Makefile

   1 VERSION = 2
   2 PATCHLEVEL = 6
   3 SUBLEVEL = 25
   4 EXTRAVERSION =
   5 NAME = Funky Weasel is Jiggy wit it
   6
   7 # *DOCUMENTATION*
   8 # To see a list of typical targets execute "make help"
   9 # More info can be located in ./README
  10 # Comments in this file are targeted only to the developer, do not
  11 # expect to learn how to build the kernel reading this file.
  12
  13 # Do not:
  14 # o  use make's built-in rules and variables
  15 #    (this increases performance and avoids hard-to-debug behaviour);
  16 # o  print "Entering directory ...";
  17 MAKEFLAGS += -rR --no-print-directory
  18
  19 # We are using a recursive build, so we need to do a little thinking
  20 # to get the ordering right.
  21 #
  22 # Most importantly: sub-Makefiles should only ever modify files in
  23 # their own directory. If in some directory we have a dependency on
  24 # a file in another dir (which doesn't happen often, but it's often
  25 # unavoidable when linking the built-in.o targets which finally
  26 # turn into vmlinux), we will call a sub make in that other dir, and
  27 # after that we are sure that everything which is in that other dir
  28 # is now up to date.
  29 #
  30 # The only cases where we need to modify files which have global
  31 # effects are thus separated out and done before the recursive
  32 # descending is started. They are now explicitly listed as the
  33 # prepare rule.
  34
  35 # To put more focus on warnings, be less verbose as default
  36 # Use 'make V=1' to see the full commands
  37
  38 ifdef V
  39   ifeq ("$(origin V)", "command line")
  40     KBUILD_VERBOSE = $(V)
  41   endif
  42 endif
  43 ifndef KBUILD_VERBOSE
  44   KBUILD_VERBOSE = 0
  45 endif
  46
  47 # Call a source code checker (by default, "sparse") as part of the
  48 # C compilation.
  49 #
  50 # Use 'make C=1' to enable checking of only re-compiled files.
  51 # Use 'make C=2' to enable checking of *all* source files, regardless
  52 # of whether they are re-compiled or not.
  53 #
  54 # See the file "Documentation/sparse.txt" for more details, including
  55 # where to get the "sparse" utility.
  56
  57 ifdef C
  58   ifeq ("$(origin C)", "command line")
  59     KBUILD_CHECKSRC = $(C)
  60   endif
  61 endif
  62 ifndef KBUILD_CHECKSRC
  63   KBUILD_CHECKSRC = 0
  64 endif
  65
  66 # Use make M=dir to specify directory of external module to build
  67 # Old syntax make ... SUBDIRS=$PWD is still supported
  68 # Setting the environment variable KBUILD_EXTMOD take precedence
  69 ifdef SUBDIRS
  70   KBUILD_EXTMOD ?= $(SUBDIRS)
  71 endif
  72 ifdef M
  73   ifeq ("$(origin M)", "command line")
  74     KBUILD_EXTMOD := $(M)
  75   endif
  76 endif
  77
  78
  79 # kbuild supports saving output files in a separate directory.
  80 # To locate output files in a separate directory two syntaxes are supported.
  81 # In both cases the working directory must be the root of the kernel src.
  82 # 1) O=
  83 # Use "make O=dir/to/store/output/files/"
  84 #
  85 # 2) Set KBUILD_OUTPUT
  86 # Set the environment variable KBUILD_OUTPUT to point to the directory
  87 # where the output files shall be placed.
  88 # export KBUILD_OUTPUT=dir/to/store/output/files/
  89 # make
  90 #
  91 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  92 # variable.
  93
  94
  95 # KBUILD_SRC is set on invocation of make in OBJ directory
  96 # KBUILD_SRC is not intended to be used by the regular user (for now)
  97 ifeq ($(KBUILD_SRC),)
  98
  99 # OK, Make called in directory where kernel src resides
 100 # Do we want to locate output files in a separate directory?
 101 ifdef O
 102   ifeq ("$(origin O)", "command line")
 103     KBUILD_OUTPUT := $(O)
 104   endif
 105 endif
 106
 107 # That's our default target when none is given on the command line
 108 PHONY := _all
 109 _all:
 110
 111 # Cancel implicit rules on top Makefile
 112 $(CURDIR)/Makefile Makefile: ;
 113
 114 ifneq ($(KBUILD_OUTPUT),)
 115 # Invoke a second make in the output directory, passing relevant variables
 116 # check that the output directory actually exists
 117 saved-output := $(KBUILD_OUTPUT)
 118 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 119 $(if $(KBUILD_OUTPUT),, \
 120      $(error output directory "$(saved-output)" does not exist))
 121
 122 PHONY += $(MAKECMDGOALS) sub-make
 123
 124 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 125         $(Q)@:
 126
 127 sub-make: FORCE
 128         $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 129         KBUILD_SRC=$(CURDIR) \
 130         KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
 131         $(filter-out _all sub-make,$(MAKECMDGOALS))
 132
 133 # Leave processing to above invocation of make
 134 skip-makefile := 1
 135 endif # ifneq ($(KBUILD_OUTPUT),)
 136 endif # ifeq ($(KBUILD_SRC),)
 137
 138 # We process the rest of the Makefile if this is the final invocation of make
 139 ifeq ($(skip-makefile),)
 140
 141 # If building an external module we do not care about the all: rule
 142 # but instead _all depend on modules
 143 PHONY += all
 144 ifeq ($(KBUILD_EXTMOD),)
 145 _all: all
 146 else
 147 _all: modules
 148 endif
 149
 150 srctree         := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
 151 TOPDIR          := $(srctree)
 152 # FIXME - TOPDIR is obsolete, use srctree/objtree
 153 objtree         := $(CURDIR)
 154 src             := $(srctree)
 155 obj             := $(objtree)
 156
 157 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 158
 159 export srctree objtree VPATH TOPDIR
 160
 161
 162 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 163 # first, and if a usermode build is happening, the "ARCH=um" on the command
 164 # line overrides the setting of ARCH below.  If a native build is happening,
 165 # then ARCH is assigned, getting whatever value it gets normally, and
 166 # SUBARCH is subsequently ignored.
 167
 168 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 169                                   -e s/arm.*/arm/ -e s/sa110/arm/ \
 170                                   -e s/s390x/s390/ -e s/parisc64/parisc/ \
 171                                   -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 172                                   -e s/sh.*/sh/ )
 173
 174 # Cross compiling and selecting different set of gcc/bin-utils
 175 # ---------------------------------------------------------------------------
 176 #
 177 # When performing cross compilation for other architectures ARCH shall be set
 178 # to the target architecture. (See arch/* for the possibilities).
 179 # ARCH can be set during invocation of make:
 180 # make ARCH=ia64
 181 # Another way is to have ARCH set in the environment.
 182 # The default ARCH is the host where make is executed.
 183
 184 # CROSS_COMPILE specify the prefix used for all executables used
 185 # during compilation. Only gcc and related bin-utils executables
 186 # are prefixed with $(CROSS_COMPILE).
 187 # CROSS_COMPILE can be set on the command line
 188 # make CROSS_COMPILE=ia64-linux-
 189 # Alternatively CROSS_COMPILE can be set in the environment.
 190 # Default value for CROSS_COMPILE is not to prefix executables
 191 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 192 export KBUILD_BUILDHOST := $(SUBARCH)
 193 ARCH            ?= $(SUBARCH)
 194 CROSS_COMPILE   ?=
 195
 196 # Architecture as present in compile.h
 197 UTS_MACHINE     := $(ARCH)
 198 SRCARCH         := $(ARCH)
 199
 200 # Additional ARCH settings for x86
 201 ifeq ($(ARCH),i386)
 202         SRCARCH := x86
 203 endif
 204 ifeq ($(ARCH),x86_64)
 205         SRCARCH := x86
 206 endif
 207
 208 KCONFIG_CONFIG  ?= .config
 209
 210 # SHELL used by kbuild
 211 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 212           else if [ -x /bin/bash ]; then echo /bin/bash; \
 213           else echo sh; fi ; fi)
 214
 215 HOSTCC       = gcc
 216 HOSTCXX      = g++
 217 HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
 218 HOSTCXXFLAGS = -O2
 219
 220 # Decide whether to build built-in, modular, or both.
 221 # Normally, just do built-in.
 222
 223 KBUILD_MODULES :=
 224 KBUILD_BUILTIN := 1
 225
 226 #       If we have only "make modules", don't compile built-in objects.
 227 #       When we're building modules with modversions, we need to consider
 228 #       the built-in objects during the descend as well, in order to
 229 #       make sure the checksums are up to date before we record them.
 230
 231 ifeq ($(MAKECMDGOALS),modules)
 232   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 233 endif
 234
 235 #       If we have "make <whatever> modules", compile modules
 236 #       in addition to whatever we do anyway.
 237 #       Just "make" or "make all" shall build modules as well
 238
 239 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 240   KBUILD_MODULES := 1
 241 endif
 242
 243 ifeq ($(MAKECMDGOALS),)
 244   KBUILD_MODULES := 1
 245 endif
 246
 247 export KBUILD_MODULES KBUILD_BUILTIN
 248 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 249
 250 # Beautify output
 251 # ---------------------------------------------------------------------------
 252 #
 253 # Normally, we echo the whole command before executing it. By making
 254 # that echo $($(quiet)$(cmd)), we now have the possibility to set
 255 # $(quiet) to choose other forms of output instead, e.g.
 256 #
 257 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
 258 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
 259 #
 260 # If $(quiet) is empty, the whole command will be printed.
 261 # If it is set to "quiet_", only the short version will be printed.
 262 # If it is set to "silent_", nothing will be printed at all, since
 263 # the variable $(silent_cmd_cc_o_c) doesn't exist.
 264 #
 265 # A simple variant is to prefix commands with $(Q) - that's useful
 266 # for commands that shall be hidden in non-verbose mode.
 267 #
 268 #       $(Q)ln $@ :<
 269 #
 270 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
 271 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
 272
 273 ifeq ($(KBUILD_VERBOSE),1)
 274   quiet =
 275   Q =
 276 else
 277   quiet=quiet_
 278   Q = @
 279 endif
 280
 281 # If the user is running make -s (silent mode), suppress echoing of
 282 # commands
 283
 284 ifneq ($(findstring s,$(MAKEFLAGS)),)
 285   quiet=silent_
 286 endif
 287
 288 export quiet Q KBUILD_VERBOSE
 289
 290
 291 # Look for make include files relative to root of kernel src
 292 MAKEFLAGS += --include-dir=$(srctree)
 293
 294 # We need some generic definitions (do not try to remake the file).
 295 $(srctree)/scripts/Kbuild.include: ;
 296 include $(srctree)/scripts/Kbuild.include
 297
 298 # Make variables (CC, etc...)
 299
 300 AS              = $(CROSS_COMPILE)as
 301 LD              = $(CROSS_COMPILE)ld
 302 CC              = $(CROSS_COMPILE)gcc
 303 CPP             = $(CC) -E
 304 AR              = $(CROSS_COMPILE)ar
 305 NM              = $(CROSS_COMPILE)nm
 306 STRIP           = $(CROSS_COMPILE)strip
 307 OBJCOPY         = $(CROSS_COMPILE)objcopy
 308 OBJDUMP         = $(CROSS_COMPILE)objdump
 309 AWK             = awk
 310 GENKSYMS        = scripts/genksyms/genksyms
 311 DEPMOD          = /sbin/depmod
 312 KALLSYMS        = scripts/kallsyms
 313 PERL            = perl
 314 CHECK           = sparse
 315
 316 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
 317 MODFLAGS        = -DMODULE
 318 CFLAGS_MODULE   = $(MODFLAGS)
 319 AFLAGS_MODULE   = $(MODFLAGS)
 320 LDFLAGS_MODULE  =
 321 CFLAGS_KERNEL   =
 322 AFLAGS_KERNEL   =
 323
 324
 325 # Use LINUXINCLUDE when you must reference the include/ directory.
 326 # Needed to be compatible with the O= option
 327 LINUXINCLUDE    := -Iinclude \
 328                    $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
 329                    -include include/linux/autoconf.h
 330
 331 KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
 332
 333 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 334                    -fno-strict-aliasing -fno-common \
 335                    -Werror-implicit-function-declaration
 336 KBUILD_AFLAGS   := -D__ASSEMBLY__
 337
 338 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 339 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 340 KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 341
 342 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 343 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 344 export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
 345 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 346
 347 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 348 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 349 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 350
 351 # When compiling out-of-tree modules, put MODVERDIR in the module
 352 # tree rather than in the kernel tree. The kernel tree might
 353 # even be read-only.
 354 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 355
 356 # Files to ignore in find ... statements
 357
 358 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
 359 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
 360
 361 # ===========================================================================
 362 # Rules shared between *config targets and build targets
 363
 364 # Basic helpers built in scripts/
 365 PHONY += scripts_basic
 366 scripts_basic:
 367         $(Q)$(MAKE) $(build)=scripts/basic
 368
 369 # To avoid any implicit rule to kick in, define an empty command.
 370 scripts/basic/%: scripts_basic ;
 371
 372 PHONY += outputmakefile
 373 # outputmakefile generates a Makefile in the output directory, if using a
 374 # separate output directory. This allows convenient use of make in the
 375 # output directory.
 376 outputmakefile:
 377 ifneq ($(KBUILD_SRC),)
 378         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 379             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 380 endif
 381
 382 # To make sure we do not include .config for any of the *config targets
 383 # catch them early, and hand them over to scripts/kconfig/Makefile
 384 # It is allowed to specify more targets when calling make, including
 385 # mixing *config targets and build targets.
 386 # For example 'make oldconfig all'.
 387 # Detect when mixed targets is specified, and make a second invocation
 388 # of make so .config is not included in this case either (for *config).
 389
 390 no-dot-config-targets := clean mrproper distclean \
 391                          cscope TAGS tags help %docs check% \
 392                          include/linux/version.h headers_% \
 393                          kernelrelease kernelversion
 394
 395 config-targets := 0
 396 mixed-targets  := 0
 397 dot-config     := 1
 398
 399 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 400         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 401                 dot-config := 0
 402         endif
 403 endif
 404
 405 ifeq ($(KBUILD_EXTMOD),)
 406         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 407                 config-targets := 1
 408                 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
 409                         mixed-targets := 1
 410                 endif
 411         endif
 412 endif
 413
 414 ifeq ($(mixed-targets),1)
 415 # ===========================================================================
 416 # We're called with mixed targets (*config and build targets).
 417 # Handle them one by one.
 418
 419 %:: FORCE
 420         $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
 421
 422 else
 423 ifeq ($(config-targets),1)
 424 # ===========================================================================
 425 # *config targets only - make sure prerequisites are updated, and descend
 426 # in scripts/kconfig to make the *config target
 427
 428 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 429 # KBUILD_DEFCONFIG may point out an alternative default configuration
 430 # used for 'make defconfig'
 431 include $(srctree)/arch/$(SRCARCH)/Makefile
 432 export KBUILD_DEFCONFIG
 433
 434 config %config: scripts_basic outputmakefile FORCE
 435         $(Q)mkdir -p include/linux include/config
 436         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 437
 438 else
 439 # ===========================================================================
 440 # Build targets only - this includes vmlinux, arch specific targets, clean
 441 # targets and others. In general all targets except *config targets.
 442
 443 ifeq ($(KBUILD_EXTMOD),)
 444 # Additional helpers built in scripts/
 445 # Carefully list dependencies so we do not try to build scripts twice
 446 # in parallel
 447 PHONY += scripts
 448 scripts: scripts_basic include/config/auto.conf
 449         $(Q)$(MAKE) $(build)=$(@)
 450
 451 # Objects we will link into vmlinux / subdirs we need to visit
 452 init-y          := init/
 453 drivers-y       := drivers/ sound/
 454 net-y           := net/
 455 libs-y          := lib/
 456 core-y          := usr/
 457 endif # KBUILD_EXTMOD
 458
 459 ifeq ($(dot-config),1)
 460 # Read in config
 461 -include include/config/auto.conf
 462
 463 ifeq ($(KBUILD_EXTMOD),)
 464 # Read in dependencies to all Kconfig* files, make sure to run
 465 # oldconfig if changes are detected.
 466 -include include/config/auto.conf.cmd
 467
 468 # To avoid any implicit rule to kick in, define an empty command
 469 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 470
 471 # If .config is newer than include/config/auto.conf, someone tinkered
 472 # with it and forgot to run make oldconfig.
 473 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 474 # we execute the config step to be sure to catch updated Kconfig files
 475 include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 476         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 477 else
 478 # external modules needs include/linux/autoconf.h and include/config/auto.conf
 479 # but do not care if they are up-to-date. Use auto.conf to trigger the test
 480 PHONY += include/config/auto.conf
 481
 482 include/config/auto.conf:
 483         $(Q)test -e include/linux/autoconf.h -a -e $@ || (              \
 484         echo;                                                           \
 485         echo "  ERROR: Kernel configuration is invalid.";               \
 486         echo "         include/linux/autoconf.h or $@ are missing.";    \
 487         echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
 488         echo;                                                           \
 489         /bin/false)
 490
 491 endif # KBUILD_EXTMOD
 492
 493 else
 494 # Dummy target needed, because used as prerequisite
 495 include/config/auto.conf: ;
 496 endif # $(dot-config)
 497
 498 # The all: target is the default when no target is given on the
 499 # command line.
 500 # This allow a user to issue only 'make' to build a kernel including modules
 501 # Defaults vmlinux but it is usually overridden in the arch makefile
 502 all: vmlinux
 503
 504 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 505 KBUILD_CFLAGS   += -Os
 506 else
 507 KBUILD_CFLAGS   += -O2
 508 endif
 509
 510 ifneq (CONFIG_FRAME_WARN,0)
 511 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 512 endif
 513
 514 # Force gcc to behave correct even for buggy distributions
 515 # Arch Makefiles may override this setting
 516 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 517
 518 include $(srctree)/arch/$(SRCARCH)/Makefile
 519
 520 ifdef CONFIG_FRAME_POINTER
 521 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
 522 else
 523 KBUILD_CFLAGS   += -fomit-frame-pointer
 524 endif
 525
 526 ifdef CONFIG_DEBUG_INFO
 527 KBUILD_CFLAGS   += -g
 528 KBUILD_AFLAGS   += -gdwarf-2
 529 endif
 530
 531 # We trigger additional mismatches with less inlining
 532 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 533 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 534 endif
 535
 536 # arch Makefile may override CC so keep this after arch Makefile is included
 537 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 538 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 539
 540 # warn about C99 declaration after statement
 541 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 542
 543 # disable pointer signed / unsigned warnings in gcc 4.0
 544 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 545
 546 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 547 # But warn user when we do so
 548 warn-assign = \
 549 $(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
 550
 551 ifneq ($(KCPPFLAGS),)
 552         $(call warn-assign,CPPFLAGS)
 553         KBUILD_CPPFLAGS += $(KCPPFLAGS)
 554 endif
 555 ifneq ($(KAFLAGS),)
 556         $(call warn-assign,AFLAGS)
 557         KBUILD_AFLAGS += $(KAFLAGS)
 558 endif
 559 ifneq ($(KCFLAGS),)
 560         $(call warn-assign,CFLAGS)
 561         KBUILD_CFLAGS += $(KCFLAGS)
 562 endif
 563
 564 # Use --build-id when available.
 565 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 566                               $(call ld-option, -Wl$(comma)--build-id,))
 567 LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 568 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 569
 570 # Default kernel image to build when no specific target is given.
 571 # KBUILD_IMAGE may be overruled on the command line or
 572 # set in the environment
 573 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 574 # this default value
 575 export KBUILD_IMAGE ?= vmlinux
 576
 577 #
 578 # INSTALL_PATH specifies where to place the updated kernel and system map
 579 # images. Default is /boot, but you can set it to other values
 580 export  INSTALL_PATH ?= /boot
 581
 582 #
 583 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 584 # relocations required by build roots.  This is not defined in the
 585 # makefile but the argument can be passed to make if needed.
 586 #
 587
 588 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 589 export MODLIB
 590
 591 #
 592 #  INSTALL_MOD_STRIP, if defined, will cause modules to be
 593 #  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
 594 #  the default option --strip-debug will be used.  Otherwise,
 595 #  INSTALL_MOD_STRIP will used as the options to the strip command.
 596
 597 ifdef INSTALL_MOD_STRIP
 598 ifeq ($(INSTALL_MOD_STRIP),1)
 599 mod_strip_cmd = $(STRIP) --strip-debug
 600 else
 601 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 602 endif # INSTALL_MOD_STRIP=1
 603 else
 604 mod_strip_cmd = true
 605 endif # INSTALL_MOD_STRIP
 606 export mod_strip_cmd
 607
 608
 609 ifeq ($(KBUILD_EXTMOD),)
 610 core-y          += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
 611
 612 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 613                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
 614                      $(net-y) $(net-m) $(libs-y) $(libs-m)))
 615
 616 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 617                      $(init-n) $(init-) \
 618                      $(core-n) $(core-) $(drivers-n) $(drivers-) \
 619                      $(net-n)  $(net-)  $(libs-n)    $(libs-))))
 620
 621 init-y          := $(patsubst %/, %/built-in.o, $(init-y))
 622 core-y          := $(patsubst %/, %/built-in.o, $(core-y))
 623 drivers-y       := $(patsubst %/, %/built-in.o, $(drivers-y))
 624 net-y           := $(patsubst %/, %/built-in.o, $(net-y))
 625 libs-y1         := $(patsubst %/, %/lib.a, $(libs-y))
 626 libs-y2         := $(patsubst %/, %/built-in.o, $(libs-y))
 627 libs-y          := $(libs-y1) $(libs-y2)
 628
 629 # Build vmlinux
 630 # ---------------------------------------------------------------------------
 631 # vmlinux is built from the objects selected by $(vmlinux-init) and
 632 # $(vmlinux-main). Most are built-in.o files from top-level directories
 633 # in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
 634 # Ordering when linking is important, and $(vmlinux-init) must be first.
 635 #
 636 # vmlinux
 637 #   ^
 638 #   |
 639 #   +-< $(vmlinux-init)
 640 #   |   +--< init/version.o + more
 641 #   |
 642 #   +--< $(vmlinux-main)
 643 #   |    +--< driver/built-in.o mm/built-in.o + more
 644 #   |
 645 #   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
 646 #
 647 # vmlinux version (uname -v) cannot be updated during normal
 648 # descending-into-subdirs phase since we do not yet know if we need to
 649 # update vmlinux.
 650 # Therefore this step is delayed until just before final link of vmlinux -
 651 # except in the kallsyms case where it is done just before adding the
 652 # symbols to the kernel.
 653 #
 654 # System.map is generated to document addresses of all kernel symbols
 655
 656 vmlinux-init := $(head-y) $(init-y)
 657 vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
 658 vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
 659 vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
 660 export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
 661
 662 # Rule to link vmlinux - also used during CONFIG_KALLSYMS
 663 # May be overridden by arch/$(ARCH)/Makefile
 664 quiet_cmd_vmlinux__ ?= LD      $@
 665       cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
 666       -T $(vmlinux-lds) $(vmlinux-init)                          \
 667       --start-group $(vmlinux-main) --end-group                  \
 668       $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
 669
 670 # Generate new vmlinux version
 671 quiet_cmd_vmlinux_version = GEN     .version
 672       cmd_vmlinux_version = set -e;                     \
 673         if [ ! -r .version ]; then                      \
 674           rm -f .version;                               \
 675           echo 1 >.version;                             \
 676         else                                            \
 677           mv .version .old_version;                     \
 678           expr 0$$(cat .old_version) + 1 >.version;     \
 679         fi;                                             \
 680         $(MAKE) $(build)=init
 681
 682 # Generate System.map
 683 quiet_cmd_sysmap = SYSMAP
 684       cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 685
 686 # Link of vmlinux
 687 # If CONFIG_KALLSYMS is set .version is already updated
 688 # Generate System.map and verify that the content is consistent
 689 # Use + in front of the vmlinux_version rule to silent warning with make -j2
 690 # First command is ':' to allow us to use + in front of the rule
 691 define rule_vmlinux__
 692         :
 693         $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
 694
 695         $(call cmd,vmlinux__)
 696         $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
 697
 698         $(Q)$(if $($(quiet)cmd_sysmap),                                      \
 699           echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
 700         $(cmd_sysmap) $@ System.map;                                         \
 701         if [ $$? -ne 0 ]; then                                               \
 702                 rm -f $@;                                                    \
 703                 /bin/false;                                                  \
 704         fi;
 705         $(verify_kallsyms)
 706 endef
 707
 708
 709 ifdef CONFIG_KALLSYMS
 710 # Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
 711 # It's a three stage process:
 712 # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
 713 #   empty
 714 #   Running kallsyms on that gives us .tmp_kallsyms1.o with
 715 #   the right size - vmlinux version (uname -v) is updated during this step
 716 # o .tmp_vmlinux2 now has a __kallsyms section of the right size,
 717 #   but due to the added section, some addresses have shifted.
 718 #   From here, we generate a correct .tmp_kallsyms2.o
 719 # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
 720 # o Verify that the System.map from vmlinux matches the map from
 721 #   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
 722 # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
 723 #   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
 724 #   temporary bypass to allow the kernel to be built while the
 725 #   maintainers work out what went wrong with kallsyms.
 726
 727 ifdef CONFIG_KALLSYMS_EXTRA_PASS
 728 last_kallsyms := 3
 729 else
 730 last_kallsyms := 2
 731 endif
 732
 733 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
 734
 735 define verify_kallsyms
 736         $(Q)$(if $($(quiet)cmd_sysmap),                                      \
 737           echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
 738           $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
 739         $(Q)cmp -s System.map .tmp_System.map ||                             \
 740                 (echo Inconsistent kallsyms data;                            \
 741                  echo Try setting CONFIG_KALLSYMS_EXTRA_PASS;                \
 742                  rm .tmp_kallsyms* ; /bin/false )
 743 endef
 744
 745 # Update vmlinux version before link
 746 # Use + in front of this rule to silent warning about make -j1
 747 # First command is ':' to allow us to use + in front of this rule
 748 cmd_ksym_ld = $(cmd_vmlinux__)
 749 define rule_ksym_ld
 750         :
 751         +$(call cmd,vmlinux_version)
 752         $(call cmd,vmlinux__)
 753         $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
 754 endef
 755
 756 # Generate .S file with all kernel symbols
 757 quiet_cmd_kallsyms = KSYM    $@
 758       cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
 759                      $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 760
 761 .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
 762         $(call if_changed_dep,as_o_S)
 763
 764 .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
 765         $(call cmd,kallsyms)
 766
 767 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
 768 .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
 769         $(call if_changed_rule,ksym_ld)
 770
 771 .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
 772         $(call if_changed,vmlinux__)
 773
 774 .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
 775         $(call if_changed,vmlinux__)
 776
 777 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 778 $(KALLSYMS): scripts ;
 779
 780 # Generate some data for debugging strange kallsyms problems
 781 debug_kallsyms: .tmp_map$(last_kallsyms)
 782
 783 .tmp_map%: .tmp_vmlinux% FORCE
 784         ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
 785
 786 .tmp_map3: .tmp_map2
 787
 788 .tmp_map2: .tmp_map1
 789
 790 endif # ifdef CONFIG_KALLSYMS
 791
 792 # Do modpost on a prelinked vmlinux. The finally linked vmlinux has
 793 # relevant sections renamed as per the linker script.
 794 quiet_cmd_vmlinux-modpost = LD      $@
 795       cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
 796          $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
 797          $(filter-out $(vmlinux-init) $(vmlinux-main) $(vmlinux-lds) FORCE ,$^)
 798 define rule_vmlinux-modpost
 799         :
 800         +$(call cmd,vmlinux-modpost)
 801         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
 802         $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
 803 endef
 804
 805 # vmlinux image - including updated kernel symbols
 806 vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
 807 ifdef CONFIG_HEADERS_CHECK
 808         $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 809 endif
 810 ifdef CONFIG_SAMPLES
 811         $(Q)$(MAKE) $(build)=samples
 812 endif
 813         $(call vmlinux-modpost)
 814         $(call if_changed_rule,vmlinux__)
 815         $(Q)rm -f .old_version
 816
 817 # build vmlinux.o first to catch section mismatch errors early
 818 ifdef CONFIG_KALLSYMS
 819 .tmp_vmlinux1: vmlinux.o
 820 endif
 821 vmlinux.o: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE
 822         $(call if_changed_rule,vmlinux-modpost)
 823
 824 # The actual objects are generated when descending,
 825 # make sure no implicit rule kicks in
 826 $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
 827
 828 # Handle descending into subdirectories listed in $(vmlinux-dirs)
 829 # Preset locale variables to speed up the build process. Limit locale
 830 # tweaks to this spot to avoid wrong language settings when running
 831 # make menuconfig etc.
 832 # Error messages still appears in the original language
 833
 834 PHONY += $(vmlinux-dirs)
 835 $(vmlinux-dirs): prepare scripts
 836         $(Q)$(MAKE) $(build)=$@
 837
 838 # Build the kernel release string
 839 #
 840 # The KERNELRELEASE value built here is stored in the file
 841 # include/config/kernel.release, and is used when executing several
 842 # make targets, such as "make install" or "make modules_install."
 843 #
 844 # The eventual kernel release string consists of the following fields,
 845 # shown in a hierarchical format to show how smaller parts are concatenated
 846 # to form the larger and final value, with values coming from places like
 847 # the Makefile, kernel config options, make command line options and/or
 848 # SCM tag information.
 849 #
 850 #       $(KERNELVERSION)
 851 #         $(VERSION)                    eg, 2
 852 #         $(PATCHLEVEL)                 eg, 6
 853 #         $(SUBLEVEL)                   eg, 18
 854 #         $(EXTRAVERSION)               eg, -rc6
 855 #       $(localver-full)
 856 #         $(localver)
 857 #           localversion*               (files without backups, containing '~')
 858 #           $(CONFIG_LOCALVERSION)      (from kernel config setting)
 859 #         $(localver-auto)              (only if CONFIG_LOCALVERSION_AUTO is set)
 860 #           ./scripts/setlocalversion   (SCM tag, if one exists)
 861 #           $(LOCALVERSION)             (from make command line if provided)
 862 #
 863 #  Note how the final $(localver-auto) string is included *only* if the
 864 # kernel config option CONFIG_LOCALVERSION_AUTO is selected.  Also, at the
 865 # moment, only git is supported but other SCMs can edit the script
 866 # scripts/setlocalversion and add the appropriate checks as needed.
 867
 868 pattern = ".*/localversion[^~]*"
 869 string  = $(shell cat /dev/null \
 870            `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
 871
 872 localver = $(subst $(space),, $(string) \
 873                               $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
 874
 875 # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
 876 # and if the SCM is know a tag from the SCM is appended.
 877 # The appended tag is determined by the SCM used.
 878 #
 879 # Currently, only git is supported.
 880 # Other SCMs can edit scripts/setlocalversion and add the appropriate
 881 # checks as needed.
 882 ifdef CONFIG_LOCALVERSION_AUTO
 883         _localver-auto = $(shell $(CONFIG_SHELL) \
 884                           $(srctree)/scripts/setlocalversion $(srctree))
 885         localver-auto  = $(LOCALVERSION)$(_localver-auto)
 886 endif
 887
 888 localver-full = $(localver)$(localver-auto)
 889
 890 # Store (new) KERNELRELASE string in include/config/kernel.release
 891 kernelrelease = $(KERNELVERSION)$(localver-full)
 892 include/config/kernel.release: include/config/auto.conf FORCE
 893         $(Q)rm -f $@
 894         $(Q)echo $(kernelrelease) > $@
 895
 896
 897 # Things we need to do before we recursively start building the kernel
 898 # or the modules are listed in "prepare".
 899 # A multi level approach is used. prepareN is processed before prepareN-1.
 900 # archprepare is used in arch Makefiles and when processed asm symlink,
 901 # version.h and scripts_basic is processed / created.
 902
 903 # Listed in dependency order
 904 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 905
 906 # prepare3 is used to check if we are building in a separate output directory,
 907 # and if so do:
 908 # 1) Check that make has not been executed in the kernel src $(srctree)
 909 # 2) Create the include2 directory, used for the second asm symlink
 910 prepare3: include/config/kernel.release
 911 ifneq ($(KBUILD_SRC),)
 912         @echo '  Using $(srctree) as source for kernel'
 913         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
 914                 echo "  $(srctree) is not clean, please run 'make mrproper'";\
 915                 echo "  in the '$(srctree)' directory.";\
 916                 /bin/false; \
 917         fi;
 918         $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
 919         $(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
 920 endif
 921
 922 # prepare2 creates a makefile if using a separate output directory
 923 prepare2: prepare3 outputmakefile
 924
 925 prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
 926                    include/asm include/config/auto.conf
 927         $(cmd_crmodverdir)
 928
 929 archprepare: prepare1 scripts_basic
 930
 931 prepare0: archprepare FORCE
 932         $(Q)$(MAKE) $(build)=.
 933         $(Q)$(MAKE) $(build)=. missing-syscalls
 934
 935 # All the preparing..
 936 prepare: prepare0
 937
 938 # Leave this as default for preprocessing vmlinux.lds.S, which is now
 939 # done in arch/$(ARCH)/kernel/Makefile
 940
 941 export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 942
 943 # The asm symlink changes when $(ARCH) changes.
 944 # Detect this and ask user to run make mrproper
 945
 946 include/asm: FORCE
 947         $(Q)set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`;   \
 948         if [ -L include/asm ]; then                                     \
 949                 if [ "$$asmlink" != "$(SRCARCH)" ]; then                \
 950                         echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
 951                         echo "       set ARCH or save .config and run 'make mrproper' to fix it";             \
 952                         exit 1;                                         \
 953                 fi;                                                     \
 954         else                                                            \
 955                 echo '  SYMLINK $@ -> include/asm-$(SRCARCH)';          \
 956                 if [ ! -d include ]; then                               \
 957                         mkdir -p include;                               \
 958                 fi;                                                     \
 959                 ln -fsn asm-$(SRCARCH) $@;                              \
 960         fi
 961
 962 # Generate some files
 963 # ---------------------------------------------------------------------------
 964
 965 # KERNELRELEASE can change from a few different places, meaning version.h
 966 # needs to be updated, so this check is forced on all builds
 967
 968 uts_len := 64
 969 define filechk_utsrelease.h
 970         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
 971           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
 972           exit 1;                                                         \
 973         fi;                                                               \
 974         (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
 975 endef
 976
 977 define filechk_version.h
 978         (echo \#define LINUX_VERSION_CODE $(shell                             \
 979         expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL));     \
 980         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 981 endef
 982
 983 include/linux/version.h: $(srctree)/Makefile FORCE
 984         $(call filechk,version.h)
 985
 986 include/linux/utsrelease.h: include/config/kernel.release FORCE
 987         $(call filechk,utsrelease.h)
 988
 989 # ---------------------------------------------------------------------------
 990
 991 PHONY += depend dep
 992 depend dep:
 993         @echo '*** Warning: make $@ is unnecessary now.'
 994
 995 # ---------------------------------------------------------------------------
 996 # Kernel headers
 997 INSTALL_HDR_PATH=$(objtree)/usr
 998 export INSTALL_HDR_PATH
 999
1000 HDRFILTER=generic i386 x86_64
1001 HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
1002
1003 PHONY += headers_install_all
1004 headers_install_all: include/linux/version.h scripts_basic FORCE
1005         $(Q)$(MAKE) $(build)=scripts scripts/unifdef
1006         $(Q)for arch in $(HDRARCHES); do \
1007          $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
1008          done
1009
1010 PHONY += headers_install
1011 headers_install: include/linux/version.h scripts_basic FORCE
1012         @if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
1013           echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
1014           exit 1 ; fi
1015         $(Q)$(MAKE) $(build)=scripts scripts/unifdef
1016         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
1017
1018 PHONY += headers_check_all
1019 headers_check_all: headers_install_all
1020         $(Q)for arch in $(HDRARCHES); do \
1021          $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
1022          done
1023
1024 PHONY += headers_check
1025 headers_check: headers_install
1026         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
1027
1028 # ---------------------------------------------------------------------------
1029 # Modules
1030
1031 ifdef CONFIG_MODULES
1032
1033 # By default, build modules as well
1034
1035 all: modules
1036
1037 #       Build modules
1038 #
1039 #       A module can be listed more than once in obj-m resulting in
1040 #       duplicate lines in modules.order files.  Those are removed
1041 #       using awk while concatenating to the final file.
1042
1043 PHONY += modules
1044 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
1045         $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1046         @echo '  Building modules, stage 2.';
1047         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1048
1049
1050 # Target to prepare building external modules
1051 PHONY += modules_prepare
1052 modules_prepare: prepare scripts
1053
1054 # Target to install modules
1055 PHONY += modules_install
1056 modules_install: _modinst_ _modinst_post
1057
1058 PHONY += _modinst_
1059 _modinst_:
1060         @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
1061                 echo "Warning: you may need to install module-init-tools"; \
1062                 echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
1063                 sleep 1; \
1064         fi
1065         @rm -rf $(MODLIB)/kernel
1066         @rm -f $(MODLIB)/source
1067         @mkdir -p $(MODLIB)/kernel
1068         @ln -s $(srctree) $(MODLIB)/source
1069         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1070                 rm -f $(MODLIB)/build ; \
1071                 ln -s $(objtree) $(MODLIB)/build ; \
1072         fi
1073         @cp -f $(objtree)/modules.order $(MODLIB)/
1074         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1075
1076 # This depmod is only for convenience to give the initial
1077 # boot a modules.dep even before / is mounted read-write.  However the
1078 # boot script depmod is the master version.
1079 PHONY += _modinst_post
1080 _modinst_post: _modinst_
1081         $(call cmd,depmod)
1082
1083 else # CONFIG_MODULES
1084
1085 # Modules not configured
1086 # ---------------------------------------------------------------------------
1087
1088 modules modules_install: FORCE
1089         @echo
1090         @echo "The present kernel configuration has modules disabled."
1091         @echo "Type 'make config' and enable loadable module support."
1092         @echo "Then build a kernel with module support enabled."
1093         @echo
1094         @exit 1
1095
1096 endif # CONFIG_MODULES
1097
1098 ###
1099 # Cleaning is done on three levels.
1100 # make clean     Delete most generated files
1101 #                Leave enough to build external modules
1102 # make mrproper  Delete the current configuration, and all generated files
1103 # make distclean Remove editor backup files, patch leftover files and the like
1104
1105 # Directories & files removed with 'make clean'
1106 CLEAN_DIRS  += $(MODVERDIR)
1107 CLEAN_FILES +=  vmlinux System.map \
1108                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
1109
1110 # Directories & files removed with 'make mrproper'
1111 MRPROPER_DIRS  += include/config include2 usr/include
1112 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
1113                   include/linux/autoconf.h include/linux/version.h      \
1114                   include/linux/utsrelease.h                            \
1115                   Module.symvers tags TAGS cscope*
1116
1117 # clean - Delete most, but leave enough to build external modules
1118 #
1119 clean: rm-dirs  := $(CLEAN_DIRS)
1120 clean: rm-files := $(CLEAN_FILES)
1121 clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
1122
1123 PHONY += $(clean-dirs) clean archclean
1124 $(clean-dirs):
1125         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1126
1127 clean: archclean $(clean-dirs)
1128         $(call cmd,rmdirs)
1129         $(call cmd,rmfiles)
1130         @find . $(RCS_FIND_IGNORE) \
1131                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1132                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1133                 -o -name '*.symtypes' -o -name 'modules.order' \) \
1134                 -type f -print | xargs rm -f
1135
1136 # mrproper - Delete all generated files, including .config
1137 #
1138 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1139 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1140 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1141
1142 PHONY += $(mrproper-dirs) mrproper archmrproper
1143 $(mrproper-dirs):
1144         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1145
1146 mrproper: clean archmrproper $(mrproper-dirs)
1147         $(call cmd,rmdirs)
1148         $(call cmd,rmfiles)
1149
1150 # distclean
1151 #
1152 PHONY += distclean
1153
1154 distclean: mrproper
1155         @find $(srctree) $(RCS_FIND_IGNORE) \
1156                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1157                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1158                 -o -name '.*.rej' -o -size 0 \
1159                 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1160                 -type f -print | xargs rm -f
1161
1162
1163 # Packaging of the kernel to various formats
1164 # ---------------------------------------------------------------------------
1165 # rpm target kept for backward compatibility
1166 package-dir     := $(srctree)/scripts/package
1167
1168 %pkg: include/config/kernel.release FORCE
1169         $(Q)$(MAKE) $(build)=$(package-dir) $@
1170 rpm: include/config/kernel.release FORCE
1171         $(Q)$(MAKE) $(build)=$(package-dir) $@
1172
1173
1174 # Brief documentation of the typical targets used
1175 # ---------------------------------------------------------------------------
1176
1177 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1178 boards := $(notdir $(boards))
1179 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1180 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1181
1182 help:
1183         @echo  'Cleaning targets:'
1184         @echo  '  clean           - Remove most generated files but keep the config and'
1185         @echo  '                    enough build support to build external modules'
1186         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1187         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1188         @echo  ''
1189         @echo  'Configuration targets:'
1190         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1191         @echo  ''
1192         @echo  'Other generic targets:'
1193         @echo  '  all             - Build all targets marked with [*]'
1194         @echo  '* vmlinux         - Build the bare kernel'
1195         @echo  '* modules         - Build all modules'
1196         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1197         @echo  '  dir/            - Build all files in dir and below'
1198         @echo  '  dir/file.[ois]  - Build specified target only'
1199         @echo  '  dir/file.ko     - Build module including final link'
1200         @echo  '  prepare         - Set up for building external modules'
1201         @echo  '  tags/TAGS       - Generate tags file for editors'
1202         @echo  '  cscope          - Generate cscope index'
1203         @echo  '  kernelrelease   - Output the release version string'
1204         @echo  '  kernelversion   - Output the version stored in Makefile'
1205         @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
1206          echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1207          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1208          fi
1209         @echo  ''
1210         @echo  'Static analysers'
1211         @echo  '  checkstack      - Generate a list of stack hogs'
1212         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1213         @echo  '  versioncheck    - Sanity check on version.h usage'
1214         @echo  '  includecheck    - Check for duplicate included header files'
1215         @echo  '  export_report   - List the usages of all exported symbols'
1216         @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
1217          echo  '  headers_check   - Sanity check on exported headers'; \
1218          fi
1219         @echo  ''
1220         @echo  'Kernel packaging:'
1221         @$(MAKE) $(build)=$(package-dir) help
1222         @echo  ''
1223         @echo  'Documentation targets:'
1224         @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1225         @echo  ''
1226         @echo  'Architecture specific targets ($(SRCARCH)):'
1227         @$(if $(archhelp),$(archhelp),\
1228                 echo '  No architecture specific help defined for $(SRCARCH)')
1229         @echo  ''
1230         @$(if $(boards), \
1231                 $(foreach b, $(boards), \
1232                 printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1233                 echo '')
1234         @$(if $(board-dirs), \
1235                 $(foreach b, $(board-dirs), \
1236                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1237                 printf "  %-16s - Show all of the above\\n" help-boards; \
1238                 echo '')
1239
1240         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1241         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1242         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1243         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1244         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1245         @echo  ''
1246         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1247         @echo  'For further info see the ./README file'
1248
1249
1250 help-board-dirs := $(addprefix help-,$(board-dirs))
1251
1252 help-boards: $(help-board-dirs)
1253
1254 boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1255
1256 $(help-board-dirs): help-%:
1257         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1258         @$(if $(boards-per-dir), \
1259                 $(foreach b, $(boards-per-dir), \
1260                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1261                 echo '')
1262
1263
1264 # Documentation targets
1265 # ---------------------------------------------------------------------------
1266 %docs: scripts_basic FORCE
1267         $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1268
1269 else # KBUILD_EXTMOD
1270
1271 ###
1272 # External module support.
1273 # When building external modules the kernel used as basis is considered
1274 # read-only, and no consistency checks are made and the make
1275 # system is not used on the basis kernel. If updates are required
1276 # in the basis kernel ordinary make commands (without M=...) must
1277 # be used.
1278 #
1279 # The following are the only valid targets when building external
1280 # modules.
1281 # make M=dir clean     Delete all automatically generated files
1282 # make M=dir modules   Make all modules in specified dir
1283 # make M=dir           Same as 'make M=dir modules'
1284 # make M=dir modules_install
1285 #                      Install the modules built in the module directory
1286 #                      Assumes install directory is already created
1287
1288 # We are always building modules
1289 KBUILD_MODULES := 1
1290 PHONY += crmodverdir
1291 crmodverdir:
1292         $(cmd_crmodverdir)
1293
1294 PHONY += $(objtree)/Module.symvers
1295 $(objtree)/Module.symvers:
1296         @test -e $(objtree)/Module.symvers || ( \
1297         echo; \
1298         echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1299         echo "           is missing; modules will have no dependencies and modversions."; \
1300         echo )
1301
1302 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1303 PHONY += $(module-dirs) modules
1304 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1305         $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1306
1307 modules: $(module-dirs)
1308         @echo '  Building modules, stage 2.';
1309         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1310
1311 PHONY += modules_install
1312 modules_install: _emodinst_ _emodinst_post
1313
1314 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1315 PHONY += _emodinst_
1316 _emodinst_:
1317         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1318         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1319
1320 PHONY += _emodinst_post
1321 _emodinst_post: _emodinst_
1322         $(call cmd,depmod)
1323
1324 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1325
1326 PHONY += $(clean-dirs) clean
1327 $(clean-dirs):
1328         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1329
1330 clean:  rm-dirs := $(MODVERDIR)
1331 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1332 clean: $(clean-dirs)
1333         $(call cmd,rmdirs)
1334         $(call cmd,rmfiles)
1335         @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
1336                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1337                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
1338                 -type f -print | xargs rm -f
1339
1340 help:
1341         @echo  '  Building external modules.'
1342         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1343         @echo  ''
1344         @echo  '  modules         - default target, build the module(s)'
1345         @echo  '  modules_install - install the module'
1346         @echo  '  clean           - remove generated files in module directory only'
1347         @echo  ''
1348
1349 # Dummies...
1350 PHONY += prepare scripts
1351 prepare: ;
1352 scripts: ;
1353 endif # KBUILD_EXTMOD
1354
1355 # Generate tags for editors
1356 # ---------------------------------------------------------------------------
1357
1358 #We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
1359 #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
1360 #Adding $(srctree) adds about 20M on i386 to the size of the output file!
1361
1362 ifeq ($(src),$(obj))
1363 __srctree =
1364 else
1365 __srctree = $(srctree)/
1366 endif
1367
1368 ifeq ($(ALLSOURCE_ARCHS),)
1369 ifeq ($(ARCH),um)
1370 ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
1371 else
1372 ALLINCLUDE_ARCHS := $(SRCARCH)
1373 endif
1374 else
1375 #Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
1376 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
1377 endif
1378
1379 ALLSOURCE_ARCHS := $(SRCARCH)
1380
1381 define find-sources
1382         ( for arch in $(ALLSOURCE_ARCHS) ; do \
1383                find $(__srctree)arch/$${arch} $(RCS_FIND_IGNORE) \
1384                     -name $1 -print; \
1385           done ; \
1386           find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
1387                -name $1 -print; \
1388           find $(__srctree)include $(RCS_FIND_IGNORE) \
1389                \( -name config -o -name 'asm-*' \) -prune \
1390                -o -name $1 -print; \
1391           for arch in $(ALLINCLUDE_ARCHS) ; do \
1392                find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
1393                     -name $1 -print; \
1394           done ; \
1395           find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
1396                -name $1 -print; \
1397           find $(__srctree) $(RCS_FIND_IGNORE) \
1398                \( -name include -o -name arch -o -name '.tmp_*' \) -prune -o \
1399                -name $1 -print; \
1400           )
1401 endef
1402
1403 define all-sources
1404         $(call find-sources,'*.[chS]')
1405 endef
1406 define all-kconfigs
1407         $(call find-sources,'Kconfig*')
1408 endef
1409 define all-defconfigs
1410         $(call find-sources,'defconfig')
1411 endef
1412
1413 define xtags
1414         if $1 --version 2>&1 | grep -iq exuberant; then \
1415             $(all-sources) | xargs $1 -a \
1416                 -I __initdata,__exitdata,__acquires,__releases \
1417                 -I __read_mostly,____cacheline_aligned,____cacheline_aligned_in_smp,____cacheline_internodealigned_in_smp \
1418                 -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
1419                 --extra=+f --c-kinds=+px \
1420                 --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'; \
1421             $(all-kconfigs) | xargs $1 -a \
1422                 --langdef=kconfig \
1423                 --language-force=kconfig \
1424                 --regex-kconfig='/^[[:blank:]]*(menu|)config[[:blank:]]+([[:alnum:]_]+)/\2/'; \
1425             $(all-defconfigs) | xargs -r $1 -a \
1426                 --langdef=dotconfig \
1427                 --language-force=dotconfig \
1428                 --regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \
1429         elif $1 --version 2>&1 | grep -iq emacs; then \
1430             $(all-sources) | xargs $1 -a; \
1431             $(all-kconfigs) | xargs $1 -a \
1432                 --regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
1433             $(all-defconfigs) | xargs -r $1 -a \
1434                 --regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
1435         else \
1436             $(all-sources) | xargs $1 -a; \
1437         fi
1438 endef
1439
1440 quiet_cmd_cscope-file = FILELST cscope.files
1441       cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
1442
1443 quiet_cmd_cscope = MAKE    cscope.out
1444       cmd_cscope = cscope -b
1445
1446 cscope: FORCE
1447         $(call cmd,cscope-file)
1448         $(call cmd,cscope)
1449
1450 quiet_cmd_TAGS = MAKE   $@
1451 define cmd_TAGS
1452         rm -f $@; \
1453         $(call xtags,etags)
1454 endef
1455
1456 TAGS: FORCE
1457         $(call cmd,TAGS)
1458
1459 quiet_cmd_tags = MAKE   $@
1460 define cmd_tags
1461         rm -f $@; \
1462         $(call xtags,ctags)
1463 endef
1464
1465 tags: FORCE
1466         $(call cmd,tags)
1467
1468
1469 # Scripts to check various things for consistency
1470 # ---------------------------------------------------------------------------
1471
1472 includecheck:
1473         find * $(RCS_FIND_IGNORE) \
1474                 -name '*.[hcS]' -type f -print | sort \
1475                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1476
1477 versioncheck:
1478         find * $(RCS_FIND_IGNORE) \
1479                 -name '*.[hcS]' -type f -print | sort \
1480                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1481
1482 namespacecheck:
1483         $(PERL) $(srctree)/scripts/namespace.pl
1484
1485 export_report:
1486         $(PERL) $(srctree)/scripts/export_report.pl
1487
1488 endif #ifeq ($(config-targets),1)
1489 endif #ifeq ($(mixed-targets),1)
1490
1491 PHONY += checkstack kernelrelease kernelversion
1492
1493 # UML needs a little special treatment here.  It wants to use the host
1494 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1495 # else wants $(ARCH), including people doing cross-builds, which means
1496 # that $(SUBARCH) doesn't work here.
1497 ifeq ($(ARCH), um)
1498 CHECKSTACK_ARCH := $(SUBARCH)
1499 else
1500 CHECKSTACK_ARCH := $(ARCH)
1501 endif
1502 checkstack:
1503         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1504         $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1505
1506 kernelrelease:
1507         $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
1508         $(error kernelrelease not valid - run 'make prepare' to update it))
1509 kernelversion:
1510         @echo $(KERNELVERSION)
1511
1512 # Single targets
1513 # ---------------------------------------------------------------------------
1514 # Single targets are compatible with:
1515 # - build with mixed source and output
1516 # - build with separate output dir 'make O=...'
1517 # - external modules
1518 #
1519 #  target-dir => where to store outputfile
1520 #  build-dir  => directory in kernel source tree to use
1521
1522 ifeq ($(KBUILD_EXTMOD),)
1523         build-dir  = $(patsubst %/,%,$(dir $@))
1524         target-dir = $(dir $@)
1525 else
1526         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1527         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1528         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1529 endif
1530
1531 %.s: %.c prepare scripts FORCE
1532         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1533 %.i: %.c prepare scripts FORCE
1534         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1535 %.o: %.c prepare scripts FORCE
1536         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1537 %.lst: %.c prepare scripts FORCE
1538         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1539 %.s: %.S prepare scripts FORCE
1540         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1541 %.o: %.S prepare scripts FORCE
1542         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1543 %.symtypes: %.c prepare scripts FORCE
1544         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1545
1546 # Modules
1547 / %/: prepare scripts FORCE
1548         $(cmd_crmodverdir)
1549         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1550         $(build)=$(build-dir)
1551 %.ko: prepare scripts FORCE
1552         $(cmd_crmodverdir)
1553         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1554         $(build)=$(build-dir) $(@:.ko=.o)
1555         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1556
1557 # FIXME Should go into a make.lib or something
1558 # ===========================================================================
1559
1560 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1561       cmd_rmdirs = rm -rf $(rm-dirs)
1562
1563 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1564       cmd_rmfiles = rm -f $(rm-files)
1565
1566 # Run depmod only if we have System.map and depmod is executable
1567 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1568       cmd_depmod = \
1569         if [ -r System.map -a -x $(DEPMOD) ]; then                              \
1570                 $(DEPMOD) -ae -F System.map                                     \
1571                 $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
1572                 $(KERNELRELEASE);                                               \
1573         fi
1574
1575 # Create temporary dir for module support files
1576 # clean it up only when building all modules
1577 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1578                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1579
1580 a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
1581           $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
1582           $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
1583
1584 quiet_cmd_as_o_S = AS      $@
1585 cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
1586
1587 # read all saved command lines
1588
1589 targets := $(wildcard $(sort $(targets)))
1590 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1591
1592 ifneq ($(cmd_files),)
1593   $(cmd_files): ;       # Do not try to update included dependency files
1594   include $(cmd_files)
1595 endif
1596
1597 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1598 # Usage:
1599 # $(Q)$(MAKE) $(clean)=dir
1600 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1601
1602 endif   # skip-makefile
1603
1604 PHONY += FORCE
1605 FORCE:
1606
1607 # Declare the contents of the .PHONY variable as phony.  We keep that
1608 # information in a variable se we can use it in if_changed and friends.
1609 .PHONY: $(PHONY)