include/asm-v850/fpga85e2c.h

   1 /*
   2  * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
   3  *      FPGA implementation of V850E2/NA85E2C
   4  *
   5  *  Copyright (C) 2002,03  NEC Electronics Corporation
   6  *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
   7  *
   8  * This file is subject to the terms and conditions of the GNU General
   9  * Public License.  See the file COPYING in the main directory of this
  10  * archive for more details.
  11  *
  12  * Written by Miles Bader <miles@gnu.org>
  13  */
  14
  15 #ifndef __V850_FPGA85E2C_H__
  16 #define __V850_FPGA85E2C_H__
  17
  18 #include <asm/v850e2.h>
  19 #include <asm/clinkage.h>
  20
  21
  22 #define CPU_MODEL       "v850e2/fpga85e2c"
  23 #define CPU_MODEL_LONG  "NEC V850E2/NA85E2C"
  24 #define PLATFORM        "fpga85e2c"
  25 #define PLATFORM_LONG   "NA85E2C FPGA implementation"
  26
  27
  28 /* `external ram'.  */
  29 #define ERAM_ADDR               0
  30 #define ERAM_SIZE               0x00100000 /* 1MB */
  31
  32
  33 /* FPGA specific control registers.  */
  34
  35 /* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
  36    to stop execution.  */
  37 #define FLGREG_ADDR(n)          (0xFFE80100 + 2*(n))
  38 #define FLGREG(n)               (*(volatile unsigned char *)FLGREG_ADDR (n))
  39 #define FLGREG_NUM              2
  40
  41 #define CSDEV_ADDR(n)           (0xFFE80110 + 2*(n))
  42 #define CSDEV(n)                (*(volatile unsigned char *)CSDEV_ADDR (n))
  43
  44
  45 /* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
  46 #define IRQ_RPU(n)              (60 + (n))
  47 #define IRQ_RPU_NUM             4
  48
  49 /* For <asm/irq.h> */
  50 #define NUM_CPU_IRQS            64
  51
  52
  53 /* General-purpose timer.  */
  54 /* control/status register (can only be read/written via bit insns) */
  55 #define RPU_GTMC_ADDR           0xFFFFFB00
  56 #define RPU_GTMC                (*(volatile unsigned char *)RPU_GTMC_ADDR)
  57 #define RPU_GTMC_CE_BIT         7 /* clock enable (control) */
  58 #define RPU_GTMC_OV_BIT         6 /* overflow (status) */
  59 #define RPU_GTMC_CLK_BIT        1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
  60 /* 32-bit count (8 least-significant bits are always zero).  */
  61 #define RPU_GTM_ADDR            0xFFFFFB28
  62 #define RPU_GTM                 (*(volatile unsigned long *)RPU_GTMC_ADDR)
  63
  64
  65 /* For <asm/page.h> */
  66 #define PAGE_OFFSET             ERAM_ADDR /* minimum allocatable address */
  67
  68
  69 /* For <asm/entry.h> */
  70 /* `R0 RAM', used for a few miscellaneous variables that must be accessible
  71    using a load instruction relative to R0.  The FPGA implementation
  72    actually has no on-chip RAM, so we use part of main ram just after the
  73    interrupt vectors.  */
  74 #ifdef __ASSEMBLY__
  75 #define R0_RAM_ADDR             lo(C_SYMBOL_NAME(_r0_ram))
  76 #else
  77 extern char _r0_ram;
  78 #define R0_RAM_ADDR             ((unsigned long)&_r0_ram);
  79 #endif
  80
  81
  82 #endif /* __V850_FPGA85E2C_H__ */