drivers/scsi/aic94xx/aic94xx_sas.h

   1 /*
   2  * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
   3  *
   4  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6  *
   7  * This file is licensed under GPLv2.
   8  *
   9  * This file is part of the aic94xx driver.
  10  *
  11  * The aic94xx driver is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; version 2 of the
  14  * License.
  15  *
  16  * The aic94xx driver is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  19  * General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with the aic94xx driver; if not, write to the Free Software
  23  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  24  *
  25  */
  26
  27 #ifndef _AIC94XX_SAS_H_
  28 #define _AIC94XX_SAS_H_
  29
  30 #include <scsi/libsas.h>
  31
  32 /* ---------- DDBs ---------- */
  33 /* DDBs are device descriptor blocks which describe a device in the
  34  * domain that this sequencer can maintain low-level connections for
  35  * us.  They are be 64 bytes.
  36  */
  37
  38 struct asd_ddb_ssp_smp_target_port {
  39         u8     conn_type;         /* byte 0 */
  40 #define DDB_TP_CONN_TYPE 0x81     /* Initiator port and addr frame type 0x01 */
  41
  42         u8     conn_rate;
  43         __be16 init_conn_tag;
  44         u8     dest_sas_addr[8];  /* bytes 4-11 */
  45
  46         __le16 send_queue_head;
  47         u8     sq_suspended;
  48         u8     ddb_type;          /* DDB_TYPE_TARGET */
  49 #define DDB_TYPE_UNUSED    0xFF
  50 #define DDB_TYPE_TARGET    0xFE
  51 #define DDB_TYPE_INITIATOR 0xFD
  52 #define DDB_TYPE_PM_PORT   0xFC
  53
  54         __le16 _r_a;
  55         __be16 awt_def;
  56
  57         u8     compat_features;   /* byte 20 */
  58         u8     pathway_blocked_count;
  59         __be16 arb_wait_time;
  60         __be32 more_compat_features; /* byte 24 */
  61
  62         u8     conn_mask;
  63         u8     flags;     /* concurrent conn:2,2 and open:0(1) */
  64 #define CONCURRENT_CONN_SUPP 0x04
  65 #define OPEN_REQUIRED        0x01
  66
  67         u16    _r_b;
  68         __le16 exec_queue_tail;
  69         __le16 send_queue_tail;
  70         __le16 sister_ddb;
  71
  72         __le16 _r_c;
  73
  74         u8     max_concurrent_conn;
  75         u8     num_concurrent_conn;
  76         u8     num_contexts;
  77
  78         u8     _r_d;
  79
  80         __le16 active_task_count;
  81
  82         u8     _r_e[9];
  83
  84         u8     itnl_reason;       /* I_T nexus loss reason */
  85
  86         __le16 _r_f;
  87
  88         __le16 itnl_timeout;
  89 #define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
  90
  91         __le32 itnl_timestamp;
  92 } __attribute__ ((packed));
  93
  94 struct asd_ddb_stp_sata_target_port {
  95         u8     conn_type;         /* byte 0 */
  96         u8     conn_rate;
  97         __be16 init_conn_tag;
  98         u8     dest_sas_addr[8];  /* bytes 4-11 */
  99
 100         __le16 send_queue_head;
 101         u8     sq_suspended;
 102         u8     ddb_type;          /* DDB_TYPE_TARGET */
 103
 104         __le16 _r_a;
 105
 106         __be16 awt_def;
 107         u8     compat_features;   /* byte 20 */
 108         u8     pathway_blocked_count;
 109         __be16 arb_wait_time;
 110         __be32 more_compat_features; /* byte 24 */
 111
 112         u8     conn_mask;
 113         u8     flags;     /* concurrent conn:2,2 and open:0(1) */
 114 #define SATA_MULTIPORT     0x80
 115 #define SUPPORTS_AFFIL     0x40
 116 #define STP_AFFIL_POL      0x20
 117
 118         u8     _r_b;
 119         u8     flags2;            /* STP close policy:0 */
 120 #define STP_CL_POL_NO_TX    0x00
 121 #define STP_CL_POL_BTW_CMDS 0x01
 122
 123         __le16 exec_queue_tail;
 124         __le16 send_queue_tail;
 125         __le16 sister_ddb;
 126         __le16 ata_cmd_scbptr;
 127         __le32 sata_tag_alloc_mask;
 128         __le16 active_task_count;
 129         __le16 _r_c;
 130         __le32 sata_sactive;
 131         u8     num_sata_tags;
 132         u8     sata_status;
 133         u8     sata_ending_status;
 134         u8     itnl_reason;       /* I_T nexus loss reason */
 135         __le16 ncq_data_scb_ptr;
 136         __le16 itnl_timeout;
 137         __le32 itnl_timestamp;
 138 } __attribute__ ((packed));
 139
 140 /* This struct asd_ddb_init_port, describes the device descriptor block
 141  * of an initiator port (when the sequencer is operating in target mode).
 142  * Bytes [0,11] and [20,27] are from the OPEN address frame.
 143  * The sequencer allocates an initiator port DDB entry.
 144  */
 145 struct asd_ddb_init_port {
 146         u8     conn_type;         /* byte 0 */
 147         u8     conn_rate;
 148         __be16 init_conn_tag;     /* BE */
 149         u8     dest_sas_addr[8];
 150         __le16 send_queue_head;   /* LE, byte 12 */
 151         u8     sq_suspended;
 152         u8     ddb_type;          /* DDB_TYPE_INITIATOR */
 153         __le16 _r_a;
 154         __be16 awt_def;           /* BE */
 155         u8     compat_features;
 156         u8     pathway_blocked_count;
 157         __be16 arb_wait_time;     /* BE */
 158         __be32 more_compat_features; /* BE */
 159         u8     conn_mask;
 160         u8     flags;             /* == 5 */
 161         u16    _r_b;
 162         __le16 exec_queue_tail;   /* execution queue tail */
 163         __le16 send_queue_tail;
 164         __le16 sister_ddb;
 165         __le16 init_resp_timeout; /* initiator response timeout */
 166         __le32 _r_c;
 167         __le16 active_tasks;      /* active task count */
 168         __le16 init_list;         /* initiator list link pointer */
 169         __le32 _r_d;
 170         u8     max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
 171         u8     itnl_reason;       /* I_T nexus loss reason */
 172         __le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
 173         __le16 itnl_to;           /* from the Protocol Specific Port Ctrl MP */
 174         __le32 itnl_timestamp;
 175 } __attribute__ ((packed));
 176
 177 /* This struct asd_ddb_sata_tag, describes a look-up table to be used
 178  * by the sequencers.  SATA II, IDENTIFY DEVICE data, word 76, bit 8:
 179  * NCQ support.  This table is used by the sequencers to find the
 180  * corresponding SCB, given a SATA II tag value.
 181  */
 182 struct asd_ddb_sata_tag {
 183         __le16 scb_pointer[32];
 184 } __attribute__ ((packed));
 185
 186 /* This struct asd_ddb_sata_pm_table, describes a port number to
 187  * connection handle look-up table.  SATA targets attached to a port
 188  * multiplier require a 4-bit port number value.  There is one DDB
 189  * entry of this type for each SATA port multiplier (sister DDB).
 190  * Given a SATA PM port number, this table gives us the SATA PM Port
 191  * DDB of the SATA port multiplier port (i.e. the SATA target
 192  * discovered on the port).
 193  */
 194 struct asd_ddb_sata_pm_table {
 195         __le16 ddb_pointer[16];
 196         __le16 _r_a[16];
 197 } __attribute__ ((packed));
 198
 199 /* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
 200  * port format DDB.
 201  */
 202 struct asd_ddb_sata_pm_port {
 203         u8     _r_a[15];
 204         u8     ddb_type;
 205         u8     _r_b[13];
 206         u8     pm_port_flags;
 207 #define PM_PORT_MASK  0xF0
 208 #define PM_PORT_SET   0x02
 209         u8     _r_c[6];
 210         __le16 sister_ddb;
 211         __le16 ata_cmd_scbptr;
 212         __le32 sata_tag_alloc_mask;
 213         __le16 active_task_count;
 214         __le16 parent_ddb;
 215         __le32 sata_sactive;
 216         u8     num_sata_tags;
 217         u8     sata_status;
 218         u8     sata_ending_status;
 219         u8     _r_d[9];
 220 } __attribute__ ((packed));
 221
 222 /* This struct asd_ddb_seq_shared, describes a DDB shared by the
 223  * central and link sequencers.  port_map_by_links is indexed phy
 224  * number [0,7]; each byte is a bit mask of all the phys that are in
 225  * the same port as the indexed phy.
 226  */
 227 struct asd_ddb_seq_shared {
 228         __le16 q_free_ddb_head;
 229         __le16 q_free_ddb_tail;
 230         __le16 q_free_ddb_cnt;
 231         __le16 q_used_ddb_head;
 232         __le16 q_used_ddb_tail;
 233         __le16 shared_mem_lock;
 234         __le16 smp_conn_tag;
 235         __le16 est_nexus_buf_cnt;
 236         __le16 est_nexus_buf_thresh;
 237         u32    _r_a;
 238         u8     settable_max_contexts;
 239         u8     _r_b[23];
 240         u8     conn_not_active;
 241         u8     phy_is_up;
 242         u8     _r_c[8];
 243         u8     port_map_by_links[8];
 244 } __attribute__ ((packed));
 245
 246 /* ---------- SG Element ---------- */
 247
 248 /* This struct sg_el, describes the hardware scatter gather buffer
 249  * element.  All entries are little endian.  In an SCB, there are 2 of
 250  * this, plus one more, called a link element of this indicating a
 251  * sublist if needed.
 252  *
 253  * A link element has only the bus address set and the flags (DS) bit
 254  * valid.  The bus address points to the start of the sublist.
 255  *
 256  * If a sublist is needed, then that sublist should also include the 2
 257  * sg_el embedded in the SCB, in which case next_sg_offset is 32,
 258  * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
 259  */
 260 struct sg_el {
 261         __le64 bus_addr;
 262         __le32 size;
 263         __le16 _r;
 264         u8     next_sg_offs;
 265         u8     flags;
 266 #define ASD_SG_EL_DS_MASK   0x30
 267 #define ASD_SG_EL_DS_OCM    0x10
 268 #define ASD_SG_EL_DS_HM     0x00
 269 #define ASD_SG_EL_LIST_MASK 0xC0
 270 #define ASD_SG_EL_LIST_EOL  0x40
 271 #define ASD_SG_EL_LIST_EOS  0x80
 272 } __attribute__ ((packed));
 273
 274 /* ---------- SCBs ---------- */
 275
 276 /* An SCB (sequencer control block) is comprised of a common header
 277  * and a task part, for a total of 128 bytes.  All fields are in LE
 278  * order, unless otherwise noted.
 279  */
 280
 281 /* This struct scb_header, defines the SCB header format.
 282  */
 283 struct scb_header {
 284         __le64 next_scb;
 285         __le16 index;             /* transaction context */
 286         u8     opcode;
 287 } __attribute__ ((packed));
 288
 289 /* SCB opcodes: Execution queue
 290  */
 291 #define INITIATE_SSP_TASK       0x00
 292 #define INITIATE_LONG_SSP_TASK  0x01
 293 #define INITIATE_BIDIR_SSP_TASK 0x02
 294 #define ABORT_TASK              0x03
 295 #define INITIATE_SSP_TMF        0x04
 296 #define SSP_TARG_GET_DATA       0x05
 297 #define SSP_TARG_GET_DATA_GOOD  0x06
 298 #define SSP_TARG_SEND_RESP      0x07
 299 #define QUERY_SSP_TASK          0x08
 300 #define INITIATE_ATA_TASK       0x09
 301 #define INITIATE_ATAPI_TASK     0x0a
 302 #define CONTROL_ATA_DEV         0x0b
 303 #define INITIATE_SMP_TASK       0x0c
 304 #define SMP_TARG_SEND_RESP      0x0f
 305
 306 /* SCB opcodes: Send Queue
 307  */
 308 #define SSP_TARG_SEND_DATA      0x40
 309 #define SSP_TARG_SEND_DATA_GOOD 0x41
 310
 311 /* SCB opcodes: Link Queue
 312  */
 313 #define CONTROL_PHY             0x80
 314 #define SEND_PRIMITIVE          0x81
 315 #define INITIATE_LINK_ADM_TASK  0x82
 316
 317 /* SCB opcodes: other
 318  */
 319 #define EMPTY_SCB               0xc0
 320 #define INITIATE_SEQ_ADM_TASK   0xc1
 321 #define EST_ICL_TARG_WINDOW     0xc2
 322 #define COPY_MEM                0xc3
 323 #define CLEAR_NEXUS             0xc4
 324 #define INITIATE_DDB_ADM_TASK   0xc6
 325 #define ESTABLISH_NEXUS_ESCB    0xd0
 326
 327 #define LUN_SIZE                8
 328
 329 /* See SAS spec, task IU
 330  */
 331 struct ssp_task_iu {
 332         u8     lun[LUN_SIZE];     /* BE */
 333         u16    _r_a;
 334         u8     tmf;
 335         u8     _r_b;
 336         __be16 tag;               /* BE */
 337         u8     _r_c[14];
 338 } __attribute__ ((packed));
 339
 340 /* See SAS spec, command IU
 341  */
 342 struct ssp_command_iu {
 343         u8     lun[LUN_SIZE];
 344         u8     _r_a;
 345         u8     efb_prio_attr;     /* enable first burst, task prio & attr */
 346 #define EFB_MASK        0x80
 347 #define TASK_PRIO_MASK  0x78
 348 #define TASK_ATTR_MASK  0x07
 349
 350         u8    _r_b;
 351         u8     add_cdb_len;       /* in dwords, since bit 0,1 are reserved */
 352         union {
 353                 u8     cdb[16];
 354                 struct {
 355                         __le64 long_cdb_addr;     /* bus address, LE */
 356                         __le32 long_cdb_size;     /* LE */
 357                         u8     _r_c[3];
 358                         u8     eol_ds;            /* eol:6,6, ds:5,4 */
 359                 } long_cdb;       /* sequencer extension */
 360         };
 361 } __attribute__ ((packed));
 362
 363 struct xfer_rdy_iu {
 364         __be32 requested_offset;  /* BE */
 365         __be32 write_data_len;    /* BE */
 366         __be32 _r_a;
 367 } __attribute__ ((packed));
 368
 369 /* ---------- SCB tasks ---------- */
 370
 371 /* This is both ssp_task and long_ssp_task
 372  */
 373 struct initiate_ssp_task {
 374         u8     proto_conn_rate;   /* proto:6,4, conn_rate:3,0 */
 375         __le32 total_xfer_len;
 376         struct ssp_frame_hdr  ssp_frame;
 377         struct ssp_command_iu ssp_cmd;
 378         __le16 sister_scb;        /* 0xFFFF */
 379         __le16 conn_handle;       /* index to DDB for the intended target */
 380         u8     data_dir;          /* :1,0 */
 381 #define DATA_DIR_NONE   0x00
 382 #define DATA_DIR_IN     0x01
 383 #define DATA_DIR_OUT    0x02
 384 #define DATA_DIR_BYRECIPIENT 0x03
 385
 386         u8     _r_a;
 387         u8     retry_count;
 388         u8     _r_b[5];
 389         struct sg_el sg_element[3]; /* 2 real and 1 link */
 390 } __attribute__ ((packed));
 391
 392 /* This defines both ata_task and atapi_task.
 393  * ata: C bit of FIS should be 1,
 394  * atapi: C bit of FIS should be 1, and command register should be 0xA0,
 395  * to indicate a packet command.
 396  */
 397 struct initiate_ata_task {
 398         u8     proto_conn_rate;
 399         __le32 total_xfer_len;
 400         struct host_to_dev_fis fis;
 401         __le32 data_offs;
 402         u8     atapi_packet[16];
 403         u8     _r_a[12];
 404         __le16 sister_scb;
 405         __le16 conn_handle;
 406         u8     ata_flags;         /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
 407 #define CSMI_TASK           0x40
 408 #define DATA_XFER_MODE_DMA  0x10
 409 #define ATA_Q_TYPE_MASK     0x08
 410 #define ATA_Q_TYPE_UNTAGGED 0x00
 411 #define ATA_Q_TYPE_NCQ      0x08
 412
 413         u8     _r_b;
 414         u8     retry_count;
 415         u8     _r_c;
 416         u8     flags;
 417 #define STP_AFFIL_POLICY   0x20
 418 #define SET_AFFIL_POLICY   0x10
 419 #define RET_PARTIAL_SGLIST 0x02
 420
 421         u8     _r_d[3];
 422         struct sg_el sg_element[3];
 423 } __attribute__ ((packed));
 424
 425 struct initiate_smp_task {
 426         u8     proto_conn_rate;
 427         u8     _r_a[40];
 428         struct sg_el smp_req;
 429         __le16 sister_scb;
 430         __le16 conn_handle;
 431         u8     _r_c[8];
 432         struct sg_el smp_resp;
 433         u8     _r_d[32];
 434 } __attribute__ ((packed));
 435
 436 struct control_phy {
 437         u8     phy_id;
 438         u8     sub_func;
 439 #define DISABLE_PHY            0x00
 440 #define ENABLE_PHY             0x01
 441 #define RELEASE_SPINUP_HOLD    0x02
 442 #define ENABLE_PHY_NO_SAS_OOB  0x03
 443 #define ENABLE_PHY_NO_SATA_OOB 0x04
 444 #define PHY_NO_OP              0x05
 445 #define EXECUTE_HARD_RESET     0x81
 446
 447         u8     func_mask;
 448         u8     speed_mask;
 449         u8     hot_plug_delay;
 450         u8     port_type;
 451         u8     flags;
 452 #define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
 453 #define DISABLE_PHY_IF_OOB_FAILS       0x02
 454
 455         __le32 timeout_override;
 456         u8     link_reset_retries;
 457         u8     _r_a[47];
 458         __le16 conn_handle;
 459         u8     _r_b[56];
 460 } __attribute__ ((packed));
 461
 462 struct control_ata_dev {
 463         u8     proto_conn_rate;
 464         __le32 _r_a;
 465         struct host_to_dev_fis fis;
 466         u8     _r_b[32];
 467         __le16 sister_scb;
 468         __le16 conn_handle;
 469         u8     ata_flags;         /* 0 */
 470         u8     _r_c[55];
 471 } __attribute__ ((packed));
 472
 473 struct empty_scb {
 474         u8     num_valid;
 475         __le32 _r_a;
 476 #define ASD_EDBS_PER_SCB 7
 477 /* header+data+CRC+DMA suffix data */
 478 #define ASD_EDB_SIZE (24+1024+4+16)
 479         struct sg_el eb[ASD_EDBS_PER_SCB];
 480 #define ELEMENT_NOT_VALID  0xC0
 481 } __attribute__ ((packed));
 482
 483 struct initiate_link_adm {
 484         u8     phy_id;
 485         u8     sub_func;
 486 #define GET_LINK_ERROR_COUNT      0x00
 487 #define RESET_LINK_ERROR_COUNT    0x01
 488 #define ENABLE_NOTIFY_SPINUP_INTS 0x02
 489
 490         u8     _r_a[57];
 491         __le16 conn_handle;
 492         u8     _r_b[56];
 493 } __attribute__ ((packed));
 494
 495 struct copy_memory {
 496         u8     _r_a;
 497         __le16 xfer_len;
 498         __le16 _r_b;
 499         __le64 src_busaddr;
 500         u8     src_ds;            /* See definition of sg_el */
 501         u8     _r_c[45];
 502         __le16 conn_handle;
 503         __le64 _r_d;
 504         __le64 dest_busaddr;
 505         u8     dest_ds;           /* See definition of sg_el */
 506         u8     _r_e[39];
 507 } __attribute__ ((packed));
 508
 509 struct abort_task {
 510         u8     proto_conn_rate;
 511         __le32 _r_a;
 512         struct ssp_frame_hdr ssp_frame;
 513         struct ssp_task_iu ssp_task;
 514         __le16 sister_scb;
 515         __le16 conn_handle;
 516         u8     flags;     /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
 517 #define SUSPEND_DATA_TRANS 0x04
 518
 519         u8     _r_b;
 520         u8     retry_count;
 521         u8     _r_c[5];
 522         __le16 index;  /* Transaction context of task to be queried */
 523         __le16 itnl_to;
 524         u8     _r_d[44];
 525 } __attribute__ ((packed));
 526
 527 struct clear_nexus {
 528         u8     nexus;
 529 #define NEXUS_ADAPTER  0x00
 530 #define NEXUS_PORT     0x01
 531 #define NEXUS_I_T      0x02
 532 #define NEXUS_I_T_L    0x03
 533 #define NEXUS_TAG      0x04
 534 #define NEXUS_TRANS_CX 0x05
 535 #define NEXUS_SATA_TAG 0x06
 536 #define NEXUS_T_L      0x07
 537 #define NEXUS_L        0x08
 538 #define NEXUS_T_TAG    0x09
 539
 540         __le32 _r_a;
 541         u8     flags;
 542 #define SUSPEND_TX     0x80
 543 #define RESUME_TX      0x40
 544 #define SEND_Q         0x04
 545 #define EXEC_Q         0x02
 546 #define NOTINQ         0x01
 547
 548         u8     _r_b[3];
 549         u8     conn_mask;
 550         u8     _r_c[19];
 551         struct ssp_task_iu ssp_task; /* LUN and TAG */
 552         __le16 _r_d;
 553         __le16 conn_handle;
 554         __le64 _r_e;
 555         __le16 index;  /* Transaction context of task to be cleared */
 556         __le16 context;           /* Clear nexus context */
 557         u8     _r_f[44];
 558 } __attribute__ ((packed));
 559
 560 struct initiate_ssp_tmf {
 561         u8     proto_conn_rate;
 562         __le32 _r_a;
 563         struct ssp_frame_hdr ssp_frame;
 564         struct ssp_task_iu ssp_task;
 565         __le16 sister_scb;
 566         __le16 conn_handle;
 567         u8     flags;     /* itnl override and suspend data tx */
 568 #define OVERRIDE_ITNL_TIMER  8
 569
 570         u8     _r_b;
 571         u8     retry_count;
 572         u8     _r_c[5];
 573         __le16 index;  /* Transaction context of task to be queried */
 574         __le16 itnl_to;
 575         u8     _r_d[44];
 576 } __attribute__ ((packed));
 577
 578 /* Transmits an arbitrary primitive on the link.
 579  * Used for NOTIFY and BROADCAST.
 580  */
 581 struct send_prim {
 582         u8     phy_id;
 583         u8     wait_transmit;     /* :0,0 */
 584         u8     xmit_flags;
 585 #define XMTPSIZE_MASK      0xF0
 586 #define XMTPSIZE_SINGLE    0x10
 587 #define XMTPSIZE_REPEATED  0x20
 588 #define XMTPSIZE_CONT      0x20
 589 #define XMTPSIZE_TRIPLE    0x30
 590 #define XMTPSIZE_REDUNDANT 0x60
 591 #define XMTPSIZE_INF       0
 592
 593 #define XMTCONTEN          0x04
 594 #define XMTPFRM            0x02   /* Transmit at the next frame boundary */
 595 #define XMTPIMM            0x01   /* Transmit immediately */
 596
 597         __le16 _r_a;
 598         u8     prim[4];           /* K, D0, D1, D2 */
 599         u8     _r_b[50];
 600         __le16 conn_handle;
 601         u8     _r_c[56];
 602 } __attribute__ ((packed));
 603
 604 /* This describes both SSP Target Get Data and SSP Target Get Data And
 605  * Send Good Response SCBs.  Used when the sequencer is operating in
 606  * target mode...
 607  */
 608 struct ssp_targ_get_data {
 609         u8     proto_conn_rate;
 610         __le32 total_xfer_len;
 611         struct ssp_frame_hdr ssp_frame;
 612         struct xfer_rdy_iu  xfer_rdy;
 613         u8     lun[LUN_SIZE];
 614         __le64 _r_a;
 615         __le16 sister_scb;
 616         __le16 conn_handle;
 617         u8     data_dir;          /* 01b */
 618         u8     _r_b;
 619         u8     retry_count;
 620         u8     _r_c[5];
 621         struct sg_el sg_element[3];
 622 } __attribute__ ((packed));
 623
 624 /* ---------- The actual SCB struct ---------- */
 625
 626 struct scb {
 627         struct scb_header header;
 628         union {
 629                 struct initiate_ssp_task ssp_task;
 630                 struct initiate_ata_task ata_task;
 631                 struct initiate_smp_task smp_task;
 632                 struct control_phy       control_phy;
 633                 struct control_ata_dev   control_ata_dev;
 634                 struct empty_scb         escb;
 635                 struct initiate_link_adm link_adm;
 636                 struct copy_memory       cp_mem;
 637                 struct abort_task        abort_task;
 638                 struct clear_nexus       clear_nexus;
 639                 struct initiate_ssp_tmf  ssp_tmf;
 640         };
 641 } __attribute__ ((packed));
 642
 643 /* ---------- Done List ---------- */
 644 /* The done list entry opcode field is defined below.
 645  * The mnemonic encoding and meaning is as follows:
 646  * TC - Task Complete, status was received and acknowledged
 647  * TF - Task Failed, indicates an error prior to receiving acknowledgment
 648  *   for the command:
 649  *   - no conn,
 650  *   - NACK or R_ERR received in response to this command,
 651  *   - credit blocked or not available, or in the case of SMP request,
 652  *   - no SMP response was received.
 653  *   In these four cases it is known that the target didn't receive the
 654  *   command.
 655  * TI - Task Interrupted, error after the command was acknowledged.  It is
 656  *   known that the command was received by the target.
 657  * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
 658  *   (R_ERR) was received due to loss of signal, broken connection, loss of
 659  *   dword sync or other reason.  The application client should send the
 660  *   appropriate task query.
 661  * TA - Task Aborted, see TF.
 662  * _RESP - The completion includes an empty buffer containing status.
 663  * TO - Timeout.
 664  */
 665 #define TC_NO_ERROR             0x00
 666 #define TC_UNDERRUN             0x01
 667 #define TC_OVERRUN              0x02
 668 #define TF_OPEN_TO              0x03
 669 #define TF_OPEN_REJECT          0x04
 670 #define TI_BREAK                0x05
 671 #define TI_PROTO_ERR            0x06
 672 #define TC_SSP_RESP             0x07
 673 #define TI_PHY_DOWN             0x08
 674 #define TF_PHY_DOWN             0x09
 675 #define TC_LINK_ADM_RESP        0x0a
 676 #define TC_CSMI                 0x0b
 677 #define TC_ATA_RESP             0x0c
 678 #define TU_PHY_DOWN             0x0d
 679 #define TU_BREAK                0x0e
 680 #define TI_SATA_TO              0x0f
 681 #define TI_NAK                  0x10
 682 #define TC_CONTROL_PHY          0x11
 683 #define TF_BREAK                0x12
 684 #define TC_RESUME               0x13
 685 #define TI_ACK_NAK_TO           0x14
 686 #define TF_SMPRSP_TO            0x15
 687 #define TF_SMP_XMIT_RCV_ERR     0x16
 688 #define TC_PARTIAL_SG_LIST      0x17
 689 #define TU_ACK_NAK_TO           0x18
 690 #define TU_SATA_TO              0x19
 691 #define TF_NAK_RECV             0x1a
 692 #define TA_I_T_NEXUS_LOSS       0x1b
 693 #define TC_ATA_R_ERR_RECV       0x1c
 694 #define TF_TMF_NO_CTX           0x1d
 695 #define TA_ON_REQ               0x1e
 696 #define TF_TMF_NO_TAG           0x1f
 697 #define TF_TMF_TAG_FREE         0x20
 698 #define TF_TMF_TASK_DONE        0x21
 699 #define TF_TMF_NO_CONN_HANDLE   0x22
 700 #define TC_TASK_CLEARED         0x23
 701 #define TI_SYNCS_RECV           0x24
 702 #define TU_SYNCS_RECV           0x25
 703 #define TF_IRTT_TO              0x26
 704 #define TF_NO_SMP_CONN          0x27
 705 #define TF_IU_SHORT             0x28
 706 #define TF_DATA_OFFS_ERR        0x29
 707 #define TF_INV_CONN_HANDLE      0x2a
 708 #define TF_REQUESTED_N_PENDING  0x2b
 709
 710 /* 0xc1 - 0xc7: empty buffer received,
 711    0xd1 - 0xd7: establish nexus empty buffer received
 712 */
 713 /* This is the ESCB mask */
 714 #define ESCB_RECVD              0xC0
 715
 716
 717 /* This struct done_list_struct defines the done list entry.
 718  * All fields are LE.
 719  */
 720 struct done_list_struct {
 721         __le16 index;             /* aka transaction context */
 722         u8     opcode;
 723         u8     status_block[4];
 724         u8     toggle;            /* bit 0 */
 725 #define DL_TOGGLE_MASK     0x01
 726 } __attribute__ ((packed));
 727
 728 /* ---------- PHYS ---------- */
 729
 730 struct asd_phy {
 731         struct asd_sas_phy        sas_phy;
 732         struct asd_phy_desc   *phy_desc; /* hw profile */
 733
 734         struct sas_identify_frame *identify_frame;
 735         struct asd_dma_tok  *id_frm_tok;
 736
 737         u8         frame_rcvd[ASD_EDB_SIZE];
 738 };
 739
 740
 741 #define ASD_SCB_SIZE sizeof(struct scb)
 742 #define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
 743
 744 /* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
 745  * Default: 0x10 (it's a mask)
 746  */
 747 #define ASD_NOTIFY_ENABLE_SPINUP  0x10
 748
 749 /* If enabled, set this to the interval between transmission
 750  * of NOTIFY (ENABLE SPINUP). In units of 200 us.
 751  */
 752 #define ASD_NOTIFY_TIMEOUT        2500
 753
 754 /* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
 755  * If 0, transmit immediately. In milliseconds.
 756  */
 757 #define ASD_NOTIFY_DOWN_COUNT     0
 758
 759 /* Device present timer timeout constant, 10 ms. */
 760 #define ASD_DEV_PRESENT_TIMEOUT   0x2710
 761
 762 #define ASD_SATA_INTERLOCK_TIMEOUT 0
 763
 764 /* How long to wait before shutting down an STP connection, unless
 765  * an STP target sent frame(s). 50 usec.
 766  * IGNORED by the sequencer (i.e. value 0 always).
 767  */
 768 #define ASD_STP_SHUTDOWN_TIMEOUT  0x0
 769
 770 /* ATA soft reset timer timeout. 5 usec. */
 771 #define ASD_SRST_ASSERT_TIMEOUT   0x05
 772
 773 /* 31 sec */
 774 #define ASD_RCV_FIS_TIMEOUT       0x01D905C0
 775
 776 #define ASD_ONE_MILLISEC_TIMEOUT  0x03e8
 777
 778 /* COMINIT timer */
 779 #define ASD_TEN_MILLISEC_TIMEOUT  0x2710
 780 #define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
 781
 782 /* 1 sec */
 783 #define ASD_SMP_RCV_TIMEOUT       0x000F4240
 784
 785 #endif