arch/arm/mach-at91/pm.h

   1 #ifdef CONFIG_ARCH_AT91RM9200
   2 #include <mach/at91rm9200_mc.h>
   3
   4 /*
   5  * The AT91RM9200 goes into self-refresh mode with this command, and will
   6  * terminate self-refresh automatically on the next SDRAM access.
   7  *
   8  * Self-refresh mode is exited as soon as a memory access is made, but we don't
   9  * know for sure when that happens. However, we need to restore the low-power
  10  * mode if it was enabled before going idle. Restoring low-power mode while
  11  * still in self-refresh is "not recommended", but seems to work.
  12  */
  13
  14 static inline u32 sdram_selfrefresh_enable(void)
  15 {
  16         u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
  17
  18         at91_sys_write(AT91_SDRAMC_LPR, 0);
  19         at91_sys_write(AT91_SDRAMC_SRR, 1);
  20         return saved_lpr;
  21 }
  22
  23 #define sdram_selfrefresh_disable(saved_lpr)    at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
  24 #define wait_for_interrupt_enable()             asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
  25                                                                 : : "r" (0))
  26
  27 #elif defined(CONFIG_ARCH_AT91CAP9)
  28 #include <mach/at91cap9_ddrsdr.h>
  29
  30
  31 static inline u32 sdram_selfrefresh_enable(void)
  32 {
  33         u32 saved_lpr, lpr;
  34
  35         saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
  36
  37         lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
  38         at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
  39         return saved_lpr;
  40 }
  41
  42 #define sdram_selfrefresh_disable(saved_lpr)    at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
  43 #define wait_for_interrupt_enable()             cpu_do_idle()
  44
  45 #elif defined(CONFIG_ARCH_AT91SAM9G45)
  46 #include <mach/at91sam9_ddrsdr.h>
  47
  48 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  49  * remember.
  50  */
  51 static u32 saved_lpr1;
  52
  53 static inline u32 sdram_selfrefresh_enable(void)
  54 {
  55         /* Those tow values allow us to delay self-refresh activation
  56          * to the maximum. */
  57         u32 lpr0, lpr1;
  58         u32 saved_lpr0;
  59
  60         saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
  61         lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
  62         lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
  63
  64         saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
  65         lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
  66         lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
  67
  68         /* self-refresh mode now */
  69         at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
  70         at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
  71
  72         return saved_lpr0;
  73 }
  74
  75 #define sdram_selfrefresh_disable(saved_lpr0)   \
  76         do { \
  77                 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
  78                 at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
  79         } while (0)
  80 #define wait_for_interrupt_enable()             cpu_do_idle()
  81
  82 #else
  83 #include <mach/at91sam9_sdramc.h>
  84
  85 #ifdef CONFIG_ARCH_AT91SAM9263
  86 /*
  87  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  88  * handle those cases both here and in the Suspend-To-RAM support.
  89  */
  90 #warning Assuming EB1 SDRAM controller is *NOT* used
  91 #endif
  92
  93 static inline u32 sdram_selfrefresh_enable(void)
  94 {
  95         u32 saved_lpr, lpr;
  96
  97         saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
  98
  99         lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
 100         at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
 101         return saved_lpr;
 102 }
 103
 104 #define sdram_selfrefresh_disable(saved_lpr)    at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
 105 #define wait_for_interrupt_enable()             cpu_do_idle()
 106
 107 #endif