| blob | f96933f48a7fd933c9fce9df72ef182cf66c5cce |
1 /*
2 * Contains the system-call and fault low-level handling routines.
3 * This also contains the timer-interrupt handler, as well as all
4 * interrupts and faults that can result in a task-switch.
5 *
6 * Copyright 2005-2009 Analog Devices Inc.
7 *
8 * Licensed under the GPL-2 or later.
9 */
11 /* NOTE: This code handles signal-recognition, which happens every time
12 * after a timer-interrupt and after each system call.
13 */
15 #include <linux/init.h>
16 #include <linux/linkage.h>
17 #include <linux/unistd.h>
18 #include <asm/blackfin.h>
19 #include <asm/errno.h>
20 #include <asm/fixed_code.h>
21 #include <asm/thread_info.h> /* TIF_NEED_RESCHED */
22 #include <asm/asm-offsets.h>
23 #include <asm/trace.h>
24 #include <asm/traps.h>
26 #include <asm/context.S>
28 #if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
29 # define EX_SCRATCH_REG RETN
30 #elif defined(CONFIG_BFIN_SCRATCH_REG_RETE)
31 # define EX_SCRATCH_REG RETE
32 #else
33 # define EX_SCRATCH_REG CYCLES
34 #endif
36 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
37 .section .l1.text
38 #else
39 .text
40 #endif
42 /* Slightly simplified and streamlined entry point for CPLB misses.
43 * This one does not lower the level to IRQ5, and thus can be used to
44 * patch up CPLB misses on the kernel stack.
45 */
46 #if ANOMALY_05000261
47 #define _ex_dviol _ex_workaround_261
48 #define _ex_dmiss _ex_workaround_261
49 #define _ex_dmult _ex_workaround_261
51 ENTRY(_ex_workaround_261)
52 /*
53 * Work around an anomaly: if we see a new DCPLB fault, return
54 * without doing anything. Then, if we get the same fault again,
55 * handle it.
56 */
57 P4 = R7; /* Store EXCAUSE */
59 GET_PDA(p5, r7);
60 r7 = [p5 + PDA_LFRETX];
61 r6 = retx;
62 [p5 + PDA_LFRETX] = r6;
63 cc = r6 == r7;
64 if !cc jump _bfin_return_from_exception;
65 /* fall through */
66 R7 = P4;
67 R6 = VEC_CPLB_M; /* Data CPLB Miss */
68 cc = R6 == R7;
69 if cc jump _ex_dcplb_miss (BP);
70 #ifdef CONFIG_MPU
71 R6 = VEC_CPLB_VL; /* Data CPLB Violation */
72 cc = R6 == R7;
73 if cc jump _ex_dcplb_viol (BP);
74 #endif
75 /* Handle Data CPLB Protection Violation
76 * and Data CPLB Multiple Hits - Linux Trap Zero
77 */
78 jump _ex_trap_c;
79 ENDPROC(_ex_workaround_261)
81 #else
82 #ifdef CONFIG_MPU
83 #define _ex_dviol _ex_dcplb_viol
84 #else
85 #define _ex_dviol _ex_trap_c
86 #endif
87 #define _ex_dmiss _ex_dcplb_miss
88 #define _ex_dmult _ex_trap_c
89 #endif
92 ENTRY(_ex_dcplb_viol)
93 ENTRY(_ex_dcplb_miss)
94 ENTRY(_ex_icplb_miss)
95 (R7:6,P5:4) = [sp++];
96 /* We leave the previously pushed ASTAT on the stack. */
97 SAVE_CONTEXT_CPLB
99 /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that
100 * will change the stack pointer. */
101 R0 = SEQSTAT;
102 R1 = SP;
104 DEBUG_HWTRACE_SAVE(p5, r7)
106 sp += -12;
107 call _cplb_hdr;
108 sp += 12;
109 CC = R0 == 0;
110 IF !CC JUMP _handle_bad_cplb;
112 #ifdef CONFIG_DEBUG_DOUBLEFAULT
113 /* While we were processing this, did we double fault? */
114 r7 = SEQSTAT; /* reason code is in bit 5:0 */
115 r6.l = lo(SEQSTAT_EXCAUSE);
116 r6.h = hi(SEQSTAT_EXCAUSE);
117 r7 = r7 & r6;
118 r6 = 0x25;
119 CC = R7 == R6;
120 if CC JUMP _double_fault;
121 #endif
123 DEBUG_HWTRACE_RESTORE(p5, r7)
124 RESTORE_CONTEXT_CPLB
125 ASTAT = [SP++];
126 SP = EX_SCRATCH_REG;
127 rtx;
128 ENDPROC(_ex_icplb_miss)
130 ENTRY(_ex_syscall)
131 raise 15; /* invoked by TRAP #0, for sys call */
132 jump.s _bfin_return_from_exception;
133 ENDPROC(_ex_syscall)
135 ENTRY(_ex_single_step)
136 /* If we just returned from an interrupt, the single step event is
137 for the RTI instruction. */
138 r7 = retx;
139 r6 = reti;
140 cc = r7 == r6;
141 if cc jump _bfin_return_from_exception;
143 #ifdef CONFIG_KGDB
144 /* Don't do single step in hardware exception handler */
145 p5.l = lo(IPEND);
146 p5.h = hi(IPEND);
147 r6 = [p5];
148 cc = bittst(r6, 4);
149 if cc jump _bfin_return_from_exception;
150 cc = bittst(r6, 5);
151 if cc jump _bfin_return_from_exception;
153 /* skip single step if current interrupt priority is higher than
154 * that of the first instruction, from which gdb starts single step */
155 r6 >>= 6;
156 r7 = 10;
157 .Lfind_priority_start:
158 cc = bittst(r6, 0);
159 if cc jump .Lfind_priority_done;
160 r6 >>= 1;
161 r7 += -1;
162 cc = r7 == 0;
163 if cc jump .Lfind_priority_done;
164 jump.s .Lfind_priority_start;
165 .Lfind_priority_done:
166 p4.l = _kgdb_single_step;
167 p4.h = _kgdb_single_step;
168 r6 = [p4];
169 cc = r6 == 0;
170 if cc jump .Ldo_single_step;
171 r6 += -1;
172 cc = r6 < r7;
173 if cc jump 1f;
174 .Ldo_single_step:
175 #else
176 /* If we were in user mode, do the single step normally. */
177 p5.l = lo(IPEND);
178 p5.h = hi(IPEND);
179 r6 = [p5];
180 r7 = 0xffe0 (z);
181 r7 = r7 & r6;
182 cc = r7 == 0;
183 if !cc jump 1f;
184 #endif
185 #ifdef CONFIG_EXACT_HWERR
186 /* Read the ILAT, and to check to see if the process we are
187 * single stepping caused a previous hardware error
188 * If so, do not single step, (which lowers to IRQ5, and makes
189 * us miss the error).
190 */
191 p5.l = lo(ILAT);
192 p5.h = hi(ILAT);
193 r7 = [p5];
194 cc = bittst(r7, EVT_IVHW_P);
195 if cc jump 1f;
196 #endif
197 /* Single stepping only a single instruction, so clear the trace
198 * bit here. */
199 r7 = syscfg;
200 bitclr (r7, SYSCFG_SSSTEP_P);
201 syscfg = R7;
202 jump _ex_trap_c;
204 1:
205 /*
206 * We were in an interrupt handler. By convention, all of them save
207 * SYSCFG with their first instruction, so by checking whether our
208 * RETX points at the entry point, we can determine whether to allow
209 * a single step, or whether to clear SYSCFG.
210 *
211 * First, find out the interrupt level and the event vector for it.
212 */
213 p5.l = lo(EVT0);
214 p5.h = hi(EVT0);
215 p5 += -4;
216 2:
217 r7 = rot r7 by -1;
218 p5 += 4;
219 if !cc jump 2b;
221 /* What we actually do is test for the _second_ instruction in the
222 * IRQ handler. That way, if there are insns following the restore
223 * of SYSCFG after leaving the handler, we will not turn off SYSCFG
224 * for them. */
226 r7 = [p5];
227 r7 += 2;
228 r6 = RETX;
229 cc = R7 == R6;
230 if !cc jump _bfin_return_from_exception;
232 r7 = syscfg;
233 bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */
234 syscfg = R7;
236 /* Fall through to _bfin_return_from_exception. */
237 ENDPROC(_ex_single_step)
239 ENTRY(_bfin_return_from_exception)
240 #if ANOMALY_05000257
241 R7=LC0;
242 LC0=R7;
243 R7=LC1;
244 LC1=R7;
245 #endif
247 #ifdef CONFIG_DEBUG_DOUBLEFAULT
248 /* While we were processing the current exception,
249 * did we cause another, and double fault?
250 */
251 r7 = SEQSTAT; /* reason code is in bit 5:0 */
252 r6.l = lo(SEQSTAT_EXCAUSE);
253 r6.h = hi(SEQSTAT_EXCAUSE);
254 r7 = r7 & r6;
255 r6 = VEC_UNCOV;
256 CC = R7 == R6;
257 if CC JUMP _double_fault;
258 #endif
260 (R7:6,P5:4) = [sp++];
261 ASTAT = [sp++];
262 sp = EX_SCRATCH_REG;
263 rtx;
264 ENDPROC(_bfin_return_from_exception)
266 ENTRY(_handle_bad_cplb)
267 DEBUG_HWTRACE_RESTORE(p5, r7)
268 /* To get here, we just tried and failed to change a CPLB
269 * so, handle things in trap_c (C code), by lowering to
270 * IRQ5, just like we normally do. Since this is not a
271 * "normal" return path, we have a do a lot of stuff to
272 * the stack to get ready so, we can fall through - we
273 * need to make a CPLB exception look like a normal exception
274 */
275 RESTORE_CONTEXT_CPLB
276 /* ASTAT is still on the stack, where it is needed. */
277 [--sp] = (R7:6,P5:4);
279 ENTRY(_ex_replaceable)
280 nop;
282 ENTRY(_ex_trap_c)
283 /* The only thing that has been saved in this context is
284 * (R7:6,P5:4), ASTAT & SP - don't use anything else
285 */
287 GET_PDA(p5, r6);
289 /* Make sure we are not in a double fault */
290 p4.l = lo(IPEND);
291 p4.h = hi(IPEND);
292 r7 = [p4];
293 CC = BITTST (r7, 5);
294 if CC jump _double_fault;
295 [p5 + PDA_EXIPEND] = r7;
297 /* Call C code (trap_c) to handle the exception, which most
298 * likely involves sending a signal to the current process.
299 * To avoid double faults, lower our priority to IRQ5 first.
300 */
301 r7.h = _exception_to_level5;
302 r7.l = _exception_to_level5;
303 p4.l = lo(EVT5);
304 p4.h = hi(EVT5);
305 [p4] = r7;
306 csync;
308 /*
309 * Save these registers, as they are only valid in exception context
310 * (where we are now - as soon as we defer to IRQ5, they can change)
311 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
312 * but they are not very interesting, so don't save them
313 */
315 p4.l = lo(DCPLB_FAULT_ADDR);
316 p4.h = hi(DCPLB_FAULT_ADDR);
317 r7 = [p4];
318 [p5 + PDA_DCPLB] = r7;
320 p4.l = lo(ICPLB_FAULT_ADDR);
321 p4.h = hi(ICPLB_FAULT_ADDR);
322 r6 = [p4];
323 [p5 + PDA_ICPLB] = r6;
325 r6 = retx;
326 [p5 + PDA_RETX] = r6;
328 r6 = SEQSTAT;
329 [p5 + PDA_SEQSTAT] = r6;
331 /* Save the state of single stepping */
332 r6 = SYSCFG;
333 [p5 + PDA_SYSCFG] = r6;
334 /* Clear it while we handle the exception in IRQ5 mode */
335 BITCLR(r6, SYSCFG_SSSTEP_P);
336 SYSCFG = r6;
338 /* Save the current IMASK, since we change in order to jump to level 5 */
339 cli r6;
340 [p5 + PDA_EXIMASK] = r6;
342 p4.l = lo(SAFE_USER_INSTRUCTION);
343 p4.h = hi(SAFE_USER_INSTRUCTION);
344 retx = p4;
346 /* Disable all interrupts, but make sure level 5 is enabled so
347 * we can switch to that level.
348 */
349 r6 = 0x3f;
350 sti r6;
352 /* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
353 * clear it (re-enabling interrupts again) by the special sequence of pushing
354 * RETI onto the stack. This way we can lower ourselves to IVG5 even if the
355 * exception was taken after the interrupt handler was called but before it
356 * got a chance to enable global interrupts itself.
357 */
358 [--sp] = reti;
359 sp += 4;
361 raise 5;
362 jump.s _bfin_return_from_exception;
363 ENDPROC(_ex_trap_c)
365 /* We just realized we got an exception, while we were processing a different
366 * exception. This is a unrecoverable event, so crash.
367 * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
368 */
369 ENTRY(_double_fault)
370 /* Turn caches & protection off, to ensure we don't get any more
371 * double exceptions
372 */
374 P4.L = LO(IMEM_CONTROL);
375 P4.H = HI(IMEM_CONTROL);
377 R5 = [P4]; /* Control Register*/
378 BITCLR(R5,ENICPLB_P);
379 CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
380 [P4] = R5;
381 SSYNC;
383 P4.L = LO(DMEM_CONTROL);
384 P4.H = HI(DMEM_CONTROL);
385 R5 = [P4];
386 BITCLR(R5,ENDCPLB_P);
387 CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
388 [P4] = R5;
389 SSYNC;
391 /* Fix up the stack */
392 (R7:6,P5:4) = [sp++];
393 ASTAT = [sp++];
394 SP = EX_SCRATCH_REG;
396 /* We should be out of the exception stack, and back down into
397 * kernel or user space stack
398 */
399 SAVE_ALL_SYS
401 /* The dumping functions expect the return address in the RETI
402 * slot. */
403 r6 = retx;
404 [sp + PT_PC] = r6;
406 r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
407 SP += -12;
408 pseudo_long_call _double_fault_c, p5;
409 SP += 12;
410 .L_double_fault_panic:
411 JUMP .L_double_fault_panic
413 ENDPROC(_double_fault)
415 ENTRY(_exception_to_level5)
416 SAVE_ALL_SYS
418 GET_PDA(p5, r7); /* Fetch current PDA */
419 r6 = [p5 + PDA_RETX];
420 [sp + PT_PC] = r6;
422 r6 = [p5 + PDA_SYSCFG];
423 [sp + PT_SYSCFG] = r6;
425 r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
426 [sp + PT_SEQSTAT] = r6;
428 /* Restore the hardware error vector. */
429 r7.h = _evt_ivhw;
430 r7.l = _evt_ivhw;
431 p4.l = lo(EVT5);
432 p4.h = hi(EVT5);
433 [p4] = r7;
434 csync;
436 #ifdef CONFIG_DEBUG_DOUBLEFAULT
437 /* Now that we have the hardware error vector programmed properly
438 * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
439 * another hardware error, we can catch it (self-nesting).
440 */
441 [--sp] = reti;
442 sp += 4;
443 #endif
445 r7 = [p5 + PDA_EXIPEND] /* Read the IPEND from the Exception state */
446 [sp + PT_IPEND] = r7; /* Store IPEND onto the stack */
448 r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
449 SP += -12;
450 pseudo_long_call _trap_c, p4;
451 SP += 12;
453 /* If interrupts were off during the exception (IPEND[4] = 1), turn them off
454 * before we return.
455 */
456 CC = BITTST(r7, EVT_IRPTEN_P)
457 if !CC jump 1f;
458 /* this will load a random value into the reti register - but that is OK,
459 * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
460 */
461 sp += -4;
462 reti = [sp++];
463 1:
464 /* restore the interrupt mask (IMASK) */
465 r6 = [p5 + PDA_EXIMASK];
466 sti r6;
468 call _ret_from_exception;
469 RESTORE_ALL_SYS
470 rti;
471 ENDPROC(_exception_to_level5)
473 ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
474 /* Since the kernel stack can be anywhere, it's not guaranteed to be
475 * covered by a CPLB. Switch to an exception stack; use RETN as a
476 * scratch register (for want of a better option).
477 */
478 EX_SCRATCH_REG = sp;
479 GET_PDA_SAFE(sp);
480 sp = [sp + PDA_EXSTACK];
481 /* Try to deal with syscalls quickly. */
482 [--sp] = ASTAT;
483 [--sp] = (R7:6,P5:4);
485 ANOMALY_283_315_WORKAROUND(p5, r7)
487 #ifdef CONFIG_EXACT_HWERR
488 /* Make sure all pending read/writes complete. This will ensure any
489 * accesses which could cause hardware errors completes, and signal
490 * the the hardware before we do something silly, like crash the
491 * kernel. We don't need to work around anomaly 05000312, since
492 * we are already atomic
493 */
494 ssync;
495 #endif
497 #ifdef CONFIG_DEBUG_DOUBLEFAULT
498 /*
499 * Save these registers, as they are only valid in exception context
500 * (where we are now - as soon as we defer to IRQ5, they can change)
501 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
502 * but they are not very interesting, so don't save them
503 */
505 GET_PDA(p5, r7);
506 p4.l = lo(DCPLB_FAULT_ADDR);
507 p4.h = hi(DCPLB_FAULT_ADDR);
508 r7 = [p4];
509 [p5 + PDA_DF_DCPLB] = r7;
511 p4.l = lo(ICPLB_FAULT_ADDR);
512 p4.h = hi(ICPLB_FAULT_ADDR);
513 r7 = [p4];
514 [p5 + PDA_DF_ICPLB] = r7;
516 r7 = retx;
517 [p5 + PDA_DF_RETX] = r7;
519 r7 = SEQSTAT; /* reason code is in bit 5:0 */
520 [p5 + PDA_DF_SEQSTAT] = r7;
521 #else
522 r7 = SEQSTAT; /* reason code is in bit 5:0 */
523 #endif
524 r6.l = lo(SEQSTAT_EXCAUSE);
525 r6.h = hi(SEQSTAT_EXCAUSE);
526 r7 = r7 & r6;
527 p5.h = _ex_table;
528 p5.l = _ex_table;
529 p4 = r7;
530 p5 = p5 + (p4 << 2);
531 p4 = [p5];
532 jump (p4);
534 .Lbadsys:
535 r7 = -ENOSYS; /* signextending enough */
536 [sp + PT_R0] = r7; /* return value from system call */
537 jump .Lsyscall_really_exit;
538 ENDPROC(_trap)
540 ENTRY(_kernel_execve)
541 link SIZEOF_PTREGS;
542 p0 = sp;
543 r3 = SIZEOF_PTREGS / 4;
544 r4 = 0(x);
545 .Lclear_regs:
546 [p0++] = r4;
547 r3 += -1;
548 cc = r3 == 0;
549 if !cc jump .Lclear_regs (bp);
551 p0 = sp;
552 sp += -16;
553 [sp + 12] = p0;
554 pseudo_long_call _do_execve, p5;
555 SP += 16;
556 cc = r0 == 0;
557 if ! cc jump .Lexecve_failed;
558 /* Success. Copy our temporary pt_regs to the top of the kernel
559 * stack and do a normal exception return.
560 */
561 r1 = sp;
562 r0 = (-KERNEL_STACK_SIZE) (x);
563 r1 = r1 & r0;
564 p2 = r1;
565 p3 = [p2];
566 r0 = KERNEL_STACK_SIZE - 4 (z);
567 p1 = r0;
568 p1 = p1 + p2;
570 p0 = fp;
571 r4 = [p0--];
572 r3 = SIZEOF_PTREGS / 4;
573 .Lcopy_regs:
574 r4 = [p0--];
575 [p1--] = r4;
576 r3 += -1;
577 cc = r3 == 0;
578 if ! cc jump .Lcopy_regs (bp);
580 r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z);
581 p1 = r0;
582 p1 = p1 + p2;
583 sp = p1;
584 r0 = syscfg;
585 [SP + PT_SYSCFG] = r0;
586 [p3 + (TASK_THREAD + THREAD_KSP)] = sp;
588 RESTORE_CONTEXT;
589 rti;
590 .Lexecve_failed:
591 unlink;
592 rts;
593 ENDPROC(_kernel_execve)
595 ENTRY(_system_call)
596 /* Store IPEND */
597 p2.l = lo(IPEND);
598 p2.h = hi(IPEND);
599 csync;
600 r0 = [p2];
601 [sp + PT_IPEND] = r0;
603 /* Store RETS for now */
604 r0 = rets;
605 [sp + PT_RESERVED] = r0;
606 /* Set the stack for the current process */
607 r7 = sp;
608 r6.l = lo(ALIGN_PAGE_MASK);
609 r6.h = hi(ALIGN_PAGE_MASK);
610 r7 = r7 & r6; /* thread_info */
611 p2 = r7;
612 p2 = [p2];
614 [p2+(TASK_THREAD+THREAD_KSP)] = sp;
615 #ifdef CONFIG_IPIPE
616 r0 = sp;
617 SP += -12;
618 pseudo_long_call ___ipipe_syscall_root, p0;
619 SP += 12;
620 cc = r0 == 1;
621 if cc jump .Lsyscall_really_exit;
622 cc = r0 == -1;
623 if cc jump .Lresume_userspace;
624 r3 = [sp + PT_R3];
625 r4 = [sp + PT_R4];
626 p0 = [sp + PT_ORIG_P0];
627 #endif /* CONFIG_IPIPE */
629 /* are we tracing syscalls?*/
630 r7 = sp;
631 r6.l = lo(ALIGN_PAGE_MASK);
632 r6.h = hi(ALIGN_PAGE_MASK);
633 r7 = r7 & r6;
634 p2 = r7;
635 r7 = [p2+TI_FLAGS];
636 CC = BITTST(r7,TIF_SYSCALL_TRACE);
637 if CC JUMP _sys_trace;
638 CC = BITTST(r7,TIF_SINGLESTEP);
639 if CC JUMP _sys_trace;
641 /* Make sure the system call # is valid */
642 p4 = __NR_syscall;
643 /* System call number is passed in P0 */
644 cc = p4 <= p0;
645 if cc jump .Lbadsys;
647 /* Execute the appropriate system call */
649 p4 = p0;
650 p5.l = _sys_call_table;
651 p5.h = _sys_call_table;
652 p5 = p5 + (p4 << 2);
653 r0 = [sp + PT_R0];
654 r1 = [sp + PT_R1];
655 r2 = [sp + PT_R2];
656 p5 = [p5];
658 [--sp] = r5;
659 [--sp] = r4;
660 [--sp] = r3;
661 SP += -12;
662 call (p5);
663 SP += 24;
664 [sp + PT_R0] = r0;
666 .Lresume_userspace:
667 r7 = sp;
668 r4.l = lo(ALIGN_PAGE_MASK);
669 r4.h = hi(ALIGN_PAGE_MASK);
670 r7 = r7 & r4; /* thread_info->flags */
671 p5 = r7;
672 .Lresume_userspace_1:
673 /* Disable interrupts. */
674 [--sp] = reti;
675 reti = [sp++];
677 r7 = [p5 + TI_FLAGS];
678 r4.l = lo(_TIF_WORK_MASK);
679 r4.h = hi(_TIF_WORK_MASK);
680 r7 = r7 & r4;
682 .Lsyscall_resched:
683 #ifdef CONFIG_IPIPE
684 cc = BITTST(r7, TIF_IRQ_SYNC);
685 if !cc jump .Lsyscall_no_irqsync;
686 /*
687 * Clear IPEND[4] manually to undo what resume_userspace_1 just did;
688 * we need this so that high priority domain interrupts may still
689 * preempt the current domain while the pipeline log is being played
690 * back.
691 */
692 [--sp] = reti;
693 SP += 4; /* don't merge with next insn to keep the pattern obvious */
694 SP += -12;
695 pseudo_long_call ___ipipe_sync_root, p4;
696 SP += 12;
697 jump .Lresume_userspace_1;
698 .Lsyscall_no_irqsync:
699 #endif
700 cc = BITTST(r7, TIF_NEED_RESCHED);
701 if !cc jump .Lsyscall_sigpending;
703 /* Reenable interrupts. */
704 [--sp] = reti;
705 sp += 4;
707 SP += -12;
708 pseudo_long_call _schedule, p4;
709 SP += 12;
711 jump .Lresume_userspace_1;
713 .Lsyscall_sigpending:
714 cc = BITTST(r7, TIF_RESTORE_SIGMASK);
715 if cc jump .Lsyscall_do_signals;
716 cc = BITTST(r7, TIF_SIGPENDING);
717 if cc jump .Lsyscall_do_signals;
718 cc = BITTST(r7, TIF_NOTIFY_RESUME);
719 if !cc jump .Lsyscall_really_exit;
720 .Lsyscall_do_signals:
721 /* Reenable interrupts. */
722 [--sp] = reti;
723 sp += 4;
725 r0 = sp;
726 SP += -12;
727 pseudo_long_call _do_notify_resume, p5;
728 SP += 12;
730 .Lsyscall_really_exit:
731 r5 = [sp + PT_RESERVED];
732 rets = r5;
733 rts;
734 ENDPROC(_system_call)
736 /* Do not mark as ENTRY() to avoid error in assembler ...
737 * this symbol need not be global anyways, so ...
738 */
739 _sys_trace:
740 r0 = sp;
741 pseudo_long_call _syscall_trace_enter, p5;
743 /* Make sure the system call # is valid */
744 p4 = [SP + PT_P0];
745 p3 = __NR_syscall;
746 cc = p3 <= p4;
747 r0 = -ENOSYS;
748 if cc jump .Lsys_trace_badsys;
750 /* Execute the appropriate system call */
751 p5.l = _sys_call_table;
752 p5.h = _sys_call_table;
753 p5 = p5 + (p4 << 2);
754 r0 = [sp + PT_R0];
755 r1 = [sp + PT_R1];
756 r2 = [sp + PT_R2];
757 r3 = [sp + PT_R3];
758 r4 = [sp + PT_R4];
759 r5 = [sp + PT_R5];
760 p5 = [p5];
762 [--sp] = r5;
763 [--sp] = r4;
764 [--sp] = r3;
765 SP += -12;
766 call (p5);
767 SP += 24;
768 .Lsys_trace_badsys:
769 [sp + PT_R0] = r0;
771 r0 = sp;
772 pseudo_long_call _syscall_trace_leave, p5;
773 jump .Lresume_userspace;
774 ENDPROC(_sys_trace)
776 ENTRY(_resume)
777 /*
778 * Beware - when entering resume, prev (the current task) is
779 * in r0, next (the new task) is in r1.
780 */
781 p0 = r0;
782 p1 = r1;
783 [--sp] = rets;
784 [--sp] = fp;
785 [--sp] = (r7:4, p5:3);
787 /* save usp */
788 p2 = usp;
789 [p0+(TASK_THREAD+THREAD_USP)] = p2;
791 /* save current kernel stack pointer */
792 [p0+(TASK_THREAD+THREAD_KSP)] = sp;
794 /* save program counter */
795 r1.l = _new_old_task;
796 r1.h = _new_old_task;
797 [p0+(TASK_THREAD+THREAD_PC)] = r1;
799 /* restore the kernel stack pointer */
800 sp = [p1+(TASK_THREAD+THREAD_KSP)];
802 /* restore user stack pointer */
803 p0 = [p1+(TASK_THREAD+THREAD_USP)];
804 usp = p0;
806 /* restore pc */
807 p0 = [p1+(TASK_THREAD+THREAD_PC)];
808 jump (p0);
810 /*
811 * Following code actually lands up in a new (old) task.
812 */
814 _new_old_task:
815 (r7:4, p5:3) = [sp++];
816 fp = [sp++];
817 rets = [sp++];
819 /*
820 * When we come out of resume, r0 carries "old" task, because we are
821 * in "new" task.
822 */
823 rts;
824 ENDPROC(_resume)
826 ENTRY(_ret_from_exception)
827 #ifdef CONFIG_IPIPE
828 p2.l = _ipipe_percpu_domain;
829 p2.h = _ipipe_percpu_domain;
830 r0.l = _ipipe_root;
831 r0.h = _ipipe_root;
832 r2 = [p2];
833 cc = r0 == r2;
834 if !cc jump 4f; /* not on behalf of the root domain, get out */
835 #endif /* CONFIG_IPIPE */
836 p2.l = lo(IPEND);
837 p2.h = hi(IPEND);
839 csync;
840 r0 = [p2];
841 [sp + PT_IPEND] = r0;
843 1:
844 r2 = LO(~0x37) (Z);
845 r0 = r2 & r0;
846 cc = r0 == 0;
847 if !cc jump 4f; /* if not return to user mode, get out */
849 /* Make sure any pending system call or deferred exception
850 * return in ILAT for this process to get executed, otherwise
851 * in case context switch happens, system call of
852 * first process (i.e in ILAT) will be carried
853 * forward to the switched process
854 */
856 p2.l = lo(ILAT);
857 p2.h = hi(ILAT);
858 r0 = [p2];
859 r1 = (EVT_IVG14 | EVT_IVG15) (z);
860 r0 = r0 & r1;
861 cc = r0 == 0;
862 if !cc jump 5f;
864 /* Set the stack for the current process */
865 r7 = sp;
866 r4.l = lo(ALIGN_PAGE_MASK);
867 r4.h = hi(ALIGN_PAGE_MASK);
868 r7 = r7 & r4; /* thread_info->flags */
869 p5 = r7;
870 r7 = [p5 + TI_FLAGS];
871 r4.l = lo(_TIF_WORK_MASK);
872 r4.h = hi(_TIF_WORK_MASK);
873 r7 = r7 & r4;
874 cc = r7 == 0;
875 if cc jump 4f;
877 p0.l = lo(EVT15);
878 p0.h = hi(EVT15);
879 p1.l = _schedule_and_signal;
880 p1.h = _schedule_and_signal;
881 [p0] = p1;
882 csync;
883 raise 15; /* raise evt15 to do signal or reschedule */
884 4:
885 r0 = syscfg;
886 bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */
887 syscfg = r0;
888 5:
889 rts;
890 ENDPROC(_ret_from_exception)
892 #if defined(CONFIG_PREEMPT)
894 ENTRY(_up_to_irq14)
895 #if ANOMALY_05000281 || ANOMALY_05000461
896 r0.l = lo(SAFE_USER_INSTRUCTION);
897 r0.h = hi(SAFE_USER_INSTRUCTION);
898 reti = r0;
899 #endif
901 #ifdef CONFIG_DEBUG_HWERR
902 /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
903 r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
904 #else
905 /* Only enable irq14 interrupt, until we transition to _evt_evt14 */
906 r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
907 #endif
908 sti r0;
910 p0.l = lo(EVT14);
911 p0.h = hi(EVT14);
912 p1.l = _evt_up_evt14;
913 p1.h = _evt_up_evt14;
914 [p0] = p1;
915 csync;
917 raise 14;
918 1:
919 jump 1b;
920 ENDPROC(_up_to_irq14)
922 ENTRY(_evt_up_evt14)
923 #ifdef CONFIG_DEBUG_HWERR
924 r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
925 sti r0;
926 #else
927 cli r0;
928 #endif
929 #ifdef CONFIG_TRACE_IRQFLAGS
930 [--sp] = rets;
931 sp += -12;
932 call _trace_hardirqs_off;
933 sp += 12;
934 rets = [sp++];
935 #endif
936 [--sp] = RETI;
937 SP += 4;
939 /* restore normal evt14 */
940 p0.l = lo(EVT14);
941 p0.h = hi(EVT14);
942 p1.l = _evt_evt14;
943 p1.h = _evt_evt14;
944 [p0] = p1;
945 csync;
947 rts;
948 ENDPROC(_evt_up_evt14)
950 #endif
952 #ifdef CONFIG_IPIPE
954 _resume_kernel_from_int:
955 r1 = LO(~0x8000) (Z);
956 r1 = r0 & r1;
957 r0 = 1;
958 r0 = r1 - r0;
959 r2 = r1 & r0;
960 cc = r2 == 0;
961 /* Sync the root stage only from the outer interrupt level. */
962 if !cc jump .Lnosync;
963 r0.l = ___ipipe_sync_root;
964 r0.h = ___ipipe_sync_root;
965 [--sp] = reti;
966 [--sp] = rets;
967 [--sp] = ( r7:4, p5:3 );
968 SP += -12;
969 call ___ipipe_call_irqtail
970 SP += 12;
971 ( r7:4, p5:3 ) = [sp++];
972 rets = [sp++];
973 reti = [sp++];
974 .Lnosync:
975 rts
976 #elif defined(CONFIG_PREEMPT)
978 _resume_kernel_from_int:
979 /* check preempt_count */
980 r7 = sp;
981 r4.l = lo(ALIGN_PAGE_MASK);
982 r4.h = hi(ALIGN_PAGE_MASK);
983 r7 = r7 & r4;
984 p5 = r7;
985 r7 = [p5 + TI_PREEMPT];
986 cc = r7 == 0x0;
987 if !cc jump .Lreturn_to_kernel;
988 .Lneed_schedule:
989 r7 = [p5 + TI_FLAGS];
990 r4.l = lo(_TIF_WORK_MASK);
991 r4.h = hi(_TIF_WORK_MASK);
992 r7 = r7 & r4;
993 cc = BITTST(r7, TIF_NEED_RESCHED);
994 if !cc jump .Lreturn_to_kernel;
995 /*
996 * let schedule done at level 15, otherwise sheduled process will run
997 * at high level and block low level interrupt
998 */
999 r6 = reti; /* save reti */
1000 r5.l = .Lkernel_schedule;
1001 r5.h = .Lkernel_schedule;
1002 reti = r5;
1003 rti;
1004 .Lkernel_schedule:
1005 [--sp] = rets;
1006 sp += -12;
1007 pseudo_long_call _preempt_schedule_irq, p4;
1008 sp += 12;
1009 rets = [sp++];
1011 [--sp] = rets;
1012 sp += -12;
1013 /* up to irq14 so that reti after restore_all can return to irq15(kernel) */
1014 pseudo_long_call _up_to_irq14, p4;
1015 sp += 12;
1016 rets = [sp++];
1018 reti = r6; /* restore reti so that origin process can return to interrupted point */
1020 jump .Lneed_schedule;
1021 #else
1023 #define _resume_kernel_from_int .Lreturn_to_kernel
1024 #endif
1026 ENTRY(_return_from_int)
1027 /* If someone else already raised IRQ 15, do nothing. */
1028 csync;
1029 p2.l = lo(ILAT);
1030 p2.h = hi(ILAT);
1031 r0 = [p2];
1032 cc = bittst (r0, EVT_IVG15_P);
1033 if cc jump .Lreturn_to_kernel;
1035 /* if not return to user mode, get out */
1036 p2.l = lo(IPEND);
1037 p2.h = hi(IPEND);
1038 r0 = [p2];
1039 r1 = 0x17(Z);
1040 r2 = ~r1;
1041 r2.h = 0;
1042 r0 = r2 & r0;
1043 r1 = 1;
1044 r1 = r0 - r1;
1045 r2 = r0 & r1;
1046 cc = r2 == 0;
1047 if !cc jump _resume_kernel_from_int;
1049 /* Lower the interrupt level to 15. */
1050 p0.l = lo(EVT15);
1051 p0.h = hi(EVT15);
1052 p1.l = _schedule_and_signal_from_int;
1053 p1.h = _schedule_and_signal_from_int;
1054 [p0] = p1;
1055 csync;
1056 #if ANOMALY_05000281 || ANOMALY_05000461
1057 r0.l = lo(SAFE_USER_INSTRUCTION);
1058 r0.h = hi(SAFE_USER_INSTRUCTION);
1059 reti = r0;
1060 #endif
1061 r0 = 0x801f (z);
1062 STI r0;
1063 raise 15; /* raise evt15 to do signal or reschedule */
1064 rti;
1065 .Lreturn_to_kernel:
1066 rts;
1067 ENDPROC(_return_from_int)
1069 ENTRY(_lower_to_irq14)
1070 #if ANOMALY_05000281 || ANOMALY_05000461
1071 r0.l = lo(SAFE_USER_INSTRUCTION);
1072 r0.h = hi(SAFE_USER_INSTRUCTION);
1073 reti = r0;
1074 #endif
1076 #ifdef CONFIG_DEBUG_HWERR
1077 /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
1078 r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
1079 #else
1080 /* Only enable irq14 interrupt, until we transition to _evt_evt14 */
1081 r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
1082 #endif
1083 sti r0;
1084 raise 14;
1085 rti;
1086 ENDPROC(_lower_to_irq14)
1088 ENTRY(_evt_evt14)
1089 #ifdef CONFIG_DEBUG_HWERR
1090 r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
1091 sti r0;
1092 #else
1093 cli r0;
1094 #endif
1095 #ifdef CONFIG_TRACE_IRQFLAGS
1096 [--sp] = rets;
1097 sp += -12;
1098 call _trace_hardirqs_off;
1099 sp += 12;
1100 rets = [sp++];
1101 #endif
1102 [--sp] = RETI;
1103 SP += 4;
1104 rts;
1105 ENDPROC(_evt_evt14)
1107 ENTRY(_schedule_and_signal_from_int)
1108 /* To end up here, vector 15 was changed - so we have to change it
1109 * back.
1110 */
1111 p0.l = lo(EVT15);
1112 p0.h = hi(EVT15);
1113 p1.l = _evt_system_call;
1114 p1.h = _evt_system_call;
1115 [p0] = p1;
1116 csync;
1118 /* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */
1119 r0 = -1 (x);
1120 [sp + PT_ORIG_P0] = r0;
1122 p1 = rets;
1123 [sp + PT_RESERVED] = p1;
1125 #ifdef CONFIG_TRACE_IRQFLAGS
1126 /* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
1127 * is turned on, so disable all irqs. */
1128 cli r0;
1129 sp += -12;
1130 call _trace_hardirqs_on;
1131 sp += 12;
1132 #endif
1133 #ifdef CONFIG_SMP
1134 GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */
1135 r0 = [p0 + PDA_IRQFLAGS];
1136 #else
1137 p0.l = _bfin_irq_flags;
1138 p0.h = _bfin_irq_flags;
1139 r0 = [p0];
1140 #endif
1141 sti r0;
1143 /* finish the userspace "atomic" functions for it */
1144 r1 = FIXED_CODE_END;
1145 r2 = [sp + PT_PC];
1146 cc = r1 <= r2;
1147 if cc jump .Lresume_userspace (bp);
1149 r0 = sp;
1150 sp += -12;
1152 pseudo_long_call _finish_atomic_sections, p5;
1153 sp += 12;
1154 jump.s .Lresume_userspace;
1155 ENDPROC(_schedule_and_signal_from_int)
1157 ENTRY(_schedule_and_signal)
1158 SAVE_CONTEXT_SYSCALL
1159 /* To end up here, vector 15 was changed - so we have to change it
1160 * back.
1161 */
1162 p0.l = lo(EVT15);
1163 p0.h = hi(EVT15);
1164 p1.l = _evt_system_call;
1165 p1.h = _evt_system_call;
1166 [p0] = p1;
1167 csync;
1168 p0.l = 1f;
1169 p0.h = 1f;
1170 [sp + PT_RESERVED] = P0;
1171 call .Lresume_userspace;
1172 1:
1173 RESTORE_CONTEXT
1174 rti;
1175 ENDPROC(_schedule_and_signal)
1177 /* We handle this 100% in exception space - to reduce overhead
1178 * Only potiential problem is if the software buffer gets swapped out of the
1179 * CPLB table - then double fault. - so we don't let this happen in other places
1180 */
1181 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
1182 ENTRY(_ex_trace_buff_full)
1183 [--sp] = P3;
1184 [--sp] = P2;
1185 [--sp] = LC0;
1186 [--sp] = LT0;
1187 [--sp] = LB0;
1188 P5.L = _trace_buff_offset;
1189 P5.H = _trace_buff_offset;
1190 P3 = [P5]; /* trace_buff_offset */
1191 P5.L = lo(TBUFSTAT);
1192 P5.H = hi(TBUFSTAT);
1193 R7 = [P5];
1194 R7 <<= 1; /* double, since we need to read twice */
1195 LC0 = R7;
1196 R7 <<= 2; /* need to shift over again,
1197 * to get the number of bytes */
1198 P5.L = lo(TBUF);
1199 P5.H = hi(TBUF);
1200 R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
1202 P2 = R7;
1203 P3 = P3 + P2;
1204 R7 = P3;
1205 R7 = R7 & R6;
1206 P3 = R7;
1207 P2.L = _trace_buff_offset;
1208 P2.H = _trace_buff_offset;
1209 [P2] = P3;
1211 P2.L = _software_trace_buff;
1212 P2.H = _software_trace_buff;
1214 LSETUP (.Lstart, .Lend) LC0;
1215 .Lstart:
1216 R7 = [P5]; /* read TBUF */
1217 P4 = P3 + P2;
1218 [P4] = R7;
1219 P3 += -4;
1220 R7 = P3;
1221 R7 = R7 & R6;
1222 .Lend:
1223 P3 = R7;
1225 LB0 = [sp++];
1226 LT0 = [sp++];
1227 LC0 = [sp++];
1228 P2 = [sp++];
1229 P3 = [sp++];
1230 jump _bfin_return_from_exception;
1231 ENDPROC(_ex_trace_buff_full)
1233 #if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
1234 .data
1235 #else
1236 .section .l1.data.B
1237 #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
1238 ENTRY(_trace_buff_offset)
1239 .long 0;
1240 ALIGN
1241 ENTRY(_software_trace_buff)
1242 .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
1243 .long 0
1244 .endr
1245 #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
1247 #if CONFIG_EARLY_PRINTK
1248 __INIT
1249 ENTRY(_early_trap)
1250 SAVE_ALL_SYS
1251 trace_buffer_stop(p0,r0);
1253 ANOMALY_283_315_WORKAROUND(p4, r5)
1255 /* Turn caches off, to ensure we don't get double exceptions */
1257 P4.L = LO(IMEM_CONTROL);
1258 P4.H = HI(IMEM_CONTROL);
1260 R5 = [P4]; /* Control Register*/
1261 BITCLR(R5,ENICPLB_P);
1262 CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
1263 [P4] = R5;
1264 SSYNC;
1266 P4.L = LO(DMEM_CONTROL);
1267 P4.H = HI(DMEM_CONTROL);
1268 R5 = [P4];
1269 BITCLR(R5,ENDCPLB_P);
1270 CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
1271 [P4] = R5;
1272 SSYNC;
1274 r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
1275 r1 = RETX;
1277 SP += -12;
1278 call _early_trap_c;
1279 SP += 12;
1280 ENDPROC(_early_trap)
1281 __FINIT
1282 #endif /* CONFIG_EARLY_PRINTK */
1284 /*
1285 * Put these in the kernel data section - that should always be covered by
1286 * a CPLB. This is needed to ensure we don't get double fault conditions
1287 */
1289 #ifdef CONFIG_SYSCALL_TAB_L1
1290 .section .l1.data
1291 #else
1292 .data
1293 #endif
1295 ENTRY(_ex_table)
1296 /* entry for each EXCAUSE[5:0]
1297 * This table must be in sync with the table in ./kernel/traps.c
1298 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
1299 */
1300 .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
1301 .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
1302 #ifdef CONFIG_KGDB
1303 .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
1304 and break signal trap */
1305 #else
1306 .long _ex_replaceable /* 0x02 - User Defined */
1307 #endif
1308 .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
1309 .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
1310 .long _ex_replaceable /* 0x05 - User Defined */
1311 .long _ex_replaceable /* 0x06 - User Defined */
1312 .long _ex_replaceable /* 0x07 - User Defined */
1313 .long _ex_replaceable /* 0x08 - User Defined */
1314 .long _ex_replaceable /* 0x09 - User Defined */
1315 .long _ex_replaceable /* 0x0A - User Defined */
1316 .long _ex_replaceable /* 0x0B - User Defined */
1317 .long _ex_replaceable /* 0x0C - User Defined */
1318 .long _ex_replaceable /* 0x0D - User Defined */
1319 .long _ex_replaceable /* 0x0E - User Defined */
1320 .long _ex_replaceable /* 0x0F - User Defined */
1321 .long _ex_single_step /* 0x10 - HW Single step */
1322 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
1323 .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
1324 #else
1325 .long _ex_trap_c /* 0x11 - Trace Buffer Full */
1326 #endif
1327 .long _ex_trap_c /* 0x12 - Reserved */
1328 .long _ex_trap_c /* 0x13 - Reserved */
1329 .long _ex_trap_c /* 0x14 - Reserved */
1330 .long _ex_trap_c /* 0x15 - Reserved */
1331 .long _ex_trap_c /* 0x16 - Reserved */
1332 .long _ex_trap_c /* 0x17 - Reserved */
1333 .long _ex_trap_c /* 0x18 - Reserved */
1334 .long _ex_trap_c /* 0x19 - Reserved */
1335 .long _ex_trap_c /* 0x1A - Reserved */
1336 .long _ex_trap_c /* 0x1B - Reserved */
1337 .long _ex_trap_c /* 0x1C - Reserved */
1338 .long _ex_trap_c /* 0x1D - Reserved */
1339 .long _ex_trap_c /* 0x1E - Reserved */
1340 .long _ex_trap_c /* 0x1F - Reserved */
1341 .long _ex_trap_c /* 0x20 - Reserved */
1342 .long _ex_trap_c /* 0x21 - Undefined Instruction */
1343 .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
1344 .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */
1345 .long _ex_trap_c /* 0x24 - Data access misaligned */
1346 .long _ex_trap_c /* 0x25 - Unrecoverable Event */
1347 .long _ex_dmiss /* 0x26 - Data CPLB Miss */
1348 .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
1349 .long _ex_trap_c /* 0x28 - Emulation Watchpoint */
1350 .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
1351 .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
1352 .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */
1353 .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */
1354 .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
1355 .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
1356 .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
1357 .long _ex_trap_c /* 0x2F - Reserved */
1358 .long _ex_trap_c /* 0x30 - Reserved */
1359 .long _ex_trap_c /* 0x31 - Reserved */
1360 .long _ex_trap_c /* 0x32 - Reserved */
1361 .long _ex_trap_c /* 0x33 - Reserved */
1362 .long _ex_trap_c /* 0x34 - Reserved */
1363 .long _ex_trap_c /* 0x35 - Reserved */
1364 .long _ex_trap_c /* 0x36 - Reserved */
1365 .long _ex_trap_c /* 0x37 - Reserved */
1366 .long _ex_trap_c /* 0x38 - Reserved */
1367 .long _ex_trap_c /* 0x39 - Reserved */
1368 .long _ex_trap_c /* 0x3A - Reserved */
1369 .long _ex_trap_c /* 0x3B - Reserved */
1370 .long _ex_trap_c /* 0x3C - Reserved */
1371 .long _ex_trap_c /* 0x3D - Reserved */
1372 .long _ex_trap_c /* 0x3E - Reserved */
1373 .long _ex_trap_c /* 0x3F - Reserved */
1374 END(_ex_table)
1376 ENTRY(_sys_call_table)
1377 .long _sys_restart_syscall /* 0 */
1378 .long _sys_exit
1379 .long _sys_fork
1380 .long _sys_read
1381 .long _sys_write
1382 .long _sys_open /* 5 */
1383 .long _sys_close
1384 .long _sys_ni_syscall /* old waitpid */
1385 .long _sys_creat
1386 .long _sys_link
1387 .long _sys_unlink /* 10 */
1388 .long _sys_execve
1389 .long _sys_chdir
1390 .long _sys_time
1391 .long _sys_mknod
1392 .long _sys_chmod /* 15 */
1393 .long _sys_chown /* chown16 */
1394 .long _sys_ni_syscall /* old break syscall holder */
1395 .long _sys_ni_syscall /* old stat */
1396 .long _sys_lseek
1397 .long _sys_getpid /* 20 */
1398 .long _sys_mount
1399 .long _sys_ni_syscall /* old umount */
1400 .long _sys_setuid
1401 .long _sys_getuid
1402 .long _sys_stime /* 25 */
1403 .long _sys_ptrace
1404 .long _sys_alarm
1405 .long _sys_ni_syscall /* old fstat */
1406 .long _sys_pause
1407 .long _sys_ni_syscall /* old utime */ /* 30 */
1408 .long _sys_ni_syscall /* old stty syscall holder */
1409 .long _sys_ni_syscall /* old gtty syscall holder */
1410 .long _sys_access
1411 .long _sys_nice
1412 .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */
1413 .long _sys_sync
1414 .long _sys_kill
1415 .long _sys_rename
1416 .long _sys_mkdir
1417 .long _sys_rmdir /* 40 */
1418 .long _sys_dup
1419 .long _sys_pipe
1420 .long _sys_times
1421 .long _sys_ni_syscall /* old prof syscall holder */
1422 .long _sys_brk /* 45 */
1423 .long _sys_setgid
1424 .long _sys_getgid
1425 .long _sys_ni_syscall /* old sys_signal */
1426 .long _sys_geteuid /* geteuid16 */
1427 .long _sys_getegid /* getegid16 */ /* 50 */
1428 .long _sys_acct
1429 .long _sys_umount /* recycled never used phys() */
1430 .long _sys_ni_syscall /* old lock syscall holder */
1431 .long _sys_ioctl
1432 .long _sys_fcntl /* 55 */
1433 .long _sys_ni_syscall /* old mpx syscall holder */
1434 .long _sys_setpgid
1435 .long _sys_ni_syscall /* old ulimit syscall holder */
1436 .long _sys_ni_syscall /* old old uname */
1437 .long _sys_umask /* 60 */
1438 .long _sys_chroot
1439 .long _sys_ustat
1440 .long _sys_dup2
1441 .long _sys_getppid
1442 .long _sys_getpgrp /* 65 */
1443 .long _sys_setsid
1444 .long _sys_ni_syscall /* old sys_sigaction */
1445 .long _sys_sgetmask
1446 .long _sys_ssetmask
1447 .long _sys_setreuid /* setreuid16 */ /* 70 */
1448 .long _sys_setregid /* setregid16 */
1449 .long _sys_ni_syscall /* old sys_sigsuspend */
1450 .long _sys_ni_syscall /* old sys_sigpending */
1451 .long _sys_sethostname
1452 .long _sys_setrlimit /* 75 */
1453 .long _sys_ni_syscall /* old getrlimit */
1454 .long _sys_getrusage
1455 .long _sys_gettimeofday
1456 .long _sys_settimeofday
1457 .long _sys_getgroups /* getgroups16 */ /* 80 */
1458 .long _sys_setgroups /* setgroups16 */
1459 .long _sys_ni_syscall /* old_select */
1460 .long _sys_symlink
1461 .long _sys_ni_syscall /* old lstat */
1462 .long _sys_readlink /* 85 */
1463 .long _sys_uselib
1464 .long _sys_ni_syscall /* sys_swapon */
1465 .long _sys_reboot
1466 .long _sys_ni_syscall /* old_readdir */
1467 .long _sys_ni_syscall /* sys_mmap */ /* 90 */
1468 .long _sys_munmap
1469 .long _sys_truncate
1470 .long _sys_ftruncate
1471 .long _sys_fchmod
1472 .long _sys_fchown /* fchown16 */ /* 95 */
1473 .long _sys_getpriority
1474 .long _sys_setpriority
1475 .long _sys_ni_syscall /* old profil syscall holder */
1476 .long _sys_statfs
1477 .long _sys_fstatfs /* 100 */
1478 .long _sys_ni_syscall
1479 .long _sys_ni_syscall /* old sys_socketcall */
1480 .long _sys_syslog
1481 .long _sys_setitimer
1482 .long _sys_getitimer /* 105 */
1483 .long _sys_newstat
1484 .long _sys_newlstat
1485 .long _sys_newfstat
1486 .long _sys_ni_syscall /* old uname */
1487 .long _sys_ni_syscall /* iopl for i386 */ /* 110 */
1488 .long _sys_vhangup
1489 .long _sys_ni_syscall /* obsolete idle() syscall */
1490 .long _sys_ni_syscall /* vm86old for i386 */
1491 .long _sys_wait4
1492 .long _sys_ni_syscall /* 115 */ /* sys_swapoff */
1493 .long _sys_sysinfo
1494 .long _sys_ni_syscall /* old sys_ipc */
1495 .long _sys_fsync
1496 .long _sys_ni_syscall /* old sys_sigreturn */
1497 .long _sys_clone /* 120 */
1498 .long _sys_setdomainname
1499 .long _sys_newuname
1500 .long _sys_ni_syscall /* old sys_modify_ldt */
1501 .long _sys_adjtimex
1502 .long _sys_mprotect /* 125 */
1503 .long _sys_ni_syscall /* old sys_sigprocmask */
1504 .long _sys_ni_syscall /* old "creat_module" */
1505 .long _sys_init_module
1506 .long _sys_delete_module
1507 .long _sys_ni_syscall /* 130: old "get_kernel_syms" */
1508 .long _sys_quotactl
1509 .long _sys_getpgid
1510 .long _sys_fchdir
1511 .long _sys_bdflush
1512 .long _sys_ni_syscall /* 135 */ /* sys_sysfs */
1513 .long _sys_personality
1514 .long _sys_ni_syscall /* for afs_syscall */
1515 .long _sys_setfsuid /* setfsuid16 */
1516 .long _sys_setfsgid /* setfsgid16 */
1517 .long _sys_llseek /* 140 */
1518 .long _sys_getdents
1519 .long _sys_ni_syscall /* sys_select */
1520 .long _sys_flock
1521 .long _sys_msync
1522 .long _sys_readv /* 145 */
1523 .long _sys_writev
1524 .long _sys_getsid
1525 .long _sys_fdatasync
1526 .long _sys_sysctl
1527 .long _sys_mlock /* 150 */
1528 .long _sys_munlock
1529 .long _sys_mlockall
1530 .long _sys_munlockall
1531 .long _sys_sched_setparam
1532 .long _sys_sched_getparam /* 155 */
1533 .long _sys_sched_setscheduler
1534 .long _sys_sched_getscheduler
1535 .long _sys_sched_yield
1536 .long _sys_sched_get_priority_max
1537 .long _sys_sched_get_priority_min /* 160 */
1538 .long _sys_sched_rr_get_interval
1539 .long _sys_nanosleep
1540 .long _sys_mremap
1541 .long _sys_setresuid /* setresuid16 */
1542 .long _sys_getresuid /* getresuid16 */ /* 165 */
1543 .long _sys_ni_syscall /* for vm86 */
1544 .long _sys_ni_syscall /* old "query_module" */
1545 .long _sys_ni_syscall /* sys_poll */
1546 .long _sys_nfsservctl
1547 .long _sys_setresgid /* setresgid16 */ /* 170 */
1548 .long _sys_getresgid /* getresgid16 */
1549 .long _sys_prctl
1550 .long _sys_rt_sigreturn
1551 .long _sys_rt_sigaction
1552 .long _sys_rt_sigprocmask /* 175 */
1553 .long _sys_rt_sigpending
1554 .long _sys_rt_sigtimedwait
1555 .long _sys_rt_sigqueueinfo
1556 .long _sys_rt_sigsuspend
1557 .long _sys_pread64 /* 180 */
1558 .long _sys_pwrite64
1559 .long _sys_lchown /* lchown16 */
1560 .long _sys_getcwd
1561 .long _sys_capget
1562 .long _sys_capset /* 185 */
1563 .long _sys_sigaltstack
1564 .long _sys_sendfile
1565 .long _sys_ni_syscall /* streams1 */
1566 .long _sys_ni_syscall /* streams2 */
1567 .long _sys_vfork /* 190 */
1568 .long _sys_getrlimit
1569 .long _sys_mmap_pgoff
1570 .long _sys_truncate64
1571 .long _sys_ftruncate64
1572 .long _sys_stat64 /* 195 */
1573 .long _sys_lstat64
1574 .long _sys_fstat64
1575 .long _sys_chown
1576 .long _sys_getuid
1577 .long _sys_getgid /* 200 */
1578 .long _sys_geteuid
1579 .long _sys_getegid
1580 .long _sys_setreuid
1581 .long _sys_setregid
1582 .long _sys_getgroups /* 205 */
1583 .long _sys_setgroups
1584 .long _sys_fchown
1585 .long _sys_setresuid
1586 .long _sys_getresuid
1587 .long _sys_setresgid /* 210 */
1588 .long _sys_getresgid
1589 .long _sys_lchown
1590 .long _sys_setuid
1591 .long _sys_setgid
1592 .long _sys_setfsuid /* 215 */
1593 .long _sys_setfsgid
1594 .long _sys_pivot_root
1595 .long _sys_mincore
1596 .long _sys_madvise
1597 .long _sys_getdents64 /* 220 */
1598 .long _sys_fcntl64
1599 .long _sys_ni_syscall /* reserved for TUX */
1600 .long _sys_ni_syscall
1601 .long _sys_gettid
1602 .long _sys_readahead /* 225 */
1603 .long _sys_setxattr
1604 .long _sys_lsetxattr
1605 .long _sys_fsetxattr
1606 .long _sys_getxattr
1607 .long _sys_lgetxattr /* 230 */
1608 .long _sys_fgetxattr
1609 .long _sys_listxattr
1610 .long _sys_llistxattr
1611 .long _sys_flistxattr
1612 .long _sys_removexattr /* 235 */
1613 .long _sys_lremovexattr
1614 .long _sys_fremovexattr
1615 .long _sys_tkill
1616 .long _sys_sendfile64
1617 .long _sys_futex /* 240 */
1618 .long _sys_sched_setaffinity
1619 .long _sys_sched_getaffinity
1620 .long _sys_ni_syscall /* sys_set_thread_area */
1621 .long _sys_ni_syscall /* sys_get_thread_area */
1622 .long _sys_io_setup /* 245 */
1623 .long _sys_io_destroy
1624 .long _sys_io_getevents
1625 .long _sys_io_submit
1626 .long _sys_io_cancel
1627 .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */
1628 .long _sys_ni_syscall /* sys_freec_hugepages */
1629 .long _sys_exit_group
1630 .long _sys_lookup_dcookie
1631 .long _sys_bfin_spinlock
1632 .long _sys_epoll_create /* 255 */
1633 .long _sys_epoll_ctl
1634 .long _sys_epoll_wait
1635 .long _sys_ni_syscall /* remap_file_pages */
1636 .long _sys_set_tid_address
1637 .long _sys_timer_create /* 260 */
1638 .long _sys_timer_settime
1639 .long _sys_timer_gettime
1640 .long _sys_timer_getoverrun
1641 .long _sys_timer_delete
1642 .long _sys_clock_settime /* 265 */
1643 .long _sys_clock_gettime
1644 .long _sys_clock_getres
1645 .long _sys_clock_nanosleep
1646 .long _sys_statfs64
1647 .long _sys_fstatfs64 /* 270 */
1648 .long _sys_tgkill
1649 .long _sys_utimes
1650 .long _sys_fadvise64_64
1651 .long _sys_ni_syscall /* vserver */
1652 .long _sys_mbind /* 275 */
1653 .long _sys_ni_syscall /* get_mempolicy */
1654 .long _sys_ni_syscall /* set_mempolicy */
1655 .long _sys_mq_open
1656 .long _sys_mq_unlink
1657 .long _sys_mq_timedsend /* 280 */
1658 .long _sys_mq_timedreceive
1659 .long _sys_mq_notify
1660 .long _sys_mq_getsetattr
1661 .long _sys_ni_syscall /* kexec_load */
1662 .long _sys_waitid /* 285 */
1663 .long _sys_add_key
1664 .long _sys_request_key
1665 .long _sys_keyctl
1666 .long _sys_ioprio_set
1667 .long _sys_ioprio_get /* 290 */
1668 .long _sys_inotify_init
1669 .long _sys_inotify_add_watch
1670 .long _sys_inotify_rm_watch
1671 .long _sys_ni_syscall /* migrate_pages */
1672 .long _sys_openat /* 295 */
1673 .long _sys_mkdirat
1674 .long _sys_mknodat
1675 .long _sys_fchownat
1676 .long _sys_futimesat
1677 .long _sys_fstatat64 /* 300 */
1678 .long _sys_unlinkat
1679 .long _sys_renameat
1680 .long _sys_linkat
1681 .long _sys_symlinkat
1682 .long _sys_readlinkat /* 305 */
1683 .long _sys_fchmodat
1684 .long _sys_faccessat
1685 .long _sys_pselect6
1686 .long _sys_ppoll
1687 .long _sys_unshare /* 310 */
1688 .long _sys_sram_alloc
1689 .long _sys_sram_free
1690 .long _sys_dma_memcpy
1691 .long _sys_accept
1692 .long _sys_bind /* 315 */
1693 .long _sys_connect
1694 .long _sys_getpeername
1695 .long _sys_getsockname
1696 .long _sys_getsockopt
1697 .long _sys_listen /* 320 */
1698 .long _sys_recv
1699 .long _sys_recvfrom
1700 .long _sys_recvmsg
1701 .long _sys_send
1702 .long _sys_sendmsg /* 325 */
1703 .long _sys_sendto
1704 .long _sys_setsockopt
1705 .long _sys_shutdown
1706 .long _sys_socket
1707 .long _sys_socketpair /* 330 */
1708 .long _sys_semctl
1709 .long _sys_semget
1710 .long _sys_semop
1711 .long _sys_msgctl
1712 .long _sys_msgget /* 335 */
1713 .long _sys_msgrcv
1714 .long _sys_msgsnd
1715 .long _sys_shmat
1716 .long _sys_shmctl
1717 .long _sys_shmdt /* 340 */
1718 .long _sys_shmget
1719 .long _sys_splice
1720 .long _sys_sync_file_range
1721 .long _sys_tee
1722 .long _sys_vmsplice /* 345 */
1723 .long _sys_epoll_pwait
1724 .long _sys_utimensat
1725 .long _sys_signalfd
1726 .long _sys_timerfd_create
1727 .long _sys_eventfd /* 350 */
1728 .long _sys_pread64
1729 .long _sys_pwrite64
1730 .long _sys_fadvise64
1731 .long _sys_set_robust_list
1732 .long _sys_get_robust_list /* 355 */
1733 .long _sys_fallocate
1734 .long _sys_semtimedop
1735 .long _sys_timerfd_settime
1736 .long _sys_timerfd_gettime
1737 .long _sys_signalfd4 /* 360 */
1738 .long _sys_eventfd2
1739 .long _sys_epoll_create1
1740 .long _sys_dup3
1741 .long _sys_pipe2
1742 .long _sys_inotify_init1 /* 365 */
1743 .long _sys_preadv
1744 .long _sys_pwritev
1745 .long _sys_rt_tgsigqueueinfo
1746 .long _sys_perf_event_open
1747 .long _sys_recvmmsg /* 370 */
1748 .long _sys_fanotify_init
1749 .long _sys_fanotify_mark
1750 .long _sys_prlimit64
1751 .long _sys_cacheflush
1752 .long _sys_name_to_handle_at /* 375 */
1753 .long _sys_open_by_handle_at
1754 .long _sys_clock_adjtime
1755 .long _sys_syncfs
1757 .rept NR_syscalls-(.-_sys_call_table)/4
1758 .long _sys_ni_syscall
1759 .endr
1760 END(_sys_call_table)