net: fix pch_gbe section mismatch warning
[linux-2.6/next.git] / drivers / net / ll_temac.h
blob522abe2ff25a2dc5430a333b1599a9b7c9eb3213
2 #ifndef XILINX_LL_TEMAC_H
3 #define XILINX_LL_TEMAC_H
5 #include <linux/netdevice.h>
6 #include <linux/of.h>
7 #include <linux/spinlock.h>
9 #ifdef CONFIG_PPC_DCR
10 #include <asm/dcr.h>
11 #include <asm/dcr-regs.h>
12 #endif
14 /* packet size info */
15 #define XTE_HDR_SIZE 14 /* size of Ethernet header */
16 #define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
17 #define XTE_JUMBO_MTU 9000
18 #define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
20 /* Configuration options */
22 /* Accept all incoming packets.
23 * This option defaults to disabled (cleared) */
24 #define XTE_OPTION_PROMISC (1 << 0)
25 /* Jumbo frame support for Tx & Rx.
26 * This option defaults to disabled (cleared) */
27 #define XTE_OPTION_JUMBO (1 << 1)
28 /* VLAN Rx & Tx frame support.
29 * This option defaults to disabled (cleared) */
30 #define XTE_OPTION_VLAN (1 << 2)
31 /* Enable recognition of flow control frames on Rx
32 * This option defaults to enabled (set) */
33 #define XTE_OPTION_FLOW_CONTROL (1 << 4)
34 /* Strip FCS and PAD from incoming frames.
35 * Note: PAD from VLAN frames is not stripped.
36 * This option defaults to disabled (set) */
37 #define XTE_OPTION_FCS_STRIP (1 << 5)
38 /* Generate FCS field and add PAD automatically for outgoing frames.
39 * This option defaults to enabled (set) */
40 #define XTE_OPTION_FCS_INSERT (1 << 6)
41 /* Enable Length/Type error checking for incoming frames. When this option is
42 set, the MAC will filter frames that have a mismatched type/length field
43 and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
44 types of frames are encountered. When this option is cleared, the MAC will
45 allow these types of frames to be received.
46 This option defaults to enabled (set) */
47 #define XTE_OPTION_LENTYPE_ERR (1 << 7)
48 /* Enable the transmitter.
49 * This option defaults to enabled (set) */
50 #define XTE_OPTION_TXEN (1 << 11)
51 /* Enable the receiver
52 * This option defaults to enabled (set) */
53 #define XTE_OPTION_RXEN (1 << 12)
55 /* Default options set when device is initialized or reset */
56 #define XTE_OPTION_DEFAULTS \
57 (XTE_OPTION_TXEN | \
58 XTE_OPTION_FLOW_CONTROL | \
59 XTE_OPTION_RXEN)
61 /* XPS_LL_TEMAC SDMA registers definition */
63 #define TX_NXTDESC_PTR 0x00 /* r */
64 #define TX_CURBUF_ADDR 0x01 /* r */
65 #define TX_CURBUF_LENGTH 0x02 /* r */
66 #define TX_CURDESC_PTR 0x03 /* rw */
67 #define TX_TAILDESC_PTR 0x04 /* rw */
68 #define TX_CHNL_CTRL 0x05 /* rw */
70 0:7 24:31 IRQTimeout
71 8:15 16:23 IRQCount
72 16:20 11:15 Reserved
73 21 10 0
74 22 9 UseIntOnEnd
75 23 8 LdIRQCnt
76 24 7 IRQEn
77 25:28 3:6 Reserved
78 29 2 IrqErrEn
79 30 1 IrqDlyEn
80 31 0 IrqCoalEn
82 #define CHNL_CTRL_IRQ_IOE (1 << 9)
83 #define CHNL_CTRL_IRQ_EN (1 << 7)
84 #define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
85 #define CHNL_CTRL_IRQ_DLY_EN (1 << 1)
86 #define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
87 #define TX_IRQ_REG 0x06 /* rw */
89 0:7 24:31 DltTmrValue
90 8:15 16:23 ClscCntrValue
91 16:17 14:15 Reserved
92 18:21 10:13 ClscCnt
93 22:23 8:9 DlyCnt
94 24:28 3::7 Reserved
95 29 2 ErrIrq
96 30 1 DlyIrq
97 31 0 CoalIrq
99 #define TX_CHNL_STS 0x07 /* r */
101 0:9 22:31 Reserved
102 10 21 TailPErr
103 11 20 CmpErr
104 12 19 AddrErr
105 13 18 NxtPErr
106 14 17 CurPErr
107 15 16 BsyWr
108 16:23 8:15 Reserved
109 24 7 Error
110 25 6 IOE
111 26 5 SOE
112 27 4 Cmplt
113 28 3 SOP
114 29 2 EOP
115 30 1 EngBusy
116 31 0 Reserved
119 #define RX_NXTDESC_PTR 0x08 /* r */
120 #define RX_CURBUF_ADDR 0x09 /* r */
121 #define RX_CURBUF_LENGTH 0x0a /* r */
122 #define RX_CURDESC_PTR 0x0b /* rw */
123 #define RX_TAILDESC_PTR 0x0c /* rw */
124 #define RX_CHNL_CTRL 0x0d /* rw */
126 0:7 24:31 IRQTimeout
127 8:15 16:23 IRQCount
128 16:20 11:15 Reserved
129 21 10 0
130 22 9 UseIntOnEnd
131 23 8 LdIRQCnt
132 24 7 IRQEn
133 25:28 3:6 Reserved
134 29 2 IrqErrEn
135 30 1 IrqDlyEn
136 31 0 IrqCoalEn
138 #define RX_IRQ_REG 0x0e /* rw */
139 #define IRQ_COAL (1 << 0)
140 #define IRQ_DLY (1 << 1)
141 #define IRQ_ERR (1 << 2)
142 #define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
144 0:7 24:31 DltTmrValue
145 8:15 16:23 ClscCntrValue
146 16:17 14:15 Reserved
147 18:21 10:13 ClscCnt
148 22:23 8:9 DlyCnt
149 24:28 3::7 Reserved
151 #define RX_CHNL_STS 0x0f /* r */
152 #define CHNL_STS_ENGBUSY (1 << 1)
153 #define CHNL_STS_EOP (1 << 2)
154 #define CHNL_STS_SOP (1 << 3)
155 #define CHNL_STS_CMPLT (1 << 4)
156 #define CHNL_STS_SOE (1 << 5)
157 #define CHNL_STS_IOE (1 << 6)
158 #define CHNL_STS_ERR (1 << 7)
160 #define CHNL_STS_BSYWR (1 << 16)
161 #define CHNL_STS_CURPERR (1 << 17)
162 #define CHNL_STS_NXTPERR (1 << 18)
163 #define CHNL_STS_ADDRERR (1 << 19)
164 #define CHNL_STS_CMPERR (1 << 20)
165 #define CHNL_STS_TAILERR (1 << 21)
167 0:9 22:31 Reserved
168 10 21 TailPErr
169 11 20 CmpErr
170 12 19 AddrErr
171 13 18 NxtPErr
172 14 17 CurPErr
173 15 16 BsyWr
174 16:23 8:15 Reserved
175 24 7 Error
176 25 6 IOE
177 26 5 SOE
178 27 4 Cmplt
179 28 3 SOP
180 29 2 EOP
181 30 1 EngBusy
182 31 0 Reserved
185 #define DMA_CONTROL_REG 0x10 /* rw */
186 #define DMA_CONTROL_RST (1 << 0)
187 #define DMA_TAIL_ENABLE (1 << 2)
189 /* XPS_LL_TEMAC direct registers definition */
191 #define XTE_RAF0_OFFSET 0x00
192 #define RAF0_RST (1 << 0)
193 #define RAF0_MCSTREJ (1 << 1)
194 #define RAF0_BCSTREJ (1 << 2)
195 #define XTE_TPF0_OFFSET 0x04
196 #define XTE_IFGP0_OFFSET 0x08
197 #define XTE_ISR0_OFFSET 0x0c
198 #define ISR0_HARDACSCMPLT (1 << 0)
199 #define ISR0_AUTONEG (1 << 1)
200 #define ISR0_RXCMPLT (1 << 2)
201 #define ISR0_RXREJ (1 << 3)
202 #define ISR0_RXFIFOOVR (1 << 4)
203 #define ISR0_TXCMPLT (1 << 5)
204 #define ISR0_RXDCMLCK (1 << 6)
206 #define XTE_IPR0_OFFSET 0x10
207 #define XTE_IER0_OFFSET 0x14
209 #define XTE_MSW0_OFFSET 0x20
210 #define XTE_LSW0_OFFSET 0x24
211 #define XTE_CTL0_OFFSET 0x28
212 #define XTE_RDY0_OFFSET 0x2c
214 #define XTE_RSE_MIIM_RR_MASK 0x0002
215 #define XTE_RSE_MIIM_WR_MASK 0x0004
216 #define XTE_RSE_CFG_RR_MASK 0x0020
217 #define XTE_RSE_CFG_WR_MASK 0x0040
218 #define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000)
220 /* XPS_LL_TEMAC indirect registers offset definition */
222 #define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */
223 #define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */
224 #define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */
225 #define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */
226 #define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */
227 #define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */
228 #define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */
229 #define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */
230 #define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */
232 #define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */
233 #define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */
234 #define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */
235 #define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */
236 #define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */
237 #define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */
238 #define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */
240 #define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */
241 #define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */
242 #define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */
244 #define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */
245 #define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */
246 #define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */
247 #define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */
248 #define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */
249 #define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */
251 #define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */
252 #define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */
253 #define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */
254 #define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */
256 #define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */
257 #define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */
258 #define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */
259 #define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */
261 /* Interrupt Request status */
262 #define XTE_TIS_OFFSET 0x000003A0
263 #define TIS_FRIS (1 << 0)
264 #define TIS_MRIS (1 << 1)
265 #define TIS_MWIS (1 << 2)
266 #define TIS_ARIS (1 << 3)
267 #define TIS_AWIS (1 << 4)
268 #define TIS_CRIS (1 << 5)
269 #define TIS_CWIS (1 << 6)
271 #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
273 /** MII Mamagement Control register (MGTCR) */
274 #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
275 #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
277 #define CNTLREG_WRITE_ENABLE_MASK 0x8000
278 #define CNTLREG_EMAC1SEL_MASK 0x0400
279 #define CNTLREG_ADDRESSCODE_MASK 0x03ff
281 /* CDMAC descriptor status bit definitions */
283 #define STS_CTRL_APP0_ERR (1 << 31)
284 #define STS_CTRL_APP0_IRQONEND (1 << 30)
285 /* undoccumented */
286 #define STS_CTRL_APP0_STOPONEND (1 << 29)
287 #define STS_CTRL_APP0_CMPLT (1 << 28)
288 #define STS_CTRL_APP0_SOP (1 << 27)
289 #define STS_CTRL_APP0_EOP (1 << 26)
290 #define STS_CTRL_APP0_ENGBUSY (1 << 25)
291 /* undocumented */
292 #define STS_CTRL_APP0_ENGRST (1 << 24)
294 #define TX_CONTROL_CALC_CSUM_MASK 1
296 #define MULTICAST_CAM_TABLE_NUM 4
298 /* TEMAC Synthesis features */
299 #define TEMAC_FEATURE_RX_CSUM (1 << 0)
300 #define TEMAC_FEATURE_TX_CSUM (1 << 1)
302 /* TX/RX CURDESC_PTR points to first descriptor */
303 /* TX/RX TAILDESC_PTR points to last descriptor in linked list */
306 * struct cdmac_bd - LocalLink buffer descriptor format
308 * app0 bits:
309 * 0 Error
310 * 1 IrqOnEnd generate an interrupt at completion of DMA op
311 * 2 reserved
312 * 3 completed Current descriptor completed
313 * 4 SOP TX - marks first desc/ RX marks first desct
314 * 5 EOP TX marks last desc/RX marks last desc
315 * 6 EngBusy DMA is processing
316 * 7 reserved
317 * 8:31 application specific
319 struct cdmac_bd {
320 u32 next; /* Physical address of next buffer descriptor */
321 u32 phys;
322 u32 len;
323 u32 app0;
324 u32 app1; /* TX start << 16 | insert */
325 u32 app2; /* TX csum */
326 u32 app3;
327 u32 app4; /* skb for TX length for RX */
330 struct temac_local {
331 struct net_device *ndev;
332 struct device *dev;
334 /* Connection to PHY device */
335 struct phy_device *phy_dev; /* Pointer to PHY device */
336 struct device_node *phy_node;
338 /* MDIO bus data */
339 struct mii_bus *mii_bus; /* MII bus reference */
340 int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
342 /* IO registers, dma functions and IRQs */
343 void __iomem *regs;
344 void __iomem *sdma_regs;
345 #ifdef CONFIG_PPC_DCR
346 dcr_host_t sdma_dcrs;
347 #endif
348 u32 (*dma_in)(struct temac_local *, int);
349 void (*dma_out)(struct temac_local *, int, u32);
351 int tx_irq;
352 int rx_irq;
353 int emac_num;
355 struct sk_buff **rx_skb;
356 spinlock_t rx_lock;
357 struct mutex indirect_mutex;
358 u32 options; /* Current options word */
359 int last_link;
360 unsigned int temac_features;
362 /* Buffer descriptors */
363 struct cdmac_bd *tx_bd_v;
364 dma_addr_t tx_bd_p;
365 struct cdmac_bd *rx_bd_v;
366 dma_addr_t rx_bd_p;
367 int tx_bd_ci;
368 int tx_bd_next;
369 int tx_bd_tail;
370 int rx_bd_ci;
373 /* xilinx_temac.c */
374 u32 temac_ior(struct temac_local *lp, int offset);
375 void temac_iow(struct temac_local *lp, int offset, u32 value);
376 int temac_indirect_busywait(struct temac_local *lp);
377 u32 temac_indirect_in32(struct temac_local *lp, int reg);
378 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
381 /* xilinx_temac_mdio.c */
382 int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
383 void temac_mdio_teardown(struct temac_local *lp);
385 #endif /* XILINX_LL_TEMAC_H */