include/asm-blackfin/mach-bf537/bfin_serial_5xx.h

   1 #include <linux/serial.h>
   2 #include <asm/dma.h>
   3 #include <asm/portmux.h>
   4
   5 #define NR_PORTS                2
   6
   7 #define OFFSET_THR              0x00    /* Transmit Holding register            */
   8 #define OFFSET_RBR              0x00    /* Receive Buffer register              */
   9 #define OFFSET_DLL              0x00    /* Divisor Latch (Low-Byte)             */
  10 #define OFFSET_IER              0x04    /* Interrupt Enable Register            */
  11 #define OFFSET_DLH              0x04    /* Divisor Latch (High-Byte)            */
  12 #define OFFSET_IIR              0x08    /* Interrupt Identification Register    */
  13 #define OFFSET_LCR              0x0C    /* Line Control Register                */
  14 #define OFFSET_MCR              0x10    /* Modem Control Register               */
  15 #define OFFSET_LSR              0x14    /* Line Status Register                 */
  16 #define OFFSET_MSR              0x18    /* Modem Status Register                */
  17 #define OFFSET_SCR              0x1C    /* SCR Scratch Register                 */
  18 #define OFFSET_GCTL             0x24    /* Global Control Register              */
  19
  20 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
  21 #define UART_GET_DLL(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLL))
  22 #define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
  23 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
  24 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
  25 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
  26 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
  27 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
  28
  29 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
  30 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
  31 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
  32 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
  33 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
  34 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
  35
  36 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
  37 # define CONFIG_SERIAL_BFIN_CTSRTS
  38
  39 # ifndef CONFIG_UART0_CTS_PIN
  40 #  define CONFIG_UART0_CTS_PIN -1
  41 # endif
  42
  43 # ifndef CONFIG_UART0_RTS_PIN
  44 #  define CONFIG_UART0_RTS_PIN -1
  45 # endif
  46
  47 # ifndef CONFIG_UART1_CTS_PIN
  48 #  define CONFIG_UART1_CTS_PIN -1
  49 # endif
  50
  51 # ifndef CONFIG_UART1_RTS_PIN
  52 #  define CONFIG_UART1_RTS_PIN -1
  53 # endif
  54 #endif
  55 /*
  56  * The pin configuration is different from schematic
  57  */
  58 struct bfin_serial_port {
  59         struct uart_port        port;
  60         unsigned int            old_status;
  61 #ifdef CONFIG_SERIAL_BFIN_DMA
  62         int                     tx_done;
  63         int                     tx_count;
  64         struct circ_buf         rx_dma_buf;
  65         struct timer_list       rx_dma_timer;
  66         int                     rx_dma_nrows;
  67         unsigned int            tx_dma_channel;
  68         unsigned int            rx_dma_channel;
  69         struct work_struct      tx_dma_workqueue;
  70 #else
  71         struct work_struct      cts_workqueue;
  72 #endif
  73 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  74         int             cts_pin;
  75         int             rts_pin;
  76 #endif
  77 };
  78
  79 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
  80 struct bfin_serial_res {
  81         unsigned long   uart_base_addr;
  82         int             uart_irq;
  83 #ifdef CONFIG_SERIAL_BFIN_DMA
  84         unsigned int    uart_tx_dma_channel;
  85         unsigned int    uart_rx_dma_channel;
  86 #endif
  87 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  88         int     uart_cts_pin;
  89         int     uart_rts_pin;
  90 #endif
  91 };
  92
  93 struct bfin_serial_res bfin_serial_resource[] = {
  94 #ifdef CONFIG_SERIAL_BFIN_UART0
  95         {
  96         0xFFC00400,
  97         IRQ_UART0_RX,
  98 #ifdef CONFIG_SERIAL_BFIN_DMA
  99         CH_UART0_TX,
 100         CH_UART0_RX,
 101 #endif
 102 #ifdef CONFIG_BFIN_UART0_CTSRTS
 103         CONFIG_UART0_CTS_PIN,
 104         CONFIG_UART0_RTS_PIN,
 105 #endif
 106         },
 107 #endif
 108 #ifdef CONFIG_SERIAL_BFIN_UART1
 109         {
 110         0xFFC02000,
 111         IRQ_UART1_RX,
 112 #ifdef CONFIG_SERIAL_BFIN_DMA
 113         CH_UART1_TX,
 114         CH_UART1_RX,
 115 #endif
 116 #ifdef CONFIG_BFIN_UART1_CTSRTS
 117         CONFIG_UART1_CTS_PIN,
 118         CONFIG_UART1_RTS_PIN,
 119 #endif
 120         },
 121 #endif
 122 };
 123
 124 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 125
 126 #define DRIVER_NAME "bfin-uart"
 127
 128 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 129 {
 130
 131 #ifdef CONFIG_SERIAL_BFIN_UART0
 132         peripheral_request(P_UART0_TX, DRIVER_NAME);
 133         peripheral_request(P_UART0_RX, DRIVER_NAME);
 134 #endif
 135
 136 #ifdef CONFIG_SERIAL_BFIN_UART1
 137         peripheral_request(P_UART1_TX, DRIVER_NAME);
 138         peripheral_request(P_UART1_RX, DRIVER_NAME);
 139 #endif
 140
 141 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 142         if (uart->cts_pin >= 0) {
 143                 gpio_request(uart->cts_pin, DRIVER_NAME);
 144                 gpio_direction_input(uart->cts_pin);
 145         }
 146
 147         if (uart->rts_pin >= 0) {
 148                 gpio_request(uart->rts_pin, DRIVER_NAME);
 149                 gpio_direction_output(uart->rts_pin, 0);
 150         }
 151 #endif
 152 }