1 /* USB OTG (On The Go) defines */
4 * These APIs may be used between USB controllers. USB device drivers
5 * (for either host or peripheral roles) don't use these calls; they
6 * continue to use just usb_device and usb_gadget.
9 #ifndef __LINUX_USB_OTG_H
10 #define __LINUX_USB_OTG_H
12 #include <linux/notifier.h>
14 /* OTG defines lots of enumeration states before device reset */
16 OTG_STATE_UNDEFINED
= 0,
18 /* single-role peripheral, and dual-role default-b */
21 OTG_STATE_B_PERIPHERAL
,
23 /* extra dual-role default-b states */
24 OTG_STATE_B_WAIT_ACON
,
27 /* dual-role default-a */
29 OTG_STATE_A_WAIT_VRISE
,
30 OTG_STATE_A_WAIT_BCON
,
33 OTG_STATE_A_PERIPHERAL
,
34 OTG_STATE_A_WAIT_VFALL
,
38 enum usb_xceiv_events
{
39 USB_EVENT_NONE
, /* no events or cable disconnected */
40 USB_EVENT_VBUS
, /* vbus valid event */
41 USB_EVENT_ID
, /* id was grounded */
42 USB_EVENT_CHARGER
, /* usb dedicated charger */
43 USB_EVENT_ENUMERATED
, /* gadget driver enumerated */
46 #define USB_OTG_PULLUP_ID (1 << 0)
47 #define USB_OTG_PULLDOWN_DP (1 << 1)
48 #define USB_OTG_PULLDOWN_DM (1 << 2)
49 #define USB_OTG_EXT_VBUS_INDICATOR (1 << 3)
50 #define USB_OTG_DRV_VBUS (1 << 4)
51 #define USB_OTG_DRV_VBUS_EXT (1 << 5)
53 struct otg_transceiver
;
55 /* for transceivers connected thru an ULPI interface, the user must
58 struct otg_io_access_ops
{
59 int (*read
)(struct otg_transceiver
*otg
, u32 reg
);
60 int (*write
)(struct otg_transceiver
*otg
, u32 val
, u32 reg
);
64 * the otg driver needs to interact with both device side and host side
65 * usb controllers. it decides which controller is active at a given
66 * moment, using the transceiver, ID signal, HNP and sometimes static
67 * configuration information (including "board isn't wired for otg").
69 struct otg_transceiver
{
75 enum usb_otg_state state
;
78 struct usb_gadget
*gadget
;
80 struct otg_io_access_ops
*io_ops
;
81 void __iomem
*io_priv
;
83 /* for notification of usb_xceiv_events */
84 struct blocking_notifier_head notifier
;
86 /* to pass extra port status to the root hub */
90 /* initialize/shutdown the OTG controller */
91 int (*init
)(struct otg_transceiver
*otg
);
92 void (*shutdown
)(struct otg_transceiver
*otg
);
94 /* bind/unbind the host controller */
95 int (*set_host
)(struct otg_transceiver
*otg
,
96 struct usb_bus
*host
);
98 /* bind/unbind the peripheral controller */
99 int (*set_peripheral
)(struct otg_transceiver
*otg
,
100 struct usb_gadget
*gadget
);
102 /* effective for B devices, ignored for A-peripheral */
103 int (*set_power
)(struct otg_transceiver
*otg
,
106 /* effective for A-peripheral, ignored for B devices */
107 int (*set_vbus
)(struct otg_transceiver
*otg
,
110 /* for non-OTG B devices: set transceiver into suspend mode */
111 int (*set_suspend
)(struct otg_transceiver
*otg
,
114 /* for B devices only: start session with A-Host */
115 int (*start_srp
)(struct otg_transceiver
*otg
);
117 /* start or continue HNP role switch */
118 int (*start_hnp
)(struct otg_transceiver
*otg
);
123 /* for board-specific init logic */
124 extern int otg_set_transceiver(struct otg_transceiver
*);
126 #if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE)
127 /* sometimes transceivers are accessed only through e.g. ULPI */
128 extern void usb_nop_xceiv_register(void);
129 extern void usb_nop_xceiv_unregister(void);
131 static inline void usb_nop_xceiv_register(void)
135 static inline void usb_nop_xceiv_unregister(void)
140 /* helpers for direct access thru low-level io interface */
141 static inline int otg_io_read(struct otg_transceiver
*otg
, u32 reg
)
143 if (otg
->io_ops
&& otg
->io_ops
->read
)
144 return otg
->io_ops
->read(otg
, reg
);
149 static inline int otg_io_write(struct otg_transceiver
*otg
, u32 reg
, u32 val
)
151 if (otg
->io_ops
&& otg
->io_ops
->write
)
152 return otg
->io_ops
->write(otg
, reg
, val
);
158 otg_init(struct otg_transceiver
*otg
)
161 return otg
->init(otg
);
167 otg_shutdown(struct otg_transceiver
*otg
)
173 /* for usb host and peripheral controller drivers */
174 extern struct otg_transceiver
*otg_get_transceiver(void);
175 extern void otg_put_transceiver(struct otg_transceiver
*);
177 /* Context: can sleep */
179 otg_start_hnp(struct otg_transceiver
*otg
)
181 return otg
->start_hnp(otg
);
184 /* Context: can sleep */
186 otg_set_vbus(struct otg_transceiver
*otg
, bool enabled
)
188 return otg
->set_vbus(otg
, enabled
);
193 otg_set_host(struct otg_transceiver
*otg
, struct usb_bus
*host
)
195 return otg
->set_host(otg
, host
);
198 /* for usb peripheral controller drivers */
200 /* Context: can sleep */
202 otg_set_peripheral(struct otg_transceiver
*otg
, struct usb_gadget
*periph
)
204 return otg
->set_peripheral(otg
, periph
);
208 otg_set_power(struct otg_transceiver
*otg
, unsigned mA
)
210 return otg
->set_power(otg
, mA
);
213 /* Context: can sleep */
215 otg_set_suspend(struct otg_transceiver
*otg
, int suspend
)
217 if (otg
->set_suspend
!= NULL
)
218 return otg
->set_suspend(otg
, suspend
);
224 otg_start_srp(struct otg_transceiver
*otg
)
226 return otg
->start_srp(otg
);
231 otg_register_notifier(struct otg_transceiver
*otg
, struct notifier_block
*nb
)
233 return blocking_notifier_chain_register(&otg
->notifier
, nb
);
237 otg_unregister_notifier(struct otg_transceiver
*otg
, struct notifier_block
*nb
)
239 blocking_notifier_chain_unregister(&otg
->notifier
, nb
);
242 /* for OTG controller drivers (and maybe other stuff) */
243 extern int usb_bus_start_enum(struct usb_bus
*bus
, unsigned port_num
);
245 #endif /* __LINUX_USB_OTG_H */