?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ath5k: fix values for bus error bits in ISR2
[linux-2.6/next.git] / drivers / media / video / em28xx / em28xx-cards.c
blobc43fdb9bc88810c3f2f658f8cb3495d70940a3c2
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/msp3400.h>
32 #include <media/saa7115.h>
33 #include <media/tvp5150.h>
34 #include <media/tvaudio.h>
35 #include <media/i2c-addr.h>
36 #include <media/tveeprom.h>
37 #include <media/v4l2-common.h>
38 #include <media/v4l2-chip-ident.h>
39
40 #include "em28xx.h"
41
42 #define DRIVER_NAME "em28xx"
43
44 static int tuner = -1;
45 module_param(tuner, int, 0444);
46 MODULE_PARM_DESC(tuner, "tuner type");
47
48 static unsigned int disable_ir;
49 module_param(disable_ir, int, 0444);
50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
51
52 static unsigned int disable_usb_speed_check;
53 module_param(disable_usb_speed_check, int, 0444);
54 MODULE_PARM_DESC(disable_usb_speed_check,
55 "override min bandwidth requirement of 480M bps");
56
57 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
58 module_param_array(card, int, NULL, 0444);
59 MODULE_PARM_DESC(card, "card type");
60
61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
62 static unsigned long em28xx_devused;
63
64 struct em28xx_hash_table {
65 unsigned long hash;
66 unsigned int model;
67 unsigned int tuner;
68 };
69
70 /*
71 * Reset sequences for analog/digital modes
72 */
73
74 /* Reset for the most [analog] boards */
75 static struct em28xx_reg_seq default_analog[] = {
76 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Reset for the most [digital] boards */
81 static struct em28xx_reg_seq default_digital[] = {
82 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
83 { -1, -1, -1, -1},
84 };
85
86 /* Board Hauppauge WinTV HVR 900 analog */
87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
88 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
89 {0x05, 0xff, 0x10, 10},
90 { -1, -1, -1, -1},
91 };
92
93 /* Board Hauppauge WinTV HVR 900 digital */
94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
95 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
96 {EM2880_R04_GPO, 0x04, 0x0f, 10},
97 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
98 { -1, -1, -1, -1},
99 };
100
101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
103 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
104 { -1, -1, -1, -1},
105 };
106
107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
108
109 /* Board - EM2870 Kworld 355u
110 Analog - No input analog */
111
112 /* Board - EM2882 Kworld 315U digital */
113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
114 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
115 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
116 {EM2880_R04_GPO, 0x04, 0xff, 10},
117 {EM2880_R04_GPO, 0x0c, 0xff, 10},
118 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
119 { -1, -1, -1, -1},
120 };
121
122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
123 {EM2880_R04_GPO, 0x08, 0xff, 10},
124 {EM2880_R04_GPO, 0x0c, 0xff, 10},
125 {EM2880_R04_GPO, 0x08, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 { -1, -1, -1, -1},
128 };
129
130 static struct em28xx_reg_seq kworld_330u_analog[] = {
131 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
132 {EM2880_R04_GPO, 0x00, 0xff, 10},
133 { -1, -1, -1, -1},
134 };
135
136 static struct em28xx_reg_seq kworld_330u_digital[] = {
137 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
138 {EM2880_R04_GPO, 0x08, 0xff, 10},
139 { -1, -1, -1, -1},
140 };
141
142 /* Evga inDtube
143 GPIO0 - Enable digital power (s5h1409) - low to enable
144 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
145 GPIO4 - xc3028 reset
146 GOP3 - s5h1409 reset
147 */
148 static struct em28xx_reg_seq evga_indtube_analog[] = {
149 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
150 { -1, -1, -1, -1},
151 };
152
153 static struct em28xx_reg_seq evga_indtube_digital[] = {
154 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
155 {EM2880_R04_GPO, 0x04, 0xff, 10},
156 {EM2880_R04_GPO, 0x0c, 0xff, 1},
157 { -1, -1, -1, -1},
158 };
159
160 /* Callback for the most boards */
161 static struct em28xx_reg_seq default_tuner_gpio[] = {
162 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
163 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
164 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
165 { -1, -1, -1, -1},
166 };
167
168 /* Mute/unmute */
169 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
170 {EM28XX_R08_GPIO, 5, 7, 10},
171 { -1, -1, -1, -1},
172 };
173
174 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
175 {EM28XX_R08_GPIO, 4, 7, 10},
176 { -1, -1, -1, -1},
177 };
178
179 static struct em28xx_reg_seq compro_mute_gpio[] = {
180 {EM28XX_R08_GPIO, 6, 7, 10},
181 { -1, -1, -1, -1},
182 };
183
184 /* Terratec AV350 */
185 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
186 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
187 { -1, -1, -1, -1},
188 };
189
190 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
191 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
192 { -1, -1, -1, -1},
193 };
194 /*
195 * Board definitions
196 */
197 struct em28xx_board em28xx_boards[] = {
198 [EM2750_BOARD_UNKNOWN] = {
199 .name = "Unknown EM2750/EM2751 webcam grabber",
200 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
201 .tuner_type = TUNER_ABSENT, /* This is a webcam */
202 .input = { {
203 .type = EM28XX_VMUX_COMPOSITE1,
204 .vmux = 0,
205 .amux = EM28XX_AMUX_VIDEO,
206 } },
207 },
208 [EM2800_BOARD_UNKNOWN] = {
209 .name = "Unknown EM2800 video grabber",
210 .is_em2800 = 1,
211 .tda9887_conf = TDA9887_PRESENT,
212 .decoder = EM28XX_SAA711X,
213 .tuner_type = TUNER_ABSENT,
214 .input = { {
215 .type = EM28XX_VMUX_COMPOSITE1,
216 .vmux = SAA7115_COMPOSITE0,
217 .amux = EM28XX_AMUX_LINE_IN,
218 }, {
219 .type = EM28XX_VMUX_SVIDEO,
220 .vmux = SAA7115_SVIDEO3,
221 .amux = EM28XX_AMUX_LINE_IN,
222 } },
223 },
224 [EM2820_BOARD_UNKNOWN] = {
225 .name = "Unknown EM2750/28xx video grabber",
226 .tuner_type = TUNER_ABSENT,
227 },
228 [EM2750_BOARD_DLCW_130] = {
229 /* Beijing Huaqi Information Digital Technology Co., Ltd */
230 .name = "Huaqi DLCW-130",
231 .valid = EM28XX_BOARD_NOT_VALIDATED,
232 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
233 .tuner_type = TUNER_ABSENT, /* This is a webcam */
234 .input = { {
235 .type = EM28XX_VMUX_COMPOSITE1,
236 .vmux = 0,
237 .amux = EM28XX_AMUX_VIDEO,
238 } },
239 },
240 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
241 .name = "Kworld PVR TV 2800 RF",
242 .tuner_type = TUNER_TEMIC_PAL,
243 .tda9887_conf = TDA9887_PRESENT,
244 .decoder = EM28XX_SAA711X,
245 .input = { {
246 .type = EM28XX_VMUX_COMPOSITE1,
247 .vmux = SAA7115_COMPOSITE0,
248 .amux = EM28XX_AMUX_LINE_IN,
249 }, {
250 .type = EM28XX_VMUX_SVIDEO,
251 .vmux = SAA7115_SVIDEO3,
252 .amux = EM28XX_AMUX_LINE_IN,
253 } },
254 },
255 [EM2820_BOARD_GADMEI_TVR200] = {
256 .name = "Gadmei TVR200",
257 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
258 .tda9887_conf = TDA9887_PRESENT,
259 .decoder = EM28XX_SAA711X,
260 .input = { {
261 .type = EM28XX_VMUX_TELEVISION,
262 .vmux = SAA7115_COMPOSITE2,
263 .amux = EM28XX_AMUX_LINE_IN,
264 }, {
265 .type = EM28XX_VMUX_COMPOSITE1,
266 .vmux = SAA7115_COMPOSITE0,
267 .amux = EM28XX_AMUX_LINE_IN,
268 }, {
269 .type = EM28XX_VMUX_SVIDEO,
270 .vmux = SAA7115_SVIDEO3,
271 .amux = EM28XX_AMUX_LINE_IN,
272 } },
273 },
274 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
275 .name = "Terratec Cinergy 250 USB",
276 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
277 .tda9887_conf = TDA9887_PRESENT,
278 .decoder = EM28XX_SAA711X,
279 .input = { {
280 .type = EM28XX_VMUX_TELEVISION,
281 .vmux = SAA7115_COMPOSITE2,
282 .amux = EM28XX_AMUX_LINE_IN,
283 }, {
284 .type = EM28XX_VMUX_COMPOSITE1,
285 .vmux = SAA7115_COMPOSITE0,
286 .amux = EM28XX_AMUX_LINE_IN,
287 }, {
288 .type = EM28XX_VMUX_SVIDEO,
289 .vmux = SAA7115_SVIDEO3,
290 .amux = EM28XX_AMUX_LINE_IN,
291 } },
292 },
293 [EM2820_BOARD_PINNACLE_USB_2] = {
294 .name = "Pinnacle PCTV USB 2",
295 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
296 .tda9887_conf = TDA9887_PRESENT,
297 .decoder = EM28XX_SAA711X,
298 .input = { {
299 .type = EM28XX_VMUX_TELEVISION,
300 .vmux = SAA7115_COMPOSITE2,
301 .amux = EM28XX_AMUX_VIDEO,
302 }, {
303 .type = EM28XX_VMUX_COMPOSITE1,
304 .vmux = SAA7115_COMPOSITE0,
305 .amux = EM28XX_AMUX_LINE_IN,
306 }, {
307 .type = EM28XX_VMUX_SVIDEO,
308 .vmux = SAA7115_SVIDEO3,
309 .amux = EM28XX_AMUX_LINE_IN,
310 } },
311 },
312 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
313 .name = "Hauppauge WinTV USB 2",
314 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
315 .tda9887_conf = TDA9887_PRESENT |
316 TDA9887_PORT1_ACTIVE |
317 TDA9887_PORT2_ACTIVE,
318 .decoder = EM28XX_TVP5150,
319 .has_msp34xx = 1,
320 .input = { {
321 .type = EM28XX_VMUX_TELEVISION,
322 .vmux = TVP5150_COMPOSITE0,
323 .amux = MSP_INPUT_DEFAULT,
324 }, {
325 .type = EM28XX_VMUX_SVIDEO,
326 .vmux = TVP5150_SVIDEO,
327 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
328 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
329 } },
330 },
331 [EM2820_BOARD_DLINK_USB_TV] = {
332 .name = "D-Link DUB-T210 TV Tuner",
333 .valid = EM28XX_BOARD_NOT_VALIDATED,
334 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
335 .tda9887_conf = TDA9887_PRESENT,
336 .decoder = EM28XX_SAA711X,
337 .input = { {
338 .type = EM28XX_VMUX_TELEVISION,
339 .vmux = SAA7115_COMPOSITE2,
340 .amux = EM28XX_AMUX_LINE_IN,
341 }, {
342 .type = EM28XX_VMUX_COMPOSITE1,
343 .vmux = SAA7115_COMPOSITE0,
344 .amux = EM28XX_AMUX_LINE_IN,
345 }, {
346 .type = EM28XX_VMUX_SVIDEO,
347 .vmux = SAA7115_SVIDEO3,
348 .amux = EM28XX_AMUX_LINE_IN,
349 } },
350 },
351 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
352 .name = "Hercules Smart TV USB 2.0",
353 .valid = EM28XX_BOARD_NOT_VALIDATED,
354 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
355 .tda9887_conf = TDA9887_PRESENT,
356 .decoder = EM28XX_SAA711X,
357 .input = { {
358 .type = EM28XX_VMUX_TELEVISION,
359 .vmux = SAA7115_COMPOSITE2,
360 .amux = EM28XX_AMUX_LINE_IN,
361 }, {
362 .type = EM28XX_VMUX_COMPOSITE1,
363 .vmux = SAA7115_COMPOSITE0,
364 .amux = EM28XX_AMUX_LINE_IN,
365 }, {
366 .type = EM28XX_VMUX_SVIDEO,
367 .vmux = SAA7115_SVIDEO3,
368 .amux = EM28XX_AMUX_LINE_IN,
369 } },
370 },
371 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
372 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
373 .valid = EM28XX_BOARD_NOT_VALIDATED,
374 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
375 .tda9887_conf = TDA9887_PRESENT,
376 .decoder = EM28XX_SAA711X,
377 .input = { {
378 .type = EM28XX_VMUX_TELEVISION,
379 .vmux = SAA7115_COMPOSITE2,
380 .amux = EM28XX_AMUX_VIDEO,
381 }, {
382 .type = EM28XX_VMUX_COMPOSITE1,
383 .vmux = SAA7115_COMPOSITE0,
384 .amux = EM28XX_AMUX_LINE_IN,
385 }, {
386 .type = EM28XX_VMUX_SVIDEO,
387 .vmux = SAA7115_SVIDEO3,
388 .amux = EM28XX_AMUX_LINE_IN,
389 } },
390 },
391 [EM2820_BOARD_GADMEI_UTV310] = {
392 .name = "Gadmei UTV310",
393 .valid = EM28XX_BOARD_NOT_VALIDATED,
394 .tuner_type = TUNER_TNF_5335MF,
395 .tda9887_conf = TDA9887_PRESENT,
396 .decoder = EM28XX_SAA711X,
397 .input = { {
398 .type = EM28XX_VMUX_TELEVISION,
399 .vmux = SAA7115_COMPOSITE1,
400 .amux = EM28XX_AMUX_LINE_IN,
401 }, {
402 .type = EM28XX_VMUX_COMPOSITE1,
403 .vmux = SAA7115_COMPOSITE0,
404 .amux = EM28XX_AMUX_LINE_IN,
405 }, {
406 .type = EM28XX_VMUX_SVIDEO,
407 .vmux = SAA7115_SVIDEO3,
408 .amux = EM28XX_AMUX_LINE_IN,
409 } },
410 },
411 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
412 .name = "Leadtek Winfast USB II Deluxe",
413 .valid = EM28XX_BOARD_NOT_VALIDATED,
414 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
415 .tda9887_conf = TDA9887_PRESENT,
416 .decoder = EM28XX_SAA711X,
417 .input = { {
418 .type = EM28XX_VMUX_TELEVISION,
419 .vmux = SAA7115_COMPOSITE2,
420 .amux = EM28XX_AMUX_VIDEO,
421 }, {
422 .type = EM28XX_VMUX_COMPOSITE1,
423 .vmux = SAA7115_COMPOSITE0,
424 .amux = EM28XX_AMUX_LINE_IN,
425 }, {
426 .type = EM28XX_VMUX_SVIDEO,
427 .vmux = SAA7115_COMPOSITE0,
428 .amux = EM28XX_AMUX_LINE_IN,
429 } },
430 },
431 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
432 .name = "Videology 20K14XUSB USB2.0",
433 .valid = EM28XX_BOARD_NOT_VALIDATED,
434 .tuner_type = TUNER_ABSENT, /* This is a webcam */
435 .input = { {
436 .type = EM28XX_VMUX_COMPOSITE1,
437 .vmux = 0,
438 .amux = EM28XX_AMUX_VIDEO,
439 } },
440 },
441 [EM2821_BOARD_SUPERCOMP_USB_2] = {
442 .name = "Supercomp USB 2.0 TV",
443 .valid = EM28XX_BOARD_NOT_VALIDATED,
444 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
445 .tda9887_conf = TDA9887_PRESENT |
446 TDA9887_PORT1_ACTIVE |
447 TDA9887_PORT2_ACTIVE,
448 .decoder = EM28XX_SAA711X,
449 .input = { {
450 .type = EM28XX_VMUX_TELEVISION,
451 .vmux = SAA7115_COMPOSITE2,
452 .amux = EM28XX_AMUX_LINE_IN,
453 }, {
454 .type = EM28XX_VMUX_COMPOSITE1,
455 .vmux = SAA7115_COMPOSITE0,
456 .amux = EM28XX_AMUX_VIDEO,
457 }, {
458 .type = EM28XX_VMUX_SVIDEO,
459 .vmux = SAA7115_SVIDEO3,
460 .amux = EM28XX_AMUX_LINE_IN,
461 } },
462 },
463 [EM2821_BOARD_USBGEAR_VD204] = {
464 .name = "Usbgear VD204v9",
465 .valid = EM28XX_BOARD_NOT_VALIDATED,
466 .tuner_type = TUNER_ABSENT, /* Capture only device */
467 .decoder = EM28XX_SAA711X,
468 .input = { {
469 .type = EM28XX_VMUX_COMPOSITE1,
470 .vmux = SAA7115_COMPOSITE0,
471 .amux = EM28XX_AMUX_LINE_IN,
472 }, {
473 .type = EM28XX_VMUX_SVIDEO,
474 .vmux = SAA7115_SVIDEO3,
475 .amux = EM28XX_AMUX_LINE_IN,
476 } },
477 },
478 [EM2860_BOARD_NETGMBH_CAM] = {
479 /* Beijing Huaqi Information Digital Technology Co., Ltd */
480 .name = "NetGMBH Cam",
481 .valid = EM28XX_BOARD_NOT_VALIDATED,
482 .tuner_type = TUNER_ABSENT, /* This is a webcam */
483 .input = { {
484 .type = EM28XX_VMUX_COMPOSITE1,
485 .vmux = 0,
486 .amux = EM28XX_AMUX_VIDEO,
487 } },
488 },
489 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
490 .name = "Typhoon DVD Maker",
491 .decoder = EM28XX_SAA711X,
492 .tuner_type = TUNER_ABSENT, /* Capture only device */
493 .input = { {
494 .type = EM28XX_VMUX_COMPOSITE1,
495 .vmux = SAA7115_COMPOSITE0,
496 .amux = EM28XX_AMUX_LINE_IN,
497 }, {
498 .type = EM28XX_VMUX_SVIDEO,
499 .vmux = SAA7115_SVIDEO3,
500 .amux = EM28XX_AMUX_LINE_IN,
501 } },
502 },
503 [EM2860_BOARD_GADMEI_UTV330] = {
504 .name = "Gadmei UTV330",
505 .valid = EM28XX_BOARD_NOT_VALIDATED,
506 .tuner_type = TUNER_TNF_5335MF,
507 .tda9887_conf = TDA9887_PRESENT,
508 .decoder = EM28XX_SAA711X,
509 .input = { {
510 .type = EM28XX_VMUX_TELEVISION,
511 .vmux = SAA7115_COMPOSITE2,
512 .amux = EM28XX_AMUX_VIDEO,
513 }, {
514 .type = EM28XX_VMUX_COMPOSITE1,
515 .vmux = SAA7115_COMPOSITE0,
516 .amux = EM28XX_AMUX_LINE_IN,
517 }, {
518 .type = EM28XX_VMUX_SVIDEO,
519 .vmux = SAA7115_SVIDEO3,
520 .amux = EM28XX_AMUX_LINE_IN,
521 } },
522 },
523 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
524 .name = "Terratec Cinergy A Hybrid XS",
525 .valid = EM28XX_BOARD_NOT_VALIDATED,
526 .tuner_type = TUNER_XC2028,
527 .tuner_gpio = default_tuner_gpio,
528 .decoder = EM28XX_TVP5150,
529
530 .input = { {
531 .type = EM28XX_VMUX_TELEVISION,
532 .vmux = TVP5150_COMPOSITE0,
533 .amux = EM28XX_AMUX_VIDEO,
534 .gpio = hauppauge_wintv_hvr_900_analog,
535 }, {
536 .type = EM28XX_VMUX_COMPOSITE1,
537 .vmux = TVP5150_COMPOSITE1,
538 .amux = EM28XX_AMUX_LINE_IN,
539 .gpio = hauppauge_wintv_hvr_900_analog,
540 }, {
541 .type = EM28XX_VMUX_SVIDEO,
542 .vmux = TVP5150_SVIDEO,
543 .amux = EM28XX_AMUX_LINE_IN,
544 .gpio = hauppauge_wintv_hvr_900_analog,
545 } },
546 },
547 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
548 .name = "KWorld PVRTV 300U",
549 .valid = EM28XX_BOARD_NOT_VALIDATED,
550 .tuner_type = TUNER_XC2028,
551 .tuner_gpio = default_tuner_gpio,
552 .decoder = EM28XX_TVP5150,
553 .input = { {
554 .type = EM28XX_VMUX_TELEVISION,
555 .vmux = TVP5150_COMPOSITE0,
556 .amux = EM28XX_AMUX_VIDEO,
557 }, {
558 .type = EM28XX_VMUX_COMPOSITE1,
559 .vmux = TVP5150_COMPOSITE1,
560 .amux = EM28XX_AMUX_LINE_IN,
561 }, {
562 .type = EM28XX_VMUX_SVIDEO,
563 .vmux = TVP5150_SVIDEO,
564 .amux = EM28XX_AMUX_LINE_IN,
565 } },
566 },
567 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
568 .name = "Yakumo MovieMixer",
569 .tuner_type = TUNER_ABSENT, /* Capture only device */
570 .decoder = EM28XX_TVP5150,
571 .input = { {
572 .type = EM28XX_VMUX_TELEVISION,
573 .vmux = TVP5150_COMPOSITE0,
574 .amux = EM28XX_AMUX_VIDEO,
575 }, {
576 .type = EM28XX_VMUX_COMPOSITE1,
577 .vmux = TVP5150_COMPOSITE1,
578 .amux = EM28XX_AMUX_LINE_IN,
579 }, {
580 .type = EM28XX_VMUX_SVIDEO,
581 .vmux = TVP5150_SVIDEO,
582 .amux = EM28XX_AMUX_LINE_IN,
583 } },
584 },
585 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
586 .name = "Plextor ConvertX PX-TV100U",
587 .valid = EM28XX_BOARD_NOT_VALIDATED,
588 .tuner_type = TUNER_TNF_5335MF,
589 .tda9887_conf = TDA9887_PRESENT,
590 .decoder = EM28XX_TVP5150,
591 .input = { {
592 .type = EM28XX_VMUX_TELEVISION,
593 .vmux = TVP5150_COMPOSITE0,
594 .amux = EM28XX_AMUX_LINE_IN,
595 }, {
596 .type = EM28XX_VMUX_COMPOSITE1,
597 .vmux = TVP5150_COMPOSITE1,
598 .amux = EM28XX_AMUX_LINE_IN,
599 }, {
600 .type = EM28XX_VMUX_SVIDEO,
601 .vmux = TVP5150_SVIDEO,
602 .amux = EM28XX_AMUX_LINE_IN,
603 } },
604 },
605
606 /* Those boards with em2870 are DVB Only*/
607
608 [EM2870_BOARD_TERRATEC_XS] = {
609 .name = "Terratec Cinergy T XS",
610 .valid = EM28XX_BOARD_NOT_VALIDATED,
611 .tuner_type = TUNER_XC2028,
612 .tuner_gpio = default_tuner_gpio,
613 },
614 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
615 .name = "Terratec Cinergy T XS (MT2060)",
616 .valid = EM28XX_BOARD_NOT_VALIDATED,
617 .tuner_type = TUNER_ABSENT, /* MT2060 */
618 },
619 [EM2870_BOARD_KWORLD_350U] = {
620 .name = "Kworld 350 U DVB-T",
621 .valid = EM28XX_BOARD_NOT_VALIDATED,
622 .tuner_type = TUNER_XC2028,
623 .tuner_gpio = default_tuner_gpio,
624 },
625 [EM2870_BOARD_KWORLD_355U] = {
626 .name = "Kworld 355 U DVB-T",
627 .valid = EM28XX_BOARD_NOT_VALIDATED,
628 },
629 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
630 .name = "Pinnacle PCTV DVB-T",
631 .valid = EM28XX_BOARD_NOT_VALIDATED,
632 .tuner_type = TUNER_ABSENT, /* MT2060 */
633 /* djh - I have serious doubts this is right... */
634 .xclk = EM28XX_XCLK_IR_RC5_MODE |
635 EM28XX_XCLK_FREQUENCY_10MHZ,
636 },
637 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
638 .name = "Compro, VideoMate U3",
639 .valid = EM28XX_BOARD_NOT_VALIDATED,
640 .tuner_type = TUNER_ABSENT, /* MT2060 */
641 },
642
643 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
644 .name = "Terratec Hybrid XS Secam",
645 .valid = EM28XX_BOARD_NOT_VALIDATED,
646 .has_msp34xx = 1,
647 .tuner_type = TUNER_XC2028,
648 .tuner_gpio = default_tuner_gpio,
649 .decoder = EM28XX_TVP5150,
650 .input = { {
651 .type = EM28XX_VMUX_TELEVISION,
652 .vmux = TVP5150_COMPOSITE0,
653 .amux = EM28XX_AMUX_VIDEO,
654 .gpio = default_analog,
655 }, {
656 .type = EM28XX_VMUX_COMPOSITE1,
657 .vmux = TVP5150_COMPOSITE1,
658 .amux = EM28XX_AMUX_LINE_IN,
659 .gpio = default_analog,
660 }, {
661 .type = EM28XX_VMUX_SVIDEO,
662 .vmux = TVP5150_SVIDEO,
663 .amux = EM28XX_AMUX_LINE_IN,
664 .gpio = default_analog,
665 } },
666 },
667 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
668 .name = "Hauppauge WinTV HVR 900",
669 .tda9887_conf = TDA9887_PRESENT,
670 .tuner_type = TUNER_XC2028,
671 .tuner_gpio = default_tuner_gpio,
672 .mts_firmware = 1,
673 .has_dvb = 1,
674 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
675 .ir_codes = ir_codes_hauppauge_new,
676 .decoder = EM28XX_TVP5150,
677 .input = { {
678 .type = EM28XX_VMUX_TELEVISION,
679 .vmux = TVP5150_COMPOSITE0,
680 .amux = EM28XX_AMUX_VIDEO,
681 .gpio = hauppauge_wintv_hvr_900_analog,
682 }, {
683 .type = EM28XX_VMUX_COMPOSITE1,
684 .vmux = TVP5150_COMPOSITE1,
685 .amux = EM28XX_AMUX_LINE_IN,
686 .gpio = hauppauge_wintv_hvr_900_analog,
687 }, {
688 .type = EM28XX_VMUX_SVIDEO,
689 .vmux = TVP5150_SVIDEO,
690 .amux = EM28XX_AMUX_LINE_IN,
691 .gpio = hauppauge_wintv_hvr_900_analog,
692 } },
693 },
694 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
695 .name = "Hauppauge WinTV HVR 900 (R2)",
696 .tda9887_conf = TDA9887_PRESENT,
697 .tuner_type = TUNER_XC2028,
698 .tuner_gpio = default_tuner_gpio,
699 .mts_firmware = 1,
700 .ir_codes = ir_codes_hauppauge_new,
701 .decoder = EM28XX_TVP5150,
702 .input = { {
703 .type = EM28XX_VMUX_TELEVISION,
704 .vmux = TVP5150_COMPOSITE0,
705 .amux = EM28XX_AMUX_VIDEO,
706 .gpio = hauppauge_wintv_hvr_900_analog,
707 }, {
708 .type = EM28XX_VMUX_COMPOSITE1,
709 .vmux = TVP5150_COMPOSITE1,
710 .amux = EM28XX_AMUX_LINE_IN,
711 .gpio = hauppauge_wintv_hvr_900_analog,
712 }, {
713 .type = EM28XX_VMUX_SVIDEO,
714 .vmux = TVP5150_SVIDEO,
715 .amux = EM28XX_AMUX_LINE_IN,
716 .gpio = hauppauge_wintv_hvr_900_analog,
717 } },
718 },
719 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
720 .name = "Hauppauge WinTV HVR 850",
721 .tuner_type = TUNER_XC2028,
722 .tuner_gpio = default_tuner_gpio,
723 .mts_firmware = 1,
724 .has_dvb = 1,
725 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
726 .ir_codes = ir_codes_hauppauge_new,
727 .decoder = EM28XX_TVP5150,
728 .input = { {
729 .type = EM28XX_VMUX_TELEVISION,
730 .vmux = TVP5150_COMPOSITE0,
731 .amux = EM28XX_AMUX_VIDEO,
732 .gpio = hauppauge_wintv_hvr_900_analog,
733 }, {
734 .type = EM28XX_VMUX_COMPOSITE1,
735 .vmux = TVP5150_COMPOSITE1,
736 .amux = EM28XX_AMUX_LINE_IN,
737 .gpio = hauppauge_wintv_hvr_900_analog,
738 }, {
739 .type = EM28XX_VMUX_SVIDEO,
740 .vmux = TVP5150_SVIDEO,
741 .amux = EM28XX_AMUX_LINE_IN,
742 .gpio = hauppauge_wintv_hvr_900_analog,
743 } },
744 },
745 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
746 .name = "Hauppauge WinTV HVR 950",
747 .tuner_type = TUNER_XC2028,
748 .tuner_gpio = default_tuner_gpio,
749 .mts_firmware = 1,
750 .has_dvb = 1,
751 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
752 .ir_codes = ir_codes_hauppauge_new,
753 .decoder = EM28XX_TVP5150,
754 .input = { {
755 .type = EM28XX_VMUX_TELEVISION,
756 .vmux = TVP5150_COMPOSITE0,
757 .amux = EM28XX_AMUX_VIDEO,
758 .gpio = hauppauge_wintv_hvr_900_analog,
759 }, {
760 .type = EM28XX_VMUX_COMPOSITE1,
761 .vmux = TVP5150_COMPOSITE1,
762 .amux = EM28XX_AMUX_LINE_IN,
763 .gpio = hauppauge_wintv_hvr_900_analog,
764 }, {
765 .type = EM28XX_VMUX_SVIDEO,
766 .vmux = TVP5150_SVIDEO,
767 .amux = EM28XX_AMUX_LINE_IN,
768 .gpio = hauppauge_wintv_hvr_900_analog,
769 } },
770 },
771 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
772 .name = "Pinnacle PCTV HD Pro Stick",
773 .tuner_type = TUNER_XC2028,
774 .tuner_gpio = default_tuner_gpio,
775 .mts_firmware = 1,
776 .has_dvb = 1,
777 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
778 .ir_codes = ir_codes_pinnacle_pctv_hd,
779 .decoder = EM28XX_TVP5150,
780 .input = { {
781 .type = EM28XX_VMUX_TELEVISION,
782 .vmux = TVP5150_COMPOSITE0,
783 .amux = EM28XX_AMUX_VIDEO,
784 .gpio = hauppauge_wintv_hvr_900_analog,
785 }, {
786 .type = EM28XX_VMUX_COMPOSITE1,
787 .vmux = TVP5150_COMPOSITE1,
788 .amux = EM28XX_AMUX_LINE_IN,
789 .gpio = hauppauge_wintv_hvr_900_analog,
790 }, {
791 .type = EM28XX_VMUX_SVIDEO,
792 .vmux = TVP5150_SVIDEO,
793 .amux = EM28XX_AMUX_LINE_IN,
794 .gpio = hauppauge_wintv_hvr_900_analog,
795 } },
796 },
797 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
798 .name = "AMD ATI TV Wonder HD 600",
799 .tuner_type = TUNER_XC2028,
800 .tuner_gpio = default_tuner_gpio,
801 .mts_firmware = 1,
802 .has_dvb = 1,
803 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
804 .ir_codes = ir_codes_ati_tv_wonder_hd_600,
805 .decoder = EM28XX_TVP5150,
806 .input = { {
807 .type = EM28XX_VMUX_TELEVISION,
808 .vmux = TVP5150_COMPOSITE0,
809 .amux = EM28XX_AMUX_VIDEO,
810 .gpio = hauppauge_wintv_hvr_900_analog,
811 }, {
812 .type = EM28XX_VMUX_COMPOSITE1,
813 .vmux = TVP5150_COMPOSITE1,
814 .amux = EM28XX_AMUX_LINE_IN,
815 .gpio = hauppauge_wintv_hvr_900_analog,
816 }, {
817 .type = EM28XX_VMUX_SVIDEO,
818 .vmux = TVP5150_SVIDEO,
819 .amux = EM28XX_AMUX_LINE_IN,
820 .gpio = hauppauge_wintv_hvr_900_analog,
821 } },
822 },
823 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
824 .name = "Terratec Hybrid XS",
825 .tuner_type = TUNER_XC2028,
826 .tuner_gpio = default_tuner_gpio,
827 .decoder = EM28XX_TVP5150,
828 .has_dvb = 1,
829 .dvb_gpio = default_analog,
830 .input = { {
831 .type = EM28XX_VMUX_TELEVISION,
832 .vmux = TVP5150_COMPOSITE0,
833 .amux = EM28XX_AMUX_VIDEO,
834 .gpio = default_analog,
835 }, {
836 .type = EM28XX_VMUX_COMPOSITE1,
837 .vmux = TVP5150_COMPOSITE1,
838 .amux = EM28XX_AMUX_LINE_IN,
839 .gpio = default_analog,
840 }, {
841 .type = EM28XX_VMUX_SVIDEO,
842 .vmux = TVP5150_SVIDEO,
843 .amux = EM28XX_AMUX_LINE_IN,
844 .gpio = default_analog,
845 } },
846 },
847 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
848 as Prodigy XS with a different PID, let's keep it separated for now
849 maybe we'll need it lateron */
850 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
851 .name = "Terratec Prodigy XS",
852 .tuner_type = TUNER_XC2028,
853 .tuner_gpio = default_tuner_gpio,
854 .decoder = EM28XX_TVP5150,
855 .input = { {
856 .type = EM28XX_VMUX_TELEVISION,
857 .vmux = TVP5150_COMPOSITE0,
858 .amux = EM28XX_AMUX_VIDEO,
859 .gpio = hauppauge_wintv_hvr_900_analog,
860 }, {
861 .type = EM28XX_VMUX_COMPOSITE1,
862 .vmux = TVP5150_COMPOSITE1,
863 .amux = EM28XX_AMUX_LINE_IN,
864 .gpio = hauppauge_wintv_hvr_900_analog,
865 }, {
866 .type = EM28XX_VMUX_SVIDEO,
867 .vmux = TVP5150_SVIDEO,
868 .amux = EM28XX_AMUX_LINE_IN,
869 .gpio = hauppauge_wintv_hvr_900_analog,
870 } },
871 },
872 [EM2820_BOARD_MSI_VOX_USB_2] = {
873 .name = "MSI VOX USB 2.0",
874 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
875 .tda9887_conf = TDA9887_PRESENT |
876 TDA9887_PORT1_ACTIVE |
877 TDA9887_PORT2_ACTIVE,
878 .max_range_640_480 = 1,
879 .decoder = EM28XX_SAA711X,
880 .input = { {
881 .type = EM28XX_VMUX_TELEVISION,
882 .vmux = SAA7115_COMPOSITE4,
883 .amux = EM28XX_AMUX_VIDEO,
884 }, {
885 .type = EM28XX_VMUX_COMPOSITE1,
886 .vmux = SAA7115_COMPOSITE0,
887 .amux = EM28XX_AMUX_LINE_IN,
888 }, {
889 .type = EM28XX_VMUX_SVIDEO,
890 .vmux = SAA7115_SVIDEO3,
891 .amux = EM28XX_AMUX_LINE_IN,
892 } },
893 },
894 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
895 .name = "Terratec Cinergy 200 USB",
896 .is_em2800 = 1,
897 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
898 .tda9887_conf = TDA9887_PRESENT,
899 .decoder = EM28XX_SAA711X,
900 .input = { {
901 .type = EM28XX_VMUX_TELEVISION,
902 .vmux = SAA7115_COMPOSITE2,
903 .amux = EM28XX_AMUX_VIDEO,
904 }, {
905 .type = EM28XX_VMUX_COMPOSITE1,
906 .vmux = SAA7115_COMPOSITE0,
907 .amux = EM28XX_AMUX_LINE_IN,
908 }, {
909 .type = EM28XX_VMUX_SVIDEO,
910 .vmux = SAA7115_SVIDEO3,
911 .amux = EM28XX_AMUX_LINE_IN,
912 } },
913 },
914 [EM2800_BOARD_GRABBEEX_USB2800] = {
915 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
916 .is_em2800 = 1,
917 .decoder = EM28XX_SAA711X,
918 .tuner_type = TUNER_ABSENT, /* capture only board */
919 .input = { {
920 .type = EM28XX_VMUX_COMPOSITE1,
921 .vmux = SAA7115_COMPOSITE0,
922 .amux = EM28XX_AMUX_LINE_IN,
923 }, {
924 .type = EM28XX_VMUX_SVIDEO,
925 .vmux = SAA7115_SVIDEO3,
926 .amux = EM28XX_AMUX_LINE_IN,
927 } },
928 },
929 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
930 .name = "Leadtek Winfast USB II",
931 .is_em2800 = 1,
932 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
933 .tda9887_conf = TDA9887_PRESENT,
934 .decoder = EM28XX_SAA711X,
935 .input = { {
936 .type = EM28XX_VMUX_TELEVISION,
937 .vmux = SAA7115_COMPOSITE2,
938 .amux = EM28XX_AMUX_VIDEO,
939 }, {
940 .type = EM28XX_VMUX_COMPOSITE1,
941 .vmux = SAA7115_COMPOSITE0,
942 .amux = EM28XX_AMUX_LINE_IN,
943 }, {
944 .type = EM28XX_VMUX_SVIDEO,
945 .vmux = SAA7115_SVIDEO3,
946 .amux = EM28XX_AMUX_LINE_IN,
947 } },
948 },
949 [EM2800_BOARD_KWORLD_USB2800] = {
950 .name = "Kworld USB2800",
951 .is_em2800 = 1,
952 .tuner_type = TUNER_PHILIPS_FCV1236D,
953 .tda9887_conf = TDA9887_PRESENT,
954 .decoder = EM28XX_SAA711X,
955 .input = { {
956 .type = EM28XX_VMUX_TELEVISION,
957 .vmux = SAA7115_COMPOSITE2,
958 .amux = EM28XX_AMUX_VIDEO,
959 }, {
960 .type = EM28XX_VMUX_COMPOSITE1,
961 .vmux = SAA7115_COMPOSITE0,
962 .amux = EM28XX_AMUX_LINE_IN,
963 }, {
964 .type = EM28XX_VMUX_SVIDEO,
965 .vmux = SAA7115_SVIDEO3,
966 .amux = EM28XX_AMUX_LINE_IN,
967 } },
968 },
969 [EM2820_BOARD_PINNACLE_DVC_90] = {
970 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker",
971 .tuner_type = TUNER_ABSENT, /* capture only board */
972 .decoder = EM28XX_SAA711X,
973 .input = { {
974 .type = EM28XX_VMUX_COMPOSITE1,
975 .vmux = SAA7115_COMPOSITE0,
976 .amux = EM28XX_AMUX_LINE_IN,
977 }, {
978 .type = EM28XX_VMUX_SVIDEO,
979 .vmux = SAA7115_SVIDEO3,
980 .amux = EM28XX_AMUX_LINE_IN,
981 } },
982 },
983 [EM2800_BOARD_VGEAR_POCKETTV] = {
984 .name = "V-Gear PocketTV",
985 .is_em2800 = 1,
986 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
987 .tda9887_conf = TDA9887_PRESENT,
988 .decoder = EM28XX_SAA711X,
989 .input = { {
990 .type = EM28XX_VMUX_TELEVISION,
991 .vmux = SAA7115_COMPOSITE2,
992 .amux = EM28XX_AMUX_VIDEO,
993 }, {
994 .type = EM28XX_VMUX_COMPOSITE1,
995 .vmux = SAA7115_COMPOSITE0,
996 .amux = EM28XX_AMUX_LINE_IN,
997 }, {
998 .type = EM28XX_VMUX_SVIDEO,
999 .vmux = SAA7115_SVIDEO3,
1000 .amux = EM28XX_AMUX_LINE_IN,
1001 } },
1002 },
1003 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1004 .name = "Pixelview PlayTV Box 4 USB 2.0",
1005 .tda9887_conf = TDA9887_PRESENT,
1006 .tuner_type = TUNER_YMEC_TVF_5533MF,
1007 .decoder = EM28XX_SAA711X,
1008 .input = { {
1009 .type = EM28XX_VMUX_TELEVISION,
1010 .vmux = SAA7115_COMPOSITE2,
1011 .amux = EM28XX_AMUX_VIDEO,
1012 .aout = EM28XX_AOUT_MONO | /* I2S */
1013 EM28XX_AOUT_MASTER, /* Line out pin */
1014 }, {
1015 .type = EM28XX_VMUX_COMPOSITE1,
1016 .vmux = SAA7115_COMPOSITE0,
1017 .amux = EM28XX_AMUX_LINE_IN,
1018 }, {
1019 .type = EM28XX_VMUX_SVIDEO,
1020 .vmux = SAA7115_SVIDEO3,
1021 .amux = EM28XX_AMUX_LINE_IN,
1022 } },
1023 },
1024 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1025 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1026 .has_snapshot_button = 1,
1027 .tda9887_conf = TDA9887_PRESENT,
1028 .tuner_type = TUNER_YMEC_TVF_5533MF,
1029 .decoder = EM28XX_SAA711X,
1030 .input = { {
1031 .type = EM28XX_VMUX_TELEVISION,
1032 .vmux = SAA7115_COMPOSITE2,
1033 .amux = EM28XX_AMUX_VIDEO,
1034 .aout = EM28XX_AOUT_MONO | /* I2S */
1035 EM28XX_AOUT_MASTER, /* Line out pin */
1036 }, {
1037 .type = EM28XX_VMUX_COMPOSITE1,
1038 .vmux = SAA7115_COMPOSITE0,
1039 .amux = EM28XX_AMUX_LINE_IN,
1040 }, {
1041 .type = EM28XX_VMUX_SVIDEO,
1042 .vmux = SAA7115_SVIDEO3,
1043 .amux = EM28XX_AMUX_LINE_IN,
1044 } },
1045 },
1046 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1047 .name = "EM2860/SAA711X Reference Design",
1048 .has_snapshot_button = 1,
1049 .tuner_type = TUNER_ABSENT,
1050 .decoder = EM28XX_SAA711X,
1051 .input = { {
1052 .type = EM28XX_VMUX_SVIDEO,
1053 .vmux = SAA7115_SVIDEO3,
1054 }, {
1055 .type = EM28XX_VMUX_COMPOSITE1,
1056 .vmux = SAA7115_COMPOSITE0,
1057 } },
1058 },
1059 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1060 .name = "MSI DigiVox A/D",
1061 .valid = EM28XX_BOARD_NOT_VALIDATED,
1062 .tuner_type = TUNER_XC2028,
1063 .tuner_gpio = default_tuner_gpio,
1064 .decoder = EM28XX_TVP5150,
1065 .input = { {
1066 .type = EM28XX_VMUX_TELEVISION,
1067 .vmux = TVP5150_COMPOSITE0,
1068 .amux = EM28XX_AMUX_VIDEO,
1069 .gpio = em2880_msi_digivox_ad_analog,
1070 }, {
1071 .type = EM28XX_VMUX_COMPOSITE1,
1072 .vmux = TVP5150_COMPOSITE1,
1073 .amux = EM28XX_AMUX_LINE_IN,
1074 .gpio = em2880_msi_digivox_ad_analog,
1075 }, {
1076 .type = EM28XX_VMUX_SVIDEO,
1077 .vmux = TVP5150_SVIDEO,
1078 .amux = EM28XX_AMUX_LINE_IN,
1079 .gpio = em2880_msi_digivox_ad_analog,
1080 } },
1081 },
1082 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1083 .name = "MSI DigiVox A/D II",
1084 .valid = EM28XX_BOARD_NOT_VALIDATED,
1085 .tuner_type = TUNER_XC2028,
1086 .tuner_gpio = default_tuner_gpio,
1087 .decoder = EM28XX_TVP5150,
1088 .input = { {
1089 .type = EM28XX_VMUX_TELEVISION,
1090 .vmux = TVP5150_COMPOSITE0,
1091 .amux = EM28XX_AMUX_VIDEO,
1092 .gpio = em2880_msi_digivox_ad_analog,
1093 }, {
1094 .type = EM28XX_VMUX_COMPOSITE1,
1095 .vmux = TVP5150_COMPOSITE1,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 .gpio = em2880_msi_digivox_ad_analog,
1098 }, {
1099 .type = EM28XX_VMUX_SVIDEO,
1100 .vmux = TVP5150_SVIDEO,
1101 .amux = EM28XX_AMUX_LINE_IN,
1102 .gpio = em2880_msi_digivox_ad_analog,
1103 } },
1104 },
1105 [EM2880_BOARD_KWORLD_DVB_305U] = {
1106 .name = "KWorld DVB-T 305U",
1107 .valid = EM28XX_BOARD_NOT_VALIDATED,
1108 .tuner_type = TUNER_XC2028,
1109 .tuner_gpio = default_tuner_gpio,
1110 .decoder = EM28XX_TVP5150,
1111 .input = { {
1112 .type = EM28XX_VMUX_TELEVISION,
1113 .vmux = TVP5150_COMPOSITE0,
1114 .amux = EM28XX_AMUX_VIDEO,
1115 }, {
1116 .type = EM28XX_VMUX_COMPOSITE1,
1117 .vmux = TVP5150_COMPOSITE1,
1118 .amux = EM28XX_AMUX_LINE_IN,
1119 }, {
1120 .type = EM28XX_VMUX_SVIDEO,
1121 .vmux = TVP5150_SVIDEO,
1122 .amux = EM28XX_AMUX_LINE_IN,
1123 } },
1124 },
1125 [EM2880_BOARD_KWORLD_DVB_310U] = {
1126 .name = "KWorld DVB-T 310U",
1127 .tuner_type = TUNER_XC2028,
1128 .tuner_gpio = default_tuner_gpio,
1129 .has_dvb = 1,
1130 .dvb_gpio = default_digital,
1131 .mts_firmware = 1,
1132 .decoder = EM28XX_TVP5150,
1133 .input = { {
1134 .type = EM28XX_VMUX_TELEVISION,
1135 .vmux = TVP5150_COMPOSITE0,
1136 .amux = EM28XX_AMUX_VIDEO,
1137 .gpio = default_analog,
1138 }, {
1139 .type = EM28XX_VMUX_COMPOSITE1,
1140 .vmux = TVP5150_COMPOSITE1,
1141 .amux = EM28XX_AMUX_LINE_IN,
1142 .gpio = default_analog,
1143 }, { /* S-video has not been tested yet */
1144 .type = EM28XX_VMUX_SVIDEO,
1145 .vmux = TVP5150_SVIDEO,
1146 .amux = EM28XX_AMUX_LINE_IN,
1147 .gpio = default_analog,
1148 } },
1149 },
1150 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1151 .name = "KWorld ATSC 315U HDTV TV Box",
1152 .valid = EM28XX_BOARD_NOT_VALIDATED,
1153 .tuner_type = TUNER_THOMSON_DTT761X,
1154 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1155 .tda9887_conf = TDA9887_PRESENT,
1156 .decoder = EM28XX_SAA711X,
1157 .has_dvb = 1,
1158 .dvb_gpio = em2882_kworld_315u_digital,
1159 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1160 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1161 /* Analog mode - still not ready */
1162 /*.input = { {
1163 .type = EM28XX_VMUX_TELEVISION,
1164 .vmux = SAA7115_COMPOSITE2,
1165 .amux = EM28XX_AMUX_VIDEO,
1166 .gpio = em2882_kworld_315u_analog,
1167 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1168 }, {
1169 .type = EM28XX_VMUX_COMPOSITE1,
1170 .vmux = SAA7115_COMPOSITE0,
1171 .amux = EM28XX_AMUX_LINE_IN,
1172 .gpio = em2882_kworld_315u_analog1,
1173 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1174 }, {
1175 .type = EM28XX_VMUX_SVIDEO,
1176 .vmux = SAA7115_SVIDEO3,
1177 .amux = EM28XX_AMUX_LINE_IN,
1178 .gpio = em2882_kworld_315u_analog1,
1179 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1180 } }, */
1181 },
1182 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1183 .name = "Empire dual TV",
1184 .tuner_type = TUNER_XC2028,
1185 .tuner_gpio = default_tuner_gpio,
1186 .has_dvb = 1,
1187 .dvb_gpio = default_digital,
1188 .mts_firmware = 1,
1189 .decoder = EM28XX_TVP5150,
1190 .input = { {
1191 .type = EM28XX_VMUX_TELEVISION,
1192 .vmux = TVP5150_COMPOSITE0,
1193 .amux = EM28XX_AMUX_VIDEO,
1194 .gpio = default_analog,
1195 }, {
1196 .type = EM28XX_VMUX_COMPOSITE1,
1197 .vmux = TVP5150_COMPOSITE1,
1198 .amux = EM28XX_AMUX_LINE_IN,
1199 .gpio = default_analog,
1200 }, {
1201 .type = EM28XX_VMUX_SVIDEO,
1202 .vmux = TVP5150_SVIDEO,
1203 .amux = EM28XX_AMUX_LINE_IN,
1204 .gpio = default_analog,
1205 } },
1206 },
1207 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1208 .name = "DNT DA2 Hybrid",
1209 .valid = EM28XX_BOARD_NOT_VALIDATED,
1210 .tuner_type = TUNER_XC2028,
1211 .tuner_gpio = default_tuner_gpio,
1212 .decoder = EM28XX_TVP5150,
1213 .input = { {
1214 .type = EM28XX_VMUX_TELEVISION,
1215 .vmux = TVP5150_COMPOSITE0,
1216 .amux = EM28XX_AMUX_VIDEO,
1217 .gpio = default_analog,
1218 }, {
1219 .type = EM28XX_VMUX_COMPOSITE1,
1220 .vmux = TVP5150_COMPOSITE1,
1221 .amux = EM28XX_AMUX_LINE_IN,
1222 .gpio = default_analog,
1223 }, {
1224 .type = EM28XX_VMUX_SVIDEO,
1225 .vmux = TVP5150_SVIDEO,
1226 .amux = EM28XX_AMUX_LINE_IN,
1227 .gpio = default_analog,
1228 } },
1229 },
1230 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1231 .name = "Pinnacle Hybrid Pro",
1232 .valid = EM28XX_BOARD_NOT_VALIDATED,
1233 .tuner_type = TUNER_XC2028,
1234 .tuner_gpio = default_tuner_gpio,
1235 .decoder = EM28XX_TVP5150,
1236 .input = { {
1237 .type = EM28XX_VMUX_TELEVISION,
1238 .vmux = TVP5150_COMPOSITE0,
1239 .amux = EM28XX_AMUX_VIDEO,
1240 .gpio = default_analog,
1241 }, {
1242 .type = EM28XX_VMUX_COMPOSITE1,
1243 .vmux = TVP5150_COMPOSITE1,
1244 .amux = EM28XX_AMUX_LINE_IN,
1245 .gpio = default_analog,
1246 }, {
1247 .type = EM28XX_VMUX_SVIDEO,
1248 .vmux = TVP5150_SVIDEO,
1249 .amux = EM28XX_AMUX_LINE_IN,
1250 .gpio = default_analog,
1251 } },
1252 },
1253 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1254 .name = "Pinnacle Hybrid Pro (2)",
1255 .valid = EM28XX_BOARD_NOT_VALIDATED,
1256 .tuner_type = TUNER_XC2028,
1257 .tuner_gpio = default_tuner_gpio,
1258 .mts_firmware = 1,
1259 .decoder = EM28XX_TVP5150,
1260 .input = { {
1261 .type = EM28XX_VMUX_TELEVISION,
1262 .vmux = TVP5150_COMPOSITE0,
1263 .amux = EM28XX_AMUX_VIDEO,
1264 .gpio = hauppauge_wintv_hvr_900_analog,
1265 }, {
1266 .type = EM28XX_VMUX_COMPOSITE1,
1267 .vmux = TVP5150_COMPOSITE1,
1268 .amux = EM28XX_AMUX_LINE_IN,
1269 .gpio = hauppauge_wintv_hvr_900_analog,
1270 }, {
1271 .type = EM28XX_VMUX_SVIDEO,
1272 .vmux = TVP5150_SVIDEO,
1273 .amux = EM28XX_AMUX_LINE_IN,
1274 .gpio = hauppauge_wintv_hvr_900_analog,
1275 } },
1276 },
1277 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1278 .name = "Kworld VS-DVB-T 323UR",
1279 .valid = EM28XX_BOARD_NOT_VALIDATED,
1280 .tuner_type = TUNER_XC2028,
1281 .tuner_gpio = default_tuner_gpio,
1282 .decoder = EM28XX_TVP5150,
1283 .input = { {
1284 .type = EM28XX_VMUX_TELEVISION,
1285 .vmux = TVP5150_COMPOSITE0,
1286 .amux = EM28XX_AMUX_VIDEO,
1287 }, {
1288 .type = EM28XX_VMUX_COMPOSITE1,
1289 .vmux = TVP5150_COMPOSITE1,
1290 .amux = EM28XX_AMUX_LINE_IN,
1291 }, {
1292 .type = EM28XX_VMUX_SVIDEO,
1293 .vmux = TVP5150_SVIDEO,
1294 .amux = EM28XX_AMUX_LINE_IN,
1295 } },
1296 },
1297 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1298 .name = "Terratec Hybrid XS (em2882)",
1299 .valid = EM28XX_BOARD_NOT_VALIDATED,
1300 .tuner_type = TUNER_XC2028,
1301 .tuner_gpio = default_tuner_gpio,
1302 .decoder = EM28XX_TVP5150,
1303 .input = { {
1304 .type = EM28XX_VMUX_TELEVISION,
1305 .vmux = TVP5150_COMPOSITE0,
1306 .amux = EM28XX_AMUX_VIDEO,
1307 .gpio = hauppauge_wintv_hvr_900_analog,
1308 }, {
1309 .type = EM28XX_VMUX_COMPOSITE1,
1310 .vmux = TVP5150_COMPOSITE1,
1311 .amux = EM28XX_AMUX_LINE_IN,
1312 .gpio = hauppauge_wintv_hvr_900_analog,
1313 }, {
1314 .type = EM28XX_VMUX_SVIDEO,
1315 .vmux = TVP5150_SVIDEO,
1316 .amux = EM28XX_AMUX_LINE_IN,
1317 .gpio = hauppauge_wintv_hvr_900_analog,
1318 } },
1319 },
1320 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1321 .name = "Kworld PlusTV HD Hybrid 330",
1322 .tuner_type = TUNER_XC2028,
1323 .tuner_gpio = default_tuner_gpio,
1324 .decoder = EM28XX_TVP5150,
1325 .mts_firmware = 1,
1326 .has_dvb = 1,
1327 .dvb_gpio = kworld_330u_digital,
1328 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1329 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1330 EM28XX_I2C_EEPROM_ON_BOARD |
1331 EM28XX_I2C_EEPROM_KEY_VALID,
1332 .input = { {
1333 .type = EM28XX_VMUX_TELEVISION,
1334 .vmux = TVP5150_COMPOSITE0,
1335 .amux = EM28XX_AMUX_VIDEO,
1336 .gpio = kworld_330u_analog,
1337 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1338 }, {
1339 .type = EM28XX_VMUX_COMPOSITE1,
1340 .vmux = TVP5150_COMPOSITE1,
1341 .amux = EM28XX_AMUX_LINE_IN,
1342 .gpio = kworld_330u_analog,
1343 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1344 }, {
1345 .type = EM28XX_VMUX_SVIDEO,
1346 .vmux = TVP5150_SVIDEO,
1347 .amux = EM28XX_AMUX_LINE_IN,
1348 .gpio = kworld_330u_analog,
1349 } },
1350 },
1351 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1352 .name = "Compro VideoMate ForYou/Stereo",
1353 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1354 .tvaudio_addr = 0xb0,
1355 .tda9887_conf = TDA9887_PRESENT,
1356 .decoder = EM28XX_TVP5150,
1357 .adecoder = EM28XX_TVAUDIO,
1358 .mute_gpio = compro_mute_gpio,
1359 .input = { {
1360 .type = EM28XX_VMUX_TELEVISION,
1361 .vmux = TVP5150_COMPOSITE0,
1362 .amux = EM28XX_AMUX_VIDEO,
1363 .gpio = compro_unmute_tv_gpio,
1364 }, {
1365 .type = EM28XX_VMUX_SVIDEO,
1366 .vmux = TVP5150_SVIDEO,
1367 .amux = EM28XX_AMUX_LINE_IN,
1368 .gpio = compro_unmute_svid_gpio,
1369 } },
1370 },
1371 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1372 .name = "Kaiomy TVnPC U2",
1373 .vchannels = 3,
1374 .tuner_type = TUNER_XC2028,
1375 .tuner_addr = 0x61,
1376 .mts_firmware = 1,
1377 .decoder = EM28XX_TVP5150,
1378 .tuner_gpio = default_tuner_gpio,
1379 .ir_codes = ir_codes_kaiomy,
1380 .input = { {
1381 .type = EM28XX_VMUX_TELEVISION,
1382 .vmux = TVP5150_COMPOSITE0,
1383 .amux = EM28XX_AMUX_VIDEO,
1384
1385 }, {
1386 .type = EM28XX_VMUX_COMPOSITE1,
1387 .vmux = TVP5150_COMPOSITE1,
1388 .amux = EM28XX_AMUX_LINE_IN,
1389 }, {
1390 .type = EM28XX_VMUX_SVIDEO,
1391 .vmux = TVP5150_SVIDEO,
1392 .amux = EM28XX_AMUX_LINE_IN,
1393 } },
1394 .radio = {
1395 .type = EM28XX_RADIO,
1396 .amux = EM28XX_AMUX_LINE_IN,
1397 }
1398 },
1399 [EM2860_BOARD_EASYCAP] = {
1400 .name = "Easy Cap Capture DC-60",
1401 .vchannels = 2,
1402 .tuner_type = TUNER_ABSENT,
1403 .decoder = EM28XX_SAA711X,
1404 .input = { {
1405 .type = EM28XX_VMUX_COMPOSITE1,
1406 .vmux = SAA7115_COMPOSITE0,
1407 .amux = EM28XX_AMUX_LINE_IN,
1408 }, {
1409 .type = EM28XX_VMUX_SVIDEO,
1410 .vmux = SAA7115_SVIDEO3,
1411 .amux = EM28XX_AMUX_LINE_IN,
1412 } },
1413 },
1414 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1415 .name = "IO-DATA GV-MVP/SZ",
1416 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1417 .tuner_gpio = default_tuner_gpio,
1418 .tda9887_conf = TDA9887_PRESENT,
1419 .decoder = EM28XX_TVP5150,
1420 .input = { {
1421 .type = EM28XX_VMUX_TELEVISION,
1422 .vmux = TVP5150_COMPOSITE0,
1423 .amux = EM28XX_AMUX_VIDEO,
1424 }, { /* Composite has not been tested yet */
1425 .type = EM28XX_VMUX_COMPOSITE1,
1426 .vmux = TVP5150_COMPOSITE1,
1427 .amux = EM28XX_AMUX_VIDEO,
1428 }, { /* S-video has not been tested yet */
1429 .type = EM28XX_VMUX_SVIDEO,
1430 .vmux = TVP5150_SVIDEO,
1431 .amux = EM28XX_AMUX_VIDEO,
1432 } },
1433 },
1434 [EM2860_BOARD_TERRATEC_GRABBY] = {
1435 .name = "Terratec Grabby",
1436 .vchannels = 2,
1437 .tuner_type = TUNER_ABSENT,
1438 .decoder = EM28XX_SAA711X,
1439 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1440 .input = { {
1441 .type = EM28XX_VMUX_COMPOSITE1,
1442 .vmux = SAA7115_COMPOSITE0,
1443 .amux = EM28XX_AMUX_VIDEO2,
1444 }, {
1445 .type = EM28XX_VMUX_SVIDEO,
1446 .vmux = SAA7115_SVIDEO3,
1447 .amux = EM28XX_AMUX_VIDEO2,
1448 } },
1449 },
1450 [EM2860_BOARD_TERRATEC_AV350] = {
1451 .name = "Terratec AV350",
1452 .vchannels = 2,
1453 .tuner_type = TUNER_ABSENT,
1454 .decoder = EM28XX_TVP5150,
1455 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1456 .mute_gpio = terratec_av350_mute_gpio,
1457 .input = { {
1458 .type = EM28XX_VMUX_COMPOSITE1,
1459 .vmux = TVP5150_COMPOSITE1,
1460 .amux = EM28XX_AUDIO_SRC_LINE,
1461 .gpio = terratec_av350_unmute_gpio,
1462
1463 }, {
1464 .type = EM28XX_VMUX_SVIDEO,
1465 .vmux = TVP5150_SVIDEO,
1466 .amux = EM28XX_AUDIO_SRC_LINE,
1467 .gpio = terratec_av350_unmute_gpio,
1468 } },
1469 },
1470 [EM2882_BOARD_EVGA_INDTUBE] = {
1471 .name = "Evga inDtube",
1472 .tuner_type = TUNER_XC2028,
1473 .tuner_gpio = default_tuner_gpio,
1474 .decoder = EM28XX_TVP5150,
1475 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1476 .mts_firmware = 1,
1477 .has_dvb = 1,
1478 .dvb_gpio = evga_indtube_digital,
1479 .ir_codes = ir_codes_evga_indtube,
1480 .input = { {
1481 .type = EM28XX_VMUX_TELEVISION,
1482 .vmux = TVP5150_COMPOSITE0,
1483 .amux = EM28XX_AMUX_VIDEO,
1484 .gpio = evga_indtube_analog,
1485 }, {
1486 .type = EM28XX_VMUX_COMPOSITE1,
1487 .vmux = TVP5150_COMPOSITE1,
1488 .amux = EM28XX_AMUX_LINE_IN,
1489 .gpio = evga_indtube_analog,
1490 }, {
1491 .type = EM28XX_VMUX_SVIDEO,
1492 .vmux = TVP5150_SVIDEO,
1493 .amux = EM28XX_AMUX_LINE_IN,
1494 .gpio = evga_indtube_analog,
1495 } },
1496 },
1497 };
1498 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1499
1500 /* table of devices that work with this driver */
1501 struct usb_device_id em28xx_id_table[] = {
1502 { USB_DEVICE(0xeb1a, 0x2750),
1503 .driver_info = EM2750_BOARD_UNKNOWN },
1504 { USB_DEVICE(0xeb1a, 0x2751),
1505 .driver_info = EM2750_BOARD_UNKNOWN },
1506 { USB_DEVICE(0xeb1a, 0x2800),
1507 .driver_info = EM2800_BOARD_UNKNOWN },
1508 { USB_DEVICE(0xeb1a, 0x2820),
1509 .driver_info = EM2820_BOARD_UNKNOWN },
1510 { USB_DEVICE(0xeb1a, 0x2821),
1511 .driver_info = EM2820_BOARD_UNKNOWN },
1512 { USB_DEVICE(0xeb1a, 0x2860),
1513 .driver_info = EM2820_BOARD_UNKNOWN },
1514 { USB_DEVICE(0xeb1a, 0x2861),
1515 .driver_info = EM2820_BOARD_UNKNOWN },
1516 { USB_DEVICE(0xeb1a, 0x2870),
1517 .driver_info = EM2820_BOARD_UNKNOWN },
1518 { USB_DEVICE(0xeb1a, 0x2881),
1519 .driver_info = EM2820_BOARD_UNKNOWN },
1520 { USB_DEVICE(0xeb1a, 0x2883),
1521 .driver_info = EM2820_BOARD_UNKNOWN },
1522 { USB_DEVICE(0xeb1a, 0xe300),
1523 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1524 { USB_DEVICE(0xeb1a, 0xe303),
1525 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1526 { USB_DEVICE(0xeb1a, 0xe305),
1527 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1528 { USB_DEVICE(0xeb1a, 0xe310),
1529 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1530 { USB_DEVICE(0xeb1a, 0xa313),
1531 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1532 { USB_DEVICE(0xeb1a, 0xa316),
1533 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1534 { USB_DEVICE(0xeb1a, 0xe320),
1535 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1536 { USB_DEVICE(0xeb1a, 0xe323),
1537 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1538 { USB_DEVICE(0xeb1a, 0xe350),
1539 .driver_info = EM2870_BOARD_KWORLD_350U },
1540 { USB_DEVICE(0xeb1a, 0xe355),
1541 .driver_info = EM2870_BOARD_KWORLD_355U },
1542 { USB_DEVICE(0xeb1a, 0x2801),
1543 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1544 { USB_DEVICE(0xeb1a, 0xe357),
1545 .driver_info = EM2870_BOARD_KWORLD_355U },
1546 { USB_DEVICE(0x1b80, 0xe302),
1547 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1548 { USB_DEVICE(0x0ccd, 0x0036),
1549 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1550 { USB_DEVICE(0x0ccd, 0x004c),
1551 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1552 { USB_DEVICE(0x0ccd, 0x004f),
1553 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1554 { USB_DEVICE(0x0ccd, 0x005e),
1555 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1556 { USB_DEVICE(0x0ccd, 0x0042),
1557 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1558 { USB_DEVICE(0x0ccd, 0x0043),
1559 .driver_info = EM2870_BOARD_TERRATEC_XS },
1560 { USB_DEVICE(0x0ccd, 0x0047),
1561 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1562 { USB_DEVICE(0x0ccd, 0x0084),
1563 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1564 { USB_DEVICE(0x0ccd, 0x0096),
1565 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1566 { USB_DEVICE(0x185b, 0x2870),
1567 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1568 { USB_DEVICE(0x185b, 0x2041),
1569 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1570 { USB_DEVICE(0x2040, 0x4200),
1571 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1572 { USB_DEVICE(0x2040, 0x4201),
1573 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1574 { USB_DEVICE(0x2040, 0x6500),
1575 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1576 { USB_DEVICE(0x2040, 0x6502),
1577 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1578 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1579 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1580 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1581 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1582 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1583 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1584 { USB_DEVICE(0x2040, 0x651f),
1585 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1586 { USB_DEVICE(0x0438, 0xb002),
1587 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1588 { USB_DEVICE(0x2001, 0xf112),
1589 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1590 { USB_DEVICE(0x2304, 0x0207),
1591 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1592 { USB_DEVICE(0x2304, 0x0208),
1593 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1594 { USB_DEVICE(0x2304, 0x021a),
1595 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1596 { USB_DEVICE(0x2304, 0x0226),
1597 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1598 { USB_DEVICE(0x2304, 0x0227),
1599 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1600 { USB_DEVICE(0x0413, 0x6023),
1601 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1602 { USB_DEVICE(0x093b, 0xa005),
1603 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1604 { USB_DEVICE(0x04bb, 0x0515),
1605 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1606 { },
1607 };
1608 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1609
1610 /*
1611 * EEPROM hash table for devices with generic USB IDs
1612 */
1613 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1614 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1615 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1616 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1617 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1618 {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1619 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1620 };
1621
1622 /* I2C devicelist hash table for devices with generic USB IDs */
1623 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1624 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1625 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1626 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1627 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1628 };
1629
1630 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1631 static unsigned short saa711x_addrs[] = {
1632 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1633 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1634 I2C_CLIENT_END };
1635
1636 static unsigned short tvp5150_addrs[] = {
1637 0xb8 >> 1,
1638 0xba >> 1,
1639 I2C_CLIENT_END
1640 };
1641
1642 static unsigned short msp3400_addrs[] = {
1643 0x80 >> 1,
1644 0x88 >> 1,
1645 I2C_CLIENT_END
1646 };
1647
1648 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1649 {
1650 int rc = 0;
1651 struct em28xx *dev = ptr;
1652
1653 if (dev->tuner_type != TUNER_XC2028)
1654 return 0;
1655
1656 if (command != XC2028_TUNER_RESET)
1657 return 0;
1658
1659 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1660
1661 return rc;
1662 }
1663 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1664
1665 static inline void em28xx_set_model(struct em28xx *dev)
1666 {
1667 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1668
1669 /* Those are the default values for the majority of boards
1670 Use those values if not specified otherwise at boards entry
1671 */
1672 if (!dev->board.xclk)
1673 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1674 EM28XX_XCLK_FREQUENCY_12MHZ;
1675
1676 if (!dev->board.i2c_speed)
1677 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1678 EM28XX_I2C_FREQ_100_KHZ;
1679 }
1680
1681 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1682 * this won't work for boards with generic PCI IDs
1683 */
1684 void em28xx_pre_card_setup(struct em28xx *dev)
1685 {
1686 int rc;
1687
1688 em28xx_set_model(dev);
1689
1690 em28xx_info("Identified as %s (card=%d)\n",
1691 dev->board.name, dev->model);
1692
1693 /* Set the default GPO/GPIO for legacy devices */
1694 dev->reg_gpo_num = EM2880_R04_GPO;
1695 dev->reg_gpio_num = EM28XX_R08_GPIO;
1696
1697 dev->wait_after_write = 5;
1698
1699 /* Based on the Chip ID, set the device configuration */
1700 rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1701 if (rc > 0) {
1702 dev->chip_id = rc;
1703
1704 switch (dev->chip_id) {
1705 case CHIP_ID_EM2750:
1706 em28xx_info("chip ID is em2750\n");
1707 break;
1708 case CHIP_ID_EM2820:
1709 em28xx_info("chip ID is em2820\n");
1710 break;
1711 case CHIP_ID_EM2840:
1712 em28xx_info("chip ID is em2840\n");
1713 break;
1714 case CHIP_ID_EM2860:
1715 em28xx_info("chip ID is em2860\n");
1716 break;
1717 case CHIP_ID_EM2870:
1718 em28xx_info("chip ID is em2870\n");
1719 dev->wait_after_write = 0;
1720 break;
1721 case CHIP_ID_EM2874:
1722 em28xx_info("chip ID is em2874\n");
1723 dev->reg_gpio_num = EM2874_R80_GPIO;
1724 dev->wait_after_write = 0;
1725 break;
1726 case CHIP_ID_EM2883:
1727 em28xx_info("chip ID is em2882/em2883\n");
1728 dev->wait_after_write = 0;
1729 break;
1730 default:
1731 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1732 }
1733 }
1734
1735 /* Prepopulate cached GPO register content */
1736 rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1737 if (rc >= 0)
1738 dev->reg_gpo = rc;
1739
1740 /* Set the initial XCLK and I2C clock values based on the board
1741 definition */
1742 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1743 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1744 msleep(50);
1745
1746 /* request some modules */
1747 switch (dev->model) {
1748 case EM2861_BOARD_PLEXTOR_PX_TV100U:
1749 /* FIXME guess */
1750 /* Turn on analog audio output */
1751 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1752 break;
1753 case EM2861_BOARD_KWORLD_PVRTV_300U:
1754 case EM2880_BOARD_KWORLD_DVB_305U:
1755 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1756 msleep(10);
1757 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1758 msleep(10);
1759 break;
1760 case EM2870_BOARD_COMPRO_VIDEOMATE:
1761 /* TODO: someone can do some cleanup here...
1762 not everything's needed */
1763 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1764 msleep(10);
1765 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1766 msleep(10);
1767 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1768 mdelay(70);
1769 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1770 mdelay(70);
1771 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1772 mdelay(70);
1773 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1774 mdelay(70);
1775 break;
1776 case EM2870_BOARD_TERRATEC_XS_MT2060:
1777 /* this device needs some gpio writes to get the DVB-T
1778 demod work */
1779 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1780 mdelay(70);
1781 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1782 mdelay(70);
1783 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1784 mdelay(70);
1785 break;
1786 case EM2870_BOARD_PINNACLE_PCTV_DVB:
1787 /* this device needs some gpio writes to get the
1788 DVB-T demod work */
1789 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1790 mdelay(70);
1791 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1792 mdelay(70);
1793 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1794 mdelay(70);
1795 break;
1796 case EM2820_BOARD_GADMEI_UTV310:
1797 case EM2820_BOARD_MSI_VOX_USB_2:
1798 /* enables audio for that devices */
1799 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1800 break;
1801
1802 case EM2882_BOARD_KWORLD_ATSC_315U:
1803 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1804 msleep(10);
1805 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1806 msleep(10);
1807 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1808 msleep(10);
1809 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
1810 msleep(10);
1811 break;
1812
1813 case EM2860_BOARD_KAIOMY_TVNPC_U2:
1814 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1815 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1816 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1817 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1818 msleep(10);
1819 em28xx_write_regs(dev, 0x08, "\xff", 1);
1820 msleep(10);
1821 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1822 msleep(10);
1823 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1824
1825 break;
1826 case EM2860_BOARD_EASYCAP:
1827 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1828 break;
1829
1830 case EM2820_BOARD_IODATA_GVMVP_SZ:
1831 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1832 msleep(70);
1833 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
1834 msleep(10);
1835 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1836 msleep(70);
1837 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1838 msleep(70);
1839 break;
1840 }
1841
1842 em28xx_gpio_set(dev, dev->board.tuner_gpio);
1843 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1844
1845 /* Unlock device */
1846 em28xx_set_mode(dev, EM28XX_SUSPEND);
1847 }
1848
1849 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1850 {
1851 memset(ctl, 0, sizeof(*ctl));
1852
1853 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1854 ctl->max_len = 64;
1855 ctl->mts = em28xx_boards[dev->model].mts_firmware;
1856
1857 switch (dev->model) {
1858 case EM2880_BOARD_EMPIRE_DUAL_TV:
1859 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1860 ctl->demod = XC3028_FE_ZARLINK456;
1861 break;
1862 case EM2880_BOARD_TERRATEC_HYBRID_XS:
1863 ctl->demod = XC3028_FE_ZARLINK456;
1864 break;
1865 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1866 /* djh - Not sure which demod we need here */
1867 ctl->demod = XC3028_FE_DEFAULT;
1868 break;
1869 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1870 ctl->demod = XC3028_FE_DEFAULT;
1871 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1872 break;
1873 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1874 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1875 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1876 /* FIXME: Better to specify the needed IF */
1877 ctl->demod = XC3028_FE_DEFAULT;
1878 break;
1879 case EM2883_BOARD_KWORLD_HYBRID_330U:
1880 ctl->demod = XC3028_FE_CHINA;
1881 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1882 break;
1883 case EM2882_BOARD_EVGA_INDTUBE:
1884 ctl->demod = XC3028_FE_CHINA;
1885 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1886 break;
1887 default:
1888 ctl->demod = XC3028_FE_OREN538;
1889 }
1890 }
1891
1892 static void em28xx_tuner_setup(struct em28xx *dev)
1893 {
1894 struct tuner_setup tun_setup;
1895 struct v4l2_frequency f;
1896
1897 if (dev->tuner_type == TUNER_ABSENT)
1898 return;
1899
1900 memset(&tun_setup, 0, sizeof(tun_setup));
1901
1902 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1903 tun_setup.tuner_callback = em28xx_tuner_callback;
1904
1905 if (dev->board.radio.type) {
1906 tun_setup.type = dev->board.radio.type;
1907 tun_setup.addr = dev->board.radio_addr;
1908
1909 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1910 }
1911
1912 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
1913 tun_setup.type = dev->tuner_type;
1914 tun_setup.addr = dev->tuner_addr;
1915
1916 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1917 }
1918
1919 if (dev->tda9887_conf) {
1920 struct v4l2_priv_tun_config tda9887_cfg;
1921
1922 tda9887_cfg.tuner = TUNER_TDA9887;
1923 tda9887_cfg.priv = &dev->tda9887_conf;
1924
1925 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
1926 }
1927
1928 if (dev->tuner_type == TUNER_XC2028) {
1929 struct v4l2_priv_tun_config xc2028_cfg;
1930 struct xc2028_ctrl ctl;
1931
1932 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
1933 memset(&ctl, 0, sizeof(ctl));
1934
1935 em28xx_setup_xc3028(dev, &ctl);
1936
1937 xc2028_cfg.tuner = TUNER_XC2028;
1938 xc2028_cfg.priv = &ctl;
1939
1940 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
1941 }
1942
1943 /* configure tuner */
1944 f.tuner = 0;
1945 f.type = V4L2_TUNER_ANALOG_TV;
1946 f.frequency = 9076; /* just a magic number */
1947 dev->ctl_freq = f.frequency;
1948 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1949 }
1950
1951 static int em28xx_hint_board(struct em28xx *dev)
1952 {
1953 int i;
1954
1955 /* HINT method: EEPROM
1956 *
1957 * This method works only for boards with eeprom.
1958 * Uses a hash of all eeprom bytes. The hash should be
1959 * unique for a vendor/tuner pair.
1960 * There are a high chance that tuners for different
1961 * video standards produce different hashes.
1962 */
1963 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1964 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1965 dev->model = em28xx_eeprom_hash[i].model;
1966 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1967
1968 em28xx_errdev("Your board has no unique USB ID.\n");
1969 em28xx_errdev("A hint were successfully done, "
1970 "based on eeprom hash.\n");
1971 em28xx_errdev("This method is not 100%% failproof.\n");
1972 em28xx_errdev("If the board were missdetected, "
1973 "please email this log to:\n");
1974 em28xx_errdev("\tV4L Mailing List "
1975 " <linux-media@vger.kernel.org>\n");
1976 em28xx_errdev("Board detected as %s\n",
1977 em28xx_boards[dev->model].name);
1978
1979 return 0;
1980 }
1981 }
1982
1983 /* HINT method: I2C attached devices
1984 *
1985 * This method works for all boards.
1986 * Uses a hash of i2c scanned devices.
1987 * Devices with the same i2c attached chips will
1988 * be considered equal.
1989 * This method is less precise than the eeprom one.
1990 */
1991
1992 /* user did not request i2c scanning => do it now */
1993 if (!dev->i2c_hash)
1994 em28xx_do_i2c_scan(dev);
1995
1996 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1997 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1998 dev->model = em28xx_i2c_hash[i].model;
1999 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2000 em28xx_errdev("Your board has no unique USB ID.\n");
2001 em28xx_errdev("A hint were successfully done, "
2002 "based on i2c devicelist hash.\n");
2003 em28xx_errdev("This method is not 100%% failproof.\n");
2004 em28xx_errdev("If the board were missdetected, "
2005 "please email this log to:\n");
2006 em28xx_errdev("\tV4L Mailing List "
2007 " <linux-media@vger.kernel.org>\n");
2008 em28xx_errdev("Board detected as %s\n",
2009 em28xx_boards[dev->model].name);
2010
2011 return 0;
2012 }
2013 }
2014
2015 em28xx_errdev("Your board has no unique USB ID and thus need a "
2016 "hint to be detected.\n");
2017 em28xx_errdev("You may try to use card=<n> insmod option to "
2018 "workaround that.\n");
2019 em28xx_errdev("Please send an email with this log to:\n");
2020 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2021 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2022 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2023
2024 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2025 " insmod option:\n");
2026 for (i = 0; i < em28xx_bcount; i++) {
2027 em28xx_errdev(" card=%d -> %s\n",
2028 i, em28xx_boards[i].name);
2029 }
2030 return -1;
2031 }
2032
2033 /* ----------------------------------------------------------------------- */
2034 void em28xx_register_i2c_ir(struct em28xx *dev)
2035 {
2036 struct i2c_board_info info;
2037 struct IR_i2c_init_data init_data;
2038 const unsigned short addr_list[] = {
2039 0x30, 0x47, I2C_CLIENT_END
2040 };
2041
2042 if (disable_ir)
2043 return;
2044
2045 memset(&info, 0, sizeof(struct i2c_board_info));
2046 memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
2047 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2048
2049 /* detect & configure */
2050 switch (dev->model) {
2051 case (EM2800_BOARD_UNKNOWN):
2052 break;
2053 case (EM2820_BOARD_UNKNOWN):
2054 break;
2055 case (EM2800_BOARD_TERRATEC_CINERGY_200):
2056 case (EM2820_BOARD_TERRATEC_CINERGY_250):
2057 init_data.ir_codes = ir_codes_em_terratec;
2058 init_data.get_key = em28xx_get_key_terratec;
2059 init_data.name = "i2c IR (EM28XX Terratec)";
2060 break;
2061 case (EM2820_BOARD_PINNACLE_USB_2):
2062 init_data.ir_codes = ir_codes_pinnacle_grey;
2063 init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2064 init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2065 break;
2066 case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
2067 init_data.ir_codes = ir_codes_hauppauge_new;
2068 init_data.get_key = em28xx_get_key_em_haup;
2069 init_data.name = "i2c IR (EM2840 Hauppauge)";
2070 break;
2071 case (EM2820_BOARD_MSI_VOX_USB_2):
2072 break;
2073 case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
2074 break;
2075 case (EM2800_BOARD_KWORLD_USB2800):
2076 break;
2077 case (EM2800_BOARD_GRABBEEX_USB2800):
2078 break;
2079 }
2080
2081 if (init_data.name)
2082 info.platform_data = &init_data;
2083 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
2084 }
2085
2086 void em28xx_card_setup(struct em28xx *dev)
2087 {
2088 em28xx_set_model(dev);
2089
2090 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2091 if (em28xx_boards[dev->model].tuner_addr)
2092 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2093
2094 if (em28xx_boards[dev->model].tda9887_conf)
2095 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2096
2097 /* request some modules */
2098 switch (dev->model) {
2099 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2100 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2101 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2102 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2103 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2104 {
2105 struct tveeprom tv;
2106 #ifdef CONFIG_MODULES
2107 request_module("tveeprom");
2108 #endif
2109 /* Call first TVeeprom */
2110
2111 dev->i2c_client.addr = 0xa0 >> 1;
2112 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2113
2114 dev->tuner_type = tv.tuner_type;
2115
2116 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2117 dev->i2s_speed = 2048000;
2118 dev->board.has_msp34xx = 1;
2119 }
2120 #ifdef CONFIG_MODULES
2121 if (tv.has_ir)
2122 request_module("ir-kbd-i2c");
2123 #endif
2124 break;
2125 }
2126 case EM2882_BOARD_KWORLD_ATSC_315U:
2127 em28xx_write_reg(dev, 0x0d, 0x42);
2128 msleep(10);
2129 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2130 msleep(10);
2131 break;
2132 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2133 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2134 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2135 break;
2136 case EM2820_BOARD_UNKNOWN:
2137 case EM2800_BOARD_UNKNOWN:
2138 /*
2139 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2140 *
2141 * This occurs because they share identical USB vendor and
2142 * product IDs.
2143 *
2144 * What we do here is look up the EEPROM hash of the K-WORLD
2145 * and if it is found then we decide that we do not have
2146 * a DIGIVOX and reset the device to the K-WORLD instead.
2147 *
2148 * This solution is only valid if they do not share eeprom
2149 * hash identities which has not been determined as yet.
2150 */
2151 case EM2880_BOARD_MSI_DIGIVOX_AD:
2152 if (!em28xx_hint_board(dev))
2153 em28xx_set_model(dev);
2154
2155 /* In cases where we had to use a board hint, the call to
2156 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2157 so make the call now so the analog GPIOs are set properly
2158 before probing the i2c bus. */
2159 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2160 break;
2161 }
2162
2163 if (dev->board.has_snapshot_button)
2164 em28xx_register_snapshot_button(dev);
2165
2166 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2167 em28xx_errdev("\n\n");
2168 em28xx_errdev("The support for this board weren't "
2169 "valid yet.\n");
2170 em28xx_errdev("Please send a report of having this working\n");
2171 em28xx_errdev("not to V4L mailing list (and/or to other "
2172 "addresses)\n\n");
2173 }
2174
2175 /* Allow override tuner type by a module parameter */
2176 if (tuner >= 0)
2177 dev->tuner_type = tuner;
2178
2179 /* request some modules */
2180 if (dev->board.has_msp34xx)
2181 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2182 "msp3400", "msp3400", msp3400_addrs);
2183
2184 if (dev->board.decoder == EM28XX_SAA711X)
2185 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2186 "saa7115", "saa7115_auto", saa711x_addrs);
2187
2188 if (dev->board.decoder == EM28XX_TVP5150)
2189 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2190 "tvp5150", "tvp5150", tvp5150_addrs);
2191
2192 if (dev->board.adecoder == EM28XX_TVAUDIO)
2193 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2194 "tvaudio", "tvaudio", dev->board.tvaudio_addr);
2195
2196 if (dev->board.tuner_type != TUNER_ABSENT) {
2197 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2198
2199 if (dev->board.radio.type)
2200 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2201 "tuner", "tuner", dev->board.radio_addr);
2202
2203 if (has_demod)
2204 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2205 &dev->i2c_adap, "tuner", "tuner",
2206 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2207 if (dev->tuner_addr == 0) {
2208 enum v4l2_i2c_tuner_type type =
2209 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2210 struct v4l2_subdev *sd;
2211
2212 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2213 &dev->i2c_adap, "tuner", "tuner",
2214 v4l2_i2c_tuner_addrs(type));
2215
2216 if (sd)
2217 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2218 } else {
2219 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2220 "tuner", "tuner", dev->tuner_addr);
2221 }
2222 }
2223
2224 em28xx_tuner_setup(dev);
2225 em28xx_ir_init(dev);
2226 }
2227
2228
2229 #if defined(CONFIG_MODULES) && defined(MODULE)
2230 static void request_module_async(struct work_struct *work)
2231 {
2232 struct em28xx *dev = container_of(work,
2233 struct em28xx, request_module_wk);
2234
2235 if (dev->has_audio_class)
2236 request_module("snd-usb-audio");
2237 else if (dev->has_alsa_audio)
2238 request_module("em28xx-alsa");
2239
2240 if (dev->board.has_dvb)
2241 request_module("em28xx-dvb");
2242 }
2243
2244 static void request_modules(struct em28xx *dev)
2245 {
2246 INIT_WORK(&dev->request_module_wk, request_module_async);
2247 schedule_work(&dev->request_module_wk);
2248 }
2249 #else
2250 #define request_modules(dev)
2251 #endif /* CONFIG_MODULES */
2252
2253 /*
2254 * em28xx_realease_resources()
2255 * unregisters the v4l2,i2c and usb devices
2256 * called when the device gets disconected or at module unload
2257 */
2258 void em28xx_release_resources(struct em28xx *dev)
2259 {
2260 if (dev->sbutton_input_dev)
2261 em28xx_deregister_snapshot_button(dev);
2262
2263 if (dev->ir)
2264 em28xx_ir_fini(dev);
2265
2266 /*FIXME: I2C IR should be disconnected */
2267
2268 em28xx_release_analog_resources(dev);
2269
2270 em28xx_remove_from_devlist(dev);
2271
2272 em28xx_i2c_unregister(dev);
2273
2274 v4l2_device_unregister(&dev->v4l2_dev);
2275
2276 usb_put_dev(dev->udev);
2277
2278 /* Mark device as unused */
2279 em28xx_devused &= ~(1 << dev->devno);
2280 };
2281
2282 /*
2283 * em28xx_init_dev()
2284 * allocates and inits the device structs, registers i2c bus and v4l device
2285 */
2286 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2287 struct usb_interface *interface,
2288 int minor)
2289 {
2290 struct em28xx *dev = *devhandle;
2291 int retval = -ENOMEM;
2292 int errCode;
2293
2294 dev->udev = udev;
2295 mutex_init(&dev->ctrl_urb_lock);
2296 spin_lock_init(&dev->slock);
2297 init_waitqueue_head(&dev->open);
2298 init_waitqueue_head(&dev->wait_frame);
2299 init_waitqueue_head(&dev->wait_stream);
2300
2301 dev->em28xx_write_regs = em28xx_write_regs;
2302 dev->em28xx_read_reg = em28xx_read_reg;
2303 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2304 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2305 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2306 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2307
2308 em28xx_pre_card_setup(dev);
2309
2310 if (!dev->board.is_em2800) {
2311 /* Sets I2C speed to 100 KHz */
2312 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2313 if (retval < 0) {
2314 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2315 " retval [%d]\n",
2316 __func__, retval);
2317 return retval;
2318 }
2319 }
2320
2321 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2322 if (retval < 0) {
2323 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2324 return retval;
2325 }
2326
2327 /* register i2c bus */
2328 errCode = em28xx_i2c_register(dev);
2329 if (errCode < 0) {
2330 v4l2_device_unregister(&dev->v4l2_dev);
2331 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2332 __func__, errCode);
2333 return errCode;
2334 }
2335
2336 /* Do board specific init and eeprom reading */
2337 em28xx_card_setup(dev);
2338
2339 /* Configure audio */
2340 errCode = em28xx_audio_setup(dev);
2341 if (errCode < 0) {
2342 v4l2_device_unregister(&dev->v4l2_dev);
2343 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2344 __func__, errCode);
2345 }
2346
2347 /* wake i2c devices */
2348 em28xx_wake_i2c(dev);
2349
2350 /* init video dma queues */
2351 INIT_LIST_HEAD(&dev->vidq.active);
2352 INIT_LIST_HEAD(&dev->vidq.queued);
2353
2354
2355 if (dev->board.has_msp34xx) {
2356 /* Send a reset to other chips via gpio */
2357 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2358 if (errCode < 0) {
2359 em28xx_errdev("%s: em28xx_write_regs_req - "
2360 "msp34xx(1) failed! errCode [%d]\n",
2361 __func__, errCode);
2362 return errCode;
2363 }
2364 msleep(3);
2365
2366 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2367 if (errCode < 0) {
2368 em28xx_errdev("%s: em28xx_write_regs_req - "
2369 "msp34xx(2) failed! errCode [%d]\n",
2370 __func__, errCode);
2371 return errCode;
2372 }
2373 msleep(3);
2374 }
2375
2376 em28xx_add_into_devlist(dev);
2377
2378 retval = em28xx_register_analog_devices(dev);
2379 if (retval < 0) {
2380 em28xx_release_resources(dev);
2381 goto fail_reg_devices;
2382 }
2383
2384 em28xx_init_extension(dev);
2385
2386 /* Save some power by putting tuner to sleep */
2387 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2388
2389 return 0;
2390
2391 fail_reg_devices:
2392 return retval;
2393 }
2394
2395 /*
2396 * em28xx_usb_probe()
2397 * checks for supported devices
2398 */
2399 static int em28xx_usb_probe(struct usb_interface *interface,
2400 const struct usb_device_id *id)
2401 {
2402 const struct usb_endpoint_descriptor *endpoint;
2403 struct usb_device *udev;
2404 struct usb_interface *uif;
2405 struct em28xx *dev = NULL;
2406 int retval;
2407 int i, nr, ifnum, isoc_pipe;
2408 char *speed;
2409 char descr[255] = "";
2410
2411 udev = usb_get_dev(interface_to_usbdev(interface));
2412 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2413
2414 /* Check to see next free device and mark as used */
2415 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2416 em28xx_devused |= 1<<nr;
2417
2418 /* Don't register audio interfaces */
2419 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2420 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2421 "interface %i, class %i\n",
2422 le16_to_cpu(udev->descriptor.idVendor),
2423 le16_to_cpu(udev->descriptor.idProduct),
2424 ifnum,
2425 interface->altsetting[0].desc.bInterfaceClass);
2426
2427 em28xx_devused &= ~(1<<nr);
2428 retval = -ENODEV;
2429 goto err;
2430 }
2431
2432 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2433
2434 /* check if the device has the iso in endpoint at the correct place */
2435 if (usb_endpoint_xfer_isoc(endpoint)
2436 &&
2437 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2438 /* It's a newer em2874/em2875 device */
2439 isoc_pipe = 0;
2440 } else {
2441 int check_interface = 1;
2442 isoc_pipe = 1;
2443 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2444 if (!usb_endpoint_xfer_isoc(endpoint))
2445 check_interface = 0;
2446
2447 if (usb_endpoint_dir_out(endpoint))
2448 check_interface = 0;
2449
2450 if (!check_interface) {
2451 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2452 "interface %i, class %i found.\n",
2453 le16_to_cpu(udev->descriptor.idVendor),
2454 le16_to_cpu(udev->descriptor.idProduct),
2455 ifnum,
2456 interface->altsetting[0].desc.bInterfaceClass);
2457
2458 em28xx_err(DRIVER_NAME " This is an anciliary "
2459 "interface not used by the driver\n");
2460
2461 em28xx_devused &= ~(1<<nr);
2462 retval = -ENODEV;
2463 goto err;
2464 }
2465 }
2466
2467 switch (udev->speed) {
2468 case USB_SPEED_LOW:
2469 speed = "1.5";
2470 break;
2471 case USB_SPEED_UNKNOWN:
2472 case USB_SPEED_FULL:
2473 speed = "12";
2474 break;
2475 case USB_SPEED_HIGH:
2476 speed = "480";
2477 break;
2478 default:
2479 speed = "unknown";
2480 }
2481
2482 if (udev->manufacturer)
2483 strlcpy(descr, udev->manufacturer, sizeof(descr));
2484
2485 if (udev->product) {
2486 if (*descr)
2487 strlcat(descr, " ", sizeof(descr));
2488 strlcat(descr, udev->product, sizeof(descr));
2489 }
2490 if (*descr)
2491 strlcat(descr, " ", sizeof(descr));
2492
2493 printk(DRIVER_NAME ": New device %s@ %s Mbps "
2494 "(%04x:%04x, interface %d, class %d)\n",
2495 descr,
2496 speed,
2497 le16_to_cpu(udev->descriptor.idVendor),
2498 le16_to_cpu(udev->descriptor.idProduct),
2499 ifnum,
2500 interface->altsetting->desc.bInterfaceNumber);
2501
2502 /*
2503 * Make sure we have 480 Mbps of bandwidth, otherwise things like
2504 * video stream wouldn't likely work, since 12 Mbps is generally
2505 * not enough even for most Digital TV streams.
2506 */
2507 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2508 printk(DRIVER_NAME ": Device initialization failed.\n");
2509 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2510 " USB 2.0 port.\n");
2511 em28xx_devused &= ~(1<<nr);
2512 retval = -ENODEV;
2513 goto err;
2514 }
2515
2516 if (nr >= EM28XX_MAXBOARDS) {
2517 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2518 EM28XX_MAXBOARDS);
2519 em28xx_devused &= ~(1<<nr);
2520 retval = -ENOMEM;
2521 goto err;
2522 }
2523
2524 /* allocate memory for our device state and initialize it */
2525 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2526 if (dev == NULL) {
2527 em28xx_err(DRIVER_NAME ": out of memory!\n");
2528 em28xx_devused &= ~(1<<nr);
2529 retval = -ENOMEM;
2530 goto err;
2531 }
2532
2533 snprintf(dev->name, 29, "em28xx #%d", nr);
2534 dev->devno = nr;
2535 dev->model = id->driver_info;
2536 dev->alt = -1;
2537
2538 /* Checks if audio is provided by some interface */
2539 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2540 uif = udev->config->interface[i];
2541 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2542 dev->has_audio_class = 1;
2543 break;
2544 }
2545 }
2546
2547 /* compute alternate max packet sizes */
2548 uif = udev->actconfig->interface[0];
2549
2550 dev->num_alt = uif->num_altsetting;
2551 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2552
2553 if (dev->alt_max_pkt_size == NULL) {
2554 em28xx_errdev("out of memory!\n");
2555 em28xx_devused &= ~(1<<nr);
2556 kfree(dev);
2557 retval = -ENOMEM;
2558 goto err;
2559 }
2560
2561 for (i = 0; i < dev->num_alt ; i++) {
2562 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2563 dev->alt_max_pkt_size[i] =
2564 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2565 }
2566
2567 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2568 dev->model = card[nr];
2569
2570 /* allocate device struct */
2571 mutex_init(&dev->lock);
2572 mutex_lock(&dev->lock);
2573 retval = em28xx_init_dev(&dev, udev, interface, nr);
2574 if (retval) {
2575 em28xx_devused &= ~(1<<dev->devno);
2576 kfree(dev);
2577 goto err;
2578 }
2579
2580 /* save our data pointer in this interface device */
2581 usb_set_intfdata(interface, dev);
2582
2583 request_modules(dev);
2584
2585 /* Should be the last thing to do, to avoid newer udev's to
2586 open the device before fully initializing it
2587 */
2588 mutex_unlock(&dev->lock);
2589
2590 return 0;
2591
2592 err:
2593 return retval;
2594 }
2595
2596 /*
2597 * em28xx_usb_disconnect()
2598 * called when the device gets diconencted
2599 * video device will be unregistered on v4l2_close in case it is still open
2600 */
2601 static void em28xx_usb_disconnect(struct usb_interface *interface)
2602 {
2603 struct em28xx *dev;
2604
2605 dev = usb_get_intfdata(interface);
2606 usb_set_intfdata(interface, NULL);
2607
2608 if (!dev)
2609 return;
2610
2611 em28xx_info("disconnecting %s\n", dev->vdev->name);
2612
2613 /* wait until all current v4l2 io is finished then deallocate
2614 resources */
2615 mutex_lock(&dev->lock);
2616
2617 wake_up_interruptible_all(&dev->open);
2618
2619 v4l2_device_disconnect(&dev->v4l2_dev);
2620
2621 if (dev->users) {
2622 em28xx_warn
2623 ("device /dev/video%d is open! Deregistration and memory "
2624 "deallocation are deferred on close.\n",
2625 dev->vdev->num);
2626
2627 dev->state |= DEV_MISCONFIGURED;
2628 em28xx_uninit_isoc(dev);
2629 dev->state |= DEV_DISCONNECTED;
2630 wake_up_interruptible(&dev->wait_frame);
2631 wake_up_interruptible(&dev->wait_stream);
2632 } else {
2633 dev->state |= DEV_DISCONNECTED;
2634 em28xx_release_resources(dev);
2635 }
2636
2637 em28xx_close_extension(dev);
2638
2639 mutex_unlock(&dev->lock);
2640
2641 if (!dev->users) {
2642 kfree(dev->alt_max_pkt_size);
2643 kfree(dev);
2644 }
2645 }
2646
2647 static struct usb_driver em28xx_usb_driver = {
2648 .name = "em28xx",
2649 .probe = em28xx_usb_probe,
2650 .disconnect = em28xx_usb_disconnect,
2651 .id_table = em28xx_id_table,
2652 };
2653
2654 static int __init em28xx_module_init(void)
2655 {
2656 int result;
2657
2658 /* register this driver with the USB subsystem */
2659 result = usb_register(&em28xx_usb_driver);
2660 if (result)
2661 em28xx_err(DRIVER_NAME
2662 " usb_register failed. Error number %d.\n", result);
2663
2664 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2665
2666 return result;
2667 }
2668
2669 static void __exit em28xx_module_exit(void)
2670 {
2671 /* deregister this driver with the USB subsystem */
2672 usb_deregister(&em28xx_usb_driver);
2673 }
2674
2675 module_init(em28xx_module_init);
2676 module_exit(em28xx_module_exit);
linux-next