include/asm-blackfin/mach-bf548/bfin_serial_5xx.h

   1 #include <linux/serial.h>
   2 #include <asm/dma.h>
   3 #include <asm/portmux.h>
   4
   5 #define NR_PORTS                4
   6
   7 #define OFFSET_DLL              0x00    /* Divisor Latch (Low-Byte)             */
   8 #define OFFSET_DLH              0x04    /* Divisor Latch (High-Byte)            */
   9 #define OFFSET_GCTL             0x08    /* Global Control Register              */
  10 #define OFFSET_LCR              0x0C    /* Line Control Register                */
  11 #define OFFSET_MCR              0x10    /* Modem Control Register               */
  12 #define OFFSET_LSR              0x14    /* Line Status Register                 */
  13 #define OFFSET_MSR              0x18    /* Modem Status Register                */
  14 #define OFFSET_SCR              0x1C    /* SCR Scratch Register                 */
  15 #define OFFSET_IER_SET          0x20    /* Set Interrupt Enable Register        */
  16 #define OFFSET_IER_CLEAR        0x24    /* Clear Interrupt Enable Register      */
  17 #define OFFSET_THR              0x28    /* Transmit Holding register            */
  18 #define OFFSET_RBR              0x2C    /* Receive Buffer register              */
  19
  20 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
  21 #define UART_GET_DLL(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLL))
  22 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
  23 #define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
  24 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
  25 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
  26 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
  27
  28 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
  29 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
  30 #define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
  31 #define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
  32 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
  33 #define UART_PUT_LSR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
  34 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
  35 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
  36
  37 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
  38 # define CONFIG_SERIAL_BFIN_CTSRTS
  39
  40 # ifndef CONFIG_UART0_CTS_PIN
  41 #  define CONFIG_UART0_CTS_PIN -1
  42 # endif
  43
  44 # ifndef CONFIG_UART0_RTS_PIN
  45 #  define CONFIG_UART0_RTS_PIN -1
  46 # endif
  47
  48 # ifndef CONFIG_UART1_CTS_PIN
  49 #  define CONFIG_UART1_CTS_PIN -1
  50 # endif
  51
  52 # ifndef CONFIG_UART1_RTS_PIN
  53 #  define CONFIG_UART1_RTS_PIN -1
  54 # endif
  55 #endif
  56 /*
  57  * The pin configuration is different from schematic
  58  */
  59 struct bfin_serial_port {
  60         struct uart_port        port;
  61         unsigned int            old_status;
  62 #ifdef CONFIG_SERIAL_BFIN_DMA
  63         int                     tx_done;
  64         int                     tx_count;
  65         struct circ_buf         rx_dma_buf;
  66         struct timer_list       rx_dma_timer;
  67         int                     rx_dma_nrows;
  68         unsigned int            tx_dma_channel;
  69         unsigned int            rx_dma_channel;
  70         struct work_struct      tx_dma_workqueue;
  71 #else
  72         struct work_struct      cts_workqueue;
  73 #endif
  74 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  75         int             cts_pin;
  76         int             rts_pin;
  77 #endif
  78 };
  79
  80 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
  81 struct bfin_serial_res {
  82         unsigned long   uart_base_addr;
  83         int             uart_irq;
  84 #ifdef CONFIG_SERIAL_BFIN_DMA
  85         unsigned int    uart_tx_dma_channel;
  86         unsigned int    uart_rx_dma_channel;
  87 #endif
  88 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  89         int     uart_cts_pin;
  90         int     uart_rts_pin;
  91 #endif
  92 };
  93
  94 struct bfin_serial_res bfin_serial_resource[] = {
  95 #ifdef CONFIG_SERIAL_BFIN_UART0
  96         {
  97         0xFFC00400,
  98         IRQ_UART0_RX,
  99 #ifdef CONFIG_SERIAL_BFIN_DMA
 100         CH_UART0_TX,
 101         CH_UART0_RX,
 102 #endif
 103 #ifdef CONFIG_BFIN_UART0_CTSRTS
 104         CONFIG_UART0_CTS_PIN,
 105         CONFIG_UART0_RTS_PIN,
 106 #endif
 107         },
 108 #endif
 109 #ifdef CONFIG_SERIAL_BFIN_UART1
 110         {
 111         0xFFC02000,
 112         IRQ_UART1_RX,
 113 #ifdef CONFIG_SERIAL_BFIN_DMA
 114         CH_UART1_TX,
 115         CH_UART1_RX,
 116 #endif
 117         },
 118 #endif
 119 #ifdef CONFIG_SERIAL_BFIN_UART2
 120         {
 121         0xFFC02100,
 122         IRQ_UART2_RX,
 123 #ifdef CONFIG_SERIAL_BFIN_DMA
 124         CH_UART2_TX,
 125         CH_UART2_RX,
 126 #endif
 127 #ifdef CONFIG_BFIN_UART2_CTSRTS
 128         CONFIG_UART2_CTS_PIN,
 129         CONFIG_UART2_RTS_PIN,
 130 #endif
 131         },
 132 #endif
 133 #ifdef CONFIG_SERIAL_BFIN_UART3
 134         {
 135         0xFFC03100,
 136         IRQ_UART3_RX,
 137 #ifdef CONFIG_SERIAL_BFIN_DMA
 138         CH_UART3_TX,
 139         CH_UART3_RX,
 140 #endif
 141         },
 142 #endif
 143 };
 144
 145 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 146
 147 #define DRIVER_NAME "bfin-uart"
 148
 149 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 150 {
 151 #ifdef CONFIG_SERIAL_BFIN_UART0
 152         peripheral_request(P_UART0_TX, DRIVER_NAME);
 153         peripheral_request(P_UART0_RX, DRIVER_NAME);
 154 #endif
 155
 156 #ifdef CONFIG_SERIAL_BFIN_UART1
 157         peripheral_request(P_UART1_TX, DRIVER_NAME);
 158         peripheral_request(P_UART1_RX, DRIVER_NAME);
 159
 160 #ifdef CONFIG_BFIN_UART1_CTSRTS
 161         peripheral_request(P_UART1_RTS, DRIVER_NAME);
 162         peripheral_request(P_UART1_CTS DRIVER_NAME);
 163 #endif
 164 #endif
 165
 166 #ifdef CONFIG_SERIAL_BFIN_UART2
 167         peripheral_request(P_UART2_TX, DRIVER_NAME);
 168         peripheral_request(P_UART2_RX, DRIVER_NAME);
 169 #endif
 170
 171 #ifdef CONFIG_SERIAL_BFIN_UART3
 172         peripheral_request(P_UART3_TX, DRIVER_NAME);
 173         peripheral_request(P_UART3_RX, DRIVER_NAME);
 174
 175 #ifdef CONFIG_BFIN_UART3_CTSRTS
 176         peripheral_request(P_UART3_RTS, DRIVER_NAME);
 177         peripheral_request(P_UART3_CTS DRIVER_NAME);
 178 #endif
 179 #endif
 180         SSYNC();
 181 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 182         if (uart->cts_pin >= 0) {
 183                 gpio_request(uart->cts_pin, DRIVER_NAME);
 184                 gpio_direction_input(uart->cts_pin);
 185         }
 186
 187         if (uart->rts_pin >= 0) {
 188                 gpio_request(uart->rts_pin, DRIVER_NAME);
 189                 gpio_direction_output(uart->rts_pin, 0);
 190         }
 191 #endif
 192 }