2 tristate "SoC Audio for the Texas Instruments OMAP chips"
5 config SND_OMAP_SOC_MCBSP
9 config SND_OMAP_SOC_MCPDM
12 config SND_OMAP_SOC_N810
13 tristate "SoC Audio support for Nokia N810"
14 depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
15 select SND_OMAP_SOC_MCBSP
17 select SND_SOC_TLV320AIC3X
19 Say Y if you want to add support for SoC audio on Nokia N810.
21 config SND_OMAP_SOC_RX51
22 tristate "SoC Audio support for Nokia RX-51"
23 depends on SND_OMAP_SOC && MACH_NOKIA_RX51
25 select SND_OMAP_SOC_MCBSP
26 select SND_SOC_TLV320AIC3X
28 Say Y if you want to add support for SoC audio on Nokia RX-51
29 hardware. This is also known as Nokia N900 product.
31 config SND_OMAP_SOC_AMS_DELTA
32 tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
33 depends on SND_OMAP_SOC && MACH_AMS_DELTA
34 select SND_OMAP_SOC_MCBSP
35 select SND_SOC_CX20442
37 Say Y if you want to add support for SoC audio device connected to
38 a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
40 Note that in order to get those devices fully supported, you have to
41 build the kernel with standard serial port driver included and
42 configured for at least 4 ports. Then, from userspace, you must load
43 a line discipline #19 on the modem (ttyS3) serial line. The simplest
44 way to achieve this is to install util-linux-ng and use the included
45 ldattach utility. This can be started automatically from udev,
46 a simple rule like this one should do the trick (it does for me):
47 ACTION=="add", KERNEL=="controlC0", \
48 RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
50 config SND_OMAP_SOC_OSK5912
51 tristate "SoC Audio support for omap osk5912"
52 depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
53 select SND_OMAP_SOC_MCBSP
54 select SND_SOC_TLV320AIC23
56 Say Y if you want to add support for SoC audio on osk5912.
58 config SND_OMAP_SOC_OVERO
59 tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35"
60 depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35)
61 select SND_OMAP_SOC_MCBSP
62 select SND_SOC_TWL4030
64 Say Y if you want to add support for SoC audio on the
65 Gumstix Overo or CompuLab CM-T35
67 config SND_OMAP_SOC_OMAP2EVM
68 tristate "SoC Audio support for OMAP2EVM board"
69 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP2EVM
70 select SND_OMAP_SOC_MCBSP
71 select SND_SOC_TWL4030
73 Say Y if you want to add support for SoC audio on the omap2evm board.
75 config SND_OMAP_SOC_OMAP3EVM
76 tristate "SoC Audio support for OMAP3EVM board"
77 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM
78 select SND_OMAP_SOC_MCBSP
79 select SND_SOC_TWL4030
81 Say Y if you want to add support for SoC audio on the omap3evm board.
83 config SND_OMAP_SOC_AM3517EVM
84 tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
85 depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
86 select SND_OMAP_SOC_MCBSP
87 select SND_SOC_TLV320AIC23
89 Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
92 config SND_OMAP_SOC_SDP3430
93 tristate "SoC Audio support for Texas Instruments SDP3430"
94 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
95 select SND_OMAP_SOC_MCBSP
96 select SND_SOC_TWL4030
98 Say Y if you want to add support for SoC audio on Texas Instruments
101 config SND_OMAP_SOC_SDP4430
102 tristate "SoC Audio support for Texas Instruments SDP4430"
103 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP
104 select SND_OMAP_SOC_MCPDM
105 select SND_SOC_TWL6040
107 Say Y if you want to add support for SoC audio on Texas Instruments
110 config SND_OMAP_SOC_OMAP3_PANDORA
111 tristate "SoC Audio support for OMAP3 Pandora"
112 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
113 select SND_OMAP_SOC_MCBSP
114 select SND_SOC_TWL4030
116 Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
118 config SND_OMAP_SOC_OMAP3_BEAGLE
119 tristate "SoC Audio support for OMAP3 Beagle and Devkit8000"
120 depends on TWL4030_CORE && SND_OMAP_SOC
121 depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000)
122 select SND_OMAP_SOC_MCBSP
123 select SND_SOC_TWL4030
125 Say Y if you want to add support for SoC audio on the Beagleboard or
126 the clone Devkit8000.
128 config SND_OMAP_SOC_ZOOM2
129 tristate "SoC Audio support for Zoom2"
130 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2
131 select SND_OMAP_SOC_MCBSP
132 select SND_SOC_TWL4030
134 Say Y if you want to add support for Soc audio on Zoom2 board.
136 config SND_OMAP_SOC_IGEP0020
137 tristate "SoC Audio support for IGEP v2"
138 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020
139 select SND_OMAP_SOC_MCBSP
140 select SND_SOC_TWL4030
142 Say Y if you want to add support for Soc audio on IGEP v2 board.