include/linux/wanrouter.h

   1 /*****************************************************************************
   2 * wanrouter.h   Definitions for the WAN Multiprotocol Router Module.
   3 *               This module provides API and common services for WAN Link
   4 *               Drivers and is completely hardware-independent.
   5 *
   6 * Author:       Nenad Corbic <ncorbic@sangoma.com>
   7 *               Gideon Hack
   8 * Additions:    Arnaldo Melo
   9 *
  10 * Copyright:    (c) 1995-2000 Sangoma Technologies Inc.
  11 *
  12 *               This program is free software; you can redistribute it and/or
  13 *               modify it under the terms of the GNU General Public License
  14 *               as published by the Free Software Foundation; either version
  15 *               2 of the License, or (at your option) any later version.
  16 * ============================================================================
  17 * Jul 21, 2000  Nenad Corbic    Added WAN_FT1_READY State
  18 * Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
  19 * Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
  20 * Oct 04, 1999  Nenad Corbic    Updated for 2.1.0 release
  21 * Jun 02, 1999  Gideon Hack     Added support for the S514 adapter.
  22 * May 23, 1999  Arnaldo Melo    Added local_addr to wanif_conf_t
  23 *                               WAN_DISCONNECTING state added
  24 * Jul 20, 1998  David Fong      Added Inverse ARP options to 'wanif_conf_t'
  25 * Jun 12, 1998  David Fong      Added Cisco HDLC support.
  26 * Dec 16, 1997  Jaspreet Singh  Moved 'enable_IPX' and 'network_number' to
  27 *                               'wanif_conf_t'
  28 * Dec 05, 1997  Jaspreet Singh  Added 'pap', 'chap' to 'wanif_conf_t'
  29 *                               Added 'authenticator' to 'wan_ppp_conf_t'
  30 * Nov 06, 1997  Jaspreet Singh  Changed Router Driver version to 1.1 from 1.0
  31 * Oct 20, 1997  Jaspreet Singh  Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
  32 *                               Added 'enable_IPX' and 'network_number' to
  33 *                               'wan_device_t'.  Also added defines for
  34 *                               UDP PACKET TYPE, Interrupt test, critical values
  35 *                               for RACE conditions.
  36 * Oct 05, 1997  Jaspreet Singh  Added 'dlci_num' and 'dlci[100]' to
  37 *                               'wan_fr_conf_t' to configure a list of dlci(s)
  38 *                               for a NODE
  39 * Jul 07, 1997  Jaspreet Singh  Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
  40 * May 29, 1997  Jaspreet Singh  Added 'tx_int_enabled' to 'wan_device_t'
  41 * May 21, 1997  Jaspreet Singh  Added 'udp_port' to 'wan_device_t'
  42 * Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
  43 * Jan 16, 1997  Gene Kozin      router_devlist made public
  44 * Jan 02, 1997  Gene Kozin      Initial version (based on wanpipe.h).
  45 *****************************************************************************/
  46
  47 #ifndef _ROUTER_H
  48 #define _ROUTER_H
  49
  50 #define ROUTER_NAME     "wanrouter"     /* in case we ever change it */
  51 #define ROUTER_VERSION  1               /* version number */
  52 #define ROUTER_RELEASE  1               /* release (minor version) number */
  53 #define ROUTER_IOCTL    'W'             /* for IOCTL calls */
  54 #define ROUTER_MAGIC    0x524D4157L     /* signature: 'WANR' reversed */
  55
  56 /* IOCTL codes for /proc/router/<device> entries (up to 255) */
  57 enum router_ioctls
  58 {
  59         ROUTER_SETUP    = ROUTER_IOCTL<<8,      /* configure device */
  60         ROUTER_DOWN,                            /* shut down device */
  61         ROUTER_STAT,                            /* get device status */
  62         ROUTER_IFNEW,                           /* add interface */
  63         ROUTER_IFDEL,                           /* delete interface */
  64         ROUTER_IFSTAT,                          /* get interface status */
  65         ROUTER_USER     = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */
  66         ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31
  67 };
  68
  69 /* identifiers for displaying proc file data for dual port adapters */
  70 #define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */
  71 #define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */
  72
  73 /* NLPID for packet encapsulation (ISO/IEC TR 9577) */
  74 #define NLPID_IP        0xCC    /* Internet Protocol Datagram */
  75 #define NLPID_SNAP      0x80    /* IEEE Subnetwork Access Protocol */
  76 #define NLPID_CLNP      0x81    /* ISO/IEC 8473 */
  77 #define NLPID_ESIS      0x82    /* ISO/IEC 9542 */
  78 #define NLPID_ISIS      0x83    /* ISO/IEC ISIS */
  79 #define NLPID_Q933      0x08    /* CCITT Q.933 */
  80
  81 /* Miscellaneous */
  82 #define WAN_IFNAME_SZ   15      /* max length of the interface name */
  83 #define WAN_DRVNAME_SZ  15      /* max length of the link driver name */
  84 #define WAN_ADDRESS_SZ  31      /* max length of the WAN media address */
  85 #define USED_BY_FIELD   8       /* max length of the used by field */
  86
  87 /* Defines for UDP PACKET TYPE */
  88 #define UDP_PTPIPE_TYPE         0x01
  89 #define UDP_FPIPE_TYPE          0x02
  90 #define UDP_CPIPE_TYPE          0x03
  91 #define UDP_DRVSTATS_TYPE       0x04
  92 #define UDP_INVALID_TYPE        0x05
  93
  94 /* Command return code */
  95 #define CMD_OK          0               /* normal firmware return code */
  96 #define CMD_TIMEOUT     0xFF            /* firmware command timed out */
  97
  98 /* UDP Packet Management */
  99 #define UDP_PKT_FRM_STACK       0x00
 100 #define UDP_PKT_FRM_NETWORK     0x01
 101
 102 /* Maximum interrupt test counter */
 103 #define MAX_INTR_TEST_COUNTER   100
 104
 105 /* Critical Values for RACE conditions*/
 106 #define CRITICAL_IN_ISR         0xA1
 107 #define CRITICAL_INTR_HANDLED   0xB1
 108
 109 /****** Data Types **********************************************************/
 110
 111 /*----------------------------------------------------------------------------
 112  * X.25-specific link-level configuration.
 113  */
 114 typedef struct wan_x25_conf
 115 {
 116         unsigned lo_pvc;        /* lowest permanent circuit number */
 117         unsigned hi_pvc;        /* highest permanent circuit number */
 118         unsigned lo_svc;        /* lowest switched circuit number */
 119         unsigned hi_svc;        /* highest switched circuit number */
 120         unsigned hdlc_window;   /* HDLC window size (1..7) */
 121         unsigned pkt_window;    /* X.25 packet window size (1..7) */
 122         unsigned t1;            /* HDLC timer T1, sec (1..30) */
 123         unsigned t2;            /* HDLC timer T2, sec (0..29) */
 124         unsigned t4;            /* HDLC supervisory frame timer = T4 * T1 */
 125         unsigned n2;            /* HDLC retransmission limit (1..30) */
 126         unsigned t10_t20;       /* X.25 RESTART timeout, sec (1..255) */
 127         unsigned t11_t21;       /* X.25 CALL timeout, sec (1..255) */
 128         unsigned t12_t22;       /* X.25 RESET timeout, sec (1..255) */
 129         unsigned t13_t23;       /* X.25 CLEAR timeout, sec (1..255) */
 130         unsigned t16_t26;       /* X.25 INTERRUPT timeout, sec (1..255) */
 131         unsigned t28;           /* X.25 REGISTRATION timeout, sec (1..255) */
 132         unsigned r10_r20;       /* RESTART retransmission limit (0..250) */
 133         unsigned r12_r22;       /* RESET retransmission limit (0..250) */
 134         unsigned r13_r23;       /* CLEAR retransmission limit (0..250) */
 135         unsigned ccitt_compat;  /* compatibility mode: 1988/1984/1980 */
 136         unsigned x25_conf_opt;   /* User defined x25 config optoins */
 137         unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
 138         unsigned char logging;   /* Control connection logging */
 139         unsigned char oob_on_modem; /* Whether to send modem status to the user app */
 140 } wan_x25_conf_t;
 141
 142 /*----------------------------------------------------------------------------
 143  * Frame relay specific link-level configuration.
 144  */
 145 typedef struct wan_fr_conf
 146 {
 147         unsigned signalling;    /* local in-channel signalling type */
 148         unsigned t391;          /* link integrity verification timer */
 149         unsigned t392;          /* polling verification timer */
 150         unsigned n391;          /* full status polling cycle counter */
 151         unsigned n392;          /* error threshold counter */
 152         unsigned n393;          /* monitored events counter */
 153         unsigned dlci_num;      /* number of DLCs (access node) */
 154         unsigned  dlci[100];    /* List of all DLCIs */
 155 } wan_fr_conf_t;
 156
 157 /*----------------------------------------------------------------------------
 158  * PPP-specific link-level configuration.
 159  */
 160 typedef struct wan_ppp_conf
 161 {
 162         unsigned restart_tmr;   /* restart timer */
 163         unsigned auth_rsrt_tmr; /* authentication timer */
 164         unsigned auth_wait_tmr; /* authentication timer */
 165         unsigned mdm_fail_tmr;  /* modem failure timer */
 166         unsigned dtr_drop_tmr;  /* DTR drop timer */
 167         unsigned connect_tmout; /* connection timeout */
 168         unsigned conf_retry;    /* max. retry */
 169         unsigned term_retry;    /* max. retry */
 170         unsigned fail_retry;    /* max. retry */
 171         unsigned auth_retry;    /* max. retry */
 172         unsigned auth_options;  /* authentication opt. */
 173         unsigned ip_options;    /* IP options */
 174         char    authenticator;  /* AUTHENTICATOR or not */
 175         char    ip_mode;        /* Static/Host/Peer */
 176 } wan_ppp_conf_t;
 177
 178 /*----------------------------------------------------------------------------
 179  * CHDLC-specific link-level configuration.
 180  */
 181 typedef struct wan_chdlc_conf
 182 {
 183         unsigned char ignore_dcd;       /* Protocol options:            */
 184         unsigned char ignore_cts;       /*  Ignore these to determine   */
 185         unsigned char ignore_keepalive; /*  link status (Yes or No)     */
 186         unsigned char hdlc_streaming;   /*  hdlc_streaming mode (Y/N) */
 187         unsigned char receive_only;     /*  no transmit buffering (Y/N) */
 188         unsigned keepalive_tx_tmr;      /* transmit keepalive timer */
 189         unsigned keepalive_rx_tmr;      /* receive  keepalive timer */
 190         unsigned keepalive_err_margin;  /* keepalive_error_tolerance */
 191         unsigned slarp_timer;           /* SLARP request timer */
 192 } wan_chdlc_conf_t;
 193
 194
 195 /*----------------------------------------------------------------------------
 196  * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
 197  */
 198 typedef struct wandev_conf
 199 {
 200         unsigned magic;         /* magic number (for verification) */
 201         unsigned config_id;     /* configuration structure identifier */
 202                                 /****** hardware configuration ******/
 203         unsigned ioport;        /* adapter I/O port base */
 204         unsigned long maddr;    /* dual-port memory address */
 205         unsigned msize;         /* dual-port memory size */
 206         int irq;                /* interrupt request level */
 207         int dma;                /* DMA request level */
 208         char S514_CPU_no[1];    /* S514 PCI adapter CPU number ('A' or 'B') */
 209         unsigned PCI_slot_no;   /* S514 PCI adapter slot number */
 210         char auto_pci_cfg;      /* S515 PCI automatic slot detection */
 211         char comm_port;         /* Communication Port (PRI=0, SEC=1) */
 212         unsigned bps;           /* data transfer rate */
 213         unsigned mtu;           /* maximum transmit unit size */
 214         unsigned udp_port;      /* UDP port for management */
 215         unsigned char ttl;      /* Time To Live for UDP security */
 216         unsigned char ft1;      /* FT1 Configurator Option */
 217         char interface;         /* RS-232/V.35, etc. */
 218         char clocking;          /* external/internal */
 219         char line_coding;       /* NRZ/NRZI/FM0/FM1, etc. */
 220         char station;           /* DTE/DCE, primary/secondary, etc. */
 221         char connection;        /* permanent/switched/on-demand */
 222         char read_mode;         /* read mode: Polling or interrupt */
 223         char receive_only;      /* disable tx buffers */
 224         char tty;               /* Create a fake tty device */
 225         unsigned tty_major;     /* Major number for wanpipe tty device */
 226         unsigned tty_minor;     /* Minor number for wanpipe tty device */
 227         unsigned tty_mode;      /* TTY operation mode SYNC or ASYNC */
 228         char backup;            /* Backup Mode */
 229         unsigned hw_opt[4];     /* other hardware options */
 230         unsigned reserved[4];
 231                                 /****** arbitrary data ***************/
 232         unsigned data_size;     /* data buffer size */
 233         void* data;             /* data buffer, e.g. firmware */
 234         union                   /****** protocol-specific ************/
 235         {
 236                 wan_x25_conf_t x25;     /* X.25 configuration */
 237                 wan_ppp_conf_t ppp;     /* PPP configuration */
 238                 wan_fr_conf_t fr;       /* frame relay configuration */
 239                 wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */
 240         } u;
 241 } wandev_conf_t;
 242
 243 /* 'config_id' definitions */
 244 #define WANCONFIG_X25   101     /* X.25 link */
 245 #define WANCONFIG_FR    102     /* frame relay link */
 246 #define WANCONFIG_PPP   103     /* synchronous PPP link */
 247 #define WANCONFIG_CHDLC 104     /* Cisco HDLC Link */
 248 #define WANCONFIG_BSC   105     /* BiSync Streaming */
 249 #define WANCONFIG_HDLC  106     /* HDLC Support */
 250 #define WANCONFIG_MPPP  107     /* Multi Port PPP over RAW CHDLC */
 251
 252 /*
 253  * Configuration options defines.
 254  */
 255 /* general options */
 256 #define WANOPT_OFF      0
 257 #define WANOPT_ON       1
 258 #define WANOPT_NO       0
 259 #define WANOPT_YES      1
 260
 261 /* intercace options */
 262 #define WANOPT_RS232    0
 263 #define WANOPT_V35      1
 264
 265 /* data encoding options */
 266 #define WANOPT_NRZ      0
 267 #define WANOPT_NRZI     1
 268 #define WANOPT_FM0      2
 269 #define WANOPT_FM1      3
 270
 271 /* link type options */
 272 #define WANOPT_POINTTOPOINT     0       /* RTS always active */
 273 #define WANOPT_MULTIDROP        1       /* RTS is active when transmitting */
 274
 275 /* clocking options */
 276 #define WANOPT_EXTERNAL 0
 277 #define WANOPT_INTERNAL 1
 278
 279 /* station options */
 280 #define WANOPT_DTE              0
 281 #define WANOPT_DCE              1
 282 #define WANOPT_CPE              0
 283 #define WANOPT_NODE             1
 284 #define WANOPT_SECONDARY        0
 285 #define WANOPT_PRIMARY          1
 286
 287 /* connection options */
 288 #define WANOPT_PERMANENT        0       /* DTR always active */
 289 #define WANOPT_SWITCHED         1       /* use DTR to setup link (dial-up) */
 290 #define WANOPT_ONDEMAND         2       /* activate DTR only before sending */
 291
 292 /* frame relay in-channel signalling */
 293 #define WANOPT_FR_ANSI          1       /* ANSI T1.617 Annex D */
 294 #define WANOPT_FR_Q933          2       /* ITU Q.933A */
 295 #define WANOPT_FR_LMI           3       /* LMI */
 296
 297 /* PPP IP Mode Options */
 298 #define WANOPT_PPP_STATIC       0
 299 #define WANOPT_PPP_HOST         1
 300 #define WANOPT_PPP_PEER         2
 301
 302 /* ASY Mode Options */
 303 #define WANOPT_ONE              1
 304 #define WANOPT_TWO              2
 305 #define WANOPT_ONE_AND_HALF     3
 306
 307 #define WANOPT_NONE     0
 308 #define WANOPT_ODD      1
 309 #define WANOPT_EVEN     2
 310
 311 /* CHDLC Protocol Options */
 312 /* DF Commmented out for now.
 313
 314 #define WANOPT_CHDLC_NO_DCD             IGNORE_DCD_FOR_LINK_STAT
 315 #define WANOPT_CHDLC_NO_CTS             IGNORE_CTS_FOR_LINK_STAT
 316 #define WANOPT_CHDLC_NO_KEEPALIVE       IGNORE_KPALV_FOR_LINK_STAT
 317 */
 318
 319 /* Port options */
 320 #define WANOPT_PRI 0
 321 #define WANOPT_SEC 1
 322 /* read mode */
 323 #define WANOPT_INTR     0
 324 #define WANOPT_POLL     1
 325
 326
 327 #define WANOPT_TTY_SYNC  0
 328 #define WANOPT_TTY_ASYNC 1
 329 /*----------------------------------------------------------------------------
 330  * WAN Link Status Info (for ROUTER_STAT IOCTL).
 331  */
 332 typedef struct wandev_stat
 333 {
 334         unsigned state;         /* link state */
 335         unsigned ndev;          /* number of configured interfaces */
 336
 337         /* link/interface configuration */
 338         unsigned connection;    /* permanent/switched/on-demand */
 339         unsigned media_type;    /* Frame relay/PPP/X.25/SDLC, etc. */
 340         unsigned mtu;           /* max. transmit unit for this device */
 341
 342         /* physical level statistics */
 343         unsigned modem_status;  /* modem status */
 344         unsigned rx_frames;     /* received frames count */
 345         unsigned rx_overruns;   /* receiver overrun error count */
 346         unsigned rx_crc_err;    /* receive CRC error count */
 347         unsigned rx_aborts;     /* received aborted frames count */
 348         unsigned rx_bad_length; /* unexpetedly long/short frames count */
 349         unsigned rx_dropped;    /* frames discarded at device level */
 350         unsigned tx_frames;     /* transmitted frames count */
 351         unsigned tx_underruns;  /* aborted transmissions (underruns) count */
 352         unsigned tx_timeouts;   /* transmission timeouts */
 353         unsigned tx_rejects;    /* other transmit errors */
 354
 355         /* media level statistics */
 356         unsigned rx_bad_format; /* frames with invalid format */
 357         unsigned rx_bad_addr;   /* frames with invalid media address */
 358         unsigned tx_retries;    /* frames re-transmitted */
 359         unsigned reserved[16];  /* reserved for future use */
 360 } wandev_stat_t;
 361
 362 /* 'state' defines */
 363 enum wan_states
 364 {
 365         WAN_UNCONFIGURED,       /* link/channel is not configured */
 366         WAN_DISCONNECTED,       /* link/channel is disconnected */
 367         WAN_CONNECTING,         /* connection is in progress */
 368         WAN_CONNECTED,          /* link/channel is operational */
 369         WAN_LIMIT,              /* for verification only */
 370         WAN_DUALPORT,           /* for Dual Port cards */
 371         WAN_DISCONNECTING,
 372         WAN_FT1_READY           /* FT1 Configurator Ready */
 373 };
 374
 375 enum {
 376         WAN_LOCAL_IP,
 377         WAN_POINTOPOINT_IP,
 378         WAN_NETMASK_IP,
 379         WAN_BROADCAST_IP
 380 };
 381
 382 /* 'modem_status' masks */
 383 #define WAN_MODEM_CTS   0x0001  /* CTS line active */
 384 #define WAN_MODEM_DCD   0x0002  /* DCD line active */
 385 #define WAN_MODEM_DTR   0x0010  /* DTR line active */
 386 #define WAN_MODEM_RTS   0x0020  /* RTS line active */
 387
 388 /*----------------------------------------------------------------------------
 389  * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
 390  */
 391 typedef struct wanif_conf
 392 {
 393         unsigned magic;                 /* magic number */
 394         unsigned config_id;             /* configuration identifier */
 395         char name[WAN_IFNAME_SZ+1];     /* interface name, ASCIIZ */
 396         char addr[WAN_ADDRESS_SZ+1];    /* media address, ASCIIZ */
 397         char usedby[USED_BY_FIELD];     /* used by API or WANPIPE */
 398         unsigned idle_timeout;          /* sec, before disconnecting */
 399         unsigned hold_timeout;          /* sec, before re-connecting */
 400         unsigned cir;                   /* Committed Information Rate fwd,bwd*/
 401         unsigned bc;                    /* Committed Burst Size fwd, bwd */
 402         unsigned be;                    /* Excess Burst Size fwd, bwd */
 403         unsigned char enable_IPX;       /* Enable or Disable IPX */
 404         unsigned char inarp;            /* Send Inverse ARP requests Y/N */
 405         unsigned inarp_interval;        /* sec, between InARP requests */
 406         unsigned long network_number;   /* Network Number for IPX */
 407         char mc;                        /* Multicast on or off */
 408         char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
 409         unsigned char port;             /* board port */
 410         unsigned char protocol;         /* prococol used in this channel (TCPOX25 or X25) */
 411         char pap;                       /* PAP enabled or disabled */
 412         char chap;                      /* CHAP enabled or disabled */
 413         unsigned char userid[511];      /* List of User Id */
 414         unsigned char passwd[511];      /* List of passwords */
 415         unsigned char sysname[31];      /* Name of the system */
 416         unsigned char ignore_dcd;       /* Protocol options: */
 417         unsigned char ignore_cts;       /*  Ignore these to determine */
 418         unsigned char ignore_keepalive; /*  link status (Yes or No) */
 419         unsigned char hdlc_streaming;   /*  Hdlc streaming mode (Y/N) */
 420         unsigned keepalive_tx_tmr;      /* transmit keepalive timer */
 421         unsigned keepalive_rx_tmr;      /* receive  keepalive timer */
 422         unsigned keepalive_err_margin;  /* keepalive_error_tolerance */
 423         unsigned slarp_timer;           /* SLARP request timer */
 424         unsigned char ttl;              /* Time To Live for UDP security */
 425         char interface;                 /* RS-232/V.35, etc. */
 426         char clocking;                  /* external/internal */
 427         unsigned bps;                   /* data transfer rate */
 428         unsigned mtu;                   /* maximum transmit unit size */
 429         unsigned char if_down;          /* brind down interface when disconnected */
 430         unsigned char gateway;          /* Is this interface a gateway */
 431         unsigned char true_if_encoding; /* Set the dev->type to true board protocol */
 432
 433         unsigned char asy_data_trans;     /* async API options */
 434         unsigned char rts_hs_for_receive; /* async Protocol options */
 435         unsigned char xon_xoff_hs_for_receive;
 436         unsigned char xon_xoff_hs_for_transmit;
 437         unsigned char dcd_hs_for_transmit;
 438         unsigned char cts_hs_for_transmit;
 439         unsigned char async_mode;
 440         unsigned tx_bits_per_char;
 441         unsigned rx_bits_per_char;
 442         unsigned stop_bits;
 443         unsigned char parity;
 444         unsigned break_timer;
 445         unsigned inter_char_timer;
 446         unsigned rx_complete_length;
 447         unsigned xon_char;
 448         unsigned xoff_char;
 449         unsigned char receive_only;     /*  no transmit buffering (Y/N) */
 450 } wanif_conf_t;
 451
 452 #ifdef  __KERNEL__
 453 /****** Kernel Interface ****************************************************/
 454
 455 #include <linux/fs.h>           /* support for device drivers */
 456 #include <linux/proc_fs.h>      /* proc filesystem pragmatics */
 457 #include <linux/netdevice.h>    /* support for network drivers */
 458 #include <linux/spinlock.h>     /* Support for SMP Locking */
 459
 460 /*----------------------------------------------------------------------------
 461  * WAN device data space.
 462  */
 463 struct wan_device {
 464         unsigned magic;                 /* magic number */
 465         char* name;                     /* -> WAN device name (ASCIIZ) */
 466         void* private;                  /* -> driver private data */
 467         unsigned config_id;             /* Configuration ID */
 468                                         /****** hardware configuration ******/
 469         unsigned ioport;                /* adapter I/O port base #1 */
 470         char S514_cpu_no[1];            /* PCI CPU Number */
 471         unsigned char S514_slot_no;     /* PCI Slot Number */
 472         unsigned long maddr;            /* dual-port memory address */
 473         unsigned msize;                 /* dual-port memory size */
 474         int irq;                        /* interrupt request level */
 475         int dma;                        /* DMA request level */
 476         unsigned bps;                   /* data transfer rate */
 477         unsigned mtu;                   /* max physical transmit unit size */
 478         unsigned udp_port;              /* UDP port for management */
 479         unsigned char ttl;              /* Time To Live for UDP security */
 480         unsigned enable_tx_int;         /* Transmit Interrupt enabled or not */
 481         char interface;                 /* RS-232/V.35, etc. */
 482         char clocking;                  /* external/internal */
 483         char line_coding;               /* NRZ/NRZI/FM0/FM1, etc. */
 484         char station;                   /* DTE/DCE, primary/secondary, etc. */
 485         char connection;                /* permanent/switched/on-demand */
 486         char signalling;                /* Signalling RS232 or V35 */
 487         char read_mode;                 /* read mode: Polling or interrupt */
 488         char new_if_cnt;                /* Number of interfaces per wanpipe */
 489         char del_if_cnt;                /* Number of times del_if() gets called */
 490         unsigned char piggyback;        /* Piggibacking a port */
 491         unsigned hw_opt[4];             /* other hardware options */
 492                                         /****** status and statistics *******/
 493         char state;                     /* device state */
 494         char api_status;                /* device api status */
 495         struct net_device_stats stats;  /* interface statistics */
 496         unsigned reserved[16];          /* reserved for future use */
 497         unsigned long critical;         /* critical section flag */
 498         spinlock_t lock;                /* Support for SMP Locking */
 499
 500                                         /****** device management methods ***/
 501         int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
 502         int (*shutdown) (struct wan_device *wandev);
 503         int (*update) (struct wan_device *wandev);
 504         int (*ioctl) (struct wan_device *wandev, unsigned cmd,
 505                 unsigned long arg);
 506         int (*new_if)(struct wan_device *wandev, struct net_device *dev,
 507                       wanif_conf_t *conf);
 508         int (*del_if)(struct wan_device *wandev, struct net_device *dev);
 509                                         /****** maintained by the router ****/
 510         struct wan_device* next;        /* -> next device */
 511         struct net_device* dev;         /* list of network interfaces */
 512         unsigned ndev;                  /* number of interfaces */
 513         struct proc_dir_entry *dent;    /* proc filesystem entry */
 514 };
 515
 516 /* Public functions available for device drivers */
 517 extern int register_wan_device(struct wan_device *wandev);
 518 extern int unregister_wan_device(char *name);
 519
 520 /* Proc interface functions. These must not be called by the drivers! */
 521 extern int wanrouter_proc_init(void);
 522 extern void wanrouter_proc_cleanup(void);
 523 extern int wanrouter_proc_add(struct wan_device *wandev);
 524 extern int wanrouter_proc_delete(struct wan_device *wandev);
 525 extern int wanrouter_ioctl( struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
 526
 527 /* Public Data */
 528 /* list of registered devices */
 529 extern struct wan_device *wanrouter_router_devlist;
 530
 531 #endif  /* __KERNEL__ */
 532 #endif  /* _ROUTER_H */