2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (C) 2004-2007 Cavium Networks
7 * Copyright (C) 2008 Wind River Systems
9 #include <linux/init.h>
10 #include <linux/console.h>
11 #include <linux/delay.h>
12 #include <linux/interrupt.h>
14 #include <linux/irq.h>
15 #include <linux/serial.h>
16 #include <linux/types.h>
17 #include <linux/string.h> /* for memset */
18 #include <linux/serial.h>
19 #include <linux/tty.h>
20 #include <linux/time.h>
21 #include <linux/platform_device.h>
22 #include <linux/serial_core.h>
23 #include <linux/serial_8250.h>
24 #include <linux/string.h>
26 #include <asm/processor.h>
27 #include <asm/reboot.h>
28 #include <asm/smp-ops.h>
29 #include <asm/system.h>
30 #include <asm/irq_cpu.h>
31 #include <asm/mipsregs.h>
32 #include <asm/bootinfo.h>
33 #include <asm/sections.h>
36 #include <asm/octeon/octeon.h>
38 #ifdef CONFIG_CAVIUM_DECODE_RSL
39 extern void cvmx_interrupt_rsl_decode(void);
40 extern int __cvmx_interrupt_ecc_report_single_bit_errors
;
41 extern void cvmx_interrupt_rsl_enable(void);
44 extern struct plat_smp_ops octeon_smp_ops
;
47 extern void pci_console_init(const char *arg
);
50 #ifdef CONFIG_CAVIUM_RESERVE32
51 extern uint64_t octeon_reserve32_memory
;
53 static unsigned long long MAX_MEMORY
= 512ull << 20;
55 struct octeon_boot_descriptor
*octeon_boot_desc_ptr
;
57 struct cvmx_bootinfo
*octeon_bootinfo
;
58 EXPORT_SYMBOL(octeon_bootinfo
);
60 #ifdef CONFIG_CAVIUM_RESERVE32
61 uint64_t octeon_reserve32_memory
;
62 EXPORT_SYMBOL(octeon_reserve32_memory
);
65 static int octeon_uart
;
67 extern asmlinkage
void handle_int(void);
68 extern asmlinkage
void plat_irq_dispatch(void);
71 * Return non zero if we are currently running in the Octeon simulator
75 int octeon_is_simulation(void)
77 return octeon_bootinfo
->board_type
== CVMX_BOARD_TYPE_SIM
;
79 EXPORT_SYMBOL(octeon_is_simulation
);
82 * Return true if Octeon is in PCI Host mode. This means
83 * Linux can control the PCI bus.
85 * Returns Non zero if Octeon in host mode.
87 int octeon_is_pci_host(void)
90 return octeon_bootinfo
->config_flags
& CVMX_BOOTINFO_CFG_FLAG_PCI_HOST
;
97 * Get the clock rate of Octeon
99 * Returns Clock rate in HZ
101 uint64_t octeon_get_clock_rate(void)
103 if (octeon_is_simulation())
104 octeon_bootinfo
->eclock_hz
= 6000000;
105 return octeon_bootinfo
->eclock_hz
;
107 EXPORT_SYMBOL(octeon_get_clock_rate
);
110 * Write to the LCD display connected to the bootbus. This display
111 * exists on most Cavium evaluation boards. If it doesn't exist, then
112 * this function doesn't do anything.
114 * @s: String to write
116 void octeon_write_lcd(const char *s
)
118 if (octeon_bootinfo
->led_display_base_addr
) {
119 void __iomem
*lcd_address
=
120 ioremap_nocache(octeon_bootinfo
->led_display_base_addr
,
123 for (i
= 0; i
< 8; i
++, s
++) {
125 iowrite8(*s
, lcd_address
+ i
);
127 iowrite8(' ', lcd_address
+ i
);
129 iounmap(lcd_address
);
134 * Return the console uart passed by the bootloader
136 * Returns uart (0 or 1)
138 int octeon_get_boot_uart(void)
141 #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
144 uart
= (octeon_boot_desc_ptr
->flags
& OCTEON_BL_FLAG_CONSOLE_UART1
) ?
151 * Get the coremask Linux was booted on.
155 int octeon_get_boot_coremask(void)
157 return octeon_boot_desc_ptr
->core_mask
;
161 * Check the hardware BIST results for a CPU
163 void octeon_check_cpu_bist(void)
165 const int coreid
= cvmx_get_core_num();
166 unsigned long long mask
;
167 unsigned long long bist_val
;
169 /* Check BIST results for COP0 registers */
170 mask
= 0x1f00000000ull
;
171 bist_val
= read_octeon_c0_icacheerr();
173 pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",
176 bist_val
= read_octeon_c0_dcacheerr();
178 pr_err("Core%d L1 Dcache parity error: "
179 "CacheErr(dcache) = 0x%llx\n",
182 mask
= 0xfc00000000000000ull
;
183 bist_val
= read_c0_cvmmemctl();
185 pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",
188 write_octeon_c0_dcacheerr(0);
191 #ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
193 * Called on every core to setup the wired tlb entry needed
194 * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
197 static void octeon_hal_setup_per_cpu_reserved32(void *unused
)
200 * The config has selected to wire the reserve32 memory for all
201 * userspace applications. We need to put a wired TLB entry in for each
202 * 512MB of reserve32 memory. We only handle double 256MB pages here,
203 * so reserve32 must be multiple of 512MB.
205 uint32_t size
= CONFIG_CAVIUM_RESERVE32
;
207 0x7 | ((octeon_reserve32_memory
& ((1ul << 40) - 1)) >> 6);
208 uint32_t entrylo1
= entrylo0
+ (256 << 14);
209 uint32_t entryhi
= (0x80000000UL
- (CONFIG_CAVIUM_RESERVE32
<< 20));
210 while (size
>= 512) {
212 pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
213 smp_processor_id(), entryhi
);
215 add_wired_entry(entrylo0
, entrylo1
, entryhi
, PM_256M
);
216 entrylo0
+= 512 << 14;
217 entrylo1
+= 512 << 14;
218 entryhi
+= 512 << 20;
222 #endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
225 * Called to release the named block which was used to made sure
226 * that nobody used the memory for something else during
227 * init. Now we'll free it so userspace apps can use this
228 * memory region with bootmem_alloc.
230 * This function is called only once from prom_free_prom_memory().
232 void octeon_hal_setup_reserved32(void)
234 #ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
235 on_each_cpu(octeon_hal_setup_per_cpu_reserved32
, NULL
, 0, 1);
242 * @command: Command to pass to the bootloader. Currently ignored.
244 static void octeon_restart(char *command
)
246 /* Disable all watchdogs before soft reset. They don't get cleared */
249 for_each_online_cpu(cpu
)
250 cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu
)), 0);
252 cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
257 cvmx_write_csr(CVMX_CIU_SOFT_RST
, 1);
262 * Permanently stop a core.
266 static void octeon_kill_core(void *arg
)
269 if (octeon_is_simulation()) {
270 /* The simulator needs the watchdog to stop for dead cores */
271 cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
272 /* A break instruction causes the simulator stop a core */
273 asm volatile ("sync\nbreak");
281 static void octeon_halt(void)
283 smp_call_function(octeon_kill_core
, NULL
, 0);
285 switch (octeon_bootinfo
->board_type
) {
286 case CVMX_BOARD_TYPE_NAO38
:
287 /* Driving a 1 to GPIO 12 shuts off this board */
288 cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1);
289 cvmx_write_csr(CVMX_GPIO_TX_SET
, 0x1000);
292 octeon_write_lcd("PowerOff");
296 octeon_kill_core(NULL
);
301 * Platform time init specifics.
304 void __init
plat_time_init(void)
306 /* Nothing special here, but we are required to have one */
312 * Handle all the error condition interrupts that might occur.
315 #ifdef CONFIG_CAVIUM_DECODE_RSL
316 static irqreturn_t
octeon_rlm_interrupt(int cpl
, void *dev_id
)
318 cvmx_interrupt_rsl_decode();
324 * Return a string representing the system type
328 const char *octeon_board_type_string(void)
330 static char name
[80];
331 sprintf(name
, "%s (%s)",
332 cvmx_board_type_to_string(octeon_bootinfo
->board_type
),
333 octeon_model_get_string(read_c0_prid()));
337 const char *get_system_type(void)
338 __attribute__ ((alias("octeon_board_type_string")));
340 void octeon_user_io_init(void)
342 union octeon_cvmemctl cvmmemctl
;
343 union cvmx_iob_fau_timeout fau_timeout
;
344 union cvmx_pow_nw_tim nm_tim
;
347 /* Get the current settings for CP0_CVMMEMCTL_REG */
348 cvmmemctl
.u64
= read_c0_cvmmemctl();
349 /* R/W If set, marked write-buffer entries time out the same
350 * as as other entries; if clear, marked write-buffer entries
351 * use the maximum timeout. */
352 cvmmemctl
.s
.dismarkwblongto
= 1;
353 /* R/W If set, a merged store does not clear the write-buffer
354 * entry timeout state. */
355 cvmmemctl
.s
.dismrgclrwbto
= 0;
356 /* R/W Two bits that are the MSBs of the resultant CVMSEG LM
357 * word location for an IOBDMA. The other 8 bits come from the
358 * SCRADDR field of the IOBDMA. */
359 cvmmemctl
.s
.iobdmascrmsb
= 0;
360 /* R/W If set, SYNCWS and SYNCS only order marked stores; if
361 * clear, SYNCWS and SYNCS only order unmarked
362 * stores. SYNCWSMARKED has no effect when DISSYNCWS is
364 cvmmemctl
.s
.syncwsmarked
= 0;
365 /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */
366 cvmmemctl
.s
.dissyncws
= 0;
367 /* R/W If set, no stall happens on write buffer full. */
368 if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2
))
369 cvmmemctl
.s
.diswbfst
= 1;
371 cvmmemctl
.s
.diswbfst
= 0;
372 /* R/W If set (and SX set), supervisor-level loads/stores can
373 * use XKPHYS addresses with <48>==0 */
374 cvmmemctl
.s
.xkmemenas
= 0;
376 /* R/W If set (and UX set), user-level loads/stores can use
377 * XKPHYS addresses with VA<48>==0 */
378 cvmmemctl
.s
.xkmemenau
= 0;
380 /* R/W If set (and SX set), supervisor-level loads/stores can
381 * use XKPHYS addresses with VA<48>==1 */
382 cvmmemctl
.s
.xkioenas
= 0;
384 /* R/W If set (and UX set), user-level loads/stores can use
385 * XKPHYS addresses with VA<48>==1 */
386 cvmmemctl
.s
.xkioenau
= 0;
388 /* R/W If set, all stores act as SYNCW (NOMERGE must be set
389 * when this is set) RW, reset to 0. */
390 cvmmemctl
.s
.allsyncw
= 0;
392 /* R/W If set, no stores merge, and all stores reach the
393 * coherent bus in order. */
394 cvmmemctl
.s
.nomerge
= 0;
395 /* R/W Selects the bit in the counter used for DID time-outs 0
396 * = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is
397 * between 1x and 2x this interval. For example, with
398 * DIDTTO=3, expiration interval is between 16K and 32K. */
399 cvmmemctl
.s
.didtto
= 0;
400 /* R/W If set, the (mem) CSR clock never turns off. */
401 cvmmemctl
.s
.csrckalwys
= 0;
402 /* R/W If set, mclk never turns off. */
403 cvmmemctl
.s
.mclkalwys
= 0;
404 /* R/W Selects the bit in the counter used for write buffer
405 * flush time-outs (WBFLT+11) is the bit position in an
406 * internal counter used to determine expiration. The write
407 * buffer expires between 1x and 2x this interval. For
408 * example, with WBFLT = 0, a write buffer expires between 2K
409 * and 4K cycles after the write buffer entry is allocated. */
410 cvmmemctl
.s
.wbfltime
= 0;
411 /* R/W If set, do not put Istream in the L2 cache. */
412 cvmmemctl
.s
.istrnol2
= 0;
413 /* R/W The write buffer threshold. */
414 cvmmemctl
.s
.wbthresh
= 10;
415 /* R/W If set, CVMSEG is available for loads/stores in
416 * kernel/debug mode. */
417 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
418 cvmmemctl
.s
.cvmsegenak
= 1;
420 cvmmemctl
.s
.cvmsegenak
= 0;
422 /* R/W If set, CVMSEG is available for loads/stores in
423 * supervisor mode. */
424 cvmmemctl
.s
.cvmsegenas
= 0;
425 /* R/W If set, CVMSEG is available for loads/stores in user
427 cvmmemctl
.s
.cvmsegenau
= 0;
428 /* R/W Size of local memory in cache blocks, 54 (6912 bytes)
429 * is max legal value. */
430 cvmmemctl
.s
.lmemsz
= CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
;
433 if (smp_processor_id() == 0)
434 pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
435 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
,
436 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
* 128);
438 write_c0_cvmmemctl(cvmmemctl
.u64
);
440 /* Move the performance counter interrupts to IRQ 6 */
441 cvmctl
= read_c0_cvmctl();
444 write_c0_cvmctl(cvmctl
);
446 /* Set a default for the hardware timeouts */
448 fau_timeout
.s
.tout_val
= 0xfff;
449 /* Disable tagwait FAU timeout */
450 fau_timeout
.s
.tout_enb
= 0;
451 cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT
, fau_timeout
.u64
);
456 cvmx_write_csr(CVMX_POW_NW_TIM
, nm_tim
.u64
);
458 write_octeon_c0_icacheerr(0);
459 write_c0_derraddr1(0);
463 * Early entry point for arch setup
465 void __init
prom_init(void)
467 struct cvmx_sysinfo
*sysinfo
;
468 const int coreid
= cvmx_get_core_num();
471 struct uart_port octeon_port
;
472 #ifdef CONFIG_CAVIUM_RESERVE32
476 * The bootloader passes a pointer to the boot descriptor in
477 * $a3, this is available as fw_arg3.
479 octeon_boot_desc_ptr
= (struct octeon_boot_descriptor
*)fw_arg3
;
481 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->cvmx_desc_vaddr
);
482 cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo
->phy_mem_desc_addr
));
485 * Only enable the LED controller if we're running on a CN38XX, CN58XX,
486 * or CN56XX. The CN30XX and CN31XX don't have an LED controller.
488 if (!octeon_is_simulation() &&
489 octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER
)) {
490 cvmx_write_csr(CVMX_LED_EN
, 0);
491 cvmx_write_csr(CVMX_LED_PRT
, 0);
492 cvmx_write_csr(CVMX_LED_DBG
, 0);
493 cvmx_write_csr(CVMX_LED_PRT_FMT
, 0);
494 cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32);
495 cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32);
496 cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0);
497 cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0);
498 cvmx_write_csr(CVMX_LED_EN
, 1);
500 #ifdef CONFIG_CAVIUM_RESERVE32
502 * We need to temporarily allocate all memory in the reserve32
503 * region. This makes sure the kernel doesn't allocate this
504 * memory when it is getting memory from the
505 * bootloader. Later, after the memory allocations are
506 * complete, the reserve32 will be freed.
508 #ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
509 if (CONFIG_CAVIUM_RESERVE32
& 0x1ff)
510 pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
511 "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
514 addr
= cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32
<< 20,
516 "CAVIUM_RESERVE32", 0);
519 * Allocate memory for RESERVED32 aligned on 2MB boundary. This
520 * is in case we later use hugetlb entries with it.
522 addr
= cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32
<< 20,
524 "CAVIUM_RESERVE32", 0);
527 pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
529 octeon_reserve32_memory
= addr
;
532 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2
533 if (cvmx_read_csr(CVMX_L2D_FUS3
) & (3ull << 34)) {
534 pr_info("Skipping L2 locking due to reduced L2 cache size\n");
536 uint32_t ebase
= read_c0_ebase() & 0x3ffff000;
537 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
539 cvmx_l2c_lock_mem_region(ebase
, 0x100);
541 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION
542 /* General exception */
543 cvmx_l2c_lock_mem_region(ebase
+ 0x180, 0x80);
545 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
546 /* Interrupt handler */
547 cvmx_l2c_lock_mem_region(ebase
+ 0x200, 0x80);
549 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT
550 cvmx_l2c_lock_mem_region(__pa_symbol(handle_int
), 0x100);
551 cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch
), 0x80);
553 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY
554 cvmx_l2c_lock_mem_region(__pa_symbol(memcpy
), 0x480);
559 sysinfo
= cvmx_sysinfo_get();
560 memset(sysinfo
, 0, sizeof(*sysinfo
));
561 sysinfo
->system_dram_size
= octeon_bootinfo
->dram_size
<< 20;
562 sysinfo
->phy_mem_desc_ptr
=
563 cvmx_phys_to_ptr(octeon_bootinfo
->phy_mem_desc_addr
);
564 sysinfo
->core_mask
= octeon_bootinfo
->core_mask
;
565 sysinfo
->exception_base_addr
= octeon_bootinfo
->exception_base_addr
;
566 sysinfo
->cpu_clock_hz
= octeon_bootinfo
->eclock_hz
;
567 sysinfo
->dram_data_rate_hz
= octeon_bootinfo
->dclock_hz
* 2;
568 sysinfo
->board_type
= octeon_bootinfo
->board_type
;
569 sysinfo
->board_rev_major
= octeon_bootinfo
->board_rev_major
;
570 sysinfo
->board_rev_minor
= octeon_bootinfo
->board_rev_minor
;
571 memcpy(sysinfo
->mac_addr_base
, octeon_bootinfo
->mac_addr_base
,
572 sizeof(sysinfo
->mac_addr_base
));
573 sysinfo
->mac_addr_count
= octeon_bootinfo
->mac_addr_count
;
574 memcpy(sysinfo
->board_serial_number
,
575 octeon_bootinfo
->board_serial_number
,
576 sizeof(sysinfo
->board_serial_number
));
577 sysinfo
->compact_flash_common_base_addr
=
578 octeon_bootinfo
->compact_flash_common_base_addr
;
579 sysinfo
->compact_flash_attribute_base_addr
=
580 octeon_bootinfo
->compact_flash_attribute_base_addr
;
581 sysinfo
->led_display_base_addr
= octeon_bootinfo
->led_display_base_addr
;
582 sysinfo
->dfa_ref_clock_hz
= octeon_bootinfo
->dfa_ref_clock_hz
;
583 sysinfo
->bootloader_config_flags
= octeon_bootinfo
->config_flags
;
586 octeon_check_cpu_bist();
588 octeon_uart
= octeon_get_boot_uart();
591 * Disable All CIU Interrupts. The ones we need will be
592 * enabled later. Read the SUM register so we know the write
595 cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid
* 2)), 0);
596 cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid
* 2 + 1)), 0);
597 cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid
* 2)), 0);
598 cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid
* 2 + 1)), 0);
599 cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid
* 2)));
602 octeon_write_lcd("LinuxSMP");
604 octeon_write_lcd("Linux");
607 #ifdef CONFIG_CAVIUM_GDB
609 * When debugging the linux kernel, force the cores to enter
610 * the debug exception handler to break in.
612 if (octeon_get_boot_debug_flag()) {
613 cvmx_write_csr(CVMX_CIU_DINT
, 1 << cvmx_get_core_num());
614 cvmx_read_csr(CVMX_CIU_DINT
);
619 * BIST should always be enabled when doing a soft reset. L2
620 * Cache locking for instance is not cleared unless BIST is
621 * enabled. Unfortunately due to a chip errata G-200 for
622 * Cn38XX and CN31XX, BIST msut be disabled on these parts.
624 if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2
) ||
625 OCTEON_IS_MODEL(OCTEON_CN31XX
))
626 cvmx_write_csr(CVMX_CIU_SOFT_BIST
, 0);
628 cvmx_write_csr(CVMX_CIU_SOFT_BIST
, 1);
630 /* Default to 64MB in the simulator to speed things up */
631 if (octeon_is_simulation())
632 MAX_MEMORY
= 64ull << 20;
635 argc
= octeon_boot_desc_ptr
->argc
;
636 for (i
= 0; i
< argc
; i
++) {
638 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->argv
[i
]);
639 if ((strncmp(arg
, "MEM=", 4) == 0) ||
640 (strncmp(arg
, "mem=", 4) == 0)) {
641 sscanf(arg
+ 4, "%llu", &MAX_MEMORY
);
644 MAX_MEMORY
= 32ull << 30;
645 } else if (strcmp(arg
, "ecc_verbose") == 0) {
646 #ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
647 __cvmx_interrupt_ecc_report_single_bit_errors
= 1;
648 pr_notice("Reporting of single bit ECC errors is "
651 } else if (strlen(arcs_cmdline
) + strlen(arg
) + 1 <
652 sizeof(arcs_cmdline
) - 1) {
653 strcat(arcs_cmdline
, " ");
654 strcat(arcs_cmdline
, arg
);
658 if (strstr(arcs_cmdline
, "console=") == NULL
) {
659 #ifdef CONFIG_GDB_CONSOLE
660 strcat(arcs_cmdline
, " console=gdb");
662 #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
663 strcat(arcs_cmdline
, " console=ttyS0,115200");
665 if (octeon_uart
== 1)
666 strcat(arcs_cmdline
, " console=ttyS1,115200");
668 strcat(arcs_cmdline
, " console=ttyS0,115200");
673 if (octeon_is_simulation()) {
675 * The simulator uses a mtdram device pre filled with
676 * the filesystem. Also specify the calibration delay
677 * to avoid calculating it every time.
679 strcat(arcs_cmdline
, " rw root=1f00"
680 " lpj=60176 slram=root,0x40000000,+1073741824");
683 mips_hpt_frequency
= octeon_get_clock_rate();
685 octeon_init_cvmcount();
687 _machine_restart
= octeon_restart
;
688 _machine_halt
= octeon_halt
;
690 memset(&octeon_port
, 0, sizeof(octeon_port
));
692 * For early_serial_setup we don't set the port type or
695 octeon_port
.flags
= ASYNC_SKIP_TEST
| UPF_SHARE_IRQ
;
696 octeon_port
.iotype
= UPIO_MEM
;
697 /* I/O addresses are every 8 bytes */
698 octeon_port
.regshift
= 3;
699 /* Clock rate of the chip */
700 octeon_port
.uartclk
= mips_hpt_frequency
;
701 octeon_port
.fifosize
= 64;
702 octeon_port
.mapbase
= 0x0001180000000800ull
+ (1024 * octeon_uart
);
703 octeon_port
.membase
= cvmx_phys_to_ptr(octeon_port
.mapbase
);
704 octeon_port
.serial_in
= octeon_serial_in
;
705 octeon_port
.serial_out
= octeon_serial_out
;
706 #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
707 octeon_port
.line
= 0;
709 octeon_port
.line
= octeon_uart
;
711 octeon_port
.irq
= 42 + octeon_uart
;
712 early_serial_setup(&octeon_port
);
714 octeon_user_io_init();
715 register_smp_ops(&octeon_smp_ops
);
718 void __init
plat_mem_setup(void)
720 uint64_t mem_alloc_size
;
726 /* First add the init memory we will be returning. */
727 memory
= __pa_symbol(&__init_begin
) & PAGE_MASK
;
728 mem_alloc_size
= (__pa_symbol(&__init_end
) & PAGE_MASK
) - memory
;
729 if (mem_alloc_size
> 0) {
730 add_memory_region(memory
, mem_alloc_size
, BOOT_MEM_RAM
);
731 total
+= mem_alloc_size
;
735 * The Mips memory init uses the first memory location for
736 * some memory vectors. When SPARSEMEM is in use, it doesn't
737 * verify that the size is big enough for the final
738 * vectors. Making the smallest chuck 4MB seems to be enough
739 * to consistantly work.
741 mem_alloc_size
= 4 << 20;
742 if (mem_alloc_size
> MAX_MEMORY
)
743 mem_alloc_size
= MAX_MEMORY
;
746 * When allocating memory, we want incrementing addresses from
747 * bootmem_alloc so the code in add_memory_region can merge
748 * regions next to each other.
751 while ((boot_mem_map
.nr_map
< BOOT_MEM_MAP_MAX
)
752 && (total
< MAX_MEMORY
)) {
753 #if defined(CONFIG_64BIT) || defined(CONFIG_64BIT_PHYS_ADDR)
754 memory
= cvmx_bootmem_phy_alloc(mem_alloc_size
,
755 __pa_symbol(&__init_end
), -1,
757 CVMX_BOOTMEM_FLAG_NO_LOCKING
);
758 #elif defined(CONFIG_HIGHMEM)
759 memory
= cvmx_bootmem_phy_alloc(mem_alloc_size
, 0, 1ull << 31,
761 CVMX_BOOTMEM_FLAG_NO_LOCKING
);
763 memory
= cvmx_bootmem_phy_alloc(mem_alloc_size
, 0, 512 << 20,
765 CVMX_BOOTMEM_FLAG_NO_LOCKING
);
769 * This function automatically merges address
770 * regions next to each other if they are
771 * received in incrementing order.
773 add_memory_region(memory
, mem_alloc_size
, BOOT_MEM_RAM
);
774 total
+= mem_alloc_size
;
779 cvmx_bootmem_unlock();
781 #ifdef CONFIG_CAVIUM_RESERVE32
783 * Now that we've allocated the kernel memory it is safe to
784 * free the reserved region. We free it here so that builtin
785 * drivers can use the memory.
787 if (octeon_reserve32_memory
)
788 cvmx_bootmem_free_named("CAVIUM_RESERVE32");
789 #endif /* CONFIG_CAVIUM_RESERVE32 */
792 panic("Unable to allocate memory from "
793 "cvmx_bootmem_phy_alloc\n");
797 int prom_putchar(char c
)
801 /* Spin until there is room */
803 lsrval
= cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart
));
804 } while ((lsrval
& 0x20) == 0);
807 cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart
), c
);
811 void prom_free_prom_memory(void)
813 #ifdef CONFIG_CAVIUM_DECODE_RSL
814 cvmx_interrupt_rsl_enable();
816 /* Add an interrupt handler for general failures. */
817 if (request_irq(OCTEON_IRQ_RML
, octeon_rlm_interrupt
, IRQF_SHARED
,
818 "RML/RSL", octeon_rlm_interrupt
)) {
819 panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
823 /* This call is here so that it is performed after any TLB
824 initializations. It needs to be after these in case the
825 CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
826 octeon_hal_setup_reserved32();
829 static struct octeon_cf_data octeon_cf_data
;
831 static int __init
octeon_cf_device_init(void)
833 union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg
;
834 unsigned long base_ptr
, region_base
, region_size
;
835 struct platform_device
*pd
;
836 struct resource cf_resources
[3];
837 unsigned int num_resources
;
841 /* Setup octeon-cf platform device if present. */
843 if (octeon_bootinfo
->major_version
== 1
844 && octeon_bootinfo
->minor_version
>= 1) {
845 if (octeon_bootinfo
->compact_flash_common_base_addr
)
847 octeon_bootinfo
->compact_flash_common_base_addr
;
849 base_ptr
= 0x1d000800;
855 /* Find CS0 region. */
856 for (i
= 0; i
< 8; i
++) {
857 mio_boot_reg_cfg
.u64
= cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i
));
858 region_base
= mio_boot_reg_cfg
.s
.base
<< 16;
859 region_size
= (mio_boot_reg_cfg
.s
.size
+ 1) << 16;
860 if (mio_boot_reg_cfg
.s
.en
&& base_ptr
>= region_base
861 && base_ptr
< region_base
+ region_size
)
865 /* i and i + 1 are CS0 and CS1, both must be less than 8. */
868 octeon_cf_data
.base_region
= i
;
869 octeon_cf_data
.is16bit
= mio_boot_reg_cfg
.s
.width
;
870 octeon_cf_data
.base_region_bias
= base_ptr
- region_base
;
871 memset(cf_resources
, 0, sizeof(cf_resources
));
873 cf_resources
[num_resources
].flags
= IORESOURCE_MEM
;
874 cf_resources
[num_resources
].start
= region_base
;
875 cf_resources
[num_resources
].end
= region_base
+ region_size
- 1;
879 if (!(base_ptr
& 0xfffful
)) {
881 * Boot loader signals availability of DMA (true_ide
882 * mode) by setting low order bits of base_ptr to
886 /* Asume that CS1 immediately follows. */
887 mio_boot_reg_cfg
.u64
=
888 cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i
+ 1));
889 region_base
= mio_boot_reg_cfg
.s
.base
<< 16;
890 region_size
= (mio_boot_reg_cfg
.s
.size
+ 1) << 16;
891 if (!mio_boot_reg_cfg
.s
.en
)
894 cf_resources
[num_resources
].flags
= IORESOURCE_MEM
;
895 cf_resources
[num_resources
].start
= region_base
;
896 cf_resources
[num_resources
].end
= region_base
+ region_size
- 1;
899 octeon_cf_data
.dma_engine
= 0;
900 cf_resources
[num_resources
].flags
= IORESOURCE_IRQ
;
901 cf_resources
[num_resources
].start
= OCTEON_IRQ_BOOTDMA
;
902 cf_resources
[num_resources
].end
= OCTEON_IRQ_BOOTDMA
;
905 octeon_cf_data
.dma_engine
= -1;
908 pd
= platform_device_alloc("pata_octeon_cf", -1);
913 pd
->dev
.platform_data
= &octeon_cf_data
;
915 ret
= platform_device_add_resources(pd
, cf_resources
, num_resources
);
919 ret
= platform_device_add(pd
);
925 platform_device_put(pd
);
929 device_initcall(octeon_cf_device_init
);