2 * MPC8360E EMDS Device Tree Source
4 * Copyright 2006 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
14 /memreserve/ 00000000 1000000;
21 compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
40 d-cache-line-size = <32>; // 32 bytes
41 i-cache-line-size = <32>; // 32 bytes
42 d-cache-size = <32768>; // L1, 32K
43 i-cache-size = <32768>; // L1, 32K
44 timebase-frequency = <66000000>;
45 bus-frequency = <264000000>;
46 clock-frequency = <528000000>;
51 device_type = "memory";
52 reg = <0x00000000 0x10000000>;
58 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
60 reg = <0xe0005000 0xd8>;
61 ranges = <0 0 0xfe000000 0x02000000
62 1 0 0xf8000000 0x00008000>;
65 compatible = "cfi-flash";
66 reg = <0 0 0x2000000>;
74 compatible = "fsl,mpc8360mds-bcsr";
76 ranges = <0 1 0 0x8000>;
78 bcsr13: gpio-controller@d {
80 compatible = "fsl,mpc8360mds-bcsr-gpio";
91 compatible = "simple-bus";
92 ranges = <0x0 0xe0000000 0x00100000>;
93 reg = <0xe0000000 0x00000200>;
94 bus-frequency = <264000000>;
97 device_type = "watchdog";
98 compatible = "mpc83xx_wdt";
103 compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
104 reg = <0xb00 0x100 0xa00 0x100>;
105 interrupts = <80 0x8>;
106 interrupt-parent = <&ipic>;
110 #address-cells = <1>;
113 compatible = "fsl-i2c";
114 reg = <0x3000 0x100>;
115 interrupts = <14 0x8>;
116 interrupt-parent = <&ipic>;
120 compatible = "dallas,ds1374";
126 #address-cells = <1>;
129 compatible = "fsl-i2c";
130 reg = <0x3100 0x100>;
131 interrupts = <15 0x8>;
132 interrupt-parent = <&ipic>;
136 serial0: serial@4500 {
138 device_type = "serial";
139 compatible = "ns16550";
140 reg = <0x4500 0x100>;
141 clock-frequency = <264000000>;
142 interrupts = <9 0x8>;
143 interrupt-parent = <&ipic>;
146 serial1: serial@4600 {
148 device_type = "serial";
149 compatible = "ns16550";
150 reg = <0x4600 0x100>;
151 clock-frequency = <264000000>;
152 interrupts = <10 0x8>;
153 interrupt-parent = <&ipic>;
157 #address-cells = <1>;
159 compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
161 ranges = <0 0x8100 0x1a8>;
162 interrupt-parent = <&ipic>;
166 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
169 interrupt-parent = <&ipic>;
173 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
176 interrupt-parent = <&ipic>;
180 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
183 interrupt-parent = <&ipic>;
187 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
190 interrupt-parent = <&ipic>;
196 compatible = "fsl,sec2.0";
197 reg = <0x30000 0x10000>;
198 interrupts = <11 0x8>;
199 interrupt-parent = <&ipic>;
200 fsl,num-channels = <4>;
201 fsl,channel-fifo-len = <24>;
202 fsl,exec-units-mask = <0x7e>;
203 fsl,descriptor-types-mask = <0x01010ebf>;
204 sleep = <&pmc 0x03000000>;
208 interrupt-controller;
209 #address-cells = <0>;
210 #interrupt-cells = <2>;
212 device_type = "ipic";
216 #address-cells = <1>;
218 reg = <0x1400 0x100>;
219 ranges = <0 0x1400 0x100>;
220 device_type = "par_io";
223 qe_pio_b: gpio-controller@18 {
225 compatible = "fsl,mpc8360-qe-pario-bank",
226 "fsl,mpc8323-qe-pario-bank";
233 /* port pin dir open_drain assignment has_irq */
234 0 3 1 0 1 0 /* TxD0 */
235 0 4 1 0 1 0 /* TxD1 */
236 0 5 1 0 1 0 /* TxD2 */
237 0 6 1 0 1 0 /* TxD3 */
238 1 6 1 0 3 0 /* TxD4 */
239 1 7 1 0 1 0 /* TxD5 */
240 1 9 1 0 2 0 /* TxD6 */
241 1 10 1 0 2 0 /* TxD7 */
242 0 9 2 0 1 0 /* RxD0 */
243 0 10 2 0 1 0 /* RxD1 */
244 0 11 2 0 1 0 /* RxD2 */
245 0 12 2 0 1 0 /* RxD3 */
246 0 13 2 0 1 0 /* RxD4 */
247 1 1 2 0 2 0 /* RxD5 */
248 1 0 2 0 2 0 /* RxD6 */
249 1 4 2 0 2 0 /* RxD7 */
250 0 7 1 0 1 0 /* TX_EN */
251 0 8 1 0 1 0 /* TX_ER */
252 0 15 2 0 1 0 /* RX_DV */
253 0 16 2 0 1 0 /* RX_ER */
254 0 0 2 0 1 0 /* RX_CLK */
255 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
256 2 8 2 0 1 0>; /* GTX125 - CLK9 */
260 /* port pin dir open_drain assignment has_irq */
261 0 17 1 0 1 0 /* TxD0 */
262 0 18 1 0 1 0 /* TxD1 */
263 0 19 1 0 1 0 /* TxD2 */
264 0 20 1 0 1 0 /* TxD3 */
265 1 2 1 0 1 0 /* TxD4 */
266 1 3 1 0 2 0 /* TxD5 */
267 1 5 1 0 3 0 /* TxD6 */
268 1 8 1 0 3 0 /* TxD7 */
269 0 23 2 0 1 0 /* RxD0 */
270 0 24 2 0 1 0 /* RxD1 */
271 0 25 2 0 1 0 /* RxD2 */
272 0 26 2 0 1 0 /* RxD3 */
273 0 27 2 0 1 0 /* RxD4 */
274 1 12 2 0 2 0 /* RxD5 */
275 1 13 2 0 3 0 /* RxD6 */
276 1 11 2 0 2 0 /* RxD7 */
277 0 21 1 0 1 0 /* TX_EN */
278 0 22 1 0 1 0 /* TX_ER */
279 0 29 2 0 1 0 /* RX_DV */
280 0 30 2 0 1 0 /* RX_ER */
281 0 31 2 0 1 0 /* RX_CLK */
282 2 2 1 0 2 0 /* GTX_CLK - CLK10 */
283 2 3 2 0 1 0 /* GTX125 - CLK4 */
284 0 1 3 0 2 0 /* MDIO */
285 0 2 1 0 1 0>; /* MDC */
292 #address-cells = <1>;
295 compatible = "fsl,qe";
296 ranges = <0x0 0xe0100000 0x00100000>;
297 reg = <0xe0100000 0x480>;
299 bus-frequency = <396000000>;
300 fsl,qe-num-riscs = <2>;
301 fsl,qe-num-snums = <28>;
304 #address-cells = <1>;
306 compatible = "fsl,qe-muram", "fsl,cpm-muram";
307 ranges = <0x0 0x00010000 0x0000c000>;
310 compatible = "fsl,qe-muram-data",
311 "fsl,cpm-muram-data";
317 compatible = "fsl,mpc8360-qe-gtm",
318 "fsl,qe-gtm", "fsl,gtm";
320 clock-frequency = <132000000>;
321 interrupts = <12 13 14 15>;
322 interrupt-parent = <&qeic>;
327 compatible = "fsl,spi";
330 interrupt-parent = <&qeic>;
336 compatible = "fsl,spi";
339 interrupt-parent = <&qeic>;
344 compatible = "fsl,mpc8360-qe-usb",
345 "fsl,mpc8323-qe-usb";
346 reg = <0x6c0 0x40 0x8b00 0x100>;
348 interrupt-parent = <&qeic>;
349 fsl,fullspeed-clock = "clk21";
350 fsl,lowspeed-clock = "brg9";
351 gpios = <&qe_pio_b 2 0 /* USBOE */
352 &qe_pio_b 3 0 /* USBTP */
353 &qe_pio_b 8 0 /* USBTN */
354 &qe_pio_b 9 0 /* USBRP */
355 &qe_pio_b 11 0 /* USBRN */
356 &bcsr13 5 0 /* SPEED */
357 &bcsr13 4 1>; /* POWER */
361 device_type = "network";
362 compatible = "ucc_geth";
364 reg = <0x2000 0x200>;
366 interrupt-parent = <&qeic>;
367 local-mac-address = [ 00 00 00 00 00 00 ];
368 rx-clock-name = "none";
369 tx-clock-name = "clk9";
370 phy-handle = <&phy0>;
371 phy-connection-type = "rgmii-id";
372 pio-handle = <&pio1>;
376 device_type = "network";
377 compatible = "ucc_geth";
379 reg = <0x3000 0x200>;
381 interrupt-parent = <&qeic>;
382 local-mac-address = [ 00 00 00 00 00 00 ];
383 rx-clock-name = "none";
384 tx-clock-name = "clk4";
385 phy-handle = <&phy1>;
386 phy-connection-type = "rgmii-id";
387 pio-handle = <&pio2>;
391 #address-cells = <1>;
394 compatible = "fsl,ucc-mdio";
396 phy0: ethernet-phy@00 {
397 interrupt-parent = <&ipic>;
398 interrupts = <17 0x8>;
400 device_type = "ethernet-phy";
402 phy1: ethernet-phy@01 {
403 interrupt-parent = <&ipic>;
404 interrupts = <18 0x8>;
406 device_type = "ethernet-phy";
410 qeic: interrupt-controller@80 {
411 interrupt-controller;
412 compatible = "fsl,qe-ic";
413 #address-cells = <0>;
414 #interrupt-cells = <1>;
417 interrupts = <32 0x8 33 0x8>; // high:32 low:33
418 interrupt-parent = <&ipic>;
423 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
426 /* IDSEL 0x11 AD17 */
427 0x8800 0x0 0x0 0x1 &ipic 20 0x8
428 0x8800 0x0 0x0 0x2 &ipic 21 0x8
429 0x8800 0x0 0x0 0x3 &ipic 22 0x8
430 0x8800 0x0 0x0 0x4 &ipic 23 0x8
432 /* IDSEL 0x12 AD18 */
433 0x9000 0x0 0x0 0x1 &ipic 22 0x8
434 0x9000 0x0 0x0 0x2 &ipic 23 0x8
435 0x9000 0x0 0x0 0x3 &ipic 20 0x8
436 0x9000 0x0 0x0 0x4 &ipic 21 0x8
438 /* IDSEL 0x13 AD19 */
439 0x9800 0x0 0x0 0x1 &ipic 23 0x8
440 0x9800 0x0 0x0 0x2 &ipic 20 0x8
441 0x9800 0x0 0x0 0x3 &ipic 21 0x8
442 0x9800 0x0 0x0 0x4 &ipic 22 0x8
445 0xa800 0x0 0x0 0x1 &ipic 20 0x8
446 0xa800 0x0 0x0 0x2 &ipic 21 0x8
447 0xa800 0x0 0x0 0x3 &ipic 22 0x8
448 0xa800 0x0 0x0 0x4 &ipic 23 0x8
451 0xb000 0x0 0x0 0x1 &ipic 23 0x8
452 0xb000 0x0 0x0 0x2 &ipic 20 0x8
453 0xb000 0x0 0x0 0x3 &ipic 21 0x8
454 0xb000 0x0 0x0 0x4 &ipic 22 0x8
457 0xb800 0x0 0x0 0x1 &ipic 22 0x8
458 0xb800 0x0 0x0 0x2 &ipic 23 0x8
459 0xb800 0x0 0x0 0x3 &ipic 20 0x8
460 0xb800 0x0 0x0 0x4 &ipic 21 0x8
463 0xc000 0x0 0x0 0x1 &ipic 21 0x8
464 0xc000 0x0 0x0 0x2 &ipic 22 0x8
465 0xc000 0x0 0x0 0x3 &ipic 23 0x8
466 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
467 interrupt-parent = <&ipic>;
468 interrupts = <66 0x8>;
470 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
471 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
472 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
473 clock-frequency = <66666666>;
474 #interrupt-cells = <1>;
476 #address-cells = <3>;
477 reg = <0xe0008500 0x100 /* internal registers */
478 0xe0008300 0x8>; /* config space access registers */
479 compatible = "fsl,mpc8349-pci";
481 sleep = <&pmc 0x00010000>;