2 * Aic94xx SAS/SATA driver sequencer interface.
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * Parts of this code adapted from David Chaw's adp94xx_seq.c.
9 * This file is licensed under GPLv2.
11 * This file is part of the aic94xx driver.
13 * The aic94xx driver is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; version 2 of the
18 * The aic94xx driver is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 * General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with the aic94xx driver; if not, write to the Free Software
25 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 #include <linux/delay.h>
30 #include <linux/gfp.h>
31 #include <linux/pci.h>
32 #include <linux/module.h>
33 #include <linux/firmware.h>
34 #include "aic94xx_reg.h"
35 #include "aic94xx_hwi.h"
37 #include "aic94xx_seq.h"
38 #include "aic94xx_dump.h"
40 /* It takes no more than 0.05 us for an instruction
41 * to complete. So waiting for 1 us should be more than
45 #define PAUSE_TRIES 1000
47 static const struct firmware
*sequencer_fw
;
48 static u16 cseq_vecs
[CSEQ_NUM_VECS
], lseq_vecs
[LSEQ_NUM_VECS
], mode2_task
,
49 cseq_idle_loop
, lseq_idle_loop
;
50 static const u8
*cseq_code
, *lseq_code
;
51 static u32 cseq_code_size
, lseq_code_size
;
53 static u16 first_scb_site_no
= 0xFFFF;
54 static u16 last_scb_site_no
;
56 /* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
59 * asd_pause_cseq - pause the central sequencer
60 * @asd_ha: pointer to host adapter structure
62 * Return 0 on success, negative on failure.
64 static int asd_pause_cseq(struct asd_ha_struct
*asd_ha
)
66 int count
= PAUSE_TRIES
;
69 arp2ctl
= asd_read_reg_dword(asd_ha
, CARP2CTL
);
73 asd_write_reg_dword(asd_ha
, CARP2CTL
, arp2ctl
| EPAUSE
);
75 arp2ctl
= asd_read_reg_dword(asd_ha
, CARP2CTL
);
79 } while (--count
> 0);
81 ASD_DPRINTK("couldn't pause CSEQ\n");
86 * asd_unpause_cseq - unpause the central sequencer.
87 * @asd_ha: pointer to host adapter structure.
89 * Return 0 on success, negative on error.
91 static int asd_unpause_cseq(struct asd_ha_struct
*asd_ha
)
94 int count
= PAUSE_TRIES
;
96 arp2ctl
= asd_read_reg_dword(asd_ha
, CARP2CTL
);
97 if (!(arp2ctl
& PAUSED
))
100 asd_write_reg_dword(asd_ha
, CARP2CTL
, arp2ctl
& ~EPAUSE
);
102 arp2ctl
= asd_read_reg_dword(asd_ha
, CARP2CTL
);
103 if (!(arp2ctl
& PAUSED
))
106 } while (--count
> 0);
108 ASD_DPRINTK("couldn't unpause the CSEQ\n");
113 * asd_seq_pause_lseq - pause a link sequencer
114 * @asd_ha: pointer to a host adapter structure
115 * @lseq: link sequencer of interest
117 * Return 0 on success, negative on error.
119 static int asd_seq_pause_lseq(struct asd_ha_struct
*asd_ha
, int lseq
)
122 int count
= PAUSE_TRIES
;
124 arp2ctl
= asd_read_reg_dword(asd_ha
, LmARP2CTL(lseq
));
125 if (arp2ctl
& PAUSED
)
128 asd_write_reg_dword(asd_ha
, LmARP2CTL(lseq
), arp2ctl
| EPAUSE
);
130 arp2ctl
= asd_read_reg_dword(asd_ha
, LmARP2CTL(lseq
));
131 if (arp2ctl
& PAUSED
)
134 } while (--count
> 0);
136 ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq
);
141 * asd_pause_lseq - pause the link sequencer(s)
142 * @asd_ha: pointer to host adapter structure
143 * @lseq_mask: mask of link sequencers of interest
145 * Return 0 on success, negative on failure.
147 static int asd_pause_lseq(struct asd_ha_struct
*asd_ha
, u8 lseq_mask
)
152 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
) {
153 err
= asd_seq_pause_lseq(asd_ha
, lseq
);
162 * asd_seq_unpause_lseq - unpause a link sequencer
163 * @asd_ha: pointer to host adapter structure
164 * @lseq: link sequencer of interest
166 * Return 0 on success, negative on error.
168 static int asd_seq_unpause_lseq(struct asd_ha_struct
*asd_ha
, int lseq
)
171 int count
= PAUSE_TRIES
;
173 arp2ctl
= asd_read_reg_dword(asd_ha
, LmARP2CTL(lseq
));
174 if (!(arp2ctl
& PAUSED
))
177 asd_write_reg_dword(asd_ha
, LmARP2CTL(lseq
), arp2ctl
& ~EPAUSE
);
179 arp2ctl
= asd_read_reg_dword(asd_ha
, LmARP2CTL(lseq
));
180 if (!(arp2ctl
& PAUSED
))
183 } while (--count
> 0);
185 ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq
);
190 /* ---------- Downloading CSEQ/LSEQ microcode ---------- */
192 static int asd_verify_cseq(struct asd_ha_struct
*asd_ha
, const u8
*_prog
,
195 u32 addr
= CSEQ_RAM_REG_BASE_ADR
;
196 const u32
*prog
= (u32
*) _prog
;
199 for (i
= 0; i
< size
; i
+= 4, prog
++, addr
+= 4) {
200 u32 val
= asd_read_reg_dword(asd_ha
, addr
);
202 if (le32_to_cpu(*prog
) != val
) {
203 asd_printk("%s: cseq verify failed at %u "
204 "read:0x%x, wanted:0x%x\n",
205 pci_name(asd_ha
->pcidev
),
206 i
, val
, le32_to_cpu(*prog
));
210 ASD_DPRINTK("verified %d bytes, passed\n", size
);
215 * asd_verify_lseq - verify the microcode of a link sequencer
216 * @asd_ha: pointer to host adapter structure
217 * @_prog: pointer to the microcode
218 * @size: size of the microcode in bytes
219 * @lseq: link sequencer of interest
221 * The link sequencer code is accessed in 4 KB pages, which are selected
222 * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
223 * The 10 KB LSEQm instruction code is mapped, page at a time, at
226 static int asd_verify_lseq(struct asd_ha_struct
*asd_ha
, const u8
*_prog
,
229 #define LSEQ_CODEPAGE_SIZE 4096
230 int pages
= (size
+ LSEQ_CODEPAGE_SIZE
- 1) / LSEQ_CODEPAGE_SIZE
;
232 const u32
*prog
= (u32
*) _prog
;
234 for (page
= 0; page
< pages
; page
++) {
237 asd_write_reg_dword(asd_ha
, LmBISTCTL1(lseq
),
238 page
<< LmRAMPAGE_LSHIFT
);
239 for (i
= 0; size
> 0 && i
< LSEQ_CODEPAGE_SIZE
;
240 i
+= 4, prog
++, size
-=4) {
242 u32 val
= asd_read_reg_dword(asd_ha
, LmSEQRAM(lseq
)+i
);
244 if (le32_to_cpu(*prog
) != val
) {
245 asd_printk("%s: LSEQ%d verify failed "
246 "page:%d, offs:%d\n",
247 pci_name(asd_ha
->pcidev
),
253 ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq
,
254 (int)((u8
*)prog
-_prog
));
259 * asd_verify_seq -- verify CSEQ/LSEQ microcode
260 * @asd_ha: pointer to host adapter structure
261 * @prog: pointer to microcode
262 * @size: size of the microcode
263 * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
265 * Return 0 if microcode is correct, negative on mismatch.
267 static int asd_verify_seq(struct asd_ha_struct
*asd_ha
, const u8
*prog
,
268 u32 size
, u8 lseq_mask
)
271 return asd_verify_cseq(asd_ha
, prog
, size
);
275 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
) {
276 err
= asd_verify_lseq(asd_ha
, prog
, size
, lseq
);
284 #define ASD_DMA_MODE_DOWNLOAD
285 #ifdef ASD_DMA_MODE_DOWNLOAD
286 /* This is the size of the CSEQ Mapped instruction page */
287 #define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
288 static int asd_download_seq(struct asd_ha_struct
*asd_ha
,
289 const u8
* const prog
, u32 size
, u8 lseq_mask
)
294 const int pages
= (size
+ MAX_DMA_OVLY_COUNT
- 1) / MAX_DMA_OVLY_COUNT
;
295 struct asd_dma_tok
*token
;
299 asd_printk("sequencer program not multiple of 4\n");
303 asd_pause_cseq(asd_ha
);
304 asd_pause_lseq(asd_ha
, 0xFF);
306 /* save, disable and clear interrupts */
307 comstaten
= asd_read_reg_dword(asd_ha
, COMSTATEN
);
308 asd_write_reg_dword(asd_ha
, COMSTATEN
, 0);
309 asd_write_reg_dword(asd_ha
, COMSTAT
, COMSTAT_MASK
);
311 asd_write_reg_dword(asd_ha
, CHIMINTEN
, RST_CHIMINTEN
);
312 asd_write_reg_dword(asd_ha
, CHIMINT
, CHIMINT_MASK
);
314 token
= asd_alloc_coherent(asd_ha
, MAX_DMA_OVLY_COUNT
, GFP_KERNEL
);
316 asd_printk("out of memory for dma SEQ download\n");
320 ASD_DPRINTK("dma-ing %d bytes\n", size
);
322 for (page
= 0; page
< pages
; page
++) {
324 u32 left
= min(size
-page
*MAX_DMA_OVLY_COUNT
,
325 (u32
)MAX_DMA_OVLY_COUNT
);
327 memcpy(token
->vaddr
, prog
+ page
*MAX_DMA_OVLY_COUNT
, left
);
328 asd_write_reg_addr(asd_ha
, OVLYDMAADR
, token
->dma_handle
);
329 asd_write_reg_dword(asd_ha
, OVLYDMACNT
, left
);
330 reg
= !page
? RESETOVLYDMA
: 0;
331 reg
|= (STARTOVLYDMA
| OVLYHALTERR
);
332 reg
|= (lseq_mask
? (((u32
)lseq_mask
) << 8) : OVLYCSEQ
);
334 asd_write_reg_dword(asd_ha
, OVLYDMACTL
, reg
);
336 for (i
= PAUSE_TRIES
*100; i
> 0; i
--) {
337 u32 dmadone
= asd_read_reg_dword(asd_ha
, OVLYDMACTL
);
338 if (!(dmadone
& OVLYDMAACT
))
344 reg
= asd_read_reg_dword(asd_ha
, COMSTAT
);
345 if (!(reg
& OVLYDMADONE
) || (reg
& OVLYERR
)
346 || (asd_read_reg_dword(asd_ha
, CHIMINT
) & DEVEXCEPT_MASK
)){
347 asd_printk("%s: error DMA-ing sequencer code\n",
348 pci_name(asd_ha
->pcidev
));
352 asd_free_coherent(asd_ha
, token
);
354 asd_write_reg_dword(asd_ha
, COMSTATEN
, comstaten
);
356 return err
? : asd_verify_seq(asd_ha
, prog
, size
, lseq_mask
);
358 #else /* ASD_DMA_MODE_DOWNLOAD */
359 static int asd_download_seq(struct asd_ha_struct
*asd_ha
, const u8
*_prog
,
360 u32 size
, u8 lseq_mask
)
364 const u32
*prog
= (u32
*) _prog
;
367 asd_printk("sequencer program not multiple of 4\n");
371 asd_pause_cseq(asd_ha
);
372 asd_pause_lseq(asd_ha
, 0xFF);
374 reg
|= (lseq_mask
? (((u32
)lseq_mask
) << 8) : OVLYCSEQ
);
377 asd_write_reg_dword(asd_ha
, OVLYDMACNT
, size
);
378 asd_write_reg_dword(asd_ha
, OVLYDMACTL
, reg
);
380 ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
381 lseq_mask
? "LSEQ" : "CSEQ", lseq_mask
? "s" : "");
383 for (i
= 0; i
< size
; i
+= 4, prog
++)
384 asd_write_reg_dword(asd_ha
, SPIODATA
, *prog
);
386 reg
= (reg
& ~PIOCMODE
) | OVLYHALTERR
;
387 asd_write_reg_dword(asd_ha
, OVLYDMACTL
, reg
);
389 return asd_verify_seq(asd_ha
, _prog
, size
, lseq_mask
);
391 #endif /* ASD_DMA_MODE_DOWNLOAD */
394 * asd_seq_download_seqs - download the sequencer microcode
395 * @asd_ha: pointer to host adapter structure
397 * Download the central and link sequencer microcode.
399 static int asd_seq_download_seqs(struct asd_ha_struct
*asd_ha
)
403 if (!asd_ha
->hw_prof
.enabled_phys
) {
404 asd_printk("%s: no enabled phys!\n", pci_name(asd_ha
->pcidev
));
408 /* Download the CSEQ */
409 ASD_DPRINTK("downloading CSEQ...\n");
410 err
= asd_download_seq(asd_ha
, cseq_code
, cseq_code_size
, 0);
412 asd_printk("CSEQ download failed:%d\n", err
);
416 /* Download the Link Sequencers code. All of the Link Sequencers
417 * microcode can be downloaded at the same time.
419 ASD_DPRINTK("downloading LSEQs...\n");
420 err
= asd_download_seq(asd_ha
, lseq_code
, lseq_code_size
,
421 asd_ha
->hw_prof
.enabled_phys
);
423 /* Try it one at a time */
425 u8 lseq_mask
= asd_ha
->hw_prof
.enabled_phys
;
427 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
) {
428 err
= asd_download_seq(asd_ha
, lseq_code
,
429 lseq_code_size
, 1<<lseq
);
435 asd_printk("LSEQs download failed:%d\n", err
);
440 /* ---------- Initializing the chip, chip memory, etc. ---------- */
443 * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
444 * @asd_ha: pointer to host adapter structure
446 static void asd_init_cseq_mip(struct asd_ha_struct
*asd_ha
)
448 /* CSEQ Mode Independent, page 4 setup. */
449 asd_write_reg_word(asd_ha
, CSEQ_Q_EXE_HEAD
, 0xFFFF);
450 asd_write_reg_word(asd_ha
, CSEQ_Q_EXE_TAIL
, 0xFFFF);
451 asd_write_reg_word(asd_ha
, CSEQ_Q_DONE_HEAD
, 0xFFFF);
452 asd_write_reg_word(asd_ha
, CSEQ_Q_DONE_TAIL
, 0xFFFF);
453 asd_write_reg_word(asd_ha
, CSEQ_Q_SEND_HEAD
, 0xFFFF);
454 asd_write_reg_word(asd_ha
, CSEQ_Q_SEND_TAIL
, 0xFFFF);
455 asd_write_reg_word(asd_ha
, CSEQ_Q_DMA2CHIM_HEAD
, 0xFFFF);
456 asd_write_reg_word(asd_ha
, CSEQ_Q_DMA2CHIM_TAIL
, 0xFFFF);
457 asd_write_reg_word(asd_ha
, CSEQ_Q_COPY_HEAD
, 0xFFFF);
458 asd_write_reg_word(asd_ha
, CSEQ_Q_COPY_TAIL
, 0xFFFF);
459 asd_write_reg_word(asd_ha
, CSEQ_REG0
, 0);
460 asd_write_reg_word(asd_ha
, CSEQ_REG1
, 0);
461 asd_write_reg_dword(asd_ha
, CSEQ_REG2
, 0);
462 asd_write_reg_byte(asd_ha
, CSEQ_LINK_CTL_Q_MAP
, 0);
464 u8 con
= asd_read_reg_byte(asd_ha
, CCONEXIST
);
465 u8 val
= hweight8(con
);
466 asd_write_reg_byte(asd_ha
, CSEQ_MAX_CSEQ_MODE
, (val
<<4)|val
);
468 asd_write_reg_word(asd_ha
, CSEQ_FREE_LIST_HACK_COUNT
, 0);
470 /* CSEQ Mode independent, page 5 setup. */
471 asd_write_reg_dword(asd_ha
, CSEQ_EST_NEXUS_REQ_QUEUE
, 0);
472 asd_write_reg_dword(asd_ha
, CSEQ_EST_NEXUS_REQ_QUEUE
+4, 0);
473 asd_write_reg_dword(asd_ha
, CSEQ_EST_NEXUS_REQ_COUNT
, 0);
474 asd_write_reg_dword(asd_ha
, CSEQ_EST_NEXUS_REQ_COUNT
+4, 0);
475 asd_write_reg_word(asd_ha
, CSEQ_Q_EST_NEXUS_HEAD
, 0xFFFF);
476 asd_write_reg_word(asd_ha
, CSEQ_Q_EST_NEXUS_TAIL
, 0xFFFF);
477 asd_write_reg_word(asd_ha
, CSEQ_NEED_EST_NEXUS_SCB
, 0);
478 asd_write_reg_byte(asd_ha
, CSEQ_EST_NEXUS_REQ_HEAD
, 0);
479 asd_write_reg_byte(asd_ha
, CSEQ_EST_NEXUS_REQ_TAIL
, 0);
480 asd_write_reg_byte(asd_ha
, CSEQ_EST_NEXUS_SCB_OFFSET
, 0);
482 /* CSEQ Mode independent, page 6 setup. */
483 asd_write_reg_word(asd_ha
, CSEQ_INT_ROUT_RET_ADDR0
, 0);
484 asd_write_reg_word(asd_ha
, CSEQ_INT_ROUT_RET_ADDR1
, 0);
485 asd_write_reg_word(asd_ha
, CSEQ_INT_ROUT_SCBPTR
, 0);
486 asd_write_reg_byte(asd_ha
, CSEQ_INT_ROUT_MODE
, 0);
487 asd_write_reg_byte(asd_ha
, CSEQ_ISR_SCRATCH_FLAGS
, 0);
488 asd_write_reg_word(asd_ha
, CSEQ_ISR_SAVE_SINDEX
, 0);
489 asd_write_reg_word(asd_ha
, CSEQ_ISR_SAVE_DINDEX
, 0);
490 asd_write_reg_word(asd_ha
, CSEQ_Q_MONIRTT_HEAD
, 0xFFFF);
491 asd_write_reg_word(asd_ha
, CSEQ_Q_MONIRTT_TAIL
, 0xFFFF);
492 /* Calculate the free scb mask. */
494 u16 cmdctx
= asd_get_cmdctx_size(asd_ha
);
495 cmdctx
= (~((cmdctx
/128)-1)) >> 8;
496 asd_write_reg_byte(asd_ha
, CSEQ_FREE_SCB_MASK
, (u8
)cmdctx
);
498 asd_write_reg_word(asd_ha
, CSEQ_BUILTIN_FREE_SCB_HEAD
,
500 asd_write_reg_word(asd_ha
, CSEQ_BUILTIN_FREE_SCB_TAIL
,
502 asd_write_reg_word(asd_ha
, CSEQ_EXTENDED_FREE_SCB_HEAD
, 0xFFFF);
503 asd_write_reg_word(asd_ha
, CSEQ_EXTENDED_FREE_SCB_TAIL
, 0xFFFF);
505 /* CSEQ Mode independent, page 7 setup. */
506 asd_write_reg_dword(asd_ha
, CSEQ_EMPTY_REQ_QUEUE
, 0);
507 asd_write_reg_dword(asd_ha
, CSEQ_EMPTY_REQ_QUEUE
+4, 0);
508 asd_write_reg_dword(asd_ha
, CSEQ_EMPTY_REQ_COUNT
, 0);
509 asd_write_reg_dword(asd_ha
, CSEQ_EMPTY_REQ_COUNT
+4, 0);
510 asd_write_reg_word(asd_ha
, CSEQ_Q_EMPTY_HEAD
, 0xFFFF);
511 asd_write_reg_word(asd_ha
, CSEQ_Q_EMPTY_TAIL
, 0xFFFF);
512 asd_write_reg_word(asd_ha
, CSEQ_NEED_EMPTY_SCB
, 0);
513 asd_write_reg_byte(asd_ha
, CSEQ_EMPTY_REQ_HEAD
, 0);
514 asd_write_reg_byte(asd_ha
, CSEQ_EMPTY_REQ_TAIL
, 0);
515 asd_write_reg_byte(asd_ha
, CSEQ_EMPTY_SCB_OFFSET
, 0);
516 asd_write_reg_word(asd_ha
, CSEQ_PRIMITIVE_DATA
, 0);
517 asd_write_reg_dword(asd_ha
, CSEQ_TIMEOUT_CONST
, 0);
521 * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
522 * @asd_ha: pointer to host adapter structure
524 static void asd_init_cseq_mdp(struct asd_ha_struct
*asd_ha
)
529 moffs
= CSEQ_PAGE_SIZE
* 2;
531 /* CSEQ Mode dependent, modes 0-7, page 0 setup. */
532 for (i
= 0; i
< 8; i
++) {
533 asd_write_reg_word(asd_ha
, i
*moffs
+CSEQ_LRM_SAVE_SINDEX
, 0);
534 asd_write_reg_word(asd_ha
, i
*moffs
+CSEQ_LRM_SAVE_SCBPTR
, 0);
535 asd_write_reg_word(asd_ha
, i
*moffs
+CSEQ_Q_LINK_HEAD
, 0xFFFF);
536 asd_write_reg_word(asd_ha
, i
*moffs
+CSEQ_Q_LINK_TAIL
, 0xFFFF);
537 asd_write_reg_byte(asd_ha
, i
*moffs
+CSEQ_LRM_SAVE_SCRPAGE
, 0);
540 /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
542 /* CSEQ Mode dependent, mode 8, page 0 setup. */
543 asd_write_reg_word(asd_ha
, CSEQ_RET_ADDR
, 0xFFFF);
544 asd_write_reg_word(asd_ha
, CSEQ_RET_SCBPTR
, 0);
545 asd_write_reg_word(asd_ha
, CSEQ_SAVE_SCBPTR
, 0);
546 asd_write_reg_word(asd_ha
, CSEQ_EMPTY_TRANS_CTX
, 0);
547 asd_write_reg_word(asd_ha
, CSEQ_RESP_LEN
, 0);
548 asd_write_reg_word(asd_ha
, CSEQ_TMF_SCBPTR
, 0);
549 asd_write_reg_word(asd_ha
, CSEQ_GLOBAL_PREV_SCB
, 0);
550 asd_write_reg_word(asd_ha
, CSEQ_GLOBAL_HEAD
, 0);
551 asd_write_reg_word(asd_ha
, CSEQ_CLEAR_LU_HEAD
, 0);
552 asd_write_reg_byte(asd_ha
, CSEQ_TMF_OPCODE
, 0);
553 asd_write_reg_byte(asd_ha
, CSEQ_SCRATCH_FLAGS
, 0);
554 asd_write_reg_word(asd_ha
, CSEQ_HSB_SITE
, 0);
555 asd_write_reg_word(asd_ha
, CSEQ_FIRST_INV_SCB_SITE
,
556 (u16
)last_scb_site_no
+1);
557 asd_write_reg_word(asd_ha
, CSEQ_FIRST_INV_DDB_SITE
,
558 (u16
)asd_ha
->hw_prof
.max_ddbs
);
560 /* CSEQ Mode dependent, mode 8, page 1 setup. */
561 asd_write_reg_dword(asd_ha
, CSEQ_LUN_TO_CLEAR
, 0);
562 asd_write_reg_dword(asd_ha
, CSEQ_LUN_TO_CLEAR
+ 4, 0);
563 asd_write_reg_dword(asd_ha
, CSEQ_LUN_TO_CHECK
, 0);
564 asd_write_reg_dword(asd_ha
, CSEQ_LUN_TO_CHECK
+ 4, 0);
566 /* CSEQ Mode dependent, mode 8, page 2 setup. */
567 /* Tell the sequencer the bus address of the first SCB. */
568 asd_write_reg_addr(asd_ha
, CSEQ_HQ_NEW_POINTER
,
569 asd_ha
->seq
.next_scb
.dma_handle
);
570 ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
571 (unsigned long long)asd_ha
->seq
.next_scb
.dma_handle
);
573 /* Tell the sequencer the first Done List entry address. */
574 asd_write_reg_addr(asd_ha
, CSEQ_HQ_DONE_BASE
,
575 asd_ha
->seq
.actual_dl
->dma_handle
);
577 /* Initialize the Q_DONE_POINTER with the least significant
578 * 4 bytes of the first Done List address. */
579 asd_write_reg_dword(asd_ha
, CSEQ_HQ_DONE_POINTER
,
580 ASD_BUSADDR_LO(asd_ha
->seq
.actual_dl
->dma_handle
));
582 asd_write_reg_byte(asd_ha
, CSEQ_HQ_DONE_PASS
, ASD_DEF_DL_TOGGLE
);
584 /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
588 * asd_init_cseq_scratch -- setup and init CSEQ
589 * @asd_ha: pointer to host adapter structure
591 * Setup and initialize Central sequencers. Initialize the mode
592 * independent and dependent scratch page to the default settings.
594 static void asd_init_cseq_scratch(struct asd_ha_struct
*asd_ha
)
596 asd_init_cseq_mip(asd_ha
);
597 asd_init_cseq_mdp(asd_ha
);
601 * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
602 * @asd_ha: pointer to host adapter structure
604 static void asd_init_lseq_mip(struct asd_ha_struct
*asd_ha
, u8 lseq
)
608 /* LSEQ Mode independent page 0 setup. */
609 asd_write_reg_word(asd_ha
, LmSEQ_Q_TGTXFR_HEAD(lseq
), 0xFFFF);
610 asd_write_reg_word(asd_ha
, LmSEQ_Q_TGTXFR_TAIL(lseq
), 0xFFFF);
611 asd_write_reg_byte(asd_ha
, LmSEQ_LINK_NUMBER(lseq
), lseq
);
612 asd_write_reg_byte(asd_ha
, LmSEQ_SCRATCH_FLAGS(lseq
),
613 ASD_NOTIFY_ENABLE_SPINUP
);
614 asd_write_reg_dword(asd_ha
, LmSEQ_CONNECTION_STATE(lseq
),0x08000000);
615 asd_write_reg_word(asd_ha
, LmSEQ_CONCTL(lseq
), 0);
616 asd_write_reg_byte(asd_ha
, LmSEQ_CONSTAT(lseq
), 0);
617 asd_write_reg_byte(asd_ha
, LmSEQ_CONNECTION_MODES(lseq
), 0);
618 asd_write_reg_word(asd_ha
, LmSEQ_REG1_ISR(lseq
), 0);
619 asd_write_reg_word(asd_ha
, LmSEQ_REG2_ISR(lseq
), 0);
620 asd_write_reg_word(asd_ha
, LmSEQ_REG3_ISR(lseq
), 0);
621 asd_write_reg_dword(asd_ha
, LmSEQ_REG0_ISR(lseq
), 0);
622 asd_write_reg_dword(asd_ha
, LmSEQ_REG0_ISR(lseq
)+4, 0);
624 /* LSEQ Mode independent page 1 setup. */
625 asd_write_reg_word(asd_ha
, LmSEQ_EST_NEXUS_SCBPTR0(lseq
), 0xFFFF);
626 asd_write_reg_word(asd_ha
, LmSEQ_EST_NEXUS_SCBPTR1(lseq
), 0xFFFF);
627 asd_write_reg_word(asd_ha
, LmSEQ_EST_NEXUS_SCBPTR2(lseq
), 0xFFFF);
628 asd_write_reg_word(asd_ha
, LmSEQ_EST_NEXUS_SCBPTR3(lseq
), 0xFFFF);
629 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq
), 0);
630 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq
), 0);
631 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq
), 0);
632 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq
), 0);
633 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_HEAD(lseq
), 0);
634 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_SCB_TAIL(lseq
), 0);
635 asd_write_reg_byte(asd_ha
, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq
), 0);
636 asd_write_reg_dword(asd_ha
, LmSEQ_TIMEOUT_CONST(lseq
), 0);
637 asd_write_reg_word(asd_ha
, LmSEQ_ISR_SAVE_SINDEX(lseq
), 0);
638 asd_write_reg_word(asd_ha
, LmSEQ_ISR_SAVE_DINDEX(lseq
), 0);
640 /* LSEQ Mode Independent page 2 setup. */
641 asd_write_reg_word(asd_ha
, LmSEQ_EMPTY_SCB_PTR0(lseq
), 0xFFFF);
642 asd_write_reg_word(asd_ha
, LmSEQ_EMPTY_SCB_PTR1(lseq
), 0xFFFF);
643 asd_write_reg_word(asd_ha
, LmSEQ_EMPTY_SCB_PTR2(lseq
), 0xFFFF);
644 asd_write_reg_word(asd_ha
, LmSEQ_EMPTY_SCB_PTR3(lseq
), 0xFFFF);
645 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_OPCD0(lseq
), 0);
646 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_OPCD1(lseq
), 0);
647 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_OPCD2(lseq
), 0);
648 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_OPCD3(lseq
), 0);
649 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_HEAD(lseq
), 0);
650 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_SCB_TAIL(lseq
), 0);
651 asd_write_reg_byte(asd_ha
, LmSEQ_EMPTY_BUFS_AVAIL(lseq
), 0);
652 for (i
= 0; i
< 12; i
+= 4)
653 asd_write_reg_dword(asd_ha
, LmSEQ_ATA_SCR_REGS(lseq
) + i
, 0);
655 /* LSEQ Mode Independent page 3 setup. */
657 /* Device present timer timeout */
658 asd_write_reg_dword(asd_ha
, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq
),
659 ASD_DEV_PRESENT_TIMEOUT
);
661 /* SATA interlock timer disabled */
662 asd_write_reg_dword(asd_ha
, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq
),
663 ASD_SATA_INTERLOCK_TIMEOUT
);
665 /* STP shutdown timer timeout constant, IGNORED by the sequencer,
667 asd_write_reg_dword(asd_ha
, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq
),
668 ASD_STP_SHUTDOWN_TIMEOUT
);
670 asd_write_reg_dword(asd_ha
, LmSEQ_SRST_ASSERT_TIMEOUT(lseq
),
671 ASD_SRST_ASSERT_TIMEOUT
);
673 asd_write_reg_dword(asd_ha
, LmSEQ_RCV_FIS_TIMEOUT(lseq
),
674 ASD_RCV_FIS_TIMEOUT
);
676 asd_write_reg_dword(asd_ha
, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq
),
677 ASD_ONE_MILLISEC_TIMEOUT
);
680 asd_write_reg_dword(asd_ha
, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq
),
681 ASD_TEN_MILLISEC_TIMEOUT
);
683 asd_write_reg_dword(asd_ha
, LmSEQ_SMP_RCV_TIMEOUT(lseq
),
684 ASD_SMP_RCV_TIMEOUT
);
688 * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
689 * @asd_ha: pointer to host adapter structure
691 static void asd_init_lseq_mdp(struct asd_ha_struct
*asd_ha
, int lseq
)
698 mode2_task
, /* mode 2 */
700 0xFFFF, /* mode 4/5 */
701 0xFFFF, /* mode 4/5 */
705 * Mode 0,1,2 and 4/5 have common field on page 0 for the first
708 for (i
= 0; i
< 3; i
++) {
709 moffs
= i
* LSEQ_MODE_SCRATCH_SIZE
;
710 asd_write_reg_word(asd_ha
, LmSEQ_RET_ADDR(lseq
)+moffs
,
712 asd_write_reg_word(asd_ha
, LmSEQ_REG0_MODE(lseq
)+moffs
, 0);
713 asd_write_reg_word(asd_ha
, LmSEQ_MODE_FLAGS(lseq
)+moffs
, 0);
714 asd_write_reg_word(asd_ha
, LmSEQ_RET_ADDR2(lseq
)+moffs
,0xFFFF);
715 asd_write_reg_word(asd_ha
, LmSEQ_RET_ADDR1(lseq
)+moffs
,0xFFFF);
716 asd_write_reg_byte(asd_ha
, LmSEQ_OPCODE_TO_CSEQ(lseq
)+moffs
,0);
717 asd_write_reg_word(asd_ha
, LmSEQ_DATA_TO_CSEQ(lseq
)+moffs
,0);
720 * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
722 asd_write_reg_word(asd_ha
,
723 LmSEQ_RET_ADDR(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
,
725 asd_write_reg_word(asd_ha
,
726 LmSEQ_REG0_MODE(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
,0);
727 asd_write_reg_word(asd_ha
,
728 LmSEQ_MODE_FLAGS(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
, 0);
729 asd_write_reg_word(asd_ha
,
730 LmSEQ_RET_ADDR2(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
,0xFFFF);
731 asd_write_reg_word(asd_ha
,
732 LmSEQ_RET_ADDR1(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
,0xFFFF);
733 asd_write_reg_byte(asd_ha
,
734 LmSEQ_OPCODE_TO_CSEQ(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
,0);
735 asd_write_reg_word(asd_ha
,
736 LmSEQ_DATA_TO_CSEQ(lseq
)+LSEQ_MODE5_PAGE0_OFFSET
, 0);
738 /* LSEQ Mode dependent 0, page 0 setup. */
739 asd_write_reg_word(asd_ha
, LmSEQ_FIRST_INV_DDB_SITE(lseq
),
740 (u16
)asd_ha
->hw_prof
.max_ddbs
);
741 asd_write_reg_word(asd_ha
, LmSEQ_EMPTY_TRANS_CTX(lseq
), 0);
742 asd_write_reg_word(asd_ha
, LmSEQ_RESP_LEN(lseq
), 0);
743 asd_write_reg_word(asd_ha
, LmSEQ_FIRST_INV_SCB_SITE(lseq
),
744 (u16
)last_scb_site_no
+1);
745 asd_write_reg_word(asd_ha
, LmSEQ_INTEN_SAVE(lseq
),
746 (u16
) ((LmM0INTEN_MASK
& 0xFFFF0000) >> 16));
747 asd_write_reg_word(asd_ha
, LmSEQ_INTEN_SAVE(lseq
) + 2,
748 (u16
) LmM0INTEN_MASK
& 0xFFFF);
749 asd_write_reg_byte(asd_ha
, LmSEQ_LINK_RST_FRM_LEN(lseq
), 0);
750 asd_write_reg_byte(asd_ha
, LmSEQ_LINK_RST_PROTOCOL(lseq
), 0);
751 asd_write_reg_byte(asd_ha
, LmSEQ_RESP_STATUS(lseq
), 0);
752 asd_write_reg_byte(asd_ha
, LmSEQ_LAST_LOADED_SGE(lseq
), 0);
753 asd_write_reg_word(asd_ha
, LmSEQ_SAVE_SCBPTR(lseq
), 0);
755 /* LSEQ mode dependent, mode 1, page 0 setup. */
756 asd_write_reg_word(asd_ha
, LmSEQ_Q_XMIT_HEAD(lseq
), 0xFFFF);
757 asd_write_reg_word(asd_ha
, LmSEQ_M1_EMPTY_TRANS_CTX(lseq
), 0);
758 asd_write_reg_word(asd_ha
, LmSEQ_INI_CONN_TAG(lseq
), 0);
759 asd_write_reg_byte(asd_ha
, LmSEQ_FAILED_OPEN_STATUS(lseq
), 0);
760 asd_write_reg_byte(asd_ha
, LmSEQ_XMIT_REQUEST_TYPE(lseq
), 0);
761 asd_write_reg_byte(asd_ha
, LmSEQ_M1_RESP_STATUS(lseq
), 0);
762 asd_write_reg_byte(asd_ha
, LmSEQ_M1_LAST_LOADED_SGE(lseq
), 0);
763 asd_write_reg_word(asd_ha
, LmSEQ_M1_SAVE_SCBPTR(lseq
), 0);
765 /* LSEQ Mode dependent mode 2, page 0 setup */
766 asd_write_reg_word(asd_ha
, LmSEQ_PORT_COUNTER(lseq
), 0);
767 asd_write_reg_word(asd_ha
, LmSEQ_PM_TABLE_PTR(lseq
), 0);
768 asd_write_reg_word(asd_ha
, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq
), 0);
769 asd_write_reg_word(asd_ha
, LmSEQ_IP_BITL(lseq
), 0);
770 asd_write_reg_word(asd_ha
, LmSEQ_COPY_SMP_CONN_TAG(lseq
), 0);
771 asd_write_reg_byte(asd_ha
, LmSEQ_P0M2_OFFS1AH(lseq
), 0);
773 /* LSEQ Mode dependent, mode 4/5, page 0 setup. */
774 asd_write_reg_byte(asd_ha
, LmSEQ_SAVED_OOB_STATUS(lseq
), 0);
775 asd_write_reg_byte(asd_ha
, LmSEQ_SAVED_OOB_MODE(lseq
), 0);
776 asd_write_reg_word(asd_ha
, LmSEQ_Q_LINK_HEAD(lseq
), 0xFFFF);
777 asd_write_reg_byte(asd_ha
, LmSEQ_LINK_RST_ERR(lseq
), 0);
778 asd_write_reg_byte(asd_ha
, LmSEQ_SAVED_OOB_SIGNALS(lseq
), 0);
779 asd_write_reg_byte(asd_ha
, LmSEQ_SAS_RESET_MODE(lseq
), 0);
780 asd_write_reg_byte(asd_ha
, LmSEQ_LINK_RESET_RETRY_COUNT(lseq
), 0);
781 asd_write_reg_byte(asd_ha
, LmSEQ_NUM_LINK_RESET_RETRIES(lseq
), 0);
782 asd_write_reg_word(asd_ha
, LmSEQ_OOB_INT_ENABLES(lseq
), 0);
784 * Set the desired interval between transmissions of the NOTIFY
785 * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
787 asd_write_reg_word(asd_ha
, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq
),
788 ASD_NOTIFY_TIMEOUT
- 1);
789 /* No delay for the first NOTIFY to be sent to the attached target. */
790 asd_write_reg_word(asd_ha
, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq
),
791 ASD_NOTIFY_DOWN_COUNT
);
792 asd_write_reg_word(asd_ha
, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq
),
793 ASD_NOTIFY_DOWN_COUNT
);
795 /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
796 for (i
= 0; i
< 2; i
++) {
798 /* Start from Page 1 of Mode 0 and 1. */
799 moffs
= LSEQ_PAGE_SIZE
+ i
*LSEQ_MODE_SCRATCH_SIZE
;
800 /* All the fields of page 1 can be initialized to 0. */
801 for (j
= 0; j
< LSEQ_PAGE_SIZE
; j
+= 4)
802 asd_write_reg_dword(asd_ha
, LmSCRATCH(lseq
)+moffs
+j
,0);
805 /* LSEQ Mode dependent, mode 2, page 1 setup. */
806 asd_write_reg_dword(asd_ha
, LmSEQ_INVALID_DWORD_COUNT(lseq
), 0);
807 asd_write_reg_dword(asd_ha
, LmSEQ_DISPARITY_ERROR_COUNT(lseq
), 0);
808 asd_write_reg_dword(asd_ha
, LmSEQ_LOSS_OF_SYNC_COUNT(lseq
), 0);
810 /* LSEQ Mode dependent, mode 4/5, page 1. */
811 for (i
= 0; i
< LSEQ_PAGE_SIZE
; i
+=4)
812 asd_write_reg_dword(asd_ha
, LmSEQ_FRAME_TYPE_MASK(lseq
)+i
, 0);
813 asd_write_reg_byte(asd_ha
, LmSEQ_FRAME_TYPE_MASK(lseq
), 0xFF);
814 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_DEST_ADDR_MASK(lseq
), 0xFF);
815 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_DEST_ADDR_MASK(lseq
)+1,0xFF);
816 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_DEST_ADDR_MASK(lseq
)+2,0xFF);
817 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_SRC_ADDR_MASK(lseq
), 0xFF);
818 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_SRC_ADDR_MASK(lseq
)+1, 0xFF);
819 asd_write_reg_byte(asd_ha
, LmSEQ_HASHED_SRC_ADDR_MASK(lseq
)+2, 0xFF);
820 asd_write_reg_dword(asd_ha
, LmSEQ_DATA_OFFSET(lseq
), 0xFFFFFFFF);
822 /* LSEQ Mode dependent, mode 0, page 2 setup. */
823 asd_write_reg_dword(asd_ha
, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq
), 0);
824 asd_write_reg_byte(asd_ha
, LmSEQ_DEVICE_BITS(lseq
), 0);
825 asd_write_reg_word(asd_ha
, LmSEQ_SDB_DDB(lseq
), 0);
826 asd_write_reg_byte(asd_ha
, LmSEQ_SDB_NUM_TAGS(lseq
), 0);
827 asd_write_reg_byte(asd_ha
, LmSEQ_SDB_CURR_TAG(lseq
), 0);
829 /* LSEQ Mode Dependent 1, page 2 setup. */
830 asd_write_reg_dword(asd_ha
, LmSEQ_TX_ID_ADDR_FRAME(lseq
), 0);
831 asd_write_reg_dword(asd_ha
, LmSEQ_TX_ID_ADDR_FRAME(lseq
)+4, 0);
832 asd_write_reg_dword(asd_ha
, LmSEQ_OPEN_TIMER_TERM_TS(lseq
), 0);
833 asd_write_reg_dword(asd_ha
, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq
), 0);
834 asd_write_reg_dword(asd_ha
, LmSEQ_LAST_LOADED_SG_EL(lseq
), 0);
836 /* LSEQ Mode Dependent 2, page 2 setup. */
837 /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
839 asd_write_reg_dword(asd_ha
, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq
),0);
840 asd_write_reg_dword(asd_ha
, LmSEQ_CLOSE_TIMER_TERM_TS(lseq
), 0);
841 asd_write_reg_dword(asd_ha
, LmSEQ_BREAK_TIMER_TERM_TS(lseq
), 0);
842 asd_write_reg_dword(asd_ha
, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq
), 0);
843 asd_write_reg_dword(asd_ha
,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq
),0);
844 asd_write_reg_dword(asd_ha
, LmSEQ_MCTL_TIMER_TERM_TS(lseq
), 0);
846 /* LSEQ Mode Dependent 4/5, page 2 setup. */
847 asd_write_reg_dword(asd_ha
, LmSEQ_COMINIT_TIMER_TERM_TS(lseq
), 0);
848 asd_write_reg_dword(asd_ha
, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq
), 0);
849 asd_write_reg_dword(asd_ha
, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq
), 0);
850 asd_write_reg_dword(asd_ha
, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq
), 0);
854 * asd_init_lseq_scratch -- setup and init link sequencers
855 * @asd_ha: pointer to host adapter struct
857 static void asd_init_lseq_scratch(struct asd_ha_struct
*asd_ha
)
862 lseq_mask
= asd_ha
->hw_prof
.enabled_phys
;
863 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
) {
864 asd_init_lseq_mip(asd_ha
, lseq
);
865 asd_init_lseq_mdp(asd_ha
, lseq
);
870 * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
871 * @asd_ha: pointer to host adapter structure
873 * This should be done before initializing common CSEQ and LSEQ
874 * scratch since those areas depend on some computed values here,
875 * last_scb_site_no, etc.
877 static void asd_init_scb_sites(struct asd_ha_struct
*asd_ha
)
882 for (site_no
= asd_ha
->hw_prof
.max_scbs
-1;
887 /* Initialize all fields in the SCB site to 0. */
888 for (i
= 0; i
< ASD_SCB_SIZE
; i
+= 4)
889 asd_scbsite_write_dword(asd_ha
, site_no
, i
, 0);
891 /* Initialize SCB Site Opcode field to invalid. */
892 asd_scbsite_write_byte(asd_ha
, site_no
,
893 offsetof(struct scb_header
, opcode
),
896 /* Initialize SCB Site Flags field to mean a response
897 * frame has been received. This means inadvertent
898 * frames received to be dropped. */
899 asd_scbsite_write_byte(asd_ha
, site_no
, 0x49, 0x01);
901 /* Workaround needed by SEQ to fix a SATA issue is to exclude
902 * certain SCB sites from the free list. */
903 if (!SCB_SITE_VALID(site_no
))
906 if (last_scb_site_no
== 0)
907 last_scb_site_no
= site_no
;
909 /* For every SCB site, we need to initialize the
910 * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
911 * and SG Element Flag. */
913 /* Q_NEXT field of the last SCB is invalidated. */
914 asd_scbsite_write_word(asd_ha
, site_no
, 0, first_scb_site_no
);
916 first_scb_site_no
= site_no
;
919 asd_ha
->hw_prof
.max_scbs
= max_scbs
;
920 ASD_DPRINTK("max_scbs:%d\n", asd_ha
->hw_prof
.max_scbs
);
921 ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no
);
922 ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no
);
926 * asd_init_cseq_cio - initialize CSEQ CIO registers
927 * @asd_ha: pointer to host adapter structure
929 static void asd_init_cseq_cio(struct asd_ha_struct
*asd_ha
)
933 asd_write_reg_byte(asd_ha
, CSEQCOMINTEN
, 0);
934 asd_write_reg_byte(asd_ha
, CSEQDLCTL
, ASD_DL_SIZE_BITS
);
935 asd_write_reg_byte(asd_ha
, CSEQDLOFFS
, 0);
936 asd_write_reg_byte(asd_ha
, CSEQDLOFFS
+1, 0);
937 asd_ha
->seq
.scbpro
= 0;
938 asd_write_reg_dword(asd_ha
, SCBPRO
, 0);
939 asd_write_reg_dword(asd_ha
, CSEQCON
, 0);
941 /* Initialize CSEQ Mode 11 Interrupt Vectors.
942 * The addresses are 16 bit wide and in dword units.
943 * The values of their macros are in byte units.
944 * Thus we have to divide by 4. */
945 asd_write_reg_word(asd_ha
, CM11INTVEC0
, cseq_vecs
[0]);
946 asd_write_reg_word(asd_ha
, CM11INTVEC1
, cseq_vecs
[1]);
947 asd_write_reg_word(asd_ha
, CM11INTVEC2
, cseq_vecs
[2]);
949 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
950 asd_write_reg_byte(asd_ha
, CARP2INTEN
, EN_ARP2HALTC
);
952 /* Initialize CSEQ Scratch Page to 0x04. */
953 asd_write_reg_byte(asd_ha
, CSCRATCHPAGE
, 0x04);
955 /* Initialize CSEQ Mode[0-8] Dependent registers. */
956 /* Initialize Scratch Page to 0. */
957 for (i
= 0; i
< 9; i
++)
958 asd_write_reg_byte(asd_ha
, CMnSCRATCHPAGE(i
), 0);
960 /* Reset the ARP2 Program Count. */
961 asd_write_reg_word(asd_ha
, CPRGMCNT
, cseq_idle_loop
);
963 for (i
= 0; i
< 8; i
++) {
964 /* Initialize Mode n Link m Interrupt Enable. */
965 asd_write_reg_dword(asd_ha
, CMnINTEN(i
), EN_CMnRSPMBXF
);
966 /* Initialize Mode n Request Mailbox. */
967 asd_write_reg_dword(asd_ha
, CMnREQMBX(i
), 0);
972 * asd_init_lseq_cio -- initialize LmSEQ CIO registers
973 * @asd_ha: pointer to host adapter structure
975 static void asd_init_lseq_cio(struct asd_ha_struct
*asd_ha
, int lseq
)
980 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
981 asd_write_reg_dword(asd_ha
, LmARP2INTEN(lseq
), EN_ARP2HALTC
);
983 asd_write_reg_byte(asd_ha
, LmSCRATCHPAGE(lseq
), 0);
985 /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
986 for (i
= 0; i
< 3; i
++)
987 asd_write_reg_byte(asd_ha
, LmMnSCRATCHPAGE(lseq
, i
), 0);
989 /* Initialize Mode 5 SCRATCHPAGE to 0. */
990 asd_write_reg_byte(asd_ha
, LmMnSCRATCHPAGE(lseq
, 5), 0);
992 asd_write_reg_dword(asd_ha
, LmRSPMBX(lseq
), 0);
993 /* Initialize Mode 0,1,2 and 5 Interrupt Enable and
994 * Interrupt registers. */
995 asd_write_reg_dword(asd_ha
, LmMnINTEN(lseq
, 0), LmM0INTEN_MASK
);
996 asd_write_reg_dword(asd_ha
, LmMnINT(lseq
, 0), 0xFFFFFFFF);
998 asd_write_reg_dword(asd_ha
, LmMnINTEN(lseq
, 1), LmM1INTEN_MASK
);
999 asd_write_reg_dword(asd_ha
, LmMnINT(lseq
, 1), 0xFFFFFFFF);
1001 asd_write_reg_dword(asd_ha
, LmMnINTEN(lseq
, 2), LmM2INTEN_MASK
);
1002 asd_write_reg_dword(asd_ha
, LmMnINT(lseq
, 2), 0xFFFFFFFF);
1004 asd_write_reg_dword(asd_ha
, LmMnINTEN(lseq
, 5), LmM5INTEN_MASK
);
1005 asd_write_reg_dword(asd_ha
, LmMnINT(lseq
, 5), 0xFFFFFFFF);
1007 /* Enable HW Timer status. */
1008 asd_write_reg_byte(asd_ha
, LmHWTSTATEN(lseq
), LmHWTSTATEN_MASK
);
1010 /* Enable Primitive Status 0 and 1. */
1011 asd_write_reg_dword(asd_ha
, LmPRIMSTAT0EN(lseq
), LmPRIMSTAT0EN_MASK
);
1012 asd_write_reg_dword(asd_ha
, LmPRIMSTAT1EN(lseq
), LmPRIMSTAT1EN_MASK
);
1014 /* Enable Frame Error. */
1015 asd_write_reg_dword(asd_ha
, LmFRMERREN(lseq
), LmFRMERREN_MASK
);
1016 asd_write_reg_byte(asd_ha
, LmMnHOLDLVL(lseq
, 0), 0x50);
1018 /* Initialize Mode 0 Transfer Level to 512. */
1019 asd_write_reg_byte(asd_ha
, LmMnXFRLVL(lseq
, 0), LmMnXFRLVL_512
);
1020 /* Initialize Mode 1 Transfer Level to 256. */
1021 asd_write_reg_byte(asd_ha
, LmMnXFRLVL(lseq
, 1), LmMnXFRLVL_256
);
1023 /* Initialize Program Count. */
1024 asd_write_reg_word(asd_ha
, LmPRGMCNT(lseq
), lseq_idle_loop
);
1026 /* Enable Blind SG Move. */
1027 asd_write_reg_dword(asd_ha
, LmMODECTL(lseq
), LmBLIND48
);
1028 asd_write_reg_word(asd_ha
, LmM3SATATIMER(lseq
),
1029 ASD_SATA_INTERLOCK_TIMEOUT
);
1031 (void) asd_read_reg_dword(asd_ha
, LmREQMBX(lseq
));
1033 /* Clear Primitive Status 0 and 1. */
1034 asd_write_reg_dword(asd_ha
, LmPRMSTAT0(lseq
), 0xFFFFFFFF);
1035 asd_write_reg_dword(asd_ha
, LmPRMSTAT1(lseq
), 0xFFFFFFFF);
1037 /* Clear HW Timer status. */
1038 asd_write_reg_byte(asd_ha
, LmHWTSTAT(lseq
), 0xFF);
1040 /* Clear DMA Errors for Mode 0 and 1. */
1041 asd_write_reg_byte(asd_ha
, LmMnDMAERRS(lseq
, 0), 0xFF);
1042 asd_write_reg_byte(asd_ha
, LmMnDMAERRS(lseq
, 1), 0xFF);
1044 /* Clear SG DMA Errors for Mode 0 and 1. */
1045 asd_write_reg_byte(asd_ha
, LmMnSGDMAERRS(lseq
, 0), 0xFF);
1046 asd_write_reg_byte(asd_ha
, LmMnSGDMAERRS(lseq
, 1), 0xFF);
1048 /* Clear Mode 0 Buffer Parity Error. */
1049 asd_write_reg_byte(asd_ha
, LmMnBUFSTAT(lseq
, 0), LmMnBUFPERR
);
1051 /* Clear Mode 0 Frame Error register. */
1052 asd_write_reg_dword(asd_ha
, LmMnFRMERR(lseq
, 0), 0xFFFFFFFF);
1054 /* Reset LSEQ external interrupt arbiter. */
1055 asd_write_reg_byte(asd_ha
, LmARP2INTCTL(lseq
), RSTINTCTL
);
1057 /* Set the Phy SAS for the LmSEQ WWN. */
1058 sas_addr
= asd_ha
->phys
[lseq
].phy_desc
->sas_addr
;
1059 for (i
= 0; i
< SAS_ADDR_SIZE
; i
++)
1060 asd_write_reg_byte(asd_ha
, LmWWN(lseq
) + i
, sas_addr
[i
]);
1062 /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
1063 asd_write_reg_byte(asd_ha
, LmMnXMTSIZE(lseq
, 1), 0);
1065 /* Set the Bus Inactivity Time Limit Timer. */
1066 asd_write_reg_word(asd_ha
, LmBITL_TIMER(lseq
), 9);
1068 /* Enable SATA Port Multiplier. */
1069 asd_write_reg_byte(asd_ha
, LmMnSATAFS(lseq
, 1), 0x80);
1071 /* Initialize Interrupt Vector[0-10] address in Mode 3.
1072 * See the comment on CSEQ_INT_* */
1073 asd_write_reg_word(asd_ha
, LmM3INTVEC0(lseq
), lseq_vecs
[0]);
1074 asd_write_reg_word(asd_ha
, LmM3INTVEC1(lseq
), lseq_vecs
[1]);
1075 asd_write_reg_word(asd_ha
, LmM3INTVEC2(lseq
), lseq_vecs
[2]);
1076 asd_write_reg_word(asd_ha
, LmM3INTVEC3(lseq
), lseq_vecs
[3]);
1077 asd_write_reg_word(asd_ha
, LmM3INTVEC4(lseq
), lseq_vecs
[4]);
1078 asd_write_reg_word(asd_ha
, LmM3INTVEC5(lseq
), lseq_vecs
[5]);
1079 asd_write_reg_word(asd_ha
, LmM3INTVEC6(lseq
), lseq_vecs
[6]);
1080 asd_write_reg_word(asd_ha
, LmM3INTVEC7(lseq
), lseq_vecs
[7]);
1081 asd_write_reg_word(asd_ha
, LmM3INTVEC8(lseq
), lseq_vecs
[8]);
1082 asd_write_reg_word(asd_ha
, LmM3INTVEC9(lseq
), lseq_vecs
[9]);
1083 asd_write_reg_word(asd_ha
, LmM3INTVEC10(lseq
), lseq_vecs
[10]);
1085 * Program the Link LED control, applicable only for
1086 * Chip Rev. B or later.
1088 asd_write_reg_dword(asd_ha
, LmCONTROL(lseq
),
1089 (LEDTIMER
| LEDMODE_TXRX
| LEDTIMERS_100ms
));
1091 /* Set the Align Rate for SAS and STP mode. */
1092 asd_write_reg_byte(asd_ha
, LmM1SASALIGN(lseq
), SAS_ALIGN_DEFAULT
);
1093 asd_write_reg_byte(asd_ha
, LmM1STPALIGN(lseq
), STP_ALIGN_DEFAULT
);
1098 * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
1099 * @asd_ha: pointer to host adapter struct
1101 static void asd_post_init_cseq(struct asd_ha_struct
*asd_ha
)
1105 for (i
= 0; i
< 8; i
++)
1106 asd_write_reg_dword(asd_ha
, CMnINT(i
), 0xFFFFFFFF);
1107 for (i
= 0; i
< 8; i
++)
1108 asd_read_reg_dword(asd_ha
, CMnRSPMBX(i
));
1109 /* Reset the external interrupt arbiter. */
1110 asd_write_reg_byte(asd_ha
, CARP2INTCTL
, RSTINTCTL
);
1114 * asd_init_ddb_0 -- initialize DDB 0
1115 * @asd_ha: pointer to host adapter structure
1117 * Initialize DDB site 0 which is used internally by the sequencer.
1119 static void asd_init_ddb_0(struct asd_ha_struct
*asd_ha
)
1123 /* Zero out the DDB explicitly */
1124 for (i
= 0; i
< sizeof(struct asd_ddb_seq_shared
); i
+=4)
1125 asd_ddbsite_write_dword(asd_ha
, 0, i
, 0);
1127 asd_ddbsite_write_word(asd_ha
, 0,
1128 offsetof(struct asd_ddb_seq_shared
, q_free_ddb_head
), 0);
1129 asd_ddbsite_write_word(asd_ha
, 0,
1130 offsetof(struct asd_ddb_seq_shared
, q_free_ddb_tail
),
1131 asd_ha
->hw_prof
.max_ddbs
-1);
1132 asd_ddbsite_write_word(asd_ha
, 0,
1133 offsetof(struct asd_ddb_seq_shared
, q_free_ddb_cnt
), 0);
1134 asd_ddbsite_write_word(asd_ha
, 0,
1135 offsetof(struct asd_ddb_seq_shared
, q_used_ddb_head
), 0xFFFF);
1136 asd_ddbsite_write_word(asd_ha
, 0,
1137 offsetof(struct asd_ddb_seq_shared
, q_used_ddb_tail
), 0xFFFF);
1138 asd_ddbsite_write_word(asd_ha
, 0,
1139 offsetof(struct asd_ddb_seq_shared
, shared_mem_lock
), 0);
1140 asd_ddbsite_write_word(asd_ha
, 0,
1141 offsetof(struct asd_ddb_seq_shared
, smp_conn_tag
), 0);
1142 asd_ddbsite_write_word(asd_ha
, 0,
1143 offsetof(struct asd_ddb_seq_shared
, est_nexus_buf_cnt
), 0);
1144 asd_ddbsite_write_word(asd_ha
, 0,
1145 offsetof(struct asd_ddb_seq_shared
, est_nexus_buf_thresh
),
1146 asd_ha
->hw_prof
.num_phys
* 2);
1147 asd_ddbsite_write_byte(asd_ha
, 0,
1148 offsetof(struct asd_ddb_seq_shared
, settable_max_contexts
),0);
1149 asd_ddbsite_write_byte(asd_ha
, 0,
1150 offsetof(struct asd_ddb_seq_shared
, conn_not_active
), 0xFF);
1151 asd_ddbsite_write_byte(asd_ha
, 0,
1152 offsetof(struct asd_ddb_seq_shared
, phy_is_up
), 0x00);
1153 /* DDB 0 is reserved */
1154 set_bit(0, asd_ha
->hw_prof
.ddb_bitmap
);
1157 static void asd_seq_init_ddb_sites(struct asd_ha_struct
*asd_ha
)
1160 unsigned int ddb_site
;
1162 for (ddb_site
= 0 ; ddb_site
< ASD_MAX_DDBS
; ddb_site
++)
1163 for (i
= 0; i
< sizeof(struct asd_ddb_ssp_smp_target_port
); i
+= 4)
1164 asd_ddbsite_write_dword(asd_ha
, ddb_site
, i
, 0);
1168 * asd_seq_setup_seqs -- setup and initialize central and link sequencers
1169 * @asd_ha: pointer to host adapter structure
1171 static void asd_seq_setup_seqs(struct asd_ha_struct
*asd_ha
)
1176 /* Initialize DDB sites */
1177 asd_seq_init_ddb_sites(asd_ha
);
1179 /* Initialize SCB sites. Done first to compute some values which
1180 * the rest of the init code depends on. */
1181 asd_init_scb_sites(asd_ha
);
1183 /* Initialize CSEQ Scratch RAM registers. */
1184 asd_init_cseq_scratch(asd_ha
);
1186 /* Initialize LmSEQ Scratch RAM registers. */
1187 asd_init_lseq_scratch(asd_ha
);
1189 /* Initialize CSEQ CIO registers. */
1190 asd_init_cseq_cio(asd_ha
);
1192 asd_init_ddb_0(asd_ha
);
1194 /* Initialize LmSEQ CIO registers. */
1195 lseq_mask
= asd_ha
->hw_prof
.enabled_phys
;
1196 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
)
1197 asd_init_lseq_cio(asd_ha
, lseq
);
1198 asd_post_init_cseq(asd_ha
);
1203 * asd_seq_start_cseq -- start the central sequencer, CSEQ
1204 * @asd_ha: pointer to host adapter structure
1206 static int asd_seq_start_cseq(struct asd_ha_struct
*asd_ha
)
1208 /* Reset the ARP2 instruction to location zero. */
1209 asd_write_reg_word(asd_ha
, CPRGMCNT
, cseq_idle_loop
);
1211 /* Unpause the CSEQ */
1212 return asd_unpause_cseq(asd_ha
);
1216 * asd_seq_start_lseq -- start a link sequencer
1217 * @asd_ha: pointer to host adapter structure
1218 * @lseq: the link sequencer of interest
1220 static int asd_seq_start_lseq(struct asd_ha_struct
*asd_ha
, int lseq
)
1222 /* Reset the ARP2 instruction to location zero. */
1223 asd_write_reg_word(asd_ha
, LmPRGMCNT(lseq
), lseq_idle_loop
);
1225 /* Unpause the LmSEQ */
1226 return asd_seq_unpause_lseq(asd_ha
, lseq
);
1229 int asd_release_firmware(void)
1232 release_firmware(sequencer_fw
);
1236 static int asd_request_firmware(struct asd_ha_struct
*asd_ha
)
1239 struct sequencer_file_header header
;
1240 const struct sequencer_file_header
*hdr_ptr
;
1242 u16
*ptr_cseq_vecs
, *ptr_lseq_vecs
;
1245 /* already loaded */
1248 err
= request_firmware(&sequencer_fw
,
1249 SAS_RAZOR_SEQUENCER_FW_FILE
,
1250 &asd_ha
->pcidev
->dev
);
1254 hdr_ptr
= (const struct sequencer_file_header
*)sequencer_fw
->data
;
1256 header
.csum
= le32_to_cpu(hdr_ptr
->csum
);
1257 header
.major
= le32_to_cpu(hdr_ptr
->major
);
1258 header
.minor
= le32_to_cpu(hdr_ptr
->minor
);
1259 header
.cseq_table_offset
= le32_to_cpu(hdr_ptr
->cseq_table_offset
);
1260 header
.cseq_table_size
= le32_to_cpu(hdr_ptr
->cseq_table_size
);
1261 header
.lseq_table_offset
= le32_to_cpu(hdr_ptr
->lseq_table_offset
);
1262 header
.lseq_table_size
= le32_to_cpu(hdr_ptr
->lseq_table_size
);
1263 header
.cseq_code_offset
= le32_to_cpu(hdr_ptr
->cseq_code_offset
);
1264 header
.cseq_code_size
= le32_to_cpu(hdr_ptr
->cseq_code_size
);
1265 header
.lseq_code_offset
= le32_to_cpu(hdr_ptr
->lseq_code_offset
);
1266 header
.lseq_code_size
= le32_to_cpu(hdr_ptr
->lseq_code_size
);
1267 header
.mode2_task
= le16_to_cpu(hdr_ptr
->mode2_task
);
1268 header
.cseq_idle_loop
= le16_to_cpu(hdr_ptr
->cseq_idle_loop
);
1269 header
.lseq_idle_loop
= le16_to_cpu(hdr_ptr
->lseq_idle_loop
);
1271 for (i
= sizeof(header
.csum
); i
< sequencer_fw
->size
; i
++)
1272 csum
+= sequencer_fw
->data
[i
];
1274 if (csum
!= header
.csum
) {
1275 asd_printk("Firmware file checksum mismatch\n");
1279 if (header
.cseq_table_size
!= CSEQ_NUM_VECS
||
1280 header
.lseq_table_size
!= LSEQ_NUM_VECS
) {
1281 asd_printk("Firmware file table size mismatch\n");
1285 asd_printk("Found sequencer Firmware version %d.%d (%s)\n",
1286 header
.major
, header
.minor
, hdr_ptr
->version
);
1288 if (header
.major
!= SAS_RAZOR_SEQUENCER_FW_MAJOR
) {
1289 asd_printk("Firmware Major Version Mismatch;"
1290 "driver requires version %d.X",
1291 SAS_RAZOR_SEQUENCER_FW_MAJOR
);
1295 ptr_cseq_vecs
= (u16
*)&sequencer_fw
->data
[header
.cseq_table_offset
];
1296 ptr_lseq_vecs
= (u16
*)&sequencer_fw
->data
[header
.lseq_table_offset
];
1297 mode2_task
= header
.mode2_task
;
1298 cseq_idle_loop
= header
.cseq_idle_loop
;
1299 lseq_idle_loop
= header
.lseq_idle_loop
;
1301 for (i
= 0; i
< CSEQ_NUM_VECS
; i
++)
1302 cseq_vecs
[i
] = le16_to_cpu(ptr_cseq_vecs
[i
]);
1304 for (i
= 0; i
< LSEQ_NUM_VECS
; i
++)
1305 lseq_vecs
[i
] = le16_to_cpu(ptr_lseq_vecs
[i
]);
1307 cseq_code
= &sequencer_fw
->data
[header
.cseq_code_offset
];
1308 cseq_code_size
= header
.cseq_code_size
;
1309 lseq_code
= &sequencer_fw
->data
[header
.lseq_code_offset
];
1310 lseq_code_size
= header
.lseq_code_size
;
1315 int asd_init_seqs(struct asd_ha_struct
*asd_ha
)
1319 err
= asd_request_firmware(asd_ha
);
1322 asd_printk("Failed to load sequencer firmware file %s, error %d\n",
1323 SAS_RAZOR_SEQUENCER_FW_FILE
, err
);
1327 err
= asd_seq_download_seqs(asd_ha
);
1329 asd_printk("couldn't download sequencers for %s\n",
1330 pci_name(asd_ha
->pcidev
));
1334 asd_seq_setup_seqs(asd_ha
);
1339 int asd_start_seqs(struct asd_ha_struct
*asd_ha
)
1345 err
= asd_seq_start_cseq(asd_ha
);
1347 asd_printk("couldn't start CSEQ for %s\n",
1348 pci_name(asd_ha
->pcidev
));
1352 lseq_mask
= asd_ha
->hw_prof
.enabled_phys
;
1353 for_each_sequencer(lseq_mask
, lseq_mask
, lseq
) {
1354 err
= asd_seq_start_lseq(asd_ha
, lseq
);
1356 asd_printk("coudln't start LSEQ %d for %s\n", lseq
,
1357 pci_name(asd_ha
->pcidev
));
1366 * asd_update_port_links -- update port_map_by_links and phy_is_up
1367 * @sas_phy: pointer to the phy which has been added to a port
1369 * 1) When a link reset has completed and we got BYTES DMAED with a
1370 * valid frame we call this function for that phy, to indicate that
1371 * the phy is up, i.e. we update the phy_is_up in DDB 0. The
1372 * sequencer checks phy_is_up when pending SCBs are to be sent, and
1373 * when an open address frame has been received.
1375 * 2) When we know of ports, we call this function to update the map
1376 * of phys participaing in that port, i.e. we update the
1377 * port_map_by_links in DDB 0. When a HARD_RESET primitive has been
1378 * received, the sequencer disables all phys in that port.
1379 * port_map_by_links is also used as the conn_mask byte in the
1380 * initiator/target port DDB.
1382 void asd_update_port_links(struct asd_ha_struct
*asd_ha
, struct asd_phy
*phy
)
1384 const u8 phy_mask
= (u8
) phy
->asd_port
->phy_mask
;
1388 unsigned long flags
;
1390 spin_lock_irqsave(&asd_ha
->hw_prof
.ddb_lock
, flags
);
1391 for_each_phy(phy_mask
, mask
, i
)
1392 asd_ddbsite_write_byte(asd_ha
, 0,
1393 offsetof(struct asd_ddb_seq_shared
,
1394 port_map_by_links
)+i
,phy_mask
);
1396 for (i
= 0; i
< 12; i
++) {
1397 phy_is_up
= asd_ddbsite_read_byte(asd_ha
, 0,
1398 offsetof(struct asd_ddb_seq_shared
, phy_is_up
));
1399 err
= asd_ddbsite_update_byte(asd_ha
, 0,
1400 offsetof(struct asd_ddb_seq_shared
, phy_is_up
),
1402 phy_is_up
| phy_mask
);
1405 else if (err
== -EFAULT
) {
1406 asd_printk("phy_is_up: parity error in DDB 0\n");
1410 spin_unlock_irqrestore(&asd_ha
->hw_prof
.ddb_lock
, flags
);
1413 asd_printk("couldn't update DDB 0:error:%d\n", err
);
1416 MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE
);