include/asm-generic/pgtable.h

   1 #ifndef _ASM_GENERIC_PGTABLE_H
   2 #define _ASM_GENERIC_PGTABLE_H
   3
   4 #ifndef __HAVE_ARCH_PTEP_ESTABLISH
   5 /*
   6  * Establish a new mapping:
   7  *  - flush the old one
   8  *  - update the page tables
   9  *  - inform the TLB about the new one
  10  *
  11  * We hold the mm semaphore for reading, and the pte lock.
  12  *
  13  * Note: the old pte is known to not be writable, so we don't need to
  14  * worry about dirty bits etc getting lost.
  15  */
  16 #ifndef __HAVE_ARCH_SET_PTE_ATOMIC
  17 #define ptep_establish(__vma, __address, __ptep, __entry)               \
  18 do {                                                                    \
  19         set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry);       \
  20         flush_tlb_page(__vma, __address);                               \
  21 } while (0)
  22 #else /* __HAVE_ARCH_SET_PTE_ATOMIC */
  23 #define ptep_establish(__vma, __address, __ptep, __entry)               \
  24 do {                                                                    \
  25         set_pte_atomic(__ptep, __entry);                                \
  26         flush_tlb_page(__vma, __address);                               \
  27 } while (0)
  28 #endif /* __HAVE_ARCH_SET_PTE_ATOMIC */
  29 #endif
  30
  31 #ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
  32 /*
  33  * Largely same as above, but only sets the access flags (dirty,
  34  * accessed, and writable). Furthermore, we know it always gets set
  35  * to a "more permissive" setting, which allows most architectures
  36  * to optimize this.
  37  */
  38 #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
  39 do {                                                                      \
  40         set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry);         \
  41         flush_tlb_page(__vma, __address);                                 \
  42 } while (0)
  43 #endif
  44
  45 #ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
  46 #define ptep_test_and_clear_young(__vma, __address, __ptep)             \
  47 ({                                                                      \
  48         pte_t __pte = *(__ptep);                                        \
  49         int r = 1;                                                      \
  50         if (!pte_young(__pte))                                          \
  51                 r = 0;                                                  \
  52         else                                                            \
  53                 set_pte_at((__vma)->vm_mm, (__address),                 \
  54                            (__ptep), pte_mkold(__pte));                 \
  55         r;                                                              \
  56 })
  57 #endif
  58
  59 #ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
  60 #define ptep_clear_flush_young(__vma, __address, __ptep)                \
  61 ({                                                                      \
  62         int __young;                                                    \
  63         __young = ptep_test_and_clear_young(__vma, __address, __ptep);  \
  64         if (__young)                                                    \
  65                 flush_tlb_page(__vma, __address);                       \
  66         __young;                                                        \
  67 })
  68 #endif
  69
  70 #ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
  71 #define ptep_test_and_clear_dirty(__vma, __address, __ptep)             \
  72 ({                                                                      \
  73         pte_t __pte = *__ptep;                                          \
  74         int r = 1;                                                      \
  75         if (!pte_dirty(__pte))                                          \
  76                 r = 0;                                                  \
  77         else                                                            \
  78                 set_pte_at((__vma)->vm_mm, (__address), (__ptep),       \
  79                            pte_mkclean(__pte));                         \
  80         r;                                                              \
  81 })
  82 #endif
  83
  84 #ifndef __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
  85 #define ptep_clear_flush_dirty(__vma, __address, __ptep)                \
  86 ({                                                                      \
  87         int __dirty;                                                    \
  88         __dirty = ptep_test_and_clear_dirty(__vma, __address, __ptep);  \
  89         if (__dirty)                                                    \
  90                 flush_tlb_page(__vma, __address);                       \
  91         __dirty;                                                        \
  92 })
  93 #endif
  94
  95 #ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
  96 #define ptep_get_and_clear(__mm, __address, __ptep)                     \
  97 ({                                                                      \
  98         pte_t __pte = *(__ptep);                                        \
  99         pte_clear((__mm), (__address), (__ptep));                       \
 100         __pte;                                                          \
 101 })
 102 #endif
 103
 104 #ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
 105 #define ptep_get_and_clear_full(__mm, __address, __ptep, __full)        \
 106 ({                                                                      \
 107         pte_t __pte;                                                    \
 108         __pte = ptep_get_and_clear((__mm), (__address), (__ptep));      \
 109         __pte;                                                          \
 110 })
 111 #endif
 112
 113 #ifndef __HAVE_ARCH_PTE_CLEAR_FULL
 114 #define pte_clear_full(__mm, __address, __ptep, __full)                 \
 115 do {                                                                    \
 116         pte_clear((__mm), (__address), (__ptep));                       \
 117 } while (0)
 118 #endif
 119
 120 #ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
 121 #define ptep_clear_flush(__vma, __address, __ptep)                      \
 122 ({                                                                      \
 123         pte_t __pte;                                                    \
 124         __pte = ptep_get_and_clear((__vma)->vm_mm, __address, __ptep);  \
 125         flush_tlb_page(__vma, __address);                               \
 126         __pte;                                                          \
 127 })
 128 #endif
 129
 130 #ifndef __HAVE_ARCH_PTEP_SET_WRPROTECT
 131 struct mm_struct;
 132 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
 133 {
 134         pte_t old_pte = *ptep;
 135         set_pte_at(mm, address, ptep, pte_wrprotect(old_pte));
 136 }
 137 #endif
 138
 139 #ifndef __HAVE_ARCH_PTE_SAME
 140 #define pte_same(A,B)   (pte_val(A) == pte_val(B))
 141 #endif
 142
 143 #ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY
 144 #define page_test_and_clear_dirty(page) (0)
 145 #define pte_maybe_dirty(pte)            pte_dirty(pte)
 146 #else
 147 #define pte_maybe_dirty(pte)            (1)
 148 #endif
 149
 150 #ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
 151 #define page_test_and_clear_young(page) (0)
 152 #endif
 153
 154 #ifndef __HAVE_ARCH_PGD_OFFSET_GATE
 155 #define pgd_offset_gate(mm, addr)       pgd_offset(mm, addr)
 156 #endif
 157
 158 #ifndef __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
 159 #define lazy_mmu_prot_update(pte)       do { } while (0)
 160 #endif
 161
 162 #ifndef __HAVE_ARCH_MULTIPLE_ZERO_PAGE
 163 #define move_pte(pte, prot, old_addr, new_addr) (pte)
 164 #else
 165 #define move_pte(pte, prot, old_addr, new_addr)                         \
 166 ({                                                                      \
 167         pte_t newpte = (pte);                                           \
 168         if (pte_present(pte) && pfn_valid(pte_pfn(pte)) &&              \
 169                         pte_page(pte) == ZERO_PAGE(old_addr))           \
 170                 newpte = mk_pte(ZERO_PAGE(new_addr), (prot));           \
 171         newpte;                                                         \
 172 })
 173 #endif
 174
 175 /*
 176  * When walking page tables, get the address of the next boundary,
 177  * or the end address of the range if that comes earlier.  Although no
 178  * vma end wraps to 0, rounded up __boundary may wrap to 0 throughout.
 179  */
 180
 181 #define pgd_addr_end(addr, end)                                         \
 182 ({      unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;  \
 183         (__boundary - 1 < (end) - 1)? __boundary: (end);                \
 184 })
 185
 186 #ifndef pud_addr_end
 187 #define pud_addr_end(addr, end)                                         \
 188 ({      unsigned long __boundary = ((addr) + PUD_SIZE) & PUD_MASK;      \
 189         (__boundary - 1 < (end) - 1)? __boundary: (end);                \
 190 })
 191 #endif
 192
 193 #ifndef pmd_addr_end
 194 #define pmd_addr_end(addr, end)                                         \
 195 ({      unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;      \
 196         (__boundary - 1 < (end) - 1)? __boundary: (end);                \
 197 })
 198 #endif
 199
 200 #ifndef __ASSEMBLY__
 201 /*
 202  * When walking page tables, we usually want to skip any p?d_none entries;
 203  * and any p?d_bad entries - reporting the error before resetting to none.
 204  * Do the tests inline, but report and clear the bad entry in mm/memory.c.
 205  */
 206 void pgd_clear_bad(pgd_t *);
 207 void pud_clear_bad(pud_t *);
 208 void pmd_clear_bad(pmd_t *);
 209
 210 static inline int pgd_none_or_clear_bad(pgd_t *pgd)
 211 {
 212         if (pgd_none(*pgd))
 213                 return 1;
 214         if (unlikely(pgd_bad(*pgd))) {
 215                 pgd_clear_bad(pgd);
 216                 return 1;
 217         }
 218         return 0;
 219 }
 220
 221 static inline int pud_none_or_clear_bad(pud_t *pud)
 222 {
 223         if (pud_none(*pud))
 224                 return 1;
 225         if (unlikely(pud_bad(*pud))) {
 226                 pud_clear_bad(pud);
 227                 return 1;
 228         }
 229         return 0;
 230 }
 231
 232 static inline int pmd_none_or_clear_bad(pmd_t *pmd)
 233 {
 234         if (pmd_none(*pmd))
 235                 return 1;
 236         if (unlikely(pmd_bad(*pmd))) {
 237                 pmd_clear_bad(pmd);
 238                 return 1;
 239         }
 240         return 0;
 241 }
 242 #endif /* !__ASSEMBLY__ */
 243
 244 #endif /* _ASM_GENERIC_PGTABLE_H */