include/linux/usb/ulpi.h

   1 /*
   2  * ulpi.h -- ULPI defines and function prorotypes
   3  *
   4  * Copyright (C) 2010 Nokia Corporation
   5  *
   6  * This software is distributed under the terms of the GNU General
   7  * Public License ("GPL") as published by the Free Software Foundation,
   8  * version 2 of that License.
   9  */
  10
  11 #ifndef __LINUX_USB_ULPI_H
  12 #define __LINUX_USB_ULPI_H
  13
  14 /*-------------------------------------------------------------------------*/
  15
  16 /*
  17  * Macros for Set and Clear
  18  * See ULPI 1.1 specification to find the registers with Set and Clear offsets
  19  */
  20 #define ULPI_SET(a)                             (a + 1)
  21 #define ULPI_CLR(a)                             (a + 2)
  22
  23 /*-------------------------------------------------------------------------*/
  24
  25 /*
  26  * Register Map
  27  */
  28 #define ULPI_VENDOR_ID_LOW                      0x00
  29 #define ULPI_VENDOR_ID_HIGH                     0x01
  30 #define ULPI_PRODUCT_ID_LOW                     0x02
  31 #define ULPI_PRODUCT_ID_HIGH                    0x03
  32 #define ULPI_FUNC_CTRL                          0x04
  33 #define ULPI_IFC_CTRL                           0x07
  34 #define ULPI_OTG_CTRL                           0x0a
  35 #define ULPI_USB_INT_EN_RISE                    0x0d
  36 #define ULPI_USB_INT_EN_FALL                    0x10
  37 #define ULPI_USB_INT_STS                        0x13
  38 #define ULPI_USB_INT_LATCH                      0x14
  39 #define ULPI_DEBUG                              0x15
  40 #define ULPI_SCRATCH                            0x16
  41 /* Optional Carkit Registers */
  42 #define ULPI_CARCIT_CTRL                        0x19
  43 #define ULPI_CARCIT_INT_DELAY                   0x1c
  44 #define ULPI_CARCIT_INT_EN                      0x1d
  45 #define ULPI_CARCIT_INT_STS                     0x20
  46 #define ULPI_CARCIT_INT_LATCH                   0x21
  47 #define ULPI_CARCIT_PLS_CTRL                    0x22
  48 /* Other Optional Registers */
  49 #define ULPI_TX_POS_WIDTH                       0x25
  50 #define ULPI_TX_NEG_WIDTH                       0x26
  51 #define ULPI_POLARITY_RECOVERY                  0x27
  52 /* Access Extended Register Set */
  53 #define ULPI_ACCESS_EXTENDED                    0x2f
  54 /* Vendor Specific */
  55 #define ULPI_VENDOR_SPECIFIC                    0x30
  56 /* Extended Registers */
  57 #define ULPI_EXT_VENDOR_SPECIFIC                0x80
  58
  59 /*-------------------------------------------------------------------------*/
  60
  61 /* Function Control */
  62 #define ULPI_FUNC_CTRL_XCVRSEL                  (1 << 0)
  63 #define  ULPI_FUNC_CTRL_XCVRSEL_MASK            (3 << 0)
  64 #define  ULPI_FUNC_CTRL_HIGH_SPEED              (0 << 0)
  65 #define  ULPI_FUNC_CTRL_FULL_SPEED              (1 << 0)
  66 #define  ULPI_FUNC_CTRL_LOW_SPEED               (2 << 0)
  67 #define  ULPI_FUNC_CTRL_FS4LS                   (3 << 0)
  68 #define ULPI_FUNC_CTRL_TERMSELECT               (1 << 2)
  69 #define ULPI_FUNC_CTRL_OPMODE                   (1 << 3)
  70 #define  ULPI_FUNC_CTRL_OPMODE_MASK             (3 << 3)
  71 #define  ULPI_FUNC_CTRL_OPMODE_NORMAL           (0 << 3)
  72 #define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING       (1 << 3)
  73 #define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI     (2 << 3)
  74 #define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP     (3 << 3)
  75 #define ULPI_FUNC_CTRL_RESET                    (1 << 5)
  76 #define ULPI_FUNC_CTRL_SUSPENDM                 (1 << 6)
  77
  78 /* Interface Control */
  79 #define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE         (1 << 0)
  80 #define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE         (1 << 1)
  81 #define ULPI_IFC_CTRL_CARKITMODE                (1 << 2)
  82 #define ULPI_IFC_CTRL_CLOCKSUSPENDM             (1 << 3)
  83 #define ULPI_IFC_CTRL_AUTORESUME                (1 << 4)
  84 #define ULPI_IFC_CTRL_EXTERNAL_VBUS             (1 << 5)
  85 #define ULPI_IFC_CTRL_PASSTHRU                  (1 << 6)
  86 #define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE       (1 << 7)
  87
  88 /* OTG Control */
  89 #define ULPI_OTG_CTRL_ID_PULLUP                 (1 << 0)
  90 #define ULPI_OTG_CTRL_DP_PULLDOWN               (1 << 1)
  91 #define ULPI_OTG_CTRL_DM_PULLDOWN               (1 << 2)
  92 #define ULPI_OTG_CTRL_DISCHRGVBUS               (1 << 3)
  93 #define ULPI_OTG_CTRL_CHRGVBUS                  (1 << 4)
  94 #define ULPI_OTG_CTRL_DRVVBUS                   (1 << 5)
  95 #define ULPI_OTG_CTRL_DRVVBUS_EXT               (1 << 6)
  96 #define ULPI_OTG_CTRL_EXTVBUSIND                (1 << 7)
  97
  98 /* USB Interrupt Enable Rising,
  99  * USB Interrupt Enable Falling,
 100  * USB Interrupt Status and
 101  * USB Interrupt Latch
 102  */
 103 #define ULPI_INT_HOST_DISCONNECT                (1 << 0)
 104 #define ULPI_INT_VBUS_VALID                     (1 << 1)
 105 #define ULPI_INT_SESS_VALID                     (1 << 2)
 106 #define ULPI_INT_SESS_END                       (1 << 3)
 107 #define ULPI_INT_IDGRD                          (1 << 4)
 108
 109 /* Debug */
 110 #define ULPI_DEBUG_LINESTATE0                   (1 << 0)
 111 #define ULPI_DEBUG_LINESTATE1                   (1 << 1)
 112
 113 /* Carkit Control */
 114 #define ULPI_CARKIT_CTRL_CARKITPWR              (1 << 0)
 115 #define ULPI_CARKIT_CTRL_IDGNDDRV               (1 << 1)
 116 #define ULPI_CARKIT_CTRL_TXDEN                  (1 << 2)
 117 #define ULPI_CARKIT_CTRL_RXDEN                  (1 << 3)
 118 #define ULPI_CARKIT_CTRL_SPKLEFTEN              (1 << 4)
 119 #define ULPI_CARKIT_CTRL_SPKRIGHTEN             (1 << 5)
 120 #define ULPI_CARKIT_CTRL_MICEN                  (1 << 6)
 121
 122 /* Carkit Interrupt Enable */
 123 #define ULPI_CARKIT_INT_EN_IDFLOAT_RISE         (1 << 0)
 124 #define ULPI_CARKIT_INT_EN_IDFLOAT_FALL         (1 << 1)
 125 #define ULPI_CARKIT_INT_EN_CARINTDET            (1 << 2)
 126 #define ULPI_CARKIT_INT_EN_DP_RISE              (1 << 3)
 127 #define ULPI_CARKIT_INT_EN_DP_FALL              (1 << 4)
 128
 129 /* Carkit Interrupt Status and
 130  * Carkit Interrupt Latch
 131  */
 132 #define ULPI_CARKIT_INT_IDFLOAT                 (1 << 0)
 133 #define ULPI_CARKIT_INT_CARINTDET               (1 << 1)
 134 #define ULPI_CARKIT_INT_DP                      (1 << 2)
 135
 136 /* Carkit Pulse Control*/
 137 #define ULPI_CARKIT_PLS_CTRL_TXPLSEN            (1 << 0)
 138 #define ULPI_CARKIT_PLS_CTRL_RXPLSEN            (1 << 1)
 139 #define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN    (1 << 2)
 140 #define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN   (1 << 3)
 141
 142 /*-------------------------------------------------------------------------*/
 143
 144 struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
 145                                         unsigned int flags);
 146
 147 #endif /* __LINUX_USB_ULPI_H */