2 * GE SBC310 Device Tree Source
4 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
11 * Based on: SBS CM6 Device Tree Source
12 * Copyright 2007 SBS Technologies GmbH & Co. KG
13 * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
14 * Copyright 2006 Freescale Semiconductor Inc.
18 * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
25 compatible = "gef,sbc310";
45 d-cache-line-size = <32>; // 32 bytes
46 i-cache-line-size = <32>; // 32 bytes
47 d-cache-size = <32768>; // L1, 32K
48 i-cache-size = <32768>; // L1, 32K
49 timebase-frequency = <0>; // From uboot
50 bus-frequency = <0>; // From uboot
51 clock-frequency = <0>; // From uboot
56 d-cache-line-size = <32>; // 32 bytes
57 i-cache-line-size = <32>; // 32 bytes
58 d-cache-size = <32768>; // L1, 32K
59 i-cache-size = <32768>; // L1, 32K
60 timebase-frequency = <0>; // From uboot
61 bus-frequency = <0>; // From uboot
62 clock-frequency = <0>; // From uboot
67 device_type = "memory";
68 reg = <0x0 0x40000000>; // set by uboot
74 compatible = "fsl,mpc8641-localbus", "simple-bus";
75 reg = <0xfef05000 0x1000>;
77 interrupt-parent = <&mpic>;
79 ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
80 1 0 0xe0000000 0x08000000 // Paged Flash 0
81 2 0 0xe8000000 0x08000000 // Paged Flash 1
82 3 0 0xfc100000 0x00020000 // NVRAM
83 4 0 0xfc000000 0x00010000>; // FPGA
85 /* flash@0,0 is a mirror of part of the memory in flash@1,0
87 compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
88 reg = <0x0 0x0 0x01000000>;
95 reg = <0x0 0x01000000>;
102 compatible = "gef,sbc310-paged-flash", "cfi-flash";
103 reg = <0x1 0x0 0x8000000>;
106 #address-cells = <1>;
110 reg = <0x0 0x7800000>;
114 reg = <0x7800000 0x800000>;
120 device_type = "nvram";
121 compatible = "simtek,stk14ca8";
122 reg = <0x3 0x0 0x20000>;
126 compatible = "gef,fpga-regs";
127 reg = <0x4 0x0 0x40>;
131 compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
133 reg = <0x4 0x2000 0x8>;
134 interrupts = <0x1a 0x4>;
135 interrupt-parent = <&gef_pic>;
139 compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
141 reg = <0x4 0x2010 0x8>;
142 interrupts = <0x1b 0x4>;
143 interrupt-parent = <&gef_pic>;
146 gef_pic: pic@4,4000 {
147 #interrupt-cells = <1>;
148 interrupt-controller;
149 compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
150 reg = <0x4 0x4000 0x20>;
153 interrupt-parent = <&mpic>;
156 gef_gpio: gpio@4,8000 {
158 compatible = "gef,sbc310-gpio";
159 reg = <0x4 0x8000 0x24>;
165 #address-cells = <1>;
167 #interrupt-cells = <2>;
169 compatible = "fsl,mpc8641-soc", "simple-bus";
170 ranges = <0x0 0xfef00000 0x00100000>;
171 bus-frequency = <33333333>;
174 compatible = "fsl,mcm-law";
180 compatible = "fsl,mpc8641-mcm", "fsl,mcm";
181 reg = <0x1000 0x1000>;
183 interrupt-parent = <&mpic>;
187 #address-cells = <1>;
189 compatible = "fsl-i2c";
190 reg = <0x3000 0x100>;
191 interrupts = <0x2b 0x2>;
192 interrupt-parent = <&mpic>;
196 compatible = "epson,rx8581";
202 #address-cells = <1>;
204 compatible = "fsl-i2c";
205 reg = <0x3100 0x100>;
206 interrupts = <0x2b 0x2>;
207 interrupt-parent = <&mpic>;
211 compatible = "national,lm92";
216 compatible = "adi,adt7461";
221 compatible = "dallas,ds1682";
227 #address-cells = <1>;
229 compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
231 ranges = <0x0 0x21100 0x200>;
234 compatible = "fsl,mpc8641-dma-channel",
235 "fsl,eloplus-dma-channel";
238 interrupt-parent = <&mpic>;
242 compatible = "fsl,mpc8641-dma-channel",
243 "fsl,eloplus-dma-channel";
246 interrupt-parent = <&mpic>;
250 compatible = "fsl,mpc8641-dma-channel",
251 "fsl,eloplus-dma-channel";
254 interrupt-parent = <&mpic>;
258 compatible = "fsl,mpc8641-dma-channel",
259 "fsl,eloplus-dma-channel";
262 interrupt-parent = <&mpic>;
267 enet0: ethernet@24000 {
268 #address-cells = <1>;
270 device_type = "network";
272 compatible = "gianfar";
273 reg = <0x24000 0x1000>;
274 ranges = <0x0 0x24000 0x1000>;
275 local-mac-address = [ 00 00 00 00 00 00 ];
276 interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
277 interrupt-parent = <&mpic>;
278 phy-handle = <&phy0>;
279 phy-connection-type = "gmii";
282 #address-cells = <1>;
284 compatible = "fsl,gianfar-mdio";
287 phy0: ethernet-phy@0 {
288 interrupt-parent = <&gef_pic>;
289 interrupts = <0x9 0x4>;
292 phy2: ethernet-phy@2 {
293 interrupt-parent = <&gef_pic>;
294 interrupts = <0x8 0x4>;
300 enet1: ethernet@26000 {
301 device_type = "network";
303 compatible = "gianfar";
304 reg = <0x26000 0x1000>;
305 local-mac-address = [ 00 00 00 00 00 00 ];
306 interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
307 interrupt-parent = <&mpic>;
308 phy-handle = <&phy2>;
309 phy-connection-type = "gmii";
312 serial0: serial@4500 {
314 device_type = "serial";
315 compatible = "ns16550";
316 reg = <0x4500 0x100>;
317 clock-frequency = <0>;
318 interrupts = <0x2a 0x2>;
319 interrupt-parent = <&mpic>;
322 serial1: serial@4600 {
324 device_type = "serial";
325 compatible = "ns16550";
326 reg = <0x4600 0x100>;
327 clock-frequency = <0>;
328 interrupts = <0x1c 0x2>;
329 interrupt-parent = <&mpic>;
333 clock-frequency = <0>;
334 interrupt-controller;
335 #address-cells = <0>;
336 #interrupt-cells = <2>;
337 reg = <0x40000 0x40000>;
338 compatible = "chrp,open-pic";
339 device_type = "open-pic";
343 compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
344 reg = <0x41600 0x80>;
345 msi-available-ranges = <0 0x100>;
355 interrupt-parent = <&mpic>;
358 global-utilities@e0000 {
359 compatible = "fsl,mpc8641-guts";
360 reg = <0xe0000 0x1000>;
365 pci0: pcie@fef08000 {
366 compatible = "fsl,mpc8641-pcie";
368 #interrupt-cells = <1>;
370 #address-cells = <3>;
371 reg = <0xfef08000 0x1000>;
372 bus-range = <0x0 0xff>;
373 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
374 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
375 clock-frequency = <33333333>;
376 interrupt-parent = <&mpic>;
377 interrupts = <0x18 0x2>;
378 interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
380 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
381 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
382 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
383 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
389 #address-cells = <3>;
391 ranges = <0x02000000 0x0 0x80000000
392 0x02000000 0x0 0x80000000
395 0x01000000 0x0 0x00000000
396 0x01000000 0x0 0x00000000
401 pci1: pcie@fef09000 {
402 compatible = "fsl,mpc8641-pcie";
404 #interrupt-cells = <1>;
406 #address-cells = <3>;
407 reg = <0xfef09000 0x1000>;
408 bus-range = <0x0 0xff>;
409 ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
410 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
411 clock-frequency = <33333333>;
412 interrupt-parent = <&mpic>;
413 interrupts = <0x19 0x2>;
414 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
416 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
417 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
418 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
419 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
425 #address-cells = <3>;
427 ranges = <0x02000000 0x0 0xc0000000
428 0x02000000 0x0 0xc0000000
431 0x01000000 0x0 0x00000000
432 0x01000000 0x0 0x00000000