413 * We've got a copper gigabit interface, and
414 * register 4 is different in copper mode than
415 * in fiber mode
416 */
417 if (linkspeed == LINK_AUTOSPEED) {
418 /* advertise 10/100 Mb modes */
419 phy_advreg =
420 (MIICR_REG_4 |
421 (PAR_ADV100FD | PAR_ADV100HD | PAR_ADV10FD
422 | PAR_ADV10HD));
423 } else {
424 /* linkspeed == LINK_1000MB -
425 don't advertise 10/100 Mb modes */
426 phy_advreg = MIICR_REG_4;
427 }
428 /* enable PAUSE frames */
429 phy_advreg |= PAR_ASYMPAUSE;
430 /* required by the Cicada PHY */
431 phy_advreg |= PAR_802_3;
432 slic_reg32_write(wphy, phy_advreg, FLUSH);
433 /* advertise FD only @1000 Mb */
434 phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
435 slic_reg32_write(wphy, phy_gctlreg, FLUSH);
436
437 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
438 /* if a Marvell PHY
439 enable auto crossover */
440 phy_config =
441 (MIICR_REG_16 | (MRV_REG16_XOVERON));
442 slic_reg32_write(wphy, phy_config, FLUSH);
443
444 /* reset phy, enable auto-neg */
445 phy_config =
446 (MIICR_REG_PCR |
447 (PCR_RESET | PCR_AUTONEG |
448 PCR_AUTONEG_RST));
449 slic_reg32_write(wphy, phy_config, FLUSH);
450 } else { /* it's a Cicada PHY */
451 /* enable and restart auto-neg (don't reset) */
452 phy_config =
453 (MIICR_REG_PCR |
454 (PCR_AUTONEG | PCR_AUTONEG_RST));
455 slic_reg32_write(wphy, phy_config, FLUSH);
456 }
457 }
458 } else {
459 /* Forced 10/100 */
460 if (linkspeed == LINK_10MB)
461 speed = 0;
462 else
463 speed = PCR_SPEED_100;
464 if (linkduplex == LINK_HALFD)
465 duplex = 0;
466 else
467 duplex = PCR_DUPLEX_FULL;
468
469 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
470 /* if a Marvell PHY
471 disable auto crossover */
472 phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
473 slic_reg32_write(wphy, phy_config, FLUSH);
474 }
475
476 /* power down phy to break link (this may not work) */
477 phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
478 slic_reg32_write(wphy, phy_config, FLUSH);
479
480 /* wait, Marvell says 1 sec, try to get away with 10 ms */
481 mdelay(10);
482
483 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
484 /* if a Marvell PHY
485 disable auto-neg, set speed,
486 soft reset phy, powerup */
487 phy_config =
488 (MIICR_REG_PCR | (PCR_RESET | speed | duplex));
489 slic_reg32_write(wphy, phy_config, FLUSH);
490 } else { /* it's a Cicada PHY */
491 /* disable auto-neg, set speed, powerup */
492 phy_config = (MIICR_REG_PCR | (speed | duplex));
493 slic_reg32_write(wphy, phy_config, FLUSH);
494 }
495 }
496 }
497
498 static int slic_card_download_gbrcv(struct adapter *adapter)
499 {
500 const struct firmware *fw;
501 const char *file = "";
502 int ret;
503 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
504 u32 codeaddr;
505 u32 instruction;
506 int index = 0;
507 u32 rcvucodelen = 0;
508
509 switch (adapter->devid) {
510 case SLIC_2GB_DEVICE_ID:
511 file = "slicoss/oasisrcvucode.sys";
512 break;
513 case SLIC_1GB_DEVICE_ID:
514 file = "slicoss/gbrcvucode.sys";
515 break;
516 default:
517 ASSERT(0);
518 break;
519 }
520
521 ret = request_firmware(&fw, file, &adapter->pcidev->dev);
522 if (ret) {
523 dev_err(&adapter->pcidev->dev,
524 "SLICOSS: Failed to load firmware %s\n", file);
525 return ret;
526 }
527
528 rcvucodelen = *(u32 *)(fw->data + index);
529 index += 4;
530 switch (adapter->devid) {
531 case SLIC_2GB_DEVICE_ID:
532 if (rcvucodelen != OasisRcvUCodeLen)
533 return -EINVAL;
534 break;
535 case SLIC_1GB_DEVICE_ID:
536 if (rcvucodelen != GBRcvUCodeLen)
537 return -EINVAL;
538 break;
539 default:
540 ASSERT(0);
541 break;
542 }
543 /* start download */
544 slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
545 /* download the rcv sequencer ucode */
546 for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
547 /* write out instruction address */
548 slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
549
550 instruction = *(u32 *)(fw->data + index);
551 index += 4;
552 /* write out the instruction data low addr */
553 slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
554
555 instruction = *(u8 *)(fw->data + index);
556 index++;
557 /* write out the instruction data high addr */
558 slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
559 FLUSH);
560 }
561
562 /* download finished */
563 release_firmware(fw);
564 slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
565 return 0;
566 }
567
568 MODULE_FIRMWARE("slicoss/oasisrcvucode.sys");
569 MODULE_FIRMWARE("slicoss/gbrcvucode.sys");
570
571 static int slic_card_download(struct adapter *adapter)
572 {
573 const struct firmware *fw;
574 const char *file = "";
575 int ret;
576 u32 section;
577 int thissectionsize;
578 int codeaddr;
579 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
580 u32 instruction;
581 u32 baseaddress;
582 u32 i;
583 u32 numsects = 0;
584 u32 sectsize[3];
585 u32 sectstart[3];
586 int ucode_start, index = 0;
587
588 switch (adapter->devid) {
589 case SLIC_2GB_DEVICE_ID:
590 file = "slicoss/oasisdownload.sys";
591 break;
592 case SLIC_1GB_DEVICE_ID:
593 file = "slicoss/gbdownload.sys";
594 break;
595 default:
596 ASSERT(0);
597 break;
598 }
599 ret = request_firmware(&fw, file, &adapter->pcidev->dev);
600 if (ret) {
601 dev_err(&adapter->pcidev->dev,
602 "SLICOSS: Failed to load firmware %s\n", file);
603 return ret;
604 }
605 numsects = *(u32 *)(fw->data + index);
606 index += 4;
607 ASSERT(numsects <= 3);
608 for (i = 0; i < numsects; i++) {
609 sectsize[i] = *(u32 *)(fw->data + index);
610 index += 4;
611 }
612 for (i = 0; i < numsects; i++) {
613 sectstart[i] = *(u32 *)(fw->data + index);
614 index += 4;
615 }
616 ucode_start = index;
617 instruction = *(u32 *)(fw->data + index);
618 index += 4;
619 for (section = 0; section < numsects; section++) {
620 baseaddress = sectstart[section];
621 thissectionsize = sectsize[section] >> 3;
622
623 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
624 /* Write out instruction address */
625 slic_reg32_write(&slic_regs->slic_wcs,
626 baseaddress + codeaddr, FLUSH);
627 /* Write out instruction to low addr */
628 slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
629 instruction = *(u32 *)(fw->data + index);
630 index += 4;
631
632 /* Write out instruction to high addr */
633 slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
634 instruction = *(u32 *)(fw->data + index);
635 index += 4;
636 }
637 }
638 index = ucode_start;
639 for (section = 0; section < numsects; section++) {
640 instruction = *(u32 *)(fw->data + index);
641 baseaddress = sectstart[section];
642 if (baseaddress < 0x8000)
643 continue;
644 thissectionsize = sectsize[section] >> 3;
645
646 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
647 /* Write out instruction address */
648 slic_reg32_write(&slic_regs->slic_wcs,
649 SLIC_WCS_COMPARE | (baseaddress + codeaddr),
650 FLUSH);
651 /* Write out instruction to low addr */
652 slic_reg32_write(&slic_regs->slic_wcs, instruction,
653 FLUSH);
654 instruction = *(u32 *)(fw->data + index);
655 index += 4;
656 /* Write out instruction to high addr */
657 slic_reg32_write(&slic_regs->slic_wcs, instruction,
658 FLUSH);
659 instruction = *(u32 *)(fw->data + index);
660 index += 4;
661
662 /* Check SRAM location zero. If it is non-zero. Abort.*/
663 /* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
664 if (failure) {
665 release_firmware(fw);
666 return -EIO;
667 }*/
668 }
669 }
670 release_firmware(fw);
671 /* Everything OK, kick off the card */
672 mdelay(10);
673 slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
674
675 /* stall for 20 ms, long enough for ucode to init card
676 and reach mainloop */
677 mdelay(20);
678
679 return 0;
680 }
681
682 MODULE_FIRMWARE("slicoss/oasisdownload.sys");
683 MODULE_FIRMWARE("slicoss/gbdownload.sys");
684
685 static void slic_adapter_set_hwaddr(struct adapter *adapter)
686 {
687 struct sliccard *card = adapter->card;
688
689 if ((adapter->card) && (card->config_set)) {
690 memcpy(adapter->macaddr,
691 card->config.MacInfo[adapter->functionnumber].macaddrA,
692 sizeof(struct slic_config_mac));
693 if (!(adapter->currmacaddr[0] || adapter->currmacaddr[1] ||
694 adapter->currmacaddr[2] || adapter->currmacaddr[3] ||
695 adapter->currmacaddr[4] || adapter->currmacaddr[5])) {
696 memcpy(adapter->currmacaddr, adapter->macaddr, 6);
697 }
698 if (adapter->netdev) {
699 memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
700 6);
701 }
702 }
703 }
704
705 static void slic_intagg_set(struct adapter *adapter, u32 value)
706 {
707 slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
708 adapter->card->loadlevel_current = value;
709 }
710
711 static void slic_soft_reset(struct adapter *adapter)
712 {
713 if (adapter->card->state == CARD_UP) {
714 slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
715 mdelay(1);
716 }
717
718 slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
719 FLUSH);
720 mdelay(1);
721 }
722
723 static void slic_mac_address_config(struct adapter *adapter)
724 {
725 u32 value;
726 u32 value2;
727 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
728
729 value = *(u32 *) &adapter->currmacaddr[2];
730 value = ntohl(value);
731 slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
732 slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
733
734 value2 = (u32) ((adapter->currmacaddr[0] << 8 |
735 adapter->currmacaddr[1]) & 0xFFFF);
736
737 slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
738 slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
739
740 /* Write our multicast mask out to the card. This is done */
741 /* here in addition to the slic_mcast_addr_set routine */
742 /* because ALL_MCAST may have been enabled or disabled */
743 slic_mcast_set_mask(adapter);
744 }
745
746 static void slic_mac_config(struct adapter *adapter)
747 {
748 u32 value;
749 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
750
751 /* Setup GMAC gaps */
752 if (adapter->linkspeed == LINK_1000MB) {
753 value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
754 (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
755 (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
756 } else {
757 value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
758 (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
759 (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
760 }
761
762 /* enable GMII */
763 if (adapter->linkspeed == LINK_1000MB)
764 value |= GMCR_GBIT;
765
766 /* enable fullduplex */
767 if ((adapter->linkduplex == LINK_FULLD)
768 || (adapter->macopts & MAC_LOOPBACK)) {
769 value |= GMCR_FULLD;
770 }
771
772 /* write mac config */
773 slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
774
775 /* setup mac addresses */
776 slic_mac_address_config(adapter);
777 }
778
779 static void slic_config_set(struct adapter *adapter, bool linkchange)
780 {
781 u32 value;
782 u32 RcrReset;
783 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
784
785 if (linkchange) {
786 /* Setup MAC */
787 slic_mac_config(adapter);
788 RcrReset = GRCR_RESET;
789 } else {
790 slic_mac_address_config(adapter);
791 RcrReset = 0;
792 }
793
794 if (adapter->linkduplex == LINK_FULLD) {
795 /* setup xmtcfg */
796 value = (GXCR_RESET | /* Always reset */
797 GXCR_XMTEN | /* Enable transmit */
798 GXCR_PAUSEEN); /* Enable pause */
799
800 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
801
802 /* Setup rcvcfg last */
803 value = (RcrReset | /* Reset, if linkchange */
804 GRCR_CTLEN | /* Enable CTL frames */
805 GRCR_ADDRAEN | /* Address A enable */
806 GRCR_RCVBAD | /* Rcv bad frames */
807 (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
808 } else {
809 /* setup xmtcfg */
810 value = (GXCR_RESET | /* Always reset */
811 GXCR_XMTEN); /* Enable transmit */
812
813 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
814
815 /* Setup rcvcfg last */
816 value = (RcrReset | /* Reset, if linkchange */
817 GRCR_ADDRAEN | /* Address A enable */
818 GRCR_RCVBAD | /* Rcv bad frames */
819 (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
820 }
821
822 if (adapter->state != ADAPT_DOWN) {
823 /* Only enable receive if we are restarting or running */
824 value |= GRCR_RCVEN;
825 }
826
827 if (adapter->macopts & MAC_PROMISC)
828 value |= GRCR_RCVALL;
829
830 slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
831 }
832
833 /*
834 * Turn off RCV and XMT, power down PHY
835 */
836 static void slic_config_clear(struct adapter *adapter)
837 {
838 u32 value;
839 u32 phy_config;
840 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
841
842 /* Setup xmtcfg */
843 value = (GXCR_RESET | /* Always reset */
844 GXCR_PAUSEEN); /* Enable pause */
845
846 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
847
848 value = (GRCR_RESET | /* Always reset */
849 GRCR_CTLEN | /* Enable CTL frames */
850 GRCR_ADDRAEN | /* Address A enable */
851 (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
852
853 slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
854
855 /* power down phy */
856 phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
857 slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
858 }
859
860 static bool slic_mac_filter(struct adapter *adapter,
861 struct ether_header *ether_frame)
862 {
863 struct net_device *netdev = adapter->netdev;
864 u32 opts = adapter->macopts;
865 u32 *dhost4 = (u32 *)&ether_frame->ether_dhost[0];
866 u16 *dhost2 = (u16 *)&ether_frame->ether_dhost[4];
867
868 if (opts & MAC_PROMISC)
869 return true;
870
871 if ((*dhost4 == 0xFFFFFFFF) && (*dhost2 == 0xFFFF)) {
872 if (opts & MAC_BCAST) {
873 adapter->rcv_broadcasts++;
874 return true;
875 } else {
876 return false;
877 }
878 }
879
880 if (ether_frame->ether_dhost[0] & 0x01) {
881 if (opts & MAC_ALLMCAST) {
882 adapter->rcv_multicasts++;
883 netdev->stats.multicast++;
884 return true;
885 }
886 if (opts & MAC_MCAST) {
887 struct mcast_address *mcaddr = adapter->mcastaddrs;
888
889 while (mcaddr) {
890 if (!compare_ether_addr(mcaddr->address,
891 ether_frame->ether_dhost)) {
892 adapter->rcv_multicasts++;
893 netdev->stats.multicast++;
894 return true;
895 }
896 mcaddr = mcaddr->next;
897 }
898 return false;
899 } else {
900 return false;
901 }
902 }
903 if (opts & MAC_DIRECTED) {
904 adapter->rcv_unicasts++;
905 return true;
906 }
907 return false;
908
909 }
910
911 static int slic_mac_set_address(struct net_device *dev, void *ptr)
912 {
913 struct adapter *adapter = netdev_priv(dev);
914 struct sockaddr *addr = ptr;
915
916 if (netif_running(dev))
917 return -EBUSY;
918 if (!adapter)
919 return -EBUSY;
920
921 if (!is_valid_ether_addr(addr->sa_data))
922 return -EINVAL;
923
924 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
925 memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
926
927 slic_config_set(adapter, true);
928 return 0;
929 }
930
931 static void slic_timer_load_check(ulong cardaddr)
932 {
933 struct sliccard *card = (struct sliccard *)cardaddr;
934 struct adapter *adapter = card->master;
935 u32 __iomem *intagg;
936 u32 load = card->events;
937 u32 level = 0;
938
939 intagg = &adapter->slic_regs->slic_intagg;
940
941 if ((adapter) && (adapter->state == ADAPT_UP) &&
942 (card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
943 if (adapter->devid == SLIC_1GB_DEVICE_ID) {
944 if (adapter->linkspeed == LINK_1000MB)
945 level = 100;
946 else {
947 if (load > SLIC_LOAD_5)
948 level = SLIC_INTAGG_5;
949 else if (load > SLIC_LOAD_4)
950 level = SLIC_INTAGG_4;
951 else if (load > SLIC_LOAD_3)
952 level = SLIC_INTAGG_3;
953 else if (load > SLIC_LOAD_2)
954 level = SLIC_INTAGG_2;
955 else if (load > SLIC_LOAD_1)
956 level = SLIC_INTAGG_1;
957 else
958 level = SLIC_INTAGG_0;
959 }
960 if (card->loadlevel_current != level) {
961 card->loadlevel_current = level;
962 slic_reg32_write(intagg, level, FLUSH);
963 }
964 } else {
965 if (load > SLIC_LOAD_5)
966 level = SLIC_INTAGG_5;
967 else if (load > SLIC_LOAD_4)
968 level = SLIC_INTAGG_4;
969 else if (load > SLIC_LOAD_3)
970 level = SLIC_INTAGG_3;
971 else if (load > SLIC_LOAD_2)
972 level = SLIC_INTAGG_2;
973 else if (load > SLIC_LOAD_1)
974 level = SLIC_INTAGG_1;
975 else
976 level = SLIC_INTAGG_0;
977 if (card->loadlevel_current != level) {
978 card->loadlevel_current = level;
979 slic_reg32_write(intagg, level, FLUSH);
980 }
981 }
982 }
983 card->events = 0;
984 card->loadtimer.expires = jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
985 add_timer(&card->loadtimer);
986 }
987
988 static int slic_upr_queue_request(struct adapter *adapter,
989 u32 upr_request,
990 u32 upr_data,
991 u32 upr_data_h,
992 u32 upr_buffer, u32 upr_buffer_h)
993 {
994 struct slic_upr *upr;
995 struct slic_upr *uprqueue;
996
997 upr = kmalloc(sizeof(struct slic_upr), GFP_ATOMIC);
998 if (!upr)
999 return -ENOMEM;
1000
1001 upr->adapter = adapter->port;
1002 upr->upr_request = upr_request;
1003 upr->upr_data = upr_data;
1004 upr->upr_buffer = upr_buffer;
1005 upr->upr_data_h = upr_data_h;
1006 upr->upr_buffer_h = upr_buffer_h;
1007 upr->next = NULL;
1008 if (adapter->upr_list) {
1009 uprqueue = adapter->upr_list;
1010
1011 while (uprqueue->next)
1012 uprqueue = uprqueue->next;
1013 uprqueue->next = upr;
1014 } else {
1015 adapter->upr_list = upr;
1016 }
1017 return 0;
1018 }
1019
1020 static void slic_upr_start(struct adapter *adapter)
1021 {
1022 struct slic_upr *upr;
1023 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
1024 /*
1025 char * ptr1;
1026 char * ptr2;
1027 uint cmdoffset;
1028 */
1029 upr = adapter->upr_list;
1030 if (!upr)
1031 return;
1032 if (adapter->upr_busy)
1033 return;
1034 adapter->upr_busy = 1;
1035
1036 switch (upr->upr_request) {
1037 case SLIC_UPR_STATS:
1038 if (upr->upr_data_h == 0) {
1039 slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
1040 FLUSH);
1041 } else {
1042 slic_reg64_write(adapter, &slic_regs->slic_stats64,
1043 upr->upr_data,
1044 &slic_regs->slic_addr_upper,
1045 upr->upr_data_h, FLUSH);
1046 }
1047 break;
1048
1049 case SLIC_UPR_RLSR:
1050 slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
1051 &slic_regs->slic_addr_upper, upr->upr_data_h,
1052 FLUSH);
1053 break;
1054
1055 case SLIC_UPR_RCONFIG:
1056 slic_reg64_write(adapter, &slic_regs->slic_rconfig,
1057 upr->upr_data, &slic_regs->slic_addr_upper,
1058 upr->upr_data_h, FLUSH);
1059 break;
1060 case SLIC_UPR_PING:
1061 slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
1062 break;
1063 default:
1064 ASSERT(0);
1065 }
1066 }
1067
1068 static int slic_upr_request(struct adapter *adapter,
1069 u32 upr_request,
1070 u32 upr_data,
1071 u32 upr_data_h,
1072 u32 upr_buffer, u32 upr_buffer_h)
1073 {
1074 int rc;
1075
1076 spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
1077 rc = slic_upr_queue_request(adapter,
1078 upr_request,
1079 upr_data,
1080 upr_data_h, upr_buffer, upr_buffer_h);
1081 if (rc)
1082 goto err_unlock_irq;
1083
1084 slic_upr_start(adapter);
1085 err_unlock_irq:
1086 spin_unlock_irqrestore(&adapter->upr_lock.lock,
1087 adapter->upr_lock.flags);
1088 return rc;
1089 }
1090
1091 static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
1092 {
1093 u32 linkstatus = adapter->pshmem->linkstatus;
1094 uint linkup;
1095 unsigned char linkspeed;
1096 unsigned char linkduplex;
1097
1098 if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
1099 struct slic_shmem *pshmem;
1100
1101 pshmem = (struct slic_shmem *)adapter->phys_shmem;
1102 #if BITS_PER_LONG == 64
1103 slic_upr_queue_request(adapter,
1104 SLIC_UPR_RLSR,
1105 SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
1106 SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
1107 0, 0);
1108 #else
1109 slic_upr_queue_request(adapter,
1110 SLIC_UPR_RLSR,
1111 (u32) &pshmem->linkstatus,
1112 SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
1113 #endif
1114 return;
1115 }
1116 if (adapter->state != ADAPT_UP)
1117 return;
1118
1119 ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
1120 || (adapter->devid == SLIC_2GB_DEVICE_ID));
1121
1122 linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
1123 if (linkstatus & GIG_SPEED_1000)
1124 linkspeed = LINK_1000MB;
1125 else if (linkstatus & GIG_SPEED_100)
1126 linkspeed = LINK_100MB;
1127 else
1128 linkspeed = LINK_10MB;
1129
1130 if (linkstatus & GIG_FULLDUPLEX)
1131 linkduplex = LINK_FULLD;
1132 else
1133 linkduplex = LINK_HALFD;
1134
1135 if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
1136 return;
1137
1138 /* link up event, but nothing has changed */
1139 if ((adapter->linkstate == LINK_UP) &&
1140 (linkup == LINK_UP) &&
1141 (adapter->linkspeed == linkspeed) &&
1142 (adapter->linkduplex == linkduplex))
1143 return;
1144
1145 /* link has changed at this point */
1146
1147 /* link has gone from up to down */
1148 if (linkup == LINK_DOWN) {
1149 adapter->linkstate = LINK_DOWN;
1150 return;
1151 }
1152
1153 /* link has gone from down to up */
1154 adapter->linkspeed = linkspeed;
1155 adapter->linkduplex = linkduplex;
1156
1157 if (adapter->linkstate != LINK_UP) {
1158 /* setup the mac */
1159 slic_config_set(adapter, true);
1160 adapter->linkstate = LINK_UP;
1161 netif_start_queue(adapter->netdev);
1162 }
1163 }
1164
1165 static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
1166 {
1167 struct sliccard *card = adapter->card;
1168 struct slic_upr *upr;
1169
1170 spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
1171 upr = adapter->upr_list;
1172 if (!upr) {
1173 ASSERT(0);
1174 spin_unlock_irqrestore(&adapter->upr_lock.lock,
1175 adapter->upr_lock.flags);
1176 return;
1177 }
1178 adapter->upr_list = upr->next;
1179 upr->next = NULL;
1180 adapter->upr_busy = 0;
1181 ASSERT(adapter->port == upr->adapter);
1182 switch (upr->upr_request) {
1183 case SLIC_UPR_STATS:
1184 {
1185 struct slic_stats *slicstats =
1186 (struct slic_stats *) &adapter->pshmem->inicstats;
1187 struct slic_stats *newstats = slicstats;
1188 struct slic_stats *old = &adapter->inicstats_prev;
1189 struct slicnet_stats *stst = &adapter->slic_stats;
1190
1191 if (isr & ISR_UPCERR) {
1192 dev_err(&adapter->netdev->dev,
1193 "SLIC_UPR_STATS command failed isr[%x]\n",
1194 isr);
1195
1196 break;
1197 }
1198 UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs,
1199 newstats->xmit_tcp_segs_gb,
1200 old->xmit_tcp_segs_gb);
1201
1202 UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes,
1203 newstats->xmit_tcp_bytes_gb,
1204 old->xmit_tcp_bytes_gb);
1205
1206 UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs,
1207 newstats->rcv_tcp_segs_gb,
1208 old->rcv_tcp_segs_gb);
1209
1210 UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes,
1211 newstats->rcv_tcp_bytes_gb,
1212 old->rcv_tcp_bytes_gb);
1213
1214 UPDATE_STATS_GB(stst->iface.xmt_bytes,
1215 newstats->xmit_bytes_gb,
1216 old->xmit_bytes_gb);
1217
1218 UPDATE_STATS_GB(stst->iface.xmt_ucast,
1219 newstats->xmit_unicasts_gb,
1220 old->xmit_unicasts_gb);
1221
1222 UPDATE_STATS_GB(stst->iface.rcv_bytes,
1223 newstats->rcv_bytes_gb,
1224 old->rcv_bytes_gb);
1225
1226 UPDATE_STATS_GB(stst->iface.rcv_ucast,
1227 newstats->rcv_unicasts_gb,
1228 old->rcv_unicasts_gb);
1229
1230 UPDATE_STATS_GB(stst->iface.xmt_errors,
1231 newstats->xmit_collisions_gb,
1232 old->xmit_collisions_gb);
1233
1234 UPDATE_STATS_GB(stst->iface.xmt_errors,
1235 newstats->xmit_excess_collisions_gb,
1236 old->xmit_excess_collisions_gb);
1237
1238 UPDATE_STATS_GB(stst->iface.xmt_errors,
1239 newstats->xmit_other_error_gb,
1240 old->xmit_other_error_gb);
1241
1242 UPDATE_STATS_GB(stst->iface.rcv_errors,
1243 newstats->rcv_other_error_gb,
1244 old->rcv_other_error_gb);
1245
1246 UPDATE_STATS_GB(stst->iface.rcv_discards,
1247 newstats->rcv_drops_gb,
1248 old->rcv_drops_gb);
1249
1250 if (newstats->rcv_drops_gb > old->rcv_drops_gb) {
1251 adapter->rcv_drops +=
1252 (newstats->rcv_drops_gb -
1253 old->rcv_drops_gb);
1254 }
1255 memcpy(old, newstats, sizeof(struct slic_stats));
1256 break;
1257 }
1258 case SLIC_UPR_RLSR:
1259 slic_link_upr_complete(adapter, isr);
1260 break;
1261 case SLIC_UPR_RCONFIG:
1262 break;
1263 case SLIC_UPR_RPHY:
1264 ASSERT(0);
1265 break;
1266 case SLIC_UPR_ENLB:
1267 ASSERT(0);
1268 break;
1269 case SLIC_UPR_ENCT:
1270 ASSERT(0);
1271 break;
1272 case SLIC_UPR_PDWN:
1273 ASSERT(0);
1274 break;
1275 case SLIC_UPR_PING:
1276 card->pingstatus |= (isr & ISR_PINGDSMASK);
1277 break;
1278 default:
1279 ASSERT(0);
1280 }
1281 kfree(upr);
1282 slic_upr_start(adapter);
1283 spin_unlock_irqrestore(&adapter->upr_lock.lock,
1284 adapter->upr_lock.flags);
1285 }
1286
1287 static void slic_config_get(struct adapter *adapter, u32 config,
1288 u32 config_h)
1289 {
1290 int status;
1291
1292 status = slic_upr_request(adapter,
1293 SLIC_UPR_RCONFIG,
1294 (u32) config, (u32) config_h, 0, 0);
1295 ASSERT(status == 0);
1296 }
1297
1298 /*
1299 * this is here to checksum the eeprom, there is some ucode bug
1300 * which prevens us from using the ucode result.
1301 * remove this once ucode is fixed.
1302 */
1303 static ushort slic_eeprom_cksum(char *m, int len)
1304 {
1305 #define ADDCARRY(x) (x > 65535 ? x -= 65535 : x)
1306 #define REDUCE {l_util.l = sum; sum = l_util.s[0] + l_util.s[1]; ADDCARRY(sum);\
1307 }
1308
1309 u16 *w;
1310 u32 sum = 0;
1311 u32 byte_swapped = 0;
1312 u32 w_int;
1313
1314 union {
1315 char c[2];
1316 ushort s;
1317 } s_util;
1318
1319 union {
1320 ushort s[2];
1321 int l;
1322 } l_util;
1323
1324 l_util.l = 0;
1325 s_util.s = 0;
1326
1327 w = (u16 *)m;
1328 #if BITS_PER_LONG == 64
1329 w_int = (u32) ((ulong) w & 0x00000000FFFFFFFF);
1330 #else
1331 w_int = (u32) (w);
1332 #endif
1333 if ((1 & w_int) && (len > 0)) {
1334 REDUCE;
1335 sum <<= 8;
1336 s_util.c[0] = *(unsigned char *)w;
1337 w = (u16 *)((char *)w + 1);
1338 len--;
1339 byte_swapped = 1;
1340 }
1341
1342 /* Unroll the loop to make overhead from branches &c small. */
1343 while ((len -= 32) >= 0) {
1344 sum += w[0];
1345 sum += w[1];
1346 sum += w[2];
1347 sum += w[3];
1348 sum += w[4];
1349 sum += w[5];
1350 sum += w[6];
1351 sum += w[7];
1352 sum += w[8];
1353 sum += w[9];
1354 sum += w[10];
1355 sum += w[11];
1356 sum += w[12];
1357 sum += w[13];
1358 sum += w[14];
1359 sum += w[15];
1360 w = (u16 *)((ulong) w + 16); /* verify */
1361 }
1362 len += 32;
1363 while ((len -= 8) >= 0) {
1364 sum += w[0];
1365 sum += w[1];
1366 sum += w[2];
1367 sum += w[3];
1368 w = (u16 *)((ulong) w + 4); /* verify */
1369 }
1370 len += 8;
1371 if (len != 0 || byte_swapped != 0) {
1372 REDUCE;
1373 while ((len -= 2) >= 0)
1374 sum += *w++; /* verify */
1375 if (byte_swapped) {
1376 REDUCE;
1377 sum <<= 8;
1378 byte_swapped = 0;
1379 if (len == -1) {
1380 s_util.c[1] = *(char *) w;
1381 sum += s_util.s;
1382 len = 0;
1383 } else {
1384 len = -1;
1385 }
1386
1387 } else if (len == -1) {
1388 s_util.c[0] = *(char *) w;
1389 }
1390
1391 if (len == -1) {
1392 s_util.c[1] = 0;
1393 sum += s_util.s;
1394 }
1395 }
1396 REDUCE;
1397 return (ushort) sum;
1398 }
1399
1400 static void slic_rspqueue_free(struct adapter *adapter)
1401 {
1402 int i;
1403 struct slic_rspqueue *rspq = &adapter->rspqueue;
1404
1405 for (i = 0; i < rspq->num_pages; i++) {
1406 if (rspq->vaddr[i]) {
1407 pci_free_consistent(adapter->pcidev, PAGE_SIZE,
1408 rspq->vaddr[i], rspq->paddr[i]);
1409 }
1410 rspq->vaddr[i] = NULL;
1411 rspq->paddr[i] = 0;
1412 }
1413 rspq->offset = 0;
1414 rspq->pageindex = 0;
1415 rspq->rspbuf = NULL;
1416 }
1417
1418 static int slic_rspqueue_init(struct adapter *adapter)
1419 {
1420 int i;
1421 struct slic_rspqueue *rspq = &adapter->rspqueue;
1422 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
1423 u32 paddrh = 0;
1424
1425 ASSERT(adapter->state == ADAPT_DOWN);
1426 memset(rspq, 0, sizeof(struct slic_rspqueue));
1427
1428 rspq->num_pages = SLIC_RSPQ_PAGES_GB;
1429
1430 for (i = 0; i < rspq->num_pages; i++) {
1431 rspq->vaddr[i] = pci_alloc_consistent(adapter->pcidev,
1432 PAGE_SIZE,
1433 &rspq->paddr[i]);
1434 if (!rspq->vaddr[i]) {
1435 dev_err(&adapter->pcidev->dev,
1436 "pci_alloc_consistent failed\n");
1437 slic_rspqueue_free(adapter);
1438 return -ENOMEM;
1439 }
1440 /* FIXME:
1441 * do we really need this assertions (4K PAGE_SIZE aligned addr)? */
1442 #if 0
1443 #ifndef CONFIG_X86_64
1444 ASSERT(((u32) rspq->vaddr[i] & 0xFFFFF000) ==
1445 (u32) rspq->vaddr[i]);
1446 ASSERT(((u32) rspq->paddr[i] & 0xFFFFF000) ==
1447 (u32) rspq->paddr[i]);
1448 #endif
1449 #endif
1450 memset(rspq->vaddr[i], 0, PAGE_SIZE);
1451
1452 if (paddrh == 0) {
1453 slic_reg32_write(&slic_regs->slic_rbar,
1454 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1455 DONT_FLUSH);
1456 } else {
1457 slic_reg64_write(adapter, &slic_regs->slic_rbar64,
1458 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1459 &slic_regs->slic_addr_upper,
1460 paddrh, DONT_FLUSH);
1461 }
1462 }
1463 rspq->offset = 0;
1464 rspq->pageindex = 0;
1465 rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
1466 return 0;
1467 }
1468
1469 static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
1470 {
1471 struct slic_rspqueue *rspq = &adapter->rspqueue;
1472 struct slic_rspbuf *buf;
1473
1474 if (!(rspq->rspbuf->status))
1475 return NULL;
1476
1477 buf = rspq->rspbuf;
1478 #if BITS_PER_LONG == 32
1479 ASSERT((buf->status & 0xFFFFFFE0) == 0);
1480 #endif
1481 ASSERT(buf->hosthandle);
1482 if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
1483 rspq->rspbuf++;
1484 #if BITS_PER_LONG == 32
1485 ASSERT(((u32) rspq->rspbuf & 0xFFFFFFE0) ==
1486 (u32) rspq->rspbuf);
1487 #endif
1488 } else {
1489 ASSERT(rspq->offset == SLIC_RSPQ_BUFSINPAGE);
1490 slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
1491 (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
1492 &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
1493 rspq->pageindex = (++rspq->pageindex) % rspq->num_pages;
1494 rspq->offset = 0;
1495 rspq->rspbuf = (struct slic_rspbuf *)
1496 rspq->vaddr[rspq->pageindex];
1497 #if BITS_PER_LONG == 32
1498 ASSERT(((u32) rspq->rspbuf & 0xFFFFF000) ==
1499 (u32) rspq->rspbuf);
1500 #endif
1501 }
1502 #if BITS_PER_LONG == 32
1503 ASSERT(((u32) buf & 0xFFFFFFE0) == (u32) buf);
1504 #endif
1505 return buf;
1506 }
1507
1508 static void slic_cmdqmem_init(struct adapter *adapter)
1509 {
1510 struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1511
1512 memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
1513 }
1514
1515 static void slic_cmdqmem_free(struct adapter *adapter)
1516 {
1517 struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1518 int i;
1519
1520 for (i = 0; i < SLIC_CMDQ_MAXPAGES; i++) {
1521 if (cmdqmem->pages[i]) {
1522 pci_free_consistent(adapter->pcidev,
1523 PAGE_SIZE,
1524 (void *) cmdqmem->pages[i],
1525 cmdqmem->dma_pages[i]);
1526 }
1527 }
1528 memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
1529 }
1530
1531 static u32 *slic_cmdqmem_addpage(struct adapter *adapter)
1532 {
1533 struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1534 u32 *pageaddr;
1535
1536 if (cmdqmem->pagecnt >= SLIC_CMDQ_MAXPAGES)
1537 return NULL;
1538 pageaddr = pci_alloc_consistent(adapter->pcidev,
1539 PAGE_SIZE,
1540 &cmdqmem->dma_pages[cmdqmem->pagecnt]);
1541 if (!pageaddr)
1542 return NULL;
1543 #if BITS_PER_LONG == 32
1544 ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
1545 #endif
1546 cmdqmem->pages[cmdqmem->pagecnt] = pageaddr;
1547 cmdqmem->pagecnt++;
1548 return pageaddr;
1549 }
1550
1551 static void slic_cmdq_free(struct adapter *adapter)
1552 {
1553 struct slic_hostcmd *cmd;
1554
1555 cmd = adapter->cmdq_all.head;
1556 while (cmd) {
1557 if (cmd->busy) {
1558 struct sk_buff *tempskb;
1559
1560 tempskb = cmd->skb;
1561 if (tempskb) {
1562 cmd->skb = NULL;
1563 dev_kfree_skb_irq(tempskb);
1564 }
1565 }
1566 cmd = cmd->next_all;
1567 }
1568 memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1569 memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1570 memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1571 slic_cmdqmem_free(adapter);
1572 }
1573
1574 static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
1575 {
1576 struct slic_hostcmd *cmd;
1577 struct slic_hostcmd *prev;
1578 struct slic_hostcmd *tail;
1579 struct slic_cmdqueue *cmdq;
1580 int cmdcnt;
1581 void *cmdaddr;
1582 ulong phys_addr;
1583 u32 phys_addrl;
1584 u32 phys_addrh;
1585 struct slic_handle *pslic_handle;
1586
1587 cmdaddr = page;
1588 cmd = (struct slic_hostcmd *)cmdaddr;
1589 cmdcnt = 0;
1590
1591 phys_addr = virt_to_bus((void *)page);
1592 phys_addrl = SLIC_GET_ADDR_LOW(phys_addr);
1593 phys_addrh = SLIC_GET_ADDR_HIGH(phys_addr);
1594
1595 prev = NULL;
1596 tail = cmd;
1597 while ((cmdcnt < SLIC_CMDQ_CMDSINPAGE) &&
1598 (adapter->slic_handle_ix < 256)) {
1599 /* Allocate and initialize a SLIC_HANDLE for this command */
1600 SLIC_GET_SLIC_HANDLE(adapter, pslic_handle);
1601 if (pslic_handle == NULL)
1602 ASSERT(0);
1603 ASSERT(pslic_handle ==
1604 &adapter->slic_handles[pslic_handle->token.
1605 handle_index]);
1606 pslic_handle->type = SLIC_HANDLE_CMD;
1607 pslic_handle->address = (void *) cmd;
1608 pslic_handle->offset = (ushort) adapter->slic_handle_ix++;
1609 pslic_handle->other_handle = NULL;
1610 pslic_handle->next = NULL;
1611
1612 cmd->pslic_handle = pslic_handle;
1613 cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
1614 cmd->busy = false;
1615 cmd->paddrl = phys_addrl;
1616 cmd->paddrh = phys_addrh;
1617 cmd->next_all = prev;
1618 cmd->next = prev;
1619 prev = cmd;
1620 phys_addrl += SLIC_HOSTCMD_SIZE;
1621 cmdaddr += SLIC_HOSTCMD_SIZE;
1622
1623 cmd = (struct slic_hostcmd *)cmdaddr;
1624 cmdcnt++;
1625 }
1626
1627 cmdq = &adapter->cmdq_all;
1628 cmdq->count += cmdcnt; /* SLIC_CMDQ_CMDSINPAGE; mooktodo */
1629 tail->next_all = cmdq->head;
1630 cmdq->head = prev;
1631 cmdq = &adapter->cmdq_free;
1632 spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1633 cmdq->count += cmdcnt; /* SLIC_CMDQ_CMDSINPAGE; mooktodo */
1634 tail->next = cmdq->head;
1635 cmdq->head = prev;
1636 spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1637 }
1638
1639 static int slic_cmdq_init(struct adapter *adapter)
1640 {
1641 int i;
1642 u32 *pageaddr;
1643
1644 ASSERT(adapter->state == ADAPT_DOWN);
1645 memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1646 memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1647 memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1648 spin_lock_init(&adapter->cmdq_all.lock.lock);
1649 spin_lock_init(&adapter->cmdq_free.lock.lock);
1650 spin_lock_init(&adapter->cmdq_done.lock.lock);
1651 slic_cmdqmem_init(adapter);
1652 adapter->slic_handle_ix = 1;
1653 for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
1654 pageaddr = slic_cmdqmem_addpage(adapter);
1655 #if BITS_PER_LONG == 32
1656 ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
1657 #endif
1658 if (!pageaddr) {
1659 slic_cmdq_free(adapter);
1660 return -ENOMEM;
1661 }
1662 slic_cmdq_addcmdpage(adapter, pageaddr);
1663 }
1664 adapter->slic_handle_ix = 1;
1665
1666 return 0;
1667 }
1668
1669 static void slic_cmdq_reset(struct adapter *adapter)
1670 {
1671 struct slic_hostcmd *hcmd;
1672 struct sk_buff *skb;
1673 u32 outstanding;
1674
1675 spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
1676 adapter->cmdq_free.lock.flags);
1677 spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
1678 adapter->cmdq_done.lock.flags);
1679 outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
1680 outstanding -= adapter->cmdq_free.count;
1681 hcmd = adapter->cmdq_all.head;
1682 while (hcmd) {
1683 if (hcmd->busy) {
1684 skb = hcmd->skb;
1685 ASSERT(skb);
1686 hcmd->busy = 0;
1687 hcmd->skb = NULL;
1688 dev_kfree_skb_irq(skb);
1689 }
1690 hcmd = hcmd->next_all;
1691 }
1692 adapter->cmdq_free.count = 0;
1693 adapter->cmdq_free.head = NULL;
1694 adapter->cmdq_free.tail = NULL;
1695 adapter->cmdq_done.count = 0;
1696 adapter->cmdq_done.head = NULL;
1697 adapter->cmdq_done.tail = NULL;
1698 adapter->cmdq_free.head = adapter->cmdq_all.head;
1699 hcmd = adapter->cmdq_all.head;
1700 while (hcmd) {
1701 adapter->cmdq_free.count++;
1702 hcmd->next = hcmd->next_all;
1703 hcmd = hcmd->next_all;
1704 }
1705 if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
1706 dev_err(&adapter->netdev->dev,
1707 "free_count %d != all count %d\n",
1708 adapter->cmdq_free.count, adapter->cmdq_all.count);
1709 }
1710 spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
1711 adapter->cmdq_done.lock.flags);
1712 spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
1713 adapter->cmdq_free.lock.flags);
1714 }
1715
1716 static void slic_cmdq_getdone(struct adapter *adapter)
1717 {
1718 struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
1719 struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
1720
1721 ASSERT(free_cmdq->head == NULL);
1722 spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1723
1724 free_cmdq->head = done_cmdq->head;
1725 free_cmdq->count = done_cmdq->count;
1726 done_cmdq->head = NULL;
1727 done_cmdq->tail = NULL;
1728 done_cmdq->count = 0;
1729 spin_unlock_irqrestore(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1730 }
1731
1732 static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter)
1733 {
1734 struct slic_cmdqueue *cmdq = &adapter->cmdq_free;
1735 struct slic_hostcmd *cmd = NULL;
1736
1737 lock_and_retry:
1738 spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1739 retry:
1740 cmd = cmdq->head;
1741 if (cmd) {
1742 cmdq->head = cmd->next;
1743 cmdq->count--;
1744 spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1745 } else {
1746 slic_cmdq_getdone(adapter);
1747 cmd = cmdq->head;
1748 if (cmd) {
1749 goto retry;
1750 } else {
1751 u32 *pageaddr;
1752
1753 spin_unlock_irqrestore(&cmdq->lock.lock,
1754 cmdq->lock.flags);
1755 pageaddr = slic_cmdqmem_addpage(adapter);
1756 if (pageaddr) {
1757 slic_cmdq_addcmdpage(adapter, pageaddr);
1758 goto lock_and_retry;
1759 }
1760 }
1761 }
1762 return cmd;
1763 }
1764
1765 static void slic_cmdq_putdone_irq(struct adapter *adapter,
1766 struct slic_hostcmd *cmd)
1767 {
1768 struct slic_cmdqueue *cmdq = &adapter->cmdq_done;
1769
1770 spin_lock(&cmdq->lock.lock);
1771 cmd->busy = 0;
1772 cmd->next = cmdq->head;
1773 cmdq->head = cmd;
1774 cmdq->count++;
1775 if ((adapter->xmitq_full) && (cmdq->count > 10))
1776 netif_wake_queue(adapter->netdev);
1777 spin_unlock(&cmdq->lock.lock);
1778 }
1779
1780 static int slic_rcvqueue_fill(struct adapter *adapter)
1781 {
1782 void *paddr;
1783 u32 paddrl;
1784 u32 paddrh;
1785 struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1786 int i = 0;
1787 struct device *dev = &adapter->netdev->dev;
1788
1789 while (i < SLIC_RCVQ_FILLENTRIES) {
1790 struct slic_rcvbuf *rcvbuf;
1791 struct sk_buff *skb;
1792 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1793 retry_rcvqfill:
1794 #endif
1795 skb = alloc_skb(SLIC_RCVQ_RCVBUFSIZE, GFP_ATOMIC);
1796 if (skb) {
1797 paddr = (void *)pci_map_single(adapter->pcidev,
1798 skb->data,
1799 SLIC_RCVQ_RCVBUFSIZE,
1800 PCI_DMA_FROMDEVICE);
1801 paddrl = SLIC_GET_ADDR_LOW(paddr);
1802 paddrh = SLIC_GET_ADDR_HIGH(paddr);
1803
1804 skb->len = SLIC_RCVBUF_HEADSIZE;
1805 rcvbuf = (struct slic_rcvbuf *)skb->head;
1806 rcvbuf->status = 0;
1807 skb->next = NULL;
1808 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1809 if (paddrl == 0) {
1810 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1811 __func__);
1812 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1813 dev_err(dev, " skbdata[%p]\n", skb->data);
1814 dev_err(dev, " skblen[%x]\n", skb->len);
1815 dev_err(dev, " paddr[%p]\n", paddr);
1816 dev_err(dev, " paddrl[%x]\n", paddrl);
1817 dev_err(dev, " paddrh[%x]\n", paddrh);
1818 dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
1819 dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
1820 dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
1821 dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
1822 goto retry_rcvqfill;
1823 }
1824 #else
1825 if (paddrl == 0) {
1826 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1827 __func__);
1828 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1829 dev_err(dev, " skbdata[%p]\n", skb->data);
1830 dev_err(dev, " skblen[%x]\n", skb->len);
1831 dev_err(dev, " paddr[%p]\n", paddr);
1832 dev_err(dev, " paddrl[%x]\n", paddrl);
1833 dev_err(dev, " paddrh[%x]\n", paddrh);
1834 dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
1835 dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
1836 dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
1837 dev_err(dev, "GIVE TO CARD ANYWAY\n");
1838 }
1839 #endif
1840 if (paddrh == 0) {
1841 slic_reg32_write(&adapter->slic_regs->slic_hbar,
1842 (u32)paddrl, DONT_FLUSH);
1843 } else {
1844 slic_reg64_write(adapter,
1845 &adapter->slic_regs->slic_hbar64,
1846 paddrl,
1847 &adapter->slic_regs->slic_addr_upper,
1848 paddrh, DONT_FLUSH);
1849 }
1850 if (rcvq->head)
1851 rcvq->tail->next = skb;
1852 else
1853 rcvq->head = skb;
1854 rcvq->tail = skb;
1855 rcvq->count++;
1856 i++;
1857 } else {
1858 dev_err(&adapter->netdev->dev,
1859 "slic_rcvqueue_fill could only get [%d] skbuffs\n",
1860 i);
1861 break;
1862 }
1863 }
1864 return i;
1865 }
1866
1867 static void slic_rcvqueue_free(struct adapter *adapter)
1868 {
1869 struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1870 struct sk_buff *skb;
1871
1872 while (rcvq->head) {
1873 skb = rcvq->head;
1874 rcvq->head = rcvq->head->next;
1875 dev_kfree_skb(skb);
1876 }
1877 rcvq->tail = NULL;
1878 rcvq->head = NULL;
1879 rcvq->count = 0;
1880 }
1881
1882 static int slic_rcvqueue_init(struct adapter *adapter)
1883 {
1884 int i, count;
1885 struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1886
1887 ASSERT(adapter->state == ADAPT_DOWN);
1888 rcvq->tail = NULL;
1889 rcvq->head = NULL;
1890 rcvq->size = SLIC_RCVQ_ENTRIES;
1891 rcvq->errors = 0;
1892 rcvq->count = 0;
1893 i = (SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES);
1894 count = 0;
1895 while (i) {
1896 count += slic_rcvqueue_fill(adapter);
1897 i--;
1898 }
1899 if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
1900 slic_rcvqueue_free(adapter);
1901 return -ENOMEM;
1902 }
1903 return 0;
1904 }
1905
1906 static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
1907 {
1908 struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1909 struct sk_buff *skb;
1910 struct slic_rcvbuf *rcvbuf;
1911 int count;
1912
1913 if (rcvq->count) {
1914 skb = rcvq->head;
1915 rcvbuf = (struct slic_rcvbuf *)skb->head;
1916 ASSERT(rcvbuf);
1917
1918 if (rcvbuf->status & IRHDDR_SVALID) {
1919 rcvq->head = rcvq->head->next;
1920 skb->next = NULL;
1921 rcvq->count--;
1922 } else {
1923 skb = NULL;
1924 }
1925 } else {
1926 dev_err(&adapter->netdev->dev,
1927 "RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
1928 skb = NULL;
1929 }
1930 while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
1931 count = slic_rcvqueue_fill(adapter);
1932 if (!count)
1933 break;
1934 }
1935 if (skb)
1936 rcvq->errors = 0;
1937 return skb;
1938 }
1939
1940 static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
1941 {
1942 struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1943 void *paddr;
1944 u32 paddrl;
1945 u32 paddrh;
1946 struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
1947 struct device *dev;
1948
1949 ASSERT(skb->len == SLIC_RCVBUF_HEADSIZE);
1950
1951 paddr = (void *)pci_map_single(adapter->pcidev, skb->head,
1952 SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
1953 rcvbuf->status = 0;
1954 skb->next = NULL;
1955
1956 paddrl = SLIC_GET_ADDR_LOW(paddr);
1957 paddrh = SLIC_GET_ADDR_HIGH(paddr);
1958
1959 if (paddrl == 0) {
1960 dev = &adapter->netdev->dev;
1961 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1962 __func__);
1963 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1964 dev_err(dev, " skbdata[%p]\n", skb->data);
1965 dev_err(dev, " skblen[%x]\n", skb->len);
1966 dev_err(dev, " paddr[%p]\n", paddr);
1967 dev_err(dev, " paddrl[%x]\n", paddrl);
1968 dev_err(dev, " paddrh[%x]\n", paddrh);
1969 dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
1970 dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
1971 dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
1972 }
1973 if (paddrh == 0) {
1974 slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
1975 DONT_FLUSH);
1976 } else {
1977 slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
1978 paddrl, &adapter->slic_regs->slic_addr_upper,
1979 paddrh, DONT_FLUSH);
1980 }
1981 if (rcvq->head)
1982 rcvq->tail->next = skb;
1983 else
1984 rcvq->head = skb;
1985 rcvq->tail = skb;
1986 rcvq->count++;
1987 return rcvq->count;
1988 }
1989
1990 static int slic_debug_card_show(struct seq_file *seq, void *v)
1991 {
1992 #ifdef MOOKTODO
1993 int i;
1994 struct sliccard *card = seq->private;
1995 struct slic_config *config = &card->config;
1996 unsigned char *fru = (unsigned char *)(&card->config.atk_fru);
1997 unsigned char *oemfru = (unsigned char *)(&card->config.OemFru);
1998 #endif
1999
2000 seq_printf(seq, "driver_version : %s\n", slic_proc_version);
2001 seq_printf(seq, "Microcode versions: \n");
2002 seq_printf(seq, " Gigabit (gb) : %s %s\n",
2003 MOJAVE_UCODE_VERS_STRING, MOJAVE_UCODE_VERS_DATE);
2004 seq_printf(seq, " Gigabit Receiver : %s %s\n",
2005 GB_RCVUCODE_VERS_STRING, GB_RCVUCODE_VERS_DATE);
2006 seq_printf(seq, "Vendor : %s\n", slic_vendor);
2007 seq_printf(seq, "Product Name : %s\n", slic_product_name);
2008 #ifdef MOOKTODO
2009 seq_printf(seq, "VendorId : %4.4X\n",
2010 config->VendorId);
2011 seq_printf(seq, "DeviceId : %4.4X\n",
2012 config->DeviceId);
2013 seq_printf(seq, "RevisionId : %2.2x\n",
2014 config->RevisionId);
2015 seq_printf(seq, "Bus # : %d\n", card->busnumber);
2016 seq_printf(seq, "Device # : %d\n", card->slotnumber);
2017 seq_printf(seq, "Interfaces : %d\n", card->card_size);
2018 seq_printf(seq, " Initialized : %d\n",
2019 card->adapters_activated);
2020 seq_printf(seq, " Allocated : %d\n",
2021 card->adapters_allocated);
2022 ASSERT(card->card_size <= SLIC_NBR_MACS);
2023 for (i = 0; i < card->card_size; i++) {
2024 seq_printf(seq,
2025 " MAC%d : %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
2026 i, config->macinfo[i].macaddrA[0],
2027 config->macinfo[i].macaddrA[1],
2028 config->macinfo[i].macaddrA[2],
2029 config->macinfo[i].macaddrA[3],
2030 config->macinfo[i].macaddrA[4],
2031 config->macinfo[i].macaddrA[5]);
2032 }
2033 seq_printf(seq, " IF Init State Duplex/Speed irq\n");
2034 seq_printf(seq, " -------------------------------\n");
2035 for (i = 0; i < card->adapters_allocated; i++) {
2036 struct adapter *adapter;
2037
2038 adapter = card->adapter[i];
2039 if (adapter) {
2040 seq_printf(seq,
2041 " %d %d %s %s %s 0x%X\n",
2042 adapter->physport, adapter->state,
2043 SLIC_LINKSTATE(adapter->linkstate),
2044 SLIC_DUPLEX(adapter->linkduplex),
2045 SLIC_SPEED(adapter->linkspeed),
2046 (uint) adapter->irq);
2047 }
2048 }
2049 seq_printf(seq, "Generation # : %4.4X\n", card->gennumber);
2050 seq_printf(seq, "RcvQ max entries : %4.4X\n",
2051 SLIC_RCVQ_ENTRIES);
2052 seq_printf(seq, "Ping Status : %8.8X\n",
2053 card->pingstatus);
2054 seq_printf(seq, "Minimum grant : %2.2x\n",
2055 config->MinGrant);
2056 seq_printf(seq, "Maximum Latency : %2.2x\n", config->MaxLat);
2057 seq_printf(seq, "PciStatus : %4.4x\n",
2058 config->Pcistatus);
2059 seq_printf(seq, "Debug Device Id : %4.4x\n",
2060 config->DbgDevId);
2061 seq_printf(seq, "DRAM ROM Function : %4.4x\n",
2062 config->DramRomFn);
2063 seq_printf(seq, "Network interface Pin 1 : %2.2x\n",
2064 config->NetIntPin1);
2065 seq_printf(seq, "Network interface Pin 2 : %2.2x\n",
2066 config->NetIntPin1);
2067 seq_printf(seq, "Network interface Pin 3 : %2.2x\n",
2068 config->NetIntPin1);
2069 seq_printf(seq, "PM capabilities : %4.4X\n",
2070 config->PMECapab);
2071 seq_printf(seq, "Network Clock Controls : %4.4X\n",
2072 config->NwClkCtrls);
2073
2074 switch (config->FruFormat) {
2075 case ATK_FRU_FORMAT:
2076 {
2077 seq_printf(seq,
2078 "Vendor : Alacritech, Inc.\n");
2079 seq_printf(seq,
2080 "Assembly # : %c%c%c%c%c%c\n",
2081 fru[0], fru[1], fru[2], fru[3], fru[4],
2082 fru[5]);
2083 seq_printf(seq,
2084 "Revision # : %c%c\n",
2085 fru[6], fru[7]);
2086
2087 if (config->OEMFruFormat == VENDOR4_FRU_FORMAT) {
2088 seq_printf(seq,
2089 "Serial # : "
2090 "%c%c%c%c%c%c%c%c%c%c%c%c\n",
2091 fru[8], fru[9], fru[10],
2092 fru[11], fru[12], fru[13],
2093 fru[16], fru[17], fru[18],
2094 fru[19], fru[20], fru[21]);
2095 } else {
2096 seq_printf(seq,
2097 "Serial # : "
2098 "%c%c%c%c%c%c%c%c%c%c%c%c%c%c\n",
2099 fru[8], fru[9], fru[10],
2100 fru[11], fru[12], fru[13],
2101 fru[14], fru[15], fru[16],
2102 fru[17], fru[18], fru[19],
2103 fru[20], fru[21]);
2104 }
2105 break;
2106 }
2107
2108 default:
2109 {
2110 seq_printf(seq,
2111 "Vendor : Alacritech, Inc.\n");
2112 seq_printf(seq,
2113 "Serial # : Empty FRU\n");
2114 break;
2115 }
2116 }
2117
2118 switch (config->OEMFruFormat) {
2119 case VENDOR1_FRU_FORMAT:
2120 {
2121 seq_printf(seq, "FRU Information:\n");
2122 seq_printf(seq, " Commodity # : %c\n",
2123 oemfru[0]);
2124 seq_printf(seq,
2125 " Assembly # : %c%c%c%c\n",
2126 oemfru[1], oemfru[2], oemfru[3], oemfru[4]);
2127 seq_printf(seq,
2128 " Revision # : %c%c\n",
2129 oemfru[5], oemfru[6]);
2130 seq_printf(seq,
2131 " Supplier # : %c%c\n",
2132 oemfru[7], oemfru[8]);
2133 seq_printf(seq,
2134 " Date : %c%c\n",
2135 oemfru[9], oemfru[10]);
2136 seq_sprintf(seq,
2137 " Sequence # : %c%c%c\n",
2138 oemfru[11], oemfru[12], oemfru[13]);
2139 break;
2140 }
2141
2142 case VENDOR2_FRU_FORMAT:
2143 {
2144 seq_printf(seq, "FRU Information:\n");
2145 seq_printf(seq,
2146 " Part # : "
2147 "%c%c%c%c%c%c%c%c\n",
2148 oemfru[0], oemfru[1], oemfru[2],
2149 oemfru[3], oemfru[4], oemfru[5],
2150 oemfru[6], oemfru[7]);
2151 seq_printf(seq,
2152 " Supplier # : %c%c%c%c%c\n",
2153 oemfru[8], oemfru[9], oemfru[10],
2154 oemfru[11], oemfru[12]);
2155 seq_printf(seq,
2156 " Date : %c%c%c\n",
2157 oemfru[13], oemfru[14], oemfru[15]);
2158 seq_sprintf(seq,
2159 " Sequence # : %c%c%c%c\n",
2160 oemfru[16], oemfru[17], oemfru[18],
2161 oemfru[19]);
2162 break;
2163 }
2164
2165 case VENDOR3_FRU_FORMAT:
2166 {
2167 seq_printf(seq, "FRU Information:\n");
2168 }
2169
2170 case VENDOR4_FRU_FORMAT:
2171 {
2172 seq_printf(seq, "FRU Information:\n");
2173 seq_printf(seq,
2174 " FRU Number : "
2175 "%c%c%c%c%c%c%c%c\n",
2176 oemfru[0], oemfru[1], oemfru[2],
2177 oemfru[3], oemfru[4], oemfru[5],
2178 oemfru[6], oemfru[7]);
2179 seq_sprintf(seq,
2180 " Part Number : "
2181 "%c%c%c%c%c%c%c%c\n",
2182 oemfru[8], oemfru[9], oemfru[10],
2183 oemfru[11], oemfru[12], oemfru[13],
2184 oemfru[14], oemfru[15]);
2185 seq_printf(seq,
2186 " EC Level : "
2187 "%c%c%c%c%c%c%c%c\n",
2188 oemfru[16], oemfru[17], oemfru[18],
2189 oemfru[19], oemfru[20], oemfru[21],
2190 oemfru[22], oemfru[23]);
2191 break;
2192 }
2193
2194 default:
2195 break;
2196 }
2197 #endif
2198
2199 return 0;
2200 }
2201
2202 static int slic_debug_adapter_show(struct seq_file *seq, void *v)
2203 {
2204 struct adapter *adapter = seq->private;
2205 struct net_device *netdev = adapter->netdev;
2206
2207 seq_printf(seq, "info: interface : %s\n",
2208 adapter->netdev->name);
2209 seq_printf(seq, "info: status : %s\n",
2210 SLIC_LINKSTATE(adapter->linkstate));
2211 seq_printf(seq, "info: port : %d\n",
2212 adapter->physport);
2213 seq_printf(seq, "info: speed : %s\n",
2214 SLIC_SPEED(adapter->linkspeed));
2215 seq_printf(seq, "info: duplex : %s\n",
2216 SLIC_DUPLEX(adapter->linkduplex));
2217 seq_printf(seq, "info: irq : 0x%X\n",
2218 (uint) adapter->irq);
2219 seq_printf(seq, "info: Interrupt Agg Delay: %d usec\n",
2220 adapter->card->loadlevel_current);
2221 seq_printf(seq, "info: RcvQ max entries : %4.4X\n",
2222 SLIC_RCVQ_ENTRIES);
2223 seq_printf(seq, "info: RcvQ current : %4.4X\n",
2224 adapter->rcvqueue.count);
2225 seq_printf(seq, "rx stats: packets : %8.8lX\n",
2226 netdev->stats.rx_packets);
2227 seq_printf(seq, "rx stats: bytes : %8.8lX\n",
2228 netdev->stats.rx_bytes);
2229 seq_printf(seq, "rx stats: broadcasts : %8.8X\n",
2230 adapter->rcv_broadcasts);
2231 seq_printf(seq, "rx stats: multicasts : %8.8X\n",
2232 adapter->rcv_multicasts);
2233 seq_printf(seq, "rx stats: unicasts : %8.8X\n",
2234 adapter->rcv_unicasts);
2235 seq_printf(seq, "rx stats: errors : %8.8X\n",
2236 (u32) adapter->slic_stats.iface.rcv_errors);
2237 seq_printf(seq, "rx stats: Missed errors : %8.8X\n",
2238 (u32) adapter->slic_stats.iface.rcv_discards);
2239 seq_printf(seq, "rx stats: drops : %8.8X\n",
2240 (u32) adapter->rcv_drops);
2241 seq_printf(seq, "tx stats: packets : %8.8lX\n",
2242 netdev->stats.tx_packets);
2243 seq_printf(seq, "tx stats: bytes : %8.8lX\n",
2244 netdev->stats.tx_bytes);
2245 seq_printf(seq, "tx stats: errors : %8.8X\n",
2246 (u32) adapter->slic_stats.iface.xmt_errors);
2247 seq_printf(seq, "rx stats: multicasts : %8.8lX\n",
2248 netdev->stats.multicast);
2249 seq_printf(seq, "tx stats: collision errors : %8.8X\n",
2250 (u32) adapter->slic_stats.iface.xmit_collisions);
2251 seq_printf(seq, "perf: Max rcv frames/isr : %8.8X\n",
2252 adapter->max_isr_rcvs);
2253 seq_printf(seq, "perf: Rcv interrupt yields : %8.8X\n",
2254 adapter->rcv_interrupt_yields);
2255 seq_printf(seq, "perf: Max xmit complete/isr : %8.8X\n",
2256 adapter->max_isr_xmits);
2257 seq_printf(seq, "perf: error interrupts : %8.8X\n",
2258 adapter->error_interrupts);
2259 seq_printf(seq, "perf: error rmiss interrupts : %8.8X\n",
2260 adapter->error_rmiss_interrupts);
2261 seq_printf(seq, "perf: rcv interrupts : %8.8X\n",
2262 adapter->rcv_interrupts);
2263 seq_printf(seq, "perf: xmit interrupts : %8.8X\n",
2264 adapter->xmit_interrupts);
2265 seq_printf(seq, "perf: link event interrupts : %8.8X\n",
2266 adapter->linkevent_interrupts);
2267 seq_printf(seq, "perf: UPR interrupts : %8.8X\n",
2268 adapter->upr_interrupts);
2269 seq_printf(seq, "perf: interrupt count : %8.8X\n",
2270 adapter->num_isrs);
2271 seq_printf(seq, "perf: false interrupts : %8.8X\n",
2272 adapter->false_interrupts);
2273 seq_printf(seq, "perf: All register writes : %8.8X\n",
2274 adapter->all_reg_writes);
2275 seq_printf(seq, "perf: ICR register writes : %8.8X\n",
2276 adapter->icr_reg_writes);
2277 seq_printf(seq, "perf: ISR register writes : %8.8X\n",
2278 adapter->isr_reg_writes);
2279 seq_printf(seq, "ifevents: overflow 802 errors : %8.8X\n",
2280 adapter->if_events.oflow802);
2281 seq_printf(seq, "ifevents: transport overflow errors: %8.8X\n",
2282 adapter->if_events.Tprtoflow);
2283 seq_printf(seq, "ifevents: underflow errors : %8.8X\n",
2284 adapter->if_events.uflow802);
2285 seq_printf(seq, "ifevents: receive early : %8.8X\n",
2286 adapter->if_events.rcvearly);
2287 seq_printf(seq, "ifevents: buffer overflows : %8.8X\n",
2288 adapter->if_events.Bufov);
2289 seq_printf(seq, "ifevents: carrier errors : %8.8X\n",
2290 adapter->if_events.Carre);
2291 seq_printf(seq, "ifevents: Long : %8.8X\n",
2292 adapter->if_events.Longe);
2293 seq_printf(seq, "ifevents: invalid preambles : %8.8X\n",
2294 adapter->if_events.Invp);
2295 seq_printf(seq, "ifevents: CRC errors : %8.8X\n",
2296 adapter->if_events.Crc);
2297 seq_printf(seq, "ifevents: dribble nibbles : %8.8X\n",
2298 adapter->if_events.Drbl);
2299 seq_printf(seq, "ifevents: Code violations : %8.8X\n",
2300 adapter->if_events.Code);
2301 seq_printf(seq, "ifevents: TCP checksum errors : %8.8X\n",
2302 adapter->if_events.TpCsum);
2303 seq_printf(seq, "ifevents: TCP header short errors : %8.8X\n",
2304 adapter->if_events.TpHlen);
2305 seq_printf(seq, "ifevents: IP checksum errors : %8.8X\n",
2306 adapter->if_events.IpCsum);
2307 seq_printf(seq, "ifevents: IP frame incompletes : %8.8X\n",
2308 adapter->if_events.IpLen);
2309 seq_printf(seq, "ifevents: IP headers shorts : %8.8X\n",
2310 adapter->if_events.IpHlen);
2311
2312 return 0;
2313 }
2314 static int slic_debug_adapter_open(struct inode *inode, struct file *file)
2315 {
2316 return single_open(file, slic_debug_adapter_show, inode->i_private);
2317 }
2318
2319 static int slic_debug_card_open(struct inode *inode, struct file *file)
2320 {
2321 return single_open(file, slic_debug_card_show, inode->i_private);
2322 }
2323
2324 static const struct file_operations slic_debug_adapter_fops = {
2325 .owner = THIS_MODULE,
2326 .open = slic_debug_adapter_open,
2327 .read = seq_read,
2328 .llseek = seq_lseek,
2329 .release = single_release,
2330 };
2331
2332 static const struct file_operations slic_debug_card_fops = {
2333 .owner = THIS_MODULE,
2334 .open = slic_debug_card_open,
2335 .read = seq_read,
2336 .llseek = seq_lseek,
2337 .release = single_release,
2338 };
2339
2340 static void slic_debug_adapter_create(struct adapter *adapter)
2341 {
2342 struct dentry *d;
2343 char name[7];
2344 struct sliccard *card = adapter->card;
2345
2346 if (!card->debugfs_dir)
2347 return;
2348
2349 sprintf(name, "port%d", adapter->port);
2350 d = debugfs_create_file(name, S_IRUGO,
2351 card->debugfs_dir, adapter,
2352 &slic_debug_adapter_fops);
2353 if (!d || IS_ERR(d))
2354 pr_info(PFX "%s: debugfs create failed\n", name);
2355 else
2356 adapter->debugfs_entry = d;
2357 }
2358
2359 static void slic_debug_adapter_destroy(struct adapter *adapter)
2360 {
2361 debugfs_remove(adapter->debugfs_entry);
2362 adapter->debugfs_entry = NULL;
2363 }
2364
2365 static void slic_debug_card_create(struct sliccard *card)
2366 {
2367 struct dentry *d;
2368 char name[IFNAMSIZ];
2369
2370 snprintf(name, sizeof(name), "slic%d", card->cardnum);
2371 d = debugfs_create_dir(name, slic_debugfs);
2372 if (!d || IS_ERR(d))
2373 pr_info(PFX "%s: debugfs create dir failed\n",
2374 name);
2375 else {
2376 card->debugfs_dir = d;
2377 d = debugfs_create_file("cardinfo", S_IRUGO,
2378 slic_debugfs, card,
2379 &slic_debug_card_fops);
2380 if (!d || IS_ERR(d))
2381 pr_info(PFX "%s: debugfs create failed\n",
2382 name);
2383 else
2384 card->debugfs_cardinfo = d;
2385 }
2386 }
2387
2388 static void slic_debug_card_destroy(struct sliccard *card)
2389 {
2390 int i;
2391
2392 for (i = 0; i < card->card_size; i++) {
2393 struct adapter *adapter;
2394
2395 adapter = card->adapter[i];
2396 if (adapter)
2397 slic_debug_adapter_destroy(adapter);
2398 }
2399 if (card->debugfs_cardinfo) {
2400 debugfs_remove(card->debugfs_cardinfo);
2401 card->debugfs_cardinfo = NULL;
2402 }
2403 if (card->debugfs_dir) {
2404 debugfs_remove(card->debugfs_dir);
2405 card->debugfs_dir = NULL;
2406 }
2407 }
2408
2409 static void slic_debug_init(void)
2410 {
2411 struct dentry *ent;
2412
2413 ent = debugfs_create_dir("slic", NULL);
2414 if (!ent || IS_ERR(ent)) {
2415 pr_info(PFX "debugfs create directory failed\n");
2416 return;
2417 }
2418
2419 slic_debugfs = ent;
2420 }
2421
2422 static void slic_debug_cleanup(void)
2423 {
2424 if (slic_debugfs) {
2425 debugfs_remove(slic_debugfs);
2426 slic_debugfs = NULL;
2427 }
2428 }
2429
2430 /*
2431 * slic_link_event_handler -
2432 *
2433 * Initiate a link configuration sequence. The link configuration begins
2434 * by issuing a READ_LINK_STATUS command to the Utility Processor on the
2435 * SLIC. Since the command finishes asynchronously, the slic_upr_comlete
2436 * routine will follow it up witha UP configuration write command, which
2437 * will also complete asynchronously.
2438 *
2439 */
2440 static void slic_link_event_handler(struct adapter *adapter)
2441 {
2442 int status;
2443 struct slic_shmem *pshmem;
2444
2445 if (adapter->state != ADAPT_UP) {
2446 /* Adapter is not operational. Ignore. */
2447 return;
2448 }
2449
2450 pshmem = (struct slic_shmem *)adapter->phys_shmem;
2451
2452 #if BITS_PER_LONG == 64
2453 status = slic_upr_request(adapter,
2454 SLIC_UPR_RLSR,
2455 SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
2456 SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
2457 0, 0);
2458 #else
2459 status = slic_upr_request(adapter, SLIC_UPR_RLSR,
2460 (u32) &pshmem->linkstatus, /* no 4GB wrap guaranteed */
2461 0, 0, 0);
2462 #endif
2463 ASSERT(status == 0);
2464 }
2465
2466 static void slic_init_cleanup(struct adapter *adapter)
2467 {
2468 if (adapter->intrregistered) {
2469 adapter->intrregistered = 0;
2470 free_irq(adapter->netdev->irq, adapter->netdev);
2471
2472 }
2473 if (adapter->pshmem) {
2474 pci_free_consistent(adapter->pcidev,
2475 sizeof(struct slic_shmem),
2476 adapter->pshmem, adapter->phys_shmem);
2477 adapter->pshmem = NULL;
2478 adapter->phys_shmem = (dma_addr_t) NULL;
2479 }
2480
2481 if (adapter->pingtimerset) {
2482 adapter->pingtimerset = 0;
2483 del_timer(&adapter->pingtimer);
2484 }
2485
2486 slic_rspqueue_free(adapter);
2487 slic_cmdq_free(adapter);
2488 slic_rcvqueue_free(adapter);
2489 }
2490
2491 /*
2492 * Allocate a mcast_address structure to hold the multicast address.
2493 * Link it in.
2494 */
2495 static int slic_mcast_add_list(struct adapter *adapter, char *address)
2496 {
2497 struct mcast_address *mcaddr, *mlist;
2498
2499 /* Check to see if it already exists */
2500 mlist = adapter->mcastaddrs;
2501 while (mlist) {
2502 if (!compare_ether_addr(mlist->address, address))
2503 return 0;
2504 mlist = mlist->next;
2505 }
2506
2507 /* Doesn't already exist. Allocate a structure to hold it */
2508 mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
2509 if (mcaddr == NULL)
2510 return 1;
2511
2512 memcpy(mcaddr->address, address, 6);
2513
2514 mcaddr->next = adapter->mcastaddrs;
2515 adapter->mcastaddrs = mcaddr;
2516
2517 return 0;
2518 }
2519
2520 static void slic_mcast_set_list(struct net_device *dev)
2521 {
2522 struct adapter *adapter = netdev_priv(dev);
2523 int status = 0;
2524 char *addresses;
2525 struct netdev_hw_addr *ha;
2526
2527 ASSERT(adapter);
2528
2529 netdev_for_each_mc_addr(ha, dev) {
2530 addresses = (char *) &ha->addr;
2531 status = slic_mcast_add_list(adapter, addresses);
2532 if (status != 0)
2533 break;
2534 slic_mcast_set_bit(adapter, addresses);
2535 }
2536
2537 if (adapter->devflags_prev != dev->flags) {
2538 adapter->macopts = MAC_DIRECTED;
2539 if (dev->flags) {
2540 if (dev->flags & IFF_BROADCAST)
2541 adapter->macopts |= MAC_BCAST;
2542 if (dev->flags & IFF_PROMISC)
2543 adapter->macopts |= MAC_PROMISC;
2544 if (dev->flags & IFF_ALLMULTI)
2545 adapter->macopts |= MAC_ALLMCAST;
2546 if (dev->flags & IFF_MULTICAST)
2547 adapter->macopts |= MAC_MCAST;
2548 }
2549 adapter->devflags_prev = dev->flags;
2550 slic_config_set(adapter, true);
2551 } else {
2552 if (status == 0)
2553 slic_mcast_set_mask(adapter);
2554 }
2555 return;
2556 }
2557
2558 #define XMIT_FAIL_LINK_STATE 1
2559 #define XMIT_FAIL_ZERO_LENGTH 2
2560 #define XMIT_FAIL_HOSTCMD_FAIL 3
2561
2562 static void slic_xmit_build_request(struct adapter *adapter,
2563 struct slic_hostcmd *hcmd, struct sk_buff *skb)
2564 {
2565 struct slic_host64_cmd *ihcmd;
2566 ulong phys_addr;
2567
2568 ihcmd = &hcmd->cmd64;
2569
2570 ihcmd->flags = (adapter->port << IHFLG_IFSHFT);
2571 ihcmd->command = IHCMD_XMT_REQ;
2572 ihcmd->u.slic_buffers.totlen = skb->len;
2573 phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
2574 PCI_DMA_TODEVICE);
2575 ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
2576 ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
2577 ihcmd->u.slic_buffers.bufs[0].length = skb->len;
2578 #if BITS_PER_LONG == 64
2579 hcmd->cmdsize = (u32) ((((u64)&ihcmd->u.slic_buffers.bufs[1] -
2580 (u64) hcmd) + 31) >> 5);
2581 #else
2582 hcmd->cmdsize = ((((u32) &ihcmd->u.slic_buffers.bufs[1] -
2583 (u32) hcmd) + 31) >> 5);
2584 #endif
2585 }
2586
2587 static void slic_xmit_fail(struct adapter *adapter,
2588 struct sk_buff *skb,
2589 void *cmd, u32 skbtype, u32 status)
2590 {
2591 if (adapter->xmitq_full)
2592 netif_stop_queue(adapter->netdev);
2593 if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
2594 switch (status) {
2595 case XMIT_FAIL_LINK_STATE:
2596 dev_err(&adapter->netdev->dev,
2597 "reject xmit skb[%p: %x] linkstate[%s] "
2598 "adapter[%s:%d] card[%s:%d]\n",
2599 skb, skb->pkt_type,
2600 SLIC_LINKSTATE(adapter->linkstate),
2601 SLIC_ADAPTER_STATE(adapter->state),
2602 adapter->state,
2603 SLIC_CARD_STATE(adapter->card->state),
2604 adapter->card->state);
2605 break;
2606 case XMIT_FAIL_ZERO_LENGTH:
2607 dev_err(&adapter->netdev->dev,
2608 "xmit_start skb->len == 0 skb[%p] type[%x]\n",
2609 skb, skb->pkt_type);
2610 break;
2611 case XMIT_FAIL_HOSTCMD_FAIL:
2612 dev_err(&adapter->netdev->dev,
2613 "xmit_start skb[%p] type[%x] No host commands "
2614 "available\n", skb, skb->pkt_type);
2615 break;
2616 default:
2617 ASSERT(0);
2618 }
2619 }
2620 dev_kfree_skb(skb);
2621 adapter->netdev->stats.tx_dropped++;
2622 }
2623
2624 static void slic_rcv_handle_error(struct adapter *adapter,
2625 struct slic_rcvbuf *rcvbuf)
2626 {
2627 struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
2628 struct net_device *netdev = adapter->netdev;
2629
2630 if (adapter->devid != SLIC_1GB_DEVICE_ID) {
2631 if (hdr->frame_status14 & VRHSTAT_802OE)
2632 adapter->if_events.oflow802++;
2633 if (hdr->frame_status14 & VRHSTAT_TPOFLO)
2634 adapter->if_events.Tprtoflow++;
2635 if (hdr->frame_status_b14 & VRHSTATB_802UE)
2636 adapter->if_events.uflow802++;
2637 if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
2638 adapter->if_events.rcvearly++;
2639 netdev->stats.rx_fifo_errors++;
2640 }
2641 if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
2642 adapter->if_events.Bufov++;
2643 netdev->stats.rx_over_errors++;
2644 }
2645 if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
2646 adapter->if_events.Carre++;
2647 netdev->stats.tx_carrier_errors++;
2648 }
2649 if (hdr->frame_status_b14 & VRHSTATB_LONGE)
2650 adapter->if_events.Longe++;
2651 if (hdr->frame_status_b14 & VRHSTATB_PREA)
2652 adapter->if_events.Invp++;
2653 if (hdr->frame_status_b14 & VRHSTATB_CRC) {
2654 adapter->if_events.Crc++;
2655 netdev->stats.rx_crc_errors++;
2656 }
2657 if (hdr->frame_status_b14 & VRHSTATB_DRBL)
2658 adapter->if_events.Drbl++;
2659 if (hdr->frame_status_b14 & VRHSTATB_CODE)
2660 adapter->if_events.Code++;
2661 if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
2662 adapter->if_events.TpCsum++;
2663 if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
2664 adapter->if_events.TpHlen++;
2665 if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
2666 adapter->if_events.IpCsum++;
2667 if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
2668 adapter->if_events.IpLen++;
2669 if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
2670 adapter->if_events.IpHlen++;
2671 } else {
2672 if (hdr->frame_statusGB & VGBSTAT_XPERR) {
2673 u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
2674
2675 if (xerr == VGBSTAT_XCSERR)
2676 adapter->if_events.TpCsum++;
2677 if (xerr == VGBSTAT_XUFLOW)
2678 adapter->if_events.Tprtoflow++;
2679 if (xerr == VGBSTAT_XHLEN)
2680 adapter->if_events.TpHlen++;
2681 }
2682 if (hdr->frame_statusGB & VGBSTAT_NETERR) {
2683 u32 nerr =
2684 (hdr->
2685 frame_statusGB >> VGBSTAT_NERRSHFT) &
2686 VGBSTAT_NERRMSK;
2687 if (nerr == VGBSTAT_NCSERR)
2688 adapter->if_events.IpCsum++;
2689 if (nerr == VGBSTAT_NUFLOW)
2690 adapter->if_events.IpLen++;
2691 if (nerr == VGBSTAT_NHLEN)
2692 adapter->if_events.IpHlen++;
2693 }
2694 if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
2695 u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
2696
2697 if (lerr == VGBSTAT_LDEARLY)
2698 adapter->if_events.rcvearly++;
2699 if (lerr == VGBSTAT_LBOFLO)
2700 adapter->if_events.Bufov++;
2701 if (lerr == VGBSTAT_LCODERR)
2702 adapter->if_events.Code++;
2703 if (lerr == VGBSTAT_LDBLNBL)
2704 adapter->if_events.Drbl++;
2705 if (lerr == VGBSTAT_LCRCERR)
2706 adapter->if_events.Crc++;
2707 if (lerr == VGBSTAT_LOFLO)
2708 adapter->if_events.oflow802++;
2709 if (lerr == VGBSTAT_LUFLO)
2710 adapter->if_events.uflow802++;
2711 }
2712 }
2713 return;
2714 }
2715
2716 #define TCP_OFFLOAD_FRAME_PUSHFLAG 0x10000000
2717 #define M_FAST_PATH 0x0040
2718
2719 static void slic_rcv_handler(struct adapter *adapter)
2720 {
2721 struct net_device *netdev = adapter->netdev;
2722 struct sk_buff *skb;
2723 struct slic_rcvbuf *rcvbuf;
2724 u32 frames = 0;
2725
2726 while ((skb = slic_rcvqueue_getnext(adapter))) {
2727 u32 rx_bytes;
2728
2729 ASSERT(skb->head);
2730 rcvbuf = (struct slic_rcvbuf *)skb->head;
2731 adapter->card->events++;
2732 if (rcvbuf->status & IRHDDR_ERR) {
2733 adapter->rx_errors++;
2734 slic_rcv_handle_error(adapter, rcvbuf);
2735 slic_rcvqueue_reinsert(adapter, skb);
2736 continue;
2737 }
2738
2739 if (!slic_mac_filter(adapter, (struct ether_header *)
2740 rcvbuf->data)) {
2741 slic_rcvqueue_reinsert(adapter, skb);
2742 continue;
2743 }
2744 skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
2745 rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
2746 skb_put(skb, rx_bytes);
2747 netdev->stats.rx_packets++;
2748 netdev->stats.rx_bytes += rx_bytes;
2749 #if SLIC_OFFLOAD_IP_CHECKSUM
2750 skb->ip_summed = CHECKSUM_UNNECESSARY;
2751 #endif
2752
2753 skb->dev = adapter->netdev;
2754 skb->protocol = eth_type_trans(skb, skb->dev);
2755 netif_rx(skb);
2756
2757 ++frames;
2758 #if SLIC_INTERRUPT_PROCESS_LIMIT
2759 if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
2760 adapter->rcv_interrupt_yields++;
2761 break;
2762 }
2763 #endif
2764 }
2765 adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
2766 }
2767
2768 static void slic_xmit_complete(struct adapter *adapter)
2769 {
2770 struct slic_hostcmd *hcmd;
2771 struct slic_rspbuf *rspbuf;
2772 u32 frames = 0;
2773 struct slic_handle_word slic_handle_word;
2774
2775 do {
2776 rspbuf = slic_rspqueue_getnext(adapter);
2777 if (!rspbuf)
2778 break;
2779 adapter->xmit_completes++;
2780 adapter->card->events++;
2781 /*
2782 Get the complete host command buffer
2783 */
2784 slic_handle_word.handle_token = rspbuf->hosthandle;
2785 ASSERT(slic_handle_word.handle_index);
2786 ASSERT(slic_handle_word.handle_index <= SLIC_CMDQ_MAXCMDS);
2787 hcmd =
2788 (struct slic_hostcmd *)
2789 adapter->slic_handles[slic_handle_word.handle_index].
2790 address;
2791 /* hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
2792 ASSERT(hcmd);
2793 ASSERT(hcmd->pslic_handle ==
2794 &adapter->slic_handles[slic_handle_word.handle_index]);
2795 if (hcmd->type == SLIC_CMD_DUMB) {
2796 if (hcmd->skb)
2797 dev_kfree_skb_irq(hcmd->skb);
2798 slic_cmdq_putdone_irq(adapter, hcmd);
2799 }
2800 rspbuf->status = 0;
2801 rspbuf->hosthandle = 0;
2802 frames++;
2803 } while (1);
2804 adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
2805 }
2806
2807 static irqreturn_t slic_interrupt(int irq, void *dev_id)
2808 {
2809 struct net_device *dev = (struct net_device *)dev_id;
2810 struct adapter *adapter = netdev_priv(dev);
2811 u32 isr;
2812
2813 if ((adapter->pshmem) && (adapter->pshmem->isr)) {
2814 slic_reg32_write(&adapter->slic_regs->slic_icr,
2815 ICR_INT_MASK, FLUSH);
2816 isr = adapter->isrcopy = adapter->pshmem->isr;
2817 adapter->pshmem->isr = 0;
2818 adapter->num_isrs++;
2819 switch (adapter->card->state) {
2820 case CARD_UP:
2821 if (isr & ~ISR_IO) {
2822 if (isr & ISR_ERR) {
2823 adapter->error_interrupts++;
2824 if (isr & ISR_RMISS) {
2825 int count;
2826 int pre_count;
2827 int errors;
2828
2829 struct slic_rcvqueue *rcvq =
2830 &adapter->rcvqueue;
2831
2832 adapter->
2833 error_rmiss_interrupts++;
2834 if (!rcvq->errors)
2835 rcv_count = rcvq->count;
2836 pre_count = rcvq->count;
2837 errors = rcvq->errors;
2838
2839 while (rcvq->count <
2840 SLIC_RCVQ_FILLTHRESH) {
2841 count =
2842 slic_rcvqueue_fill
2843 (adapter);
2844 if (!count)
2845 break;
2846 }
2847 } else if (isr & ISR_XDROP) {
2848 dev_err(&dev->dev,
2849 "isr & ISR_ERR [%x] "
2850 "ISR_XDROP \n", isr);
2851 } else {
2852 dev_err(&dev->dev,
2853 "isr & ISR_ERR [%x]\n",
2854 isr);
2855 }
2856 }
2857
2858 if (isr & ISR_LEVENT) {
2859 adapter->linkevent_interrupts++;
2860 slic_link_event_handler(adapter);
2861 }
2862
2863 if ((isr & ISR_UPC) ||
2864 (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
2865 adapter->upr_interrupts++;
2866 slic_upr_request_complete(adapter, isr);
2867 }
2868 }
2869
2870 if (isr & ISR_RCV) {
2871 adapter->rcv_interrupts++;
2872 slic_rcv_handler(adapter);
2873 }
2874
2875 if (isr & ISR_CMD) {
2876 adapter->xmit_interrupts++;
2877 slic_xmit_complete(adapter);
2878 }
2879 break;
2880
2881 case CARD_DOWN:
2882 if ((isr & ISR_UPC) ||
2883 (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
2884 adapter->upr_interrupts++;
2885 slic_upr_request_complete(adapter, isr);
2886 }
2887 break;
2888
2889 default:
2890 break;
2891 }
2892
2893 adapter->isrcopy = 0;
2894 adapter->all_reg_writes += 2;
2895 adapter->isr_reg_writes++;
2896 slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
2897 } else {
2898 adapter->false_interrupts++;
2899 }
2900 return IRQ_HANDLED;
2901 }
2902
2903 #define NORMAL_ETHFRAME 0
2904
2905 static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
2906 {
2907 struct sliccard *card;
2908 struct adapter *adapter = netdev_priv(dev);
2909 struct slic_hostcmd *hcmd = NULL;
2910 u32 status = 0;
2911 u32 skbtype = NORMAL_ETHFRAME;
2912 void *offloadcmd = NULL;
2913
2914 card = adapter->card;
2915 ASSERT(card);
2916 if ((adapter->linkstate != LINK_UP) ||
2917 (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
2918 status = XMIT_FAIL_LINK_STATE;
2919 goto xmit_fail;
2920
2921 } else if (skb->len == 0) {
2922 status = XMIT_FAIL_ZERO_LENGTH;
2923 goto xmit_fail;
2924 }
2925
2926 if (skbtype == NORMAL_ETHFRAME) {
2927 hcmd = slic_cmdq_getfree(adapter);
2928 if (!hcmd) {
2929 adapter->xmitq_full = 1;
2930 status = XMIT_FAIL_HOSTCMD_FAIL;
2931 goto xmit_fail;
2932 }
2933 ASSERT(hcmd->pslic_handle);
2934 ASSERT(hcmd->cmd64.hosthandle ==
2935 hcmd->pslic_handle->token.handle_token);
2936 hcmd->skb = skb;
2937 hcmd->busy = 1;
2938 hcmd->type = SLIC_CMD_DUMB;
2939 if (skbtype == NORMAL_ETHFRAME)
2940 slic_xmit_build_request(adapter, hcmd, skb);
2941 }
2942 dev->stats.tx_packets++;
2943 dev->stats.tx_bytes += skb->len;
2944
2945 #ifdef DEBUG_DUMP
2946 if (adapter->kill_card) {
2947 struct slic_host64_cmd ihcmd;
2948
2949 ihcmd = &hcmd->cmd64;
2950
2951 ihcmd->flags |= 0x40;
2952 adapter->kill_card = 0; /* only do this once */
2953 }
2954 #endif
2955 if (hcmd->paddrh == 0) {
2956 slic_reg32_write(&adapter->slic_regs->slic_cbar,
2957 (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
2958 } else {
2959 slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
2960 (hcmd->paddrl | hcmd->cmdsize),
2961 &adapter->slic_regs->slic_addr_upper,
2962 hcmd->paddrh, DONT_FLUSH);
2963 }
2964 xmit_done:
2965 return NETDEV_TX_OK;
2966 xmit_fail:
2967 slic_xmit_fail(adapter, skb, offloadcmd, skbtype, status);
2968 goto xmit_done;
2969 }
2970
2971
2972 static void slic_adapter_freeresources(struct adapter *adapter)
2973 {
2974 slic_init_cleanup(adapter);
2975 adapter->error_interrupts = 0;
2976 adapter->rcv_interrupts = 0;
2977 adapter->xmit_interrupts = 0;
2978 adapter->linkevent_interrupts = 0;
2979 adapter->upr_interrupts = 0;
2980 adapter->num_isrs = 0;
2981 adapter->xmit_completes = 0;
2982 adapter->rcv_broadcasts = 0;
2983 adapter->rcv_multicasts = 0;
2984 adapter->rcv_unicasts = 0;
2985 }
2986
2987 static int slic_adapter_allocresources(struct adapter *adapter)
2988 {
2989 if (!adapter->intrregistered) {
2990 int retval;
2991
2992 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2993 slic_global.driver_lock.flags);
2994
2995 retval = request_irq(adapter->netdev->irq,
2996 &slic_interrupt,
2997 IRQF_SHARED,
2998 adapter->netdev->name, adapter->netdev);
2999
3000 spin_lock_irqsave(&slic_global.driver_lock.lock,
3001 slic_global.driver_lock.flags);
3002
3003 if (retval) {
3004 dev_err(&adapter->netdev->dev,
3005 "request_irq (%s) FAILED [%x]\n",
3006 adapter->netdev->name, retval);
3007 return retval;
3008 }
3009 adapter->intrregistered = 1;
3010 }
3011 return 0;
3012 }
3013
3014 /*
3015 * slic_if_init
3016 *
3017 * Perform initialization of our slic interface.
3018 *
3019 */
3020 static int slic_if_init(struct adapter *adapter)
3021 {
3022 struct sliccard *card = adapter->card;
3023 struct net_device *dev = adapter->netdev;
3024 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
3025 struct slic_shmem *pshmem;
3026 int rc;
3027
3028 ASSERT(card);
3029
3030 /* adapter should be down at this point */
3031 if (adapter->state != ADAPT_DOWN) {
3032 dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
3033 __func__);
3034 rc = -EIO;
3035 goto err;
3036 }
3037 ASSERT(adapter->linkstate == LINK_DOWN);
3038
3039 adapter->devflags_prev = dev->flags;
3040 adapter->macopts = MAC_DIRECTED;
3041 if (dev->flags) {
3042 if (dev->flags & IFF_BROADCAST)
3043 adapter->macopts |= MAC_BCAST;
3044 if (dev->flags & IFF_PROMISC)
3045 adapter->macopts |= MAC_PROMISC;
3046 if (dev->flags & IFF_ALLMULTI)
3047 adapter->macopts |= MAC_ALLMCAST;
3048 if (dev->flags & IFF_MULTICAST)
3049 adapter->macopts |= MAC_MCAST;
3050 }
3051 rc = slic_adapter_allocresources(adapter);
3052 if (rc) {
3053 dev_err(&dev->dev,
3054 "%s: slic_adapter_allocresources FAILED %x\n",
3055 __func__, rc);
3056 slic_adapter_freeresources(adapter);
3057 goto err;
3058 }
3059
3060 if (!adapter->queues_initialized) {
3061 if ((rc = slic_rspqueue_init(adapter)))
3062 goto err;
3063 if ((rc = slic_cmdq_init(adapter)))
3064 goto err;
3065 if ((rc = slic_rcvqueue_init(adapter)))
3066 goto err;
3067 adapter->queues_initialized = 1;
3068 }
3069
3070 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
3071 mdelay(1);
3072
3073 if (!adapter->isp_initialized) {
3074 pshmem = (struct slic_shmem *)adapter->phys_shmem;
3075
3076 spin_lock_irqsave(&adapter->bit64reglock.lock,
3077 adapter->bit64reglock.flags);
3078
3079 #if BITS_PER_LONG == 64
3080 slic_reg32_write(&slic_regs->slic_addr_upper,
3081 SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
3082 slic_reg32_write(&slic_regs->slic_isp,
3083 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
3084 #else
3085 slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
3086 slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
3087 #endif
3088 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
3089 adapter->bit64reglock.flags);
3090 adapter->isp_initialized = 1;
3091 }
3092
3093 adapter->state = ADAPT_UP;
3094 if (!card->loadtimerset) {
3095 init_timer(&card->loadtimer);
3096 card->loadtimer.expires =
3097 jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
3098 card->loadtimer.data = (ulong) card;
3099 card->loadtimer.function = &slic_timer_load_check;
3100 add_timer(&card->loadtimer);
3101
3102 card->loadtimerset = 1;
3103 }
3104
3105 if (!adapter->pingtimerset) {
3106 init_timer(&adapter->pingtimer);
3107 adapter->pingtimer.expires =
3108 jiffies + (PING_TIMER_INTERVAL * HZ);
3109 adapter->pingtimer.data = (ulong) dev;
3110 adapter->pingtimer.function = &slic_timer_ping;
3111 add_timer(&adapter->pingtimer);
3112 adapter->pingtimerset = 1;
3113 adapter->card->pingstatus = ISR_PINGMASK;
3114 }
3115
3116 /*
3117 * clear any pending events, then enable interrupts
3118 */
3119 adapter->isrcopy = 0;
3120 adapter->pshmem->isr = 0;
3121 slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
3122 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
3123
3124 slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
3125 slic_link_event_handler(adapter);
3126
3127 err:
3128 return rc;
3129 }
3130
3131 static int slic_entry_open(struct net_device *dev)
3132 {
3133 struct adapter *adapter = netdev_priv(dev);
3134 struct sliccard *card = adapter->card;
3135 u32 locked = 0;
3136 int status;
3137
3138 ASSERT(adapter);
3139 ASSERT(card);
3140
3141 netif_stop_queue(adapter->netdev);
3142
3143 spin_lock_irqsave(&slic_global.driver_lock.lock,
3144 slic_global.driver_lock.flags);
3145 locked = 1;
3146 if (!adapter->activated) {
3147 card->adapters_activated++;
3148 slic_global.num_slic_ports_active++;
3149 adapter->activated = 1;
3150 }
3151 status = slic_if_init(adapter);
3152
3153 if (status != 0) {
3154 if (adapter->activated) {
3155 card->adapters_activated--;
3156 slic_global.num_slic_ports_active--;
3157 adapter->activated = 0;
3158 }
3159 if (locked) {
3160 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
3161 slic_global.driver_lock.flags);
3162 locked = 0;
3163 }
3164 return status;
3165 }
3166 if (!card->master)
3167 card->master = adapter;
3168
3169 if (locked) {
3170 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
3171 slic_global.driver_lock.flags);
3172 locked = 0;
3173 }
3174
3175 return 0;
3176 }
3177
3178 static void slic_card_cleanup(struct sliccard *card)
3179 {
3180 if (card->loadtimerset) {
3181 card->loadtimerset = 0;
3182 del_timer(&card->loadtimer);
3183 }
3184
3185 slic_debug_card_destroy(card);
3186
3187 kfree(card);
3188 }
3189
3190 static void __devexit slic_entry_remove(struct pci_dev *pcidev)
3191 {
3192 struct net_device *dev = pci_get_drvdata(pcidev);
3193 u32 mmio_start = 0;
3194 uint mmio_len = 0;
3195 struct adapter *adapter = netdev_priv(dev);
3196 struct sliccard *card;
3197 struct mcast_address *mcaddr, *mlist;
3198
3199 ASSERT(adapter);
3200 slic_adapter_freeresources(adapter);
3201 slic_unmap_mmio_space(adapter);
3202 unregister_netdev(dev);
3203
3204 mmio_start = pci_resource_start(pcidev, 0);
3205 mmio_len = pci_resource_len(pcidev, 0);
3206
3207 release_mem_region(mmio_start, mmio_len);
3208
3209 iounmap((void __iomem *)dev->base_addr);
3210 /* free multicast addresses */
3211 mlist = adapter->mcastaddrs;
3212 while (mlist) {
3213 mcaddr = mlist;
3214 mlist = mlist->next;
3215 kfree(mcaddr);
3216 }
3217 ASSERT(adapter->card);
3218 card = adapter->card;
3219 ASSERT(card->adapters_allocated);
3220 card->adapters_allocated--;
3221 adapter->allocated = 0;
3222 if (!card->adapters_allocated) {
3223 struct sliccard *curr_card = slic_global.slic_card;
3224 if (curr_card == card) {
3225 slic_global.slic_card = card->next;
3226 } else {
3227 while (curr_card->next != card)
3228 curr_card = curr_card->next;
3229 ASSERT(curr_card);
3230 curr_card->next = card->next;
3231 }
3232 ASSERT(slic_global.num_slic_cards);
3233 slic_global.num_slic_cards--;
3234 slic_card_cleanup(card);
3235 }
3236 free_netdev(dev);
3237 pci_release_regions(pcidev);
3238 }
3239
3240 static int slic_entry_halt(struct net_device *dev)
3241 {
3242 struct adapter *adapter = netdev_priv(dev);
3243 struct sliccard *card = adapter->card;
3244 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
3245
3246 spin_lock_irqsave(&slic_global.driver_lock.lock,
3247 slic_global.driver_lock.flags);
3248 ASSERT(card);
3249 netif_stop_queue(adapter->netdev);
3250 adapter->state = ADAPT_DOWN;
3251 adapter->linkstate = LINK_DOWN;
3252 adapter->upr_list = NULL;
3253 adapter->upr_busy = 0;
3254 adapter->devflags_prev = 0;
3255 ASSERT(card->adapter[adapter->cardindex] == adapter);
3256 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
3257 adapter->all_reg_writes++;
3258 adapter->icr_reg_writes++;
3259 slic_config_clear(adapter);
3260 if (adapter->activated) {
3261 card->adapters_activated--;
3262 slic_global.num_slic_ports_active--;
3263 adapter->activated = 0;
3264 }
3265 #ifdef AUTOMATIC_RESET
3266 slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
3267 #endif
3268 /*
3269 * Reset the adapter's cmd queues
3270 */
3271 slic_cmdq_reset(adapter);
3272
3273 #ifdef AUTOMATIC_RESET
3274 if (!card->adapters_activated)
3275 slic_card_init(card, adapter);
3276 #endif
3277
3278 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
3279 slic_global.driver_lock.flags);
3280 return 0;
3281 }
3282
3283 static struct net_device_stats *slic_get_stats(struct net_device *dev)
3284 {
3285 struct adapter *adapter = netdev_priv(dev);
3286
3287 ASSERT(adapter);
3288 dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
3289 dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
3290 dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
3291 dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
3292 dev->stats.tx_heartbeat_errors = 0;
3293 dev->stats.tx_aborted_errors = 0;
3294 dev->stats.tx_window_errors = 0;
3295 dev->stats.tx_fifo_errors = 0;
3296 dev->stats.rx_frame_errors = 0;
3297 dev->stats.rx_length_errors = 0;
3298
3299 return &dev->stats;
3300 }
3301
3302 static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
3303 {
3304 struct adapter *adapter = netdev_priv(dev);
3305 struct ethtool_cmd edata;
3306 struct ethtool_cmd ecmd;
3307 u32 data[7];
3308 u32 intagg;
3309
3310 ASSERT(rq);
3311 switch (cmd) {
3312 case SIOCSLICSETINTAGG:
3313 if (copy_from_user(data, rq->ifr_data, 28))
3314 return -EFAULT;
3315 intagg = data[0];
3316 dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
3317 __func__, intagg);
3318 slic_intagg_set(adapter, intagg);
3319 return 0;
3320
3321 #ifdef SLIC_TRACE_DUMP_ENABLED
3322 case SIOCSLICTRACEDUMP:
3323 {
3324 u32 value;
3325 DBG_IOCTL("slic_ioctl SIOCSLIC_TRACE_DUMP\n");
3326
3327 if (copy_from_user(data, rq->ifr_data, 28)) {
3328 PRINT_ERROR
3329 ("slic: copy_from_user FAILED getting initial simba param\n");
3330 return -EFAULT;
3331 }
3332
3333 value = data[0];
3334 if (tracemon_request == SLIC_DUMP_DONE) {
3335 PRINT_ERROR
3336 ("ATK Diagnostic Trace Dump Requested\n");
3337 tracemon_request = SLIC_DUMP_REQUESTED;
3338 tracemon_request_type = value;
3339 tracemon_timestamp = jiffies;
3340 } else if ((tracemon_request == SLIC_DUMP_REQUESTED) ||
3341 (tracemon_request ==
3342 SLIC_DUMP_IN_PROGRESS)) {
3343 PRINT_ERROR
3344 ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
3345 } else {
3346 PRINT_ERROR
3347 ("ATK Diagnostic Trace Dump Requested\n");
3348 tracemon_request = SLIC_DUMP_REQUESTED;
3349 tracemon_request_type = value;
3350 tracemon_timestamp = jiffies;
3351 }
3352 return 0;
3353 }
3354 #endif
3355 case SIOCETHTOOL:
3356 ASSERT(adapter);
3357 if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
3358 return -EFAULT;
3359
3360 if (ecmd.cmd == ETHTOOL_GSET) {
3361 edata.supported = (SUPPORTED_10baseT_Half |
3362 SUPPORTED_10baseT_Full |
3363 SUPPORTED_100baseT_Half |
3364 SUPPORTED_100baseT_Full |
3365 SUPPORTED_Autoneg | SUPPORTED_MII);
3366 edata.port = PORT_MII;
3367 edata.transceiver = XCVR_INTERNAL;
3368 edata.phy_address = 0;
3369 if (adapter->linkspeed == LINK_100MB)
3370 edata.speed = SPEED_100;
3371 else if (adapter->linkspeed == LINK_10MB)
3372 edata.speed = SPEED_10;
3373 else
3374 edata.speed = 0;
3375
3376 if (adapter->linkduplex == LINK_FULLD)
3377 edata.duplex = DUPLEX_FULL;
3378 else
3379 edata.duplex = DUPLEX_HALF;
3380
3381 edata.autoneg = AUTONEG_ENABLE;
3382 edata.maxtxpkt = 1;
3383 edata.maxrxpkt = 1;
3384 if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
3385 return -EFAULT;
3386
3387 } else if (ecmd.cmd == ETHTOOL_SSET) {
3388 if (!capable(CAP_NET_ADMIN))
3389 return -EPERM;
3390
3391 if (adapter->linkspeed == LINK_100MB)
3392 edata.speed = SPEED_100;
3393 else if (adapter->linkspeed == LINK_10MB)
3394 edata.speed = SPEED_10;
3395 else
3396 edata.speed = 0;
3397
3398 if (adapter->linkduplex == LINK_FULLD)
3399 edata.duplex = DUPLEX_FULL;
3400 else
3401 edata.duplex = DUPLEX_HALF;
3402
3403 edata.autoneg = AUTONEG_ENABLE;
3404 edata.maxtxpkt = 1;
3405 edata.maxrxpkt = 1;
3406 if ((ecmd.speed != edata.speed) ||
3407 (ecmd.duplex != edata.duplex)) {
3408 u32 speed;
3409 u32 duplex;
3410
3411 if (ecmd.speed == SPEED_10)
3412 speed = 0;
3413 else
3414 speed = PCR_SPEED_100;
3415 if (ecmd.duplex == DUPLEX_FULL)
3416 duplex = PCR_DUPLEX_FULL;
3417 else
3418 duplex = 0;
3419 slic_link_config(adapter, speed, duplex);
3420 slic_link_event_handler(adapter);
3421 }
3422 }
3423 return 0;
3424 default:
3425 return -EOPNOTSUPP;
3426 }
3427 }
3428
3429 static void slic_config_pci(struct pci_dev *pcidev)
3430 {
3431 u16 pci_command;
3432 u16 new_command;
3433
3434 pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
3435
3436 new_command = pci_command | PCI_COMMAND_MASTER
3437 | PCI_COMMAND_MEMORY
3438 | PCI_COMMAND_INVALIDATE
3439 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
3440 if (pci_command != new_command)
3441 pci_write_config_word(pcidev, PCI_COMMAND, new_command);
3442 }
3443
3444 static int slic_card_init(struct sliccard *card, struct adapter *adapter)
3445 {
3446 __iomem struct slic_regs *slic_regs = adapter->slic_regs;
3447 struct slic_eeprom *peeprom;
3448 struct oslic_eeprom *pOeeprom;
3449 dma_addr_t phys_config;
3450 u32 phys_configh;
3451 u32 phys_configl;
3452 u32 i = 0;
3453 struct slic_shmem *pshmem;
3454 int status;
3455 uint macaddrs = card->card_size;
3456 ushort eecodesize;
3457 ushort dramsize;
3458 ushort ee_chksum;
3459 ushort calc_chksum;
3460 struct slic_config_mac *pmac;
3461 unsigned char fruformat;
3462 unsigned char oemfruformat;
3463 struct atk_fru *patkfru;
3464 union oemfru *poemfru;
3465
3466 /* Reset everything except PCI configuration space */
3467 slic_soft_reset(adapter);
3468
3469 /* Download the microcode */
3470 status = slic_card_download(adapter);
3471
3472 if (status != 0) {
3473 dev_err(&adapter->pcidev->dev,
3474 "download failed bus %d slot %d\n",
3475 adapter->busnumber, adapter->slotnumber);
3476 return status;
3477 }
3478
3479 if (!card->config_set) {
3480 peeprom = pci_alloc_consistent(adapter->pcidev,
3481 sizeof(struct slic_eeprom),
3482 &phys_config);
3483
3484 phys_configl = SLIC_GET_ADDR_LOW(phys_config);
3485 phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
3486
3487 if (!peeprom) {
3488 dev_err(&adapter->pcidev->dev,
3489 "eeprom read failed to get memory "
3490 "bus %d slot %d\n", adapter->busnumber,
3491 adapter->slotnumber);
3492 return -ENOMEM;
3493 } else {
3494 memset(peeprom, 0, sizeof(struct slic_eeprom));
3495 }
3496 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
3497 mdelay(1);
3498 pshmem = (struct slic_shmem *)adapter->phys_shmem;
3499
3500 spin_lock_irqsave(&adapter->bit64reglock.lock,
3501 adapter->bit64reglock.flags);
3502 slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
3503 slic_reg32_write(&slic_regs->slic_isp,
3504 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
3505 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
3506 adapter->bit64reglock.flags);
3507
3508 slic_config_get(adapter, phys_configl, phys_configh);
3509
3510 for (;;) {
3511 if (adapter->pshmem->isr) {
3512 if (adapter->pshmem->isr & ISR_UPC) {
3513 adapter->pshmem->isr = 0;
3514 slic_reg64_write(adapter,
3515 &slic_regs->slic_isp, 0,
3516 &slic_regs->slic_addr_upper,
3517 0, FLUSH);
3518 slic_reg32_write(&slic_regs->slic_isr,
3519 0, FLUSH);
3520
3521 slic_upr_request_complete(adapter, 0);
3522 break;
3523 } else {
3524 adapter->pshmem->isr = 0;
3525 slic_reg32_write(&slic_regs->slic_isr,
3526 0, FLUSH);
3527 }
3528 } else {
3529 mdelay(1);
3530 i++;
3531 if (i > 5000) {
3532 dev_err(&adapter->pcidev->dev,
3533 "%d config data fetch timed out!\n",
3534 adapter->port);
3535 slic_reg64_write(adapter,
3536 &slic_regs->slic_isp, 0,
3537 &slic_regs->slic_addr_upper,
3538 0, FLUSH);
3539 return -EINVAL;
3540 }
3541 }
3542 }
3543
3544 switch (adapter->devid) {
3545 /* Oasis card */
3546 case SLIC_2GB_DEVICE_ID:
3547 /* extract EEPROM data and pointers to EEPROM data */
3548 pOeeprom = (struct oslic_eeprom *) peeprom;
3549 eecodesize = pOeeprom->EecodeSize;
3550 dramsize = pOeeprom->DramSize;
3551 pmac = pOeeprom->MacInfo;
3552 fruformat = pOeeprom->FruFormat;
3553 patkfru = &pOeeprom->AtkFru;
3554 oemfruformat = pOeeprom->OemFruFormat;
3555 poemfru = &pOeeprom->OemFru;
3556 macaddrs = 2;
3557 /* Minor kludge for Oasis card
3558 get 2 MAC addresses from the
3559 EEPROM to ensure that function 1
3560 gets the Port 1 MAC address */
3561 break;
3562 default:
3563 /* extract EEPROM data and pointers to EEPROM data */
3564 eecodesize = peeprom->EecodeSize;
3565 dramsize = peeprom->DramSize;
3566 pmac = peeprom->u2.mac.MacInfo;
3567 fruformat = peeprom->FruFormat;
3568 patkfru = &peeprom->AtkFru;
3569 oemfruformat = peeprom->OemFruFormat;
3570 poemfru = &peeprom->OemFru;
3571 break;
3572 }
3573
3574 card->config.EepromValid = false;
3575
3576 /* see if the EEPROM is valid by checking it's checksum */
3577 if ((eecodesize <= MAX_EECODE_SIZE) &&
3578 (eecodesize >= MIN_EECODE_SIZE)) {
3579
3580 ee_chksum =
3581 *(u16 *) ((char *) peeprom + (eecodesize - 2));
3582 /*
3583 calculate the EEPROM checksum
3584 */
3585 calc_chksum =
3586 ~slic_eeprom_cksum((char *) peeprom,
3587 (eecodesize - 2));
3588 /*
3589 if the ucdoe chksum flag bit worked,
3590 we wouldn't need this shit
3591 */
3592 if (ee_chksum == calc_chksum)
3593 card->config.EepromValid = true;
3594 }
3595 /* copy in the DRAM size */
3596 card->config.DramSize = dramsize;
3597
3598 /* copy in the MAC address(es) */
3599 for (i = 0; i < macaddrs; i++) {
3600 memcpy(&card->config.MacInfo[i],
3601 &pmac[i], sizeof(struct slic_config_mac));
3602 }
3603
3604 /* copy the Alacritech FRU information */
3605 card->config.FruFormat = fruformat;
3606 memcpy(&card->config.AtkFru, patkfru,
3607 sizeof(struct atk_fru));
3608
3609 pci_free_consistent(adapter->pcidev,
3610 sizeof(struct slic_eeprom),
3611 peeprom, phys_config);
3612
3613 if ((!card->config.EepromValid) &&
3614 (adapter->reg_params.fail_on_bad_eeprom)) {
3615 slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
3616 &slic_regs->slic_addr_upper,
3617 0, FLUSH);
3618 dev_err(&adapter->pcidev->dev,
3619 "unsupported CONFIGURATION EEPROM invalid\n");
3620 return -EINVAL;
3621 }
3622
3623 card->config_set = 1;
3624 }
3625
3626 if (slic_card_download_gbrcv(adapter)) {
3627 dev_err(&adapter->pcidev->dev,
3628 "unable to download GB receive microcode\n");
3629 return -EINVAL;
3630 }
3631
3632 if (slic_global.dynamic_intagg)
3633 slic_intagg_set(adapter, 0);
3634 else
3635 slic_intagg_set(adapter, intagg_delay);
3636
3637 /*
3638 * Initialize ping status to "ok"
3639 */
3640 card->pingstatus = ISR_PINGMASK;
3641
3642 /*
3643 * Lastly, mark our card state as up and return success
3644 */
3645 card->state = CARD_UP;
3646 card->reset_in_progress = 0;
3647
3648 return 0;
3649 }
3650
3651 static void slic_init_driver(void)
3652 {
3653 if (slic_first_init) {
3654 slic_first_init = 0;
3655 spin_lock_init(&slic_global.driver_lock.lock);
3656 slic_debug_init();
3657 }
3658 }
3659
3660 static void slic_init_adapter(struct net_device *netdev,
3661 struct pci_dev *pcidev,
3662 const struct pci_device_id *pci_tbl_entry,
3663 void __iomem *memaddr, int chip_idx)
3664 {
3665 ushort index;
3666 struct slic_handle *pslic_handle;
3667 struct adapter *adapter = netdev_priv(netdev);
3668
3669 /* adapter->pcidev = pcidev;*/
3670 adapter->vendid = pci_tbl_entry->vendor;
3671 adapter->devid = pci_tbl_entry->device;
3672 adapter->subsysid = pci_tbl_entry->subdevice;
3673 adapter->busnumber = pcidev->bus->number;
3674 adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
3675 adapter->functionnumber = (pcidev->devfn & 0x7);
3676 adapter->memorylength = pci_resource_len(pcidev, 0);
3677 adapter->slic_regs = (__iomem struct slic_regs *)memaddr;
3678 adapter->irq = pcidev->irq;
3679 /* adapter->netdev = netdev;*/
3680 adapter->next_netdevice = head_netdevice;
3681 head_netdevice = netdev;
3682 adapter->chipid = chip_idx;
3683 adapter->port = 0; /*adapter->functionnumber;*/
3684 adapter->cardindex = adapter->port;
3685 adapter->memorybase = memaddr;
3686 spin_lock_init(&adapter->upr_lock.lock);
3687 spin_lock_init(&adapter->bit64reglock.lock);
3688 spin_lock_init(&adapter->adapter_lock.lock);
3689 spin_lock_init(&adapter->reset_lock.lock);
3690 spin_lock_init(&adapter->handle_lock.lock);
3691
3692 adapter->card_size = 1;
3693 /*
3694 Initialize slic_handle array
3695 */
3696 ASSERT(SLIC_CMDQ_MAXCMDS <= 0xFFFF);
3697 /*
3698 Start with 1. 0 is an invalid host handle.
3699 */
3700 for (index = 1, pslic_handle = &adapter->slic_handles[1];
3701 index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
3702
3703 pslic_handle->token.handle_index = index;
3704 pslic_handle->type = SLIC_HANDLE_FREE;
3705 pslic_handle->next = adapter->pfree_slic_handles;
3706 adapter->pfree_slic_handles = pslic_handle;
3707 }
3708 adapter->pshmem = (struct slic_shmem *)
3709 pci_alloc_consistent(adapter->pcidev,
3710 sizeof(struct slic_shmem),
3711 &adapter->
3712 phys_shmem);
3713 ASSERT(adapter->pshmem);
3714
3715 memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
3716
3717 return;
3718 }
3719
3720 static const struct net_device_ops slic_netdev_ops = {
3721 .ndo_open = slic_entry_open,
3722 .ndo_stop = slic_entry_halt,
3723 .ndo_start_xmit = slic_xmit_start,
3724 .ndo_do_ioctl = slic_ioctl,
3725 .ndo_set_mac_address = slic_mac_set_address,
3726 .ndo_get_stats = slic_get_stats,
3727 .ndo_set_multicast_list = slic_mcast_set_list,
3728 .ndo_validate_addr = eth_validate_addr,
3729 .ndo_change_mtu = eth_change_mtu,
3730 };
3731
3732 static u32 slic_card_locate(struct adapter *adapter)
3733 {
3734 struct sliccard *card = slic_global.slic_card;
3735 struct physcard *physcard = slic_global.phys_card;
3736 ushort card_hostid;
3737 u16 __iomem *hostid_reg;
3738 uint i;
3739 uint rdhostid_offset = 0;
3740
3741 switch (adapter->devid) {
3742 case SLIC_2GB_DEVICE_ID:
3743 rdhostid_offset = SLIC_RDHOSTID_2GB;
3744 break;
3745 case SLIC_1GB_DEVICE_ID:
3746 rdhostid_offset = SLIC_RDHOSTID_1GB;
3747 break;
3748 default:
3749 ASSERT(0);
3750 break;
3751 }
3752
3753 hostid_reg =
3754 (u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
3755 rdhostid_offset);
3756
3757 /* read the 16 bit hostid from SRAM */
3758 card_hostid = (ushort) readw(hostid_reg);
3759
3760 /* Initialize a new card structure if need be */
3761 if (card_hostid == SLIC_HOSTID_DEFAULT) {
3762 card = kzalloc(sizeof(struct sliccard), GFP_KERNEL);
3763 if (card == NULL)
3764 return -ENOMEM;
3765
3766 card->next = slic_global.slic_card;
3767 slic_global.slic_card = card;
3768 card->busnumber = adapter->busnumber;
3769 card->slotnumber = adapter->slotnumber;
3770
3771 /* Find an available cardnum */
3772 for (i = 0; i < SLIC_MAX_CARDS; i++) {
3773 if (slic_global.cardnuminuse[i] == 0) {
3774 slic_global.cardnuminuse[i] = 1;
3775 card->cardnum = i;
3776 break;
3777 }
3778 }
3779 slic_global.num_slic_cards++;
3780
3781 slic_debug_card_create(card);
3782 } else {
3783 /* Card exists, find the card this adapter belongs to */
3784 while (card) {
3785 if (card->cardnum == card_hostid)
3786 break;
3787 card = card->next;
3788 }
3789 }
3790
3791 ASSERT(card);
3792 if (!card)
3793 return -ENXIO;
3794 /* Put the adapter in the card's adapter list */
3795 ASSERT(card->adapter[adapter->port] == NULL);
3796 if (!card->adapter[adapter->port]) {
3797 card->adapter[adapter->port] = adapter;
3798 adapter->card = card;
3799 }
3800
3801 card->card_size = 1; /* one port per *logical* card */
3802
3803 while (physcard) {
3804 for (i = 0; i < SLIC_MAX_PORTS; i++) {
3805 if (!physcard->adapter[i])
3806 continue;
3807 else
3808 break;
3809 }
3810 ASSERT(i != SLIC_MAX_PORTS);
3811 if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
3812 break;
3813 physcard = physcard->next;
3814 }
3815 if (!physcard) {
3816 /* no structure allocated for this physical card yet */
3817 physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
3818 ASSERT(physcard);
3819
3820 physcard->next = slic_global.phys_card;
3821 slic_global.phys_card = physcard;
3822 physcard->adapters_allocd = 1;
3823 } else {
3824 physcard->adapters_allocd++;
3825 }
3826 /* Note - this is ZERO relative */
3827 adapter->physport = physcard->adapters_allocd - 1;
3828
3829 ASSERT(physcard->adapter[adapter->physport] == NULL);
3830 physcard->adapter[adapter->physport] = adapter;
3831 adapter->physcard = physcard;
3832
3833 return 0;
3834 }
3835
3836 static int __devinit slic_entry_probe(struct pci_dev *pcidev,
3837 const struct pci_device_id *pci_tbl_entry)
3838 {
3839 static int cards_found;
3840 static int did_version;
3841 int err = -ENODEV;
3842 struct net_device *netdev;
3843 struct adapter *adapter;
3844 void __iomem *memmapped_ioaddr = NULL;
3845 u32 status = 0;
3846 ulong mmio_start = 0;
3847 ulong mmio_len = 0;
3848 struct sliccard *card = NULL;
3849 int pci_using_dac = 0;
3850
3851 slic_global.dynamic_intagg = dynamic_intagg;
3852
3853 err = pci_enable_device(pcidev);
3854
3855 if (err)
3856 return err;
3857
3858 if (slic_debug > 0 && did_version++ == 0) {
3859 printk(KERN_DEBUG "%s\n", slic_banner);
3860 printk(KERN_DEBUG "%s\n", slic_proc_version);
3861 }
3862
3863 if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
3864 pci_using_dac = 1;
3865 if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
3866 dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for "
3867 "consistent allocations\n");
3868 goto err_out_disable_pci;
3869 }
3870 } else if (pci_set_dma_mask(pcidev, DMA_BIT_MASK(32))) {
3871 pci_using_dac = 0;
3872 pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
3873 } else {
3874 dev_err(&pcidev->dev, "no usable DMA configuration\n");
3875 goto err_out_disable_pci;
3876 }
3877
3878 err = pci_request_regions(pcidev, DRV_NAME);
3879 if (err) {
3880 dev_err(&pcidev->dev, "can't obtain PCI resources\n");
3881 goto err_out_disable_pci;
3882 }
3883
3884 pci_set_master(pcidev);
3885
3886 netdev = alloc_etherdev(sizeof(struct adapter));
3887 if (!netdev) {
3888 err = -ENOMEM;
3889 goto err_out_exit_slic_probe;
3890 }
3891
3892 SET_NETDEV_DEV(netdev, &pcidev->dev);
3893
3894 pci_set_drvdata(pcidev, netdev);
3895 adapter = netdev_priv(netdev);
3896 adapter->netdev = netdev;
3897 adapter->pcidev = pcidev;
3898 if (pci_using_dac)
3899 netdev->features |= NETIF_F_HIGHDMA;
3900
3901 mmio_start = pci_resource_start(pcidev, 0);
3902 mmio_len = pci_resource_len(pcidev, 0);
3903
3904
3905 /* memmapped_ioaddr = (u32)ioremap_nocache(mmio_start, mmio_len);*/
3906 memmapped_ioaddr = ioremap(mmio_start, mmio_len);
3907 if (!memmapped_ioaddr) {
3908 dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
3909 mmio_len, mmio_start);
3910 goto err_out_free_netdev;
3911 }
3912
3913 slic_config_pci(pcidev);
3914
3915 slic_init_driver();
3916
3917 slic_init_adapter(netdev,
3918 pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
3919
3920 status = slic_card_locate(adapter);
3921 if (status) {
3922 dev_err(&pcidev->dev, "cannot locate card\n");
3923 goto err_out_free_mmio_region;
3924 }
3925
3926 card = adapter->card;
3927
3928 if (!adapter->allocated) {
3929 card->adapters_allocated++;
3930 adapter->allocated = 1;
3931 }
3932
3933 status = slic_card_init(card, adapter);
3934
3935 if (status != 0) {
3936 card->state = CARD_FAIL;
3937 adapter->state = ADAPT_FAIL;
3938 adapter->linkstate = LINK_DOWN;
3939 dev_err(&pcidev->dev, "FAILED status[%x]\n", status);
3940 } else {
3941 slic_adapter_set_hwaddr(adapter);
3942 }
3943
3944 netdev->base_addr = (unsigned long)adapter->memorybase;
3945 netdev->irq = adapter->irq;
3946 netdev->netdev_ops = &slic_netdev_ops;
3947
3948 slic_debug_adapter_create(adapter);
3949
3950 strcpy(netdev->name, "eth%d");
3951 err = register_netdev(netdev);
3952 if (err) {
3953 dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
3954 goto err_out_unmap;
3955 }
3956
3957 cards_found++;
3958
3959 return status;
3960
3961 err_out_unmap:
3962 iounmap(memmapped_ioaddr);
3963 err_out_free_mmio_region:
3964 release_mem_region(mmio_start, mmio_len);
3965 err_out_free_netdev:
3966 free_netdev(netdev);
3967 err_out_exit_slic_probe:
3968 pci_release_regions(pcidev);
3969 err_out_disable_pci:
3970 pci_disable_device(pcidev);
3971 return err;
3972 }
3973
3974 static struct pci_driver slic_driver = {
3975 .name = DRV_NAME,
3976 .id_table = slic_pci_tbl,
3977 .probe = slic_entry_probe,
3978 .remove = __devexit_p(slic_entry_remove),
3979 };
3980
3981 static int __init slic_module_init(void)
3982 {
3983 slic_init_driver();
3984
3985 if (debug >= 0 && slic_debug != debug)
3986 printk(KERN_DEBUG KBUILD_MODNAME ": debug level is %d.\n",
3987 debug);
3988 if (debug >= 0)
3989 slic_debug = debug;
3990
3991 return pci_register_driver(&slic_driver);
3992 }
3993
3994 static void __exit slic_module_cleanup(void)
3995 {
3996 pci_unregister_driver(&slic_driver);
3997 slic_debug_cleanup();
3998 }
3999
4000 module_init(slic_module_init);
4001 module_exit(slic_module_cleanup);
linux-next