[SERIAL] Make uart_line_info() correctly tell MMIO from I/O port
[linux-2.6/openmoko-kernel/knife-kernel.git] / arch / sparc / kernel / ebus.c
blob75ac24d229b1dda145b04ac1f68f317e050e47b3
1 /* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $
2 * ebus.c: PCI to EBus bridge device.
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 * Adopted for sparc by V. Roganov and G. Raiko.
7 * Fixes for different platforms by Pete Zaitcev.
8 */
10 #include <linux/kernel.h>
11 #include <linux/types.h>
12 #include <linux/init.h>
13 #include <linux/slab.h>
14 #include <linux/string.h>
16 #include <asm/system.h>
17 #include <asm/page.h>
18 #include <asm/pbm.h>
19 #include <asm/ebus.h>
20 #include <asm/io.h>
21 #include <asm/oplib.h>
22 #include <asm/prom.h>
23 #include <asm/bpp.h>
25 struct linux_ebus *ebus_chain = NULL;
27 /* We are together with pcic.c under CONFIG_PCI. */
28 extern unsigned int pcic_pin_to_irq(unsigned int, char *name);
31 * IRQ Blacklist
32 * Here we list PROMs and systems that are known to supply crap as IRQ numbers.
34 struct ebus_device_irq {
35 char *name;
36 unsigned int pin;
39 struct ebus_system_entry {
40 char *esname;
41 struct ebus_device_irq *ipt;
44 static struct ebus_device_irq je1_1[] = {
45 { "8042", 3 },
46 { "SUNW,CS4231", 0 },
47 { "parallel", 0 },
48 { "se", 2 },
49 { NULL, 0 }
53 * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32).
54 * Blacklist the sucker... Note that Gleb's system will work.
56 static struct ebus_system_entry ebus_blacklist[] = {
57 { "SUNW,JavaEngine1", je1_1 },
58 { NULL, NULL }
61 static struct ebus_device_irq *ebus_blackp = NULL;
65 static inline unsigned long ebus_alloc(size_t size)
67 return (unsigned long)kmalloc(size, GFP_ATOMIC);
72 int __init ebus_blacklist_irq(char *name)
74 struct ebus_device_irq *dp;
76 if ((dp = ebus_blackp) != NULL) {
77 for (; dp->name != NULL; dp++) {
78 if (strcmp(name, dp->name) == 0) {
79 return pcic_pin_to_irq(dp->pin, name);
83 return 0;
86 void __init fill_ebus_child(struct device_node *dp,
87 struct linux_ebus_child *dev)
89 int *regs;
90 int *irqs;
91 int i, len;
93 dev->prom_node = dp;
94 regs = of_get_property(dp, "reg", &len);
95 if (!regs)
96 len = 0;
97 dev->num_addrs = len / sizeof(regs[0]);
99 for (i = 0; i < dev->num_addrs; i++) {
100 if (regs[i] >= dev->parent->num_addrs) {
101 prom_printf("UGH: property for %s was %d, need < %d\n",
102 dev->prom_node->name, len,
103 dev->parent->num_addrs);
104 panic(__FUNCTION__);
107 /* XXX resource */
108 dev->resource[i].start =
109 dev->parent->resource[regs[i]].start;
112 for (i = 0; i < PROMINTR_MAX; i++)
113 dev->irqs[i] = PCI_IRQ_NONE;
115 if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
116 dev->num_irqs = 1;
117 } else {
118 irqs = of_get_property(dp, "interrupts", &len);
119 if (!irqs) {
120 dev->num_irqs = 0;
121 dev->irqs[0] = 0;
122 if (dev->parent->num_irqs != 0) {
123 dev->num_irqs = 1;
124 dev->irqs[0] = dev->parent->irqs[0];
126 } else {
127 dev->num_irqs = len / sizeof(irqs[0]);
128 if (irqs[0] == 0 || irqs[0] >= 8) {
130 * XXX Zero is a valid pin number...
131 * This works as long as Ebus is not wired
132 * to INTA#.
134 printk("EBUS: %s got bad irq %d from PROM\n",
135 dev->prom_node->name, irqs[0]);
136 dev->num_irqs = 0;
137 dev->irqs[0] = 0;
138 } else {
139 dev->irqs[0] =
140 pcic_pin_to_irq(irqs[0],
141 dev->prom_node->name);
147 void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
149 struct linux_prom_registers *regs;
150 struct linux_ebus_child *child;
151 int *irqs;
152 int i, n, len;
153 unsigned long baseaddr;
155 dev->prom_node = dp;
157 regs = of_get_property(dp, "reg", &len);
158 if (len % sizeof(struct linux_prom_registers)) {
159 prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
160 dev->prom_node->name, len,
161 (int)sizeof(struct linux_prom_registers));
162 panic(__FUNCTION__);
164 dev->num_addrs = len / sizeof(struct linux_prom_registers);
166 for (i = 0; i < dev->num_addrs; i++) {
168 * XXX Collect JE-1 PROM
170 * Example - JS-E with 3.11:
171 * /ebus
172 * regs
173 * 0x00000000, 0x0, 0x00000000, 0x0, 0x00000000,
174 * 0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000,
175 * 0x82000014, 0x0, 0x38800000, 0x0, 0x00800000,
176 * ranges
177 * 0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000,
178 * 0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000,
179 * /ebus/8042
180 * regs
181 * 0x00000001, 0x00300060, 0x00000008,
182 * 0x00000001, 0x00300060, 0x00000008,
184 n = regs[i].which_io;
185 if (n >= 4) {
186 /* XXX This is copied from old JE-1 by Gleb. */
187 n = (regs[i].which_io - 0x10) >> 2;
188 } else {
193 * XXX Now as we have regions, why don't we make an on-demand allocation...
195 dev->resource[i].start = 0;
196 if ((baseaddr = dev->bus->self->resource[n].start +
197 regs[i].phys_addr) != 0) {
198 /* dev->resource[i].name = dev->prom_name; */
199 if ((baseaddr = (unsigned long) ioremap(baseaddr,
200 regs[i].reg_size)) == 0) {
201 panic("ebus: unable to remap dev %s",
202 dev->prom_node->name);
205 dev->resource[i].start = baseaddr; /* XXX Unaligned */
208 for (i = 0; i < PROMINTR_MAX; i++)
209 dev->irqs[i] = PCI_IRQ_NONE;
211 if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) {
212 dev->num_irqs = 1;
213 } else {
214 irqs = of_get_property(dp, "interrupts", &len);
215 if (!irqs) {
216 dev->num_irqs = 0;
217 if ((dev->irqs[0] = dev->bus->self->irq) != 0) {
218 dev->num_irqs = 1;
219 /* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */
221 } else {
222 dev->num_irqs = 1; /* dev->num_irqs = len / sizeof(irqs[0]); */
223 if (irqs[0] == 0 || irqs[0] >= 8) {
224 /* See above for the parent. XXX */
225 printk("EBUS: %s got bad irq %d from PROM\n",
226 dev->prom_node->name, irqs[0]);
227 dev->num_irqs = 0;
228 dev->irqs[0] = 0;
229 } else {
230 dev->irqs[0] =
231 pcic_pin_to_irq(irqs[0],
232 dev->prom_node->name);
237 dev->ofdev.node = dp;
238 dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
239 dev->ofdev.dev.bus = &ebus_bus_type;
240 strcpy(dev->ofdev.dev.bus_id, dp->path_component_name);
242 /* Register with core */
243 if (of_device_register(&dev->ofdev) != 0)
244 printk(KERN_DEBUG "ebus: device registration error for %s!\n",
245 dev->ofdev.dev.bus_id);
247 if ((dp = dp->child) != NULL) {
248 dev->children = (struct linux_ebus_child *)
249 ebus_alloc(sizeof(struct linux_ebus_child));
251 child = dev->children;
252 child->next = NULL;
253 child->parent = dev;
254 child->bus = dev->bus;
255 fill_ebus_child(dp, child);
257 while ((dp = dp->sibling) != NULL) {
258 child->next = (struct linux_ebus_child *)
259 ebus_alloc(sizeof(struct linux_ebus_child));
261 child = child->next;
262 child->next = NULL;
263 child->parent = dev;
264 child->bus = dev->bus;
265 fill_ebus_child(dp, child);
270 void __init ebus_init(void)
272 struct linux_prom_pci_registers *regs;
273 struct linux_pbm_info *pbm;
274 struct linux_ebus_device *dev;
275 struct linux_ebus *ebus;
276 struct ebus_system_entry *sp;
277 struct pci_dev *pdev;
278 struct pcidev_cookie *cookie;
279 struct device_node *dp;
280 struct resource *p;
281 unsigned short pci_command;
282 int len, reg, nreg;
283 int num_ebus = 0;
285 dp = of_find_node_by_path("/");
286 for (sp = ebus_blacklist; sp->esname != NULL; sp++) {
287 if (strcmp(dp->name, sp->esname) == 0) {
288 ebus_blackp = sp->ipt;
289 break;
293 pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL);
294 if (!pdev)
295 return;
297 cookie = pdev->sysdata;
298 dp = cookie->prom_node;
300 ebus_chain = ebus = (struct linux_ebus *)
301 ebus_alloc(sizeof(struct linux_ebus));
302 ebus->next = NULL;
304 while (dp) {
305 struct device_node *nd;
307 ebus->prom_node = dp;
308 ebus->self = pdev;
309 ebus->parent = pbm = cookie->pbm;
311 /* Enable BUS Master. */
312 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
313 pci_command |= PCI_COMMAND_MASTER;
314 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
316 regs = of_get_property(dp, "reg", &len);
317 if (!regs) {
318 prom_printf("%s: can't find reg property\n",
319 __FUNCTION__);
320 prom_halt();
322 nreg = len / sizeof(struct linux_prom_pci_registers);
324 p = &ebus->self->resource[0];
325 for (reg = 0; reg < nreg; reg++) {
326 if (!(regs[reg].which_io & 0x03000000))
327 continue;
329 (p++)->start = regs[reg].phys_lo;
332 ebus->ofdev.node = dp;
333 ebus->ofdev.dev.parent = &pdev->dev;
334 ebus->ofdev.dev.bus = &ebus_bus_type;
335 strcpy(ebus->ofdev.dev.bus_id, dp->path_component_name);
337 /* Register with core */
338 if (of_device_register(&ebus->ofdev) != 0)
339 printk(KERN_DEBUG "ebus: device registration error for %s!\n",
340 ebus->ofdev.dev.bus_id);
343 nd = dp->child;
344 if (!nd)
345 goto next_ebus;
347 ebus->devices = (struct linux_ebus_device *)
348 ebus_alloc(sizeof(struct linux_ebus_device));
350 dev = ebus->devices;
351 dev->next = NULL;
352 dev->children = NULL;
353 dev->bus = ebus;
354 fill_ebus_device(nd, dev);
356 while ((nd = nd->sibling) != NULL) {
357 dev->next = (struct linux_ebus_device *)
358 ebus_alloc(sizeof(struct linux_ebus_device));
360 dev = dev->next;
361 dev->next = NULL;
362 dev->children = NULL;
363 dev->bus = ebus;
364 fill_ebus_device(nd, dev);
367 next_ebus:
368 pdev = pci_get_device(PCI_VENDOR_ID_SUN,
369 PCI_DEVICE_ID_SUN_EBUS, pdev);
370 if (!pdev)
371 break;
373 cookie = pdev->sysdata;
374 dp = cookie->prom_node;
376 ebus->next = (struct linux_ebus *)
377 ebus_alloc(sizeof(struct linux_ebus));
378 ebus = ebus->next;
379 ebus->next = NULL;
380 ++num_ebus;
382 if (pdev)
383 pci_dev_put(pdev);