2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/pm_qos_params.h>
21 #include <linux/crc32.h>
22 #include <linux/slab.h>
23 #include <net/mac80211.h>
24 #include <asm/unaligned.h>
26 #include "ieee80211_i.h"
27 #include "driver-ops.h"
31 #define IEEE80211_MAX_PROBE_TRIES 5
34 * beacon loss detection timeout
35 * XXX: should depend on beacon interval
37 #define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
39 * Time the connection can be idle before we probe
40 * it to see if we can still talk to the AP.
42 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
44 * Time we wait for a probe response after sending
45 * a probe request because of beacon loss or for
46 * checking the connection still works.
48 #define IEEE80211_PROBE_WAIT (HZ / 2)
51 * Weight given to the latest Beacon frame when calculating average signal
52 * strength for Beacon frames received in the current BSS. This must be
55 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
57 #define TMR_RUNNING_TIMER 0
58 #define TMR_RUNNING_CHANSW 1
61 * All cfg80211 functions have to be called outside a locked
62 * section so that they can acquire a lock themselves... This
63 * is much simpler than queuing up things in cfg80211, but we
64 * do need some indirection for that here.
67 /* no action required */
70 /* caller must call cfg80211_send_rx_auth() */
71 RX_MGMT_CFG80211_AUTH
,
73 /* caller must call cfg80211_send_rx_assoc() */
74 RX_MGMT_CFG80211_ASSOC
,
76 /* caller must call cfg80211_send_deauth() */
77 RX_MGMT_CFG80211_DEAUTH
,
79 /* caller must call cfg80211_send_disassoc() */
80 RX_MGMT_CFG80211_DISASSOC
,
82 /* caller must tell cfg80211 about internal error */
83 RX_MGMT_CFG80211_ASSOC_ERROR
,
87 static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed
*ifmgd
)
89 WARN_ON(!mutex_is_locked(&ifmgd
->mtx
));
93 * We can have multiple work items (and connection probing)
94 * scheduling this timer, but we need to take care to only
95 * reschedule it when it should fire _earlier_ than it was
96 * asked for before, or if it's not pending right now. This
97 * function ensures that. Note that it then is required to
98 * run this function for all timeouts after the first one
99 * has happened -- the work that runs from this timer will
102 static void run_again(struct ieee80211_if_managed
*ifmgd
,
103 unsigned long timeout
)
105 ASSERT_MGD_MTX(ifmgd
);
107 if (!timer_pending(&ifmgd
->timer
) ||
108 time_before(timeout
, ifmgd
->timer
.expires
))
109 mod_timer(&ifmgd
->timer
, timeout
);
112 static void mod_beacon_timer(struct ieee80211_sub_if_data
*sdata
)
114 if (sdata
->local
->hw
.flags
& IEEE80211_HW_BEACON_FILTER
)
117 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
118 round_jiffies_up(jiffies
+ IEEE80211_BEACON_LOSS_TIME
));
121 static int ecw2cw(int ecw
)
123 return (1 << ecw
) - 1;
127 * ieee80211_enable_ht should be called only after the operating band
128 * has been determined as ht configuration depends on the hw's
129 * HT abilities for a specific band.
131 static u32
ieee80211_enable_ht(struct ieee80211_sub_if_data
*sdata
,
132 struct ieee80211_ht_info
*hti
,
133 const u8
*bssid
, u16 ap_ht_cap_flags
)
135 struct ieee80211_local
*local
= sdata
->local
;
136 struct ieee80211_supported_band
*sband
;
137 struct sta_info
*sta
;
140 bool enable_ht
= true;
141 enum nl80211_channel_type prev_chantype
;
142 enum nl80211_channel_type channel_type
= NL80211_CHAN_NO_HT
;
144 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
146 prev_chantype
= sdata
->vif
.bss_conf
.channel_type
;
148 /* HT is not supported */
149 if (!sband
->ht_cap
.ht_supported
)
152 /* check that channel matches the right operating channel */
153 if (local
->hw
.conf
.channel
->center_freq
!=
154 ieee80211_channel_to_frequency(hti
->control_chan
))
158 channel_type
= NL80211_CHAN_HT20
;
160 if (!(ap_ht_cap_flags
& IEEE80211_HT_CAP_40MHZ_INTOLERANT
) &&
161 (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) &&
162 (hti
->ht_param
& IEEE80211_HT_PARAM_CHAN_WIDTH_ANY
)) {
163 switch(hti
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
164 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
165 if (!(local
->hw
.conf
.channel
->flags
&
166 IEEE80211_CHAN_NO_HT40PLUS
))
167 channel_type
= NL80211_CHAN_HT40PLUS
;
169 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
170 if (!(local
->hw
.conf
.channel
->flags
&
171 IEEE80211_CHAN_NO_HT40MINUS
))
172 channel_type
= NL80211_CHAN_HT40MINUS
;
178 if (local
->tmp_channel
)
179 local
->tmp_channel_type
= channel_type
;
181 if (!ieee80211_set_channel_type(local
, sdata
, channel_type
)) {
182 /* can only fail due to HT40+/- mismatch */
183 channel_type
= NL80211_CHAN_HT20
;
184 WARN_ON(!ieee80211_set_channel_type(local
, sdata
, channel_type
));
187 /* channel_type change automatically detected */
188 ieee80211_hw_config(local
, 0);
190 if (prev_chantype
!= channel_type
) {
192 sta
= sta_info_get(sdata
, bssid
);
194 rate_control_rate_update(local
, sband
, sta
,
195 IEEE80211_RC_HT_CHANGED
,
200 ht_opmode
= le16_to_cpu(hti
->operation_mode
);
202 /* if bss configuration changed store the new one */
203 if (sdata
->ht_opmode_valid
!= enable_ht
||
204 sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
||
205 prev_chantype
!= channel_type
) {
206 changed
|= BSS_CHANGED_HT
;
207 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
208 sdata
->ht_opmode_valid
= enable_ht
;
214 /* frame sending functions */
216 static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data
*sdata
,
217 const u8
*bssid
, u16 stype
, u16 reason
,
218 void *cookie
, bool send_frame
)
220 struct ieee80211_local
*local
= sdata
->local
;
221 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
223 struct ieee80211_mgmt
*mgmt
;
225 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*mgmt
));
227 printk(KERN_DEBUG
"%s: failed to allocate buffer for "
228 "deauth/disassoc frame\n", sdata
->name
);
231 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
233 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
235 memcpy(mgmt
->da
, bssid
, ETH_ALEN
);
236 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
237 memcpy(mgmt
->bssid
, bssid
, ETH_ALEN
);
238 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
| stype
);
240 /* u.deauth.reason_code == u.disassoc.reason_code */
241 mgmt
->u
.deauth
.reason_code
= cpu_to_le16(reason
);
243 if (stype
== IEEE80211_STYPE_DEAUTH
)
245 __cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
247 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
250 __cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
252 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
253 if (!(ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
))
254 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
257 ieee80211_tx_skb(sdata
, skb
);
262 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
263 struct ieee80211_sub_if_data
*sdata
)
265 struct ieee80211_pspoll
*pspoll
;
268 skb
= ieee80211_pspoll_get(&local
->hw
, &sdata
->vif
);
272 pspoll
= (struct ieee80211_pspoll
*) skb
->data
;
273 pspoll
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
275 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
276 ieee80211_tx_skb(sdata
, skb
);
279 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
280 struct ieee80211_sub_if_data
*sdata
,
284 struct ieee80211_hdr_3addr
*nullfunc
;
286 skb
= ieee80211_nullfunc_get(&local
->hw
, &sdata
->vif
);
290 nullfunc
= (struct ieee80211_hdr_3addr
*) skb
->data
;
292 nullfunc
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
294 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
295 ieee80211_tx_skb(sdata
, skb
);
298 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local
*local
,
299 struct ieee80211_sub_if_data
*sdata
)
302 struct ieee80211_hdr
*nullfunc
;
305 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
308 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 30);
310 printk(KERN_DEBUG
"%s: failed to allocate buffer for 4addr "
311 "nullfunc frame\n", sdata
->name
);
314 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
316 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 30);
317 memset(nullfunc
, 0, 30);
318 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
319 IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
320 nullfunc
->frame_control
= fc
;
321 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
322 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
323 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
324 memcpy(nullfunc
->addr4
, sdata
->vif
.addr
, ETH_ALEN
);
326 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
327 ieee80211_tx_skb(sdata
, skb
);
330 /* spectrum management related things */
331 static void ieee80211_chswitch_work(struct work_struct
*work
)
333 struct ieee80211_sub_if_data
*sdata
=
334 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
335 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
337 if (!ieee80211_sdata_running(sdata
))
340 mutex_lock(&ifmgd
->mtx
);
341 if (!ifmgd
->associated
)
344 sdata
->local
->oper_channel
= sdata
->local
->csa_channel
;
345 if (!sdata
->local
->ops
->channel_switch
) {
346 /* call "hw_config" only if doing sw channel switch */
347 ieee80211_hw_config(sdata
->local
,
348 IEEE80211_CONF_CHANGE_CHANNEL
);
351 /* XXX: shouldn't really modify cfg80211-owned data! */
352 ifmgd
->associated
->channel
= sdata
->local
->oper_channel
;
354 ieee80211_wake_queues_by_reason(&sdata
->local
->hw
,
355 IEEE80211_QUEUE_STOP_REASON_CSA
);
357 ifmgd
->flags
&= ~IEEE80211_STA_CSA_RECEIVED
;
358 mutex_unlock(&ifmgd
->mtx
);
361 void ieee80211_chswitch_done(struct ieee80211_vif
*vif
, bool success
)
363 struct ieee80211_sub_if_data
*sdata
;
364 struct ieee80211_if_managed
*ifmgd
;
366 sdata
= vif_to_sdata(vif
);
367 ifmgd
= &sdata
->u
.mgd
;
369 trace_api_chswitch_done(sdata
, success
);
372 * If the channel switch was not successful, stay
373 * around on the old channel. We currently lack
374 * good handling of this situation, possibly we
375 * should just drop the association.
377 sdata
->local
->csa_channel
= sdata
->local
->oper_channel
;
380 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
382 EXPORT_SYMBOL(ieee80211_chswitch_done
);
384 static void ieee80211_chswitch_timer(unsigned long data
)
386 struct ieee80211_sub_if_data
*sdata
=
387 (struct ieee80211_sub_if_data
*) data
;
388 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
390 if (sdata
->local
->quiescing
) {
391 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
395 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
398 void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
399 struct ieee80211_channel_sw_ie
*sw_elem
,
400 struct ieee80211_bss
*bss
,
403 struct cfg80211_bss
*cbss
=
404 container_of((void *)bss
, struct cfg80211_bss
, priv
);
405 struct ieee80211_channel
*new_ch
;
406 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
407 int new_freq
= ieee80211_channel_to_frequency(sw_elem
->new_ch_num
);
409 ASSERT_MGD_MTX(ifmgd
);
411 if (!ifmgd
->associated
)
414 if (sdata
->local
->scanning
)
417 /* Disregard subsequent beacons if we are already running a timer
420 if (ifmgd
->flags
& IEEE80211_STA_CSA_RECEIVED
)
423 new_ch
= ieee80211_get_channel(sdata
->local
->hw
.wiphy
, new_freq
);
424 if (!new_ch
|| new_ch
->flags
& IEEE80211_CHAN_DISABLED
)
427 sdata
->local
->csa_channel
= new_ch
;
429 if (sdata
->local
->ops
->channel_switch
) {
430 /* use driver's channel switch callback */
431 struct ieee80211_channel_switch ch_switch
;
432 memset(&ch_switch
, 0, sizeof(ch_switch
));
433 ch_switch
.timestamp
= timestamp
;
435 ch_switch
.block_tx
= true;
436 ieee80211_stop_queues_by_reason(&sdata
->local
->hw
,
437 IEEE80211_QUEUE_STOP_REASON_CSA
);
439 ch_switch
.channel
= new_ch
;
440 ch_switch
.count
= sw_elem
->count
;
441 ifmgd
->flags
|= IEEE80211_STA_CSA_RECEIVED
;
442 drv_channel_switch(sdata
->local
, &ch_switch
);
446 /* channel switch handled in software */
447 if (sw_elem
->count
<= 1) {
448 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
451 ieee80211_stop_queues_by_reason(&sdata
->local
->hw
,
452 IEEE80211_QUEUE_STOP_REASON_CSA
);
453 ifmgd
->flags
|= IEEE80211_STA_CSA_RECEIVED
;
454 mod_timer(&ifmgd
->chswitch_timer
,
456 msecs_to_jiffies(sw_elem
->count
*
457 cbss
->beacon_interval
));
461 static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
462 u16 capab_info
, u8
*pwr_constr_elem
,
463 u8 pwr_constr_elem_len
)
465 struct ieee80211_conf
*conf
= &sdata
->local
->hw
.conf
;
467 if (!(capab_info
& WLAN_CAPABILITY_SPECTRUM_MGMT
))
470 /* Power constraint IE length should be 1 octet */
471 if (pwr_constr_elem_len
!= 1)
474 if ((*pwr_constr_elem
<= conf
->channel
->max_power
) &&
475 (*pwr_constr_elem
!= sdata
->local
->power_constr_level
)) {
476 sdata
->local
->power_constr_level
= *pwr_constr_elem
;
477 ieee80211_hw_config(sdata
->local
, 0);
482 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
483 struct ieee80211_sub_if_data
*sdata
)
485 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
488 * If we are scanning right now then the parameters will
489 * take effect when scan finishes.
494 if (conf
->dynamic_ps_timeout
> 0 &&
495 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
496 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
497 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
499 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
500 ieee80211_send_nullfunc(local
, sdata
, 1);
502 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
503 (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
))
506 conf
->flags
|= IEEE80211_CONF_PS
;
507 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
511 static void ieee80211_change_ps(struct ieee80211_local
*local
)
513 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
515 if (local
->ps_sdata
) {
516 ieee80211_enable_ps(local
, local
->ps_sdata
);
517 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
518 conf
->flags
&= ~IEEE80211_CONF_PS
;
519 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
520 del_timer_sync(&local
->dynamic_ps_timer
);
521 cancel_work_sync(&local
->dynamic_ps_enable_work
);
525 /* need to hold RTNL or interface lock */
526 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
528 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
532 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
533 local
->ps_sdata
= NULL
;
537 if (!list_empty(&local
->work_list
)) {
538 local
->ps_sdata
= NULL
;
542 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
543 if (!ieee80211_sdata_running(sdata
))
545 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
551 if (count
== 1 && found
->u
.mgd
.powersave
&&
552 found
->u
.mgd
.associated
&&
553 found
->u
.mgd
.associated
->beacon_ies
&&
554 !(found
->u
.mgd
.flags
& (IEEE80211_STA_BEACON_POLL
|
555 IEEE80211_STA_CONNECTION_POLL
))) {
559 latency
= pm_qos_request(PM_QOS_NETWORK_LATENCY
);
561 beaconint_us
= ieee80211_tu_to_usec(
562 found
->vif
.bss_conf
.beacon_int
);
564 timeout
= local
->hw
.conf
.dynamic_ps_forced_timeout
;
567 * The 2 second value is there for compatibility until
568 * the PM_QOS_NETWORK_LATENCY is configured with real
571 if (latency
== 2000000000)
573 else if (latency
<= 50000)
575 else if (latency
<= 100000)
577 else if (latency
<= 500000)
582 local
->hw
.conf
.dynamic_ps_timeout
= timeout
;
584 if (beaconint_us
> latency
) {
585 local
->ps_sdata
= NULL
;
587 struct ieee80211_bss
*bss
;
591 bss
= (void *)found
->u
.mgd
.associated
->priv
;
592 dtimper
= bss
->dtim_period
;
594 /* If the TIM IE is invalid, pretend the value is 1 */
597 else if (dtimper
> 1)
598 maxslp
= min_t(int, dtimper
,
599 latency
/ beaconint_us
);
601 local
->hw
.conf
.max_sleep_period
= maxslp
;
602 local
->hw
.conf
.ps_dtim_period
= dtimper
;
603 local
->ps_sdata
= found
;
606 local
->ps_sdata
= NULL
;
610 ieee80211_change_ps(local
);
613 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
615 struct ieee80211_local
*local
=
616 container_of(work
, struct ieee80211_local
,
617 dynamic_ps_disable_work
);
619 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
620 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
621 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
624 ieee80211_wake_queues_by_reason(&local
->hw
,
625 IEEE80211_QUEUE_STOP_REASON_PS
);
628 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
630 struct ieee80211_local
*local
=
631 container_of(work
, struct ieee80211_local
,
632 dynamic_ps_enable_work
);
633 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
634 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
636 /* can only happen when PS was just disabled anyway */
640 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
643 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
644 (!(ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)))
645 ieee80211_send_nullfunc(local
, sdata
, 1);
647 if (!((local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) &&
648 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)) ||
649 (ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
650 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
651 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
652 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
656 void ieee80211_dynamic_ps_timer(unsigned long data
)
658 struct ieee80211_local
*local
= (void *) data
;
660 if (local
->quiescing
|| local
->suspended
)
663 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
667 static void ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
668 struct ieee80211_if_managed
*ifmgd
,
669 u8
*wmm_param
, size_t wmm_param_len
)
671 struct ieee80211_tx_queue_params params
;
674 u8
*pos
, uapsd_queues
= 0;
676 if (!local
->ops
->conf_tx
)
679 if (local
->hw
.queues
< 4)
685 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
688 if (ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
)
689 uapsd_queues
= local
->uapsd_queues
;
691 count
= wmm_param
[6] & 0x0f;
692 if (count
== ifmgd
->wmm_last_param_set
)
694 ifmgd
->wmm_last_param_set
= count
;
697 left
= wmm_param_len
- 8;
699 memset(¶ms
, 0, sizeof(params
));
702 for (; left
>= 4; left
-= 4, pos
+= 4) {
703 int aci
= (pos
[0] >> 5) & 0x03;
704 int acm
= (pos
[0] >> 4) & 0x01;
712 local
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
713 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
719 local
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
720 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
726 local
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
727 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
734 local
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
735 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
740 params
.aifs
= pos
[0] & 0x0f;
741 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
742 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
743 params
.txop
= get_unaligned_le16(pos
+ 2);
744 params
.uapsd
= uapsd
;
746 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
747 printk(KERN_DEBUG
"%s: WMM queue=%d aci=%d acm=%d aifs=%d "
748 "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
749 wiphy_name(local
->hw
.wiphy
), queue
, aci
, acm
,
750 params
.aifs
, params
.cw_min
, params
.cw_max
, params
.txop
,
753 if (drv_conf_tx(local
, queue
, ¶ms
))
754 printk(KERN_DEBUG
"%s: failed to set TX queue "
755 "parameters for queue %d\n",
756 wiphy_name(local
->hw
.wiphy
), queue
);
759 /* enable WMM or activate new settings */
760 local
->hw
.conf
.flags
|= IEEE80211_CONF_QOS
;
761 drv_config(local
, IEEE80211_CONF_CHANGE_QOS
);
764 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
765 u16 capab
, bool erp_valid
, u8 erp
)
767 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
770 bool use_short_preamble
;
774 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
775 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
777 use_protection
= false;
778 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
781 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
782 if (sdata
->local
->hw
.conf
.channel
->band
== IEEE80211_BAND_5GHZ
)
783 use_short_slot
= true;
785 if (use_protection
!= bss_conf
->use_cts_prot
) {
786 bss_conf
->use_cts_prot
= use_protection
;
787 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
790 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
791 bss_conf
->use_short_preamble
= use_short_preamble
;
792 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
795 if (use_short_slot
!= bss_conf
->use_short_slot
) {
796 bss_conf
->use_short_slot
= use_short_slot
;
797 changed
|= BSS_CHANGED_ERP_SLOT
;
803 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
804 struct cfg80211_bss
*cbss
,
805 u32 bss_info_changed
)
807 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
808 struct ieee80211_local
*local
= sdata
->local
;
810 bss_info_changed
|= BSS_CHANGED_ASSOC
;
811 /* set timing information */
812 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
813 sdata
->vif
.bss_conf
.timestamp
= cbss
->tsf
;
815 bss_info_changed
|= BSS_CHANGED_BEACON_INT
;
816 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
817 cbss
->capability
, bss
->has_erp_value
, bss
->erp_value
);
819 sdata
->u
.mgd
.associated
= cbss
;
820 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
822 sdata
->u
.mgd
.flags
|= IEEE80211_STA_RESET_SIGNAL_AVE
;
824 /* just to be sure */
825 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
826 IEEE80211_STA_BEACON_POLL
);
829 * Always handle WMM once after association regardless
830 * of the first value the AP uses. Setting -1 here has
831 * that effect because the AP values is an unsigned
834 sdata
->u
.mgd
.wmm_last_param_set
= -1;
836 ieee80211_led_assoc(local
, 1);
838 sdata
->vif
.bss_conf
.assoc
= 1;
840 * For now just always ask the driver to update the basic rateset
841 * when we have associated, we aren't checking whether it actually
844 bss_info_changed
|= BSS_CHANGED_BASIC_RATES
;
846 /* And the BSSID changed - we're associated now */
847 bss_info_changed
|= BSS_CHANGED_BSSID
;
849 /* Tell the driver to monitor connection quality (if supported) */
850 if ((local
->hw
.flags
& IEEE80211_HW_SUPPORTS_CQM_RSSI
) &&
851 sdata
->vif
.bss_conf
.cqm_rssi_thold
)
852 bss_info_changed
|= BSS_CHANGED_CQM
;
854 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
856 mutex_lock(&local
->iflist_mtx
);
857 ieee80211_recalc_ps(local
, -1);
858 ieee80211_recalc_smps(local
, sdata
);
859 mutex_unlock(&local
->iflist_mtx
);
861 netif_tx_start_all_queues(sdata
->dev
);
862 netif_carrier_on(sdata
->dev
);
865 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
,
868 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
869 struct ieee80211_local
*local
= sdata
->local
;
870 struct sta_info
*sta
;
871 u32 changed
= 0, config_changed
= 0;
874 ASSERT_MGD_MTX(ifmgd
);
876 if (WARN_ON(!ifmgd
->associated
))
879 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
881 ifmgd
->associated
= NULL
;
882 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
885 * we need to commit the associated = NULL change because the
886 * scan code uses that to determine whether this iface should
887 * go to/wake up from powersave or not -- and could otherwise
888 * wake the queues erroneously.
893 * Thus, we can only afterwards stop the queues -- to account
894 * for the case where another CPU is finishing a scan at this
895 * time -- we don't want the scan code to enable queues.
898 netif_tx_stop_all_queues(sdata
->dev
);
899 netif_carrier_off(sdata
->dev
);
902 sta
= sta_info_get(sdata
, bssid
);
904 set_sta_flags(sta
, WLAN_STA_DISASSOC
);
905 ieee80211_sta_tear_down_BA_sessions(sta
);
909 changed
|= ieee80211_reset_erp_info(sdata
);
911 ieee80211_led_assoc(local
, 0);
912 changed
|= BSS_CHANGED_ASSOC
;
913 sdata
->vif
.bss_conf
.assoc
= false;
915 ieee80211_set_wmm_default(sdata
);
917 /* channel(_type) changes are handled by ieee80211_hw_config */
918 WARN_ON(!ieee80211_set_channel_type(local
, sdata
, NL80211_CHAN_NO_HT
));
920 /* on the next assoc, re-program HT parameters */
921 sdata
->ht_opmode_valid
= false;
923 local
->power_constr_level
= 0;
925 del_timer_sync(&local
->dynamic_ps_timer
);
926 cancel_work_sync(&local
->dynamic_ps_enable_work
);
928 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
929 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
930 config_changed
|= IEEE80211_CONF_CHANGE_PS
;
933 ieee80211_hw_config(local
, config_changed
);
935 /* The BSSID (not really interesting) and HT changed */
936 changed
|= BSS_CHANGED_BSSID
| BSS_CHANGED_HT
;
937 ieee80211_bss_info_change_notify(sdata
, changed
);
940 sta_info_destroy_addr(sdata
, bssid
);
943 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
944 struct ieee80211_hdr
*hdr
)
947 * We can postpone the mgd.timer whenever receiving unicast frames
948 * from AP because we know that the connection is working both ways
949 * at that time. But multicast frames (and hence also beacons) must
950 * be ignored here, because we need to trigger the timer during
951 * data idle periods for sending the periodic probe request to the
952 * AP we're connected to.
954 if (is_multicast_ether_addr(hdr
->addr1
))
957 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
960 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
961 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
964 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
966 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
969 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
970 ieee80211_send_probe_req(sdata
, ifmgd
->associated
->bssid
,
971 ssid
+ 2, ssid
[1], NULL
, 0);
973 ifmgd
->probe_send_count
++;
974 ifmgd
->probe_timeout
= jiffies
+ IEEE80211_PROBE_WAIT
;
975 run_again(ifmgd
, ifmgd
->probe_timeout
);
978 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
981 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
982 bool already
= false;
984 if (!ieee80211_sdata_running(sdata
))
987 if (sdata
->local
->scanning
)
990 if (sdata
->local
->tmp_channel
)
993 mutex_lock(&ifmgd
->mtx
);
995 if (!ifmgd
->associated
)
998 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
999 if (beacon
&& net_ratelimit())
1000 printk(KERN_DEBUG
"%s: detected beacon loss from AP "
1001 "- sending probe request\n", sdata
->name
);
1005 * The driver/our work has already reported this event or the
1006 * connection monitoring has kicked in and we have already sent
1007 * a probe request. Or maybe the AP died and the driver keeps
1008 * reporting until we disassociate...
1010 * In either case we have to ignore the current call to this
1011 * function (except for setting the correct probe reason bit)
1012 * because otherwise we would reset the timer every time and
1013 * never check whether we received a probe response!
1015 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1016 IEEE80211_STA_CONNECTION_POLL
))
1020 ifmgd
->flags
|= IEEE80211_STA_BEACON_POLL
;
1022 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
1027 mutex_lock(&sdata
->local
->iflist_mtx
);
1028 ieee80211_recalc_ps(sdata
->local
, -1);
1029 mutex_unlock(&sdata
->local
->iflist_mtx
);
1031 ifmgd
->probe_send_count
= 0;
1032 ieee80211_mgd_probe_ap_send(sdata
);
1034 mutex_unlock(&ifmgd
->mtx
);
1037 static void __ieee80211_connection_loss(struct ieee80211_sub_if_data
*sdata
)
1039 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1040 struct ieee80211_local
*local
= sdata
->local
;
1043 mutex_lock(&ifmgd
->mtx
);
1044 if (!ifmgd
->associated
) {
1045 mutex_unlock(&ifmgd
->mtx
);
1049 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
1051 printk(KERN_DEBUG
"Connection to AP %pM lost.\n", bssid
);
1053 ieee80211_set_disassoc(sdata
, true);
1054 ieee80211_recalc_idle(local
);
1055 mutex_unlock(&ifmgd
->mtx
);
1057 * must be outside lock due to cfg80211,
1058 * but that's not a problem.
1060 ieee80211_send_deauth_disassoc(sdata
, bssid
,
1061 IEEE80211_STYPE_DEAUTH
,
1062 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
1066 void ieee80211_beacon_connection_loss_work(struct work_struct
*work
)
1068 struct ieee80211_sub_if_data
*sdata
=
1069 container_of(work
, struct ieee80211_sub_if_data
,
1070 u
.mgd
.beacon_connection_loss_work
);
1072 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
1073 __ieee80211_connection_loss(sdata
);
1075 ieee80211_mgd_probe_ap(sdata
, true);
1078 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
1080 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1081 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
1083 trace_api_beacon_loss(sdata
);
1085 WARN_ON(hw
->flags
& IEEE80211_HW_CONNECTION_MONITOR
);
1086 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
1088 EXPORT_SYMBOL(ieee80211_beacon_loss
);
1090 void ieee80211_connection_loss(struct ieee80211_vif
*vif
)
1092 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1093 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
1095 trace_api_connection_loss(sdata
);
1097 WARN_ON(!(hw
->flags
& IEEE80211_HW_CONNECTION_MONITOR
));
1098 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
1100 EXPORT_SYMBOL(ieee80211_connection_loss
);
1103 static enum rx_mgmt_action __must_check
1104 ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
1105 struct ieee80211_mgmt
*mgmt
, size_t len
)
1107 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1108 const u8
*bssid
= NULL
;
1112 return RX_MGMT_NONE
;
1114 ASSERT_MGD_MTX(ifmgd
);
1116 bssid
= ifmgd
->associated
->bssid
;
1118 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
1120 printk(KERN_DEBUG
"%s: deauthenticated from %pM (Reason: %u)\n",
1121 sdata
->name
, bssid
, reason_code
);
1123 ieee80211_set_disassoc(sdata
, true);
1124 ieee80211_recalc_idle(sdata
->local
);
1126 return RX_MGMT_CFG80211_DEAUTH
;
1130 static enum rx_mgmt_action __must_check
1131 ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
1132 struct ieee80211_mgmt
*mgmt
, size_t len
)
1134 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1138 return RX_MGMT_NONE
;
1140 ASSERT_MGD_MTX(ifmgd
);
1142 if (WARN_ON(!ifmgd
->associated
))
1143 return RX_MGMT_NONE
;
1145 if (WARN_ON(memcmp(ifmgd
->associated
->bssid
, mgmt
->sa
, ETH_ALEN
)))
1146 return RX_MGMT_NONE
;
1148 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
1150 printk(KERN_DEBUG
"%s: disassociated from %pM (Reason: %u)\n",
1151 sdata
->name
, mgmt
->sa
, reason_code
);
1153 ieee80211_set_disassoc(sdata
, true);
1154 ieee80211_recalc_idle(sdata
->local
);
1155 return RX_MGMT_CFG80211_DISASSOC
;
1159 static bool ieee80211_assoc_success(struct ieee80211_work
*wk
,
1160 struct ieee80211_mgmt
*mgmt
, size_t len
)
1162 struct ieee80211_sub_if_data
*sdata
= wk
->sdata
;
1163 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1164 struct ieee80211_local
*local
= sdata
->local
;
1165 struct ieee80211_supported_band
*sband
;
1166 struct sta_info
*sta
;
1167 struct cfg80211_bss
*cbss
= wk
->assoc
.bss
;
1169 u32 rates
, basic_rates
;
1170 u16 capab_info
, aid
;
1171 struct ieee802_11_elems elems
;
1172 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1175 bool have_higher_than_11mbit
= false;
1176 u16 ap_ht_cap_flags
;
1178 /* AssocResp and ReassocResp have identical structure */
1180 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
1181 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
1183 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
1184 printk(KERN_DEBUG
"%s: invalid aid value %d; bits 15:14 not "
1185 "set\n", sdata
->name
, aid
);
1186 aid
&= ~(BIT(15) | BIT(14));
1188 pos
= mgmt
->u
.assoc_resp
.variable
;
1189 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), &elems
);
1191 if (!elems
.supp_rates
) {
1192 printk(KERN_DEBUG
"%s: no SuppRates element in AssocResp\n",
1199 sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
1201 printk(KERN_DEBUG
"%s: failed to alloc STA entry for"
1202 " the AP\n", sdata
->name
);
1206 set_sta_flags(sta
, WLAN_STA_AUTH
| WLAN_STA_ASSOC
|
1208 if (!(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
1209 set_sta_flags(sta
, WLAN_STA_AUTHORIZED
);
1213 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1215 for (i
= 0; i
< elems
.supp_rates_len
; i
++) {
1216 int rate
= (elems
.supp_rates
[i
] & 0x7f) * 5;
1217 bool is_basic
= !!(elems
.supp_rates
[i
] & 0x80);
1220 have_higher_than_11mbit
= true;
1222 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1223 if (sband
->bitrates
[j
].bitrate
== rate
) {
1226 basic_rates
|= BIT(j
);
1232 for (i
= 0; i
< elems
.ext_supp_rates_len
; i
++) {
1233 int rate
= (elems
.ext_supp_rates
[i
] & 0x7f) * 5;
1234 bool is_basic
= !!(elems
.ext_supp_rates
[i
] & 0x80);
1237 have_higher_than_11mbit
= true;
1239 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1240 if (sband
->bitrates
[j
].bitrate
== rate
) {
1243 basic_rates
|= BIT(j
);
1249 sta
->sta
.supp_rates
[local
->hw
.conf
.channel
->band
] = rates
;
1250 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
1252 /* cf. IEEE 802.11 9.2.12 */
1253 if (local
->hw
.conf
.channel
->band
== IEEE80211_BAND_2GHZ
&&
1254 have_higher_than_11mbit
)
1255 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
1257 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
1259 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1260 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1261 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1263 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1265 rate_control_rate_init(sta
);
1267 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
1268 set_sta_flags(sta
, WLAN_STA_MFP
);
1270 if (elems
.wmm_param
)
1271 set_sta_flags(sta
, WLAN_STA_WME
);
1273 err
= sta_info_insert(sta
);
1276 printk(KERN_DEBUG
"%s: failed to insert STA entry for"
1277 " the AP (error %d)\n", sdata
->name
, err
);
1281 if (elems
.wmm_param
)
1282 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1283 elems
.wmm_param_len
);
1285 ieee80211_set_wmm_default(sdata
);
1287 local
->oper_channel
= wk
->chan
;
1289 if (elems
.ht_info_elem
&& elems
.wmm_param
&&
1290 (sdata
->local
->hw
.queues
>= 4) &&
1291 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1292 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1293 cbss
->bssid
, ap_ht_cap_flags
);
1295 /* set AID and assoc capability,
1296 * ieee80211_set_associated() will tell the driver */
1297 bss_conf
->aid
= aid
;
1298 bss_conf
->assoc_capability
= capab_info
;
1299 ieee80211_set_associated(sdata
, cbss
, changed
);
1302 * If we're using 4-addr mode, let the AP know that we're
1303 * doing so, so that it can create the STA VLAN on its side
1305 if (ifmgd
->use_4addr
)
1306 ieee80211_send_4addr_nullfunc(local
, sdata
);
1309 * Start timer to probe the connection to the AP now.
1310 * Also start the timer that will detect beacon loss.
1312 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
1313 mod_beacon_timer(sdata
);
1319 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
1320 struct ieee80211_mgmt
*mgmt
,
1322 struct ieee80211_rx_status
*rx_status
,
1323 struct ieee802_11_elems
*elems
,
1326 struct ieee80211_local
*local
= sdata
->local
;
1328 struct ieee80211_bss
*bss
;
1329 struct ieee80211_channel
*channel
;
1330 bool need_ps
= false;
1332 if (sdata
->u
.mgd
.associated
) {
1333 bss
= (void *)sdata
->u
.mgd
.associated
->priv
;
1334 /* not previously set so we may need to recalc */
1335 need_ps
= !bss
->dtim_period
;
1338 if (elems
->ds_params
&& elems
->ds_params_len
== 1)
1339 freq
= ieee80211_channel_to_frequency(elems
->ds_params
[0]);
1341 freq
= rx_status
->freq
;
1343 channel
= ieee80211_get_channel(local
->hw
.wiphy
, freq
);
1345 if (!channel
|| channel
->flags
& IEEE80211_CHAN_DISABLED
)
1348 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
1351 ieee80211_rx_bss_put(local
, bss
);
1353 if (!sdata
->u
.mgd
.associated
)
1357 mutex_lock(&local
->iflist_mtx
);
1358 ieee80211_recalc_ps(local
, -1);
1359 mutex_unlock(&local
->iflist_mtx
);
1362 if (elems
->ch_switch_elem
&& (elems
->ch_switch_elem_len
== 3) &&
1363 (memcmp(mgmt
->bssid
, sdata
->u
.mgd
.associated
->bssid
,
1365 struct ieee80211_channel_sw_ie
*sw_elem
=
1366 (struct ieee80211_channel_sw_ie
*)elems
->ch_switch_elem
;
1367 ieee80211_sta_process_chanswitch(sdata
, sw_elem
,
1368 bss
, rx_status
->mactime
);
1373 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
1374 struct sk_buff
*skb
)
1376 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
1377 struct ieee80211_if_managed
*ifmgd
;
1378 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
1379 size_t baselen
, len
= skb
->len
;
1380 struct ieee802_11_elems elems
;
1382 ifmgd
= &sdata
->u
.mgd
;
1384 ASSERT_MGD_MTX(ifmgd
);
1386 if (memcmp(mgmt
->da
, sdata
->vif
.addr
, ETH_ALEN
))
1387 return; /* ignore ProbeResp to foreign address */
1389 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
1393 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
1396 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
, false);
1398 if (ifmgd
->associated
&&
1399 memcmp(mgmt
->bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
) == 0 &&
1400 ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1401 IEEE80211_STA_CONNECTION_POLL
)) {
1402 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1403 IEEE80211_STA_BEACON_POLL
);
1404 mutex_lock(&sdata
->local
->iflist_mtx
);
1405 ieee80211_recalc_ps(sdata
->local
, -1);
1406 mutex_unlock(&sdata
->local
->iflist_mtx
);
1408 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
1412 * We've received a probe response, but are not sure whether
1413 * we have or will be receiving any beacons or data, so let's
1414 * schedule the timers again, just in case.
1416 mod_beacon_timer(sdata
);
1418 mod_timer(&ifmgd
->conn_mon_timer
,
1419 round_jiffies_up(jiffies
+
1420 IEEE80211_CONNECTION_IDLE_TIME
));
1425 * This is the canonical list of information elements we care about,
1426 * the filter code also gives us all changes to the Microsoft OUI
1427 * (00:50:F2) vendor IE which is used for WMM which we need to track.
1429 * We implement beacon filtering in software since that means we can
1430 * avoid processing the frame here and in cfg80211, and userspace
1431 * will not be able to tell whether the hardware supports it or not.
1433 * XXX: This list needs to be dynamic -- userspace needs to be able to
1434 * add items it requires. It also needs to be able to tell us to
1435 * look out for other vendor IEs.
1437 static const u64 care_about_ies
=
1438 (1ULL << WLAN_EID_COUNTRY
) |
1439 (1ULL << WLAN_EID_ERP_INFO
) |
1440 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
1441 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
1442 (1ULL << WLAN_EID_HT_CAPABILITY
) |
1443 (1ULL << WLAN_EID_HT_INFORMATION
);
1445 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
1446 struct ieee80211_mgmt
*mgmt
,
1448 struct ieee80211_rx_status
*rx_status
)
1450 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1451 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1453 struct ieee802_11_elems elems
;
1454 struct ieee80211_local
*local
= sdata
->local
;
1456 bool erp_valid
, directed_tim
= false;
1461 ASSERT_MGD_MTX(ifmgd
);
1463 /* Process beacon from the current BSS */
1464 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
1468 if (rx_status
->freq
!= local
->hw
.conf
.channel
->center_freq
)
1472 * We might have received a number of frames, among them a
1473 * disassoc frame and a beacon...
1475 if (!ifmgd
->associated
)
1478 bssid
= ifmgd
->associated
->bssid
;
1481 * And in theory even frames from a different AP we were just
1482 * associated to a split-second ago!
1484 if (memcmp(bssid
, mgmt
->bssid
, ETH_ALEN
) != 0)
1487 /* Track average RSSI from the Beacon frames of the current AP */
1488 ifmgd
->last_beacon_signal
= rx_status
->signal
;
1489 if (ifmgd
->flags
& IEEE80211_STA_RESET_SIGNAL_AVE
) {
1490 ifmgd
->flags
&= ~IEEE80211_STA_RESET_SIGNAL_AVE
;
1491 ifmgd
->ave_beacon_signal
= rx_status
->signal
;
1492 ifmgd
->last_cqm_event_signal
= 0;
1494 ifmgd
->ave_beacon_signal
=
1495 (IEEE80211_SIGNAL_AVE_WEIGHT
* rx_status
->signal
* 16 +
1496 (16 - IEEE80211_SIGNAL_AVE_WEIGHT
) *
1497 ifmgd
->ave_beacon_signal
) / 16;
1499 if (bss_conf
->cqm_rssi_thold
&&
1500 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_CQM_RSSI
)) {
1501 int sig
= ifmgd
->ave_beacon_signal
/ 16;
1502 int last_event
= ifmgd
->last_cqm_event_signal
;
1503 int thold
= bss_conf
->cqm_rssi_thold
;
1504 int hyst
= bss_conf
->cqm_rssi_hyst
;
1506 (last_event
== 0 || sig
< last_event
- hyst
)) {
1507 ifmgd
->last_cqm_event_signal
= sig
;
1508 ieee80211_cqm_rssi_notify(
1510 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
,
1512 } else if (sig
> thold
&&
1513 (last_event
== 0 || sig
> last_event
+ hyst
)) {
1514 ifmgd
->last_cqm_event_signal
= sig
;
1515 ieee80211_cqm_rssi_notify(
1517 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
,
1522 if (ifmgd
->flags
& IEEE80211_STA_BEACON_POLL
) {
1523 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1524 if (net_ratelimit()) {
1525 printk(KERN_DEBUG
"%s: cancelling probereq poll due "
1526 "to a received beacon\n", sdata
->name
);
1529 ifmgd
->flags
&= ~IEEE80211_STA_BEACON_POLL
;
1530 mutex_lock(&local
->iflist_mtx
);
1531 ieee80211_recalc_ps(local
, -1);
1532 mutex_unlock(&local
->iflist_mtx
);
1536 * Push the beacon loss detection into the future since
1537 * we are processing a beacon from the AP just now.
1539 mod_beacon_timer(sdata
);
1541 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
1542 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
1543 len
- baselen
, &elems
,
1544 care_about_ies
, ncrc
);
1546 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1547 directed_tim
= ieee80211_check_tim(elems
.tim
, elems
.tim_len
,
1550 if (ncrc
!= ifmgd
->beacon_crc
) {
1551 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
,
1554 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1555 elems
.wmm_param_len
);
1558 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
1560 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1561 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1562 ieee80211_hw_config(local
,
1563 IEEE80211_CONF_CHANGE_PS
);
1564 ieee80211_send_nullfunc(local
, sdata
, 0);
1566 local
->pspolling
= true;
1569 * Here is assumed that the driver will be
1570 * able to send ps-poll frame and receive a
1571 * response even though power save mode is
1572 * enabled, but some drivers might require
1573 * to disable power save here. This needs
1574 * to be investigated.
1576 ieee80211_send_pspoll(local
, sdata
);
1581 if (ncrc
== ifmgd
->beacon_crc
)
1583 ifmgd
->beacon_crc
= ncrc
;
1585 if (elems
.erp_info
&& elems
.erp_info_len
>= 1) {
1587 erp_value
= elems
.erp_info
[0];
1591 changed
|= ieee80211_handle_bss_capability(sdata
,
1592 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
1593 erp_valid
, erp_value
);
1596 if (elems
.ht_cap_elem
&& elems
.ht_info_elem
&& elems
.wmm_param
&&
1597 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
)) {
1598 struct sta_info
*sta
;
1599 struct ieee80211_supported_band
*sband
;
1600 u16 ap_ht_cap_flags
;
1604 sta
= sta_info_get(sdata
, bssid
);
1605 if (WARN_ON(!sta
)) {
1610 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1612 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1613 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1615 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1619 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1620 bssid
, ap_ht_cap_flags
);
1623 /* Note: country IE parsing is done for us by cfg80211 */
1624 if (elems
.country_elem
) {
1625 /* TODO: IBSS also needs this */
1626 if (elems
.pwr_constr_elem
)
1627 ieee80211_handle_pwr_constr(sdata
,
1628 le16_to_cpu(mgmt
->u
.probe_resp
.capab_info
),
1629 elems
.pwr_constr_elem
,
1630 elems
.pwr_constr_elem_len
);
1633 ieee80211_bss_info_change_notify(sdata
, changed
);
1636 ieee80211_rx_result
ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data
*sdata
,
1637 struct sk_buff
*skb
)
1639 struct ieee80211_local
*local
= sdata
->local
;
1640 struct ieee80211_mgmt
*mgmt
;
1644 return RX_DROP_MONITOR
;
1646 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1647 fc
= le16_to_cpu(mgmt
->frame_control
);
1649 switch (fc
& IEEE80211_FCTL_STYPE
) {
1650 case IEEE80211_STYPE_PROBE_RESP
:
1651 case IEEE80211_STYPE_BEACON
:
1652 case IEEE80211_STYPE_DEAUTH
:
1653 case IEEE80211_STYPE_DISASSOC
:
1654 case IEEE80211_STYPE_ACTION
:
1655 skb_queue_tail(&sdata
->u
.mgd
.skb_queue
, skb
);
1656 ieee80211_queue_work(&local
->hw
, &sdata
->u
.mgd
.work
);
1660 return RX_DROP_MONITOR
;
1663 static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
1664 struct sk_buff
*skb
)
1666 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1667 struct ieee80211_rx_status
*rx_status
;
1668 struct ieee80211_mgmt
*mgmt
;
1669 enum rx_mgmt_action rma
= RX_MGMT_NONE
;
1672 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
1673 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1674 fc
= le16_to_cpu(mgmt
->frame_control
);
1676 mutex_lock(&ifmgd
->mtx
);
1678 if (ifmgd
->associated
&&
1679 memcmp(ifmgd
->associated
->bssid
, mgmt
->bssid
, ETH_ALEN
) == 0) {
1680 switch (fc
& IEEE80211_FCTL_STYPE
) {
1681 case IEEE80211_STYPE_BEACON
:
1682 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
,
1685 case IEEE80211_STYPE_PROBE_RESP
:
1686 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
1688 case IEEE80211_STYPE_DEAUTH
:
1689 rma
= ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
1691 case IEEE80211_STYPE_DISASSOC
:
1692 rma
= ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
1694 case IEEE80211_STYPE_ACTION
:
1695 switch (mgmt
->u
.action
.category
) {
1696 case WLAN_CATEGORY_BACK
: {
1697 struct ieee80211_local
*local
= sdata
->local
;
1699 struct sta_info
*sta
;
1702 sta
= sta_info_get(sdata
, mgmt
->sa
);
1710 switch (mgmt
->u
.action
.u
.addba_req
.action_code
) {
1711 case WLAN_ACTION_ADDBA_REQ
:
1712 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1713 sizeof(mgmt
->u
.action
.u
.addba_req
)))
1715 ieee80211_process_addba_request(local
, sta
, mgmt
, len
);
1717 case WLAN_ACTION_ADDBA_RESP
:
1718 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1719 sizeof(mgmt
->u
.action
.u
.addba_resp
)))
1721 ieee80211_process_addba_resp(local
, sta
, mgmt
, len
);
1723 case WLAN_ACTION_DELBA
:
1724 if (len
< (IEEE80211_MIN_ACTION_SIZE
+
1725 sizeof(mgmt
->u
.action
.u
.delba
)))
1727 ieee80211_process_delba(sdata
, sta
, mgmt
, len
);
1734 case WLAN_CATEGORY_SPECTRUM_MGMT
:
1735 ieee80211_sta_process_chanswitch(sdata
,
1736 &mgmt
->u
.action
.u
.chan_switch
.sw_elem
,
1737 (void *)ifmgd
->associated
->priv
,
1738 rx_status
->mactime
);
1742 mutex_unlock(&ifmgd
->mtx
);
1748 case RX_MGMT_CFG80211_DEAUTH
:
1749 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1751 case RX_MGMT_CFG80211_DISASSOC
:
1752 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1755 WARN(1, "unexpected: %d", rma
);
1760 mutex_unlock(&ifmgd
->mtx
);
1762 if (skb
->len
>= 24 + 2 /* mgmt + deauth reason */ &&
1763 (fc
& IEEE80211_FCTL_STYPE
) == IEEE80211_STYPE_DEAUTH
) {
1764 struct ieee80211_local
*local
= sdata
->local
;
1765 struct ieee80211_work
*wk
;
1767 mutex_lock(&local
->work_mtx
);
1768 list_for_each_entry(wk
, &local
->work_list
, list
) {
1769 if (wk
->sdata
!= sdata
)
1772 if (wk
->type
!= IEEE80211_WORK_ASSOC
)
1775 if (memcmp(mgmt
->bssid
, wk
->filter_ta
, ETH_ALEN
))
1777 if (memcmp(mgmt
->sa
, wk
->filter_ta
, ETH_ALEN
))
1781 * Printing the message only here means we can't
1782 * spuriously print it, but it also means that it
1783 * won't be printed when the frame comes in before
1784 * we even tried to associate or in similar cases.
1786 * Ultimately, I suspect cfg80211 should print the
1790 "%s: deauthenticated from %pM (Reason: %u)\n",
1791 sdata
->name
, mgmt
->bssid
,
1792 le16_to_cpu(mgmt
->u
.deauth
.reason_code
));
1794 list_del_rcu(&wk
->list
);
1798 mutex_unlock(&local
->work_mtx
);
1800 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1806 static void ieee80211_sta_timer(unsigned long data
)
1808 struct ieee80211_sub_if_data
*sdata
=
1809 (struct ieee80211_sub_if_data
*) data
;
1810 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1811 struct ieee80211_local
*local
= sdata
->local
;
1813 if (local
->quiescing
) {
1814 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1818 ieee80211_queue_work(&local
->hw
, &ifmgd
->work
);
1821 static void ieee80211_sta_work(struct work_struct
*work
)
1823 struct ieee80211_sub_if_data
*sdata
=
1824 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.work
);
1825 struct ieee80211_local
*local
= sdata
->local
;
1826 struct ieee80211_if_managed
*ifmgd
;
1827 struct sk_buff
*skb
;
1829 if (!ieee80211_sdata_running(sdata
))
1832 if (local
->scanning
)
1835 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
1839 * ieee80211_queue_work() should have picked up most cases,
1840 * here we'll pick the the rest.
1842 if (WARN(local
->suspended
, "STA MLME work scheduled while "
1843 "going to suspend\n"))
1846 ifmgd
= &sdata
->u
.mgd
;
1848 /* first process frames to avoid timing out while a frame is pending */
1849 while ((skb
= skb_dequeue(&ifmgd
->skb_queue
)))
1850 ieee80211_sta_rx_queued_mgmt(sdata
, skb
);
1852 /* then process the rest of the work */
1853 mutex_lock(&ifmgd
->mtx
);
1855 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1856 IEEE80211_STA_CONNECTION_POLL
) &&
1857 ifmgd
->associated
) {
1860 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
1861 if (time_is_after_jiffies(ifmgd
->probe_timeout
))
1862 run_again(ifmgd
, ifmgd
->probe_timeout
);
1864 else if (ifmgd
->probe_send_count
< IEEE80211_MAX_PROBE_TRIES
) {
1865 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1866 printk(KERN_DEBUG
"No probe response from AP %pM"
1867 " after %dms, try %d\n", bssid
,
1868 (1000 * IEEE80211_PROBE_WAIT
)/HZ
,
1869 ifmgd
->probe_send_count
);
1871 ieee80211_mgd_probe_ap_send(sdata
);
1874 * We actually lost the connection ... or did we?
1877 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1878 IEEE80211_STA_BEACON_POLL
);
1879 printk(KERN_DEBUG
"No probe response from AP %pM"
1880 " after %dms, disconnecting.\n",
1881 bssid
, (1000 * IEEE80211_PROBE_WAIT
)/HZ
);
1882 ieee80211_set_disassoc(sdata
, true);
1883 ieee80211_recalc_idle(local
);
1884 mutex_unlock(&ifmgd
->mtx
);
1886 * must be outside lock due to cfg80211,
1887 * but that's not a problem.
1889 ieee80211_send_deauth_disassoc(sdata
, bssid
,
1890 IEEE80211_STYPE_DEAUTH
,
1891 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
1893 mutex_lock(&ifmgd
->mtx
);
1897 mutex_unlock(&ifmgd
->mtx
);
1900 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
1902 struct ieee80211_sub_if_data
*sdata
=
1903 (struct ieee80211_sub_if_data
*) data
;
1904 struct ieee80211_local
*local
= sdata
->local
;
1906 if (local
->quiescing
)
1909 ieee80211_queue_work(&sdata
->local
->hw
,
1910 &sdata
->u
.mgd
.beacon_connection_loss_work
);
1913 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
1915 struct ieee80211_sub_if_data
*sdata
=
1916 (struct ieee80211_sub_if_data
*) data
;
1917 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1918 struct ieee80211_local
*local
= sdata
->local
;
1920 if (local
->quiescing
)
1923 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
1926 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
1928 struct ieee80211_sub_if_data
*sdata
=
1929 container_of(work
, struct ieee80211_sub_if_data
,
1930 u
.mgd
.monitor_work
);
1932 ieee80211_mgd_probe_ap(sdata
, false);
1935 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
1937 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
1938 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_BEACON_POLL
|
1939 IEEE80211_STA_CONNECTION_POLL
);
1941 /* let's probe the connection once */
1942 ieee80211_queue_work(&sdata
->local
->hw
,
1943 &sdata
->u
.mgd
.monitor_work
);
1944 /* and do all the other regular work too */
1945 ieee80211_queue_work(&sdata
->local
->hw
,
1946 &sdata
->u
.mgd
.work
);
1951 void ieee80211_sta_quiesce(struct ieee80211_sub_if_data
*sdata
)
1953 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1956 * we need to use atomic bitops for the running bits
1957 * only because both timers might fire at the same
1958 * time -- the code here is properly synchronised.
1961 cancel_work_sync(&ifmgd
->work
);
1962 cancel_work_sync(&ifmgd
->beacon_connection_loss_work
);
1963 if (del_timer_sync(&ifmgd
->timer
))
1964 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1966 cancel_work_sync(&ifmgd
->chswitch_work
);
1967 if (del_timer_sync(&ifmgd
->chswitch_timer
))
1968 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
1970 cancel_work_sync(&ifmgd
->monitor_work
);
1971 /* these will just be re-established on connection */
1972 del_timer_sync(&ifmgd
->conn_mon_timer
);
1973 del_timer_sync(&ifmgd
->bcn_mon_timer
);
1976 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
1978 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1980 if (test_and_clear_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
))
1981 add_timer(&ifmgd
->timer
);
1982 if (test_and_clear_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
))
1983 add_timer(&ifmgd
->chswitch_timer
);
1987 /* interface setup */
1988 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
1990 struct ieee80211_if_managed
*ifmgd
;
1992 ifmgd
= &sdata
->u
.mgd
;
1993 INIT_WORK(&ifmgd
->work
, ieee80211_sta_work
);
1994 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
1995 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
1996 INIT_WORK(&ifmgd
->beacon_connection_loss_work
,
1997 ieee80211_beacon_connection_loss_work
);
1998 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
1999 (unsigned long) sdata
);
2000 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
2001 (unsigned long) sdata
);
2002 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
2003 (unsigned long) sdata
);
2004 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
2005 (unsigned long) sdata
);
2006 skb_queue_head_init(&ifmgd
->skb_queue
);
2010 mutex_init(&ifmgd
->mtx
);
2012 if (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
)
2013 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
2015 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
2018 /* scan finished notification */
2019 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
2021 struct ieee80211_sub_if_data
*sdata
= local
->scan_sdata
;
2023 /* Restart STA timers */
2025 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
)
2026 ieee80211_restart_sta_timer(sdata
);
2030 int ieee80211_max_network_latency(struct notifier_block
*nb
,
2031 unsigned long data
, void *dummy
)
2033 s32 latency_usec
= (s32
) data
;
2034 struct ieee80211_local
*local
=
2035 container_of(nb
, struct ieee80211_local
,
2036 network_latency_notifier
);
2038 mutex_lock(&local
->iflist_mtx
);
2039 ieee80211_recalc_ps(local
, latency_usec
);
2040 mutex_unlock(&local
->iflist_mtx
);
2046 static enum work_done_result
2047 ieee80211_probe_auth_done(struct ieee80211_work
*wk
,
2048 struct sk_buff
*skb
)
2051 cfg80211_send_auth_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
2052 return WORK_DONE_DESTROY
;
2055 if (wk
->type
== IEEE80211_WORK_AUTH
) {
2056 cfg80211_send_rx_auth(wk
->sdata
->dev
, skb
->data
, skb
->len
);
2057 return WORK_DONE_DESTROY
;
2060 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
2061 ieee80211_rx_mgmt_probe_resp(wk
->sdata
, skb
);
2062 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
2064 wk
->type
= IEEE80211_WORK_AUTH
;
2065 wk
->probe_auth
.tries
= 0;
2066 return WORK_DONE_REQUEUE
;
2069 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
2070 struct cfg80211_auth_request
*req
)
2073 struct ieee80211_work
*wk
;
2076 if (req
->local_state_change
)
2077 return 0; /* no need to update mac80211 state */
2079 switch (req
->auth_type
) {
2080 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
2081 auth_alg
= WLAN_AUTH_OPEN
;
2083 case NL80211_AUTHTYPE_SHARED_KEY
:
2084 auth_alg
= WLAN_AUTH_SHARED_KEY
;
2086 case NL80211_AUTHTYPE_FT
:
2087 auth_alg
= WLAN_AUTH_FT
;
2089 case NL80211_AUTHTYPE_NETWORK_EAP
:
2090 auth_alg
= WLAN_AUTH_LEAP
;
2096 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
2100 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);
2102 if (req
->ie
&& req
->ie_len
) {
2103 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
2104 wk
->ie_len
= req
->ie_len
;
2107 if (req
->key
&& req
->key_len
) {
2108 wk
->probe_auth
.key_len
= req
->key_len
;
2109 wk
->probe_auth
.key_idx
= req
->key_idx
;
2110 memcpy(wk
->probe_auth
.key
, req
->key
, req
->key_len
);
2113 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
2114 memcpy(wk
->probe_auth
.ssid
, ssid
+ 2, ssid
[1]);
2115 wk
->probe_auth
.ssid_len
= ssid
[1];
2117 wk
->probe_auth
.algorithm
= auth_alg
;
2118 wk
->probe_auth
.privacy
= req
->bss
->capability
& WLAN_CAPABILITY_PRIVACY
;
2120 /* if we already have a probe, don't probe again */
2121 if (req
->bss
->proberesp_ies
)
2122 wk
->type
= IEEE80211_WORK_AUTH
;
2124 wk
->type
= IEEE80211_WORK_DIRECT_PROBE
;
2125 wk
->chan
= req
->bss
->channel
;
2127 wk
->done
= ieee80211_probe_auth_done
;
2129 ieee80211_add_work(wk
);
2133 static enum work_done_result
ieee80211_assoc_done(struct ieee80211_work
*wk
,
2134 struct sk_buff
*skb
)
2136 struct ieee80211_mgmt
*mgmt
;
2140 cfg80211_send_assoc_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
2141 return WORK_DONE_DESTROY
;
2144 mgmt
= (void *)skb
->data
;
2145 status
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
2147 if (status
== WLAN_STATUS_SUCCESS
) {
2148 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
2149 if (!ieee80211_assoc_success(wk
, mgmt
, skb
->len
)) {
2150 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
2151 /* oops -- internal error -- send timeout for now */
2152 cfg80211_send_assoc_timeout(wk
->sdata
->dev
,
2154 return WORK_DONE_DESTROY
;
2156 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
2159 cfg80211_send_rx_assoc(wk
->sdata
->dev
, skb
->data
, skb
->len
);
2160 return WORK_DONE_DESTROY
;
2163 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
2164 struct cfg80211_assoc_request
*req
)
2166 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2167 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
2168 struct ieee80211_work
*wk
;
2172 mutex_lock(&ifmgd
->mtx
);
2173 if (ifmgd
->associated
) {
2174 if (!req
->prev_bssid
||
2175 memcmp(req
->prev_bssid
, ifmgd
->associated
->bssid
,
2178 * We are already associated and the request was not a
2179 * reassociation request from the current BSS, so
2182 mutex_unlock(&ifmgd
->mtx
);
2186 /* Trying to reassociate - clear previous association state */
2187 ieee80211_set_disassoc(sdata
, true);
2189 mutex_unlock(&ifmgd
->mtx
);
2191 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
2195 ifmgd
->flags
&= ~IEEE80211_STA_DISABLE_11N
;
2196 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
2198 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++)
2199 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
2200 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
2201 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
)
2202 ifmgd
->flags
|= IEEE80211_STA_DISABLE_11N
;
2205 if (req
->ie
&& req
->ie_len
) {
2206 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
2207 wk
->ie_len
= req
->ie_len
;
2211 wk
->assoc
.bss
= req
->bss
;
2213 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);
2215 /* new association always uses requested smps mode */
2216 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
2217 if (ifmgd
->powersave
)
2218 ifmgd
->ap_smps
= IEEE80211_SMPS_DYNAMIC
;
2220 ifmgd
->ap_smps
= IEEE80211_SMPS_OFF
;
2222 ifmgd
->ap_smps
= ifmgd
->req_smps
;
2224 wk
->assoc
.smps
= ifmgd
->ap_smps
;
2226 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
2227 * We still associate in non-HT mode (11a/b/g) if any one of these
2228 * ciphers is configured as pairwise.
2229 * We can set this to true for non-11n hardware, that'll be checked
2230 * separately along with the peer capabilities.
2232 wk
->assoc
.use_11n
= !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
);
2233 wk
->assoc
.capability
= req
->bss
->capability
;
2234 wk
->assoc
.wmm_used
= bss
->wmm_used
;
2235 wk
->assoc
.supp_rates
= bss
->supp_rates
;
2236 wk
->assoc
.supp_rates_len
= bss
->supp_rates_len
;
2237 wk
->assoc
.ht_information_ie
=
2238 ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_INFORMATION
);
2240 if (bss
->wmm_used
&& bss
->uapsd_supported
&&
2241 (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_UAPSD
)) {
2242 wk
->assoc
.uapsd_used
= true;
2243 ifmgd
->flags
|= IEEE80211_STA_UAPSD_ENABLED
;
2245 wk
->assoc
.uapsd_used
= false;
2246 ifmgd
->flags
&= ~IEEE80211_STA_UAPSD_ENABLED
;
2249 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
2250 memcpy(wk
->assoc
.ssid
, ssid
+ 2, ssid
[1]);
2251 wk
->assoc
.ssid_len
= ssid
[1];
2253 if (req
->prev_bssid
)
2254 memcpy(wk
->assoc
.prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
2256 wk
->type
= IEEE80211_WORK_ASSOC
;
2257 wk
->chan
= req
->bss
->channel
;
2259 wk
->done
= ieee80211_assoc_done
;
2262 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
2263 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
2265 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
2266 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
2269 if (req
->crypto
.control_port
)
2270 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
2272 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
2274 ieee80211_add_work(wk
);
2278 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
2279 struct cfg80211_deauth_request
*req
,
2282 struct ieee80211_local
*local
= sdata
->local
;
2283 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2284 struct ieee80211_work
*wk
;
2285 const u8
*bssid
= req
->bss
->bssid
;
2287 mutex_lock(&ifmgd
->mtx
);
2289 if (ifmgd
->associated
== req
->bss
) {
2290 bssid
= req
->bss
->bssid
;
2291 ieee80211_set_disassoc(sdata
, true);
2292 mutex_unlock(&ifmgd
->mtx
);
2294 bool not_auth_yet
= false;
2296 mutex_unlock(&ifmgd
->mtx
);
2298 mutex_lock(&local
->work_mtx
);
2299 list_for_each_entry(wk
, &local
->work_list
, list
) {
2300 if (wk
->sdata
!= sdata
)
2303 if (wk
->type
!= IEEE80211_WORK_DIRECT_PROBE
&&
2304 wk
->type
!= IEEE80211_WORK_AUTH
&&
2305 wk
->type
!= IEEE80211_WORK_ASSOC
)
2308 if (memcmp(req
->bss
->bssid
, wk
->filter_ta
, ETH_ALEN
))
2311 not_auth_yet
= wk
->type
== IEEE80211_WORK_DIRECT_PROBE
;
2312 list_del_rcu(&wk
->list
);
2316 mutex_unlock(&local
->work_mtx
);
2319 * If somebody requests authentication and we haven't
2320 * sent out an auth frame yet there's no need to send
2321 * out a deauth frame either. If the state was PROBE,
2322 * then this is the case. If it's AUTH we have sent a
2323 * frame, and if it's IDLE we have completed the auth
2327 __cfg80211_auth_canceled(sdata
->dev
, bssid
);
2332 printk(KERN_DEBUG
"%s: deauthenticating from %pM by local choice (reason=%d)\n",
2333 sdata
->name
, bssid
, req
->reason_code
);
2335 ieee80211_send_deauth_disassoc(sdata
, bssid
, IEEE80211_STYPE_DEAUTH
,
2336 req
->reason_code
, cookie
,
2337 !req
->local_state_change
);
2339 ieee80211_recalc_idle(sdata
->local
);
2344 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
2345 struct cfg80211_disassoc_request
*req
,
2348 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2351 mutex_lock(&ifmgd
->mtx
);
2354 * cfg80211 should catch this ... but it's racy since
2355 * we can receive a disassoc frame, process it, hand it
2356 * to cfg80211 while that's in a locked section already
2357 * trying to tell us that the user wants to disconnect.
2359 if (ifmgd
->associated
!= req
->bss
) {
2360 mutex_unlock(&ifmgd
->mtx
);
2364 printk(KERN_DEBUG
"%s: disassociating from %pM by local choice (reason=%d)\n",
2365 sdata
->name
, req
->bss
->bssid
, req
->reason_code
);
2367 memcpy(bssid
, req
->bss
->bssid
, ETH_ALEN
);
2368 ieee80211_set_disassoc(sdata
, false);
2370 mutex_unlock(&ifmgd
->mtx
);
2372 ieee80211_send_deauth_disassoc(sdata
, req
->bss
->bssid
,
2373 IEEE80211_STYPE_DISASSOC
, req
->reason_code
,
2374 cookie
, !req
->local_state_change
);
2375 sta_info_destroy_addr(sdata
, bssid
);
2377 ieee80211_recalc_idle(sdata
->local
);
2382 int ieee80211_mgd_action(struct ieee80211_sub_if_data
*sdata
,
2383 struct ieee80211_channel
*chan
,
2384 enum nl80211_channel_type channel_type
,
2385 const u8
*buf
, size_t len
, u64
*cookie
)
2387 struct ieee80211_local
*local
= sdata
->local
;
2388 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2389 struct sk_buff
*skb
;
2391 /* Check that we are on the requested channel for transmission */
2392 if ((chan
!= local
->tmp_channel
||
2393 channel_type
!= local
->tmp_channel_type
) &&
2394 (chan
!= local
->oper_channel
||
2395 channel_type
!= local
->_oper_channel_type
))
2398 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ len
);
2401 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
2403 memcpy(skb_put(skb
, len
), buf
, len
);
2405 if (!(ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
))
2406 IEEE80211_SKB_CB(skb
)->flags
|=
2407 IEEE80211_TX_INTFL_DONT_ENCRYPT
;
2408 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_NL80211_FRAME_TX
|
2409 IEEE80211_TX_CTL_REQ_TX_STATUS
;
2410 skb
->dev
= sdata
->dev
;
2411 ieee80211_tx_skb(sdata
, skb
);
2413 *cookie
= (unsigned long) skb
;
2417 void ieee80211_cqm_rssi_notify(struct ieee80211_vif
*vif
,
2418 enum nl80211_cqm_rssi_threshold_event rssi_event
,
2421 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2423 trace_api_cqm_rssi_notify(sdata
, rssi_event
);
2425 cfg80211_cqm_rssi_notify(sdata
->dev
, rssi_event
, gfp
);
2427 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify
);