2 * Char device interface.
4 * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice (including the next
14 * paragraph) shall be included in all copies or substantial portions of the
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
23 * DEALINGS IN THE SOFTWARE.
26 #ifndef _LINUX_FIREWIRE_CDEV_H
27 #define _LINUX_FIREWIRE_CDEV_H
29 #include <linux/ioctl.h>
30 #include <linux/types.h>
31 #include <linux/firewire-constants.h>
33 #define FW_CDEV_EVENT_BUS_RESET 0x00
34 #define FW_CDEV_EVENT_RESPONSE 0x01
35 #define FW_CDEV_EVENT_REQUEST 0x02
36 #define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
37 #define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04
38 #define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05
41 * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
42 * @closure: For arbitrary use by userspace
43 * @type: Discriminates the fw_cdev_event_ types
45 * This struct may be used to access generic members of all fw_cdev_event_
46 * types regardless of the specific type.
48 * Data passed in the @closure field for a request will be returned in the
49 * corresponding event. It is big enough to hold a pointer on all platforms.
50 * The ioctl used to set @closure depends on the @type of event.
52 struct fw_cdev_event_common
{
58 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
59 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
60 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
61 * @node_id: New node ID of this node
62 * @local_node_id: Node ID of the local node, i.e. of the controller
63 * @bm_node_id: Node ID of the bus manager
64 * @irm_node_id: Node ID of the iso resource manager
65 * @root_node_id: Node ID of the root node
66 * @generation: New bus generation
68 * This event is sent when the bus the device belongs to goes through a bus
69 * reset. It provides information about the new bus configuration, such as
70 * new node ID for this device, new root ID, and others.
72 struct fw_cdev_event_bus_reset
{
84 * struct fw_cdev_event_response - Sent when a response packet was received
85 * @closure: See &fw_cdev_event_common;
86 * set by %FW_CDEV_IOC_SEND_REQUEST ioctl
87 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
88 * @rcode: Response code returned by the remote node
89 * @length: Data length, i.e. the response's payload size in bytes
90 * @data: Payload data, if any
92 * This event is sent when the stack receives a response to an outgoing request
93 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses
94 * carrying data (read and lock responses) follows immediately and can be
95 * accessed through the @data field.
97 struct fw_cdev_event_response
{
106 * struct fw_cdev_event_request - Sent on incoming request to an address region
107 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
108 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
109 * @tcode: Transaction code of the incoming request
110 * @offset: The offset into the 48-bit per-node address space
111 * @handle: Reference to the kernel-side pending request
112 * @length: Data length, i.e. the request's payload size in bytes
113 * @data: Incoming data, if any
115 * This event is sent when the stack receives an incoming request to an address
116 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is
117 * guaranteed to be completely contained in the specified region. Userspace is
118 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
119 * using the same @handle.
121 * The payload data for requests carrying data (write and lock requests)
122 * follows immediately and can be accessed through the @data field.
124 struct fw_cdev_event_request
{
135 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
136 * @closure: See &fw_cdev_event_common;
137 * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
138 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
139 * @cycle: Cycle counter of the interrupt packet
140 * @header_length: Total length of following headers, in bytes
141 * @header: Stripped headers, if any
143 * This event is sent when the controller has completed an &fw_cdev_iso_packet
144 * with the %FW_CDEV_ISO_INTERRUPT bit set. In the receive case, the headers
145 * stripped of all packets up until and including the interrupt packet are
146 * returned in the @header field. The amount of header data per packet is as
147 * specified at iso context creation by &fw_cdev_create_iso_context.header_size.
149 * In version 1 of this ABI, header data consisted of the 1394 isochronous
150 * packet header, followed by quadlets from the packet payload if
151 * &fw_cdev_create_iso_context.header_size > 4.
153 * In version 2 of this ABI, header data consist of the 1394 isochronous
154 * packet header, followed by a timestamp quadlet if
155 * &fw_cdev_create_iso_context.header_size > 4, followed by quadlets from the
156 * packet payload if &fw_cdev_create_iso_context.header_size > 8.
158 * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
160 * Format of 1394 iso packet header: 16 bits len, 2 bits tag, 6 bits channel,
161 * 4 bits tcode, 4 bits sy, in big endian byte order. Format of timestamp:
162 * 16 bits invalid, 3 bits cycleSeconds, 13 bits cycleCount, in big endian byte
165 struct fw_cdev_event_iso_interrupt
{
174 * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
175 * @closure: See &fw_cdev_event_common;
176 * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
177 * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
178 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
179 * @handle: Reference by which an allocated resource can be deallocated
180 * @channel: Isochronous channel which was (de)allocated, if any
181 * @bandwidth: Bandwidth allocation units which were (de)allocated, if any
183 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
184 * resource was allocated at the IRM. The client has to check @channel and
185 * @bandwidth for whether the allocation actually succeeded.
187 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
188 * resource was deallocated at the IRM. It is also sent when automatic
189 * reallocation after a bus reset failed.
191 * @channel is <0 if no channel was (de)allocated or if reallocation failed.
192 * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
194 struct fw_cdev_event_iso_resource
{
203 * union fw_cdev_event - Convenience union of fw_cdev_event_ types
204 * @common: Valid for all types
205 * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
206 * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
207 * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST
208 * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
209 * @iso_resource: Valid if @common.type ==
210 * %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
211 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
213 * Convenience union for userspace use. Events could be read(2) into an
214 * appropriately aligned char buffer and then cast to this union for further
215 * processing. Note that for a request, response or iso_interrupt event,
216 * the data[] or header[] may make the size of the full event larger than
217 * sizeof(union fw_cdev_event). Also note that if you attempt to read(2)
218 * an event into a buffer that is not large enough for it, the data that does
219 * not fit will be discarded so that the next read(2) will return a new event.
221 union fw_cdev_event
{
222 struct fw_cdev_event_common common
;
223 struct fw_cdev_event_bus_reset bus_reset
;
224 struct fw_cdev_event_response response
;
225 struct fw_cdev_event_request request
;
226 struct fw_cdev_event_iso_interrupt iso_interrupt
;
227 struct fw_cdev_event_iso_resource iso_resource
;
230 /* available since kernel version 2.6.22 */
231 #define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info)
232 #define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request)
233 #define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate)
234 #define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate)
235 #define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response)
236 #define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
237 #define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
238 #define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
239 #define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
240 #define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso)
241 #define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso)
242 #define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso)
244 /* available since kernel version 2.6.24 */
245 #define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
247 /* available since kernel version 2.6.30 */
248 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
249 #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE _IOW('#', 0x0e, struct fw_cdev_deallocate)
250 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
251 #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
252 #define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */
253 #define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request)
254 #define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
256 /* available since kernel version 2.6.34 */
257 #define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
260 * FW_CDEV_VERSION History
261 * 1 (2.6.22) - initial version
262 * 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if
263 * &fw_cdev_create_iso_context.header_size is 8 or more
264 * (2.6.32) - added time stamp to xmit &fw_cdev_event_iso_interrupt
265 * (2.6.33) - IR has always packet-per-buffer semantics now, not one of
266 * dual-buffer or packet-per-buffer depending on hardware
267 * 3 (2.6.34) - made &fw_cdev_get_cycle_timer reliable
269 #define FW_CDEV_VERSION 3
272 * struct fw_cdev_get_info - General purpose information ioctl
273 * @version: The version field is just a running serial number.
274 * We never break backwards compatibility, but may add more
275 * structs and ioctls in later revisions.
276 * @rom_length: If @rom is non-zero, at most rom_length bytes of configuration
277 * ROM will be copied into that user space address. In either
278 * case, @rom_length is updated with the actual length of the
280 * @rom: If non-zero, address of a buffer to be filled by a copy of the
281 * device's configuration ROM
282 * @bus_reset: If non-zero, address of a buffer to be filled by a
283 * &struct fw_cdev_event_bus_reset with the current state
284 * of the bus. This does not cause a bus reset to happen.
285 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
286 * @card: The index of the card this device belongs to
288 struct fw_cdev_get_info
{
293 __u64 bus_reset_closure
;
298 * struct fw_cdev_send_request - Send an asynchronous request packet
299 * @tcode: Transaction code of the request
300 * @length: Length of outgoing payload, in bytes
301 * @offset: 48-bit offset at destination node
302 * @closure: Passed back to userspace in the response event
303 * @data: Userspace pointer to payload
304 * @generation: The bus generation where packet is valid
306 * Send a request to the device. This ioctl implements all outgoing requests.
307 * Both quadlet and block request specify the payload as a pointer to the data
308 * in the @data field. Once the transaction completes, the kernel writes an
309 * &fw_cdev_event_response event back. The @closure field is passed back to
310 * user space in the response event.
312 struct fw_cdev_send_request
{
322 * struct fw_cdev_send_response - Send an asynchronous response packet
323 * @rcode: Response code as determined by the userspace handler
324 * @length: Length of outgoing payload, in bytes
325 * @data: Userspace pointer to payload
326 * @handle: The handle from the &fw_cdev_event_request
328 * Send a response to an incoming request. By setting up an address range using
329 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An
330 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
331 * send a reply using this ioctl. The event has a handle to the kernel-side
332 * pending transaction, which should be used with this ioctl.
334 struct fw_cdev_send_response
{
342 * struct fw_cdev_allocate - Allocate a CSR address range
343 * @offset: Start offset of the address range
344 * @closure: To be passed back to userspace in request events
345 * @length: Length of the address range, in bytes
346 * @handle: Handle to the allocation, written by the kernel
348 * Allocate an address range in the 48-bit address space on the local node
349 * (the controller). This allows userspace to listen for requests with an
350 * offset within that address range. When the kernel receives a request
351 * within the range, an &fw_cdev_event_request event will be written back.
352 * The @closure field is passed back to userspace in the response event.
353 * The @handle field is an out parameter, returning a handle to the allocated
354 * range to be used for later deallocation of the range.
356 * The address range is allocated on all local nodes. The address allocation
357 * is exclusive except for the FCP command and response registers.
359 struct fw_cdev_allocate
{
367 * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
368 * @handle: Handle to the address range or iso resource, as returned by the
369 * kernel when the range or resource was allocated
371 struct fw_cdev_deallocate
{
375 #define FW_CDEV_LONG_RESET 0
376 #define FW_CDEV_SHORT_RESET 1
379 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
380 * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
382 * Initiate a bus reset for the bus this device is on. The bus reset can be
383 * either the original (long) bus reset or the arbitrated (short) bus reset
384 * introduced in 1394a-2000.
386 struct fw_cdev_initiate_bus_reset
{
387 __u32 type
; /* FW_CDEV_SHORT_RESET or FW_CDEV_LONG_RESET */
391 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
392 * @immediate: If non-zero, immediate key to insert before pointer
393 * @key: Upper 8 bits of root directory pointer
394 * @data: Userspace pointer to contents of descriptor block
395 * @length: Length of descriptor block data, in quadlets
396 * @handle: Handle to the descriptor, written by the kernel
398 * Add a descriptor block and optionally a preceding immediate key to the local
399 * node's configuration ROM.
401 * The @key field specifies the upper 8 bits of the descriptor root directory
402 * pointer and the @data and @length fields specify the contents. The @key
403 * should be of the form 0xXX000000. The offset part of the root directory entry
404 * will be filled in by the kernel.
406 * If not 0, the @immediate field specifies an immediate key which will be
407 * inserted before the root directory pointer.
409 * @immediate, @key, and @data array elements are CPU-endian quadlets.
411 * If successful, the kernel adds the descriptor and writes back a handle to the
412 * kernel-side object to be used for later removal of the descriptor block and
415 * This ioctl affects the configuration ROMs of all local nodes.
416 * The ioctl only succeeds on device files which represent a local node.
418 struct fw_cdev_add_descriptor
{
427 * struct fw_cdev_remove_descriptor - Remove contents from the configuration ROM
428 * @handle: Handle to the descriptor, as returned by the kernel when the
429 * descriptor was added
431 * Remove a descriptor block and accompanying immediate key from the local
432 * nodes' configuration ROMs.
434 struct fw_cdev_remove_descriptor
{
438 #define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
439 #define FW_CDEV_ISO_CONTEXT_RECEIVE 1
442 * struct fw_cdev_create_iso_context - Create a context for isochronous IO
443 * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE
444 * @header_size: Header size to strip for receive contexts
445 * @channel: Channel to bind to
446 * @speed: Speed for transmit contexts
447 * @closure: To be returned in &fw_cdev_event_iso_interrupt
448 * @handle: Handle to context, written back by kernel
450 * Prior to sending or receiving isochronous I/O, a context must be created.
451 * The context records information about the transmit or receive configuration
452 * and typically maps to an underlying hardware resource. A context is set up
453 * for either sending or receiving. It is bound to a specific isochronous
456 * If a context was successfully created, the kernel writes back a handle to the
457 * context, which must be passed in for subsequent operations on that context.
459 * For receive contexts, @header_size must be at least 4 and must be a multiple
462 * Note that the effect of a @header_size > 4 depends on
463 * &fw_cdev_get_info.version, as documented at &fw_cdev_event_iso_interrupt.
465 struct fw_cdev_create_iso_context
{
474 #define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v)
475 #define FW_CDEV_ISO_INTERRUPT (1 << 16)
476 #define FW_CDEV_ISO_SKIP (1 << 17)
477 #define FW_CDEV_ISO_SYNC (1 << 17)
478 #define FW_CDEV_ISO_TAG(v) ((v) << 18)
479 #define FW_CDEV_ISO_SY(v) ((v) << 20)
480 #define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24)
483 * struct fw_cdev_iso_packet - Isochronous packet
484 * @control: Contains the header length (8 uppermost bits), the sy field
485 * (4 bits), the tag field (2 bits), a sync flag (1 bit),
486 * a skip flag (1 bit), an interrupt flag (1 bit), and the
487 * payload length (16 lowermost bits)
488 * @header: Header and payload
490 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
492 * Use the FW_CDEV_ISO_ macros to fill in @control.
494 * For transmit packets, the header length must be a multiple of 4 and specifies
495 * the numbers of bytes in @header that will be prepended to the packet's
496 * payload; these bytes are copied into the kernel and will not be accessed
497 * after the ioctl has returned. The sy and tag fields are copied to the iso
498 * packet header (these fields are specified by IEEE 1394a and IEC 61883-1).
499 * The skip flag specifies that no packet is to be sent in a frame; when using
500 * this, all other fields except the interrupt flag must be zero.
502 * For receive packets, the header length must be a multiple of the context's
503 * header size; if the header length is larger than the context's header size,
504 * multiple packets are queued for this entry. The sy and tag fields are
505 * ignored. If the sync flag is set, the context drops all packets until
506 * a packet with a matching sy field is received (the sync value to wait for is
507 * specified in the &fw_cdev_start_iso structure). The payload length defines
508 * how many payload bytes can be received for one packet (in addition to payload
509 * quadlets that have been defined as headers and are stripped and returned in
510 * the &fw_cdev_event_iso_interrupt structure). If more bytes are received, the
511 * additional bytes are dropped. If less bytes are received, the remaining
512 * bytes in this part of the payload buffer will not be written to, not even by
513 * the next packet, i.e., packets received in consecutive frames will not
514 * necessarily be consecutive in memory. If an entry has queued multiple
515 * packets, the payload length is divided equally among them.
517 * When a packet with the interrupt flag set has been completed, the
518 * &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued
519 * multiple receive packets is completed when its last packet is completed.
521 struct fw_cdev_iso_packet
{
527 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
528 * @packets: Userspace pointer to packet data
529 * @data: Pointer into mmap()'ed payload buffer
530 * @size: Size of packet data in bytes
531 * @handle: Isochronous context handle
533 * Queue a number of isochronous packets for reception or transmission.
534 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
535 * which describe how to transmit from or receive into a contiguous region
536 * of a mmap()'ed payload buffer. As part of transmit packet descriptors,
537 * a series of headers can be supplied, which will be prepended to the
538 * payload during DMA.
540 * The kernel may or may not queue all packets, but will write back updated
541 * values of the @packets, @data and @size fields, so the ioctl can be
542 * resubmitted easily.
544 struct fw_cdev_queue_iso
{
551 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
552 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
553 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
554 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
555 #define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
558 * struct fw_cdev_start_iso - Start an isochronous transmission or reception
559 * @cycle: Cycle in which to start I/O. If @cycle is greater than or
560 * equal to 0, the I/O will start on that cycle.
561 * @sync: Determines the value to wait for for receive packets that have
562 * the %FW_CDEV_ISO_SYNC bit set
563 * @tags: Tag filter bit mask. Only valid for isochronous reception.
564 * Determines the tag values for which packets will be accepted.
565 * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
566 * @handle: Isochronous context handle within which to transmit or receive
568 struct fw_cdev_start_iso
{
576 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
577 * @handle: Handle of isochronous context to stop
579 struct fw_cdev_stop_iso
{
584 * struct fw_cdev_get_cycle_timer - read cycle timer register
585 * @local_time: system time, in microseconds since the Epoch
586 * @cycle_timer: Cycle Time register contents
588 * The %FW_CDEV_IOC_GET_CYCLE_TIMER ioctl reads the isochronous cycle timer
589 * and also the system clock (%CLOCK_REALTIME). This allows to express the
590 * receive time of an isochronous packet as a system time.
592 * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
593 * 12 bits cycleOffset, in host byte order. Cf. the Cycle Time register
594 * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
596 * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
597 * monotonic) @cycle_timer values on certain controllers.
599 struct fw_cdev_get_cycle_timer
{
605 * struct fw_cdev_get_cycle_timer2 - read cycle timer register
606 * @tv_sec: system time, seconds
607 * @tv_nsec: system time, sub-seconds part in nanoseconds
608 * @clk_id: input parameter, clock from which to get the system time
609 * @cycle_timer: Cycle Time register contents
611 * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 works like
612 * %FW_CDEV_IOC_GET_CYCLE_TIMER but lets you choose a clock like with POSIX'
613 * clock_gettime function. Supported @clk_id values are POSIX' %CLOCK_REALTIME
614 * and %CLOCK_MONOTONIC and Linux' %CLOCK_MONOTONIC_RAW.
616 struct fw_cdev_get_cycle_timer2
{
624 * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
625 * @closure: Passed back to userspace in correponding iso resource events
626 * @channels: Isochronous channels of which one is to be (de)allocated
627 * @bandwidth: Isochronous bandwidth units to be (de)allocated
628 * @handle: Handle to the allocation, written by the kernel (only valid in
629 * case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
631 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
632 * isochronous channel and/or of isochronous bandwidth at the isochronous
633 * resource manager (IRM). Only one of the channels specified in @channels is
634 * allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
635 * communication with the IRM, indicating success or failure in the event data.
636 * The kernel will automatically reallocate the resources after bus resets.
637 * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
638 * will be sent. The kernel will also automatically deallocate the resources
639 * when the file descriptor is closed.
641 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
642 * deallocation of resources which were allocated as described above.
643 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
645 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
646 * without automatic re- or deallocation.
647 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
648 * indicating success or failure in its data.
650 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
651 * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
652 * instead of allocated.
653 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
655 * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
656 * for the lifetime of the fd or @handle.
657 * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
658 * for the duration of a bus generation.
660 * @channels is a host-endian bitfield with the least significant bit
661 * representing channel 0 and the most significant bit representing channel 63:
662 * 1ULL << c for each channel c that is a candidate for (de)allocation.
664 * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
665 * one quadlet of data (payload or header data) at speed S1600.
667 struct fw_cdev_allocate_iso_resource
{
675 * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
676 * @length: Length of outgoing payload, in bytes
677 * @tag: Data format tag
678 * @channel: Isochronous channel to transmit to
679 * @sy: Synchronization code
680 * @closure: Passed back to userspace in the response event
681 * @data: Userspace pointer to payload
682 * @generation: The bus generation where packet is valid
683 * @speed: Speed to transmit at
685 * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
686 * to every device which is listening to the specified channel. The kernel
687 * writes an &fw_cdev_event_response event which indicates success or failure of
690 struct fw_cdev_send_stream_packet
{
701 #endif /* _LINUX_FIREWIRE_CDEV_H */