include/asm-m32r/mappi2/mappi2_pld.h

   1 #ifndef _MAPPI2_PLD_H
   2 #define _MAPPI2_PLD_H
   3
   4 /*
   5  * include/asm-m32r/mappi2/mappi2_pld.h
   6  *
   7  * Definitions for Extended IO Logic on MAPPI2 board.
   8  *  based on m32700ut_pld.h
   9  *
  10  * This file is subject to the terms and conditions of the GNU General
  11  * Public License.  See the file "COPYING" in the main directory of
  12  * this archive for more details.
  13  */
  14
  15 #ifndef __ASSEMBLY__
  16 /* FIXME:
  17  * Some C functions use non-cache address, so can't define non-cache address.
  18  */
  19 #define PLD_BASE                (0x10c00000 /* + NONCACHE_OFFSET */)
  20 #define __reg8                  (volatile unsigned char *)
  21 #define __reg16                 (volatile unsigned short *)
  22 #define __reg32                 (volatile unsigned int *)
  23 #else
  24 #define PLD_BASE                (0x10c00000 + NONCACHE_OFFSET)
  25 #define __reg8
  26 #define __reg16
  27 #define __reg32
  28 #endif /* __ASSEMBLY__ */
  29
  30 /* CFC */
  31 #define PLD_CFRSTCR             __reg16(PLD_BASE + 0x0000)
  32 #define PLD_CFSTS               __reg16(PLD_BASE + 0x0002)
  33 #define PLD_CFIMASK             __reg16(PLD_BASE + 0x0004)
  34 #define PLD_CFBUFCR             __reg16(PLD_BASE + 0x0006)
  35 #define PLD_CFCR0               __reg16(PLD_BASE + 0x000a)
  36 #define PLD_CFCR1               __reg16(PLD_BASE + 0x000c)
  37
  38 /* MMC */
  39 #define PLD_MMCCR               __reg16(PLD_BASE + 0x4000)
  40 #define PLD_MMCMOD              __reg16(PLD_BASE + 0x4002)
  41 #define PLD_MMCSTS              __reg16(PLD_BASE + 0x4006)
  42 #define PLD_MMCBAUR             __reg16(PLD_BASE + 0x400a)
  43 #define PLD_MMCCMDBCUT          __reg16(PLD_BASE + 0x400c)
  44 #define PLD_MMCCDTBCUT          __reg16(PLD_BASE + 0x400e)
  45 #define PLD_MMCDET              __reg16(PLD_BASE + 0x4010)
  46 #define PLD_MMCWP               __reg16(PLD_BASE + 0x4012)
  47 #define PLD_MMCWDATA            __reg16(PLD_BASE + 0x5000)
  48 #define PLD_MMCRDATA            __reg16(PLD_BASE + 0x6000)
  49 #define PLD_MMCCMDDATA          __reg16(PLD_BASE + 0x7000)
  50 #define PLD_MMCRSPDATA          __reg16(PLD_BASE + 0x7006)
  51
  52 /* Power Control of MMC and CF */
  53 #define PLD_CPCR                __reg16(PLD_BASE + 0x14000)
  54
  55
  56 /*==== ICU ====*/
  57 #define  M32R_IRQ_PC104        (5)   /* INT4(PC/104) */
  58 #define  M32R_IRQ_I2C          (28)  /* I2C-BUS     */
  59 #if 1
  60 #define  PLD_IRQ_CFIREQ       (40)  /* CFC Card Interrupt */
  61 #define  PLD_IRQ_CFC_INSERT   (41)  /* CFC Card Insert */
  62 #define  PLD_IRQ_CFC_EJECT    (42)  /* CFC Card Eject */
  63 #define  PLD_IRQ_MMCCARD      (43)  /* MMC Card Insert */
  64 #define  PLD_IRQ_MMCIRQ       (44)  /* MMC Transfer Done */
  65 #else
  66 #define  PLD_IRQ_CFIREQ       (34)  /* CFC Card Interrupt */
  67 #define  PLD_IRQ_CFC_INSERT   (35)  /* CFC Card Insert */
  68 #define  PLD_IRQ_CFC_EJECT    (36)  /* CFC Card Eject */
  69 #define  PLD_IRQ_MMCCARD      (37)  /* MMC Card Insert */
  70 #define  PLD_IRQ_MMCIRQ       (38)  /* MMC Transfer Done */
  71 #endif
  72
  73
  74 #if 0
  75 /* LED Control
  76  *
  77  * 1: DIP swich side
  78  * 2: Reset switch side
  79  */
  80 #define PLD_IOLEDCR             __reg16(PLD_BASE + 0x14002)
  81 #define PLD_IOLED_1_ON          0x001
  82 #define PLD_IOLED_1_OFF         0x000
  83 #define PLD_IOLED_2_ON          0x002
  84 #define PLD_IOLED_2_OFF         0x000
  85
  86 /* DIP Switch
  87  *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
  88  *  1: -
  89  *  2: -
  90  *  3: -
  91  */
  92 #define PLD_IOSWSTS             __reg16(PLD_BASE + 0x14004)
  93 #define PLD_IOSWSTS_IOSW2       0x0200
  94 #define PLD_IOSWSTS_IOSW1       0x0100
  95 #define PLD_IOSWSTS_IOWP0       0x0001
  96
  97 #endif
  98
  99 /* CRC */
 100 #define PLD_CRC7DATA            __reg16(PLD_BASE + 0x18000)
 101 #define PLD_CRC7INDATA          __reg16(PLD_BASE + 0x18002)
 102 #define PLD_CRC16DATA           __reg16(PLD_BASE + 0x18004)
 103 #define PLD_CRC16INDATA         __reg16(PLD_BASE + 0x18006)
 104 #define PLD_CRC16ADATA          __reg16(PLD_BASE + 0x18008)
 105 #define PLD_CRC16AINDATA        __reg16(PLD_BASE + 0x1800a)
 106
 107
 108 #if 0
 109 /* RTC */
 110 #define PLD_RTCCR               __reg16(PLD_BASE + 0x1c000)
 111 #define PLD_RTCBAUR             __reg16(PLD_BASE + 0x1c002)
 112 #define PLD_RTCWRDATA           __reg16(PLD_BASE + 0x1c004)
 113 #define PLD_RTCRDDATA           __reg16(PLD_BASE + 0x1c006)
 114 #define PLD_RTCRSTODT           __reg16(PLD_BASE + 0x1c008)
 115
 116 /* SIO0 */
 117 #define PLD_ESIO0CR             __reg16(PLD_BASE + 0x20000)
 118 #define PLD_ESIO0CR_TXEN        0x0001
 119 #define PLD_ESIO0CR_RXEN        0x0002
 120 #define PLD_ESIO0MOD0           __reg16(PLD_BASE + 0x20002)
 121 #define PLD_ESIO0MOD0_CTSS      0x0040
 122 #define PLD_ESIO0MOD0_RTSS      0x0080
 123 #define PLD_ESIO0MOD1           __reg16(PLD_BASE + 0x20004)
 124 #define PLD_ESIO0MOD1_LMFS      0x0010
 125 #define PLD_ESIO0STS            __reg16(PLD_BASE + 0x20006)
 126 #define PLD_ESIO0STS_TEMP       0x0001
 127 #define PLD_ESIO0STS_TXCP       0x0002
 128 #define PLD_ESIO0STS_RXCP       0x0004
 129 #define PLD_ESIO0STS_TXSC       0x0100
 130 #define PLD_ESIO0STS_RXSC       0x0200
 131 #define PLD_ESIO0STS_TXREADY    (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
 132 #define PLD_ESIO0INTCR          __reg16(PLD_BASE + 0x20008)
 133 #define PLD_ESIO0INTCR_TXIEN    0x0002
 134 #define PLD_ESIO0INTCR_RXCEN    0x0004
 135 #define PLD_ESIO0BAUR           __reg16(PLD_BASE + 0x2000a)
 136 #define PLD_ESIO0TXB            __reg16(PLD_BASE + 0x2000c)
 137 #define PLD_ESIO0RXB            __reg16(PLD_BASE + 0x2000e)
 138
 139 /* SIM Card */
 140 #define PLD_SCCR                __reg16(PLD_BASE + 0x38000)
 141 #define PLD_SCMOD               __reg16(PLD_BASE + 0x38004)
 142 #define PLD_SCSTS               __reg16(PLD_BASE + 0x38006)
 143 #define PLD_SCINTCR             __reg16(PLD_BASE + 0x38008)
 144 #define PLD_SCBAUR              __reg16(PLD_BASE + 0x3800a)
 145 #define PLD_SCTXB               __reg16(PLD_BASE + 0x3800c)
 146 #define PLD_SCRXB               __reg16(PLD_BASE + 0x3800e)
 147
 148 #endif
 149
 150 #endif /* _MAPPI2_PLD.H */