Merge remote-tracking branch 's5p/for-next'
[linux-2.6/next.git] / arch / arm / mach-ixp23xx / core.c
bloba1bee33d183ea871f72d9ffaef8f4265c3a8b40f
1 /*
2 * arch/arm/mach-ixp23xx/core.c
4 * Core routines for IXP23xx chips
6 * Author: Deepak Saxena <dsaxena@plexity.net>
8 * Copyright 2005 (c) MontaVista Software, Inc.
10 * Based on 2.4 code Copyright 2004 (c) Intel Corporation
12 * This file is licensed under the terms of the GNU General Public
13 * License version 2. This program is licensed "as is" without any
14 * warranty of any kind, whether express or implied.
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/spinlock.h>
20 #include <linux/sched.h>
21 #include <linux/interrupt.h>
22 #include <linux/serial.h>
23 #include <linux/tty.h>
24 #include <linux/bitops.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_core.h>
27 #include <linux/device.h>
28 #include <linux/mm.h>
29 #include <linux/time.h>
30 #include <linux/timex.h>
32 #include <asm/types.h>
33 #include <asm/setup.h>
34 #include <asm/memory.h>
35 #include <mach/hardware.h>
36 #include <asm/irq.h>
37 #include <asm/system.h>
38 #include <asm/tlbflush.h>
39 #include <asm/pgtable.h>
41 #include <asm/mach/map.h>
42 #include <asm/mach/time.h>
43 #include <asm/mach/irq.h>
44 #include <asm/mach/arch.h>
47 /*************************************************************************
48 * Chip specific mappings shared by all IXP23xx systems
49 *************************************************************************/
50 static struct map_desc ixp23xx_io_desc[] __initdata = {
51 { /* XSI-CPP CSRs */
52 .virtual = IXP23XX_XSI2CPP_CSR_VIRT,
53 .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
54 .length = IXP23XX_XSI2CPP_CSR_SIZE,
55 .type = MT_DEVICE,
56 }, { /* Expansion Bus Config */
57 .virtual = IXP23XX_EXP_CFG_VIRT,
58 .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
59 .length = IXP23XX_EXP_CFG_SIZE,
60 .type = MT_DEVICE,
61 }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
62 .virtual = IXP23XX_PERIPHERAL_VIRT,
63 .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
64 .length = IXP23XX_PERIPHERAL_SIZE,
65 .type = MT_DEVICE,
66 }, { /* CAP CSRs */
67 .virtual = IXP23XX_CAP_CSR_VIRT,
68 .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
69 .length = IXP23XX_CAP_CSR_SIZE,
70 .type = MT_DEVICE,
71 }, { /* MSF CSRs */
72 .virtual = IXP23XX_MSF_CSR_VIRT,
73 .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
74 .length = IXP23XX_MSF_CSR_SIZE,
75 .type = MT_DEVICE,
76 }, { /* PCI I/O Space */
77 .virtual = IXP23XX_PCI_IO_VIRT,
78 .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
79 .length = IXP23XX_PCI_IO_SIZE,
80 .type = MT_DEVICE,
81 }, { /* PCI Config Space */
82 .virtual = IXP23XX_PCI_CFG_VIRT,
83 .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
84 .length = IXP23XX_PCI_CFG_SIZE,
85 .type = MT_DEVICE,
86 }, { /* PCI local CFG CSRs */
87 .virtual = IXP23XX_PCI_CREG_VIRT,
88 .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
89 .length = IXP23XX_PCI_CREG_SIZE,
90 .type = MT_DEVICE,
91 }, { /* PCI MEM Space */
92 .virtual = IXP23XX_PCI_MEM_VIRT,
93 .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
94 .length = IXP23XX_PCI_MEM_SIZE,
95 .type = MT_DEVICE,
99 void __init ixp23xx_map_io(void)
101 iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
105 /***************************************************************************
106 * IXP23xx Interrupt Handling
107 ***************************************************************************/
108 enum ixp23xx_irq_type {
109 IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
112 static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
114 static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type)
116 int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
117 u32 int_style;
118 enum ixp23xx_irq_type irq_type;
119 volatile u32 *int_reg;
122 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
124 if (line < 6 || line > 15)
125 return -EINVAL;
127 switch (type) {
128 case IRQ_TYPE_EDGE_BOTH:
129 int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
130 irq_type = IXP23XX_IRQ_EDGE;
131 break;
132 case IRQ_TYPE_EDGE_RISING:
133 int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
134 irq_type = IXP23XX_IRQ_EDGE;
135 break;
136 case IRQ_TYPE_EDGE_FALLING:
137 int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
138 irq_type = IXP23XX_IRQ_EDGE;
139 break;
140 case IRQ_TYPE_LEVEL_HIGH:
141 int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
142 irq_type = IXP23XX_IRQ_LEVEL;
143 break;
144 case IRQ_TYPE_LEVEL_LOW:
145 int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
146 irq_type = IXP23XX_IRQ_LEVEL;
147 break;
148 default:
149 return -EINVAL;
152 ixp23xx_config_irq(d->irq, irq_type);
154 if (line >= 8) { /* pins 8-15 */
155 line -= 8;
156 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
157 } else { /* pins 0-7 */
158 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
162 * Clear pending interrupts
164 *IXP23XX_GPIO_GPISR = (1 << line);
166 /* Clear the style for the appropriate pin */
167 *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
168 (line * IXP23XX_GPIO_STYLE_SIZE));
170 /* Set the new style */
171 *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
173 return 0;
176 static void ixp23xx_irq_mask(struct irq_data *d)
178 volatile unsigned long *intr_reg;
179 unsigned int irq = d->irq;
181 if (irq >= 56)
182 irq += 8;
184 intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
185 *intr_reg &= ~(1 << (irq % 32));
188 static void ixp23xx_irq_ack(struct irq_data *d)
190 int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
192 if ((line < 6) || (line > 15))
193 return;
195 *IXP23XX_GPIO_GPISR = (1 << line);
199 * Level triggered interrupts on GPIO lines can only be cleared when the
200 * interrupt condition disappears.
202 static void ixp23xx_irq_level_unmask(struct irq_data *d)
204 volatile unsigned long *intr_reg;
205 unsigned int irq = d->irq;
207 ixp23xx_irq_ack(d);
209 if (irq >= 56)
210 irq += 8;
212 intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
213 *intr_reg |= (1 << (irq % 32));
216 static void ixp23xx_irq_edge_unmask(struct irq_data *d)
218 volatile unsigned long *intr_reg;
219 unsigned int irq = d->irq;
221 if (irq >= 56)
222 irq += 8;
224 intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
225 *intr_reg |= (1 << (irq % 32));
228 static struct irq_chip ixp23xx_irq_level_chip = {
229 .irq_ack = ixp23xx_irq_mask,
230 .irq_mask = ixp23xx_irq_mask,
231 .irq_unmask = ixp23xx_irq_level_unmask,
232 .irq_set_type = ixp23xx_irq_set_type
235 static struct irq_chip ixp23xx_irq_edge_chip = {
236 .irq_ack = ixp23xx_irq_ack,
237 .irq_mask = ixp23xx_irq_mask,
238 .irq_unmask = ixp23xx_irq_edge_unmask,
239 .irq_set_type = ixp23xx_irq_set_type
242 static void ixp23xx_pci_irq_mask(struct irq_data *d)
244 unsigned int irq = d->irq;
246 *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
249 static void ixp23xx_pci_irq_unmask(struct irq_data *d)
251 unsigned int irq = d->irq;
253 *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
257 * TODO: Should this just be done at ASM level?
259 static void pci_handler(unsigned int irq, struct irq_desc *desc)
261 u32 pci_interrupt;
262 unsigned int irqno;
264 pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
266 desc->irq_data.chip->irq_ack(&desc->irq_data);
268 /* See which PCI_INTA, or PCI_INTB interrupted */
269 if (pci_interrupt & (1 << 26)) {
270 irqno = IRQ_IXP23XX_INTB;
271 } else if (pci_interrupt & (1 << 27)) {
272 irqno = IRQ_IXP23XX_INTA;
273 } else {
274 BUG();
277 generic_handle_irq(irqno);
279 desc->irq_data.chip->irq_unmask(&desc->irq_data);
282 static struct irq_chip ixp23xx_pci_irq_chip = {
283 .irq_ack = ixp23xx_pci_irq_mask,
284 .irq_mask = ixp23xx_pci_irq_mask,
285 .irq_unmask = ixp23xx_pci_irq_unmask
288 static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
290 switch (type) {
291 case IXP23XX_IRQ_LEVEL:
292 irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip,
293 handle_level_irq);
294 break;
295 case IXP23XX_IRQ_EDGE:
296 irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip,
297 handle_edge_irq);
298 break;
300 set_irq_flags(irq, IRQF_VALID);
303 void __init ixp23xx_init_irq(void)
305 int irq;
307 /* Route everything to IRQ */
308 *IXP23XX_INTR_SEL1 = 0x0;
309 *IXP23XX_INTR_SEL2 = 0x0;
310 *IXP23XX_INTR_SEL3 = 0x0;
311 *IXP23XX_INTR_SEL4 = 0x0;
313 /* Mask all sources */
314 *IXP23XX_INTR_EN1 = 0x0;
315 *IXP23XX_INTR_EN2 = 0x0;
316 *IXP23XX_INTR_EN3 = 0x0;
317 *IXP23XX_INTR_EN4 = 0x0;
320 * Configure all IRQs for level-sensitive operation
322 for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
323 ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
326 for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
327 irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip,
328 handle_level_irq);
329 set_irq_flags(irq, IRQF_VALID);
332 irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
336 /*************************************************************************
337 * Timer-tick functions for IXP23xx
338 *************************************************************************/
339 #define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC)
341 static unsigned long next_jiffy_time;
343 static unsigned long
344 ixp23xx_gettimeoffset(void)
346 unsigned long elapsed;
348 elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
350 return elapsed / CLOCK_TICKS_PER_USEC;
353 static irqreturn_t
354 ixp23xx_timer_interrupt(int irq, void *dev_id)
356 /* Clear Pending Interrupt by writing '1' to it */
357 *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
358 while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
359 timer_tick();
360 next_jiffy_time += LATCH;
363 return IRQ_HANDLED;
366 static struct irqaction ixp23xx_timer_irq = {
367 .name = "IXP23xx Timer Tick",
368 .handler = ixp23xx_timer_interrupt,
369 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
372 void __init ixp23xx_init_timer(void)
374 /* Clear Pending Interrupt by writing '1' to it */
375 *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
377 /* Setup the Timer counter value */
378 *IXP23XX_TIMER1_RELOAD =
379 (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
381 *IXP23XX_TIMER_CONT = 0;
382 next_jiffy_time = LATCH;
384 /* Connect the interrupt handler and enable the interrupt */
385 setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
388 struct sys_timer ixp23xx_timer = {
389 .init = ixp23xx_init_timer,
390 .offset = ixp23xx_gettimeoffset,
394 /*************************************************************************
395 * IXP23xx Platform Initialization
396 *************************************************************************/
397 static struct resource ixp23xx_uart_resources[] = {
399 .start = IXP23XX_UART1_PHYS,
400 .end = IXP23XX_UART1_PHYS + 0x0fff,
401 .flags = IORESOURCE_MEM
402 }, {
403 .start = IXP23XX_UART2_PHYS,
404 .end = IXP23XX_UART2_PHYS + 0x0fff,
405 .flags = IORESOURCE_MEM
409 static struct plat_serial8250_port ixp23xx_uart_data[] = {
411 .mapbase = IXP23XX_UART1_PHYS,
412 .membase = (char *)(IXP23XX_UART1_VIRT + 3),
413 .irq = IRQ_IXP23XX_UART1,
414 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
415 .iotype = UPIO_MEM,
416 .regshift = 2,
417 .uartclk = IXP23XX_UART_XTAL,
418 }, {
419 .mapbase = IXP23XX_UART2_PHYS,
420 .membase = (char *)(IXP23XX_UART2_VIRT + 3),
421 .irq = IRQ_IXP23XX_UART2,
422 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
423 .iotype = UPIO_MEM,
424 .regshift = 2,
425 .uartclk = IXP23XX_UART_XTAL,
427 { },
430 static struct platform_device ixp23xx_uart = {
431 .name = "serial8250",
432 .id = 0,
433 .dev.platform_data = ixp23xx_uart_data,
434 .num_resources = 2,
435 .resource = ixp23xx_uart_resources,
438 static struct platform_device *ixp23xx_devices[] __initdata = {
439 &ixp23xx_uart,
442 void __init ixp23xx_sys_init(void)
444 *IXP23XX_EXP_UNIT_FUSE |= 0xf;
445 platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));