ide-pci-generic: kill the unused ifdef/endif/MODULE code
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / net / mac8390.c
blob9e700749bb319fdd65856dcba91b8413ceb76fb3
1 /* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike)
2 Ethernet cards on Linux */
3 /* Based on the former daynaport.c driver, by Alan Cox. Some code
4 taken from or inspired by skeleton.c by Donald Becker, acenic.c by
5 Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker.
7 This software may be used and distributed according to the terms of
8 the GNU Public License, incorporated herein by reference. */
10 /* 2000-02-28: support added for Dayna and Kinetics cards by
11 A.G.deWijn@phys.uu.nl */
12 /* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */
13 /* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */
14 /* 2001-05-15: support for Cabletron ported from old daynaport driver
15 * and fixed access to Sonic Sys card which masquerades as a Farallon
16 * by rayk@knightsmanor.org */
17 /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */
18 /* 2003-12-26: Make sure Asante cards always work. */
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/types.h>
23 #include <linux/fcntl.h>
24 #include <linux/interrupt.h>
25 #include <linux/ptrace.h>
26 #include <linux/ioport.h>
27 #include <linux/nubus.h>
28 #include <linux/in.h>
29 #include <linux/slab.h>
30 #include <linux/string.h>
31 #include <linux/errno.h>
32 #include <linux/init.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/skbuff.h>
36 #include <linux/bitops.h>
38 #include <asm/system.h>
39 #include <asm/io.h>
40 #include <asm/dma.h>
41 #include <asm/hwtest.h>
42 #include <asm/macints.h>
44 static char version[] =
45 "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
47 #define EI_SHIFT(x) (ei_local->reg_offset[x])
48 #define ei_inb(port) in_8(port)
49 #define ei_outb(val,port) out_8(port,val)
50 #define ei_inb_p(port) in_8(port)
51 #define ei_outb_p(val,port) out_8(port,val)
53 #include "lib8390.c"
55 #define WD_START_PG 0x00 /* First page of TX buffer */
56 #define CABLETRON_RX_START_PG 0x00 /* First page of RX buffer */
57 #define CABLETRON_RX_STOP_PG 0x30 /* Last page +1 of RX ring */
58 #define CABLETRON_TX_START_PG CABLETRON_RX_STOP_PG /* First page of TX buffer */
60 /* Unfortunately it seems we have to hardcode these for the moment */
61 /* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */
63 #define DAYNA_8390_BASE 0x80000
64 #define DAYNA_8390_MEM 0x00000
66 #define CABLETRON_8390_BASE 0x90000
67 #define CABLETRON_8390_MEM 0x00000
69 #define INTERLAN_8390_BASE 0xE0000
70 #define INTERLAN_8390_MEM 0xD0000
72 enum mac8390_type {
73 MAC8390_NONE = -1,
74 MAC8390_APPLE,
75 MAC8390_ASANTE,
76 MAC8390_FARALLON,
77 MAC8390_CABLETRON,
78 MAC8390_DAYNA,
79 MAC8390_INTERLAN,
80 MAC8390_KINETICS,
83 static const char * cardname[] = {
84 "apple",
85 "asante",
86 "farallon",
87 "cabletron",
88 "dayna",
89 "interlan",
90 "kinetics",
93 static int word16[] = {
94 1, /* apple */
95 1, /* asante */
96 1, /* farallon */
97 1, /* cabletron */
98 0, /* dayna */
99 1, /* interlan */
100 0, /* kinetics */
103 /* on which cards do we use NuBus resources? */
104 static int useresources[] = {
105 1, /* apple */
106 1, /* asante */
107 1, /* farallon */
108 0, /* cabletron */
109 0, /* dayna */
110 0, /* interlan */
111 0, /* kinetics */
114 enum mac8390_access {
115 ACCESS_UNKNOWN = 0,
116 ACCESS_32,
117 ACCESS_16,
120 extern enum mac8390_type mac8390_ident(struct nubus_dev * dev);
121 extern int mac8390_memsize(unsigned long membase);
122 extern int mac8390_memtest(struct net_device * dev);
123 static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
124 enum mac8390_type type);
126 static int mac8390_open(struct net_device * dev);
127 static int mac8390_close(struct net_device * dev);
128 static void mac8390_no_reset(struct net_device *dev);
129 static void interlan_reset(struct net_device *dev);
131 /* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/
132 static void sane_get_8390_hdr(struct net_device *dev,
133 struct e8390_pkt_hdr *hdr, int ring_page);
134 static void sane_block_input(struct net_device * dev, int count,
135 struct sk_buff * skb, int ring_offset);
136 static void sane_block_output(struct net_device * dev, int count,
137 const unsigned char * buf, const int start_page);
139 /* dayna_memcpy to and from card */
140 static void dayna_memcpy_fromcard(struct net_device *dev, void *to,
141 int from, int count);
142 static void dayna_memcpy_tocard(struct net_device *dev, int to,
143 const void *from, int count);
145 /* Dayna - Dayna/Kinetics use this */
146 static void dayna_get_8390_hdr(struct net_device *dev,
147 struct e8390_pkt_hdr *hdr, int ring_page);
148 static void dayna_block_input(struct net_device *dev, int count,
149 struct sk_buff *skb, int ring_offset);
150 static void dayna_block_output(struct net_device *dev, int count,
151 const unsigned char *buf, int start_page);
153 #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
154 #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
156 /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
157 static void slow_sane_get_8390_hdr(struct net_device *dev,
158 struct e8390_pkt_hdr *hdr, int ring_page);
159 static void slow_sane_block_input(struct net_device *dev, int count,
160 struct sk_buff *skb, int ring_offset);
161 static void slow_sane_block_output(struct net_device *dev, int count,
162 const unsigned char *buf, int start_page);
163 static void word_memcpy_tocard(void *tp, const void *fp, int count);
164 static void word_memcpy_fromcard(void *tp, const void *fp, int count);
166 enum mac8390_type __init mac8390_ident(struct nubus_dev * dev)
168 switch (dev->dr_sw) {
169 case NUBUS_DRSW_3COM:
170 switch (dev->dr_hw) {
171 case NUBUS_DRHW_APPLE_SONIC_NB:
172 case NUBUS_DRHW_APPLE_SONIC_LC:
173 case NUBUS_DRHW_SONNET:
174 return MAC8390_NONE;
175 break;
176 default:
177 return MAC8390_APPLE;
178 break;
180 break;
182 case NUBUS_DRSW_APPLE:
183 switch (dev->dr_hw) {
184 case NUBUS_DRHW_ASANTE_LC:
185 return MAC8390_NONE;
186 break;
187 case NUBUS_DRHW_CABLETRON:
188 return MAC8390_CABLETRON;
189 break;
190 default:
191 return MAC8390_APPLE;
192 break;
194 break;
196 case NUBUS_DRSW_ASANTE:
197 return MAC8390_ASANTE;
198 break;
200 case NUBUS_DRSW_TECHWORKS:
201 case NUBUS_DRSW_DAYNA2:
202 case NUBUS_DRSW_DAYNA_LC:
203 if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
204 return MAC8390_CABLETRON;
205 else
206 return MAC8390_APPLE;
207 break;
209 case NUBUS_DRSW_FARALLON:
210 return MAC8390_FARALLON;
211 break;
213 case NUBUS_DRSW_KINETICS:
214 switch (dev->dr_hw) {
215 case NUBUS_DRHW_INTERLAN:
216 return MAC8390_INTERLAN;
217 break;
218 default:
219 return MAC8390_KINETICS;
220 break;
222 break;
224 case NUBUS_DRSW_DAYNA:
225 // These correspond to Dayna Sonic cards
226 // which use the macsonic driver
227 if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
228 dev->dr_hw == NUBUS_DRHW_INTERLAN )
229 return MAC8390_NONE;
230 else
231 return MAC8390_DAYNA;
232 break;
234 return MAC8390_NONE;
237 enum mac8390_access __init mac8390_testio(volatile unsigned long membase)
239 unsigned long outdata = 0xA5A0B5B0;
240 unsigned long indata = 0x00000000;
241 /* Try writing 32 bits */
242 memcpy((char *)membase, (char *)&outdata, 4);
243 /* Now compare them */
244 if (memcmp((char *)&outdata, (char *)membase, 4) == 0)
245 return ACCESS_32;
246 /* Write 16 bit output */
247 word_memcpy_tocard((char *)membase, (char *)&outdata, 4);
248 /* Now read it back */
249 word_memcpy_fromcard((char *)&indata, (char *)membase, 4);
250 if (outdata == indata)
251 return ACCESS_16;
252 return ACCESS_UNKNOWN;
255 int __init mac8390_memsize(unsigned long membase)
257 unsigned long flags;
258 int i, j;
260 local_irq_save(flags);
261 /* Check up to 32K in 4K increments */
262 for (i = 0; i < 8; i++) {
263 volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000));
265 /* Unwriteable - we have a fully decoded card and the
266 RAM end located */
267 if (hwreg_present(m) == 0)
268 break;
270 /* write a distinctive byte */
271 *m = 0xA5A0 | i;
272 /* check that we read back what we wrote */
273 if (*m != (0xA5A0 | i))
274 break;
276 /* check for partial decode and wrap */
277 for (j = 0; j < i; j++) {
278 volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000));
279 if (*p != (0xA5A0 | j))
280 break;
283 local_irq_restore(flags);
284 /* in any case, we stopped once we tried one block too many,
285 or once we reached 32K */
286 return i * 0x1000;
289 struct net_device * __init mac8390_probe(int unit)
291 struct net_device *dev;
292 volatile unsigned short *i;
293 int version_disp = 0;
294 struct nubus_dev * ndev = NULL;
295 int err = -ENODEV;
297 struct nubus_dir dir;
298 struct nubus_dirent ent;
299 int offset;
300 static unsigned int slots;
302 enum mac8390_type cardtype;
304 /* probably should check for Nubus instead */
306 if (!MACH_IS_MAC)
307 return ERR_PTR(-ENODEV);
309 dev = ____alloc_ei_netdev(0);
310 if (!dev)
311 return ERR_PTR(-ENOMEM);
313 if (unit >= 0)
314 sprintf(dev->name, "eth%d", unit);
316 while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) {
317 /* Have we seen it already? */
318 if (slots & (1<<ndev->board->slot))
319 continue;
320 slots |= 1<<ndev->board->slot;
322 if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
323 continue;
325 if (version_disp == 0) {
326 version_disp = 1;
327 printk(version);
330 dev->irq = SLOT2IRQ(ndev->board->slot);
331 /* This is getting to be a habit */
332 dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20);
334 /* Get some Nubus info - we will trust the card's idea
335 of where its memory and registers are. */
337 if (nubus_get_func_dir(ndev, &dir) == -1) {
338 printk(KERN_ERR "%s: Unable to get Nubus functional"
339 " directory for slot %X!\n",
340 dev->name, ndev->board->slot);
341 continue;
344 /* Get the MAC address */
345 if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
346 printk(KERN_INFO "%s: Couldn't get MAC address!\n",
347 dev->name);
348 continue;
349 } else {
350 nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
353 if (useresources[cardtype] == 1) {
354 nubus_rewinddir(&dir);
355 if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
356 printk(KERN_ERR "%s: Memory offset resource"
357 " for slot %X not found!\n",
358 dev->name, ndev->board->slot);
359 continue;
361 nubus_get_rsrc_mem(&offset, &ent, 4);
362 dev->mem_start = dev->base_addr + offset;
363 /* yes, this is how the Apple driver does it */
364 dev->base_addr = dev->mem_start + 0x10000;
365 nubus_rewinddir(&dir);
366 if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
367 printk(KERN_INFO "%s: Memory length resource"
368 " for slot %X not found"
369 ", probing\n",
370 dev->name, ndev->board->slot);
371 offset = mac8390_memsize(dev->mem_start);
372 } else {
373 nubus_get_rsrc_mem(&offset, &ent, 4);
375 dev->mem_end = dev->mem_start + offset;
376 } else {
377 switch (cardtype) {
378 case MAC8390_KINETICS:
379 case MAC8390_DAYNA: /* it's the same */
380 dev->base_addr =
381 (int)(ndev->board->slot_addr +
382 DAYNA_8390_BASE);
383 dev->mem_start =
384 (int)(ndev->board->slot_addr +
385 DAYNA_8390_MEM);
386 dev->mem_end =
387 dev->mem_start +
388 mac8390_memsize(dev->mem_start);
389 break;
390 case MAC8390_INTERLAN:
391 dev->base_addr =
392 (int)(ndev->board->slot_addr +
393 INTERLAN_8390_BASE);
394 dev->mem_start =
395 (int)(ndev->board->slot_addr +
396 INTERLAN_8390_MEM);
397 dev->mem_end =
398 dev->mem_start +
399 mac8390_memsize(dev->mem_start);
400 break;
401 case MAC8390_CABLETRON:
402 dev->base_addr =
403 (int)(ndev->board->slot_addr +
404 CABLETRON_8390_BASE);
405 dev->mem_start =
406 (int)(ndev->board->slot_addr +
407 CABLETRON_8390_MEM);
408 /* The base address is unreadable if 0x00
409 * has been written to the command register
410 * Reset the chip by writing E8390_NODMA +
411 * E8390_PAGE0 + E8390_STOP just to be
412 * sure
414 i = (void *)dev->base_addr;
415 *i = 0x21;
416 dev->mem_end =
417 dev->mem_start +
418 mac8390_memsize(dev->mem_start);
419 break;
421 default:
422 printk(KERN_ERR "Card type %s is"
423 " unsupported, sorry\n",
424 ndev->board->name);
425 continue;
429 /* Do the nasty 8390 stuff */
430 if (!mac8390_initdev(dev, ndev, cardtype))
431 break;
434 if (!ndev)
435 goto out;
436 err = register_netdev(dev);
437 if (err)
438 goto out;
439 return dev;
441 out:
442 free_netdev(dev);
443 return ERR_PTR(err);
446 #ifdef MODULE
447 MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others");
448 MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver");
449 MODULE_LICENSE("GPL");
451 /* overkill, of course */
452 static struct net_device *dev_mac8390[15];
453 int init_module(void)
455 int i;
456 for (i = 0; i < 15; i++) {
457 struct net_device *dev = mac8390_probe(-1);
458 if (IS_ERR(dev))
459 break;
460 dev_mac890[i] = dev;
462 if (!i) {
463 printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n");
464 return -ENODEV;
466 return 0;
469 void cleanup_module(void)
471 int i;
472 for (i = 0; i < 15; i++) {
473 struct net_device *dev = dev_mac890[i];
474 if (dev) {
475 unregister_netdev(dev);
476 free_netdev(dev);
481 #endif /* MODULE */
483 static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
484 enum mac8390_type type)
486 static u32 fwrd4_offsets[16]={
487 0, 4, 8, 12,
488 16, 20, 24, 28,
489 32, 36, 40, 44,
490 48, 52, 56, 60
492 static u32 back4_offsets[16]={
493 60, 56, 52, 48,
494 44, 40, 36, 32,
495 28, 24, 20, 16,
496 12, 8, 4, 0
498 static u32 fwrd2_offsets[16]={
499 0, 2, 4, 6,
500 8, 10, 12, 14,
501 16, 18, 20, 22,
502 24, 26, 28, 30
505 int access_bitmode = 0;
507 /* Now fill in our stuff */
508 dev->open = &mac8390_open;
509 dev->stop = &mac8390_close;
510 #ifdef CONFIG_NET_POLL_CONTROLLER
511 dev->poll_controller = __ei_poll;
512 #endif
514 /* GAR, ei_status is actually a macro even though it looks global */
515 ei_status.name = cardname[type];
516 ei_status.word16 = word16[type];
518 /* Cabletron's TX/RX buffers are backwards */
519 if (type == MAC8390_CABLETRON) {
520 ei_status.tx_start_page = CABLETRON_TX_START_PG;
521 ei_status.rx_start_page = CABLETRON_RX_START_PG;
522 ei_status.stop_page = CABLETRON_RX_STOP_PG;
523 ei_status.rmem_start = dev->mem_start;
524 ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
525 } else {
526 ei_status.tx_start_page = WD_START_PG;
527 ei_status.rx_start_page = WD_START_PG + TX_PAGES;
528 ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
529 ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
530 ei_status.rmem_end = dev->mem_end;
533 /* Fill in model-specific information and functions */
534 switch(type) {
535 case MAC8390_FARALLON:
536 case MAC8390_APPLE:
537 switch(mac8390_testio(dev->mem_start)) {
538 case ACCESS_UNKNOWN:
539 printk("Don't know how to access card memory!\n");
540 return -ENODEV;
541 break;
543 case ACCESS_16:
544 /* 16 bit card, register map is reversed */
545 ei_status.reset_8390 = &mac8390_no_reset;
546 ei_status.block_input = &slow_sane_block_input;
547 ei_status.block_output = &slow_sane_block_output;
548 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
549 ei_status.reg_offset = back4_offsets;
550 break;
552 case ACCESS_32:
553 /* 32 bit card, register map is reversed */
554 ei_status.reset_8390 = &mac8390_no_reset;
555 ei_status.block_input = &sane_block_input;
556 ei_status.block_output = &sane_block_output;
557 ei_status.get_8390_hdr = &sane_get_8390_hdr;
558 ei_status.reg_offset = back4_offsets;
559 access_bitmode = 1;
560 break;
562 break;
564 case MAC8390_ASANTE:
565 /* Some Asante cards pass the 32 bit test
566 * but overwrite system memory when run at 32 bit.
567 * so we run them all at 16 bit.
569 ei_status.reset_8390 = &mac8390_no_reset;
570 ei_status.block_input = &slow_sane_block_input;
571 ei_status.block_output = &slow_sane_block_output;
572 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
573 ei_status.reg_offset = back4_offsets;
574 break;
576 case MAC8390_CABLETRON:
577 /* 16 bit card, register map is short forward */
578 ei_status.reset_8390 = &mac8390_no_reset;
579 ei_status.block_input = &slow_sane_block_input;
580 ei_status.block_output = &slow_sane_block_output;
581 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
582 ei_status.reg_offset = fwrd2_offsets;
583 break;
585 case MAC8390_DAYNA:
586 case MAC8390_KINETICS:
587 /* 16 bit memory, register map is forward */
588 /* dayna and similar */
589 ei_status.reset_8390 = &mac8390_no_reset;
590 ei_status.block_input = &dayna_block_input;
591 ei_status.block_output = &dayna_block_output;
592 ei_status.get_8390_hdr = &dayna_get_8390_hdr;
593 ei_status.reg_offset = fwrd4_offsets;
594 break;
596 case MAC8390_INTERLAN:
597 /* 16 bit memory, register map is forward */
598 ei_status.reset_8390 = &interlan_reset;
599 ei_status.block_input = &slow_sane_block_input;
600 ei_status.block_output = &slow_sane_block_output;
601 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
602 ei_status.reg_offset = fwrd4_offsets;
603 break;
605 default:
606 printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name);
607 return -ENODEV;
610 __NS8390_init(dev, 0);
612 /* Good, done, now spit out some messages */
613 printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
614 dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
615 printk(KERN_INFO "MAC ");
617 int i;
618 for (i = 0; i < 6; i++) {
619 printk("%2.2x", dev->dev_addr[i]);
620 if (i < 5)
621 printk(":");
624 printk(" IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
625 dev->irq, (int)((dev->mem_end - dev->mem_start)/0x1000) * 4,
626 dev->mem_start, access_bitmode?32:16);
627 return 0;
630 static int mac8390_open(struct net_device *dev)
632 __ei_open(dev);
633 if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) {
634 printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
635 return -EAGAIN;
637 return 0;
640 static int mac8390_close(struct net_device *dev)
642 free_irq(dev->irq, dev);
643 __ei_close(dev);
644 return 0;
647 static void mac8390_no_reset(struct net_device *dev)
649 ei_status.txing = 0;
650 if (ei_debug > 1)
651 printk("reset not supported\n");
652 return;
655 static void interlan_reset(struct net_device *dev)
657 unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
658 if (ei_debug > 1)
659 printk("Need to reset the NS8390 t=%lu...", jiffies);
660 ei_status.txing = 0;
661 target[0xC0000] = 0;
662 if (ei_debug > 1)
663 printk("reset complete\n");
664 return;
667 /* dayna_memcpy_fromio/dayna_memcpy_toio */
668 /* directly from daynaport.c by Alan Cox */
669 static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count)
671 volatile unsigned char *ptr;
672 unsigned char *target=to;
673 from<<=1; /* word, skip overhead */
674 ptr=(unsigned char *)(dev->mem_start+from);
675 /* Leading byte? */
676 if (from&2) {
677 *target++ = ptr[-1];
678 ptr += 2;
679 count--;
681 while(count>=2)
683 *(unsigned short *)target = *(unsigned short volatile *)ptr;
684 ptr += 4; /* skip cruft */
685 target += 2;
686 count-=2;
688 /* Trailing byte? */
689 if(count)
690 *target = *ptr;
693 static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count)
695 volatile unsigned short *ptr;
696 const unsigned char *src=from;
697 to<<=1; /* word, skip overhead */
698 ptr=(unsigned short *)(dev->mem_start+to);
699 /* Leading byte? */
700 if (to&2) { /* avoid a byte write (stomps on other data) */
701 ptr[-1] = (ptr[-1]&0xFF00)|*src++;
702 ptr++;
703 count--;
705 while(count>=2)
707 *ptr++=*(unsigned short *)src; /* Copy and */
708 ptr++; /* skip cruft */
709 src += 2;
710 count-=2;
712 /* Trailing byte? */
713 if(count)
715 /* card doesn't like byte writes */
716 *ptr=(*ptr&0x00FF)|(*src << 8);
720 /* sane block input/output */
721 static void sane_get_8390_hdr(struct net_device *dev,
722 struct e8390_pkt_hdr *hdr, int ring_page)
724 unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
725 memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4);
726 /* Fix endianness */
727 hdr->count = swab16(hdr->count);
730 static void sane_block_input(struct net_device *dev, int count,
731 struct sk_buff *skb, int ring_offset)
733 unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
734 unsigned long xfer_start = xfer_base + dev->mem_start;
736 if (xfer_start + count > ei_status.rmem_end) {
737 /* We must wrap the input move. */
738 int semi_count = ei_status.rmem_end - xfer_start;
739 memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count);
740 count -= semi_count;
741 memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count);
742 } else {
743 memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count);
747 static void sane_block_output(struct net_device *dev, int count,
748 const unsigned char *buf, int start_page)
750 long shmem = (start_page - WD_START_PG)<<8;
752 memcpy_toio((char *)dev->mem_start + shmem, buf, count);
755 /* dayna block input/output */
756 static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
758 unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
760 dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4);
761 /* Fix endianness */
762 hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
765 static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
767 unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
768 unsigned long xfer_start = xfer_base+dev->mem_start;
770 /* Note the offset math is done in card memory space which is word
771 per long onto our space. */
773 if (xfer_start + count > ei_status.rmem_end)
775 /* We must wrap the input move. */
776 int semi_count = ei_status.rmem_end - xfer_start;
777 dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count);
778 count -= semi_count;
779 dayna_memcpy_fromcard(dev, skb->data + semi_count,
780 ei_status.rmem_start - dev->mem_start,
781 count);
783 else
785 dayna_memcpy_fromcard(dev, skb->data, xfer_base, count);
789 static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf,
790 int start_page)
792 long shmem = (start_page - WD_START_PG)<<8;
794 dayna_memcpy_tocard(dev, shmem, buf, count);
797 /* Cabletron block I/O */
798 static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
799 int ring_page)
801 unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
802 word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4);
803 /* Register endianism - fix here rather than 8390.c */
804 hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
807 static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb,
808 int ring_offset)
810 unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
811 unsigned long xfer_start = xfer_base+dev->mem_start;
813 if (xfer_start + count > ei_status.rmem_end)
815 /* We must wrap the input move. */
816 int semi_count = ei_status.rmem_end - xfer_start;
817 word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
818 xfer_base, semi_count);
819 count -= semi_count;
820 word_memcpy_fromcard(skb->data + semi_count,
821 (char *)ei_status.rmem_start, count);
823 else
825 word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
826 xfer_base, count);
830 static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf,
831 int start_page)
833 long shmem = (start_page - WD_START_PG)<<8;
835 word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count);
838 static void word_memcpy_tocard(void *tp, const void *fp, int count)
840 volatile unsigned short *to = tp;
841 const unsigned short *from = fp;
843 count++;
844 count/=2;
846 while(count--)
847 *to++=*from++;
850 static void word_memcpy_fromcard(void *tp, const void *fp, int count)
852 unsigned short *to = tp;
853 const volatile unsigned short *from = fp;
855 count++;
856 count/=2;
858 while(count--)
859 *to++=*from++;